korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-15 00:04:15 +08:00
Code Issues Packages Projects Releases Wiki Activity
1ec0a8aba5
linux/drivers/thermal/sprd_thermal.c
Rob Herring f6a756e8fb thermal: Explicitly include correct DT includes 
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.

Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-07-31 20:03:42 +02:00

559 lines
14 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0
// Copyright (C) 2020 Spreadtrum Communications Inc.
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/nvmem-consumer.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/thermal.h>
#define SPRD_THM_CTL 0x0
#define SPRD_THM_INT_EN 0x4
#define SPRD_THM_INT_STS 0x8
#define SPRD_THM_INT_RAW_STS 0xc
#define SPRD_THM_DET_PERIOD 0x10
#define SPRD_THM_INT_CLR 0x14
#define SPRD_THM_INT_CLR_ST 0x18
#define SPRD_THM_MON_PERIOD 0x4c
#define SPRD_THM_MON_CTL 0x50
#define SPRD_THM_INTERNAL_STS1 0x54
#define SPRD_THM_RAW_READ_MSK 0x3ff
#define SPRD_THM_OFFSET(id) ((id) * 0x4)
#define SPRD_THM_TEMP(id) (SPRD_THM_OFFSET(id) + 0x5c)
#define SPRD_THM_THRES(id) (SPRD_THM_OFFSET(id) + 0x2c)
#define SPRD_THM_SEN(id) BIT((id) + 2)
#define SPRD_THM_SEN_OVERHEAT_EN(id) BIT((id) + 8)
#define SPRD_THM_SEN_OVERHEAT_ALARM_EN(id) BIT((id) + 0)
/* bits definitions for register THM_CTL */
#define SPRD_THM_SET_RDY_ST BIT(13)
#define SPRD_THM_SET_RDY BIT(12)
#define SPRD_THM_MON_EN BIT(1)
#define SPRD_THM_EN BIT(0)
/* bits definitions for register THM_INT_CTL */
#define SPRD_THM_BIT_INT_EN BIT(26)
#define SPRD_THM_OVERHEAT_EN BIT(25)
#define SPRD_THM_OTP_TRIP_SHIFT 10
/* bits definitions for register SPRD_THM_INTERNAL_STS1 */
#define SPRD_THM_TEMPER_RDY BIT(0)
#define SPRD_THM_DET_PERIOD_DATA 0x800
#define SPRD_THM_DET_PERIOD_MASK GENMASK(19, 0)
#define SPRD_THM_MON_MODE 0x7
#define SPRD_THM_MON_MODE_MASK GENMASK(3, 0)
#define SPRD_THM_MON_PERIOD_DATA 0x10
#define SPRD_THM_MON_PERIOD_MASK GENMASK(15, 0)
#define SPRD_THM_THRES_MASK GENMASK(19, 0)
#define SPRD_THM_INT_CLR_MASK GENMASK(24, 0)
/* thermal sensor calibration parameters */
#define SPRD_THM_TEMP_LOW -40000
#define SPRD_THM_TEMP_HIGH 120000
#define SPRD_THM_OTP_TEMP 120000
#define SPRD_THM_HOT_TEMP 75000
#define SPRD_THM_RAW_DATA_LOW 0
#define SPRD_THM_RAW_DATA_HIGH 1000
#define SPRD_THM_SEN_NUM 8
#define SPRD_THM_DT_OFFSET 24
#define SPRD_THM_RATION_OFFSET 17
#define SPRD_THM_RATION_SIGN 16
#define SPRD_THM_RDYST_POLLING_TIME 10
#define SPRD_THM_RDYST_TIMEOUT 700
#define SPRD_THM_TEMP_READY_POLL_TIME 10000
#define SPRD_THM_TEMP_READY_TIMEOUT 600000
#define SPRD_THM_MAX_SENSOR 8
struct sprd_thermal_sensor {
struct thermal_zone_device *tzd;
struct sprd_thermal_data *data;
struct device *dev;
int cal_slope;
int cal_offset;
int id;
};
struct sprd_thermal_data {
const struct sprd_thm_variant_data *var_data;
struct sprd_thermal_sensor *sensor[SPRD_THM_MAX_SENSOR];
struct clk *clk;
void __iomem *base;
u32 ratio_off;
int ratio_sign;
int nr_sensors;
};
/*
* The conversion between ADC and temperature is based on linear relationship,
* and use idea_k to specify the slope and ideal_b to specify the offset.
*
* Since different Spreadtrum SoCs have different ideal_k and ideal_b,
* we should save ideal_k and ideal_b in the device data structure.
