linux/arch/arm/boot/dts
Linus Torvalds 1a32c58bb9 arm-soc: mvebu platform changes
This series contains changes for the Marvell EBU platforms (mvebu,
 orion, kirkwood, dove) that were not part of the first set of pull
 requests because of dependencies on the MMC tree, and being submitted
 a little late.
 
 Notable changes are:
 
 * More devices get moved out of board files into device tree
   descriptions. The remaining devices listed in there have patches
   that will get sent for 3.10, after which we can remove a lot of the
   board files entirely. We are doing the pinctrl and mmc drivers here,
   ethernet and PCI still remain.
 
 * SMP support for mvebu is improved with support for the
   local interrupt controller.
 
 * The Guruplug board file gets replaced with a DT description.
 
 Unfortunately, the dependency on the MMC tree turned out to be a much
 larger problem than expected, when the MMC maintainer rebased the patches
 in his tree that all of the patches in this branch are based on, which
 caused merge conflicts between the new and old versions of those patches.
 
 To work around the merge conflicts, this branch rebases all patches
 on top of the respective MMC patches that did get merged into 3.9.
 The patches are all identical to the versions that were part of
 linux-next, but have a new commit date.
 
 Merge conflicts:
 
 * in board-nsa310.c, the gpio.h inclusion was removed prematurely and
   put back as a bug fix earlier. With this series it is really not needed
   any more.
 
 * The patch to add rtc support was already applied by Andrew Morton,
   and conflicts with a second copy that was in this series, which adds
   a lot of other devices to arch/arm/boot/dts/armada-370-xp.dtsi.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUS+/hWCrR//JCVInAQK/eBAA0RskNuX3dL4Tn0FUBQfA11hMXyNLSLdY
 mwNE91jJO0Q6NIjSlZCMV0pqEhoVlWlKnHcD76ID68qxNHiU4XMyxT/NkwTQAdOC
 lKry+X8B5yt4kYiQp5adpME0rTHqtCQ9pNswU7j40ENNiOfwNk34O+PfNvh+FDkn
 s2mmLjyAbJgO1n5SGVETaVCGAW1/1dcCSxOV2BqUzn2AecTHmZb1lS8W+y761+Yi
 1V+Y3Xp4EJngN/OGtCNNfJ3H627MERfUF80xeijE2elhrdmynkBN1oOb4H+1AX6w
 Tsi4BUYd5BkeETgsskOeZevkbRq4LZGHueaofh9i11enjgVE09Z/P3eL2K6/UbBA
 mVA7+i1UujTcrEOUNO+EJ/AKvz7BU9trI4gR/RDHEkg2vzIHtsqMnDf44cQESxTn
 7AgLo+G5nG10hucgcTNse3Ev2k4wQpdev5QX3uGKVNW7PPoxY/abSYKtWek6TjGd
 nMGMI0+Re17Ej83SCXEJOvHmaA5IQDJJQOVLz/IxNuHE8HjEwJmguQy/YFzyZ0dQ
 Rha3iaLXrWBLt5jIYOIdI0K6S4KUp5mZCax2MK/c6D18Tiuk4iIA9yD1doL4a3g8
 AWoRL23ajabVa+Pg+EHqOsSUCfNI4+teMuio8vsJifudxZ6R8vYgJqdzIklwCkl3
 0l2Xvnf55Ks=
 =7l0+
 -----END PGP SIGNATURE-----

Merge tag 'late-mvebu-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC mvebu platform changes from Olof Johansson:
 "This series contains changes for the Marvell EBU platforms (mvebu,
  orion, kirkwood, dove) that were not part of the first set of pull
  requests because of dependencies on the MMC tree, and being submitted
  a little late.

  Notable changes are:

   - More devices get moved out of board files into device tree
     descriptions.  The remaining devices listed in there have patches
     that will get sent for 3.10, after which we can remove a lot of the
     board files entirely.  We are doing the pinctrl and mmc drivers
     here, ethernet and PCI still remain.

   - SMP support for mvebu is improved with support for the local
     interrupt controller.

   - The Guruplug board file gets replaced with a DT description.

  Unfortunately, the dependency on the MMC tree turned out to be a much
  larger problem than expected, when the MMC maintainer rebased the
  patches in his tree that all of the patches in this branch are based
  on, which caused merge conflicts between the new and old versions of
  those patches.

  To work around the merge conflicts, this branch rebases all patches on
  top of the respective MMC patches that did get merged into 3.9.  The
  patches are all identical to the versions that were part of
  linux-next, but have a new commit date."

