mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-30 23:54:04 +08:00
54bb501c06
tcm825x_remove is not necessarily called on module exit, it can also be called when the i2c_adapter is removed. While the i2c adapter might never be removed on an embedded system, in practice this sensor driver can also be used in e.g. a USB webcam where this is a perfectly acceptable thing to do. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
943 lines
22 KiB
C
943 lines
22 KiB
C
/*
|
|
* drivers/media/video/tcm825x.c
|
|
*
|
|
* TCM825X camera sensor driver.
|
|
*
|
|
* Copyright (C) 2007 Nokia Corporation.
|
|
*
|
|
* Contact: Sakari Ailus <sakari.ailus@nokia.com>
|
|
*
|
|
* Based on code from David Cohen <david.cohen@indt.org.br>
|
|
*
|
|
* This driver was based on ov9640 sensor driver from MontaVista
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
|
|
* 02110-1301 USA
|
|
*/
|
|
|
|
#include <linux/i2c.h>
|
|
#include <media/v4l2-int-device.h>
|
|
|
|
#include "tcm825x.h"
|
|
|
|
/*
|
|
* The sensor has two fps modes: the lower one just gives half the fps
|
|
* at the same xclk than the high one.
|
|
*/
|
|
#define MAX_FPS 30
|
|
#define MIN_FPS 8
|
|
#define MAX_HALF_FPS (MAX_FPS / 2)
|
|
#define HIGH_FPS_MODE_LOWER_LIMIT 14
|
|
#define DEFAULT_FPS MAX_HALF_FPS
|
|
|
|
struct tcm825x_sensor {
|
|
const struct tcm825x_platform_data *platform_data;
|
|
struct v4l2_int_device *v4l2_int_device;
|
|
struct i2c_client *i2c_client;
|
|
struct v4l2_pix_format pix;
|
|
struct v4l2_fract timeperframe;
|
|
};
|
|
|
|
/* list of image formats supported by TCM825X sensor */
|
|
static const struct v4l2_fmtdesc tcm825x_formats[] = {
|
|
{
|
|
.description = "YUYV (YUV 4:2:2), packed",
|
|
.pixelformat = V4L2_PIX_FMT_UYVY,
|
|
}, {
|
|
/* Note: V4L2 defines RGB565 as:
|
|
*
|
|
* Byte 0 Byte 1
|
|
* g2 g1 g0 r4 r3 r2 r1 r0 b4 b3 b2 b1 b0 g5 g4 g3
|
|
*
|
|
* We interpret RGB565 as:
|
|
*
|
|
* Byte 0 Byte 1
|
|
* g2 g1 g0 b4 b3 b2 b1 b0 r4 r3 r2 r1 r0 g5 g4 g3
|
|
*/
|
|
.description = "RGB565, le",
|
|
.pixelformat = V4L2_PIX_FMT_RGB565,
|
|
},
|
|
};
|
|
|
|
#define TCM825X_NUM_CAPTURE_FORMATS ARRAY_SIZE(tcm825x_formats)
|
|
|
|
/*
|
|
* TCM825X register configuration for all combinations of pixel format and
|
|
* image size
|
|
*/
|
|
static const struct tcm825x_reg subqcif = { 0x20, TCM825X_PICSIZ };
|
|
static const struct tcm825x_reg qcif = { 0x18, TCM825X_PICSIZ };
|
|
static const struct tcm825x_reg cif = { 0x14, TCM825X_PICSIZ };
|
|
static const struct tcm825x_reg qqvga = { 0x0c, TCM825X_PICSIZ };
|
|
static const struct tcm825x_reg qvga = { 0x04, TCM825X_PICSIZ };
|
|
static const struct tcm825x_reg vga = { 0x00, TCM825X_PICSIZ };
|
|
|
|
static const struct tcm825x_reg yuv422 = { 0x00, TCM825X_PICFMT };
|
|
static const struct tcm825x_reg rgb565 = { 0x02, TCM825X_PICFMT };
|
|
|
|
