mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-05 10:04:12 +08:00
a0386bba70
The value returned by an spi driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Claudius Heine <ch@denx.de> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC Acked-by: Marcus Folkesson <marcus.folkesson@gmail.com> Acked-by: Łukasz Stelmach <l.stelmach@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220123175201.34839-6-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
507 lines
12 KiB
C
507 lines
12 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Toppoly TD043MTEA1 Panel Driver
|
|
*
|
|
* Copyright (C) 2019 Texas Instruments Incorporated
|
|
*
|
|
* Based on the omapdrm-specific panel-tpo-td043mtea1 driver
|
|
*
|
|
* Author: Gražvydas Ignotas <notasas@gmail.com>
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/module.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/spi/spi.h>
|
|
|
|
#include <drm/drm_connector.h>
|
|
#include <drm/drm_modes.h>
|
|
#include <drm/drm_panel.h>
|
|
|
|
#define TPO_R02_MODE(x) ((x) & 7)
|
|
#define TPO_R02_MODE_800x480 7
|
|
#define TPO_R02_NCLK_RISING BIT(3)
|
|
#define TPO_R02_HSYNC_HIGH BIT(4)
|
|
#define TPO_R02_VSYNC_HIGH BIT(5)
|
|
|
|
#define TPO_R03_NSTANDBY BIT(0)
|
|
#define TPO_R03_EN_CP_CLK BIT(1)
|
|
#define TPO_R03_EN_VGL_PUMP BIT(2)
|
|
#define TPO_R03_EN_PWM BIT(3)
|
|
#define TPO_R03_DRIVING_CAP_100 BIT(4)
|
|
#define TPO_R03_EN_PRE_CHARGE BIT(6)
|
|
#define TPO_R03_SOFTWARE_CTL BIT(7)
|
|
|
|
#define TPO_R04_NFLIP_H BIT(0)
|
|
#define TPO_R04_NFLIP_V BIT(1)
|
|
#define TPO_R04_CP_CLK_FREQ_1H BIT(2)
|
|
#define TPO_R04_VGL_FREQ_1H BIT(4)
|
|
|
|
#define TPO_R03_VAL_NORMAL \
|
|
(TPO_R03_NSTANDBY | TPO_R03_EN_CP_CLK | TPO_R03_EN_VGL_PUMP | \
|
|
TPO_R03_EN_PWM | TPO_R03_DRIVING_CAP_100 | TPO_R03_EN_PRE_CHARGE | \
|
|
TPO_R03_SOFTWARE_CTL)
|
|
|
|
#define TPO_R03_VAL_STANDBY \
|
|
(TPO_R03_DRIVING_CAP_100 | TPO_R03_EN_PRE_CHARGE | \
|
|
TPO_R03_SOFTWARE_CTL)
|
|
|
|
static const u16 td043mtea1_def_gamma[12] = {
|
|
105, 315, 381, 431, 490, 537, 579, 686, 780, 837, 880, 1023
|
|
};
|
|
|
|
struct td043mtea1_panel {
|
|
struct drm_panel panel;
|
|
|
|
struct spi_device *spi;
|
|
struct regulator *vcc_reg;
|
|
struct gpio_desc *reset_gpio;
|
|
|
|
unsigned int mode;
|
|
u16 gamma[12];
|
|
bool vmirror;
|
|
bool powered_on;
|
|
bool spi_suspended;
|
|
bool power_on_resume;
|
|
};
|
|
|
|
#define to_td043mtea1_device(p) container_of(p, struct td043mtea1_panel, panel)
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* Hardware Access
|
|
*/
|
|
|
|
static int td043mtea1_write(struct td043mtea1_panel *lcd, u8 addr, u8 value)
|
|
{
|
|
struct spi_message msg;
|
|
struct spi_transfer xfer;
|
|
u16 data;
|
|
int ret;
|
|
|
|
spi_message_init(&msg);
|
|
|
|
memset(&xfer, 0, sizeof(xfer));
|
|
|
|
data = ((u16)addr << 10) | (1 << 8) | value;
|
|
xfer.tx_buf = &data;
|
|
xfer.bits_per_word = 16;
|
|
xfer.len = 2;
|
|
spi_message_add_tail(&xfer, &msg);
|
|
|
|
ret = spi_sync(lcd->spi, &msg);
|
|
if (ret < 0)
|
|
dev_warn(&lcd->spi->dev, "failed to write to LCD reg (%d)\n",
|
|
ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void td043mtea1_write_gamma(struct td043mtea1_panel *lcd)
|
|
{
|
|
const u16 *gamma = lcd->gamma;