* tag 'late-mvebu-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (90 commits)
  arm: mvebu: enable the SD card slot on Armada 370 Reference Design board
  ARM: kirkwood: topkick: init mvsdio via DT
  ARM: kirkwood: nsa310: convert to pinctrl
  ARM: Kirkwood: topkick: Enable i2c bus.
  ARM: kirkwood: topkick: convert to pinctrl
  ARM: dove: convert serial DT nodes to clocks property
  arm: mvebu: Add SPI flash on Armada 370 DB board
  arm: mvebu: Add SPI flash on Armada XP-DB board
  arm: mvebu: Add SPI flash on Armada XP-GP board
  arm: mvebu: Add support for SPI controller in Armada 370/XP
  clocksource: update and move armada-370-xp-timer documentation to timer directory
  arm: mvebu: update DT to support local timers
  ARM: Dove: convert usb host controller to DT
  arm: mvebu: Enable USB controllers on Armada 370/XP boards
  arm: mvebu: Add support for USB host controllers in Armada 370/XP
  arm: mvebu: add button for OpenBlocks AX3-4
  ARM: Kirkwood: Convert NS2 to gpio-poweroff.
  ARM: Kirkwood: Convert NSA310 I2C to device tree
  ARM: Kirkwood: Convert NSA310 to use gpio-poweroff driver
  ARM: Kirkwood: Convert NSA310 to DT based regulators.
  ...
2013-02-28 20:09:24 -08:00
..
testcases
aks-cdu.dts ARM: at91: Add support for board aks-cdu 2012-07-09 20:45:31 +02:00
am33xx.dtsi ARM: DTS: AM33XX: Add nodes for OCMC RAM and WKUP-M3 2013-02-08 07:26:15 -07:00
am335x-bone.dts Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next 2012-12-12 18:07:07 -08:00
am335x-evm.dts Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next 2012-12-12 18:07:07 -08:00
am335x-evmsk.dts ARM: dts: AM33XX: Add push-buttons device tree data to am335x-evmsk 2012-11-06 15:45:53 +01:00
am3517_mt_ventoux.dts arm/dts: mt_ventoux: very basic support for TeeJet Mt.Ventoux board 2012-03-05 13:48:03 -08:00
am3517-evm.dts arm/dts: Add support for TI AM3517/05 EVM board 2012-07-02 01:27:44 -07:00
animeo_ip.dts ARM: at91: Animeo IP: enable watchdog support 2013-02-07 16:40:07 +01:00
armada-370-db.dts arm: mvebu: Add SPI flash on Armada 370 DB board 2013-02-28 18:57:15 +01:00
armada-370-mirabox.dts arm: mvebu: Enable USB controllers on Armada 370/XP boards 2013-02-28 18:57:13 +01:00
armada-370-rd.dts arm: mvebu: enable the SD card slot on Armada 370 Reference Design board 2013-02-28 18:57:16 +01:00
armada-370-xp.dtsi arm: mvebu: Add support for SPI controller in Armada 370/XP 2013-02-28 18:57:14 +01:00
armada-370.dtsi arm: mvebu: Add support for USB host controllers in Armada 370/XP 2013-02-28 18:57:13 +01:00
armada-xp-db.dts arm: mvebu: Add SPI flash on Armada XP-DB board 2013-02-28 18:57:15 +01:00
armada-xp-gp.dts arm: mvebu: Add SPI flash on Armada XP-GP board 2013-02-28 18:57:14 +01:00
armada-xp-mv78230.dtsi arm: mvebu: add pin muxing options for the SDIO interface on Armada XP 2013-02-28 18:57:09 +01:00
armada-xp-mv78260.dtsi arm: mvebu: add pin muxing options for the SDIO interface on Armada XP 2013-02-28 18:57:09 +01:00
armada-xp-mv78460.dtsi arm: mvebu: add pin muxing options for the SDIO interface on Armada XP 2013-02-28 18:57:09 +01:00
armada-xp-openblocks-ax3-4.dts arm: mvebu: Enable USB controllers on Armada 370/XP boards 2013-02-28 18:57:13 +01:00
armada-xp.dtsi arm: mvebu: Add support for USB host controllers in Armada 370/XP 2013-02-28 18:57:13 +01:00
at91rm9200.dtsi ARM: at91: add EMAC bindings to RM9200 DT 2013-02-07 16:40:09 +01:00
at91rm9200ek.dts ARM: at91: add EMAC bindings to RM9200 DT 2013-02-07 16:40:09 +01:00
at91sam9g15.dtsi arm: at91: dt: at91sam9 add serial pinctrl support 2012-10-13 09:21:44 +08:00
at91sam9g15ek.dts arm: at91: dt: at91sam9 add serial pinctrl support 2012-10-13 09:21:44 +08:00
at91sam9g20.dtsi ARM: dts: add twi nodes for atmel SoCs 2012-09-12 14:49:16 +02:00
at91sam9g20ek_2mmc.dts ARM: at91: dt: add mmc pinctrl for Atmel reference boards 2012-11-20 01:10:27 +08:00
at91sam9g20ek_common.dtsi Sound updates for 3.8-rc1 2012-12-13 11:51:23 -08:00
at91sam9g20ek.dts ARM: at91: add at91sam9g20ek boards dt support 2012-04-20 23:17:05 +08:00
at91sam9g25.dtsi arm: at91: dt: at91sam9 add serial pinctrl support 2012-10-13 09:21:44 +08:00
at91sam9g25ek.dts arm: at91: dt: at91sam9 add serial pinctrl support 2012-10-13 09:21:44 +08:00