/* Our own specific controls */
|
|
#define V4L2_CID_ALC V4L2_CID_PRIVATE_BASE
|
|
#define V4L2_CID_H_EDGE_EN V4L2_CID_PRIVATE_BASE + 1
|
|
#define V4L2_CID_V_EDGE_EN V4L2_CID_PRIVATE_BASE + 2
|
|
#define V4L2_CID_LENS V4L2_CID_PRIVATE_BASE + 3
|
|
#define V4L2_CID_MAX_EXPOSURE_TIME V4L2_CID_PRIVATE_BASE + 4
|
|
#define V4L2_CID_LAST_PRIV V4L2_CID_MAX_EXPOSURE_TIME
|
|
|
|
/* Video controls */
|
|
static struct vcontrol {
|
|
struct v4l2_queryctrl qc;
|
|
u16 reg;
|
|
u16 start_bit;
|
|
} video_control[] = {
|
|
{
|
|
{
|
|
.id = V4L2_CID_GAIN,
|
|
.type = V4L2_CTRL_TYPE_INTEGER,
|
|
.name = "Gain",
|
|
.minimum = 0,
|
|
.maximum = 63,
|
|
.step = 1,
|
|
},
|
|
.reg = TCM825X_AG,
|
|
.start_bit = 0,
|
|
},
|
|
{
|
|
{
|
|
.id = V4L2_CID_RED_BALANCE,
|
|
.type = V4L2_CTRL_TYPE_INTEGER,
|
|
.name = "Red Balance",
|
|
.minimum = 0,
|
|
.maximum = 255,
|
|
.step = 1,
|
|
},
|
|
.reg = TCM825X_MRG,
|
|
.start_bit = 0,
|
|
},
|
|
{
|
|
{
|
|
.id = V4L2_CID_BLUE_BALANCE,
|
|
.type = V4L2_CTRL_TYPE_INTEGER,
|
|
.name = "Blue Balance",
|
|
.minimum = 0,
|
|
.maximum = 255,
|
|
.step = 1,
|
|
},
|
|
.reg = TCM825X_MBG,
|
|
.start_bit = 0,
|
|
},
|
|
{
|
|
{
|
|
.id = V4L2_CID_AUTO_WHITE_BALANCE,
|
|
.type = V4L2_CTRL_TYPE_BOOLEAN,
|
|
.name = "Auto White Balance",
|
|
.minimum = 0,
|
|
.maximum = 1,
|
|
.step = 0,
|
|
},
|
|
.reg = TCM825X_AWBSW,
|
|
.start_bit = 7,
|
|
},
|
|
{
|
|
{
|
|
.id = V4L2_CID_EXPOSURE,
|
|
.type = V4L2_CTRL_TYPE_INTEGER,
|
|
.name = "Exposure Time",
|
|
.minimum = 0,
|
|
.maximum = 0x1fff,
|
|
.step = 1,
|
|
},
|
|
.reg = TCM825X_ESRSPD_U,
|
|
.start_bit = 0,
|
|
},
|
|
{
|
|
{
|
|
.id = V4L2_CID_HFLIP,
|
|
.type = V4L2_CTRL_TYPE_BOOLEAN,
|
|
.name = "Mirror Image",
|
|
.minimum = 0,
|
|
.maximum = 1,
|
|
.step = 0,
|
|
},
|
|
.reg = TCM825X_H_INV,
|
|
.start_bit = 6,
|
|
},
|
|
{
|
|
{
|
|
.id = V4L2_CID_VFLIP,
|
|
.type = V4L2_CTRL_TYPE_BOOLEAN,
|
|
.name = "Vertical Flip",
|
|
.minimum = 0,
|
|
.maximum = 1,
|
|
.step = 0,
|
|
},
|
|
.reg = TCM825X_V_INV,
|
|
.start_bit = 7,
|
|
},
|
|
/* Private controls */
|
|
{
|
|
{
|
|
.id = V4L2_CID_ALC,
|
|
.type = V4L2_CTRL_TYPE_BOOLEAN,
|
|
.name = "Auto Luminance Control",
|
|
.minimum = 0,
|
|
.maximum = 1,
|
|
.step = 0,
|
|
},
|
|
.reg = TCM825X_ALCSW,
|
|
.start_bit = 7,
|
|
},
|
|
{
|
|
{
|
|
.id = V4L2_CID_H_EDGE_EN,
|
|
.type = V4L2_CTRL_TYPE_INTEGER,
|
|
.name = "Horizontal Edge Enhancement",
|
|
.minimum = 0,
|
|
.maximum = 0xff,
|
|
.step = 1,
|
|
},
|
|
.reg = TCM825X_HDTG,
|
|
.start_bit = 0,
|
|
},
|
|
{
|
|
{
|
|
.id = V4L2_CID_V_EDGE_EN,
|
|
.type = V4L2_CTRL_TYPE_INTEGER,
|
|
.name = "Vertical Edge Enhancement",
|
|
.minimum = 0,
|
|
.maximum = 0xff,
|
|
.step = 1,
|
|
},
|
|
.reg = TCM825X_VDTG,
|
|
.start_bit = 0,
|
|
},
|
|
{
|
|
{
|
|
.id = V4L2_CID_LENS,
|
|
.type = V4L2_CTRL_TYPE_INTEGER,
|
|
