mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-15 08:14:15 +08:00
f9b17ffcb5
d7133797e9("mmc: sdhci-pci-gli: A workaround to allow GL9750 to enter ASPM L1.2") and36ed2fd32b("mmc: sdhci-pci-gli: A workaround to allow GL9755 to enter ASPM L1.2") added writes to the Control register in the Power Management Capability to put the device in D3hot and back to D0. Use the pci_set_power_state() interface instead because these are generic operations that don't need to be driver-specific. Also, the PCI spec requires some delays after these power transitions, and pci_set_power_state() takes care of those, whiled7133797e9and36ed2fd32bdid not. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Ben Chuang <ben.chuang@genesyslogic.com.tw> Link: https://lore.kernel.org/r/20240327214831.1544595-3-helgaas@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
1611 lines
46 KiB
C
1611 lines
46 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2019 Genesys Logic, Inc.
|
|
*
|
|
* Authors: Ben Chuang <ben.chuang@genesyslogic.com.tw>
|
|
*
|
|
* Version: v0.9.0 (2019-08-08)
|
|
*/
|
|
|
|
#include <linux/bitfield.h>
|
|
#include <linux/bits.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/mmc/mmc.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/of.h>
|
|
#include <linux/iopoll.h>
|
|
#include "sdhci.h"
|
|
#include "sdhci-cqhci.h"
|
|
#include "sdhci-pci.h"
|
|
#include "cqhci.h"
|
|
|
|
/* Genesys Logic extra registers */
|
|
#define SDHCI_GLI_9750_WT 0x800
|
|
#define SDHCI_GLI_9750_WT_EN BIT(0)
|
|
#define GLI_9750_WT_EN_ON 0x1
|
|
#define GLI_9750_WT_EN_OFF 0x0
|
|
|
|
#define SDHCI_GLI_9750_CFG2 0x848
|
|
#define SDHCI_GLI_9750_CFG2_L1DLY GENMASK(28, 24)
|
|
#define GLI_9750_CFG2_L1DLY_VALUE 0x1F
|
|
|
|
#define SDHCI_GLI_9750_DRIVING 0x860
|
|
#define SDHCI_GLI_9750_DRIVING_1 GENMASK(11, 0)
|
|
#define SDHCI_GLI_9750_DRIVING_2 GENMASK(27, 26)
|
|
#define GLI_9750_DRIVING_1_VALUE 0xFFF
|
|
#define GLI_9750_DRIVING_2_VALUE 0x3
|
|
#define SDHCI_GLI_9750_SEL_1 BIT(29)
|
|
#define SDHCI_GLI_9750_SEL_2 BIT(31)
|
|
#define SDHCI_GLI_9750_ALL_RST (BIT(24)|BIT(25)|BIT(28)|BIT(30))
|
|
|
|
#define SDHCI_GLI_9750_PLL 0x864
|
|
#define SDHCI_GLI_9750_PLL_LDIV GENMASK(9, 0)
|
|
#define SDHCI_GLI_9750_PLL_PDIV GENMASK(14, 12)
|
|
#define SDHCI_GLI_9750_PLL_DIR BIT(15)
|
|
#define SDHCI_GLI_9750_PLL_TX2_INV BIT(23)
|
|
#define SDHCI_GLI_9750_PLL_TX2_DLY GENMASK(22, 20)
|
|
#define GLI_9750_PLL_TX2_INV_VALUE 0x1
|
|
#define GLI_9750_PLL_TX2_DLY_VALUE 0x0
|
|
#define SDHCI_GLI_9750_PLLSSC_STEP GENMASK(28, 24)
|
|
#define SDHCI_GLI_9750_PLLSSC_EN BIT(31)
|
|
|
|
#define SDHCI_GLI_9750_PLLSSC 0x86C
|
|
#define SDHCI_GLI_9750_PLLSSC_PPM GENMASK(31, 16)
|
|
|
|
#define SDHCI_GLI_9750_SW_CTRL 0x874
|
|
#define SDHCI_GLI_9750_SW_CTRL_4 GENMASK(7, 6)
|
|
#define GLI_9750_SW_CTRL_4_VALUE 0x3
|
|
|
|
#define SDHCI_GLI_9750_MISC 0x878
|
|
#define SDHCI_GLI_9750_MISC_TX1_INV BIT(2)
|
|
#define SDHCI_GLI_9750_MISC_RX_INV BIT(3)
|
|
#define SDHCI_GLI_9750_MISC_TX1_DLY GENMASK(6, 4)
|
|
#define GLI_9750_MISC_TX1_INV_VALUE 0x0
|
|
#define GLI_9750_MISC_RX_INV_ON 0x1
|
|
#define GLI_9750_MISC_RX_INV_OFF 0x0
|
|
#define GLI_9750_MISC_RX_INV_VALUE GLI_9750_MISC_RX_INV_OFF
|
|
#define GLI_9750_MISC_TX1_DLY_VALUE 0x5
|
|
#define SDHCI_GLI_9750_MISC_SSC_OFF BIT(26)
|
|
|
|
#define SDHCI_GLI_9750_TUNING_CONTROL 0x540
|
|
#define SDHCI_GLI_9750_TUNING_CONTROL_EN BIT(4)
|
|
#define GLI_9750_TUNING_CONTROL_EN_ON 0x1
|
|
#define GLI_9750_TUNING_CONTROL_EN_OFF 0x0
|
|
#define SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_1 BIT(16)
|
|
#define SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_2 GENMASK(20, 19)
|
|
#define GLI_9750_TUNING_CONTROL_GLITCH_1_VALUE 0x1
|
|
#define GLI_9750_TUNING_CONTROL_GLITCH_2_VALUE 0x2
|
|
|
|
#define SDHCI_GLI_9750_TUNING_PARAMETERS 0x544
|
|
#define SDHCI_GLI_9750_TUNING_PARAMETERS_RX_DLY GENMASK(2, 0)
|
|
#define GLI_9750_TUNING_PARAMETERS_RX_DLY_VALUE 0x1
|
|
|
|
#define SDHCI_GLI_9763E_CTRL_HS400 0x7
|
|
|
|
#define SDHCI_GLI_9763E_HS400_ES_REG 0x52C
|
|
#define SDHCI_GLI_9763E_HS400_ES_BIT BIT(8)
|
|
|
|
#define PCIE_GLI_9763E_VHS 0x884
|
|
#define GLI_9763E_VHS_REV GENMASK(19, 16)
|
|
#define GLI_9763E_VHS_REV_R 0x0
|
|
#define GLI_9763E_VHS_REV_M 0x1
|
|
#define GLI_9763E_VHS_REV_W 0x2
|
|
#define PCIE_GLI_9763E_MB 0x888
|
|
#define GLI_9763E_MB_CMDQ_OFF BIT(19)
|
|
#define GLI_9763E_MB_ERP_ON BIT(7)
|
|
#define PCIE_GLI_9763E_SCR 0x8E0
|
|
#define GLI_9763E_SCR_AXI_REQ BIT(9)
|
|
|
|
#define PCIE_GLI_9763E_CFG 0x8A0
|
|
#define GLI_9763E_CFG_LPSN_DIS BIT(12)
|
|
|
|
#define PCIE_GLI_9763E_CFG2 0x8A4
|
|
#define GLI_9763E_CFG2_L1DLY GENMASK(28, 19)
|
|
#define GLI_9763E_CFG2_L1DLY_MID 0x54
|
|
|
|
#define PCIE_GLI_9763E_MMC_CTRL 0x960
|
|
#define GLI_9763E_HS400_SLOW BIT(3)
|
|
|
|
#define PCIE_GLI_9763E_CLKRXDLY 0x934
|
|
#define GLI_9763E_HS400_RXDLY GENMASK(31, 28)
|
|
#define GLI_9763E_HS400_RXDLY_5 0x5
|
|
|
|
#define SDHCI_GLI_9763E_CQE_BASE_ADDR 0x200
|
|
#define GLI_9763E_CQE_TRNS_MODE (SDHCI_TRNS_MULTI | \
|
|
SDHCI_TRNS_BLK_CNT_EN | \
|
|
SDHCI_TRNS_DMA)
|
|
|
|
#define PCI_GLI_9755_WT 0x800
|
|
#define PCI_GLI_9755_WT_EN BIT(0)
|
|
#define GLI_9755_WT_EN_ON 0x1
|
|
#define GLI_9755_WT_EN_OFF 0x0
|
|
|
|
#define PCI_GLI_9755_PECONF 0x44
|
|
#define PCI_GLI_9755_LFCLK GENMASK(14, 12)
|
|
#define PCI_GLI_9755_DMACLK BIT(29)
|
|
#define PCI_GLI_9755_INVERT_CD BIT(30)
|
|
#define PCI_GLI_9755_INVERT_WP BIT(31)
|
|
|
|
#define PCI_GLI_9755_CFG2 0x48
|
|
#define PCI_GLI_9755_CFG2_L1DLY GENMASK(28, 24)
|
|
#define GLI_9755_CFG2_L1DLY_VALUE 0x1F
|
|
|
|
#define PCI_GLI_9755_PLL 0x64
|
|
#define PCI_GLI_9755_PLL_LDIV GENMASK(9, 0)
|
|
#define PCI_GLI_9755_PLL_PDIV GENMASK(14, 12)
|
|
#define PCI_GLI_9755_PLL_DIR BIT(15)
|
|
#define PCI_GLI_9755_PLLSSC_STEP GENMASK(28, 24)
|
|
#define PCI_GLI_9755_PLLSSC_EN BIT(31)
|
|
|
|
#define PCI_GLI_9755_PLLSSC 0x68
|
|
#define PCI_GLI_9755_PLLSSC_PPM GENMASK(15, 0)
|
|
|
|
#define PCI_GLI_9755_SerDes 0x70
|
|
#define PCI_GLI_9755_SCP_DIS BIT(19)
|
|
|
|
#define PCI_GLI_9755_MISC 0x78
|
|
#define PCI_GLI_9755_MISC_SSC_OFF BIT(26)
|
|
|
|
#define SDHCI_GLI_9767_GM_BURST_SIZE 0x510
|
|
#define SDHCI_GLI_9767_GM_BURST_SIZE_AXI_ALWAYS_SET BIT(8)
|
|
|
|
#define PCIE_GLI_9767_VHS 0x884
|
|
#define GLI_9767_VHS_REV GENMASK(19, 16)
|
|
#define GLI_9767_VHS_REV_R 0x0