at91sam9g35.dtsi arm: at91: dt: at91sam9 add serial pinctrl support 2012-10-13 09:21:44 +08:00
at91sam9g35ek.dts arm: at91: dt: at91sam9 add serial pinctrl support 2012-10-13 09:21:44 +08:00
at91sam9g45.dtsi ARM: at91/dts: add pinctrl support for SSC peripheral 2013-01-12 00:00:23 +00:00
at91sam9m10g45ek.dts ARM: at91: dt: add mmc pinctrl for Atmel reference boards 2012-11-20 01:10:27 +08:00
at91sam9n12.dtsi arm-soc: device tree conversions 2013-02-21 15:38:49 -08:00
at91sam9n12ek.dts ARM: at91: at91sam9n12: add DT parameters to enable PMECC 2013-02-07 16:45:06 +01:00
at91sam9x5.dtsi arm-soc: device tree conversions 2013-02-21 15:38:49 -08:00
at91sam9x5cm.dtsi ARM: at91: at91sam9x5: add DT parameters to enable PMECC 2013-02-07 16:45:05 +01:00
at91sam9x5ek.dtsi ARM: at91: dt: add mmc pinctrl for Atmel reference boards 2012-11-20 01:10:27 +08:00
at91sam9x25.dtsi ARM: at91sam9: add macb pinctrl support 2012-11-19 06:54:25 +08:00
at91sam9x25ek.dts arm: at91: dt: at91sam9 add serial pinctrl support 2012-10-13 09:21:44 +08:00
at91sam9x35.dtsi arm: at91: dt: at91sam9 add serial pinctrl support 2012-10-13 09:21:44 +08:00
at91sam9x35ek.dts arm: at91: dt: at91sam9 add serial pinctrl support 2012-10-13 09:21:44 +08:00
at91sam9260.dtsi ARM: at91/dts: add pinctrl support for SSC peripheral 2013-01-12 00:00:23 +00:00
at91sam9263.dtsi ARM: at91/dts: add pinctrl support for SSC peripheral 2013-01-12 00:00:23 +00:00
at91sam9263ek.dts ARM: at91: dt: add mmc pinctrl for Atmel reference boards 2012-11-20 01:10:27 +08:00
bcm2835-rpi-b.dts ARM: bcm2835: add I2C controllers to DT 2013-01-14 21:47:09 -07:00
bcm2835.dtsi ARM: bcm2835: fix clock node aliasing in device tree 2013-01-14 21:47:09 -07:00
bcm11351-brt.dts Add support for generic BCM SoC chipsets 2012-11-19 22:39:07 -08:00
bcm11351.dtsi Add support for generic BCM SoC chipsets 2012-11-19 22:39:07 -08:00
ccu9540.dts ARM: ux500: List DT compatibility using platform names rather than by board 2012-11-01 13:02:25 +01:00
cros5250-common.dtsi ARM: dts: correct the dw-mshc timing properties as per binding 2013-01-16 15:45:52 -08:00
da850-enbw-cmc.dts ARM: davinci: add support for am1808 based EnBW CMC board 2012-10-29 15:43:43 +05:30
da850-evm.dts ARM: davinci: da850: add wdt DT node 2013-02-09 22:38:26 +05:30
da850.dtsi ARM: davinci: da850: add wdt DT node 2013-02-09 22:38:26 +05:30
dbx5x0.dtsi ARM: ux500: correct typo in pinctrl Device Tree node 2013-01-30 19:10:07 +01:00
dove-cm-a510.dts ARM: dove: add device tree descriptors 2012-09-21 17:07:24 +00:00
dove-cubox.dts ARM: Dove: add fixed regulator for CuBox USB power 2013-02-28 18:57:12 +01:00
dove-dove-db.dts ARM: dove: add device tree descriptors 2012-09-21 17:07:24 +00:00
dove.dtsi ARM: dove: convert serial DT nodes to clocks property 2013-02-28 18:57:15 +01:00
ea3250.dts ARM: LPC32xx: Extend dts for EA3250 board 2012-09-06 11:40:48 +02:00
ecx-2000.dts ARM: dts: add device_type prop to cpu nodes on Calxeda platforms 2013-01-07 21:08:23 -08:00
ecx-common.dtsi ARM: dts: Add Calxeda ECX-2000 support 2012-10-31 13:46:17 -05:00
elpida_ecb240abacn.dtsi ARM: dts: EMIF and LPDDR2 device tree data for OMAP4 boards 2012-09-07 19:18:40 +02:00
emev2-kzm9d.dts ARM: mach-shmobile: kzm9d: update defconfig 2013-01-15 08:57:09 +09:00
emev2.dtsi ARM: mach-shmobile: emev2: Add reg and device_type properties to cpus 2013-01-29 11:44:59 +09:00
ethernut5.dts Ethernut 5 board support 2012-04-27 23:23:22 +08:00
evk-pro3.dts ARM: at91/dts: evk-pro3: enable watchdog 2012-11-16 15:48:48 +01:00
exynos4.dtsi ARM: arm-soc: device tree conversions and enablement 2012-12-13 10:39:26 -08:00
exynos4x12-pinctrl.dtsi ARM: dts: Correct pin configuration of SD 4 for exynos4x12-pinctrl 2013-02-12 10:35:50 -08:00
exynos4x12.dtsi ARM: dts: fix compatible value for exynos pinctrl 2013-01-28 14:27:50 -08:00
exynos4210-origen.dts ARM: dts: Add vmmc fixed voltage regulator for exynos4210-origen 2012-11-22 00:38:56 +09:00
exynos4210-pinctrl.dtsi ARM: dts: Use drive strength 3 for SD pins for exynos4 2012-11-22 00:39:01 +09:00
exynos4210-smdkv310.dts ARM: dts: use uart port1 for console on exynos4210-smdkv310 2012-12-28 09:35:35 -08:00
