korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-16 07:24:39 +08:00
Code Issues Packages Projects Releases Wiki Activity
1f2f98f270
linux/arch/arm64/boot/dts/freescale
History
Krzysztof Kozlowski 1f2f98f270 arm64: dts: imx8mq: Fix TMU interrupt property 
"interrupt" is not a valid property.  Using proper name fixes dtbs_check
warning:

  arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dt.yaml: tmu@30260000: 'interrupts' is a required property

Fixes: e464fd2ba4 ("arm64: dts: imx8mq: enable the multi sensor TMU")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-08-31 14:03:48 +08:00
..
fsl-ls208xa-qds.dtsi arm64: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller 2018-12-16 16:24:01 +08:00
fsl-ls208xa-rdb.dtsi arm64: dts: ls208xa: Update qspi node properties for LS2088ARDB 2020-01-09 15:32:29 +08:00
fsl-ls208xa.dtsi arm64: dts: layerscape: add ftm_alarm0 node 2020-07-11 23:38:49 +08:00
fsl-ls1012a-frdm.dts arm64: dts: ls1012a: Add QSPI node properties 2020-04-25 09:16:06 +08:00
fsl-ls1012a-frwy.dts arm64: dts: ls1012a: Add QSPI node properties 2020-04-25 09:16:06 +08:00
fsl-ls1012a-oxalis.dts arm64: dts: freescale: Enable PCI-E controller for Oxalis board 2019-03-20 20:58:26 +08:00
fsl-ls1012a-qds.dts arm64: dts: ls1012a: Add QSPI node properties 2020-04-25 09:16:06 +08:00
fsl-ls1012a-rdb.dts arm64: dts: ls1012a: Add QSPI node properties 2020-04-25 09:16:06 +08:00
fsl-ls1012a.dtsi arm64: dts: layerscape: add ftm_alarm0 node 2020-07-11 23:38:49 +08:00
fsl-ls1028a-kontron-kbox-a-230-ls.dts arm64: dts: ls1028a: disable the felix switch by default 2020-03-16 16:16:00 +08:00
fsl-ls1028a-kontron-sl28-var2.dts arm64: dts: ls1028a: sl28: keep switch port names consistent 2020-05-20 22:58:15 +08:00
fsl-ls1028a-kontron-sl28-var3-ads2.dts arm64: dts: ls1028a: sl28: fix on-board EEPROMS 2020-03-16 16:16:00 +08:00
fsl-ls1028a-kontron-sl28-var4.dts arm64: dts: ls1028: sl28: explicitly enable network ports 2020-03-11 15:58:13 +08:00
fsl-ls1028a-kontron-sl28.dts arm64: dts: freescale: sl28: enable LPUART1 2020-05-20 09:12:45 +08:00
fsl-ls1028a-qds.dts arm64: dts: ls1028a-qds: Add DSPI flash nodes 2020-07-13 18:46:38 +08:00
fsl-ls1028a-rdb.dts arm64: dts: ls1028a: disable the felix switch by default 2020-03-16 16:16:00 +08:00
fsl-ls1028a.dtsi arm64: dts: ls1028a: Add ftm_alarm0 DT node 2020-07-11 23:37:31 +08:00
fsl-ls1043-post.dtsi arm64: dts: ls1043a: FMan erratum A050385 2020-03-06 21:55:32 -08:00
fsl-ls1043a-qds.dts arm64: dts: ls1043a: update USB nodes status to match board config 2020-07-13 15:09:31 +08:00
fsl-ls1043a-rdb.dts arm64: dts: ls1043a: update USB nodes status to match board config 2020-07-13 15:09:31 +08:00
fsl-ls1043a.dtsi arm64: dts: ls1043a: update USB nodes status to match board config 2020-07-13 15:09:31 +08:00
fsl-ls1046-post.dtsi arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
fsl-ls1046a-frwy.dts arm64: dts: ls1046a: Add QSPI node for ls1046afrwy 2019-12-11 11:13:37 +08:00
fsl-ls1046a-qds.dts arm64: dts: fsl: use a generic node name for m25p80 flashes 2019-01-11 17:13:04 +08:00
fsl-ls1046a-rdb.dts arm64: dts: ls1046ardb: set RGMII interfaces to RGMII_ID mode 2020-03-16 14:58:33 -07:00