.name = "Lens Shading Compensation",
|
|
.minimum = 0,
|
|
.maximum = 0x3f,
|
|
.step = 1,
|
|
},
|
|
.reg = TCM825X_LENS,
|
|
.start_bit = 0,
|
|
},
|
|
{
|
|
{
|
|
.id = V4L2_CID_MAX_EXPOSURE_TIME,
|
|
.type = V4L2_CTRL_TYPE_INTEGER,
|
|
.name = "Maximum Exposure Time",
|
|
.minimum = 0,
|
|
.maximum = 0x3,
|
|
.step = 1,
|
|
},
|
|
.reg = TCM825X_ESRLIM,
|
|
.start_bit = 5,
|
|
},
|
|
};
|
|
|
|
|
|
static const struct tcm825x_reg *tcm825x_siz_reg[NUM_IMAGE_SIZES] =
|
|
{ &subqcif, &qqvga, &qcif, &qvga, &cif, &vga };
|
|
|
|
static const struct tcm825x_reg *tcm825x_fmt_reg[NUM_PIXEL_FORMATS] =
|
|
{ &yuv422, &rgb565 };
|
|
|
|
/*
|
|
* Read a value from a register in an TCM825X sensor device. The value is
|
|
* returned in 'val'.
|
|
* Returns zero if successful, or non-zero otherwise.
|
|
*/
|
|
static int tcm825x_read_reg(struct i2c_client *client, int reg)
|
|
{
|
|
int err;
|
|
struct i2c_msg msg[2];
|
|
u8 reg_buf, data_buf = 0;
|
|
|
|
if (!client->adapter)
|
|
return -ENODEV;
|
|
|
|
msg[0].addr = client->addr;
|
|
msg[0].flags = 0;
|
|
msg[0].len = 1;
|
|
msg[0].buf = ®_buf;
|
|
msg[1].addr = client->addr;
|
|
msg[1].flags = I2C_M_RD;
|
|
msg[1].len = 1;
|
|
msg[1].buf = &data_buf;
|
|
|
|
reg_buf = reg;
|
|
|
|
err = i2c_transfer(client->adapter, msg, 2);
|
|
if (err < 0)
|
|
return err;
|
|
return data_buf;
|
|
}
|
|
|
|
/*
|
|
* Write a value to a register in an TCM825X sensor device.
|
|
* Returns zero if successful, or non-zero otherwise.
|
|
*/
|
|
static int tcm825x_write_reg(struct i2c_client *client, u8 reg, u8 val)
|
|
{
|
|
int err;
|
|
struct i2c_msg msg[1];
|
|
unsigned char data[2];
|
|
|
|
if (!client->adapter)
|
|
return -ENODEV;
|
|
|
|
msg->addr = client->addr;
|
|
msg->flags = 0;
|
|
msg->len = 2;
|
|
msg->buf = data;
|
|
data[0] = reg;
|
|
data[1] = val;
|
|
err = i2c_transfer(client->adapter, msg, 1);
|
|
if (err >= 0)
|
|
return 0;
|
|
return err;
|
|
}
|
|
|
|
static int __tcm825x_write_reg_mask(struct i2c_client *client,
|
|
u8 reg, u8 val, u8 mask)
|
|
{
|
|
int rc;
|
|
|
|
/* need to do read - modify - write */
|
|
rc = tcm825x_read_reg(client, reg);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
rc &= (~mask); /* Clear the masked bits */
|
|
val &= mask; /* Enforce mask on value */
|
|
val |= rc;
|
|
|
|
/* write the new value to the register */
|
|
rc = tcm825x_write_reg(client, reg, val);
|
|
if (rc)
|
|
return rc;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define tcm825x_write_reg_mask(client, regmask, val) \
|
|
__tcm825x_write_reg_mask(client, TCM825X_ADDR((regmask)), val, \
|
|
TCM825X_MASK((regmask)))
|
|
|
|
|
|
/*
|
|
* Initialize a list of TCM825X registers.
|
|
* The list of registers is terminated by the pair of values
|
|
* { TCM825X_REG_TERM, TCM825X_VAL_TERM }.
|
|
* Returns zero if successful, or non-zero otherwise.
