linux/drivers/net/wireless/hostap/hostap_cs.c
Tim Gardner d6a574ff6b hostap: Protect against initialization interrupt
Use an irq spinlock to hold off the IRQ handler until
enough early card init is complete such that the handler
can run without faulting.

Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Cc: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-15 15:44:41 -04:00

856 lines
22 KiB
C

#define PRISM2_PCCARD
#include <linux/module.h>
#include <linux/init.h>
#include <linux/if.h>
#include <linux/slab.h>
#include <linux/wait.h>
#include <linux/timer.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/workqueue.h>
#include <linux/wireless.h>
#include <net/iw_handler.h>
#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
#include <pcmcia/ds.h>
#include <asm/io.h>
#include "hostap_wlan.h"
static dev_info_t dev_info = "hostap_cs";
MODULE_AUTHOR("Jouni Malinen");
MODULE_DESCRIPTION("Support for Intersil Prism2-based 802.11 wireless LAN "
"cards (PC Card).");
MODULE_SUPPORTED_DEVICE("Intersil Prism2-based WLAN cards (PC Card)");
MODULE_LICENSE("GPL");
static int ignore_cis_vcc;
module_param(ignore_cis_vcc, int, 0444);
MODULE_PARM_DESC(ignore_cis_vcc, "Ignore broken CIS VCC entry");
/* struct local_info::hw_priv */
struct hostap_cs_priv {
struct pcmcia_device *link;
int sandisk_connectplus;
};
#ifdef PRISM2_IO_DEBUG
static inline void hfa384x_outb_debug(struct net_device *dev, int a, u8 v)
{
struct hostap_interface *iface;
local_info_t *local;
unsigned long flags;
iface = netdev_priv(dev);
local = iface->local;
spin_lock_irqsave(&local->lock, flags);
prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTB, a, v);
outb(v, dev->base_addr + a);
spin_unlock_irqrestore(&local->lock, flags);
}
static inline u8 hfa384x_inb_debug(struct net_device *dev, int a)
{
struct hostap_interface *iface;
local_info_t *local;
unsigned long flags;
u8 v;
iface = netdev_priv(dev);
local = iface->local;
spin_lock_irqsave(&local->lock, flags);
v = inb(dev->base_addr + a);
prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INB, a, v);
spin_unlock_irqrestore(&local->lock, flags);
return v;
}
static inline void hfa384x_outw_debug(struct net_device *dev, int a, u16 v)
{
struct hostap_interface *iface;
local_info_t *local;
unsigned long flags;
iface = netdev_priv(dev);
local = iface->local;
spin_lock_irqsave(&local->lock, flags);
prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTW, a, v);
outw(v, dev->base_addr + a);
spin_unlock_irqrestore(&local->lock, flags);
}
static inline u16 hfa384x_inw_debug(struct net_device *dev, int a)
{
struct hostap_interface *iface;
local_info_t *local;
unsigned long flags;
u16 v;
iface = netdev_priv(dev);
local = iface->local;
spin_lock_irqsave(&local->lock, flags);
v = inw(dev->base_addr + a);
prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INW, a, v);
spin_unlock_irqrestore(&local->lock, flags);
return v;
}
static inline void hfa384x_outsw_debug(struct net_device *dev, int a,
u8 *buf, int wc)
{
struct hostap_interface *iface;
local_info_t *local;
unsigned long flags;
iface = netdev_priv(dev);
local = iface->local;
spin_lock_irqsave(&local->lock, flags);
prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTSW, a, wc);
outsw(dev->base_addr + a, buf, wc);
spin_unlock_irqrestore(&local->lock, flags);
}
static inline void hfa384x_insw_debug(struct net_device *dev, int a,
u8 *buf, int wc)
{
struct hostap_interface *iface;
local_info_t *local;
unsigned long flags;
iface = netdev_priv(dev);
local = iface->local;
spin_lock_irqsave(&local->lock, flags);
prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INSW, a, wc);
insw(dev->base_addr + a, buf, wc);
spin_unlock_irqrestore(&local->lock, flags);
}
#define HFA384X_OUTB(v,a) hfa384x_outb_debug(dev, (a), (v))
#define HFA384X_INB(a) hfa384x_inb_debug(dev, (a))
#define HFA384X_OUTW(v,a) hfa384x_outw_debug(dev, (a), (v))
#define HFA384X_INW(a) hfa384x_inw_debug(dev, (a))
#define HFA384X_OUTSW(a, buf, wc) hfa384x_outsw_debug(dev, (a), (buf), (wc))
