mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-18 16:44:27 +08:00
5f5ac460df
commitbb38919ec5
("PCI: imx6: Add support for i.MX6 PCIe controller") added a fault hook to this driver in the probe function. So it was only installed if needed. commitbde4a5a00e
("PCI: imx6: Allow probe deferral by reset GPIO") moved it from probe to driver init which installs the hook unconditionally as soon as the driver is compiled into a kernel. When this driver is compiled as a module, the hook is not registered until after the driver has been matched with a .compatible and loaded. commit415b6185c5
("PCI: imx6: Fix config read timeout handling") extended the fault handling code. commit2d8ed461db
("PCI: imx6: Add support for i.MX8MQ") added some protection for non-ARM architectures, but this does not protect non-i.MX ARM architectures. Since fault handlers can be triggered on any architecture for different reasons, there is no guarantee that they will be triggered only for the assumed situation, leading to improper error handling (i.MX6-specific imx6q_pcie_abort_handler) on foreign systems. I had seen strange L3 imprecise external abort messages several times on OMAP4 and OMAP5 devices and couldn't make sense of them until I realized they were related to this unused imx6q driver because I had CONFIG_PCI_IMX6=y. Note that CONFIG_PCI_IMX6=y is useful for kernel binaries that are designed to run on different ARM SoC and be differentiated only by device tree binaries. So turning off CONFIG_PCI_IMX6 is not a solution. Therefore we check the compatible in the init function before registering the fault handler. Link: https://lore.kernel.org/r/e1bcfc3078c82b53aa9b78077a89955abe4ea009.1678380991.git.hns@goldelico.com Fixes:bde4a5a00e
("PCI: imx6: Allow probe deferral by reset GPIO") Fixes:415b6185c5
("PCI: imx6: Fix config read timeout handling") Fixes:2d8ed461db
("PCI: imx6: Add support for i.MX8MQ") Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
1590 lines
41 KiB
C
1590 lines
41 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* PCIe host controller driver for Freescale i.MX6 SoCs
|
|
*
|
|
* Copyright (C) 2013 Kosagi
|
|
* https://www.kosagi.com
|
|
*
|
|
* Author: Sean Cross <xobs@kosagi.com>
|
|
*/
|
|
|
|
#include <linux/bitfield.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
|
|
#include <linux/mfd/syscon/imx7-iomuxc-gpr.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/resource.h>
|
|
#include <linux/signal.h>
|
|
#include <linux/types.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/reset.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/pm_domain.h>
|
|
#include <linux/pm_runtime.h>
|
|
|
|
#include "pcie-designware.h"
|
|
|
|
#define IMX8MQ_GPR_PCIE_REF_USE_PAD BIT(9)
|
|
#define IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN BIT(10)
|
|
#define IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE BIT(11)
|
|
#define IMX8MQ_GPR_PCIE_VREG_BYPASS BIT(12)
|
|
#define IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE GENMASK(11, 8)
|
|
#define IMX8MQ_PCIE2_BASE_ADDR 0x33c00000
|
|
|
|
#define to_imx6_pcie(x) dev_get_drvdata((x)->dev)
|
|
|
|
enum imx6_pcie_variants {
|
|
IMX6Q,
|
|
IMX6SX,
|
|
IMX6QP,
|
|
IMX7D,
|
|
IMX8MQ,
|
|
IMX8MM,
|
|
IMX8MP,
|
|
IMX8MQ_EP,
|
|
IMX8MM_EP,
|
|
IMX8MP_EP,
|
|
};
|
|
|
|
#define IMX6_PCIE_FLAG_IMX6_PHY BIT(0)
|
|
#define IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE BIT(1)
|
|
#define IMX6_PCIE_FLAG_SUPPORTS_SUSPEND BIT(2)
|
|
|
|
struct imx6_pcie_drvdata {
|
|
enum imx6_pcie_variants variant;
|
|
enum dw_pcie_device_mode mode;
|
|
u32 flags;
|
|
int dbi_length;
|
|
const char *gpr;
|
|
};
|
|
|
|
struct imx6_pcie {
|
|
struct dw_pcie *pci;
|
|
int reset_gpio;
|
|
bool gpio_active_high;
|
|
bool link_is_up;
|
|
struct clk *pcie_bus;
|
|
struct clk *pcie_phy;
|
|
struct clk *pcie_inbound_axi;
|
|
struct clk *pcie;
|
|
struct clk *pcie_aux;
|
|
struct regmap *iomuxc_gpr;
|
|
u32 controller_id;
|
|
struct reset_control *pciephy_reset;
|
|
struct reset_control *apps_reset;
|
|
struct reset_control *turnoff_reset;
|
|
u32 tx_deemph_gen1;
|
|
u32 tx_deemph_gen2_3p5db;
|
|
u32 tx_deemph_gen2_6db;
|
|
u32 tx_swing_full;
|
|
u32 tx_swing_low;
|
|
struct regulator *vpcie;
|
|
struct regulator *vph;
|
|
void __iomem *phy_base;
|
|
|
|
/* power domain for pcie */
|
|
struct device *pd_pcie;
|
|
/* power domain for pcie phy */
|
|
struct device *pd_pcie_phy;
|
|
struct phy *phy;
|
|
const struct imx6_pcie_drvdata *drvdata;
|
|
};
|
|
|
|
/* Parameters for the waiting for PCIe PHY PLL to lock on i.MX7 */
|
|
#define PHY_PLL_LOCK_WAIT_USLEEP_MAX 200
|
|
#define PHY_PLL_LOCK_WAIT_TIMEOUT (2000 * PHY_PLL_LOCK_WAIT_USLEEP_MAX)
|
|
|
|
/* PCIe Port Logic registers (memory-mapped) */
|
|
#define PL_OFFSET 0x700
|
|
|
|
#define PCIE_PHY_CTRL (PL_OFFSET + 0x114)
|
|
#define PCIE_PHY_CTRL_DATA(x) FIELD_PREP(GENMASK(15, 0), (x))
|
|
#define PCIE_PHY_CTRL_CAP_ADR BIT(16)
|
|
#define PCIE_PHY_CTRL_CAP_DAT BIT(17)
|
|
#define PCIE_PHY_CTRL_WR BIT(18)
|
|
#define PCIE_PHY_CTRL_RD BIT(19)
|
|
|
|
#define PCIE_PHY_STAT (PL_OFFSET + 0x110)
|
|
#define PCIE_PHY_STAT_ACK BIT(16)
|
|
|
|
/* PHY registers (not memory-mapped) */
|
|
#define PCIE_PHY_ATEOVRD 0x10
|
|
#define PCIE_PHY_ATEOVRD_EN BIT(2)
|
|
#define PCIE_PHY_ATEOVRD_REF_CLKDIV_SHIFT 0
|
|
#define PCIE_PHY_ATEOVRD_REF_CLKDIV_MASK 0x1
|
|
|
|
#define PCIE_PHY_MPLL_OVRD_IN_LO 0x11
|
|
#define PCIE_PHY_MPLL_MULTIPLIER_SHIFT 2
|
|
#define PCIE_PHY_MPLL_MULTIPLIER_MASK 0x7f
|
|
#define PCIE_PHY_MPLL_MULTIPLIER_OVRD BIT(9)
|
|
|
|
#define PCIE_PHY_RX_ASIC_OUT 0x100D
|
|
#define PCIE_PHY_RX_ASIC_OUT_VALID (1 << 0)
|
|
|
|
/* iMX7 PCIe PHY registers */
|
|
#define PCIE_PHY_CMN_REG4 0x14
|
|
/* These are probably the bits that *aren't* DCC_FB_EN */
|
|
#define PCIE_PHY_CMN_REG4_DCC_FB_EN 0x29
|