|
|
unsigned int i;
|
|
u8 val;
|
|
|
|
/* gamma bits [9:8] */
|
|
for (val = i = 0; i < 4; i++)
|
|
val |= (gamma[i] & 0x300) >> ((i + 1) * 2);
|
|
td043mtea1_write(lcd, 0x11, val);
|
|
|
|
for (val = i = 0; i < 4; i++)
|
|
val |= (gamma[i + 4] & 0x300) >> ((i + 1) * 2);
|
|
td043mtea1_write(lcd, 0x12, val);
|
|
|
|
for (val = i = 0; i < 4; i++)
|
|
val |= (gamma[i + 8] & 0x300) >> ((i + 1) * 2);
|
|
td043mtea1_write(lcd, 0x13, val);
|
|
|
|
/* gamma bits [7:0] */
|
|
for (i = 0; i < 12; i++)
|
|
td043mtea1_write(lcd, 0x14 + i, gamma[i] & 0xff);
|
|
}
|
|
|
|
static int td043mtea1_write_mirror(struct td043mtea1_panel *lcd)
|
|
{
|
|
u8 reg4 = TPO_R04_NFLIP_H | TPO_R04_NFLIP_V |
|
|
TPO_R04_CP_CLK_FREQ_1H | TPO_R04_VGL_FREQ_1H;
|
|
if (lcd->vmirror)
|
|
reg4 &= ~TPO_R04_NFLIP_V;
|
|
|
|
return td043mtea1_write(lcd, 4, reg4);
|
|
}
|
|
|
|
static int td043mtea1_power_on(struct td043mtea1_panel *lcd)
|
|
{
|
|
int ret;
|
|
|
|
if (lcd->powered_on)
|
|
return 0;
|
|
|
|
ret = regulator_enable(lcd->vcc_reg);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Wait for the panel to stabilize. */
|
|
msleep(160);
|
|
|
|
gpiod_set_value(lcd->reset_gpio, 0);
|
|
|
|
td043mtea1_write(lcd, 2, TPO_R02_MODE(lcd->mode) | TPO_R02_NCLK_RISING);
|
|
td043mtea1_write(lcd, 3, TPO_R03_VAL_NORMAL);
|
|
td043mtea1_write(lcd, 0x20, 0xf0);
|
|
td043mtea1_write(lcd, 0x21, 0xf0);
|
|
td043mtea1_write_mirror(lcd);
|
|
td043mtea1_write_gamma(lcd);
|
|
|
|
lcd->powered_on = true;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void td043mtea1_power_off(struct td043mtea1_panel *lcd)
|
|
{
|
|
if (!lcd->powered_on)
|
|
return;
|
|
|
|
td043mtea1_write(lcd, 3, TPO_R03_VAL_STANDBY | TPO_R03_EN_PWM);
|
|
|
|
gpiod_set_value(lcd->reset_gpio, 1);
|
|
|
|
/* wait for at least 2 vsyncs before cutting off power */
|
|
msleep(50);
|
|
|
|
td043mtea1_write(lcd, 3, TPO_R03_VAL_STANDBY);
|
|
|
|
regulator_disable(lcd->vcc_reg);
|
|
|
|
lcd->powered_on = false;
|
|
}
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* sysfs
|
|
*/
|
|
|
|
static ssize_t vmirror_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct td043mtea1_panel *lcd = dev_get_drvdata(dev);
|
|
|
|
return sysfs_emit(buf, "%d\n", lcd->vmirror);
|
|
}
|
|
|
|
static ssize_t vmirror_store(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct td043mtea1_panel *lcd = dev_get_drvdata(dev);
|
|
int val;
|
|
int ret;
|
|
|
|
ret = kstrtoint(buf, 0, &val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
lcd->vmirror = !!val;
|
|
|
|
ret = td043mtea1_write_mirror(lcd);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t mode_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct td043mtea1_panel *lcd = dev_get_drvdata(dev);
|
|
|
|
return sysfs_emit(buf, "%d\n", lcd->mode);
|
|
}
|
|
|
|
static ssize_t mode_store(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct td043mtea1_panel *lcd = dev_get_drvdata(dev);
|
|
long val;
|
|
int ret;
|
|
|
|
ret = kstrtol(buf, 0, &val);
|
|
if (ret != 0 || val & ~7)
|
|
return -EINVAL;
|
|
|
|
lcd->mode = val;
|
|
|
|
val |= TPO_R02_NCLK_RISING;
|
|
td043mtea1_write(lcd, 2, val);
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t gamma_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct td043mtea1_panel *lcd = dev_get_drvdata(dev);
