Anson Huang 1dca9bdec6 iio: magnetometer: mag3110: add vdd/vddio regulator operation support ... The magnetometer's power supplies could be controllable on some platforms, such as i.MX6Q-SABRESD board, the mag3110's power supplies are controlled by a GPIO fixed regulator, need to make sure the regulators are enabled before any communication with mag3110, this patch adds vdd/vddio regulator operation support. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>		2019-01-12 19:00:23 +00:00
..
accel	Second set of IIO new device support, features and cleanups for the 4.21 cycle.	2018-12-13 13:37:24 +01:00
adc	iio: adc: Add the TI ads124s08 ADC code	2019-01-12 18:42:39 +00:00
afe	iio: afe: rescale: new driver	2018-04-28 18:03:22 +01:00
amplifiers	drivers: iio: Update MODULE AUTHOR email address	2018-08-19 17:23:39 +01:00
buffer	iio:kfifo_buf: check for uint overflow	2018-03-30 11:16:12 +01:00
chemical	iio: chemical: sps30: add support for self cleaning	2019-01-05 16:10:39 +00:00
common	iio: hid-sensor-hub: clean up indentation, remove extraneous tab	2018-11-25 14:03:59 +00:00
counter	iio: 104-quad-8: Provide defines for magic numbers	2018-06-10 11:52:30 +01:00
dac	iio: dac: ad5686: Add support for AD5674R/AD5679R	2019-01-12 18:58:21 +00:00
dummy	iio:dummy: Add extra paragraphs on Kconfig	2018-03-03 15:20:16 +00:00
frequency	iio: ad9523: fix a missing check of return value	2019-01-05 16:10:50 +00:00
gyro	iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers	2018-11-16 11:42:12 +00:00
health	iio: health: max30102: Mark expected switch fall-throughs	2018-08-19 17:21:35 +01:00
humidity	iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers	2018-11-16 11:42:12 +00:00
imu	iio: imu: st_lsm6dsx: remove set but not used variable ''	2018-12-22 16:58:14 +00:00
light	Merge 4.20-rc5 into staging-next	2018-12-03 07:55:28 +01:00
magnetometer	iio: magnetometer: mag3110: add vdd/vddio regulator operation support	2019-01-12 19:00:23 +00:00
multiplexer	iio: multiplexer: switch to SPDX license identifier	2018-08-20 19:28:26 +01:00
orientation	iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers	2018-11-16 11:42:12 +00:00
potentiometer	iio: potentiometer: Add driver for Microchip MCP41xxx/42xxx	2018-11-25 12:35:26 +00:00
potentiostat	iio: potentiostat: lmp91000: add LMP91002 support	2018-05-12 11:02:44 +01:00
pressure	iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers	2018-11-16 11:42:12 +00:00
proximity	iio: proximity: Add driver support for ST's VL53L0X ToF ranging sensor.	2018-09-22 16:42:56 +01:00
resolver	staging:iio:ad2s90: Move out of staging	2018-12-01 15:40:39 +00:00
temperature	iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers	2018-11-16 11:42:12 +00:00
trigger	drivers: iio: Update MODULE AUTHOR email address	2018-08-19 17:23:39 +01:00
iio_core_trigger.h
iio_core.h	the rest of drivers/*: annotate ->poll() instances	2017-11-28 11:06:58 -05:00
industrialio-buffer.c	First round of IIO fixes for the 4.16 cycle.	2018-02-20 10:03:22 +01:00
industrialio-configfs.c	iio: make function argument and some structures const	2017-10-19 16:15:24 +02:00
industrialio-core.c	iio: add IIO_MASSCONCENTRATION channel type	2018-12-16 14:05:57 +00:00
industrialio-event.c	vfs: do bulk POLL* -> EPOLL* replacement	2018-02-11 14:34:03 -08:00
industrialio-sw-device.c	iio: make function argument and some structures const	2017-10-19 16:15:24 +02:00
industrialio-sw-trigger.c	iio: make function argument and some structures const	2017-10-19 16:15:24 +02:00
industrialio-trigger.c	iio:trigger: Remove necessity to have a trig->ops structure.	2017-08-22 21:20:28 +01:00
industrialio-triggered-event.c
inkern.c	treewide: kzalloc() -> kcalloc()	2018-06-12 16:19:22 -07:00
Kconfig	staging: iio: ad2s1200: Move driver out of staging	2018-05-20 12:17:48 +01:00
Makefile	staging: iio: ad2s1200: Move driver out of staging	2018-05-20 12:17:48 +01:00