|
|
|
#define PCIE_PHY_CMN_REG15 0x54
|
|
#define PCIE_PHY_CMN_REG15_DLY_4 BIT(2)
|
|
#define PCIE_PHY_CMN_REG15_PLL_PD BIT(5)
|
|
#define PCIE_PHY_CMN_REG15_OVRD_PLL_PD BIT(7)
|
|
|
|
#define PCIE_PHY_CMN_REG24 0x90
|
|
#define PCIE_PHY_CMN_REG24_RX_EQ BIT(6)
|
|
#define PCIE_PHY_CMN_REG24_RX_EQ_SEL BIT(3)
|
|
|
|
#define PCIE_PHY_CMN_REG26 0x98
|
|
#define PCIE_PHY_CMN_REG26_ATT_MODE 0xBC
|
|
|
|
#define PHY_RX_OVRD_IN_LO 0x1005
|
|
#define PHY_RX_OVRD_IN_LO_RX_DATA_EN BIT(5)
|
|
#define PHY_RX_OVRD_IN_LO_RX_PLL_EN BIT(3)
|
|
|
|
static unsigned int imx6_pcie_grp_offset(const struct imx6_pcie *imx6_pcie)
|
|
{
|
|
WARN_ON(imx6_pcie->drvdata->variant != IMX8MQ &&
|
|
imx6_pcie->drvdata->variant != IMX8MQ_EP &&
|
|
imx6_pcie->drvdata->variant != IMX8MM &&
|
|
imx6_pcie->drvdata->variant != IMX8MM_EP &&
|
|
imx6_pcie->drvdata->variant != IMX8MP &&
|
|
imx6_pcie->drvdata->variant != IMX8MP_EP);
|
|
return imx6_pcie->controller_id == 1 ? IOMUXC_GPR16 : IOMUXC_GPR14;
|
|
}
|
|
|
|
static void imx6_pcie_configure_type(struct imx6_pcie *imx6_pcie)
|
|
{
|
|
unsigned int mask, val, mode;
|
|
|
|
if (imx6_pcie->drvdata->mode == DW_PCIE_EP_TYPE)
|
|
mode = PCI_EXP_TYPE_ENDPOINT;
|
|
else
|
|
mode = PCI_EXP_TYPE_ROOT_PORT;
|
|
|
|
switch (imx6_pcie->drvdata->variant) {
|
|
case IMX8MQ:
|
|
case IMX8MQ_EP:
|
|
if (imx6_pcie->controller_id == 1) {
|
|
mask = IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE;
|
|
val = FIELD_PREP(IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE,
|
|
mode);
|
|
} else {
|
|
mask = IMX6Q_GPR12_DEVICE_TYPE;
|
|
val = FIELD_PREP(IMX6Q_GPR12_DEVICE_TYPE, mode);
|
|
}
|
|
break;
|
|
default:
|
|
mask = IMX6Q_GPR12_DEVICE_TYPE;
|
|
val = FIELD_PREP(IMX6Q_GPR12_DEVICE_TYPE, mode);
|
|
break;
|
|
}
|
|
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, mask, val);
|
|
}
|
|
|
|
static int pcie_phy_poll_ack(struct imx6_pcie *imx6_pcie, bool exp_val)
|
|
{
|
|
struct dw_pcie *pci = imx6_pcie->pci;
|
|
bool val;
|
|
u32 max_iterations = 10;
|
|
u32 wait_counter = 0;
|
|
|
|
do {
|
|
val = dw_pcie_readl_dbi(pci, PCIE_PHY_STAT) &
|
|
PCIE_PHY_STAT_ACK;
|
|
wait_counter++;
|
|
|
|
if (val == exp_val)
|
|
return 0;
|
|
|
|
udelay(1);
|
|
} while (wait_counter < max_iterations);
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int pcie_phy_wait_ack(struct imx6_pcie *imx6_pcie, int addr)
|
|
{
|
|
struct dw_pcie *pci = imx6_pcie->pci;
|
|
u32 val;
|
|
int ret;
|
|
|
|
val = PCIE_PHY_CTRL_DATA(addr);
|
|
dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, val);
|
|
|
|
val |= PCIE_PHY_CTRL_CAP_ADR;
|
|
dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, val);
|
|
|
|
ret = pcie_phy_poll_ack(imx6_pcie, true);
|
|
if (ret)
|
|
return ret;
|
|
|
|
val = PCIE_PHY_CTRL_DATA(addr);
|
|
dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, val);
|
|
|
|
return pcie_phy_poll_ack(imx6_pcie, false);
|
|
}
|
|
|
|
/* Read from the 16-bit PCIe PHY control registers (not memory-mapped) */
|
|
static int pcie_phy_read(struct imx6_pcie *imx6_pcie, int addr, u16 *data)
|
|
{
|
|
struct dw_pcie *pci = imx6_pcie->pci;
|
|
u32 phy_ctl;
|
|
int ret;
|
|
|
|
ret = pcie_phy_wait_ack(imx6_pcie, addr);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* assert Read signal */
|
|
phy_ctl = PCIE_PHY_CTRL_RD;
|
|
dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, phy_ctl);
|
|
|
|
ret = pcie_phy_poll_ack(imx6_pcie, true);
|
|
if (ret)
|
|
return ret;
|
|
|
|
*data = dw_pcie_readl_dbi(pci, PCIE_PHY_STAT);
|
|
|
|
/* deassert Read signal */
|
|
dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, 0x00);
|
|
|
|
return pcie_phy_poll_ack(imx6_pcie, false);
|
|
}
|
|
|
|
static int pcie_phy_write(struct imx6_pcie *imx6_pcie, int addr, u16 data)
|
|
{
|
|
struct dw_pcie *pci = imx6_pcie->pci;
|
|
u32 var;
|
|
int ret;
|
|
|
|
/* write addr */
|
|
/* cap addr */
|
|
ret = pcie_phy_wait_ack(imx6_pcie, addr);
|
|
if (ret)
|
|
return ret;
|
|
|
|
var = PCIE_PHY_CTRL_DATA(data);
|
|
dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, var);
|
|
|
|
/* capture data */
|
|
var |= PCIE_PHY_CTRL_CAP_DAT;
|
|
dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, var);
|
|
|
|
ret = pcie_phy_poll_ack(imx6_pcie, true);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* deassert cap data */
|
|
var = PCIE_PHY_CTRL_DATA(data);
|
|
dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, var);
|
|
|
|
/* wait for ack de-assertion */
|
|
ret = pcie_phy_poll_ack(imx6_pcie, false);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* assert wr signal */
|
|
var = PCIE_PHY_CTRL_WR;
|
|
dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, var);
|
|
|
|
/* wait for ack */
|
|
ret = pcie_phy_poll_ack(imx6_pcie, true);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* deassert wr signal */
|
|
var = PCIE_PHY_CTRL_DATA(data);
|
|
dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, var);
|
|
|
|
/* wait for ack de-assertion */
|
|
ret = pcie_phy_poll_ack(imx6_pcie, false);
|
|
if (ret)
|
|
return ret;
|
|
|
|
dw_pcie_writel_dbi(pci, PCIE_PHY_CTRL, 0x0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie)
|
|
{
|
|
switch (imx6_pcie->drvdata->variant) {
|
|
case IMX8MM:
|
|
case IMX8MM_EP:
|
|
case IMX8MP:
|
|
case IMX8MP_EP:
|
|
/*
|
|
* The PHY initialization had been done in the PHY
|
|
* driver, break here directly.
|
|
*/
|
|
break;
|
|
case IMX8MQ:
|
|
case IMX8MQ_EP:
|
|
/*
|
|
* TODO: Currently this code assumes external
|
|
* oscillator is being used
|
|
*/
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr,
|
|
imx6_pcie_grp_offset(imx6_pcie),
|
|
IMX8MQ_GPR_PCIE_REF_USE_PAD,
|
|
IMX8MQ_GPR_PCIE_REF_USE_PAD);
|
|
/*
|
|
* Regarding the datasheet, the PCIE_VPH is suggested
|
|
* to be 1.8V. If the PCIE_VPH is supplied by 3.3V, the
|
|
* VREG_BYPASS should be cleared to zero.
