linux/drivers/usb/serial
Macpaul Lin 15b694e96c USB: serial: option: add Quectel RM500K module support
Add usb product id of the Quectel RM500K module.

RM500K provides 2 mandatory interfaces to Linux host after enumeration.
 - /dev/ttyUSB5: this is a serial interface for control path. User needs
   to write AT commands to this device node to query status, set APN,
   set PIN code, and enable/disable the data connection to 5G network.
 - ethX: this is the data path provided as a RNDIS devices. After the
   data connection has been established, Linux host can access 5G data
   network via this interface.

"RNDIS": RNDIS + ADB + AT (/dev/ttyUSB5) + MODEM COMs

usb-devices output for 0x7001:
T:  Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  3 Spd=480 MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=7001 Rev=00.01
S:  Manufacturer=MediaTek Inc.
S:  Product=USB DATA CARD
S:  SerialNumber=869206050009672
C:  #Ifs=10 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=ff Driver=rndis_host
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=125us
I:  If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Co-developed-by: Ballon Shi <ballon.shi@quectel.com>
Signed-off-by: Ballon Shi <ballon.shi@quectel.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
2022-06-23 13:58:05 +02:00
..
aircable.c USB: serial: drop redundant transfer-buffer casts 2020-07-09 09:20:17 +02:00
ark3116.c tty: remove CMSPAR ifdefs 2022-05-19 18:26:16 +02:00
belkin_sa.c tty: make use of tty_get_{char,frame}_size 2021-06-15 14:03:27 +02:00
belkin_sa.h
bus.c bus: Make remove callback return void 2021-07-21 11:53:42 +02:00
ch341.c Revert "USB: serial: ch341: add new Product ID for CH341A" 2022-02-21 09:58:14 +01:00
console.c USB: serial: console: add support for flow control 2020-07-02 10:38:45 +02:00
cp210x.c USB: serial: cp210x: add PIDs for Kamstrup USB Meter Reader 2022-04-20 09:19:42 +02:00
cyberjack.c USB: serial: make usb_serial_driver::write_room return uint 2021-05-19 10:56:40 +02:00
cypress_m8.c USB: serial: replace symbolic permissions by octal permissions 2021-08-26 09:38:27 +02:00
cypress_m8.h USB: serial: cypress_m8: enable Simply Automated UPB PIM 2020-06-23 09:56:17 +02:00
digi_acceleport.c USB: serial: drop irq-flags initialisations 2021-05-21 15:46:25 +02:00
empeg.c
ezusb_convert.pl
f81232.c USB: serial: make use of UART_LCR_WLEN() + tty_get_char_size() 2022-02-28 21:49:06 +01:00
f81534.c USB: serial: make use of UART_LCR_WLEN() + tty_get_char_size() 2022-02-28 21:49:06 +01:00
ftdi_sio_ids.h USB: serial: ftdi_sio: add support for Brainboxes US-159/235/320 2022-02-01 11:53:43 +01:00
ftdi_sio.c USB: serial: ftdi_sio: clean up printk format specifier 2022-05-05 14:09:31 +02:00
ftdi_sio.h USB: Fix up terminology 2020-07-01 14:04:04 +02:00
garmin_gps.c USB: serial: replace symbolic permissions by octal permissions 2021-08-26 09:38:27 +02:00
generic.c USB: serial: make usb_serial_driver::chars_in_buffer return uint 2021-05-19 10:56:41 +02:00
io_16654.h
io_edgeport.c USB: serial: io_edgeport: drop unused descriptor helper 2021-07-30 17:15:39 +02:00
io_edgeport.h USB: serial: io_edgeport: drop unused definitions 2021-04-08 09:50:04 +02:00
io_ionsp.h
io_ti.c USB: serial: io_ti: add Agilent E5805A support 2022-06-09 14:13:28 +02:00
io_ti.h USB: serial: io_ti: drop unnecessary packed attributes 2021-04-13 18:23:34 +02:00
io_usbvend.h USB: serial: io_ti: add Agilent E5805A support 2022-06-09 14:13:28 +02:00