*/
struct sprd_thm_variant_data {
u32 ideal_k;
u32 ideal_b;
};
static const struct sprd_thm_variant_data ums512_data = {
.ideal_k = 262,
.ideal_b = 66400,
};
static inline void sprd_thm_update_bits(void __iomem *reg, u32 mask, u32 val)
{
u32 tmp, orig;
orig = readl(reg);
tmp = orig & ~mask;
tmp |= val & mask;
writel(tmp, reg);
}
static int sprd_thm_cal_read(struct device_node *np, const char *cell_id,
u32 *val)
{
struct nvmem_cell *cell;
void *buf;
size_t len;
cell = of_nvmem_cell_get(np, cell_id);
if (IS_ERR(cell))
return PTR_ERR(cell);
buf = nvmem_cell_read(cell, &len);
nvmem_cell_put(cell);
if (IS_ERR(buf))
return PTR_ERR(buf);
if (len > sizeof(u32)) {
kfree(buf);
return -EINVAL;
}
memcpy(val, buf, len);
kfree(buf);
return 0;
}
static int sprd_thm_sensor_calibration(struct device_node *np,
struct sprd_thermal_data *thm,
struct sprd_thermal_sensor *sen)
{
int ret;
/*
* According to thermal datasheet, the default calibration offset is 64,
* and the default ratio is 1000.
*/
int dt_offset = 64, ratio = 1000;
ret = sprd_thm_cal_read(np, "sen_delta_cal", &dt_offset);
if (ret)
return ret;
ratio += thm->ratio_sign * thm->ratio_off;
/*
* According to the ideal slope K and ideal offset B, combined with
* calibration value of thermal from efuse, then calibrate the real
* slope k and offset b:
* k_cal = (k * ratio) / 1000.
* b_cal = b + (dt_offset - 64) * 500.
*/
sen->cal_slope = (thm->var_data->ideal_k * ratio) / 1000;
sen->cal_offset = thm->var_data->ideal_b + (dt_offset - 128) * 250;
return 0;
}
static int sprd_thm_rawdata_to_temp(struct sprd_thermal_sensor *sen,
u32 rawdata)
{
clamp(rawdata, (u32)SPRD_THM_RAW_DATA_LOW, (u32)SPRD_THM_RAW_DATA_HIGH);
/*
* According to the thermal datasheet, the formula of converting
* adc value to the temperature value should be:
* T_final = k_cal * x - b_cal.
*/
return sen->cal_slope * rawdata - sen->cal_offset;
}
static int sprd_thm_temp_to_rawdata(int temp, struct sprd_thermal_sensor *sen)
{
u32 val;
clamp(temp, (int)SPRD_THM_TEMP_LOW, (int)SPRD_THM_TEMP_HIGH);
/*
* According to the thermal datasheet, the formula of converting
* adc value to the temperature value should be:
* T_final = k_cal * x - b_cal.
*/
val = (temp + sen->cal_offset) / sen->cal_slope;
return clamp(val, val, (u32)(SPRD_THM_RAW_DATA_HIGH - 1));
}
static int sprd_thm_read_temp(struct thermal_zone_device *tz, int *temp)
{
struct sprd_thermal_sensor *sen = thermal_zone_device_priv(tz);
u32 data;
data = readl(sen->data->base + SPRD_THM_TEMP(sen->id)) &
SPRD_THM_RAW_READ_MSK;
*temp = sprd_thm_rawdata_to_temp(sen, data);
return 0;
}
static const struct thermal_zone_device_ops sprd_thm_ops = {
.get_temp = sprd_thm_read_temp,
};
static int sprd_thm_poll_ready_status(struct sprd_thermal_data *thm)
{
u32 val;
int ret;
/*
* Wait for thermal ready status before configuring thermal parameters.
*/
ret = readl_poll_timeout(thm->base + SPRD_THM_CTL, val,
!(val & SPRD_THM_SET_RDY_ST),
SPRD_THM_RDYST_POLLING_TIME,
SPRD_THM_RDYST_TIMEOUT);
if (ret)
return ret;
sprd_thm_update_bits(thm->base + SPRD_THM_CTL, SPRD_THM_MON_EN,
SPRD_THM_MON_EN);
sprd_thm_update_bits(thm->base + SPRD_THM_CTL, SPRD_THM_SET_RDY,
SPRD_THM_SET_RDY);
return 0;
}
static int sprd_thm_wait_temp_ready(struct sprd_thermal_data *thm)
{
u32 val;
/* Wait for first temperature data ready before reading temperature */
return readl_poll_timeout(thm->base + SPRD_THM_INTERNAL_STS1, val,
!(val & SPRD_THM_TEMPER_RDY),
SPRD_THM_TEMP_READY_POLL_TIME,
SPRD_THM_TEMP_READY_TIMEOUT);
}
static int sprd_thm_set_ready(struct sprd_thermal_data *thm)
{
int ret;
ret = sprd_thm_poll_ready_status(thm);
if (ret)
return ret;
/*
* Clear interrupt status, enable thermal interrupt and enable thermal.