#define HFA384X_INSW(a, buf, wc) hfa384x_insw_debug(dev, (a), (buf), (wc))
#else /* PRISM2_IO_DEBUG */
#define HFA384X_OUTB(v,a) outb((v), dev->base_addr + (a))
#define HFA384X_INB(a) inb(dev->base_addr + (a))
#define HFA384X_OUTW(v,a) outw((v), dev->base_addr + (a))
#define HFA384X_INW(a) inw(dev->base_addr + (a))
#define HFA384X_INSW(a, buf, wc) insw(dev->base_addr + (a), buf, wc)
#define HFA384X_OUTSW(a, buf, wc) outsw(dev->base_addr + (a), buf, wc)
#endif /* PRISM2_IO_DEBUG */
static int hfa384x_from_bap(struct net_device *dev, u16 bap, void *buf,
int len)
{
u16 d_off;
u16 *pos;
d_off = (bap == 1) ? HFA384X_DATA1_OFF : HFA384X_DATA0_OFF;
pos = (u16 *) buf;
if (len / 2)
HFA384X_INSW(d_off, buf, len / 2);
pos += len / 2;
if (len & 1)
*((char *) pos) = HFA384X_INB(d_off);
return 0;
}
static int hfa384x_to_bap(struct net_device *dev, u16 bap, void *buf, int len)
{
u16 d_off;
u16 *pos;
d_off = (bap == 1) ? HFA384X_DATA1_OFF : HFA384X_DATA0_OFF;
pos = (u16 *) buf;
if (len / 2)
HFA384X_OUTSW(d_off, buf, len / 2);
pos += len / 2;
if (len & 1)
HFA384X_OUTB(*((char *) pos), d_off);
return 0;
}
/* FIX: This might change at some point.. */
#include "hostap_hw.c"
static void prism2_detach(struct pcmcia_device *p_dev);
static void prism2_release(u_long arg);
static int prism2_config(struct pcmcia_device *link);
static int prism2_pccard_card_present(local_info_t *local)
{
struct hostap_cs_priv *hw_priv = local->hw_priv;
if (hw_priv != NULL && hw_priv->link != NULL && pcmcia_dev_present(hw_priv->link))
return 1;
return 0;
}
/*
* SanDisk CompactFlash WLAN Flashcard - Product Manual v1.0
* Document No. 20-10-00058, January 2004
* http://www.sandisk.com/pdf/industrial/ProdManualCFWLANv1.0.pdf
*/
#define SANDISK_WLAN_ACTIVATION_OFF 0x40
#define SANDISK_HCR_OFF 0x42
static void sandisk_set_iobase(local_info_t *local)
{
int res;
conf_reg_t reg;
struct hostap_cs_priv *hw_priv = local->hw_priv;
reg.Function = 0;
reg.Action = CS_WRITE;
reg.Offset = 0x10; /* 0x3f0 IO base 1 */
reg.Value = hw_priv->link->io.BasePort1 & 0x00ff;
res = pcmcia_access_configuration_register(hw_priv->link,
&reg);
if (res != 0) {
printk(KERN_DEBUG "Prism3 SanDisk - failed to set I/O base 0 -"
" res=%d\n", res);
}
udelay(10);
reg.Function = 0;
reg.Action = CS_WRITE;
reg.Offset = 0x12; /* 0x3f2 IO base 2 */
reg.Value = (hw_priv->link->io.BasePort1 & 0xff00) >> 8;
res = pcmcia_access_configuration_register(hw_priv->link,
&reg);
if (res != 0) {
printk(KERN_DEBUG "Prism3 SanDisk - failed to set I/O base 1 -"
" res=%d\n", res);
}
}
static void sandisk_write_hcr(local_info_t *local, int hcr)
{
struct net_device *dev = local->dev;
int i;
HFA384X_OUTB(0x80, SANDISK_WLAN_ACTIVATION_OFF);
udelay(50);
for (i = 0; i < 10; i++) {
HFA384X_OUTB(hcr, SANDISK_HCR_OFF);
}
udelay(55);
HFA384X_OUTB(0x45, SANDISK_WLAN_ACTIVATION_OFF);
}
static int sandisk_enable_wireless(struct net_device *dev)
{
int res, ret = 0;
conf_reg_t reg;
struct hostap_interface *iface = netdev_priv(dev);
local_info_t *local = iface->local;
struct hostap_cs_priv *hw_priv = local->hw_priv;
if (hw_priv->link->io.NumPorts1 < 0x42) {
/* Not enough ports to be SanDisk multi-function card */
ret = -ENODEV;
goto done;
}
if (hw_priv->link->manf_id != 0xd601 || hw_priv->link->card_id != 0x0101) {
/* No SanDisk manfid found */
ret = -ENODEV;
goto done;
}
if (hw_priv->link->socket->functions < 2) {
/* No multi-function links found */
ret = -ENODEV;
goto done;
}
printk(KERN_DEBUG "%s: Multi-function SanDisk ConnectPlus detected"
" - using vendor-specific initialization\n", dev->name);
hw_priv->sandisk_connectplus = 1;
reg.Function = 0;
reg.Action = CS_WRITE;
reg.Offset = CISREG_COR;
reg.Value = COR_SOFT_RESET;
res = pcmcia_access_configuration_register(hw_priv->link,
&reg);
if (res != 0) {
printk(KERN_DEBUG "%s: SanDisk - COR sreset failed (%d)\n",
dev->name, res);
goto done;
}
mdelay(5);
reg.Function = 0;
reg.Action = CS_WRITE;
reg.Offset = CISREG_COR;
/*
* Do not enable interrupts here to avoid some bogus events. Interrupts
* will be enabled during the first cor_sreset call.