|
|
*/
|
|
static int tcm825x_write_default_regs(struct i2c_client *client,
|
|
const struct tcm825x_reg *reglist)
|
|
{
|
|
int err;
|
|
const struct tcm825x_reg *next = reglist;
|
|
|
|
while (!((next->reg == TCM825X_REG_TERM)
|
|
&& (next->val == TCM825X_VAL_TERM))) {
|
|
err = tcm825x_write_reg(client, next->reg, next->val);
|
|
if (err) {
|
|
dev_err(&client->dev, "register writing failed\n");
|
|
return err;
|
|
}
|
|
next++;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct vcontrol *find_vctrl(int id)
|
|
{
|
|
int i;
|
|
|
|
if (id < V4L2_CID_BASE)
|
|
return NULL;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(video_control); i++)
|
|
if (video_control[i].qc.id == id)
|
|
return &video_control[i];
|
|
|
|
return NULL;
|
|
}
|
|
|
|
/*
|
|
* Find the best match for a requested image capture size. The best match
|
|
* is chosen as the nearest match that has the same number or fewer pixels
|
|
* as the requested size, or the smallest image size if the requested size
|
|
* has fewer pixels than the smallest image.
|
|
*/
|
|
static enum image_size tcm825x_find_size(struct v4l2_int_device *s,
|
|
unsigned int width,
|
|
unsigned int height)
|
|
{
|
|
enum image_size isize;
|
|
unsigned long pixels = width * height;
|
|
struct tcm825x_sensor *sensor = s->priv;
|
|
|
|
for (isize = subQCIF; isize < VGA; isize++) {
|
|
if (tcm825x_sizes[isize + 1].height
|
|
* tcm825x_sizes[isize + 1].width > pixels) {
|
|
dev_dbg(&sensor->i2c_client->dev, "size %d\n", isize);
|
|
|
|
return isize;
|
|
}
|
|
}
|
|
|
|
dev_dbg(&sensor->i2c_client->dev, "format default VGA\n");
|
|
|
|
return VGA;
|
|
}
|
|
|
|
/*
|
|
* Configure the TCM825X for current image size, pixel format, and
|
|
* frame period. fper is the frame period (in seconds) expressed as a
|
|
* fraction. Returns zero if successful, or non-zero otherwise. The
|
|
* actual frame period is returned in fper.
|
|
*/
|
|
static int tcm825x_configure(struct v4l2_int_device *s)
|
|
{
|
|
struct tcm825x_sensor *sensor = s->priv;
|
|
struct v4l2_pix_format *pix = &sensor->pix;
|
|
enum image_size isize = tcm825x_find_size(s, pix->width, pix->height);
|
|
struct v4l2_fract *fper = &sensor->timeperframe;
|
|
enum pixel_format pfmt;
|
|
int err;
|
|
u32 tgt_fps;
|
|
u8 val;
|
|
|
|
/* common register initialization */
|
|
err = tcm825x_write_default_regs(
|
|
sensor->i2c_client, sensor->platform_data->default_regs());
|
|
if (err)
|
|
return err;
|
|
|
|
/* configure image size */
|
|
val = tcm825x_siz_reg[isize]->val;
|
|
dev_dbg(&sensor->i2c_client->dev,
|
|
"configuring image size %d\n", isize);
|
|
err = tcm825x_write_reg_mask(sensor->i2c_client,
|
|
tcm825x_siz_reg[isize]->reg, val);
|
|
if (err)
|
|
return err;
|
|
|
|
/* configure pixel format */
|
|
switch (pix->pixelformat) {
|
|
default:
|
|
case V4L2_PIX_FMT_RGB565:
|
|
pfmt = RGB565;
|
|
break;
|
|
case V4L2_PIX_FMT_UYVY:
|
|
pfmt = YUV422;
|
|
break;
|
|
}
|
|
|
|
dev_dbg(&sensor->i2c_client->dev,
|
|
"configuring pixel format %d\n", pfmt);
|
|
val = tcm825x_fmt_reg[pfmt]->val;
|
|
|
|
err = tcm825x_write_reg_mask(sensor->i2c_client,
|
|
tcm825x_fmt_reg[pfmt]->reg, val);
|
|
if (err)
|
|
return err;
|
|
|
|
/*
|
|
* For frame rate < 15, the FPS reg (addr 0x02, bit 7) must be
|
|
* set. Frame rate will be halved from the normal.