|
|
#define GLI_9767_VHS_REV_M 0x1
|
|
#define GLI_9767_VHS_REV_W 0x2
|
|
|
|
#define PCIE_GLI_9767_COM_MAILBOX 0x888
|
|
#define PCIE_GLI_9767_COM_MAILBOX_SSC_EN BIT(1)
|
|
|
|
#define PCIE_GLI_9767_CFG 0x8A0
|
|
#define PCIE_GLI_9767_CFG_LOW_PWR_OFF BIT(12)
|
|
|
|
#define PCIE_GLI_9767_COMBO_MUX_CTL 0x8C8
|
|
#define PCIE_GLI_9767_COMBO_MUX_CTL_RST_EN BIT(6)
|
|
#define PCIE_GLI_9767_COMBO_MUX_CTL_WAIT_PERST_EN BIT(10)
|
|
|
|
#define PCIE_GLI_9767_PWR_MACRO_CTL 0x8D0
|
|
#define PCIE_GLI_9767_PWR_MACRO_CTL_LOW_VOLTAGE GENMASK(3, 0)
|
|
#define PCIE_GLI_9767_PWR_MACRO_CTL_LD0_LOW_OUTPUT_VOLTAGE GENMASK(15, 12)
|
|
#define PCIE_GLI_9767_PWR_MACRO_CTL_LD0_LOW_OUTPUT_VOLTAGE_VALUE 0x7
|
|
#define PCIE_GLI_9767_PWR_MACRO_CTL_RCLK_AMPLITUDE_CTL GENMASK(29, 28)
|
|
#define PCIE_GLI_9767_PWR_MACRO_CTL_RCLK_AMPLITUDE_CTL_VALUE 0x3
|
|
|
|
#define PCIE_GLI_9767_SCR 0x8E0
|
|
#define PCIE_GLI_9767_SCR_AUTO_AXI_W_BURST BIT(6)
|
|
#define PCIE_GLI_9767_SCR_AUTO_AXI_R_BURST BIT(7)
|
|
#define PCIE_GLI_9767_SCR_AXI_REQ BIT(9)
|
|
#define PCIE_GLI_9767_SCR_CARD_DET_PWR_SAVING_EN BIT(10)
|
|
#define PCIE_GLI_9767_SCR_SYSTEM_CLK_SELECT_MODE0 BIT(16)
|
|
#define PCIE_GLI_9767_SCR_SYSTEM_CLK_SELECT_MODE1 BIT(17)
|
|
#define PCIE_GLI_9767_SCR_CORE_PWR_D3_OFF BIT(21)
|
|
#define PCIE_GLI_9767_SCR_CFG_RST_DATA_LINK_DOWN BIT(30)
|
|
|
|
#define PCIE_GLI_9767_SDHC_CAP 0x91C
|
|
#define PCIE_GLI_9767_SDHC_CAP_SDEI_RESULT BIT(5)
|
|
|
|
#define PCIE_GLI_9767_SD_PLL_CTL 0x938
|
|
#define PCIE_GLI_9767_SD_PLL_CTL_PLL_LDIV GENMASK(9, 0)
|
|
#define PCIE_GLI_9767_SD_PLL_CTL_PLL_PDIV GENMASK(15, 12)
|
|
#define PCIE_GLI_9767_SD_PLL_CTL_PLL_DIR_EN BIT(16)
|
|
#define PCIE_GLI_9767_SD_PLL_CTL_SSC_EN BIT(19)
|
|
#define PCIE_GLI_9767_SD_PLL_CTL_SSC_STEP_SETTING GENMASK(28, 24)
|
|
|
|
#define PCIE_GLI_9767_SD_PLL_CTL2 0x93C
|
|
#define PCIE_GLI_9767_SD_PLL_CTL2_PLLSSC_PPM GENMASK(31, 16)
|
|
|
|
#define PCIE_GLI_9767_SD_EXPRESS_CTL 0x940
|
|
#define PCIE_GLI_9767_SD_EXPRESS_CTL_SDEI_EXE BIT(0)
|
|
#define PCIE_GLI_9767_SD_EXPRESS_CTL_SD_EXPRESS_MODE BIT(1)
|
|
|
|
#define PCIE_GLI_9767_SD_DATA_MULTI_CTL 0x944
|
|
#define PCIE_GLI_9767_SD_DATA_MULTI_CTL_DISCONNECT_TIME GENMASK(23, 16)
|
|
#define PCIE_GLI_9767_SD_DATA_MULTI_CTL_DISCONNECT_TIME_VALUE 0x64
|
|
|
|
#define PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2 0x950
|
|
#define PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2_SDEI_COMPLETE BIT(0)
|
|
|
|
#define PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_EN_REG2 0x954
|
|
#define PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_EN_REG2_SDEI_COMPLETE_STATUS_EN BIT(0)
|
|
|
|
#define PCIE_GLI_9767_NORMAL_ERR_INT_SIGNAL_EN_REG2 0x958
|
|
#define PCIE_GLI_9767_NORMAL_ERR_INT_SIGNAL_EN_REG2_SDEI_COMPLETE_SIGNAL_EN BIT(0)
|
|
|
|
#define GLI_MAX_TUNING_LOOP 40
|
|
|
|
/* Genesys Logic chipset */
|
|
static inline void gl9750_wt_on(struct sdhci_host *host)
|
|
{
|
|
u32 wt_value;
|
|
u32 wt_enable;
|
|
|
|
wt_value = sdhci_readl(host, SDHCI_GLI_9750_WT);
|
|
wt_enable = FIELD_GET(SDHCI_GLI_9750_WT_EN, wt_value);
|
|
|
|
if (wt_enable == GLI_9750_WT_EN_ON)
|
|
return;
|
|
|
|
wt_value &= ~SDHCI_GLI_9750_WT_EN;
|
|
wt_value |= FIELD_PREP(SDHCI_GLI_9750_WT_EN, GLI_9750_WT_EN_ON);
|
|
|
|
sdhci_writel(host, wt_value, SDHCI_GLI_9750_WT);
|
|
}
|
|
|
|
static inline void gl9750_wt_off(struct sdhci_host *host)
|
|
{
|
|
u32 wt_value;
|
|
u32 wt_enable;
|
|
|
|
wt_value = sdhci_readl(host, SDHCI_GLI_9750_WT);
|
|
wt_enable = FIELD_GET(SDHCI_GLI_9750_WT_EN, wt_value);
|
|
|
|
if (wt_enable == GLI_9750_WT_EN_OFF)
|
|
return;
|
|
|
|
wt_value &= ~SDHCI_GLI_9750_WT_EN;
|
|
wt_value |= FIELD_PREP(SDHCI_GLI_9750_WT_EN, GLI_9750_WT_EN_OFF);
|
|
|
|
sdhci_writel(host, wt_value, SDHCI_GLI_9750_WT);
|
|
}
|
|
|
|
static void gli_set_9750(struct sdhci_host *host)
|
|
{
|
|
u32 driving_value;
|
|
u32 pll_value;
|
|
u32 sw_ctrl_value;
|
|
u32 misc_value;
|
|
u32 parameter_value;
|
|
u32 control_value;
|
|
u16 ctrl2;
|
|
|
|
gl9750_wt_on(host);
|
|
|
|
driving_value = sdhci_readl(host, SDHCI_GLI_9750_DRIVING);
|
|
pll_value = sdhci_readl(host, SDHCI_GLI_9750_PLL);
|
|
sw_ctrl_value = sdhci_readl(host, SDHCI_GLI_9750_SW_CTRL);
|
|
misc_value = sdhci_readl(host, SDHCI_GLI_9750_MISC);
|
|
parameter_value = sdhci_readl(host, SDHCI_GLI_9750_TUNING_PARAMETERS);
|
|
control_value = sdhci_readl(host, SDHCI_GLI_9750_TUNING_CONTROL);
|
|
|
|
driving_value &= ~(SDHCI_GLI_9750_DRIVING_1);
|
|
driving_value &= ~(SDHCI_GLI_9750_DRIVING_2);
|
|
driving_value |= FIELD_PREP(SDHCI_GLI_9750_DRIVING_1,
|
|
GLI_9750_DRIVING_1_VALUE);
|
|
driving_value |= FIELD_PREP(SDHCI_GLI_9750_DRIVING_2,
|
|
GLI_9750_DRIVING_2_VALUE);
|
|
driving_value &= ~(SDHCI_GLI_9750_SEL_1|SDHCI_GLI_9750_SEL_2|SDHCI_GLI_9750_ALL_RST);
|
|
driving_value |= SDHCI_GLI_9750_SEL_2;
|
|
sdhci_writel(host, driving_value, SDHCI_GLI_9750_DRIVING);
|
|
|
|
sw_ctrl_value &= ~SDHCI_GLI_9750_SW_CTRL_4;
|
|
sw_ctrl_value |= FIELD_PREP(SDHCI_GLI_9750_SW_CTRL_4,
|
|
GLI_9750_SW_CTRL_4_VALUE);
|
|
sdhci_writel(host, sw_ctrl_value, SDHCI_GLI_9750_SW_CTRL);
|
|
|
|
/* reset the tuning flow after reinit and before starting tuning */
|
|
pll_value &= ~SDHCI_GLI_9750_PLL_TX2_INV;
|
|
pll_value &= ~SDHCI_GLI_9750_PLL_TX2_DLY;
|
|
pll_value |= FIELD_PREP(SDHCI_GLI_9750_PLL_TX2_INV,
|
|
GLI_9750_PLL_TX2_INV_VALUE);
|
|
pll_value |= FIELD_PREP(SDHCI_GLI_9750_PLL_TX2_DLY,
|
|
GLI_9750_PLL_TX2_DLY_VALUE);
|
|
|
|
misc_value &= ~SDHCI_GLI_9750_MISC_TX1_INV;
|
|
misc_value &= ~SDHCI_GLI_9750_MISC_RX_INV;
|
|
misc_value &= ~SDHCI_GLI_9750_MISC_TX1_DLY;
|
|
misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_TX1_INV,
|
|
GLI_9750_MISC_TX1_INV_VALUE);
|
|
misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_RX_INV,
|
|
GLI_9750_MISC_RX_INV_VALUE);
|
|
misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_TX1_DLY,
|
|
GLI_9750_MISC_TX1_DLY_VALUE);
|
|
|
|
parameter_value &= ~SDHCI_GLI_9750_TUNING_PARAMETERS_RX_DLY;
|
|
parameter_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_PARAMETERS_RX_DLY,
|
|
GLI_9750_TUNING_PARAMETERS_RX_DLY_VALUE);
|
|
|
|
control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_1;
|
|
control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_2;
|
|
control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_1,
|
|
GLI_9750_TUNING_CONTROL_GLITCH_1_VALUE);