|
|
*/
|
|
if (imx6_pcie->vph &&
|
|
regulator_get_voltage(imx6_pcie->vph) > 3000000)
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr,
|
|
imx6_pcie_grp_offset(imx6_pcie),
|
|
IMX8MQ_GPR_PCIE_VREG_BYPASS,
|
|
0);
|
|
break;
|
|
case IMX7D:
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
|
IMX7D_GPR12_PCIE_PHY_REFCLK_SEL, 0);
|
|
break;
|
|
case IMX6SX:
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
|
IMX6SX_GPR12_PCIE_RX_EQ_MASK,
|
|
IMX6SX_GPR12_PCIE_RX_EQ_2);
|
|
fallthrough;
|
|
default:
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
|
IMX6Q_GPR12_PCIE_CTL_2, 0 << 10);
|
|
|
|
/* configure constant input signal to the pcie ctrl and phy */
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
|
IMX6Q_GPR12_LOS_LEVEL, 9 << 4);
|
|
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
|
|
IMX6Q_GPR8_TX_DEEMPH_GEN1,
|
|
imx6_pcie->tx_deemph_gen1 << 0);
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
|
|
IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB,
|
|
imx6_pcie->tx_deemph_gen2_3p5db << 6);
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
|
|
IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB,
|
|
imx6_pcie->tx_deemph_gen2_6db << 12);
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
|
|
IMX6Q_GPR8_TX_SWING_FULL,
|
|
imx6_pcie->tx_swing_full << 18);
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
|
|
IMX6Q_GPR8_TX_SWING_LOW,
|
|
imx6_pcie->tx_swing_low << 25);
|
|
break;
|
|
}
|
|
|
|
imx6_pcie_configure_type(imx6_pcie);
|
|
}
|
|
|
|
static void imx7d_pcie_wait_for_phy_pll_lock(struct imx6_pcie *imx6_pcie)
|
|
{
|
|
u32 val;
|
|
struct device *dev = imx6_pcie->pci->dev;
|
|
|
|
if (regmap_read_poll_timeout(imx6_pcie->iomuxc_gpr,
|
|
IOMUXC_GPR22, val,
|
|
val & IMX7D_GPR22_PCIE_PHY_PLL_LOCKED,
|
|
PHY_PLL_LOCK_WAIT_USLEEP_MAX,
|
|
PHY_PLL_LOCK_WAIT_TIMEOUT))
|
|
dev_err(dev, "PCIe PLL lock timeout\n");
|
|
}
|
|
|
|
static int imx6_setup_phy_mpll(struct imx6_pcie *imx6_pcie)
|
|
{
|
|
unsigned long phy_rate = clk_get_rate(imx6_pcie->pcie_phy);
|
|
int mult, div;
|
|
u16 val;
|
|
|
|
if (!(imx6_pcie->drvdata->flags & IMX6_PCIE_FLAG_IMX6_PHY))
|
|
return 0;
|
|
|
|
switch (phy_rate) {
|
|
case 125000000:
|
|
/*
|
|
* The default settings of the MPLL are for a 125MHz input
|
|
* clock, so no need to reconfigure anything in that case.
|
|
*/
|
|
return 0;
|
|
case 100000000:
|
|
mult = 25;
|
|
div = 0;
|
|
break;
|
|
case 200000000:
|
|
mult = 25;
|
|
div = 1;
|
|
break;
|
|
default:
|
|
dev_err(imx6_pcie->pci->dev,
|
|
"Unsupported PHY reference clock rate %lu\n", phy_rate);
|
|
return -EINVAL;
|
|
}
|
|
|
|
pcie_phy_read(imx6_pcie, PCIE_PHY_MPLL_OVRD_IN_LO, &val);
|
|
val &= ~(PCIE_PHY_MPLL_MULTIPLIER_MASK <<
|
|
PCIE_PHY_MPLL_MULTIPLIER_SHIFT);
|
|
val |= mult << PCIE_PHY_MPLL_MULTIPLIER_SHIFT;
|
|
val |= PCIE_PHY_MPLL_MULTIPLIER_OVRD;
|
|
pcie_phy_write(imx6_pcie, PCIE_PHY_MPLL_OVRD_IN_LO, val);
|
|
|
|
pcie_phy_read(imx6_pcie, PCIE_PHY_ATEOVRD, &val);
|
|
val &= ~(PCIE_PHY_ATEOVRD_REF_CLKDIV_MASK <<
|
|
PCIE_PHY_ATEOVRD_REF_CLKDIV_SHIFT);
|
|
val |= div << PCIE_PHY_ATEOVRD_REF_CLKDIV_SHIFT;
|
|
val |= PCIE_PHY_ATEOVRD_EN;
|
|
pcie_phy_write(imx6_pcie, PCIE_PHY_ATEOVRD, val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void imx6_pcie_reset_phy(struct imx6_pcie *imx6_pcie)
|
|
{
|
|
u16 tmp;
|
|
|
|
if (!(imx6_pcie->drvdata->flags & IMX6_PCIE_FLAG_IMX6_PHY))
|
|
return;
|
|
|
|
pcie_phy_read(imx6_pcie, PHY_RX_OVRD_IN_LO, &tmp);
|
|
tmp |= (PHY_RX_OVRD_IN_LO_RX_DATA_EN |
|
|
PHY_RX_OVRD_IN_LO_RX_PLL_EN);
|
|
pcie_phy_write(imx6_pcie, PHY_RX_OVRD_IN_LO, tmp);
|
|
|
|
usleep_range(2000, 3000);
|
|
|
|
pcie_phy_read(imx6_pcie, PHY_RX_OVRD_IN_LO, &tmp);
|
|
tmp &= ~(PHY_RX_OVRD_IN_LO_RX_DATA_EN |
|
|
PHY_RX_OVRD_IN_LO_RX_PLL_EN);
|
|
pcie_phy_write(imx6_pcie, PHY_RX_OVRD_IN_LO, tmp);
|
|
}
|
|
|
|
#ifdef CONFIG_ARM
|
|
/* Added for PCI abort handling */
|
|
static int imx6q_pcie_abort_handler(unsigned long addr,
|
|
unsigned int fsr, struct pt_regs *regs)
|
|
{
|
|
unsigned long pc = instruction_pointer(regs);
|
|
unsigned long instr = *(unsigned long *)pc;
|
|
int reg = (instr >> 12) & 15;
|
|
|
|
/*
|
|
* If the instruction being executed was a read,
|
|
* make it look like it read all-ones.
|
|
*/
|
|
if ((instr & 0x0c100000) == 0x04100000) {
|
|
unsigned long val;
|
|
|
|
if (instr & 0x00400000)
|
|
val = 255;
|
|
else
|
|
val = -1;
|
|
|
|
regs->uregs[reg] = val;
|
|
regs->ARM_pc += 4;
|
|
return 0;
|
|
}
|
|
|
|
if ((instr & 0x0e100090) == 0x00100090) {
|
|
regs->uregs[reg] = -1;
|
|
regs->ARM_pc += 4;
|
|
return 0;
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
#endif
|
|
|
|
static int imx6_pcie_attach_pd(struct device *dev)
|
|
{
|
|
struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
|
|
struct device_link *link;
|
|
|
|
/* Do nothing when in a single power domain */
|
|
if (dev->pm_domain)
|
|
return 0;
|
|
|
|
imx6_pcie->pd_pcie = dev_pm_domain_attach_by_name(dev, "pcie");
|
|
if (IS_ERR(imx6_pcie->pd_pcie))
|
|
return PTR_ERR(imx6_pcie->pd_pcie);
|
|
/* Do nothing when power domain missing */
|
|
if (!imx6_pcie->pd_pcie)
|
|
return 0;
|
|
link = device_link_add(dev, imx6_pcie->pd_pcie,
|
|
DL_FLAG_STATELESS |
|
|
DL_FLAG_PM_RUNTIME |
|
|
DL_FLAG_RPM_ACTIVE);
|
|
if (!link) {
|
|
dev_err(dev, "Failed to add device_link to pcie pd.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
imx6_pcie->pd_pcie_phy = dev_pm_domain_attach_by_name(dev, "pcie_phy");
|
|
if (IS_ERR(imx6_pcie->pd_pcie_phy))
|
|
return PTR_ERR(imx6_pcie->pd_pcie_phy);
|
|
|
|
link = device_link_add(dev, imx6_pcie->pd_pcie_phy,
|
|
DL_FLAG_STATELESS |
|
|
DL_FLAG_PM_RUNTIME |
|
|
DL_FLAG_RPM_ACTIVE);
|
|
if (!link) {
|
|
dev_err(dev, "Failed to add device_link to pcie_phy pd.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
|
|
{
|
|
struct dw_pcie *pci = imx6_pcie->pci;
|
|
struct device *dev = pci->dev;
|
|
unsigned int offset;
|
|
int ret = 0;
|
|
|
|
switch (imx6_pcie->drvdata->variant) {
|
|
case IMX6SX:
|
|
ret = clk_prepare_enable(imx6_pcie->pcie_inbound_axi);
|
|
if (ret) {
|
|
dev_err(dev, "unable to enable pcie_axi clock\n");
|
|
break;
|
|
}
|
|
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
|
IMX6SX_GPR12_PCIE_TEST_POWERDOWN, 0);
|
|
break;
|
|
case IMX6QP:
|
|
case IMX6Q:
|
|
/* power up core phy and enable ref clock */
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
|
|
IMX6Q_GPR1_PCIE_TEST_PD, 0 << 18);
|
|
/*
|
|
* the async reset input need ref clock to sync internally,
|
|
* when the ref clock comes after reset, internal synced
|
|
* reset time is too short, cannot meet the requirement.