|
|
*/
|
|
tgt_fps = fper->denominator / fper->numerator;
|
|
if (tgt_fps <= HIGH_FPS_MODE_LOWER_LIMIT) {
|
|
val = tcm825x_read_reg(sensor->i2c_client, 0x02);
|
|
val |= 0x80;
|
|
tcm825x_write_reg(sensor->i2c_client, 0x02, val);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ioctl_queryctrl(struct v4l2_int_device *s,
|
|
struct v4l2_queryctrl *qc)
|
|
{
|
|
struct vcontrol *control;
|
|
|
|
control = find_vctrl(qc->id);
|
|
|
|
if (control == NULL)
|
|
return -EINVAL;
|
|
|
|
*qc = control->qc;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ioctl_g_ctrl(struct v4l2_int_device *s,
|
|
struct v4l2_control *vc)
|
|
{
|
|
struct tcm825x_sensor *sensor = s->priv;
|
|
struct i2c_client *client = sensor->i2c_client;
|
|
int val, r;
|
|
struct vcontrol *lvc;
|
|
|
|
/* exposure time is special, spread accross 2 registers */
|
|
if (vc->id == V4L2_CID_EXPOSURE) {
|
|
int val_lower, val_upper;
|
|
|
|
val_upper = tcm825x_read_reg(client,
|
|
TCM825X_ADDR(TCM825X_ESRSPD_U));
|
|
if (val_upper < 0)
|
|
return val_upper;
|
|
val_lower = tcm825x_read_reg(client,
|
|
TCM825X_ADDR(TCM825X_ESRSPD_L));
|
|
if (val_lower < 0)
|
|
return val_lower;
|
|
|
|
vc->value = ((val_upper & 0x1f) << 8) | (val_lower);
|
|
return 0;
|
|
}
|
|
|
|
lvc = find_vctrl(vc->id);
|
|
if (lvc == NULL)
|
|
return -EINVAL;
|
|
|
|
r = tcm825x_read_reg(client, TCM825X_ADDR(lvc->reg));
|
|
if (r < 0)
|
|
return r;
|
|
val = r & TCM825X_MASK(lvc->reg);
|
|
val >>= lvc->start_bit;
|
|
|
|
if (val < 0)
|
|
return val;
|
|
|
|
if (vc->id == V4L2_CID_HFLIP || vc->id == V4L2_CID_VFLIP)
|
|
val ^= sensor->platform_data->is_upside_down();
|
|
|
|
vc->value = val;
|
|
return 0;
|
|
}
|
|
|
|
static int ioctl_s_ctrl(struct v4l2_int_device *s,
|
|
struct v4l2_control *vc)
|
|
{
|
|
struct tcm825x_sensor *sensor = s->priv;
|
|
struct i2c_client *client = sensor->i2c_client;
|
|
struct vcontrol *lvc;
|
|
int val = vc->value;
|
|
|
|
/* exposure time is special, spread accross 2 registers */
|
|
if (vc->id == V4L2_CID_EXPOSURE) {
|
|
int val_lower, val_upper;
|
|
val_lower = val & TCM825X_MASK(TCM825X_ESRSPD_L);
|
|
val_upper = (val >> 8) & TCM825X_MASK(TCM825X_ESRSPD_U);
|
|
|
|
if (tcm825x_write_reg_mask(client,
|
|
TCM825X_ESRSPD_U, val_upper))
|
|
return -EIO;
|
|
|
|
if (tcm825x_write_reg_mask(client,
|
|
TCM825X_ESRSPD_L, val_lower))
|
|
return -EIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
lvc = find_vctrl(vc->id);
|
|
if (lvc == NULL)
|
|
return -EINVAL;
|
|
|
|
if (vc->id == V4L2_CID_HFLIP || vc->id == V4L2_CID_VFLIP)
|
|
val ^= sensor->platform_data->is_upside_down();
|
|
|
|
val = val << lvc->start_bit;
|
|
if (tcm825x_write_reg_mask(client, lvc->reg, val))
|
|
return -EIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ioctl_enum_fmt_cap(struct v4l2_int_device *s,
|
|
struct v4l2_fmtdesc *fmt)
|
|
{
|
|
int index = fmt->index;
|
|
|
|
switch (fmt->type) {
|
|
case V4L2_BUF_TYPE_VIDEO_CAPTURE:
|
|
if (index >= TCM825X_NUM_CAPTURE_FORMATS)
|
|
return -EINVAL;
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
fmt->flags = tcm825x_formats[index].flags;
|
|
strlcpy(fmt->description, tcm825x_formats[index].description,
|
|
sizeof(fmt->description));
|
|
fmt->pixelformat = tcm825x_formats[index].pixelformat;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ioctl_try_fmt_cap(struct v4l2_int_device *s,
|
|
struct v4l2_format *f)
|
|
{
|
|
struct tcm825x_sensor *sensor = s->priv;
|
|
enum image_size isize;
|
|