|
|
control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_2,
|
|
GLI_9750_TUNING_CONTROL_GLITCH_2_VALUE);
|
|
|
|
sdhci_writel(host, pll_value, SDHCI_GLI_9750_PLL);
|
|
sdhci_writel(host, misc_value, SDHCI_GLI_9750_MISC);
|
|
|
|
/* disable tuned clk */
|
|
ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
|
|
ctrl2 &= ~SDHCI_CTRL_TUNED_CLK;
|
|
sdhci_writew(host, ctrl2, SDHCI_HOST_CONTROL2);
|
|
|
|
/* enable tuning parameters control */
|
|
control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_EN;
|
|
control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_EN,
|
|
GLI_9750_TUNING_CONTROL_EN_ON);
|
|
sdhci_writel(host, control_value, SDHCI_GLI_9750_TUNING_CONTROL);
|
|
|
|
/* write tuning parameters */
|
|
sdhci_writel(host, parameter_value, SDHCI_GLI_9750_TUNING_PARAMETERS);
|
|
|
|
/* disable tuning parameters control */
|
|
control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_EN;
|
|
control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_EN,
|
|
GLI_9750_TUNING_CONTROL_EN_OFF);
|
|
sdhci_writel(host, control_value, SDHCI_GLI_9750_TUNING_CONTROL);
|
|
|
|
/* clear tuned clk */
|
|
ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
|
|
ctrl2 &= ~SDHCI_CTRL_TUNED_CLK;
|
|
sdhci_writew(host, ctrl2, SDHCI_HOST_CONTROL2);
|
|
|
|
gl9750_wt_off(host);
|
|
}
|
|
|
|
static void gli_set_9750_rx_inv(struct sdhci_host *host, bool b)
|
|
{
|
|
u32 misc_value;
|
|
|
|
gl9750_wt_on(host);
|
|
|
|
misc_value = sdhci_readl(host, SDHCI_GLI_9750_MISC);
|
|
misc_value &= ~SDHCI_GLI_9750_MISC_RX_INV;
|
|
if (b) {
|
|
misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_RX_INV,
|
|
GLI_9750_MISC_RX_INV_ON);
|
|
} else {
|
|
misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_RX_INV,
|
|
GLI_9750_MISC_RX_INV_OFF);
|
|
}
|
|
sdhci_writel(host, misc_value, SDHCI_GLI_9750_MISC);
|
|
|
|
gl9750_wt_off(host);
|
|
}
|
|
|
|
static int __sdhci_execute_tuning_9750(struct sdhci_host *host, u32 opcode)
|
|
{
|
|
int i;
|
|
int rx_inv;
|
|
|
|
for (rx_inv = 0; rx_inv < 2; rx_inv++) {
|
|
gli_set_9750_rx_inv(host, !!rx_inv);
|
|
sdhci_start_tuning(host);
|
|
|
|
for (i = 0; i < GLI_MAX_TUNING_LOOP; i++) {
|
|
u16 ctrl;
|
|
|
|
sdhci_send_tuning(host, opcode);
|
|
|
|
if (!host->tuning_done) {
|
|
sdhci_abort_tuning(host, opcode);
|
|
break;
|
|
}
|
|
|
|
ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
|
|
if (!(ctrl & SDHCI_CTRL_EXEC_TUNING)) {
|
|
if (ctrl & SDHCI_CTRL_TUNED_CLK)
|
|
return 0; /* Success! */
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
if (!host->tuning_done) {
|
|
pr_info("%s: Tuning timeout, falling back to fixed sampling clock\n",
|
|
mmc_hostname(host->mmc));
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
pr_info("%s: Tuning failed, falling back to fixed sampling clock\n",
|
|
mmc_hostname(host->mmc));
|
|
sdhci_reset_tuning(host);
|
|
|
|
return -EAGAIN;
|
|
}
|
|
|
|
static int gl9750_execute_tuning(struct sdhci_host *host, u32 opcode)
|
|
{
|
|
host->mmc->retune_period = 0;
|
|
if (host->tuning_mode == SDHCI_TUNING_MODE_1)
|
|
host->mmc->retune_period = host->tuning_count;
|
|
|
|
gli_set_9750(host);
|
|
host->tuning_err = __sdhci_execute_tuning_9750(host, opcode);
|
|
sdhci_end_tuning(host);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void gl9750_disable_ssc_pll(struct sdhci_host *host)
|
|
{
|
|
u32 pll;
|
|
|
|
gl9750_wt_on(host);
|
|
pll = sdhci_readl(host, SDHCI_GLI_9750_PLL);
|
|
pll &= ~(SDHCI_GLI_9750_PLL_DIR | SDHCI_GLI_9750_PLLSSC_EN);
|
|
sdhci_writel(host, pll, SDHCI_GLI_9750_PLL);
|
|
gl9750_wt_off(host);
|
|
}
|
|
|
|
static void gl9750_set_pll(struct sdhci_host *host, u8 dir, u16 ldiv, u8 pdiv)
|
|
{
|
|
u32 pll;
|
|
|
|
gl9750_wt_on(host);
|
|
pll = sdhci_readl(host, SDHCI_GLI_9750_PLL);
|
|
pll &= ~(SDHCI_GLI_9750_PLL_LDIV |
|
|
SDHCI_GLI_9750_PLL_PDIV |
|
|
SDHCI_GLI_9750_PLL_DIR);
|
|
pll |= FIELD_PREP(SDHCI_GLI_9750_PLL_LDIV, ldiv) |
|
|
FIELD_PREP(SDHCI_GLI_9750_PLL_PDIV, pdiv) |
|
|
FIELD_PREP(SDHCI_GLI_9750_PLL_DIR, dir);
|
|
sdhci_writel(host, pll, SDHCI_GLI_9750_PLL);
|
|
gl9750_wt_off(host);
|
|
|
|
/* wait for pll stable */
|
|
mdelay(1);
|
|
}
|
|
|
|
static bool gl9750_ssc_enable(struct sdhci_host *host)
|
|
{
|
|
u32 misc;
|
|
u8 off;
|
|
|
|
gl9750_wt_on(host);
|
|
misc = sdhci_readl(host, SDHCI_GLI_9750_MISC);
|
|
off = FIELD_GET(SDHCI_GLI_9750_MISC_SSC_OFF, misc);
|
|
gl9750_wt_off(host);
|
|
|
|
return !off;
|
|
}
|
|
|
|
static void gl9750_set_ssc(struct sdhci_host *host, u8 enable, u8 step, u16 ppm)
|
|
{
|
|
u32 pll;
|
|
u32 ssc;
|
|
|
|
gl9750_wt_on(host);
|
|
pll = sdhci_readl(host, SDHCI_GLI_9750_PLL);
|
|
ssc = sdhci_readl(host, SDHCI_GLI_9750_PLLSSC);
|
|
pll &= ~(SDHCI_GLI_9750_PLLSSC_STEP |
|
|
SDHCI_GLI_9750_PLLSSC_EN);
|
|
ssc &= ~SDHCI_GLI_9750_PLLSSC_PPM;
|
|
pll |= FIELD_PREP(SDHCI_GLI_9750_PLLSSC_STEP, step) |
|
|
FIELD_PREP(SDHCI_GLI_9750_PLLSSC_EN, enable);
|
|
ssc |= FIELD_PREP(SDHCI_GLI_9750_PLLSSC_PPM, ppm);
|
|
sdhci_writel(host, ssc, SDHCI_GLI_9750_PLLSSC);
|
|
sdhci_writel(host, pll, SDHCI_GLI_9750_PLL);
|
|
gl9750_wt_off(host);
|
|
}
|
|
|
|
static void gl9750_set_ssc_pll_205mhz(struct sdhci_host *host)
|
|
{
|
|
bool enable = gl9750_ssc_enable(host);
|
|
|
|
/* set pll to 205MHz and ssc */
|
|
gl9750_set_ssc(host, enable, 0xF, 0x5A1D);
|
|
gl9750_set_pll(host, 0x1, 0x246, 0x0);
|
|
}
|
|
|
|
static void gl9750_set_ssc_pll_100mhz(struct sdhci_host *host)
|
|
{
|
|
bool enable = gl9750_ssc_enable(host);
|
|
|
|
/* set pll to 100MHz and ssc */
|
|
gl9750_set_ssc(host, enable, 0xE, 0x51EC);
|
|
gl9750_set_pll(host, 0x1, 0x244, 0x1);
|
|
}
|
|
|
|
static void gl9750_set_ssc_pll_50mhz(struct sdhci_host *host)
|
|
{
|
|
bool enable = gl9750_ssc_enable(host);
|
|
|
|
/* set pll to 50MHz and ssc */
|
|
gl9750_set_ssc(host, enable, 0xE, 0x51EC);
|
|
gl9750_set_pll(host, 0x1, 0x244, 0x3);
|
|
}
|
|
|
|
static void sdhci_gl9750_set_clock(struct sdhci_host *host, unsigned int clock)
|
|
{
|
|
struct mmc_ios *ios = &host->mmc->ios;
|
|
u16 clk;
|
|
|
|
host->mmc->actual_clock = 0;
|
|
|
|
gl9750_disable_ssc_pll(host);
|
|
sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
|
|
|
|
if (clock == 0)
|
|
return;
|
|
|
|
clk = sdhci_calc_clk(host, clock, &host->mmc->actual_clock);
|
|
if (clock == 200000000 && ios->timing == MMC_TIMING_UHS_SDR104) {
|
|
host->mmc->actual_clock = 205000000;