exynos4210-trats.dts ARM: dts: Remove broken-voltage property from sdhci node for exynos4210-trats 2012-11-20 20:17:20 +09:00
exynos4210.dtsi ARM: dts: fix compatible value for exynos pinctrl 2013-01-28 14:27:50 -08:00
exynos4212.dtsi ARM: dts: Add support for EXYNOS4X12 SoCs 2012-11-07 08:52:25 +09:00
exynos4412-smdk4412.dts ARM: dts: add board dts file for EXYNOS4412 based SMDK board 2012-11-07 09:12:10 +09:00
exynos4412.dtsi ARM: dts: Add support for EXYNOS4X12 SoCs 2012-11-07 08:52:25 +09:00
exynos5250-smdk5250.dts MMC highlights for 3.9: 2013-02-26 09:31:09 -08:00
exynos5250-snow.dts ARM: dts: Add board dts file for Snow board (ARM Chromebook) 2012-11-21 13:32:21 +09:00
exynos5250.dtsi Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma 2013-02-26 09:24:48 -08:00
exynos5440-ssdk5440.dts ARM: dts: use uart port0 for console on exynos5440-ssdk5440 2012-12-28 09:35:14 -08:00
exynos5440.dtsi ARM: dts: fix tick and alarm irq numbers for exynos5440 2013-01-28 14:27:50 -08:00
ge863-pro3.dtsi ARM: at91: add support for Telit EVK-PRO3 with Telit GE863-PRO3 2012-07-09 20:22:00 +02:00
highbank.dts cpufreq / highbank: add support for highbank cpufreq 2013-02-02 00:01:15 +01:00
href.dtsi ARM: ux500: Add support for gpio-keys and Proximity Sensor for HREF 2012-11-01 12:59:32 +01:00
hrefprev60.dts ARM: ux500: Move board specific GPIO info out to subordinate DTS files 2012-11-27 10:58:27 +00:00
hrefv60plus.dts ARM: ux500: Add SDI (MMC) support to the HREF Device Tree 2012-11-20 16:10:43 +00:00
imx6dl.dtsi ARM: dts: add dtsi for imx6q and imx6dl 2013-02-10 23:25:47 +08:00
imx6q-arm2.dts ARM: dts: add dtsi for imx6q and imx6dl 2013-02-10 23:25:47 +08:00
imx6q-sabreauto.dts ARM: dts: add dtsi for imx6q and imx6dl 2013-02-10 23:25:47 +08:00
imx6q-sabrelite.dts ARM: dts: add dtsi for imx6q and imx6dl 2013-02-10 23:25:47 +08:00
imx6q-sabresd.dts ARM: dts: add dtsi for imx6q and imx6dl 2013-02-10 23:25:47 +08:00
imx6q.dtsi ARM: dts: add dtsi for imx6q and imx6dl 2013-02-10 23:25:47 +08:00
imx6qdl.dtsi ARM: dts: add dtsi for imx6q and imx6dl 2013-02-10 23:25:47 +08:00
imx23-evk.dts ARM: mxs: Let mmc0 pin detect be generic 2012-08-23 10:01:30 +08:00
imx23-olinuxino.dts ARM: dts: imx23-olinuxino: Fix IOMUX settings 2012-12-25 22:17:59 +08:00
imx23-stmp378x_devb.dts ARM: mxs: Rename 'hog-gpios' 2012-08-23 10:01:11 +08:00
imx23.dtsi ARM: mxs: Add OF props for MX23 LRADC 2013-01-26 10:07:54 +00:00
imx25-karo-tx25.dts ARM: dts: imx25-karo-tx25: Put status entry in the end 2013-02-10 23:25:43 +08:00
imx25-pdk.dts ARM: mx25pdk: Add device tree support 2013-02-10 23:25:42 +08:00
imx25.dtsi ARM: dts: imx: use nodes label in board dts 2013-02-10 23:25:42 +08:00
imx27-apf27.dts ARM: dts: imx: use nodes label in board dts 2013-02-10 23:25:42 +08:00
imx27-pdk.dts ARM: dts: imx: use nodes label in board dts 2013-02-10 23:25:42 +08:00
imx27-phytec-phycore.dts ARM: dts: mx27: Fix the AIPI bus for FEC 2012-12-17 10:49:41 +01:00
imx27.dtsi ARM: dts: mx27: Fix the AIPI bus for FEC 2012-12-17 10:49:41 +01:00
imx28-apf28.dts ARM: mxs: Add support for the Armadeus Systems APF28 module 2012-10-19 16:45:20 +08:00
imx28-apf28dev.dts ARM: mxs: apf28dev: Add I2C and SPI support 2012-11-12 10:07:43 +08:00
imx28-apx4devkit.dts ARM: mxs: Rename 'hog-gpios' 2012-08-23 10:01:11 +08:00
imx28-cfa10036.dts ARM: dts: mxs: add oled support for the cfa-10036 2012-11-22 09:03:40 +08:00
imx28-cfa10037.dts ARM: mxs: dt: Add Crystalfontz CFA-10037 device tree support 2013-01-26 13:40:37 +08:00
imx28-cfa10049.dts ARM: mxs: dts: Add rotary encoder to the CFA-10049 2013-01-31 22:31:19 +08:00
imx28-evk.dts ARM: dts: imx28-evk: Use pinctrl for gpio-led 2012-10-15 10:51:48 +08:00
imx28-m28evk.dts ARM: mxs: Enable touchscreen on m28evk 2013-01-14 08:47:51 +08:00
imx28-sps1.dts ARM: mxs: Add SchulerControl SPS1 DTS file 2012-11-20 22:09:05 +08:00
imx28-tx28.dts ARM: mxs: Rename 'hog-gpios' 2012-08-23 10:01:11 +08:00
imx28.dtsi ARM: dts: mxs: Add muxing options for the third PWM 2013-01-29 18:23:18 +08:00
imx31-bug.dts ARM: dts: imx: use nodes label in board dts 2013-02-10 23:25:42 +08:00