ipaq.c USB: serial: replace symbolic permissions by octal permissions 2021-08-26 09:38:27 +02:00
ipw.c
ir-usb.c USB: serial: make usb_serial_driver::write_room return uint 2021-05-19 10:56:40 +02:00
iuu_phoenix.c USB: serial: replace symbolic permissions by octal permissions 2021-08-26 09:38:27 +02:00
iuu_phoenix.h
Kconfig USB: serial: simple: add Nokia phone driver 2022-03-03 09:27:36 +01:00
keyspan_pda.c USB: serial: keyspan_pda: use usb_control_msg_recv() 2021-09-21 14:23:23 +02:00
keyspan_usa26msg.h
keyspan_usa28msg.h
keyspan_usa49msg.h
keyspan_usa67msg.h
keyspan_usa90msg.h
keyspan.c USB: serial: keyspan: fix memleak on probe errors 2021-10-27 15:18:59 +02:00
kl5kusb105.c USB: serial: kl5kusb105: drop line-status helper 2021-09-22 09:33:17 +02:00
kl5kusb105.h
kobil_sct.c USB: serial: make usb_serial_driver::write_room return uint 2021-05-19 10:56:40 +02:00
kobil_sct.h
Makefile USB: serial: add MaxLinear/Exar USB to Serial driver 2021-01-21 10:49:37 +01:00
Makefile-keyspan_pda_fw
mct_u232.c USB: serial: make remove callback return void 2021-02-09 13:13:58 +01:00
mct_u232.h
metro-usb.c USB: serial: drop irq-flags initialisations 2021-05-21 15:46:25 +02:00
mos7720.c USB: serial: make use of UART_LCR_WLEN() + tty_get_char_size() 2022-02-28 21:49:06 +01:00
mos7840.c USB: serial: mos7840: remove duplicated 0xac24 device ID 2021-09-20 11:19:55 +02:00
mxuport.c USB: serial: mxuport: drop short control-transfer check 2021-01-18 14:26:14 +01:00
navman.c
omninet.c USB: serial: omninet: update driver description 2021-05-25 08:59:17 +02:00
opticon.c USB: serial: make usb_serial_driver::chars_in_buffer return uint 2021-05-19 10:56:41 +02:00
option.c USB: serial: option: add Quectel RM500K module support 2022-06-23 13:58:05 +02:00
oti6858.c USB: serial: make usb_serial_driver::chars_in_buffer return uint 2021-05-19 10:56:41 +02:00
oti6858.h
pl2303.c USB: serial: pl2303: add support for more HXN (G) types 2022-06-22 08:52:03 +02:00
pl2303.h USB: serial: pl2303: add device id for HP LM930 Display 2022-05-05 13:31:03 +02:00
qcaux.c
qcserial.c USB: serial: qcserial: add support for Sierra Wireless EM7590 2022-05-05 15:15:15 +02:00
quatech2.c USB: serial: make use of UART_LCR_WLEN() + tty_get_char_size() 2022-02-28 21:49:06 +01:00
safe_serial.c
sierra.c USB: serial: replace symbolic permissions by octal permissions 2021-08-26 09:38:27 +02:00
spcp8x5.c USB: serial: make remove callback return void 2021-02-09 13:13:58 +01:00
ssu100.c USB: serial: make use of UART_LCR_WLEN() + tty_get_char_size() 2022-02-28 21:49:06 +01:00
symbolserial.c USB: serial: make remove callback return void 2021-02-09 13:13:58 +01:00
ti_usb_3410_5052.c USB-serial updates for 5.14-rc1 2021-06-24 12:54:28 +02:00
upd78f0730.c USB: serial: do not use tty class device for debugging 2021-04-09 17:55:21 +02:00
usb_debug.c
usb_wwan.c USB: serial: usb_wwan: remove redundant assignment to variable i 2022-03-08 18:51:02 +01:00
usb-serial-simple.c USB: serial: simple: add Nokia phone driver 2022-03-03 09:27:36 +01:00
usb-serial.c USB: serial: allow hung up ports to be suspended 2021-09-20 11:49:34 +02:00
usb-wwan.h USB: serial: make usb_serial_driver::chars_in_buffer return uint 2021-05-19 10:56:41 +02:00
visor.c
visor.h
whiteheat.c tty: remove CMSPAR ifdefs 2022-05-19 18:26:16 +02:00
whiteheat.h
wishbone-serial.c
xr_serial.c USB: serial: xr: add copyright notice 2021-04-13 18:36:39 +02:00
xsens_mt.c