|
|
gl9750_set_ssc_pll_205mhz(host);
|
|
} else if (clock == 100000000) {
|
|
gl9750_set_ssc_pll_100mhz(host);
|
|
} else if (clock == 50000000) {
|
|
gl9750_set_ssc_pll_50mhz(host);
|
|
}
|
|
|
|
sdhci_enable_clk(host, clk);
|
|
}
|
|
|
|
static void gl9750_hw_setting(struct sdhci_host *host)
|
|
{
|
|
struct sdhci_pci_slot *slot = sdhci_priv(host);
|
|
struct pci_dev *pdev;
|
|
int aer;
|
|
u32 value;
|
|
|
|
pdev = slot->chip->pdev;
|
|
|
|
gl9750_wt_on(host);
|
|
|
|
value = sdhci_readl(host, SDHCI_GLI_9750_CFG2);
|
|
value &= ~SDHCI_GLI_9750_CFG2_L1DLY;
|
|
/* set ASPM L1 entry delay to 7.9us */
|
|
value |= FIELD_PREP(SDHCI_GLI_9750_CFG2_L1DLY,
|
|
GLI_9750_CFG2_L1DLY_VALUE);
|
|
sdhci_writel(host, value, SDHCI_GLI_9750_CFG2);
|
|
|
|
/* toggle PM state to allow GL9750 to enter ASPM L1.2 */
|
|
pci_set_power_state(pdev, PCI_D3hot);
|
|
pci_set_power_state(pdev, PCI_D0);
|
|
|
|
/* mask the replay timer timeout of AER */
|
|
aer = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_ERR);
|
|
if (aer) {
|
|
pci_read_config_dword(pdev, aer + PCI_ERR_COR_MASK, &value);
|
|
value |= PCI_ERR_COR_REP_TIMER;
|
|
pci_write_config_dword(pdev, aer + PCI_ERR_COR_MASK, value);
|
|
}
|
|
|
|
gl9750_wt_off(host);
|
|
}
|
|
|
|
static void gli_pcie_enable_msi(struct sdhci_pci_slot *slot)
|
|
{
|
|
int ret;
|
|
|
|
ret = pci_alloc_irq_vectors(slot->chip->pdev, 1, 1,
|
|
PCI_IRQ_MSI | PCI_IRQ_MSIX);
|
|
if (ret < 0) {
|
|
pr_warn("%s: enable PCI MSI failed, error=%d\n",
|
|
mmc_hostname(slot->host->mmc), ret);
|
|
return;
|
|
}
|
|
|
|
slot->host->irq = pci_irq_vector(slot->chip->pdev, 0);
|
|
}
|
|
|
|
static inline void gl9755_wt_on(struct pci_dev *pdev)
|
|
{
|
|
u32 wt_value;
|
|
u32 wt_enable;
|
|
|
|
pci_read_config_dword(pdev, PCI_GLI_9755_WT, &wt_value);
|
|
wt_enable = FIELD_GET(PCI_GLI_9755_WT_EN, wt_value);
|
|
|
|
if (wt_enable == GLI_9755_WT_EN_ON)
|
|
return;
|
|
|
|
wt_value &= ~PCI_GLI_9755_WT_EN;
|
|
wt_value |= FIELD_PREP(PCI_GLI_9755_WT_EN, GLI_9755_WT_EN_ON);
|
|
|
|
pci_write_config_dword(pdev, PCI_GLI_9755_WT, wt_value);
|
|
}
|
|
|
|
static inline void gl9755_wt_off(struct pci_dev *pdev)
|
|
{
|
|
u32 wt_value;
|
|
u32 wt_enable;
|
|
|
|
pci_read_config_dword(pdev, PCI_GLI_9755_WT, &wt_value);
|
|
wt_enable = FIELD_GET(PCI_GLI_9755_WT_EN, wt_value);
|
|
|
|
if (wt_enable == GLI_9755_WT_EN_OFF)
|
|
return;
|
|
|
|
wt_value &= ~PCI_GLI_9755_WT_EN;
|
|
wt_value |= FIELD_PREP(PCI_GLI_9755_WT_EN, GLI_9755_WT_EN_OFF);
|
|
|
|
pci_write_config_dword(pdev, PCI_GLI_9755_WT, wt_value);
|
|
}
|
|
|
|
static void gl9755_disable_ssc_pll(struct pci_dev *pdev)
|
|
{
|
|
u32 pll;
|
|
|
|
gl9755_wt_on(pdev);
|
|
pci_read_config_dword(pdev, PCI_GLI_9755_PLL, &pll);
|
|
pll &= ~(PCI_GLI_9755_PLL_DIR | PCI_GLI_9755_PLLSSC_EN);
|
|
pci_write_config_dword(pdev, PCI_GLI_9755_PLL, pll);
|
|
gl9755_wt_off(pdev);
|
|
}
|
|
|
|
static void gl9755_set_pll(struct pci_dev *pdev, u8 dir, u16 ldiv, u8 pdiv)
|
|
{
|
|
u32 pll;
|
|
|
|
gl9755_wt_on(pdev);
|
|
pci_read_config_dword(pdev, PCI_GLI_9755_PLL, &pll);
|
|
pll &= ~(PCI_GLI_9755_PLL_LDIV |
|
|
PCI_GLI_9755_PLL_PDIV |
|
|
PCI_GLI_9755_PLL_DIR);
|
|
pll |= FIELD_PREP(PCI_GLI_9755_PLL_LDIV, ldiv) |
|
|
FIELD_PREP(PCI_GLI_9755_PLL_PDIV, pdiv) |
|
|
FIELD_PREP(PCI_GLI_9755_PLL_DIR, dir);
|
|
pci_write_config_dword(pdev, PCI_GLI_9755_PLL, pll);
|
|
gl9755_wt_off(pdev);
|
|
|
|
/* wait for pll stable */
|
|
mdelay(1);
|
|
}
|
|
|
|
static bool gl9755_ssc_enable(struct pci_dev *pdev)
|
|
{
|
|
u32 misc;
|
|
u8 off;
|
|
|
|
gl9755_wt_on(pdev);
|
|
pci_read_config_dword(pdev, PCI_GLI_9755_MISC, &misc);
|
|
off = FIELD_GET(PCI_GLI_9755_MISC_SSC_OFF, misc);
|
|
gl9755_wt_off(pdev);
|
|
|
|
return !off;
|
|
}
|
|
|
|
static void gl9755_set_ssc(struct pci_dev *pdev, u8 enable, u8 step, u16 ppm)
|
|
{
|
|
u32 pll;
|
|
u32 ssc;
|
|
|
|
gl9755_wt_on(pdev);
|
|
pci_read_config_dword(pdev, PCI_GLI_9755_PLL, &pll);
|
|
pci_read_config_dword(pdev, PCI_GLI_9755_PLLSSC, &ssc);
|
|
pll &= ~(PCI_GLI_9755_PLLSSC_STEP |
|
|
PCI_GLI_9755_PLLSSC_EN);
|
|
ssc &= ~PCI_GLI_9755_PLLSSC_PPM;
|
|
pll |= FIELD_PREP(PCI_GLI_9755_PLLSSC_STEP, step) |
|
|
FIELD_PREP(PCI_GLI_9755_PLLSSC_EN, enable);
|
|
ssc |= FIELD_PREP(PCI_GLI_9755_PLLSSC_PPM, ppm);
|
|
pci_write_config_dword(pdev, PCI_GLI_9755_PLLSSC, ssc);
|
|
pci_write_config_dword(pdev, PCI_GLI_9755_PLL, pll);
|
|
gl9755_wt_off(pdev);
|
|
}
|
|
|
|
static void gl9755_set_ssc_pll_205mhz(struct pci_dev *pdev)
|
|
{
|
|
bool enable = gl9755_ssc_enable(pdev);
|
|
|
|
/* set pll to 205MHz and ssc */
|
|
gl9755_set_ssc(pdev, enable, 0xF, 0x5A1D);
|
|
gl9755_set_pll(pdev, 0x1, 0x246, 0x0);
|
|
}
|
|
|
|
static void gl9755_set_ssc_pll_100mhz(struct pci_dev *pdev)
|
|
{
|
|
bool enable = gl9755_ssc_enable(pdev);
|
|
|
|
/* set pll to 100MHz and ssc */
|
|
gl9755_set_ssc(pdev, enable, 0xE, 0x51EC);
|
|
gl9755_set_pll(pdev, 0x1, 0x244, 0x1);
|
|
}
|
|
|
|
static void gl9755_set_ssc_pll_50mhz(struct pci_dev *pdev)
|
|
{
|
|
bool enable = gl9755_ssc_enable(pdev);
|
|
|
|
/* set pll to 50MHz and ssc */
|
|
gl9755_set_ssc(pdev, enable, 0xE, 0x51EC);
|
|
gl9755_set_pll(pdev, 0x1, 0x244, 0x3);
|
|
}
|
|
|
|
static void sdhci_gl9755_set_clock(struct sdhci_host *host, unsigned int clock)
|
|
{
|
|
struct sdhci_pci_slot *slot = sdhci_priv(host);
|
|
struct mmc_ios *ios = &host->mmc->ios;
|
|
struct pci_dev *pdev;
|
|
u16 clk;
|
|
|
|
pdev = slot->chip->pdev;
|
|
host->mmc->actual_clock = 0;
|
|
|
|
gl9755_disable_ssc_pll(pdev);
|
|
sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
|
|
|
|
if (clock == 0)
|
|
return;
|
|
|
|
clk = sdhci_calc_clk(host, clock, &host->mmc->actual_clock);
|
|
if (clock == 200000000 && ios->timing == MMC_TIMING_UHS_SDR104) {
|
|
host->mmc->actual_clock = 205000000;
|
|
gl9755_set_ssc_pll_205mhz(pdev);
|
|
} else if (clock == 100000000) {
|
|
gl9755_set_ssc_pll_100mhz(pdev);
|
|
} else if (clock == 50000000) {
|
|
gl9755_set_ssc_pll_50mhz(pdev);
|
|
}
|
|
|
|
sdhci_enable_clk(host, clk);
|
|
}
|
|
|
|
static void gl9755_hw_setting(struct sdhci_pci_slot *slot)
|
|
{
|
|
struct pci_dev *pdev = slot->chip->pdev;
|
|
int aer;
|
|
u32 value;
|
|
|
|
gl9755_wt_on(pdev);
|
|
|
|
pci_read_config_dword(pdev, PCI_GLI_9755_PECONF, &value);
|
|
/*
|
|
* Apple ARM64 platforms using these chips may have
|
|
* inverted CD/WP detection.