int ifmt;
|
|
struct v4l2_pix_format *pix = &f->fmt.pix;
|
|
|
|
isize = tcm825x_find_size(s, pix->width, pix->height);
|
|
dev_dbg(&sensor->i2c_client->dev, "isize = %d num_capture = %lu\n",
|
|
isize, (unsigned long)TCM825X_NUM_CAPTURE_FORMATS);
|
|
|
|
pix->width = tcm825x_sizes[isize].width;
|
|
pix->height = tcm825x_sizes[isize].height;
|
|
|
|
for (ifmt = 0; ifmt < TCM825X_NUM_CAPTURE_FORMATS; ifmt++)
|
|
if (pix->pixelformat == tcm825x_formats[ifmt].pixelformat)
|
|
break;
|
|
|
|
if (ifmt == TCM825X_NUM_CAPTURE_FORMATS)
|
|
ifmt = 0; /* Default = YUV 4:2:2 */
|
|
|
|
pix->pixelformat = tcm825x_formats[ifmt].pixelformat;
|
|
pix->field = V4L2_FIELD_NONE;
|
|
pix->bytesperline = pix->width * TCM825X_BYTES_PER_PIXEL;
|
|
pix->sizeimage = pix->bytesperline * pix->height;
|
|
pix->priv = 0;
|
|
dev_dbg(&sensor->i2c_client->dev, "format = 0x%08x\n",
|
|
pix->pixelformat);
|
|
|
|
switch (pix->pixelformat) {
|
|
case V4L2_PIX_FMT_UYVY:
|
|
default:
|
|
pix->colorspace = V4L2_COLORSPACE_JPEG;
|
|
break;
|
|
case V4L2_PIX_FMT_RGB565:
|
|
pix->colorspace = V4L2_COLORSPACE_SRGB;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ioctl_s_fmt_cap(struct v4l2_int_device *s,
|
|
struct v4l2_format *f)
|
|
{
|
|
struct tcm825x_sensor *sensor = s->priv;
|
|
struct v4l2_pix_format *pix = &f->fmt.pix;
|
|
int rval;
|
|
|
|
rval = ioctl_try_fmt_cap(s, f);
|
|
if (rval)
|
|
return rval;
|
|
|
|
rval = tcm825x_configure(s);
|
|
|
|
sensor->pix = *pix;
|
|
|
|
return rval;
|
|
}
|
|
|
|
static int ioctl_g_fmt_cap(struct v4l2_int_device *s,
|
|
struct v4l2_format *f)
|
|
{
|
|
struct tcm825x_sensor *sensor = s->priv;
|
|
|
|
f->fmt.pix = sensor->pix;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ioctl_g_parm(struct v4l2_int_device *s,
|
|
struct v4l2_streamparm *a)
|
|
{
|
|
struct tcm825x_sensor *sensor = s->priv;
|
|
struct v4l2_captureparm *cparm = &a->parm.capture;
|
|
|
|
if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
|
|
return -EINVAL;
|
|
|
|
memset(a, 0, sizeof(*a));
|
|
a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
|
|
|
|
cparm->capability = V4L2_CAP_TIMEPERFRAME;
|
|
cparm->timeperframe = sensor->timeperframe;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ioctl_s_parm(struct v4l2_int_device *s,
|
|
struct v4l2_streamparm *a)
|
|
{
|
|
struct tcm825x_sensor *sensor = s->priv;
|
|
struct v4l2_fract *timeperframe = &a->parm.capture.timeperframe;
|
|
u32 tgt_fps; /* target frames per secound */
|
|
int rval;
|
|
|
|
if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
|
|
return -EINVAL;
|
|
|
|
if ((timeperframe->numerator == 0)
|
|
|| (timeperframe->denominator == 0)) {
|
|
timeperframe->denominator = DEFAULT_FPS;
|
|
timeperframe->numerator = 1;
|
|
}
|
|
|
|
tgt_fps = timeperframe->denominator / timeperframe->numerator;
|
|
|
|
if (tgt_fps > MAX_FPS) {
|
|
timeperframe->denominator = MAX_FPS;
|
|
timeperframe->numerator = 1;
|
|
} else if (tgt_fps < MIN_FPS) {
|
|
timeperframe->denominator = MIN_FPS;
|
|
timeperframe->numerator = 1;
|
|
}
|
|
|
|
sensor->timeperframe = *timeperframe;
|
|
|
|
rval = tcm825x_configure(s);
|
|
|
|
return rval;
|
|
}
|
|
|
|
static int ioctl_s_power(struct v4l2_int_device *s, int on)
|
|
{
|
|
struct tcm825x_sensor *sensor = s->priv;
|
|
|
|
return sensor->platform_data->power_set(on);
|
|
}
|
|
|
|
/*
|
|
* Given the image capture format in pix, the nominal frame period in
|
|
* timeperframe, calculate the required xclk frequency.