imx31.dtsi ARM: mx31: Replace clk_register_clkdev with clock DT lookup 2013-01-25 11:12:37 +01:00
imx51-apf51.dts ARM: dts: Add apf51 basic support 2013-02-10 23:25:45 +08:00
imx51-babbage.dts ARM i.MX51 babbage: Add keypad support 2013-02-10 23:25:43 +08:00
imx51.dtsi ARM: dts: Add apf51 basic support 2013-02-10 23:25:45 +08:00
imx53-ard.dts ARM: dts: imx: use nodes label in board dts 2013-02-10 23:25:42 +08:00
imx53-evk.dts ARM: dts: imx: use nodes label in board dts 2013-02-10 23:25:42 +08:00
imx53-mba53.dts ARM i.MX53: dts: add oftree for MBa53 baseboard 2013-02-10 23:25:44 +08:00
imx53-qsb.dts ARM: dts: imx: use nodes label in board dts 2013-02-10 23:25:42 +08:00
imx53-smd.dts ARM: dts: imx: use nodes label in board dts 2013-02-10 23:25:42 +08:00
imx53-tqma53.dtsi ARM i.MX53: add dts for the TQ tqma53 module 2013-02-10 23:25:44 +08:00
imx53.dtsi ARM: dts: Add device tree entry for onewire master on i.MX53 2013-02-10 23:25:47 +08:00
integrator.dtsi ARM: 7519/1: integrator: convert platform devices to Device Tree 2012-09-17 23:20:23 +01:00
integratorap.dts ARM: integrator: hook the AP into the SoC bus 2012-11-16 22:25:50 +01:00
integratorcp.dts ARM: integrator: hook the CP into the SoC bus 2012-11-16 22:26:07 +01:00
kirkwood-98dx4122.dtsi ARM: Kirkwood: support 98DX412x kirkwoods with pinctrl 2012-11-24 02:58:43 +00:00
kirkwood-6281.dtsi ARM: kirkwood: Convert mplcec4 board to pinctrl 2012-11-24 02:58:52 +00:00
kirkwood-6282.dtsi ARM: Kirkwood: Add pinctrl of NAND to 88f6282 2013-02-28 18:57:11 +01:00
kirkwood-dns320.dts ARM: Kirkwood: Move common portions into a kirkwood-dnskw.dtsi 2012-07-27 16:49:53 +02:00
kirkwood-dns325.dts ARM: Kirkwood: Move common portions into a kirkwood-dnskw.dtsi 2012-07-27 16:49:53 +02:00
kirkwood-dnskw.dtsi ARM: Kirkwood: Convert dnskw to pinctrl 2012-11-24 02:57:56 +00:00
kirkwood-dockstar.dts ARM: Kirkwood: Convert dockstar to pinctrl. 2012-11-24 02:58:05 +00:00
kirkwood-dreamplug.dts arm: kirkwood: dreamplug: use Device Tree to probe SDIO 2013-02-28 18:57:10 +01:00
kirkwood-goflexnet.dts ARM: Kirkwood: Convert GoFlex Net to pinctrl. 2012-11-24 02:58:18 +00:00
kirkwood-guruplug-server-plus.dts ARM: kirkwood: convert Guruplug Server Plus to use the device tree 2013-02-28 18:57:07 +01:00
kirkwood-ib62x0.dts ARM: Kirkwood: Convert ib62x0 to pinctrl. 2012-11-24 02:58:25 +00:00
kirkwood-iconnect.dts ARM: Kirkwood: Convert iConnect to pinctrl. 2012-11-24 02:57:47 +00:00
kirkwood-iomega_ix2_200.dts ARM: Kirkwood: Convert IX2-200 to pinctrl. 2012-11-24 02:58:36 +00:00
kirkwood-is2.dts ARM: kirkwood: DT board setup for Network Space v2 and parents 2012-11-21 20:58:35 +00:00
kirkwood-km_kirkwood.dts ARM: Kirkwood: Convert km_kirkwood to pinctrl 2012-11-24 02:58:48 +00:00
kirkwood-lschlv2.dts ARM: Kirkwood: Replace mrvl with marvell 2012-07-27 16:50:57 +02:00
kirkwood-lsxhl.dts ARM: Kirkwood: Replace mrvl with marvell 2012-07-27 16:50:57 +02:00
kirkwood-lsxl.dtsi ARM: Kirkwood: Convert lsxl boards to pinctrl. 2012-11-24 02:58:30 +00:00
kirkwood-mplcec4.dts arm: kirkwood: mplcec4: use Device Tree to probe SDIO 2013-02-28 18:57:11 +01:00
kirkwood-ns2-common.dtsi ARM: Kirkwood: Convert NS2 to gpio-poweroff. 2013-02-28 18:57:13 +01:00
kirkwood-ns2.dts ARM: kirkwood: DT board setup for Network Space v2 and parents 2012-11-21 20:58:35 +00:00
kirkwood-ns2lite.dts ARM: kirkwood: DT board setup for Network Space Lite v2 2012-11-21 20:58:43 +00:00
kirkwood-ns2max.dts ARM: kirkwood: DT board setup for Network Space v2 and parents 2012-11-21 20:58:35 +00:00
kirkwood-ns2mini.dts ARM: kirkwood: DT board setup for Network Space Mini v2 2012-11-21 20:58:49 +00:00
kirkwood-nsa310.dts ARM: kirkwood: nsa310: convert to pinctrl 2013-02-28 18:57:16 +01:00
kirkwood-openblocks_a6.dts ARM: Kirkwood: Convert openblocks A6 board to pinctrl 2013-02-28 18:57:11 +01:00
kirkwood-topkick.dts ARM: kirkwood: topkick: init mvsdio via DT 2013-02-28 18:57:16 +01:00
kirkwood-ts219-6281.dts ARM: Kirkwood: Convert TS219 to pinctrl. 2012-11-24 02:57:43 +00:00
kirkwood-ts219-6282.dts ARM: Kirkwood: Convert TS219 to pinctrl. 2012-11-24 02:57:43 +00:00
kirkwood-ts219.dtsi ARM: Kirkwood: Replace mrvl with marvell 2012-07-27 16:50:57 +02:00