|
|
* add one ~10us delay here.
|
|
*/
|
|
usleep_range(10, 100);
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
|
|
IMX6Q_GPR1_PCIE_REF_CLK_EN, 1 << 16);
|
|
break;
|
|
case IMX7D:
|
|
break;
|
|
case IMX8MM:
|
|
case IMX8MM_EP:
|
|
case IMX8MQ:
|
|
case IMX8MQ_EP:
|
|
case IMX8MP:
|
|
case IMX8MP_EP:
|
|
ret = clk_prepare_enable(imx6_pcie->pcie_aux);
|
|
if (ret) {
|
|
dev_err(dev, "unable to enable pcie_aux clock\n");
|
|
break;
|
|
}
|
|
|
|
offset = imx6_pcie_grp_offset(imx6_pcie);
|
|
/*
|
|
* Set the over ride low and enabled
|
|
* make sure that REF_CLK is turned on.
|
|
*/
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, offset,
|
|
IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE,
|
|
0);
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, offset,
|
|
IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN,
|
|
IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN);
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void imx6_pcie_disable_ref_clk(struct imx6_pcie *imx6_pcie)
|
|
{
|
|
switch (imx6_pcie->drvdata->variant) {
|
|
case IMX6SX:
|
|
clk_disable_unprepare(imx6_pcie->pcie_inbound_axi);
|
|
break;
|
|
case IMX6QP:
|
|
case IMX6Q:
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
|
|
IMX6Q_GPR1_PCIE_REF_CLK_EN, 0);
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
|
|
IMX6Q_GPR1_PCIE_TEST_PD,
|
|
IMX6Q_GPR1_PCIE_TEST_PD);
|
|
break;
|
|
case IMX7D:
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
|
IMX7D_GPR12_PCIE_PHY_REFCLK_SEL,
|
|
IMX7D_GPR12_PCIE_PHY_REFCLK_SEL);
|
|
break;
|
|
case IMX8MM:
|
|
case IMX8MM_EP:
|
|
case IMX8MQ:
|
|
case IMX8MQ_EP:
|
|
case IMX8MP:
|
|
case IMX8MP_EP:
|
|
clk_disable_unprepare(imx6_pcie->pcie_aux);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int imx6_pcie_clk_enable(struct imx6_pcie *imx6_pcie)
|
|
{
|
|
struct dw_pcie *pci = imx6_pcie->pci;
|
|
struct device *dev = pci->dev;
|
|
int ret;
|
|
|
|
ret = clk_prepare_enable(imx6_pcie->pcie_phy);
|
|
if (ret) {
|
|
dev_err(dev, "unable to enable pcie_phy clock\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = clk_prepare_enable(imx6_pcie->pcie_bus);
|
|
if (ret) {
|
|
dev_err(dev, "unable to enable pcie_bus clock\n");
|
|
goto err_pcie_bus;
|
|
}
|
|
|
|
ret = clk_prepare_enable(imx6_pcie->pcie);
|
|
if (ret) {
|
|
dev_err(dev, "unable to enable pcie clock\n");
|
|
goto err_pcie;
|
|
}
|
|
|
|
ret = imx6_pcie_enable_ref_clk(imx6_pcie);
|
|
if (ret) {
|
|
dev_err(dev, "unable to enable pcie ref clock\n");
|
|
goto err_ref_clk;
|
|
}
|
|
|
|
/* allow the clocks to stabilize */
|
|
usleep_range(200, 500);
|
|
return 0;
|
|
|
|
err_ref_clk:
|
|
clk_disable_unprepare(imx6_pcie->pcie);
|
|
err_pcie:
|
|
clk_disable_unprepare(imx6_pcie->pcie_bus);
|
|
err_pcie_bus:
|
|
clk_disable_unprepare(imx6_pcie->pcie_phy);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie)
|
|
{
|
|
imx6_pcie_disable_ref_clk(imx6_pcie);
|
|
clk_disable_unprepare(imx6_pcie->pcie);
|
|
clk_disable_unprepare(imx6_pcie->pcie_bus);
|
|
clk_disable_unprepare(imx6_pcie->pcie_phy);
|
|
}
|
|
|
|
static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
|
|
{
|
|
switch (imx6_pcie->drvdata->variant) {
|
|
case IMX7D:
|
|
case IMX8MQ:
|
|
case IMX8MQ_EP:
|
|
reset_control_assert(imx6_pcie->pciephy_reset);
|
|
fallthrough;
|
|
case IMX8MM:
|
|
case IMX8MM_EP:
|
|
case IMX8MP:
|
|
case IMX8MP_EP:
|
|
reset_control_assert(imx6_pcie->apps_reset);
|
|
break;
|
|
case IMX6SX:
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
|
IMX6SX_GPR12_PCIE_TEST_POWERDOWN,
|
|
IMX6SX_GPR12_PCIE_TEST_POWERDOWN);
|
|
/* Force PCIe PHY reset */
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR5,
|
|
IMX6SX_GPR5_PCIE_BTNRST_RESET,
|
|
IMX6SX_GPR5_PCIE_BTNRST_RESET);
|
|
break;
|
|
case IMX6QP:
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
|
|
IMX6Q_GPR1_PCIE_SW_RST,
|
|
IMX6Q_GPR1_PCIE_SW_RST);
|
|
break;
|
|
case IMX6Q:
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
|
|
IMX6Q_GPR1_PCIE_TEST_PD, 1 << 18);
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
|
|
IMX6Q_GPR1_PCIE_REF_CLK_EN, 0 << 16);
|
|
break;
|
|
}
|
|
|
|
/* Some boards don't have PCIe reset GPIO. */
|
|
if (gpio_is_valid(imx6_pcie->reset_gpio))
|
|
gpio_set_value_cansleep(imx6_pcie->reset_gpio,
|
|
imx6_pcie->gpio_active_high);
|
|
}
|
|
|
|
static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
|
|
{
|
|
struct dw_pcie *pci = imx6_pcie->pci;
|
|
struct device *dev = pci->dev;
|
|
|
|
switch (imx6_pcie->drvdata->variant) {
|
|
case IMX8MQ:
|
|
case IMX8MQ_EP:
|
|
reset_control_deassert(imx6_pcie->pciephy_reset);
|
|
break;
|
|
case IMX7D:
|
|
reset_control_deassert(imx6_pcie->pciephy_reset);
|
|
|
|
/* Workaround for ERR010728, failure of PCI-e PLL VCO to
|
|
* oscillate, especially when cold. This turns off "Duty-cycle
|
|
* Corrector" and other mysterious undocumented things.