|
|
ssize_t len = 0;
|
|
unsigned int i;
|
|
int ret;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(lcd->gamma); i++) {
|
|
ret = snprintf(buf + len, PAGE_SIZE - len, "%u ",
|
|
lcd->gamma[i]);
|
|
if (ret < 0)
|
|
return ret;
|
|
len += ret;
|
|
}
|
|
buf[len - 1] = '\n';
|
|
|
|
return len;
|
|
}
|
|
|
|
static ssize_t gamma_store(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct td043mtea1_panel *lcd = dev_get_drvdata(dev);
|
|
unsigned int g[12];
|
|
unsigned int i;
|
|
int ret;
|
|
|
|
ret = sscanf(buf, "%u %u %u %u %u %u %u %u %u %u %u %u",
|
|
&g[0], &g[1], &g[2], &g[3], &g[4], &g[5],
|
|
&g[6], &g[7], &g[8], &g[9], &g[10], &g[11]);
|
|
if (ret != 12)
|
|
return -EINVAL;
|
|
|
|
for (i = 0; i < 12; i++)
|
|
lcd->gamma[i] = g[i];
|
|
|
|
td043mtea1_write_gamma(lcd);
|
|
|
|
return count;
|
|
}
|
|
|
|
static DEVICE_ATTR_RW(vmirror);
|
|
static DEVICE_ATTR_RW(mode);
|
|
static DEVICE_ATTR_RW(gamma);
|
|
|
|
static struct attribute *td043mtea1_attrs[] = {
|
|
&dev_attr_vmirror.attr,
|
|
&dev_attr_mode.attr,
|
|
&dev_attr_gamma.attr,
|
|
NULL,
|
|
};
|
|
|
|
static const struct attribute_group td043mtea1_attr_group = {
|
|
.attrs = td043mtea1_attrs,
|
|
};
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* Panel Operations
|
|
*/
|
|
|
|
static int td043mtea1_unprepare(struct drm_panel *panel)
|
|
{
|
|
struct td043mtea1_panel *lcd = to_td043mtea1_device(panel);
|
|
|
|
if (!lcd->spi_suspended)
|
|
td043mtea1_power_off(lcd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int td043mtea1_prepare(struct drm_panel *panel)
|
|
{
|
|
struct td043mtea1_panel *lcd = to_td043mtea1_device(panel);
|
|
int ret;
|
|
|
|
/*
|
|
* If we are resuming from system suspend, SPI might not be enabled
|
|
* yet, so we'll program the LCD from SPI PM resume callback.
|
|
*/
|
|
if (lcd->spi_suspended)
|
|
return 0;
|
|
|
|
ret = td043mtea1_power_on(lcd);
|
|
if (ret) {
|
|
dev_err(&lcd->spi->dev, "%s: power on failed (%d)\n",
|
|
__func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct drm_display_mode td043mtea1_mode = {
|
|
.clock = 36000,
|
|
.hdisplay = 800,
|
|
.hsync_start = 800 + 68,
|
|
.hsync_end = 800 + 68 + 1,
|
|
.htotal = 800 + 68 + 1 + 214,
|
|
.vdisplay = 480,
|
|
.vsync_start = 480 + 39,
|
|
.vsync_end = 480 + 39 + 1,
|
|
.vtotal = 480 + 39 + 1 + 34,
|
|
.type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
|
|
.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
|
|
.width_mm = 94,
|
|
.height_mm = 56,
|
|
};
|
|
|
|
static int td043mtea1_get_modes(struct drm_panel *panel,
|
|
struct drm_connector *connector)
|
|
{
|
|
struct drm_display_mode *mode;
|
|
|
|
mode = drm_mode_duplicate(connector->dev, &td043mtea1_mode);
|
|
if (!mode)
|
|
return -ENOMEM;
|
|
|
|
drm_mode_set_name(mode);
|
|
drm_mode_probed_add(connector, mode);
|
|
|
|
connector->display_info.width_mm = td043mtea1_mode.width_mm;
|
|
connector->display_info.height_mm = td043mtea1_mode.height_mm;
|
|
/*
|
|
* FIXME: According to the datasheet sync signals are sampled on the
|
|
* rising edge of the clock, but the code running on the OMAP3 Pandora
|
|
* indicates sampling on the falling edge. This should be tested on a
|
|
* real device.