kirkwood.dtsi arm: kirkwood: add Device Tree informations for the SDIO controller 2013-02-28 18:57:10 +01:00
kizbox.dts ARM: at91/dts: add macb mii pinctrl config for kizbox 2013-01-23 10:34:38 +01:00
lpc32xx.dtsi ARM: LPC32xx: Add the motor PWM to base dts file 2012-11-14 15:41:18 +01:00
Makefile arm-soc: mvebu platform changes 2013-02-28 20:09:24 -08:00
marco-evb.dts ARM: PRIMA2: add CSR SiRFmarco device tree .dts 2013-01-22 19:33:30 +08:00
marco.dtsi ARM: PRIMA2: add CSR SiRFmarco device tree .dts 2013-01-22 19:33:30 +08:00
mmp2-brownstone.dts mfd: max8925: Add dts 2013-02-14 00:23:01 +01:00
mmp2.dtsi mfd: max8925: Add dts 2013-02-14 00:23:01 +01:00
msm8660-surf.dts ARM: msm: Move 8660 to DT timer 2012-09-13 11:14:54 -07:00
msm8960-cdp.dts ARM: msm: Add DT support for 8960 2012-09-13 11:16:47 -07:00
omap2.dtsi ARM: dts: OMAP: Add timer nodes 2012-10-29 16:56:32 +01:00
omap3-beagle-xm.dts ARM: dts: Add omap3-beagle.dts 2012-10-29 16:56:24 +01:00
omap3-beagle.dts ARM: dts: Add omap3-beagle.dts 2012-10-29 16:56:24 +01:00
omap3-evm.dts ARM: dts: omap3: Add gpio-twl4030 properties for BeagleBoard and omap3-EVM 2012-09-07 19:22:44 +02:00
omap3-overo.dtsi ARM: dts: omap3-overo: Add support for the blue LED 2012-09-10 15:44:45 +02:00
omap3-tobi.dts ARM: dts: OMAP3: Add support for Gumstix Overo with Tobi expansion board 2012-09-10 12:07:22 +02:00
omap3.dtsi ARM: dts: OMAP: Add counter-32k nodes 2012-10-29 16:56:33 +01:00
omap4-panda-a4.dts ARM: dts: omap4-panda: Add pinmux configuration for HDMI 2012-11-07 11:50:28 +01:00
omap4-panda-es.dts ARM: dts: omap4-panda: Add pinmux configuration for HDMI 2012-11-07 11:50:28 +01:00
omap4-panda.dts ARM: dts: omap4-panda: Add pinmux configuration for HDMI 2012-11-07 11:50:28 +01:00
omap4-sdp-es23plus.dts ARM: dts: omap4-sdp: Add pinmux configuration for HDMI 2012-11-07 11:50:29 +01:00
omap4-sdp.dts ARM: dts: omap4-sdp: Add pinmux configuration for HDMI 2012-11-07 11:50:29 +01:00
omap4-var-som.dts ARM: dts: OMAP: Rename pandaES and var_som for consistency 2012-10-29 16:56:35 +01:00
omap4.dtsi ARM: dts: OMAP4: Update timer addresses 2012-11-01 17:03:31 +01:00
omap5-evm.dts ARM: dts: omap5-evm: LPDDR2 memory device details for EVM 2012-11-05 18:38:27 +01:00
omap5.dtsi ARM: dts: omap5: EMIF device tree data for OMAP5 boards 2012-11-05 18:38:03 +01:00
omap36xx.dtsi arm/dts: Add omap36xx.dtsi file and rename omap3-beagle to omap3-beagle-xm 2012-09-10 10:34:51 -07:00
omap2420-h4.dts ARM: dts: OMAP2420: Correct H4 board memory size 2012-12-14 14:49:53 -08:00
omap2420.dtsi ARM: dts: OMAP: Add counter-32k nodes 2012-10-29 16:56:33 +01:00
omap2430.dtsi ARM: dts: OMAP: Add counter-32k nodes 2012-10-29 16:56:33 +01:00
orion5x-lacie-ethernet-disk-mini-v2.dts arm: orion5x: convert 'LaCie Ethernet Disk mini v2' to Device Tree 2012-11-21 21:00:51 +00:00
orion5x.dtsi arm: orion5x: basic Device Tree support 2012-11-21 21:00:45 +00:00
phy3250.dts ARM: LPC32xx: LED fix in PHY3250 DTS file 2012-09-25 10:11:41 +02:00
picoxcell-pc3x2.dtsi
picoxcell-pc3x3.dtsi
picoxcell-pc7302-pc3x2.dts
picoxcell-pc7302-pc3x3.dts
pm9g45.dts ARM: at91: pm9g45: add mmc support 2012-11-20 01:10:28 +08:00
prima2-evb.dts pinctrl: sirf: add DT-binding pinmux mapping support 2012-09-05 14:48:10 +08:00
prima2.dtsi clk: prima2: enable dt-binding clkdev mapping 2013-01-18 09:44:01 -08:00
pxa2xx.dtsi ARM: pxa: add .dtsi files 2012-08-16 16:15:25 +08:00
pxa3xx.dtsi ARM: pxa: add .dtsi files 2012-08-16 16:15:25 +08:00
pxa27x.dtsi ARM: pxa: add .dtsi files 2012-08-16 16:15:25 +08:00
pxa168-aspenite.dts ARM: dts: append DTS file of pxa168 2012-03-07 09:32:40 +08:00
pxa168.dtsi ARM: dts: refresh dts file for arch mmp 2012-05-05 16:39:29 +08:00
pxa910-dkb.dts ARM: dts: Enable 88pm860x pmic 2012-10-02 11:43:17 +02:00
pxa910.dtsi MFD bits for the 3.7 merge window. 2012-10-05 12:01:30 +09:00
r8a7740-armadillo800eva.dts Merge branch 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards 2013-01-29 09:02:47 -08:00
r8a7740.dtsi ARM: mach-shmobile: r8a7740 generic board support via DT 2012-07-06 21:03:35 +02:00
samsung_k3pe0e000b.dtsi ARM: dts: omap5-evm: LPDDR2 memory device details for EVM 2012-11-05 18:38:27 +01:00