|
|
*/
|
|
if (of_property_read_bool(pdev->dev.of_node, "cd-inverted"))
|
|
value |= PCI_GLI_9755_INVERT_CD;
|
|
if (of_property_read_bool(pdev->dev.of_node, "wp-inverted"))
|
|
value |= PCI_GLI_9755_INVERT_WP;
|
|
value &= ~PCI_GLI_9755_LFCLK;
|
|
value &= ~PCI_GLI_9755_DMACLK;
|
|
pci_write_config_dword(pdev, PCI_GLI_9755_PECONF, value);
|
|
|
|
/* enable short circuit protection */
|
|
pci_read_config_dword(pdev, PCI_GLI_9755_SerDes, &value);
|
|
value &= ~PCI_GLI_9755_SCP_DIS;
|
|
pci_write_config_dword(pdev, PCI_GLI_9755_SerDes, value);
|
|
|
|
pci_read_config_dword(pdev, PCI_GLI_9755_CFG2, &value);
|
|
value &= ~PCI_GLI_9755_CFG2_L1DLY;
|
|
/* set ASPM L1 entry delay to 7.9us */
|
|
value |= FIELD_PREP(PCI_GLI_9755_CFG2_L1DLY,
|
|
GLI_9755_CFG2_L1DLY_VALUE);
|
|
pci_write_config_dword(pdev, PCI_GLI_9755_CFG2, value);
|
|
|
|
/* toggle PM state to allow GL9755 to enter ASPM L1.2 */
|
|
pci_set_power_state(pdev, PCI_D3hot);
|
|
pci_set_power_state(pdev, PCI_D0);
|
|
|
|
/* mask the replay timer timeout of AER */
|
|
aer = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_ERR);
|
|
if (aer) {
|
|
pci_read_config_dword(pdev, aer + PCI_ERR_COR_MASK, &value);
|
|
value |= PCI_ERR_COR_REP_TIMER;
|
|
pci_write_config_dword(pdev, aer + PCI_ERR_COR_MASK, value);
|
|
}
|
|
|
|
gl9755_wt_off(pdev);
|
|
}
|
|
|
|
static inline void gl9767_vhs_read(struct pci_dev *pdev)
|
|
{
|
|
u32 vhs_enable;
|
|
u32 vhs_value;
|
|
|
|
pci_read_config_dword(pdev, PCIE_GLI_9767_VHS, &vhs_value);
|
|
vhs_enable = FIELD_GET(GLI_9767_VHS_REV, vhs_value);
|
|
|
|
if (vhs_enable == GLI_9767_VHS_REV_R)
|
|
return;
|
|
|
|
vhs_value &= ~GLI_9767_VHS_REV;
|
|
vhs_value |= FIELD_PREP(GLI_9767_VHS_REV, GLI_9767_VHS_REV_R);
|
|
|
|
pci_write_config_dword(pdev, PCIE_GLI_9767_VHS, vhs_value);
|
|
}
|
|
|
|
static inline void gl9767_vhs_write(struct pci_dev *pdev)
|
|
{
|
|
u32 vhs_enable;
|
|
u32 vhs_value;
|
|
|
|
pci_read_config_dword(pdev, PCIE_GLI_9767_VHS, &vhs_value);
|
|
vhs_enable = FIELD_GET(GLI_9767_VHS_REV, vhs_value);
|
|
|
|
if (vhs_enable == GLI_9767_VHS_REV_W)
|
|
return;
|
|
|
|
vhs_value &= ~GLI_9767_VHS_REV;
|
|
vhs_value |= FIELD_PREP(GLI_9767_VHS_REV, GLI_9767_VHS_REV_W);
|
|
|
|
pci_write_config_dword(pdev, PCIE_GLI_9767_VHS, vhs_value);
|
|
}
|
|
|
|
static bool gl9767_ssc_enable(struct pci_dev *pdev)
|
|
{
|
|
u32 value;
|
|
u8 enable;
|
|
|
|
gl9767_vhs_write(pdev);
|
|
|
|
pci_read_config_dword(pdev, PCIE_GLI_9767_COM_MAILBOX, &value);
|
|
enable = FIELD_GET(PCIE_GLI_9767_COM_MAILBOX_SSC_EN, value);
|
|
|
|
gl9767_vhs_read(pdev);
|
|
|
|
return enable;
|
|
}
|
|
|
|
static void gl9767_set_ssc(struct pci_dev *pdev, u8 enable, u8 step, u16 ppm)
|
|
{
|
|
u32 pll;
|
|
u32 ssc;
|
|
|
|
gl9767_vhs_write(pdev);
|
|
|
|
pci_read_config_dword(pdev, PCIE_GLI_9767_SD_PLL_CTL, &pll);
|
|
pci_read_config_dword(pdev, PCIE_GLI_9767_SD_PLL_CTL2, &ssc);
|
|
pll &= ~(PCIE_GLI_9767_SD_PLL_CTL_SSC_STEP_SETTING |
|
|
PCIE_GLI_9767_SD_PLL_CTL_SSC_EN);
|
|
ssc &= ~PCIE_GLI_9767_SD_PLL_CTL2_PLLSSC_PPM;
|
|
pll |= FIELD_PREP(PCIE_GLI_9767_SD_PLL_CTL_SSC_STEP_SETTING, step) |
|
|
FIELD_PREP(PCIE_GLI_9767_SD_PLL_CTL_SSC_EN, enable);
|
|
ssc |= FIELD_PREP(PCIE_GLI_9767_SD_PLL_CTL2_PLLSSC_PPM, ppm);
|
|
pci_write_config_dword(pdev, PCIE_GLI_9767_SD_PLL_CTL2, ssc);
|
|
pci_write_config_dword(pdev, PCIE_GLI_9767_SD_PLL_CTL, pll);
|
|
|
|
gl9767_vhs_read(pdev);
|
|
}
|
|
|
|
static void gl9767_set_pll(struct pci_dev *pdev, u8 dir, u16 ldiv, u8 pdiv)
|
|
{
|
|
u32 pll;
|
|
|
|
gl9767_vhs_write(pdev);
|
|
|
|
pci_read_config_dword(pdev, PCIE_GLI_9767_SD_PLL_CTL, &pll);
|
|
pll &= ~(PCIE_GLI_9767_SD_PLL_CTL_PLL_LDIV |
|
|
PCIE_GLI_9767_SD_PLL_CTL_PLL_PDIV |
|
|
PCIE_GLI_9767_SD_PLL_CTL_PLL_DIR_EN);
|
|
pll |= FIELD_PREP(PCIE_GLI_9767_SD_PLL_CTL_PLL_LDIV, ldiv) |
|
|
FIELD_PREP(PCIE_GLI_9767_SD_PLL_CTL_PLL_PDIV, pdiv) |
|
|
FIELD_PREP(PCIE_GLI_9767_SD_PLL_CTL_PLL_DIR_EN, dir);
|
|
pci_write_config_dword(pdev, PCIE_GLI_9767_SD_PLL_CTL, pll);
|
|
|
|
gl9767_vhs_read(pdev);
|
|
|
|
/* wait for pll stable */
|
|
usleep_range(1000, 1100);
|
|
}
|
|
|
|
static void gl9767_set_ssc_pll_205mhz(struct pci_dev *pdev)
|
|
{
|
|
bool enable = gl9767_ssc_enable(pdev);
|
|
|
|
/* set pll to 205MHz and ssc */
|
|
gl9767_set_ssc(pdev, enable, 0x1F, 0xF5C3);
|
|
gl9767_set_pll(pdev, 0x1, 0x246, 0x0);
|
|
}
|
|
|
|
static void gl9767_disable_ssc_pll(struct pci_dev *pdev)
|
|
{
|
|
u32 pll;
|
|
|
|
gl9767_vhs_write(pdev);
|
|
|
|
pci_read_config_dword(pdev, PCIE_GLI_9767_SD_PLL_CTL, &pll);
|
|
pll &= ~(PCIE_GLI_9767_SD_PLL_CTL_PLL_DIR_EN | PCIE_GLI_9767_SD_PLL_CTL_SSC_EN);
|
|
pci_write_config_dword(pdev, PCIE_GLI_9767_SD_PLL_CTL, pll);
|
|
|
|
gl9767_vhs_read(pdev);
|
|
}
|
|
|
|
static void sdhci_gl9767_set_clock(struct sdhci_host *host, unsigned int clock)
|
|
{
|
|
struct sdhci_pci_slot *slot = sdhci_priv(host);
|
|
struct mmc_ios *ios = &host->mmc->ios;
|
|
struct pci_dev *pdev;
|
|
u32 value;
|
|
u16 clk;
|
|
|
|
pdev = slot->chip->pdev;
|
|
host->mmc->actual_clock = 0;
|
|
|
|
gl9767_vhs_write(pdev);
|
|
|
|
pci_read_config_dword(pdev, PCIE_GLI_9767_CFG, &value);
|
|
value |= PCIE_GLI_9767_CFG_LOW_PWR_OFF;
|
|
pci_write_config_dword(pdev, PCIE_GLI_9767_CFG, value);
|
|
|
|
gl9767_disable_ssc_pll(pdev);
|
|
sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
|
|
|
|
if (clock == 0)
|
|
return;
|
|
|
|
clk = sdhci_calc_clk(host, clock, &host->mmc->actual_clock);
|
|
if (clock == 200000000 && ios->timing == MMC_TIMING_UHS_SDR104) {
|
|
host->mmc->actual_clock = 205000000;
|
|
gl9767_set_ssc_pll_205mhz(pdev);
|
|
}
|
|
|
|
sdhci_enable_clk(host, clk);
|
|
|
|
pci_read_config_dword(pdev, PCIE_GLI_9767_CFG, &value);
|
|
value &= ~PCIE_GLI_9767_CFG_LOW_PWR_OFF;
|
|
pci_write_config_dword(pdev, PCIE_GLI_9767_CFG, value);
|
|
|
|
gl9767_vhs_read(pdev);
|
|
}
|
|
|
|
static void gli_set_9767(struct sdhci_host *host)
|
|
{
|
|
u32 value;
|
|
|
|
value = sdhci_readl(host, SDHCI_GLI_9767_GM_BURST_SIZE);
|
|
value &= ~SDHCI_GLI_9767_GM_BURST_SIZE_AXI_ALWAYS_SET;
|
|
sdhci_writel(host, value, SDHCI_GLI_9767_GM_BURST_SIZE);
|
|
}
|
|
|
|
static void gl9767_hw_setting(struct sdhci_pci_slot *slot)
|
|
{
|
|
struct pci_dev *pdev = slot->chip->pdev;
|
|
u32 value;
|
|
|
|
gl9767_vhs_write(pdev);
|
|
|
|
pci_read_config_dword(pdev, PCIE_GLI_9767_PWR_MACRO_CTL, &value);
|
|
value &= ~(PCIE_GLI_9767_PWR_MACRO_CTL_LOW_VOLTAGE |
|
|
PCIE_GLI_9767_PWR_MACRO_CTL_LD0_LOW_OUTPUT_VOLTAGE |
|
|
PCIE_GLI_9767_PWR_MACRO_CTL_RCLK_AMPLITUDE_CTL);
|
|
|
|
value |= PCIE_GLI_9767_PWR_MACRO_CTL_LOW_VOLTAGE |
|
|
FIELD_PREP(PCIE_GLI_9767_PWR_MACRO_CTL_LD0_LOW_OUTPUT_VOLTAGE,
|
|
PCIE_GLI_9767_PWR_MACRO_CTL_LD0_LOW_OUTPUT_VOLTAGE_VALUE) |
|
|
FIELD_PREP(PCIE_GLI_9767_PWR_MACRO_CTL_RCLK_AMPLITUDE_CTL,
|
|
PCIE_GLI_9767_PWR_MACRO_CTL_RCLK_AMPLITUDE_CTL_VALUE);