|
|
*/
|
|
if (likely(imx6_pcie->phy_base)) {
|
|
/* De-assert DCC_FB_EN */
|
|
writel(PCIE_PHY_CMN_REG4_DCC_FB_EN,
|
|
imx6_pcie->phy_base + PCIE_PHY_CMN_REG4);
|
|
/* Assert RX_EQS and RX_EQS_SEL */
|
|
writel(PCIE_PHY_CMN_REG24_RX_EQ_SEL
|
|
| PCIE_PHY_CMN_REG24_RX_EQ,
|
|
imx6_pcie->phy_base + PCIE_PHY_CMN_REG24);
|
|
/* Assert ATT_MODE */
|
|
writel(PCIE_PHY_CMN_REG26_ATT_MODE,
|
|
imx6_pcie->phy_base + PCIE_PHY_CMN_REG26);
|
|
} else {
|
|
dev_warn(dev, "Unable to apply ERR010728 workaround. DT missing fsl,imx7d-pcie-phy phandle ?\n");
|
|
}
|
|
|
|
imx7d_pcie_wait_for_phy_pll_lock(imx6_pcie);
|
|
break;
|
|
case IMX6SX:
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR5,
|
|
IMX6SX_GPR5_PCIE_BTNRST_RESET, 0);
|
|
break;
|
|
case IMX6QP:
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
|
|
IMX6Q_GPR1_PCIE_SW_RST, 0);
|
|
|
|
usleep_range(200, 500);
|
|
break;
|
|
case IMX6Q: /* Nothing to do */
|
|
case IMX8MM:
|
|
case IMX8MM_EP:
|
|
case IMX8MP:
|
|
case IMX8MP_EP:
|
|
break;
|
|
}
|
|
|
|
/* Some boards don't have PCIe reset GPIO. */
|
|
if (gpio_is_valid(imx6_pcie->reset_gpio)) {
|
|
msleep(100);
|
|
gpio_set_value_cansleep(imx6_pcie->reset_gpio,
|
|
!imx6_pcie->gpio_active_high);
|
|
/* Wait for 100ms after PERST# deassertion (PCIe r5.0, 6.6.1) */
|
|
msleep(100);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int imx6_pcie_wait_for_speed_change(struct imx6_pcie *imx6_pcie)
|
|
{
|
|
struct dw_pcie *pci = imx6_pcie->pci;
|
|
struct device *dev = pci->dev;
|
|
u32 tmp;
|
|
unsigned int retries;
|
|
|
|
for (retries = 0; retries < 200; retries++) {
|
|
tmp = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL);
|
|
/* Test if the speed change finished. */
|
|
if (!(tmp & PORT_LOGIC_SPEED_CHANGE))
|
|
return 0;
|
|
usleep_range(100, 1000);
|
|
}
|
|
|
|
dev_err(dev, "Speed change timeout\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static void imx6_pcie_ltssm_enable(struct device *dev)
|
|
{
|
|
struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
|
|
|
|
switch (imx6_pcie->drvdata->variant) {
|
|
case IMX6Q:
|
|
case IMX6SX:
|
|
case IMX6QP:
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
|
IMX6Q_GPR12_PCIE_CTL_2,
|
|
IMX6Q_GPR12_PCIE_CTL_2);
|
|
break;
|
|
case IMX7D:
|
|
case IMX8MQ:
|
|
case IMX8MQ_EP:
|
|
case IMX8MM:
|
|
case IMX8MM_EP:
|
|
case IMX8MP:
|
|
case IMX8MP_EP:
|
|
reset_control_deassert(imx6_pcie->apps_reset);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void imx6_pcie_ltssm_disable(struct device *dev)
|
|
{
|
|
struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
|
|
|
|
switch (imx6_pcie->drvdata->variant) {
|
|
case IMX6Q:
|
|
case IMX6SX:
|
|
case IMX6QP:
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
|
IMX6Q_GPR12_PCIE_CTL_2, 0);
|
|
break;
|
|
case IMX7D:
|
|
case IMX8MQ:
|
|
case IMX8MQ_EP:
|
|
case IMX8MM:
|
|
case IMX8MM_EP:
|
|
case IMX8MP:
|
|
case IMX8MP_EP:
|
|
reset_control_assert(imx6_pcie->apps_reset);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int imx6_pcie_start_link(struct dw_pcie *pci)
|
|
{
|
|
struct imx6_pcie *imx6_pcie = to_imx6_pcie(pci);
|
|
struct device *dev = pci->dev;
|
|
u8 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
|
|
u32 tmp;
|
|
int ret;
|
|
|
|
/*
|
|
* Force Gen1 operation when starting the link. In case the link is
|
|
* started in Gen2 mode, there is a possibility the devices on the
|
|
* bus will not be detected at all. This happens with PCIe switches.
|
|
*/
|
|
dw_pcie_dbi_ro_wr_en(pci);
|
|
tmp = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCAP);
|
|
tmp &= ~PCI_EXP_LNKCAP_SLS;
|
|
tmp |= PCI_EXP_LNKCAP_SLS_2_5GB;
|
|
dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCAP, tmp);
|
|
dw_pcie_dbi_ro_wr_dis(pci);
|
|
|
|
/* Start LTSSM. */
|
|
imx6_pcie_ltssm_enable(dev);
|
|
|
|
ret = dw_pcie_wait_for_link(pci);
|
|
if (ret)
|
|
goto err_reset_phy;
|
|
|
|
if (pci->link_gen > 1) {
|
|
/* Allow faster modes after the link is up */
|
|
dw_pcie_dbi_ro_wr_en(pci);
|
|
tmp = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCAP);
|
|
tmp &= ~PCI_EXP_LNKCAP_SLS;
|
|
tmp |= pci->link_gen;
|
|
dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCAP, tmp);
|
|
|
|
/*
|
|
* Start Directed Speed Change so the best possible
|
|
* speed both link partners support can be negotiated.
|
|
*/
|
|
tmp = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL);
|
|
tmp |= PORT_LOGIC_SPEED_CHANGE;
|
|
dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, tmp);
|
|
dw_pcie_dbi_ro_wr_dis(pci);
|
|
|
|
if (imx6_pcie->drvdata->flags &
|
|
IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE) {
|
|
/*
|
|
* On i.MX7, DIRECT_SPEED_CHANGE behaves differently
|
|
* from i.MX6 family when no link speed transition
|
|
* occurs and we go Gen1 -> yep, Gen1. The difference
|
|
* is that, in such case, it will not be cleared by HW
|
|
* which will cause the following code to report false
|
|
* failure.
|
|
*/
|
|
|
|
ret = imx6_pcie_wait_for_speed_change(imx6_pcie);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to bring link up!\n");
|
|
goto err_reset_phy;
|
|
}
|
|
}
|
|
|
|
/* Make sure link training is finished as well! */
|
|
ret = dw_pcie_wait_for_link(pci);
|
|
if (ret)
|
|
goto err_reset_phy;
|
|
} else {
|
|
dev_info(dev, "Link: Only Gen1 is enabled\n");
|
|
}
|
|
|
|
imx6_pcie->link_is_up = true;
|
|
tmp = dw_pcie_readw_dbi(pci, offset + PCI_EXP_LNKSTA);
|
|
dev_info(dev, "Link up, Gen%i\n", tmp & PCI_EXP_LNKSTA_CLS);
|
|
return 0;
|
|
|
|
err_reset_phy:
|
|
imx6_pcie->link_is_up = false;
|
|
dev_dbg(dev, "PHY DEBUG_R0=0x%08x DEBUG_R1=0x%08x\n",
|
|
dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG0),
|
|
dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG1));
|
|
imx6_pcie_reset_phy(imx6_pcie);
|
|
return 0;
|
|
}
|
|
|
|
static void imx6_pcie_stop_link(struct dw_pcie *pci)
|
|
{
|
|
struct device *dev = pci->dev;
|
|
|
|
/* Turn off PCIe LTSSM */
|
|
imx6_pcie_ltssm_disable(dev);
|
|
}
|
|
|
|
static int imx6_pcie_host_init(struct dw_pcie_rp *pp)
|
|
{
|
|
struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
|
|
struct device *dev = pci->dev;
|
|
struct imx6_pcie *imx6_pcie = to_imx6_pcie(pci);
|
|
int ret;
|
|
|
|
if (imx6_pcie->vpcie) {
|
|
ret = regulator_enable(imx6_pcie->vpcie);
|
|
if (ret) {
|
|
dev_err(dev, "failed to enable vpcie regulator: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
imx6_pcie_assert_core_reset(imx6_pcie);
|
|
imx6_pcie_init_phy(imx6_pcie);
|
|
|
|
ret = imx6_pcie_clk_enable(imx6_pcie);
|
|
if (ret) {
|
|
dev_err(dev, "unable to enable pcie clocks: %d\n", ret);
|
|
goto err_reg_disable;
|
|
}
|
|
|
|
if (imx6_pcie->phy) {
|
|
ret = phy_init(imx6_pcie->phy);
|
|
if (ret) {
|
|
dev_err(dev, "pcie PHY power up failed\n");
|
|
goto err_clk_disable;
|
|
}
|
|
}
|
|
|
|
if (imx6_pcie->phy) {
|
|
ret = phy_power_on(imx6_pcie->phy);
|
|
if (ret) {
|
|
dev_err(dev, "waiting for PHY ready timeout!\n");
|
|
goto err_phy_off;
|
|
}
|
|
}
|
|
|
|
ret = imx6_pcie_deassert_core_reset(imx6_pcie);
|
|
if (ret < 0) {
|
|
dev_err(dev, "pcie deassert core reset failed: %d\n", ret);
|
|
goto err_phy_off;
|
|
}
|
|
|
|
imx6_setup_phy_mpll(imx6_pcie);
|
|
|
|
return 0;