*/
reg.Value = COR_LEVEL_REQ | 0x8 | COR_ADDR_DECODE | COR_FUNC_ENA;
res = pcmcia_access_configuration_register(hw_priv->link,
&reg);
if (res != 0) {
printk(KERN_DEBUG "%s: SanDisk - COR sreset failed (%d)\n",
dev->name, res);
goto done;
}
mdelay(5);
sandisk_set_iobase(local);
HFA384X_OUTB(0xc5, SANDISK_WLAN_ACTIVATION_OFF);
udelay(10);
HFA384X_OUTB(0x4b, SANDISK_WLAN_ACTIVATION_OFF);
udelay(10);
done:
return ret;
}
static void prism2_pccard_cor_sreset(local_info_t *local)
{
int res;
conf_reg_t reg;
struct hostap_cs_priv *hw_priv = local->hw_priv;
if (!prism2_pccard_card_present(local))
return;
reg.Function = 0;
reg.Action = CS_READ;
reg.Offset = CISREG_COR;
reg.Value = 0;
res = pcmcia_access_configuration_register(hw_priv->link,
&reg);
if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 1 (%d)\n",
res);
return;
}
printk(KERN_DEBUG "prism2_pccard_cor_sreset: original COR %02x\n",
reg.Value);
reg.Action = CS_WRITE;
reg.Value |= COR_SOFT_RESET;
res = pcmcia_access_configuration_register(hw_priv->link,
&reg);
if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 2 (%d)\n",
res);
return;
}
mdelay(hw_priv->sandisk_connectplus ? 5 : 2);
reg.Value &= ~COR_SOFT_RESET;
if (hw_priv->sandisk_connectplus)
reg.Value |= COR_IREQ_ENA;
res = pcmcia_access_configuration_register(hw_priv->link,
&reg);
if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 3 (%d)\n",
res);
return;
}
mdelay(hw_priv->sandisk_connectplus ? 5 : 2);
if (hw_priv->sandisk_connectplus)
sandisk_set_iobase(local);
}
static void prism2_pccard_genesis_reset(local_info_t *local, int hcr)
{
int res;
conf_reg_t reg;
int old_cor;
struct hostap_cs_priv *hw_priv = local->hw_priv;
if (!prism2_pccard_card_present(local))
return;
if (hw_priv->sandisk_connectplus) {
sandisk_write_hcr(local, hcr);
return;
}
reg.Function = 0;
reg.Action = CS_READ;
reg.Offset = CISREG_COR;
reg.Value = 0;
res = pcmcia_access_configuration_register(hw_priv->link,
&reg);
if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 1 "
"(%d)\n", res);
return;
}
printk(KERN_DEBUG "prism2_pccard_genesis_sreset: original COR %02x\n",
reg.Value);
old_cor = reg.Value;
reg.Action = CS_WRITE;
reg.Value |= COR_SOFT_RESET;
res = pcmcia_access_configuration_register(hw_priv->link,
&reg);
if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 2 "
"(%d)\n", res);
return;
}
mdelay(10);
/* Setup Genesis mode */
reg.Action = CS_WRITE;
reg.Value = hcr;
reg.Offset = CISREG_CCSR;
res = pcmcia_access_configuration_register(hw_priv->link,
&reg);
if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 3 "
"(%d)\n", res);
return;
}
mdelay(10);
reg.Action = CS_WRITE;
reg.Offset = CISREG_COR;
reg.Value = old_cor & ~COR_SOFT_RESET;
res = pcmcia_access_configuration_register(hw_priv->link,
&reg);
if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 4 "
"(%d)\n", res);
return;
}
mdelay(10);
}
static struct prism2_helper_functions prism2_pccard_funcs =
{
.card_present = prism2_pccard_card_present,
.cor_sreset = prism2_pccard_cor_sreset,
.genesis_reset = prism2_pccard_genesis_reset,
.hw_type = HOSTAP_HW_PCCARD,
};
/* allocate local data and register with CardServices
* initialize dev_link structure, but do not configure the card yet */
static int hostap_cs_probe(struct pcmcia_device *p_dev)
{
int ret;
PDEBUG(DEBUG_HW, "%s: setting Vcc=33 (constant)\n", dev_info);
p_dev->conf.IntType = INT_MEMORY_AND_IO;
ret = prism2_config(p_dev);
if (ret) {