|
|
*/
|
|
connector->display_info.bus_flags = DRM_BUS_FLAG_DE_HIGH
|
|
| DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE
|
|
| DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE;
|
|
|
|
return 1;
|
|
}
|
|
|
|
static const struct drm_panel_funcs td043mtea1_funcs = {
|
|
.unprepare = td043mtea1_unprepare,
|
|
.prepare = td043mtea1_prepare,
|
|
.get_modes = td043mtea1_get_modes,
|
|
};
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* Power Management, Probe and Remove
|
|
*/
|
|
|
|
static int __maybe_unused td043mtea1_suspend(struct device *dev)
|
|
{
|
|
struct td043mtea1_panel *lcd = dev_get_drvdata(dev);
|
|
|
|
if (lcd->powered_on) {
|
|
td043mtea1_power_off(lcd);
|
|
lcd->powered_on = true;
|
|
}
|
|
|
|
lcd->spi_suspended = true;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused td043mtea1_resume(struct device *dev)
|
|
{
|
|
struct td043mtea1_panel *lcd = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
lcd->spi_suspended = false;
|
|
|
|
if (lcd->powered_on) {
|
|
lcd->powered_on = false;
|
|
ret = td043mtea1_power_on(lcd);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(td043mtea1_pm_ops, td043mtea1_suspend,
|
|
td043mtea1_resume);
|
|
|
|
static int td043mtea1_probe(struct spi_device *spi)
|
|
{
|
|
struct td043mtea1_panel *lcd;
|
|
int ret;
|
|
|
|
lcd = devm_kzalloc(&spi->dev, sizeof(*lcd), GFP_KERNEL);
|
|
if (lcd == NULL)
|
|
return -ENOMEM;
|
|
|
|
spi_set_drvdata(spi, lcd);
|
|
lcd->spi = spi;
|
|
lcd->mode = TPO_R02_MODE_800x480;
|
|
memcpy(lcd->gamma, td043mtea1_def_gamma, sizeof(lcd->gamma));
|
|
|
|
lcd->vcc_reg = devm_regulator_get(&spi->dev, "vcc");
|
|
if (IS_ERR(lcd->vcc_reg))
|
|
return dev_err_probe(&spi->dev, PTR_ERR(lcd->vcc_reg),
|
|
"failed to get VCC regulator\n");
|
|
|
|
lcd->reset_gpio = devm_gpiod_get(&spi->dev, "reset", GPIOD_OUT_HIGH);
|
|
if (IS_ERR(lcd->reset_gpio))
|
|
return dev_err_probe(&spi->dev, PTR_ERR(lcd->reset_gpio),
|
|
"failed to get reset GPIO\n");
|
|
|
|
spi->bits_per_word = 16;
|
|
spi->mode = SPI_MODE_0;
|
|
|
|
ret = spi_setup(spi);
|
|
if (ret < 0) {
|
|
dev_err(&spi->dev, "failed to setup SPI: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = sysfs_create_group(&spi->dev.kobj, &td043mtea1_attr_group);
|
|
if (ret < 0) {
|
|
dev_err(&spi->dev, "failed to create sysfs files\n");
|
|
return ret;
|
|
}
|
|
|
|
drm_panel_init(&lcd->panel, &lcd->spi->dev, &td043mtea1_funcs,
|
|
DRM_MODE_CONNECTOR_DPI);
|
|
|
|
drm_panel_add(&lcd->panel);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void td043mtea1_remove(struct spi_device *spi)
|
|
{
|
|
struct td043mtea1_panel *lcd = spi_get_drvdata(spi);
|
|
|
|
drm_panel_remove(&lcd->panel);
|
|
drm_panel_disable(&lcd->panel);
|
|
drm_panel_unprepare(&lcd->panel);
|
|
|
|
sysfs_remove_group(&spi->dev.kobj, &td043mtea1_attr_group);
|
|
}
|
|
|
|
static const struct of_device_id td043mtea1_of_match[] = {
|
|
{ .compatible = "tpo,td043mtea1", },
|
|
{ /* sentinel */ },
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, td043mtea1_of_match);
|
|
|
|
static const struct spi_device_id td043mtea1_ids[] = {
|
|
{ "td043mtea1", 0 },
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(spi, td043mtea1_ids);
|
|
|
|
static struct spi_driver td043mtea1_driver = {
|
|
.probe = td043mtea1_probe,
|
|
.remove = td043mtea1_remove,
|
|
.id_table = td043mtea1_ids,
|
|
.driver = {
|
|
.name = "panel-tpo-td043mtea1",
|
|
.pm = &td043mtea1_pm_ops,
|
|
.of_match_table = td043mtea1_of_match,
|
|
},
|
|
};
|
|
|
|
module_spi_driver(td043mtea1_driver);
|
|
|
|
MODULE_AUTHOR("Gražvydas Ignotas <notasas@gmail.com>");
|
|
MODULE_DESCRIPTION("TPO TD043MTEA1 Panel Driver");
|
|
MODULE_LICENSE("GPL");
|