|
|
*
|
|
* TCM825X input frequency characteristics are:
|
|
* Minimum 11.9 MHz, Typical 24.57 MHz and maximum 25/27 MHz
|
|
*/
|
|
|
|
static int ioctl_g_ifparm(struct v4l2_int_device *s, struct v4l2_ifparm *p)
|
|
{
|
|
struct tcm825x_sensor *sensor = s->priv;
|
|
struct v4l2_fract *timeperframe = &sensor->timeperframe;
|
|
u32 tgt_xclk; /* target xclk */
|
|
u32 tgt_fps; /* target frames per secound */
|
|
int rval;
|
|
|
|
rval = sensor->platform_data->ifparm(p);
|
|
if (rval)
|
|
return rval;
|
|
|
|
tgt_fps = timeperframe->denominator / timeperframe->numerator;
|
|
|
|
tgt_xclk = (tgt_fps <= HIGH_FPS_MODE_LOWER_LIMIT) ?
|
|
(2457 * tgt_fps) / MAX_HALF_FPS :
|
|
(2457 * tgt_fps) / MAX_FPS;
|
|
tgt_xclk *= 10000;
|
|
|
|
tgt_xclk = min(tgt_xclk, (u32)TCM825X_XCLK_MAX);
|
|
tgt_xclk = max(tgt_xclk, (u32)TCM825X_XCLK_MIN);
|
|
|
|
p->u.bt656.clock_curr = tgt_xclk;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ioctl_g_needs_reset(struct v4l2_int_device *s, void *buf)
|
|
{
|
|
struct tcm825x_sensor *sensor = s->priv;
|
|
|
|
return sensor->platform_data->needs_reset(s, buf, &sensor->pix);
|
|
}
|
|
|
|
static int ioctl_reset(struct v4l2_int_device *s)
|
|
{
|
|
return -EBUSY;
|
|
}
|
|
|
|
static int ioctl_init(struct v4l2_int_device *s)
|
|
{
|
|
return tcm825x_configure(s);
|
|
}
|
|
|
|
static int ioctl_dev_exit(struct v4l2_int_device *s)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int ioctl_dev_init(struct v4l2_int_device *s)
|
|
{
|
|
struct tcm825x_sensor *sensor = s->priv;
|
|
int r;
|
|
|
|
r = tcm825x_read_reg(sensor->i2c_client, 0x01);
|
|
if (r < 0)
|
|
return r;
|
|
if (r == 0) {
|
|
dev_err(&sensor->i2c_client->dev, "device not detected\n");
|
|
return -EIO;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static struct v4l2_int_ioctl_desc tcm825x_ioctl_desc[] = {
|
|
{ vidioc_int_dev_init_num,
|
|
(v4l2_int_ioctl_func *)ioctl_dev_init },
|
|
{ vidioc_int_dev_exit_num,
|
|
(v4l2_int_ioctl_func *)ioctl_dev_exit },
|
|
{ vidioc_int_s_power_num,
|
|
(v4l2_int_ioctl_func *)ioctl_s_power },
|
|
{ vidioc_int_g_ifparm_num,
|
|
(v4l2_int_ioctl_func *)ioctl_g_ifparm },
|
|
{ vidioc_int_g_needs_reset_num,
|
|
(v4l2_int_ioctl_func *)ioctl_g_needs_reset },
|
|
{ vidioc_int_reset_num,
|
|
(v4l2_int_ioctl_func *)ioctl_reset },
|
|
{ vidioc_int_init_num,
|
|
(v4l2_int_ioctl_func *)ioctl_init },
|
|
{ vidioc_int_enum_fmt_cap_num,
|
|
(v4l2_int_ioctl_func *)ioctl_enum_fmt_cap },
|
|
{ vidioc_int_try_fmt_cap_num,
|
|
(v4l2_int_ioctl_func *)ioctl_try_fmt_cap },
|
|
{ vidioc_int_g_fmt_cap_num,
|
|
(v4l2_int_ioctl_func *)ioctl_g_fmt_cap },
|
|
{ vidioc_int_s_fmt_cap_num,
|
|
(v4l2_int_ioctl_func *)ioctl_s_fmt_cap },
|
|
{ vidioc_int_g_parm_num,
|
|
(v4l2_int_ioctl_func *)ioctl_g_parm },
|
|
{ vidioc_int_s_parm_num,
|
|
(v4l2_int_ioctl_func *)ioctl_s_parm },
|
|
{ vidioc_int_queryctrl_num,
|
|
(v4l2_int_ioctl_func *)ioctl_queryctrl },