PDEBUG(DEBUG_EXTRA, "prism2_config() failed\n");
}
return ret;
}
static void prism2_detach(struct pcmcia_device *link)
{
PDEBUG(DEBUG_FLOW, "prism2_detach\n");
prism2_release((u_long)link);
/* release net devices */
if (link->priv) {
struct hostap_cs_priv *hw_priv;
struct net_device *dev;
struct hostap_interface *iface;
dev = link->priv;
iface = netdev_priv(dev);
hw_priv = iface->local->hw_priv;
prism2_free_local_data(dev);
kfree(hw_priv);
}
}
/* run after a CARD_INSERTION event is received to configure the PCMCIA
* socket and make the device available to the system */
static int prism2_config_check(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cfg,
cistpl_cftable_entry_t *dflt,
unsigned int vcc,
void *priv_data)
{
if (cfg->index == 0)
return -ENODEV;
PDEBUG(DEBUG_EXTRA, "Checking CFTABLE_ENTRY 0x%02X "
"(default 0x%02X)\n", cfg->index, dflt->index);
/* Does this card need audio output? */
if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
p_dev->conf.Status = CCSR_AUDIO_ENA;
}
/* Use power settings for Vcc and Vpp if present */
/* Note that the CIS values need to be rescaled */
if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] /
10000 && !ignore_cis_vcc) {
PDEBUG(DEBUG_EXTRA, " Vcc mismatch - skipping"
" this entry\n");
return -ENODEV;
}
} else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] /
10000 && !ignore_cis_vcc) {
PDEBUG(DEBUG_EXTRA, " Vcc (default) mismatch "
"- skipping this entry\n");
return -ENODEV;
}
}
if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
/* Do we need to allocate an interrupt? */
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d "
"dflt->io.nwin=%d\n",
cfg->io.nwin, dflt->io.nwin);
p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
PDEBUG(DEBUG_EXTRA, "io->flags = 0x%04X, "
"io.base=0x%04x, len=%d\n", io->flags,
io->win[0].base, io->win[0].len);
if (!(io->flags & CISTPL_IO_8BIT))
p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
if (!(io->flags & CISTPL_IO_16BIT))
p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
p_dev->io.IOAddrLines = io->flags &
CISTPL_IO_LINES_MASK;
p_dev->io.BasePort1 = io->win[0].base;
p_dev->io.NumPorts1 = io->win[0].len;
if (io->nwin > 1) {
p_dev->io.Attributes2 = p_dev->io.Attributes1;
p_dev->io.BasePort2 = io->win[1].base;
p_dev->io.NumPorts2 = io->win[1].len;
}
}
/* This reserves IO space but doesn't actually enable it */
return pcmcia_request_io(p_dev, &p_dev->io);
}
static int prism2_config(struct pcmcia_device *link)
{
struct net_device *dev;
struct hostap_interface *iface;
local_info_t *local;
int ret = 1;
struct hostap_cs_priv *hw_priv;
unsigned long flags;
PDEBUG(DEBUG_FLOW, "prism2_config()\n");
hw_priv = kzalloc(sizeof(*hw_priv), GFP_KERNEL);
if (hw_priv == NULL) {
ret = -ENOMEM;
goto failed;
}
/* Look for an appropriate configuration table entry in the CIS */
ret = pcmcia_loop_config(link, prism2_config_check, NULL);
if (ret) {
if (!ignore_cis_vcc)
printk(KERN_ERR "GetNextTuple(): No matching "
"CIS configuration. Maybe you need the "
"ignore_cis_vcc=1 parameter.\n");
goto failed;
}
/* Need to allocate net_device before requesting IRQ handler */
dev = prism2_init_local_data(&prism2_pccard_funcs, 0,
&link->dev);
if (dev == NULL)
goto failed;
link->priv = dev;
iface = netdev_priv(dev);
local = iface->local;
local->hw_priv = hw_priv;
hw_priv->link = link;
/*
* Make sure the IRQ handler cannot proceed until at least
* dev->base_addr is initialized.