*
* The SPRD thermal controller integrates a hardware interrupt signal,
* which means if the temperature is overheat, it will generate an
* interrupt and notify the event to PMIC automatically to shutdown the
* system. So here we should enable the interrupt bits, though we have
* not registered an irq handler.
*/
writel(SPRD_THM_INT_CLR_MASK, thm->base + SPRD_THM_INT_CLR);
sprd_thm_update_bits(thm->base + SPRD_THM_INT_EN,
SPRD_THM_BIT_INT_EN, SPRD_THM_BIT_INT_EN);
sprd_thm_update_bits(thm->base + SPRD_THM_CTL,
SPRD_THM_EN, SPRD_THM_EN);
return 0;
}
static void sprd_thm_sensor_init(struct sprd_thermal_data *thm,
struct sprd_thermal_sensor *sen)
{
u32 otp_rawdata, hot_rawdata;
otp_rawdata = sprd_thm_temp_to_rawdata(SPRD_THM_OTP_TEMP, sen);
hot_rawdata = sprd_thm_temp_to_rawdata(SPRD_THM_HOT_TEMP, sen);
/* Enable the sensor' overheat temperature protection interrupt */
sprd_thm_update_bits(thm->base + SPRD_THM_INT_EN,
SPRD_THM_SEN_OVERHEAT_ALARM_EN(sen->id),
SPRD_THM_SEN_OVERHEAT_ALARM_EN(sen->id));
/* Set the sensor' overheat and hot threshold temperature */
sprd_thm_update_bits(thm->base + SPRD_THM_THRES(sen->id),
SPRD_THM_THRES_MASK,
(otp_rawdata << SPRD_THM_OTP_TRIP_SHIFT) |
hot_rawdata);
/* Enable the corresponding sensor */
sprd_thm_update_bits(thm->base + SPRD_THM_CTL, SPRD_THM_SEN(sen->id),
SPRD_THM_SEN(sen->id));
}
static void sprd_thm_para_config(struct sprd_thermal_data *thm)
{
/* Set the period of two valid temperature detection action */
sprd_thm_update_bits(thm->base + SPRD_THM_DET_PERIOD,
SPRD_THM_DET_PERIOD_MASK, SPRD_THM_DET_PERIOD);
/* Set the sensors' monitor mode */
sprd_thm_update_bits(thm->base + SPRD_THM_MON_CTL,
SPRD_THM_MON_MODE_MASK, SPRD_THM_MON_MODE);
/* Set the sensors' monitor period */
sprd_thm_update_bits(thm->base + SPRD_THM_MON_PERIOD,
SPRD_THM_MON_PERIOD_MASK, SPRD_THM_MON_PERIOD);
}
static void sprd_thm_toggle_sensor(struct sprd_thermal_sensor *sen, bool on)
{
struct thermal_zone_device *tzd = sen->tzd;
if (on)
thermal_zone_device_enable(tzd);
else
thermal_zone_device_disable(tzd);
}
static int sprd_thm_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct device_node *sen_child;
struct sprd_thermal_data *thm;
struct sprd_thermal_sensor *sen;
const struct sprd_thm_variant_data *pdata;
int ret, i;
u32 val;
pdata = of_device_get_match_data(&pdev->dev);
if (!pdata) {
dev_err(&pdev->dev, "No matching driver data found\n");
return -EINVAL;
}
thm = devm_kzalloc(&pdev->dev, sizeof(*thm), GFP_KERNEL);
if (!thm)
return -ENOMEM;
thm->var_data = pdata;
thm->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(thm->base))
return PTR_ERR(thm->base);
thm->nr_sensors = of_get_child_count(np);
if (thm->nr_sensors == 0 || thm->nr_sensors > SPRD_THM_MAX_SENSOR) {
dev_err(&pdev->dev, "incorrect sensor count\n");
return -EINVAL;
}
thm->clk = devm_clk_get(&pdev->dev, "enable");
if (IS_ERR(thm->clk)) {
dev_err(&pdev->dev, "failed to get enable clock\n");
return PTR_ERR(thm->clk);
}
ret = clk_prepare_enable(thm->clk);
if (ret)
return ret;
sprd_thm_para_config(thm);
ret = sprd_thm_cal_read(np, "thm_sign_cal", &val);
if (ret)
goto disable_clk;
if (val > 0)
thm->ratio_sign = -1;
else
thm->ratio_sign = 1;
ret = sprd_thm_cal_read(np, "thm_ratio_cal", &thm->ratio_off);
if (ret)
goto disable_clk;
for_each_child_of_node(np, sen_child) {
sen = devm_kzalloc(&pdev->dev, sizeof(*sen), GFP_KERNEL);
if (!sen) {
ret = -ENOMEM;
goto of_put;
}
sen->data = thm;