|
|
{ vidioc_int_g_ctrl_num,
|
|
(v4l2_int_ioctl_func *)ioctl_g_ctrl },
|
|
{ vidioc_int_s_ctrl_num,
|
|
(v4l2_int_ioctl_func *)ioctl_s_ctrl },
|
|
};
|
|
|
|
static struct v4l2_int_slave tcm825x_slave = {
|
|
.ioctls = tcm825x_ioctl_desc,
|
|
.num_ioctls = ARRAY_SIZE(tcm825x_ioctl_desc),
|
|
};
|
|
|
|
static struct tcm825x_sensor tcm825x;
|
|
|
|
static struct v4l2_int_device tcm825x_int_device = {
|
|
.module = THIS_MODULE,
|
|
.name = TCM825X_NAME,
|
|
.priv = &tcm825x,
|
|
.type = v4l2_int_type_slave,
|
|
.u = {
|
|
.slave = &tcm825x_slave,
|
|
},
|
|
};
|
|
|
|
static int tcm825x_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *did)
|
|
{
|
|
struct tcm825x_sensor *sensor = &tcm825x;
|
|
int rval;
|
|
|
|
if (i2c_get_clientdata(client))
|
|
return -EBUSY;
|
|
|
|
sensor->platform_data = client->dev.platform_data;
|
|
|
|
if (sensor->platform_data == NULL
|
|
|| !sensor->platform_data->is_okay())
|
|
return -ENODEV;
|
|
|
|
sensor->v4l2_int_device = &tcm825x_int_device;
|
|
|
|
sensor->i2c_client = client;
|
|
i2c_set_clientdata(client, sensor);
|
|
|
|
/* Make the default capture format QVGA RGB565 */
|
|
sensor->pix.width = tcm825x_sizes[QVGA].width;
|
|
sensor->pix.height = tcm825x_sizes[QVGA].height;
|
|
sensor->pix.pixelformat = V4L2_PIX_FMT_RGB565;
|
|
|
|
rval = v4l2_int_device_register(sensor->v4l2_int_device);
|
|
if (rval)
|
|
i2c_set_clientdata(client, NULL);
|
|
|
|
return rval;
|
|
}
|
|
|
|
static int tcm825x_remove(struct i2c_client *client)
|
|
{
|
|
struct tcm825x_sensor *sensor = i2c_get_clientdata(client);
|
|
|
|
if (!client->adapter)
|
|
return -ENODEV; /* our client isn't attached */
|
|
|
|
v4l2_int_device_unregister(sensor->v4l2_int_device);
|
|
i2c_set_clientdata(client, NULL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id tcm825x_id[] = {
|
|
{ "tcm825x", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, tcm825x_id);
|
|
|
|
static struct i2c_driver tcm825x_i2c_driver = {
|
|
.driver = {
|
|
.name = TCM825X_NAME,
|
|
},
|
|
.probe = tcm825x_probe,
|
|
.remove = tcm825x_remove,
|
|
.id_table = tcm825x_id,
|
|
};
|
|
|
|
static struct tcm825x_sensor tcm825x = {
|
|
.timeperframe = {
|
|
.numerator = 1,
|
|
.denominator = DEFAULT_FPS,
|
|
},
|
|
};
|
|
|
|
static int __init tcm825x_init(void)
|
|
{
|
|
int rval;
|
|
|
|
rval = i2c_add_driver(&tcm825x_i2c_driver);
|
|
if (rval)
|
|
printk(KERN_INFO "%s: failed registering " TCM825X_NAME "\n",
|
|
__func__);
|
|
|
|
return rval;
|
|
}
|
|
|
|
static void __exit tcm825x_exit(void)
|
|
{
|
|
i2c_del_driver(&tcm825x_i2c_driver);
|
|
}
|
|
|
|
/*
|
|
* FIXME: Menelaus isn't ready (?) at module_init stage, so use
|
|
* late_initcall for now.
|
|
*/
|
|
late_initcall(tcm825x_init);
|
|
module_exit(tcm825x_exit);
|
|
|
|
MODULE_AUTHOR("Sakari Ailus <sakari.ailus@nokia.com>");
|
|
MODULE_DESCRIPTION("TCM825x camera sensor driver");
|
|
MODULE_LICENSE("GPL");
|