*/
spin_lock_irqsave(&local->irq_init_lock, flags);
ret = pcmcia_request_irq(link, prism2_interrupt);
if (ret)
goto failed_unlock;
/*
* This actually configures the PCMCIA socket -- setting up
* the I/O windows and the interrupt mapping, and putting the
* card and host interface into "Memory and IO" mode.
*/
ret = pcmcia_request_configuration(link, &link->conf);
if (ret)
goto failed_unlock;
dev->irq = link->irq;
dev->base_addr = link->io.BasePort1;
spin_unlock_irqrestore(&local->irq_init_lock, flags);
/* Finally, report what we've done */
printk(KERN_INFO "%s: index 0x%02x: ",
dev_info, link->conf.ConfigIndex);
if (link->conf.Vpp)
printk(", Vpp %d.%d", link->conf.Vpp / 10,
link->conf.Vpp % 10);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
printk(", irq %d", link->irq);
if (link->io.NumPorts1)
printk(", io 0x%04x-0x%04x", link->io.BasePort1,
link->io.BasePort1+link->io.NumPorts1-1);
if (link->io.NumPorts2)
printk(" & 0x%04x-0x%04x", link->io.BasePort2,
link->io.BasePort2+link->io.NumPorts2-1);
printk("\n");
local->shutdown = 0;
sandisk_enable_wireless(dev);
ret = prism2_hw_config(dev, 1);
if (!ret)
ret = hostap_hw_ready(dev);
return ret;
failed_unlock:
spin_unlock_irqrestore(&local->irq_init_lock, flags);
failed:
kfree(hw_priv);
prism2_release((u_long)link);
return ret;
}
static void prism2_release(u_long arg)
{
struct pcmcia_device *link = (struct pcmcia_device *)arg;
PDEBUG(DEBUG_FLOW, "prism2_release\n");
if (link->priv) {
struct net_device *dev = link->priv;
struct hostap_interface *iface;
iface = netdev_priv(dev);
prism2_hw_shutdown(dev, 0);
iface->local->shutdown = 1;
}
pcmcia_disable_device(link);
PDEBUG(DEBUG_FLOW, "release - done\n");
}
static int hostap_cs_suspend(struct pcmcia_device *link)
{
struct net_device *dev = (struct net_device *) link->priv;
int dev_open = 0;
struct hostap_interface *iface = NULL;
if (!dev)
return -ENODEV;
iface = netdev_priv(dev);
PDEBUG(DEBUG_EXTRA, "%s: CS_EVENT_PM_SUSPEND\n", dev_info);
if (iface && iface->local)
dev_open = iface->local->num_dev_open > 0;
if (dev_open) {
netif_stop_queue(dev);
netif_device_detach(dev);
}
prism2_suspend(dev);
return 0;
}
static int hostap_cs_resume(struct pcmcia_device *link)
{
struct net_device *dev = (struct net_device *) link->priv;
int dev_open = 0;
struct hostap_interface *iface = NULL;
if (!dev)
return -ENODEV;
iface = netdev_priv(dev);
PDEBUG(DEBUG_EXTRA, "%s: CS_EVENT_PM_RESUME\n", dev_info);
if (iface && iface->local)
dev_open = iface->local->num_dev_open > 0;
prism2_hw_shutdown(dev, 1);
prism2_hw_config(dev, dev_open ? 0 : 1);
if (dev_open) {
netif_device_attach(dev);
netif_start_queue(dev);
}
return 0;
}
static struct pcmcia_device_id hostap_cs_ids[] = {
PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100),
PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300),
PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777),
PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000),
PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002),
PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x3301),
PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002),
PCMCIA_DEVICE_MANF_CARD(0x026f, 0x030b),
PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612),
PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613),
PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0002),
PCMCIA_DEVICE_MANF_CARD(0x02aa, 0x0002),
PCMCIA_DEVICE_MANF_CARD(0x02d2, 0x0001),
PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x0001),
PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300),
/* PCMCIA_DEVICE_MANF_CARD(0xc00f, 0x0000), conflict with pcnet_cs */
PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002),
PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002),
PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005),
PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0010),
PCMCIA_DEVICE_MANF_CARD(0x0126, 0x0002),
PCMCIA_DEVICE_MANF_CARD_PROD_ID1(0xd601, 0x0005, "ADLINK 345 CF",
0x2d858104),
PCMCIA_DEVICE_MANF_CARD_PROD_ID1(0x0156, 0x0002, "INTERSIL",
0x74c5e40d),
PCMCIA_DEVICE_MANF_CARD_PROD_ID1(0x0156, 0x0002, "Intersil",
0x4b801a17),
PCMCIA_MFC_DEVICE_PROD_ID12(0, "SanDisk", "ConnectPlus",
0x7a954bd9, 0x74be00c6),
PCMCIA_DEVICE_PROD_ID123(
"Addtron", "AWP-100 Wireless PCMCIA", "Version 01.02",
0xe6ec52ce, 0x08649af2, 0x4b74baa0),
PCMCIA_DEVICE_PROD_ID123(
"D", "Link DWL-650 11Mbps WLAN Card", "Version 01.02",
0x71b18589, 0xb6f1b0ab, 0x4b74baa0),
PCMCIA_DEVICE_PROD_ID123(
"Instant Wireless ", " Network PC CARD", "Version 01.02",
0x11d901af, 0x6e9bd926, 0x4b74baa0),
PCMCIA_DEVICE_PROD_ID123(
"SMC", "SMC2632W", "Version 01.02",
0xc4f8b18b, 0x474a1f2a, 0x4b74baa0),
PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-CF-S11G",
0x2decece3, 0x82067c18),
PCMCIA_DEVICE_PROD_ID12("Compaq", "WL200_11Mbps_Wireless_PCI_Card",
0x54f7c49c, 0x15a75e5b),
PCMCIA_DEVICE_PROD_ID12("INTERSIL", "HFA384x/IEEE",
0x74c5e40d, 0xdb472a18),
PCMCIA_DEVICE_PROD_ID12("Linksys", "Wireless CompactFlash Card",
0x0733cc81, 0x0c52f395),
PCMCIA_DEVICE_PROD_ID12(
"ZoomAir 11Mbps High", "Rate wireless Networking",
0x273fe3db, 0x32a1eaee),
PCMCIA_DEVICE_PROD_ID123(
"Pretec", "CompactWLAN Card 802.11b", "2.5",
0x1cadd3e5, 0xe697636c, 0x7a5bfcf1),
PCMCIA_DEVICE_PROD_ID123(
"U.S. Robotics", "IEEE 802.11b PC-CARD", "Version 01.02",
0xc7b8df9d, 0x1700d087, 0x4b74baa0),
PCMCIA_DEVICE_PROD_ID123(
"Allied Telesyn", "AT-WCL452 Wireless PCMCIA Radio",
"Ver. 1.00",
0x5cd01705, 0x4271660f, 0x9d08ee12),
PCMCIA_DEVICE_PROD_ID123(
"Wireless LAN" , "11Mbps PC Card", "Version 01.02",
0x4b8870ff, 0x70e946d1, 0x4b74baa0),
PCMCIA_DEVICE_PROD_ID3("HFA3863", 0x355cb092),
PCMCIA_DEVICE_PROD_ID3("ISL37100P", 0x630d52b2),
PCMCIA_DEVICE_PROD_ID3("ISL37101P-10", 0xdd97a26b),
PCMCIA_DEVICE_PROD_ID3("ISL37300P", 0xc9049a39),
PCMCIA_DEVICE_NULL
};
MODULE_DEVICE_TABLE(pcmcia, hostap_cs_ids);
static struct pcmcia_driver hostap_driver = {
.drv = {
.name = "hostap_cs",
},
.probe = hostap_cs_probe,
.remove = prism2_detach,
.owner = THIS_MODULE,
.id_table = hostap_cs_ids,
.suspend = hostap_cs_suspend,
.resume = hostap_cs_resume,
};
static int __init init_prism2_pccard(void)
{
return pcmcia_register_driver(&hostap_driver);
}
static void __exit exit_prism2_pccard(void)
{
pcmcia_unregister_driver(&hostap_driver);
}
module_init(init_prism2_pccard);
module_exit(exit_prism2_pccard);