|
|
pci_write_config_dword(pdev, PCIE_GLI_9767_PWR_MACRO_CTL, value);
|
|
|
|
pci_read_config_dword(pdev, PCIE_GLI_9767_SCR, &value);
|
|
value &= ~(PCIE_GLI_9767_SCR_SYSTEM_CLK_SELECT_MODE0 |
|
|
PCIE_GLI_9767_SCR_SYSTEM_CLK_SELECT_MODE1 |
|
|
PCIE_GLI_9767_SCR_CFG_RST_DATA_LINK_DOWN);
|
|
|
|
value |= PCIE_GLI_9767_SCR_AUTO_AXI_W_BURST |
|
|
PCIE_GLI_9767_SCR_AUTO_AXI_R_BURST |
|
|
PCIE_GLI_9767_SCR_AXI_REQ |
|
|
PCIE_GLI_9767_SCR_CARD_DET_PWR_SAVING_EN |
|
|
PCIE_GLI_9767_SCR_CORE_PWR_D3_OFF;
|
|
pci_write_config_dword(pdev, PCIE_GLI_9767_SCR, value);
|
|
|
|
gl9767_vhs_read(pdev);
|
|
}
|
|
|
|
static void sdhci_gl9767_reset(struct sdhci_host *host, u8 mask)
|
|
{
|
|
sdhci_reset(host, mask);
|
|
gli_set_9767(host);
|
|
}
|
|
|
|
static int gl9767_init_sd_express(struct mmc_host *mmc, struct mmc_ios *ios)
|
|
{
|
|
struct sdhci_host *host = mmc_priv(mmc);
|
|
struct sdhci_pci_slot *slot = sdhci_priv(host);
|
|
struct pci_dev *pdev;
|
|
u32 value;
|
|
int i;
|
|
|
|
pdev = slot->chip->pdev;
|
|
|
|
if (mmc->ops->get_ro(mmc)) {
|
|
mmc->ios.timing &= ~(MMC_TIMING_SD_EXP | MMC_TIMING_SD_EXP_1_2V);
|
|
return 0;
|
|
}
|
|
|
|
gl9767_vhs_write(pdev);
|
|
|
|
pci_read_config_dword(pdev, PCIE_GLI_9767_COMBO_MUX_CTL, &value);
|
|
value &= ~(PCIE_GLI_9767_COMBO_MUX_CTL_RST_EN | PCIE_GLI_9767_COMBO_MUX_CTL_WAIT_PERST_EN);
|
|
pci_write_config_dword(pdev, PCIE_GLI_9767_COMBO_MUX_CTL, value);
|
|
|
|
pci_read_config_dword(pdev, PCIE_GLI_9767_SD_DATA_MULTI_CTL, &value);
|
|
value &= ~PCIE_GLI_9767_SD_DATA_MULTI_CTL_DISCONNECT_TIME;
|
|
value |= FIELD_PREP(PCIE_GLI_9767_SD_DATA_MULTI_CTL_DISCONNECT_TIME,
|
|
PCIE_GLI_9767_SD_DATA_MULTI_CTL_DISCONNECT_TIME_VALUE);
|
|
pci_write_config_dword(pdev, PCIE_GLI_9767_SD_DATA_MULTI_CTL, value);
|
|
|
|
pci_read_config_dword(pdev, PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2, &value);
|
|
value |= PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2_SDEI_COMPLETE;
|
|
pci_write_config_dword(pdev, PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2, value);
|
|
|
|
pci_read_config_dword(pdev, PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_EN_REG2, &value);
|
|
value |= PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_EN_REG2_SDEI_COMPLETE_STATUS_EN;
|
|
pci_write_config_dword(pdev, PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_EN_REG2, value);
|
|
|
|
pci_read_config_dword(pdev, PCIE_GLI_9767_NORMAL_ERR_INT_SIGNAL_EN_REG2, &value);
|
|
value |= PCIE_GLI_9767_NORMAL_ERR_INT_SIGNAL_EN_REG2_SDEI_COMPLETE_SIGNAL_EN;
|
|
pci_write_config_dword(pdev, PCIE_GLI_9767_NORMAL_ERR_INT_SIGNAL_EN_REG2, value);
|
|
|
|
pci_read_config_dword(pdev, PCIE_GLI_9767_CFG, &value);
|
|
value |= PCIE_GLI_9767_CFG_LOW_PWR_OFF;
|
|
pci_write_config_dword(pdev, PCIE_GLI_9767_CFG, value);
|
|
|
|
value = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
|
|
value &= ~(SDHCI_CLOCK_CARD_EN | SDHCI_CLOCK_PLL_EN);
|
|
sdhci_writew(host, value, SDHCI_CLOCK_CONTROL);
|
|
|
|
value = sdhci_readb(host, SDHCI_POWER_CONTROL);
|
|
value |= (SDHCI_VDD2_POWER_180 | SDHCI_VDD2_POWER_ON);
|
|
sdhci_writeb(host, value, SDHCI_POWER_CONTROL);
|
|
|
|
pci_read_config_dword(pdev, PCIE_GLI_9767_SD_EXPRESS_CTL, &value);
|
|
value |= PCIE_GLI_9767_SD_EXPRESS_CTL_SDEI_EXE;
|
|
pci_write_config_dword(pdev, PCIE_GLI_9767_SD_EXPRESS_CTL, value);
|
|
|
|
for (i = 0; i < 2; i++) {
|
|
usleep_range(10000, 10100);
|
|
pci_read_config_dword(pdev, PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2, &value);
|
|
if (value & PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2_SDEI_COMPLETE) {
|
|
pci_write_config_dword(pdev, PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2,
|
|
value);
|
|
break;
|
|
}
|
|
}
|
|
|
|
pci_read_config_dword(pdev, PCIE_GLI_9767_SDHC_CAP, &value);
|
|
if (value & PCIE_GLI_9767_SDHC_CAP_SDEI_RESULT) {
|
|
pci_read_config_dword(pdev, PCIE_GLI_9767_SD_EXPRESS_CTL, &value);
|
|
value |= PCIE_GLI_9767_SD_EXPRESS_CTL_SD_EXPRESS_MODE;
|
|
pci_write_config_dword(pdev, PCIE_GLI_9767_SD_EXPRESS_CTL, value);
|
|
} else {
|
|
mmc->ios.timing &= ~(MMC_TIMING_SD_EXP | MMC_TIMING_SD_EXP_1_2V);
|
|
|
|
value = sdhci_readb(host, SDHCI_POWER_CONTROL);
|
|
value &= ~(SDHCI_VDD2_POWER_180 | SDHCI_VDD2_POWER_ON);
|
|
sdhci_writeb(host, value, SDHCI_POWER_CONTROL);
|
|
|
|
value = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
|
|
value |= (SDHCI_CLOCK_CARD_EN | SDHCI_CLOCK_PLL_EN);
|
|
sdhci_writew(host, value, SDHCI_CLOCK_CONTROL);
|
|
}
|
|
|
|
gl9767_vhs_read(pdev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gli_probe_slot_gl9750(struct sdhci_pci_slot *slot)
|
|
{
|
|
struct sdhci_host *host = slot->host;
|
|
|
|
gl9750_hw_setting(host);
|
|
gli_pcie_enable_msi(slot);
|
|
slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
|
|
sdhci_enable_v4_mode(host);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gli_probe_slot_gl9755(struct sdhci_pci_slot *slot)
|
|
{
|
|
struct sdhci_host *host = slot->host;
|
|
|
|
gl9755_hw_setting(slot);
|
|
gli_pcie_enable_msi(slot);
|
|
slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
|
|
sdhci_enable_v4_mode(host);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gli_probe_slot_gl9767(struct sdhci_pci_slot *slot)
|
|
{
|
|
struct sdhci_host *host = slot->host;
|
|
|
|
gli_set_9767(host);
|
|
gl9767_hw_setting(slot);
|
|
gli_pcie_enable_msi(slot);
|
|
slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
|
|
host->mmc->caps2 |= MMC_CAP2_SD_EXP;
|
|
host->mmc_host_ops.init_sd_express = gl9767_init_sd_express;
|
|
sdhci_enable_v4_mode(host);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sdhci_gli_voltage_switch(struct sdhci_host *host)
|
|
{
|
|
/*
|
|
* According to Section 3.6.1 signal voltage switch procedure in
|
|
* SD Host Controller Simplified Spec. 4.20, steps 6~8 are as
|
|
* follows:
|
|
* (6) Set 1.8V Signal Enable in the Host Control 2 register.
|
|
* (7) Wait 5ms. 1.8V voltage regulator shall be stable within this
|
|
* period.
|
|
* (8) If 1.8V Signal Enable is cleared by Host Controller, go to
|
|
* step (12).
|
|
*
|
|
* Wait 5ms after set 1.8V signal enable in Host Control 2 register
|
|
* to ensure 1.8V signal enable bit is set by GL9750/GL9755.
|
|
*
|
|
* ...however, the controller in the NUC10i3FNK4 (a 9755) requires
|
|
* slightly longer than 5ms before the control register reports that
|
|
* 1.8V is ready, and far longer still before the card will actually
|
|
* work reliably.
|
|
*/
|
|
usleep_range(100000, 110000);
|
|
}
|
|
|
|
static void sdhci_gl9767_voltage_switch(struct sdhci_host *host)
|
|
{
|
|
/*
|
|
* According to Section 3.6.1 signal voltage switch procedure in
|
|
* SD Host Controller Simplified Spec. 4.20, steps 6~8 are as
|
|
* follows:
|
|
* (6) Set 1.8V Signal Enable in the Host Control 2 register.