|
|
|
|
err_phy_off:
|
|
if (imx6_pcie->phy)
|
|
phy_exit(imx6_pcie->phy);
|
|
err_clk_disable:
|
|
imx6_pcie_clk_disable(imx6_pcie);
|
|
err_reg_disable:
|
|
if (imx6_pcie->vpcie)
|
|
regulator_disable(imx6_pcie->vpcie);
|
|
return ret;
|
|
}
|
|
|
|
static void imx6_pcie_host_exit(struct dw_pcie_rp *pp)
|
|
{
|
|
struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
|
|
struct imx6_pcie *imx6_pcie = to_imx6_pcie(pci);
|
|
|
|
if (imx6_pcie->phy) {
|
|
if (phy_power_off(imx6_pcie->phy))
|
|
dev_err(pci->dev, "unable to power off PHY\n");
|
|
phy_exit(imx6_pcie->phy);
|
|
}
|
|
imx6_pcie_clk_disable(imx6_pcie);
|
|
|
|
if (imx6_pcie->vpcie)
|
|
regulator_disable(imx6_pcie->vpcie);
|
|
}
|
|
|
|
static const struct dw_pcie_host_ops imx6_pcie_host_ops = {
|
|
.host_init = imx6_pcie_host_init,
|
|
};
|
|
|
|
static const struct dw_pcie_ops dw_pcie_ops = {
|
|
.start_link = imx6_pcie_start_link,
|
|
.stop_link = imx6_pcie_stop_link,
|
|
};
|
|
|
|
static void imx6_pcie_ep_init(struct dw_pcie_ep *ep)
|
|
{
|
|
enum pci_barno bar;
|
|
struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
|
|
|
|
for (bar = BAR_0; bar <= BAR_5; bar++)
|
|
dw_pcie_ep_reset_bar(pci, bar);
|
|
}
|
|
|
|
static int imx6_pcie_ep_raise_irq(struct dw_pcie_ep *ep, u8 func_no,
|
|
enum pci_epc_irq_type type,
|
|
u16 interrupt_num)
|
|
{
|
|
struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
|
|
|
|
switch (type) {
|
|
case PCI_EPC_IRQ_LEGACY:
|
|
return dw_pcie_ep_raise_legacy_irq(ep, func_no);
|
|
case PCI_EPC_IRQ_MSI:
|
|
return dw_pcie_ep_raise_msi_irq(ep, func_no, interrupt_num);
|
|
case PCI_EPC_IRQ_MSIX:
|
|
return dw_pcie_ep_raise_msix_irq(ep, func_no, interrupt_num);
|
|
default:
|
|
dev_err(pci->dev, "UNKNOWN IRQ type\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct pci_epc_features imx8m_pcie_epc_features = {
|
|
.linkup_notifier = false,
|
|
.msi_capable = true,
|
|
.msix_capable = false,
|
|
.reserved_bar = 1 << BAR_1 | 1 << BAR_3,
|
|
.align = SZ_64K,
|
|
};
|
|
|
|
static const struct pci_epc_features*
|
|
imx6_pcie_ep_get_features(struct dw_pcie_ep *ep)
|
|
{
|
|
return &imx8m_pcie_epc_features;
|
|
}
|
|
|
|
static const struct dw_pcie_ep_ops pcie_ep_ops = {
|
|
.ep_init = imx6_pcie_ep_init,
|
|
.raise_irq = imx6_pcie_ep_raise_irq,
|
|
.get_features = imx6_pcie_ep_get_features,
|
|
};
|
|
|
|
static int imx6_add_pcie_ep(struct imx6_pcie *imx6_pcie,
|
|
struct platform_device *pdev)
|
|
{
|
|
int ret;
|
|
unsigned int pcie_dbi2_offset;
|
|
struct dw_pcie_ep *ep;
|
|
struct resource *res;
|
|
struct dw_pcie *pci = imx6_pcie->pci;
|
|
struct dw_pcie_rp *pp = &pci->pp;
|
|
struct device *dev = pci->dev;
|
|
|
|
imx6_pcie_host_init(pp);
|
|
ep = &pci->ep;
|
|
ep->ops = &pcie_ep_ops;
|
|
|
|
switch (imx6_pcie->drvdata->variant) {
|
|
case IMX8MQ_EP:
|
|
case IMX8MM_EP:
|
|
case IMX8MP_EP:
|
|
pcie_dbi2_offset = SZ_1M;
|
|
break;
|
|
default:
|
|
pcie_dbi2_offset = SZ_4K;
|
|
break;
|
|
}
|
|
pci->dbi_base2 = pci->dbi_base + pcie_dbi2_offset;
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "addr_space");
|
|
if (!res)
|
|
return -EINVAL;
|
|
|
|
ep->phys_base = res->start;
|
|
ep->addr_size = resource_size(res);
|
|
ep->page_size = SZ_64K;
|
|
|
|
ret = dw_pcie_ep_init(ep);
|
|
if (ret) {
|
|
dev_err(dev, "failed to initialize endpoint\n");
|
|
return ret;
|
|
}
|
|
/* Start LTSSM. */
|
|
imx6_pcie_ltssm_enable(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void imx6_pcie_pm_turnoff(struct imx6_pcie *imx6_pcie)
|
|
{
|
|
struct device *dev = imx6_pcie->pci->dev;
|
|
|
|
/* Some variants have a turnoff reset in DT */
|
|
if (imx6_pcie->turnoff_reset) {
|
|
reset_control_assert(imx6_pcie->turnoff_reset);
|
|
reset_control_deassert(imx6_pcie->turnoff_reset);
|
|
goto pm_turnoff_sleep;
|
|
}
|
|
|
|
/* Others poke directly at IOMUXC registers */
|
|
switch (imx6_pcie->drvdata->variant) {
|
|
case IMX6SX:
|
|
case IMX6QP:
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
|
IMX6SX_GPR12_PCIE_PM_TURN_OFF,
|
|
IMX6SX_GPR12_PCIE_PM_TURN_OFF);
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
|
IMX6SX_GPR12_PCIE_PM_TURN_OFF, 0);
|
|
break;
|
|
default:
|
|
dev_err(dev, "PME_Turn_Off not implemented\n");
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Components with an upstream port must respond to
|
|
* PME_Turn_Off with PME_TO_Ack but we can't check.
|
|
*
|
|
* The standard recommends a 1-10ms timeout after which to
|
|
* proceed anyway as if acks were received.
|
|
*/
|
|
pm_turnoff_sleep:
|
|
usleep_range(1000, 10000);
|
|
}
|
|
|
|
static int imx6_pcie_suspend_noirq(struct device *dev)
|
|
{
|
|
struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
|
|
struct dw_pcie_rp *pp = &imx6_pcie->pci->pp;
|
|
|
|
if (!(imx6_pcie->drvdata->flags & IMX6_PCIE_FLAG_SUPPORTS_SUSPEND))
|
|
return 0;
|
|
|
|
imx6_pcie_pm_turnoff(imx6_pcie);
|
|
imx6_pcie_stop_link(imx6_pcie->pci);
|
|
imx6_pcie_host_exit(pp);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int imx6_pcie_resume_noirq(struct device *dev)
|
|
{
|
|
int ret;
|
|
struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
|
|
struct dw_pcie_rp *pp = &imx6_pcie->pci->pp;
|
|
|
|
if (!(imx6_pcie->drvdata->flags & IMX6_PCIE_FLAG_SUPPORTS_SUSPEND))
|
|
return 0;
|
|
|
|
ret = imx6_pcie_host_init(pp);
|
|
if (ret)
|
|
return ret;
|
|
dw_pcie_setup_rc(pp);
|
|
|
|
if (imx6_pcie->link_is_up)
|
|
imx6_pcie_start_link(imx6_pcie->pci);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops imx6_pcie_pm_ops = {
|
|
NOIRQ_SYSTEM_SLEEP_PM_OPS(imx6_pcie_suspend_noirq,
|
|
imx6_pcie_resume_noirq)
|
|
};
|
|
|
|
static int imx6_pcie_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct dw_pcie *pci;
|
|
struct imx6_pcie *imx6_pcie;
|
|
struct device_node *np;
|
|
struct resource *dbi_base;
|
|
struct device_node *node = dev->of_node;
|
|
int ret;
|
|
u16 val;
|
|
|
|
imx6_pcie = devm_kzalloc(dev, sizeof(*imx6_pcie), GFP_KERNEL);
|
|
if (!imx6_pcie)
|
|
return -ENOMEM;
|
|
|
|
pci = devm_kzalloc(dev, sizeof(*pci), GFP_KERNEL);
|
|
if (!pci)
|
|
return -ENOMEM;
|
|
|
|
pci->dev = dev;
|
|
pci->ops = &dw_pcie_ops;
|
|
pci->pp.ops = &imx6_pcie_host_ops;
|
|
|
|
imx6_pcie->pci = pci;
|
|
imx6_pcie->drvdata = of_device_get_match_data(dev);
|
|
|
|
/* Find the PHY if one is defined, only imx7d uses it */
|
|
np = of_parse_phandle(node, "fsl,imx7d-pcie-phy", 0);
|
|
if (np) {
|
|
struct resource res;
|
|
|
|
ret = of_address_to_resource(np, 0, &res);
|
|
if (ret) {
|
|
dev_err(dev, "Unable to map PCIe PHY\n");
|
|
return ret;
|
|
}
|
|
imx6_pcie->phy_base = devm_ioremap_resource(dev, &res);
|
|
if (IS_ERR(imx6_pcie->phy_base))
|
|
return PTR_ERR(imx6_pcie->phy_base);
|
|
}
|
|
|
|
dbi_base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
pci->dbi_base = devm_ioremap_resource(dev, dbi_base);
|
|
if (IS_ERR(pci->dbi_base))
|
|
return PTR_ERR(pci->dbi_base);
|
|
|
|
/* Fetch GPIOs */
|
|
imx6_pcie->reset_gpio = of_get_named_gpio(node, "reset-gpio", 0);
|
|
imx6_pcie->gpio_active_high = of_property_read_bool(node,
|
|
"reset-gpio-active-high");
|
|
if (gpio_is_valid(imx6_pcie->reset_gpio)) {
|
|
ret = devm_gpio_request_one(dev, imx6_pcie->reset_gpio,
|
|
imx6_pcie->gpio_active_high ?