sh73a0-kzm9g.dts Merge branch 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards 2013-01-29 09:02:47 -08:00
sh73a0-reference.dtsi ARM: mach-shmobile: sh73a0: Initialise MMCIF using DT 2013-01-25 12:43:49 +09:00
sh73a0.dtsi ARM: mach-shmobile: sh73a0: Add reg and device_type properties to cpus 2013-01-29 11:44:54 +09:00
sh7372-mackerel.dts Merge branch 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards 2013-01-29 09:02:47 -08:00
sh7372.dtsi ARM: mach-shmobile: sh7372 generic board support via DT V2 2012-04-11 12:19:31 +02:00
skeleton.dtsi
snowball.dts ARM: arm-soc: device tree conversions and enablement 2012-12-13 10:39:26 -08:00
socfpga_cyclone5.dts arm: socfpga: Add SMP support for actual socfpga harware 2013-02-11 19:37:26 -08:00
socfpga_vt.dts arm: socfpga: Add SMP support for actual socfpga harware 2013-02-11 19:37:26 -08:00
socfpga.dtsi arm: socfpga: Add new device tree source for actual socfpga HW 2013-02-11 19:37:19 -08:00
spear3xx.dtsi ARM: SPEAr: DT: Update device nodes 2012-11-26 16:55:28 +05:30
spear13xx.dtsi Revert "ARM: SPEAr13xx: Pass DW DMAC platform data from DT" 2013-02-20 15:48:02 +05:30
spear300-evb.dts ARM: SPEAr: DT: add uart state to fix warning 2012-11-26 15:53:52 +05:30
spear300.dtsi MTD pull for 3.8 2012-12-19 12:47:41 -08:00
spear310-evb.dts ARM: SPEAr: DT: add uart state to fix warning 2012-11-26 15:53:52 +05:30
spear310.dtsi MTD pull for 3.8 2012-12-19 12:47:41 -08:00
spear320-evb.dts ARM: SPEAr: DT: add uart state to fix warning 2012-11-26 15:53:52 +05:30
spear320-hmi.dts ARM: SPEAr320: DT: Add SPEAr 320 HMI board support 2012-11-26 16:55:33 +05:30
spear320.dtsi MTD pull for 3.8 2012-12-19 12:47:41 -08:00
spear600-evb.dts ARM: SPEAr: DT: Update device nodes 2012-11-26 16:55:28 +05:30
spear600.dtsi MTD pull for 3.8 2012-12-19 12:47:41 -08:00
spear1310-evb.dts ARM: SPEAr: DT: Update device nodes 2012-11-26 16:55:28 +05:30
spear1310.dtsi ARM: SPEAr: DT: Update device nodes 2012-11-26 16:55:28 +05:30
spear1340-evb.dts ARM: SPEAr: DT: Update device nodes 2012-11-26 16:55:28 +05:30
spear1340.dtsi Revert "ARM: SPEAr13xx: Pass DW DMAC platform data from DT" 2013-02-20 15:48:02 +05:30
ste-nomadik-s8815.dts ARM: nomadik: migrate MMC/SD card support to device tree 2013-01-28 23:24:40 +01:00
ste-nomadik-stn8815.dtsi ARM: nomadik: add I2C devices to the device tree 2013-01-28 23:24:41 +01:00
stuib.dtsi ARM: ux500: Change the type of interrupt to something compatible 2012-11-01 13:02:26 +01:00
sun4i-a10-cubieboard.dts Revert "sunxi: a10-cubieboard: Add user LEDs to the device tree" 2013-02-19 22:27:28 +01:00
sun4i-a10-hackberry.dts ARM: sunxi: Add device tree for Miniand Hackberry 2013-01-08 19:46:19 +01:00
sun4i-a10.dtsi ARM: sunxi: Add the pin groups for UART0 and UART1 on sun4i 2013-02-01 10:48:11 +01:00
sun5i-a13-olinuxino.dts Revert "sunxi: a13-olinuxino: Add user LED to the device tree" 2013-02-19 22:26:42 +01:00
sun5i-a13.dtsi ARM: sunxi: Add uart1 pinctrl groups 2013-01-22 13:51:37 +01:00
sunxi.dtsi ARM: sunxi: Use the Synosys APB UART instead of ns8250 2013-01-16 19:13:18 +01:00
tegra20-colibri-512.dtsi ARM: tegra: Add Colibri T20 512MB COM device tree 2013-01-28 11:24:09 -07:00
tegra20-harmony.dts ARM: tegra: device tree updates 2013-02-05 13:19:11 -08:00
tegra20-iris-512.dts ARM: tegra: Add Toradex Iris carrier board DT with T20 512MB COM 2013-01-28 11:24:09 -07:00
tegra20-medcom-wide.dts ARM: tegra: Add Avionic Design Medcom-Wide support 2012-09-20 09:34:00 -06:00
tegra20-paz00.dts ARM: tegra: device tree updates 2013-02-05 13:19:11 -08:00
tegra20-plutux.dts ARM: tegra: plutux: Enable HDMI output 2012-11-16 09:17:08 -07:00
tegra20-seaboard.dts ARM: tegra: device tree updates 2013-02-05 13:19:11 -08:00
tegra20-tamonten.dtsi ARM: tegra: move serial clock-frequency attr into the Tegra20 dtsi 2013-01-28 11:24:09 -07:00
tegra20-tec.dts ARM: tegra: tec: Enable HDMI output 2012-11-16 09:17:09 -07:00
tegra20-trimslice.dts ARM: tegra: device tree updates 2013-02-05 13:19:11 -08:00
tegra20-ventana.dts ARM: tegra: device tree updates 2013-02-05 13:19:11 -08:00
tegra20-whistler.dts ARM: tegra: move serial clock-frequency attr into the Tegra20 dtsi 2013-01-28 11:24:09 -07:00