|
|
* (7) Wait 5ms. 1.8V voltage regulator shall be stable within this
|
|
* period.
|
|
* (8) If 1.8V Signal Enable is cleared by Host Controller, go to
|
|
* step (12).
|
|
*
|
|
* Wait 5ms after set 1.8V signal enable in Host Control 2 register
|
|
* to ensure 1.8V signal enable bit is set by GL9767.
|
|
*
|
|
*/
|
|
usleep_range(5000, 5500);
|
|
}
|
|
|
|
static void sdhci_gl9750_reset(struct sdhci_host *host, u8 mask)
|
|
{
|
|
sdhci_reset(host, mask);
|
|
gli_set_9750(host);
|
|
}
|
|
|
|
static u32 sdhci_gl9750_readl(struct sdhci_host *host, int reg)
|
|
{
|
|
u32 value;
|
|
|
|
value = readl(host->ioaddr + reg);
|
|
if (unlikely(reg == SDHCI_MAX_CURRENT && !(value & 0xff)))
|
|
value |= 0xc8;
|
|
|
|
return value;
|
|
}
|
|
|
|
static void gl9763e_hs400_enhanced_strobe(struct mmc_host *mmc,
|
|
struct mmc_ios *ios)
|
|
{
|
|
struct sdhci_host *host = mmc_priv(mmc);
|
|
u32 val;
|
|
|
|
val = sdhci_readl(host, SDHCI_GLI_9763E_HS400_ES_REG);
|
|
if (ios->enhanced_strobe)
|
|
val |= SDHCI_GLI_9763E_HS400_ES_BIT;
|
|
else
|
|
val &= ~SDHCI_GLI_9763E_HS400_ES_BIT;
|
|
|
|
sdhci_writel(host, val, SDHCI_GLI_9763E_HS400_ES_REG);
|
|
}
|
|
|
|
static void gl9763e_set_low_power_negotiation(struct sdhci_pci_slot *slot,
|
|
bool enable)
|
|
{
|
|
struct pci_dev *pdev = slot->chip->pdev;
|
|
u32 value;
|
|
|
|
pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value);
|
|
value &= ~GLI_9763E_VHS_REV;
|
|
value |= FIELD_PREP(GLI_9763E_VHS_REV, GLI_9763E_VHS_REV_W);
|
|
pci_write_config_dword(pdev, PCIE_GLI_9763E_VHS, value);
|
|
|
|
pci_read_config_dword(pdev, PCIE_GLI_9763E_CFG, &value);
|
|
|
|
if (enable)
|
|
value &= ~GLI_9763E_CFG_LPSN_DIS;
|
|
else
|
|
value |= GLI_9763E_CFG_LPSN_DIS;
|
|
|
|
pci_write_config_dword(pdev, PCIE_GLI_9763E_CFG, value);
|
|
|
|
pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value);
|
|
value &= ~GLI_9763E_VHS_REV;
|
|
value |= FIELD_PREP(GLI_9763E_VHS_REV, GLI_9763E_VHS_REV_R);
|
|
pci_write_config_dword(pdev, PCIE_GLI_9763E_VHS, value);
|
|
}
|
|
|
|
static void sdhci_set_gl9763e_signaling(struct sdhci_host *host,
|
|
unsigned int timing)
|
|
{
|
|
u16 ctrl_2;
|
|
|
|
ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
|
|
ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
|
|
if (timing == MMC_TIMING_MMC_HS200)
|
|
ctrl_2 |= SDHCI_CTRL_UHS_SDR104;
|
|
else if (timing == MMC_TIMING_MMC_HS)
|
|
ctrl_2 |= SDHCI_CTRL_UHS_SDR25;
|
|
else if (timing == MMC_TIMING_MMC_DDR52)
|
|
ctrl_2 |= SDHCI_CTRL_UHS_DDR50;
|
|
else if (timing == MMC_TIMING_MMC_HS400)
|
|
ctrl_2 |= SDHCI_GLI_9763E_CTRL_HS400;
|
|
|
|
sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
|
|
}
|
|
|
|
static void sdhci_gl9763e_dumpregs(struct mmc_host *mmc)
|
|
{
|
|
sdhci_dumpregs(mmc_priv(mmc));
|
|
}
|
|
|
|
static void sdhci_gl9763e_cqe_pre_enable(struct mmc_host *mmc)
|
|
{
|
|
struct cqhci_host *cq_host = mmc->cqe_private;
|
|
u32 value;
|
|
|
|
value = cqhci_readl(cq_host, CQHCI_CFG);
|
|
value |= CQHCI_ENABLE;
|
|
cqhci_writel(cq_host, value, CQHCI_CFG);
|
|
}
|
|
|
|
static void sdhci_gl9763e_cqe_enable(struct mmc_host *mmc)
|
|
{
|
|
struct sdhci_host *host = mmc_priv(mmc);
|
|
|
|
sdhci_writew(host, GLI_9763E_CQE_TRNS_MODE, SDHCI_TRANSFER_MODE);
|
|
sdhci_cqe_enable(mmc);
|
|
}
|
|
|
|
static u32 sdhci_gl9763e_cqhci_irq(struct sdhci_host *host, u32 intmask)
|
|
{
|
|
int cmd_error = 0;
|
|
int data_error = 0;
|
|
|
|
if (!sdhci_cqe_irq(host, intmask, &cmd_error, &data_error))
|
|
return intmask;
|
|
|
|
cqhci_irq(host->mmc, intmask, cmd_error, data_error);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sdhci_gl9763e_cqe_post_disable(struct mmc_host *mmc)
|
|
{
|
|
struct sdhci_host *host = mmc_priv(mmc);
|
|
struct cqhci_host *cq_host = mmc->cqe_private;
|
|
u32 value;
|
|
|
|
value = cqhci_readl(cq_host, CQHCI_CFG);
|
|
value &= ~CQHCI_ENABLE;
|
|
cqhci_writel(cq_host, value, CQHCI_CFG);
|
|
sdhci_writew(host, 0x0, SDHCI_TRANSFER_MODE);
|
|
}
|
|
|
|
static const struct cqhci_host_ops sdhci_gl9763e_cqhci_ops = {
|
|
.enable = sdhci_gl9763e_cqe_enable,
|
|
.disable = sdhci_cqe_disable,
|
|
.dumpregs = sdhci_gl9763e_dumpregs,
|
|
.pre_enable = sdhci_gl9763e_cqe_pre_enable,
|
|
.post_disable = sdhci_gl9763e_cqe_post_disable,
|
|
};
|
|
|
|
static int gl9763e_add_host(struct sdhci_pci_slot *slot)
|
|
{
|
|
struct device *dev = &slot->chip->pdev->dev;
|
|
struct sdhci_host *host = slot->host;
|
|
struct cqhci_host *cq_host;
|
|
bool dma64;
|
|
int ret;
|
|
|
|
ret = sdhci_setup_host(host);
|
|
if (ret)
|
|
return ret;
|
|
|
|
cq_host = devm_kzalloc(dev, sizeof(*cq_host), GFP_KERNEL);
|
|
if (!cq_host) {
|
|
ret = -ENOMEM;
|
|
goto cleanup;
|
|
}
|
|
|
|
cq_host->mmio = host->ioaddr + SDHCI_GLI_9763E_CQE_BASE_ADDR;
|
|
cq_host->ops = &sdhci_gl9763e_cqhci_ops;
|
|
|
|
dma64 = host->flags & SDHCI_USE_64_BIT_DMA;
|
|
if (dma64)
|
|
cq_host->caps |= CQHCI_TASK_DESC_SZ_128;
|
|
|
|
ret = cqhci_init(cq_host, host->mmc, dma64);
|
|
if (ret)
|
|
goto cleanup;
|
|
|
|
ret = __sdhci_add_host(host);
|
|
if (ret)
|
|
goto cleanup;
|
|
|
|
/* Disable LPM negotiation to avoid entering L1 state. */
|
|
gl9763e_set_low_power_negotiation(slot, false);
|
|
|
|
return 0;
|
|
|
|
cleanup:
|
|
sdhci_cleanup_host(host);
|
|
return ret;
|
|
}
|
|
|
|
static void gli_set_gl9763e(struct sdhci_pci_slot *slot)
|
|
{
|
|
struct pci_dev *pdev = slot->chip->pdev;
|
|
u32 value;
|
|
|
|
pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value);
|
|
value &= ~GLI_9763E_VHS_REV;
|
|
value |= FIELD_PREP(GLI_9763E_VHS_REV, GLI_9763E_VHS_REV_W);
|
|
pci_write_config_dword(pdev, PCIE_GLI_9763E_VHS, value);
|
|
|
|
pci_read_config_dword(pdev, PCIE_GLI_9763E_SCR, &value);
|
|
value |= GLI_9763E_SCR_AXI_REQ;
|
|
pci_write_config_dword(pdev, PCIE_GLI_9763E_SCR, value);
|
|
|
|
pci_read_config_dword(pdev, PCIE_GLI_9763E_MMC_CTRL, &value);
|
|
value &= ~GLI_9763E_HS400_SLOW;
|
|
pci_write_config_dword(pdev, PCIE_GLI_9763E_MMC_CTRL, value);
|
|
|
|
pci_read_config_dword(pdev, PCIE_GLI_9763E_CFG2, &value);
|
|
value &= ~GLI_9763E_CFG2_L1DLY;
|
|
/* set ASPM L1 entry delay to 21us */
|
|
value |= FIELD_PREP(GLI_9763E_CFG2_L1DLY, GLI_9763E_CFG2_L1DLY_MID);
|
|
pci_write_config_dword(pdev, PCIE_GLI_9763E_CFG2, value);
|
|
|
|
pci_read_config_dword(pdev, PCIE_GLI_9763E_CLKRXDLY, &value);
|
|
value &= ~GLI_9763E_HS400_RXDLY;
|
|
value |= FIELD_PREP(GLI_9763E_HS400_RXDLY, GLI_9763E_HS400_RXDLY_5);
|
|
pci_write_config_dword(pdev, PCIE_GLI_9763E_CLKRXDLY, value);
|
|
|
|
pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value);
|
|
value &= ~GLI_9763E_VHS_REV;
|
|
value |= FIELD_PREP(GLI_9763E_VHS_REV, GLI_9763E_VHS_REV_R);
|
|
pci_write_config_dword(pdev, PCIE_GLI_9763E_VHS, value);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int gl9763e_runtime_suspend(struct sdhci_pci_chip *chip)
|
|
{
|
|
struct sdhci_pci_slot *slot = chip->slots[0];
|
|
struct sdhci_host *host = slot->host;
|
|
u16 clock;
|
|
|
|
/* Enable LPM negotiation to allow entering L1 state */
|
|
gl9763e_set_low_power_negotiation(slot, true);
|
|
|
|
clock = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
|
|
clock &= ~(SDHCI_CLOCK_PLL_EN | SDHCI_CLOCK_CARD_EN);
|
|
sdhci_writew(host, clock, SDHCI_CLOCK_CONTROL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gl9763e_runtime_resume(struct sdhci_pci_chip *chip)
|
|
{
|
|
struct sdhci_pci_slot *slot = chip->slots[0];
|
|
struct sdhci_host *host = slot->host;
|
|
u16 clock;
|
|
|
|
if (host->mmc->ios.power_mode != MMC_POWER_ON)
|
|
return 0;
|
|
|
|
clock = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
|
|
|
|
clock |= SDHCI_CLOCK_PLL_EN;
|
|
clock &= ~SDHCI_CLOCK_INT_STABLE;
|
|
sdhci_writew(host, clock, SDHCI_CLOCK_CONTROL);
|
|
|
|
/* Wait max 150 ms */
|
|
if (read_poll_timeout(sdhci_readw, clock, (clock & SDHCI_CLOCK_INT_STABLE),
|
|
1000, 150000, false, host, SDHCI_CLOCK_CONTROL)) {
|
|
pr_err("%s: PLL clock never stabilised.\n",
|
|
mmc_hostname(host->mmc));
|
|
sdhci_dumpregs(host);
|
|
}
|
|
|
|
clock |= SDHCI_CLOCK_CARD_EN;
|
|
sdhci_writew(host, clock, SDHCI_CLOCK_CONTROL);
|
|
|
|
/* Disable LPM negotiation to avoid entering L1 state. */
|
|
gl9763e_set_low_power_negotiation(slot, false);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int sdhci_pci_gli_resume(struct sdhci_pci_chip *chip)
|
|
{
|
|
struct sdhci_pci_slot *slot = chip->slots[0];
|
|
|
|
pci_free_irq_vectors(slot->chip->pdev);
|
|
gli_pcie_enable_msi(slot);
|
|
|
|
return sdhci_pci_resume_host(chip);
|
|
}
|
|
|
|
static int gl9763e_resume(struct sdhci_pci_chip *chip)
|
|
{
|
|
struct sdhci_pci_slot *slot = chip->slots[0];
|
|
int ret;
|
|
|
|
ret = sdhci_pci_gli_resume(chip);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = cqhci_resume(slot->host->mmc);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* Disable LPM negotiation to bring device back in sync
|
|
* with its runtime_pm state.