|
|
GPIOF_OUT_INIT_HIGH :
|
|
GPIOF_OUT_INIT_LOW,
|
|
"PCIe reset");
|
|
if (ret) {
|
|
dev_err(dev, "unable to get reset gpio\n");
|
|
return ret;
|
|
}
|
|
} else if (imx6_pcie->reset_gpio == -EPROBE_DEFER) {
|
|
return imx6_pcie->reset_gpio;
|
|
}
|
|
|
|
/* Fetch clocks */
|
|
imx6_pcie->pcie_bus = devm_clk_get(dev, "pcie_bus");
|
|
if (IS_ERR(imx6_pcie->pcie_bus))
|
|
return dev_err_probe(dev, PTR_ERR(imx6_pcie->pcie_bus),
|
|
"pcie_bus clock source missing or invalid\n");
|
|
|
|
imx6_pcie->pcie = devm_clk_get(dev, "pcie");
|
|
if (IS_ERR(imx6_pcie->pcie))
|
|
return dev_err_probe(dev, PTR_ERR(imx6_pcie->pcie),
|
|
"pcie clock source missing or invalid\n");
|
|
|
|
switch (imx6_pcie->drvdata->variant) {
|
|
case IMX6SX:
|
|
imx6_pcie->pcie_inbound_axi = devm_clk_get(dev,
|
|
"pcie_inbound_axi");
|
|
if (IS_ERR(imx6_pcie->pcie_inbound_axi))
|
|
return dev_err_probe(dev, PTR_ERR(imx6_pcie->pcie_inbound_axi),
|
|
"pcie_inbound_axi clock missing or invalid\n");
|
|
break;
|
|
case IMX8MQ:
|
|
case IMX8MQ_EP:
|
|
imx6_pcie->pcie_aux = devm_clk_get(dev, "pcie_aux");
|
|
if (IS_ERR(imx6_pcie->pcie_aux))
|
|
return dev_err_probe(dev, PTR_ERR(imx6_pcie->pcie_aux),
|
|
"pcie_aux clock source missing or invalid\n");
|
|
fallthrough;
|
|
case IMX7D:
|
|
if (dbi_base->start == IMX8MQ_PCIE2_BASE_ADDR)
|
|
imx6_pcie->controller_id = 1;
|
|
|
|
imx6_pcie->pciephy_reset = devm_reset_control_get_exclusive(dev,
|
|
"pciephy");
|
|
if (IS_ERR(imx6_pcie->pciephy_reset)) {
|
|
dev_err(dev, "Failed to get PCIEPHY reset control\n");
|
|
return PTR_ERR(imx6_pcie->pciephy_reset);
|
|
}
|
|
|
|
imx6_pcie->apps_reset = devm_reset_control_get_exclusive(dev,
|
|
"apps");
|
|
if (IS_ERR(imx6_pcie->apps_reset)) {
|
|
dev_err(dev, "Failed to get PCIE APPS reset control\n");
|
|
return PTR_ERR(imx6_pcie->apps_reset);
|
|
}
|
|
break;
|
|
case IMX8MM:
|
|
case IMX8MM_EP:
|
|
case IMX8MP:
|
|
case IMX8MP_EP:
|
|
imx6_pcie->pcie_aux = devm_clk_get(dev, "pcie_aux");
|
|
if (IS_ERR(imx6_pcie->pcie_aux))
|
|
return dev_err_probe(dev, PTR_ERR(imx6_pcie->pcie_aux),
|
|
"pcie_aux clock source missing or invalid\n");
|
|
imx6_pcie->apps_reset = devm_reset_control_get_exclusive(dev,
|
|
"apps");
|
|
if (IS_ERR(imx6_pcie->apps_reset))
|
|
return dev_err_probe(dev, PTR_ERR(imx6_pcie->apps_reset),
|
|
"failed to get pcie apps reset control\n");
|
|
|
|
imx6_pcie->phy = devm_phy_get(dev, "pcie-phy");
|
|
if (IS_ERR(imx6_pcie->phy))
|
|
return dev_err_probe(dev, PTR_ERR(imx6_pcie->phy),
|
|
"failed to get pcie phy\n");
|
|
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
/* Don't fetch the pcie_phy clock, if it has abstract PHY driver */
|
|
if (imx6_pcie->phy == NULL) {
|
|
imx6_pcie->pcie_phy = devm_clk_get(dev, "pcie_phy");
|
|
if (IS_ERR(imx6_pcie->pcie_phy))
|
|
return dev_err_probe(dev, PTR_ERR(imx6_pcie->pcie_phy),
|
|
"pcie_phy clock source missing or invalid\n");
|
|
}
|
|
|
|
|
|
/* Grab turnoff reset */
|
|
imx6_pcie->turnoff_reset = devm_reset_control_get_optional_exclusive(dev, "turnoff");
|
|
if (IS_ERR(imx6_pcie->turnoff_reset)) {
|
|
dev_err(dev, "Failed to get TURNOFF reset control\n");
|
|
return PTR_ERR(imx6_pcie->turnoff_reset);
|
|
}
|
|
|
|
/* Grab GPR config register range */
|
|
imx6_pcie->iomuxc_gpr =
|
|
syscon_regmap_lookup_by_compatible(imx6_pcie->drvdata->gpr);
|
|
if (IS_ERR(imx6_pcie->iomuxc_gpr)) {
|
|
dev_err(dev, "unable to find iomuxc registers\n");
|
|
return PTR_ERR(imx6_pcie->iomuxc_gpr);
|
|
}
|
|
|
|
/* Grab PCIe PHY Tx Settings */
|
|
if (of_property_read_u32(node, "fsl,tx-deemph-gen1",
|
|
&imx6_pcie->tx_deemph_gen1))
|
|
imx6_pcie->tx_deemph_gen1 = 0;
|
|
|
|
if (of_property_read_u32(node, "fsl,tx-deemph-gen2-3p5db",
|
|
&imx6_pcie->tx_deemph_gen2_3p5db))
|
|
imx6_pcie->tx_deemph_gen2_3p5db = 0;
|
|
|
|
if (of_property_read_u32(node, "fsl,tx-deemph-gen2-6db",
|
|
&imx6_pcie->tx_deemph_gen2_6db))
|
|
imx6_pcie->tx_deemph_gen2_6db = 20;
|
|
|
|
if (of_property_read_u32(node, "fsl,tx-swing-full",
|
|
&imx6_pcie->tx_swing_full))
|
|
imx6_pcie->tx_swing_full = 127;
|
|
|
|
if (of_property_read_u32(node, "fsl,tx-swing-low",
|
|
&imx6_pcie->tx_swing_low))
|
|
imx6_pcie->tx_swing_low = 127;
|
|
|
|
/* Limit link speed */
|
|
pci->link_gen = 1;
|
|
of_property_read_u32(node, "fsl,max-link-speed", &pci->link_gen);
|
|
|
|
imx6_pcie->vpcie = devm_regulator_get_optional(&pdev->dev, "vpcie");
|
|
if (IS_ERR(imx6_pcie->vpcie)) {
|
|
if (PTR_ERR(imx6_pcie->vpcie) != -ENODEV)
|
|
return PTR_ERR(imx6_pcie->vpcie);
|
|
imx6_pcie->vpcie = NULL;
|
|
}
|
|
|
|
imx6_pcie->vph = devm_regulator_get_optional(&pdev->dev, "vph");
|
|
if (IS_ERR(imx6_pcie->vph)) {
|
|
if (PTR_ERR(imx6_pcie->vph) != -ENODEV)
|
|
return PTR_ERR(imx6_pcie->vph);
|
|
imx6_pcie->vph = NULL;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, imx6_pcie);
|
|
|
|
ret = imx6_pcie_attach_pd(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (imx6_pcie->drvdata->mode == DW_PCIE_EP_TYPE) {
|
|
ret = imx6_add_pcie_ep(imx6_pcie, pdev);
|
|
if (ret < 0)
|
|
return ret;
|
|
} else {
|
|
ret = dw_pcie_host_init(&pci->pp);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (pci_msi_enabled()) {