sen->dev = &pdev->dev;
ret = of_property_read_u32(sen_child, "reg", &sen->id);
if (ret) {
dev_err(&pdev->dev, "get sensor reg failed");
goto of_put;
}
ret = sprd_thm_sensor_calibration(sen_child, thm, sen);
if (ret) {
dev_err(&pdev->dev, "efuse cal analysis failed");
goto of_put;
}
sprd_thm_sensor_init(thm, sen);
sen->tzd = devm_thermal_of_zone_register(sen->dev,
sen->id,
sen,
&sprd_thm_ops);
if (IS_ERR(sen->tzd)) {
dev_err(&pdev->dev, "register thermal zone failed %d\n",
sen->id);
ret = PTR_ERR(sen->tzd);
goto of_put;
}
thm->sensor[sen->id] = sen;
}
/* sen_child set to NULL at this point */
ret = sprd_thm_set_ready(thm);
if (ret)
goto of_put;
ret = sprd_thm_wait_temp_ready(thm);
if (ret)
goto of_put;
for (i = 0; i < thm->nr_sensors; i++)
sprd_thm_toggle_sensor(thm->sensor[i], true);
platform_set_drvdata(pdev, thm);
return 0;
of_put:
of_node_put(sen_child);
disable_clk:
clk_disable_unprepare(thm->clk);
return ret;
}
#ifdef CONFIG_PM_SLEEP
static void sprd_thm_hw_suspend(struct sprd_thermal_data *thm)
{
int i;
for (i = 0; i < thm->nr_sensors; i++) {
sprd_thm_update_bits(thm->base + SPRD_THM_CTL,
SPRD_THM_SEN(thm->sensor[i]->id), 0);
}
sprd_thm_update_bits(thm->base + SPRD_THM_CTL,
SPRD_THM_EN, 0x0);
}
static int sprd_thm_suspend(struct device *dev)
{
struct sprd_thermal_data *thm = dev_get_drvdata(dev);
int i;
for (i = 0; i < thm->nr_sensors; i++)
sprd_thm_toggle_sensor(thm->sensor[i], false);
sprd_thm_hw_suspend(thm);
clk_disable_unprepare(thm->clk);
return 0;
}
static int sprd_thm_hw_resume(struct sprd_thermal_data *thm)
{
int ret, i;
for (i = 0; i < thm->nr_sensors; i++) {
sprd_thm_update_bits(thm->base + SPRD_THM_CTL,
SPRD_THM_SEN(thm->sensor[i]->id),
SPRD_THM_SEN(thm->sensor[i]->id));
}
ret = sprd_thm_poll_ready_status(thm);
if (ret)
return ret;
writel(SPRD_THM_INT_CLR_MASK, thm->base + SPRD_THM_INT_CLR);
sprd_thm_update_bits(thm->base + SPRD_THM_CTL,
SPRD_THM_EN, SPRD_THM_EN);
return sprd_thm_wait_temp_ready(thm);
}
static int sprd_thm_resume(struct device *dev)
{
struct sprd_thermal_data *thm = dev_get_drvdata(dev);
int ret, i;
ret = clk_prepare_enable(thm->clk);
if (ret)
return ret;
ret = sprd_thm_hw_resume(thm);
if (ret)
goto disable_clk;
for (i = 0; i < thm->nr_sensors; i++)
sprd_thm_toggle_sensor(thm->sensor[i], true);
return 0;
disable_clk:
clk_disable_unprepare(thm->clk);
return ret;
}
#endif
static int sprd_thm_remove(struct platform_device *pdev)
{
struct sprd_thermal_data *thm = platform_get_drvdata(pdev);
int i;
for (i = 0; i < thm->nr_sensors; i++) {
sprd_thm_toggle_sensor(thm->sensor[i], false);
devm_thermal_of_zone_unregister(&pdev->dev,
thm->sensor[i]->tzd);
}
clk_disable_unprepare(thm->clk);
return 0;
}
static const struct of_device_id sprd_thermal_of_match[] = {
{ .compatible = "sprd,ums512-thermal", .data = &ums512_data },
{ },
};
MODULE_DEVICE_TABLE(of, sprd_thermal_of_match);
static const struct dev_pm_ops sprd_thermal_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(sprd_thm_suspend, sprd_thm_resume)
};
static struct platform_driver sprd_thermal_driver = {
.probe = sprd_thm_probe,
.remove = sprd_thm_remove,
.driver = {
.name = "sprd-thermal",
.pm = &sprd_thermal_pm_ops,
.of_match_table = sprd_thermal_of_match,
},
};
module_platform_driver(sprd_thermal_driver);
MODULE_AUTHOR("Freeman Liu <freeman.liu@unisoc.com>");
MODULE_DESCRIPTION("Spreadtrum thermal driver");
MODULE_LICENSE("GPL v2");
Reference in New Issue View Git Blame Copy Permalink