fsl-ls1046a.dtsi arm64: dts: ls1046a: add more thermal zone support 2020-07-13 10:17:01 +08:00
fsl-ls1088a-qds.dts arm64: dts: ls1088a: Add QSPI support for NXP LS1088 2019-12-11 11:13:44 +08:00
fsl-ls1088a-rdb.dts arm64: dts: ls1088a: support eMMC HS200 speed mode for RDB board 2020-02-14 11:39:40 +08:00
fsl-ls1088a.dtsi arm64: dts: layerscape: add ftm_alarm0 node 2020-07-11 23:38:49 +08:00
fsl-ls2080a-qds.dts arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
fsl-ls2080a-rdb.dts arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
fsl-ls2080a-simu.dts arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
fsl-ls2080a.dtsi arm64: dts: freescale: Add missing cooling device properties for CPUs 2018-07-03 15:01:09 +08:00
fsl-ls2088a-qds.dts arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
fsl-ls2088a-rdb.dts arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
fsl-ls2088a.dtsi arm64: dts: layerscape: removed compatible string "snps,dw-pcie" 2018-12-08 10:28:38 +08:00
fsl-lx2160a-cex7.dtsi arm64: dts: lx2160a-cex7: add on-module eeproms 2020-03-11 15:58:13 +08:00
fsl-lx2160a-clearfog-cx.dts arm64: dts: lx2160a: add dts for CEX7 platforms 2019-12-23 11:36:36 +08:00
fsl-lx2160a-clearfog-itx.dtsi arm64: dts: lx2160a: add dts for CEX7 platforms 2019-12-23 11:36:36 +08:00
fsl-lx2160a-honeycomb.dts arm64: dts: lx2160a: add dts for CEX7 platforms 2019-12-23 11:36:36 +08:00
fsl-lx2160a-qds.dts arm64: dts: lx2160a: add DT node for all DSPI controller 2020-07-11 22:13:35 +08:00
fsl-lx2160a-rdb.dts arm64: dts: lx2160a-rdb: fix shunt-resistor value 2020-07-20 10:31:11 +08:00
fsl-lx2160a.dtsi arm64: dts: lx2160a: Increase configuration space size 2020-07-13 16:55:34 +08:00
imx8mm-beacon-baseboard.dtsi arm64: dts: imx: Add Beacon i.MX8m-Mini development kit 2020-04-23 22:20:17 +08:00
imx8mm-beacon-kit.dts arm64: dts: imx: Add Beacon i.MX8m-Mini development kit 2020-04-23 22:20:17 +08:00
imx8mm-beacon-som.dtsi arm64: dts: imx8mm-beacon: Fix voltages on LDO1 and LDO2 2020-06-18 22:35:02 +08:00
imx8mm-evk.dts arm64: dts: imx8mm-evk: correct ldo1/ldo2 voltage range 2020-06-18 15:34:50 +08:00
imx8mm-pinfunc.h arm64: dts: imx8mm: Add missing mux options for UART1 and UART2 signals 2019-12-23 11:41:38 +08:00
imx8mm.dtsi arm64: dts: imx8m: add mu node 2020-06-23 14:50:39 +08:00
imx8mn-ddr4-evk.dts arm64: dts: imx8mn-ddr4-evk: correct ldo1/ldo2 voltage range 2020-06-18 15:34:55 +08:00
imx8mn-evk.dts arm64: dts: imx8mn-evk: add pca9450 for i.mx8mn-evk board 2020-07-13 12:09:30 +08:00
imx8mn-evk.dtsi arm64: dts: imx8mn-evk: add pca9450 for i.mx8mn-evk board 2020-07-13 12:09:30 +08:00
imx8mn-pinfunc.h dt-bindings: imx: Add pinctrl binding doc for i.MX8MN 2019-06-25 10:39:39 +02:00
imx8mn.dtsi arm64: dts: imx8m: add mu node 2020-06-23 14:50:39 +08:00
imx8mp-evk.dts arm64: dts: imx8mp-evk: Enable pca6416 on i2c3 bus 2020-03-11 16:07:17 +08:00
imx8mp-pinfunc.h arm64: dts: freescale: imx8mp: update input_val for AUDIOMIX_BIT_STREAM 2020-04-29 11:30:32 +08:00
imx8mp.dtsi arm64: dts: imx8mp: add ddr pmu device node 2020-07-13 10:19:19 +08:00