|
|
u8 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_MSI);
|
|
|
|
val = dw_pcie_readw_dbi(pci, offset + PCI_MSI_FLAGS);
|
|
val |= PCI_MSI_FLAGS_ENABLE;
|
|
dw_pcie_writew_dbi(pci, offset + PCI_MSI_FLAGS, val);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void imx6_pcie_shutdown(struct platform_device *pdev)
|
|
{
|
|
struct imx6_pcie *imx6_pcie = platform_get_drvdata(pdev);
|
|
|
|
/* bring down link, so bootloader gets clean state in case of reboot */
|
|
imx6_pcie_assert_core_reset(imx6_pcie);
|
|
}
|
|
|
|
static const struct imx6_pcie_drvdata drvdata[] = {
|
|
[IMX6Q] = {
|
|
.variant = IMX6Q,
|
|
.flags = IMX6_PCIE_FLAG_IMX6_PHY |
|
|
IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE,
|
|
.dbi_length = 0x200,
|
|
.gpr = "fsl,imx6q-iomuxc-gpr",
|
|
},
|
|
[IMX6SX] = {
|
|
.variant = IMX6SX,
|
|
.flags = IMX6_PCIE_FLAG_IMX6_PHY |
|
|
IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE |
|
|
IMX6_PCIE_FLAG_SUPPORTS_SUSPEND,
|
|
.gpr = "fsl,imx6q-iomuxc-gpr",
|
|
},
|
|
[IMX6QP] = {
|
|
.variant = IMX6QP,
|
|
.flags = IMX6_PCIE_FLAG_IMX6_PHY |
|
|
IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE |
|
|
IMX6_PCIE_FLAG_SUPPORTS_SUSPEND,
|
|
.dbi_length = 0x200,
|
|
.gpr = "fsl,imx6q-iomuxc-gpr",
|
|
},
|
|
[IMX7D] = {
|
|
.variant = IMX7D,
|
|
.flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND,
|
|
.gpr = "fsl,imx7d-iomuxc-gpr",
|
|
},
|
|
[IMX8MQ] = {
|
|
.variant = IMX8MQ,
|
|
.gpr = "fsl,imx8mq-iomuxc-gpr",
|
|
},
|
|
[IMX8MM] = {
|
|
.variant = IMX8MM,
|
|
.flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND,
|
|
.gpr = "fsl,imx8mm-iomuxc-gpr",
|
|
},
|
|
[IMX8MP] = {
|
|
.variant = IMX8MP,
|
|
.flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND,
|
|
.gpr = "fsl,imx8mp-iomuxc-gpr",
|
|
},
|
|
[IMX8MQ_EP] = {
|
|
.variant = IMX8MQ_EP,
|
|
.mode = DW_PCIE_EP_TYPE,
|
|
.gpr = "fsl,imx8mq-iomuxc-gpr",
|
|
},
|
|
[IMX8MM_EP] = {
|
|
.variant = IMX8MM_EP,
|
|
.mode = DW_PCIE_EP_TYPE,
|
|
.gpr = "fsl,imx8mm-iomuxc-gpr",
|
|
},
|
|
[IMX8MP_EP] = {
|
|
.variant = IMX8MP_EP,
|
|
.mode = DW_PCIE_EP_TYPE,
|
|
.gpr = "fsl,imx8mp-iomuxc-gpr",
|
|
},
|
|
};
|
|
|
|
static const struct of_device_id imx6_pcie_of_match[] = {
|
|
{ .compatible = "fsl,imx6q-pcie", .data = &drvdata[IMX6Q], },
|
|
{ .compatible = "fsl,imx6sx-pcie", .data = &drvdata[IMX6SX], },
|
|
{ .compatible = "fsl,imx6qp-pcie", .data = &drvdata[IMX6QP], },
|
|
{ .compatible = "fsl,imx7d-pcie", .data = &drvdata[IMX7D], },
|
|
{ .compatible = "fsl,imx8mq-pcie", .data = &drvdata[IMX8MQ], },
|
|
{ .compatible = "fsl,imx8mm-pcie", .data = &drvdata[IMX8MM], },
|
|
{ .compatible = "fsl,imx8mp-pcie", .data = &drvdata[IMX8MP], },
|
|
{ .compatible = "fsl,imx8mq-pcie-ep", .data = &drvdata[IMX8MQ_EP], },
|
|
{ .compatible = "fsl,imx8mm-pcie-ep", .data = &drvdata[IMX8MM_EP], },
|
|
{ .compatible = "fsl,imx8mp-pcie-ep", .data = &drvdata[IMX8MP_EP], },
|
|
{},
|
|
};
|
|
|
|
static struct platform_driver imx6_pcie_driver = {
|
|
.driver = {
|
|
.name = "imx6q-pcie",
|
|
.of_match_table = imx6_pcie_of_match,
|
|
.suppress_bind_attrs = true,
|
|
.pm = &imx6_pcie_pm_ops,
|
|
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
|
|
},
|
|
.probe = imx6_pcie_probe,
|
|
.shutdown = imx6_pcie_shutdown,
|
|
};
|
|
|
|
static void imx6_pcie_quirk(struct pci_dev *dev)
|
|
{
|
|
struct pci_bus *bus = dev->bus;
|
|
struct dw_pcie_rp *pp = bus->sysdata;
|
|
|
|
/* Bus parent is the PCI bridge, its parent is this platform driver */
|
|
if (!bus->dev.parent || !bus->dev.parent->parent)
|
|
return;
|
|
|
|
/* Make sure we only quirk devices associated with this driver */
|
|
if (bus->dev.parent->parent->driver != &imx6_pcie_driver.driver)
|
|
return;
|
|
|
|
if (pci_is_root_bus(bus)) {
|
|
struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
|
|
struct imx6_pcie *imx6_pcie = to_imx6_pcie(pci);
|
|
|
|
/*
|
|
* Limit config length to avoid the kernel reading beyond
|
|
* the register set and causing an abort on i.MX 6Quad
|
|
*/
|
|
if (imx6_pcie->drvdata->dbi_length) {
|
|
dev->cfg_size = imx6_pcie->drvdata->dbi_length;
|
|
dev_info(&dev->dev, "Limiting cfg_size to %d\n",
|
|
dev->cfg_size);
|
|
}
|
|
}
|
|
}
|
|
DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_SYNOPSYS, 0xabcd,
|
|
PCI_CLASS_BRIDGE_PCI, 8, imx6_pcie_quirk);
|
|
|
|
static int __init imx6_pcie_init(void)
|
|
{
|
|
#ifdef CONFIG_ARM
|
|
struct device_node *np;
|
|
|
|
np = of_find_matching_node(NULL, imx6_pcie_of_match);
|
|
if (!np)
|
|
return -ENODEV;
|
|
of_node_put(np);
|
|
|
|
/*
|
|
* Since probe() can be deferred we need to make sure that
|
|
* hook_fault_code is not called after __init memory is freed
|
|
* by kernel and since imx6q_pcie_abort_handler() is a no-op,
|
|
* we can install the handler here without risking it
|
|
* accessing some uninitialized driver state.
|
|
*/
|
|
hook_fault_code(8, imx6q_pcie_abort_handler, SIGBUS, 0,
|
|
"external abort on non-linefetch");
|
|
#endif
|
|
|
|
return platform_driver_register(&imx6_pcie_driver);
|
|
}
|
|
device_initcall(imx6_pcie_init);
|