tegra20.dtsi ARM: tegra: remove clock-frequency properties from serial nodes 2013-02-13 11:17:02 -07:00
tegra30-beaver.dts ARM: tegra: move serial clock-frequency attr into the Tegra30 dtsi 2013-01-28 11:24:09 -07:00
tegra30-cardhu-a02.dts ARM: dt: t30 cardhu: set pinmux and power for wlan 2012-11-15 15:07:28 -07:00
tegra30-cardhu-a04.dts ARM: dt: t30 cardhu: set pinmux and power for wlan 2012-11-15 15:07:28 -07:00
tegra30-cardhu.dtsi ARM: tegra: move serial clock-frequency attr into the Tegra30 dtsi 2013-01-28 11:24:09 -07:00
tegra30.dtsi ARM: tegra: remove clock-frequency properties from serial nodes 2013-02-13 11:17:02 -07:00
tegra114-dalmore.dts ARM: dt: tegra114: Add new board, Dalmore 2013-01-28 11:23:08 -07:00
tegra114-pluto.dts ARM: dt: tegra114: Add new board, Pluto 2013-01-28 11:23:11 -07:00
tegra114.dtsi ARM: DT: tegra114: add pinmux DT entry 2013-01-29 11:02:15 -07:00
tny_a9g20.dts arm: at91: add Calao TNY-A9260 and TNY-A9G20 board support 2012-04-20 23:17:00 +08:00
tny_a9260_common.dtsi arm: at91: add Calao TNY-A9260 and TNY-A9G20 board support 2012-04-20 23:17:00 +08:00
tny_a9260.dts arm: at91: add Calao TNY-A9260 and TNY-A9G20 board support 2012-04-20 23:17:00 +08:00
tny_a9263.dts ARM: at91: DT: add Calao TNY A9263 board support 2012-04-20 23:17:30 +08:00
tps65217.dtsi arm/dts: regulator: Add tps65217 device tree data 2012-08-30 13:59:17 -07:00
tps65910.dtsi arm/dts: regulator: Add tps65910 device tree data 2012-08-30 13:57:53 -07:00
twl4030.dtsi watchdog: twl4030_wdt: add DT support 2013-01-02 12:07:05 +01:00
twl6030.dtsi ARM: dts: Add twl6030-usb data 2012-10-29 16:56:29 +01:00
u9540.dts ARM: ux500: Enable all MMC devices on the u9540 when booting with DT 2012-11-20 16:10:46 +00:00
usb_a9g20-dab-mmx.dtsi ARM: at91/dt: add Calao DAB-MMX daugther board support for USB-A9G20 2012-03-15 23:29:54 +08:00
usb_a9g20.dts ARM: at91: Calao USB A926x factorize common binding in usb_a9260_common 2012-04-20 23:17:11 +08:00
usb_a9260_common.dtsi ARM: at91: Calao USB A926x factorize common binding in usb_a9260_common 2012-04-20 23:17:11 +08:00
usb_a9260.dts ARM: at91: DT: add Calao USB A9260 DT support 2012-04-20 23:17:15 +08:00
usb_a9263.dts ARM: at91: DT: add Calao USB A9263 board support 2012-04-20 23:17:27 +08:00
versatile-ab.dts ARM: 7390/1: dts: versatile-pb/ab fix MMC IRQs 2012-04-23 15:46:15 +01:00
versatile-pb.dts ARM: 7390/1: dts: versatile-pb/ab fix MMC IRQs 2012-04-23 15:46:15 +01:00
vexpress-v2m-rs1.dtsi ARM: vexpress: Remove motherboard dependencies in the DTS files 2012-11-05 17:09:52 +00:00
vexpress-v2m.dtsi ARM: vexpress: Remove motherboard dependencies in the DTS files 2012-11-05 17:09:52 +00:00
vexpress-v2p-ca5s.dts ARM: vexpress: Remove motherboard dependencies in the DTS files 2012-11-05 17:09:52 +00:00
vexpress-v2p-ca9.dts ARM: vexpress: Remove motherboard dependencies in the DTS files 2012-11-05 17:09:52 +00:00
vexpress-v2p-ca15_a7.dts ARM: vexpress: Fix wdt interrupt in ca15{-tc1,_a7} dts 2013-01-29 18:20:28 +00:00
vexpress-v2p-ca15-tc1.dts ARM: vexpress: Fix wdt interrupt in ca15{-tc1,_a7} dts 2013-01-29 18:20:28 +00:00
vt8500-bv07.dts arm: vt8500: Add device tree files for VIA/Wondermedia SoC's 2012-09-21 19:23:54 +12:00
vt8500.dtsi serial: vt8500: UART uses gated clock rather than 24Mhz reference 2013-01-17 18:54:32 -08:00
wm8505-ref.dts arm: vt8500: Add device tree files for VIA/Wondermedia SoC's 2012-09-21 19:23:54 +12:00
wm8505.dtsi serial: vt8500: UART uses gated clock rather than 24Mhz reference 2013-01-17 18:54:32 -08:00
wm8650-mid.dts arm: vt8500: Add device tree files for VIA/Wondermedia SoC's 2012-09-21 19:23:54 +12:00
wm8650.dtsi serial: vt8500: UART uses gated clock rather than 24Mhz reference 2013-01-17 18:54:32 -08:00
wm8850-w70v2.dts dts: vt8500: Add initial dts support for WM8850 2013-01-21 23:20:08 -08:00
wm8850.dtsi dts: vt8500: Add initial dts support for WM8850 2013-01-21 23:20:08 -08:00
xenvm-4.2.dts arm: introduce a DTS for Xen unprivileged virtual machines 2012-09-24 16:40:52 +00:00
zynq-7000.dtsi serial: xilinx_uartps: Get clock rate info from dts 2013-01-21 13:56:46 -08:00
zynq-zc702.dts ARM: zynq: add clk binding support to the ttc 2012-11-14 16:10:42 +01:00