|
|
*/
|
|
gl9763e_set_low_power_negotiation(slot, false);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gl9763e_suspend(struct sdhci_pci_chip *chip)
|
|
{
|
|
struct sdhci_pci_slot *slot = chip->slots[0];
|
|
int ret;
|
|
|
|
/*
|
|
* Certain SoCs can suspend only with the bus in low-
|
|
* power state, notably x86 SoCs when using S0ix.
|
|
* Re-enable LPM negotiation to allow entering L1 state
|
|
* and entering system suspend.
|
|
*/
|
|
gl9763e_set_low_power_negotiation(slot, true);
|
|
|
|
ret = cqhci_suspend(slot->host->mmc);
|
|
if (ret)
|
|
goto err_suspend;
|
|
|
|
ret = sdhci_suspend_host(slot->host);
|
|
if (ret)
|
|
goto err_suspend_host;
|
|
|
|
return 0;
|
|
|
|
err_suspend_host:
|
|
cqhci_resume(slot->host->mmc);
|
|
err_suspend:
|
|
gl9763e_set_low_power_negotiation(slot, false);
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
static int gli_probe_slot_gl9763e(struct sdhci_pci_slot *slot)
|
|
{
|
|
struct pci_dev *pdev = slot->chip->pdev;
|
|
struct sdhci_host *host = slot->host;
|
|
u32 value;
|
|
|
|
host->mmc->caps |= MMC_CAP_8_BIT_DATA |
|
|
MMC_CAP_1_8V_DDR |
|
|
MMC_CAP_NONREMOVABLE;
|
|
host->mmc->caps2 |= MMC_CAP2_HS200_1_8V_SDR |
|
|
MMC_CAP2_HS400_1_8V |
|
|
MMC_CAP2_HS400_ES |
|
|
MMC_CAP2_NO_SDIO |
|
|
MMC_CAP2_NO_SD;
|
|
|
|
pci_read_config_dword(pdev, PCIE_GLI_9763E_MB, &value);
|
|
if (!(value & GLI_9763E_MB_CMDQ_OFF))
|
|
if (value & GLI_9763E_MB_ERP_ON)
|
|
host->mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD;
|
|
|
|
gli_pcie_enable_msi(slot);
|
|
host->mmc_host_ops.hs400_enhanced_strobe =
|
|
gl9763e_hs400_enhanced_strobe;
|
|
gli_set_gl9763e(slot);
|
|
sdhci_enable_v4_mode(host);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define REG_OFFSET_IN_BITS(reg) ((reg) << 3 & 0x18)
|
|
|
|
static u16 sdhci_gli_readw(struct sdhci_host *host, int reg)
|
|
{
|
|
u32 val = readl(host->ioaddr + (reg & ~3));
|
|
u16 word;
|
|
|
|
word = (val >> REG_OFFSET_IN_BITS(reg)) & 0xffff;
|
|
return word;
|
|
}
|
|
|
|
static u8 sdhci_gli_readb(struct sdhci_host *host, int reg)
|
|
{
|
|
u32 val = readl(host->ioaddr + (reg & ~3));
|
|
u8 byte = (val >> REG_OFFSET_IN_BITS(reg)) & 0xff;
|
|
|
|
return byte;
|
|
}
|
|
|
|
static const struct sdhci_ops sdhci_gl9755_ops = {
|
|
.read_w = sdhci_gli_readw,
|
|
.read_b = sdhci_gli_readb,
|
|
.set_clock = sdhci_gl9755_set_clock,
|
|
.enable_dma = sdhci_pci_enable_dma,
|
|
.set_bus_width = sdhci_set_bus_width,
|
|
.reset = sdhci_reset,
|
|
.set_uhs_signaling = sdhci_set_uhs_signaling,
|
|
.voltage_switch = sdhci_gli_voltage_switch,
|
|
};
|
|
|
|
const struct sdhci_pci_fixes sdhci_gl9755 = {
|
|
.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
|
|
.quirks2 = SDHCI_QUIRK2_BROKEN_DDR50,
|
|
.probe_slot = gli_probe_slot_gl9755,
|
|
.ops = &sdhci_gl9755_ops,
|
|
#ifdef CONFIG_PM_SLEEP
|
|
.resume = sdhci_pci_gli_resume,
|
|
#endif
|
|
};
|
|
|
|
static const struct sdhci_ops sdhci_gl9750_ops = {
|
|
.read_w = sdhci_gli_readw,
|
|
.read_b = sdhci_gli_readb,
|
|
.read_l = sdhci_gl9750_readl,
|
|
.set_clock = sdhci_gl9750_set_clock,
|
|
.enable_dma = sdhci_pci_enable_dma,
|
|
.set_bus_width = sdhci_set_bus_width,
|
|
.reset = sdhci_gl9750_reset,
|
|
.set_uhs_signaling = sdhci_set_uhs_signaling,
|
|
.voltage_switch = sdhci_gli_voltage_switch,
|
|
.platform_execute_tuning = gl9750_execute_tuning,
|
|
};
|
|
|
|
const struct sdhci_pci_fixes sdhci_gl9750 = {
|
|
.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
|
|
.quirks2 = SDHCI_QUIRK2_BROKEN_DDR50,
|
|
.probe_slot = gli_probe_slot_gl9750,
|
|
.ops = &sdhci_gl9750_ops,
|
|
#ifdef CONFIG_PM_SLEEP
|
|
.resume = sdhci_pci_gli_resume,
|
|
#endif
|
|
};
|
|
|
|
static const struct sdhci_ops sdhci_gl9763e_ops = {
|
|
.set_clock = sdhci_set_clock,
|
|
.enable_dma = sdhci_pci_enable_dma,
|
|
.set_bus_width = sdhci_set_bus_width,
|
|
.reset = sdhci_and_cqhci_reset,
|
|
.set_uhs_signaling = sdhci_set_gl9763e_signaling,
|
|
.voltage_switch = sdhci_gli_voltage_switch,
|
|
.irq = sdhci_gl9763e_cqhci_irq,
|
|
};
|
|
|
|
const struct sdhci_pci_fixes sdhci_gl9763e = {
|
|
.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
|
|
.probe_slot = gli_probe_slot_gl9763e,
|
|
.ops = &sdhci_gl9763e_ops,
|
|
#ifdef CONFIG_PM_SLEEP
|
|
.resume = gl9763e_resume,
|
|
.suspend = gl9763e_suspend,
|
|
#endif
|
|
#ifdef CONFIG_PM
|
|
.runtime_suspend = gl9763e_runtime_suspend,
|
|
.runtime_resume = gl9763e_runtime_resume,
|
|
.allow_runtime_pm = true,
|
|
#endif
|
|
.add_host = gl9763e_add_host,
|
|
};
|
|
|
|
static const struct sdhci_ops sdhci_gl9767_ops = {
|
|
.set_clock = sdhci_gl9767_set_clock,
|
|
.enable_dma = sdhci_pci_enable_dma,
|
|
.set_bus_width = sdhci_set_bus_width,
|
|
.reset = sdhci_gl9767_reset,
|
|
.set_uhs_signaling = sdhci_set_uhs_signaling,
|
|
.voltage_switch = sdhci_gl9767_voltage_switch,
|
|
};
|
|
|
|
const struct sdhci_pci_fixes sdhci_gl9767 = {
|
|
.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
|
|
.quirks2 = SDHCI_QUIRK2_BROKEN_DDR50,
|
|
.probe_slot = gli_probe_slot_gl9767,
|
|
.ops = &sdhci_gl9767_ops,
|
|
#ifdef CONFIG_PM_SLEEP
|
|
.resume = sdhci_pci_gli_resume,
|
|
#endif
|
|
};
|