imx8mq-evk.dts arm64: dts: imx8mq-evk: add phy-reset-gpios for fec1 2020-02-24 09:37:19 +08:00
imx8mq-hummingboard-pulse.dts arm64: dts: imx8mq-hummingboard-pulse: add eeprom description 2020-01-09 17:14:46 +08:00
imx8mq-librem5-devkit.dts arm64: dts: imx8mq-librem5-devkit: Don't use underscore in node name 2020-04-23 09:17:35 +08:00
imx8mq-nitrogen.dts arm64: dts: imx8mq: Move usdhc clocks assignment to board DT 2019-10-28 21:48:03 +08:00
imx8mq-phanbell.dts arm64: dts: imx8mq-phanbell: Fix Ethernet PHY post-reset duration 2020-03-11 17:12:32 +08:00
imx8mq-pico-pi.dts arm64: dts: imx8mq: Move usdhc clocks assignment to board DT 2019-10-28 21:48:03 +08:00
imx8mq-pinfunc.h arm64: add basic DTS for i.MX8MQ 2018-12-16 17:28:01 +08:00
imx8mq-sr-som.dtsi arm64: dts: imx8mq-sr-som: add eeprom description 2020-01-09 17:14:32 +08:00
imx8mq-thor96.dts arm64: dts: freescale: Add devicetree support for Thor96 board 2020-01-09 14:40:55 +08:00
imx8mq-zii-ultra-rmb3.dts arm64: dts: zii-ultra: adjust board names 2019-12-09 15:27:18 +08:00
imx8mq-zii-ultra-zest.dts arm64: dts: zii-ultra: adjust board names 2019-12-09 15:27:18 +08:00
imx8mq-zii-ultra.dtsi arm64: dts: zii-ultra: update MDIO speed and preamble 2020-07-13 16:18:20 +08:00
imx8mq.dtsi arm64: dts: imx8mq: Fix TMU interrupt property 2020-08-31 14:03:48 +08:00
imx8qxp-ai_ml.dts arm64: dts: imx8qxp: Move usdhc clocks assignment to board DT 2019-10-28 21:48:03 +08:00
imx8qxp-colibri-eval-v3.dts arm64: dts: freescale: add initial support for colibri imx8x 2019-11-04 09:28:07 +08:00
imx8qxp-colibri-eval-v3.dtsi arm64: dts: freescale: add initial support for colibri imx8x 2019-11-04 09:28:07 +08:00
imx8qxp-colibri.dtsi arm64: dts: freescale: add initial support for colibri imx8x 2019-11-04 09:28:07 +08:00
imx8qxp-mek.dts arm64: dts: imx8qxp-mek: Do not use underscore in node name 2020-05-13 16:56:45 +08:00
imx8qxp.dtsi arm64: dts: imx8qxp: Add ethernet alias 2020-06-23 19:06:59 +08:00
Makefile arm64: dts: imx: Add missing imx8mm-beacon-kit.dtb to build 2020-08-23 10:12:16 +08:00
qoriq-bman-portals.dtsi arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
qoriq-fman3-0-1g-0.dtsi arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
qoriq-fman3-0-1g-1.dtsi arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
qoriq-fman3-0-1g-2.dtsi arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
qoriq-fman3-0-1g-3.dtsi arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
qoriq-fman3-0-1g-4.dtsi arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
qoriq-fman3-0-1g-5.dtsi arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
qoriq-fman3-0-10g-0.dtsi arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
qoriq-fman3-0-10g-1.dtsi arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
qoriq-fman3-0.dtsi arm64: dts: fsl: add fsl,extts-fifo property for fman ptp 2020-04-29 11:44:43 +08:00
qoriq-qman-portals.dtsi arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
s32v234-evb.dts arm64: dts: fsl: Add device tree for S32V234-EVB 2019-10-28 21:48:03 +08:00
s32v234.dtsi arm64: dts: freescale: s32v234: use generic name bus 2020-02-13 11:25:25 +08:00