mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-15 08:14:15 +08:00
623c6d5ec5
Merge the mmc fixes for v6.10-rc[n] into the next branch, to allow them to get tested together with the new mmc changes that are targeted for v6.11. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
557 lines
15 KiB
C
557 lines
15 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* sdhci-brcmstb.c Support for SDHCI on Broadcom BRCMSTB SoC's
|
|
*
|
|
* Copyright (C) 2015 Broadcom Corporation
|
|
*/
|
|
|
|
#include <linux/io.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include "sdhci-cqhci.h"
|
|
#include "sdhci-pltfm.h"
|
|
#include "cqhci.h"
|
|
|
|
#define SDHCI_VENDOR 0x78
|
|
#define SDHCI_VENDOR_ENHANCED_STRB 0x1
|
|
#define SDHCI_VENDOR_GATE_SDCLK_EN 0x2
|
|
|
|
#define BRCMSTB_MATCH_FLAGS_NO_64BIT BIT(0)
|
|
#define BRCMSTB_MATCH_FLAGS_BROKEN_TIMEOUT BIT(1)
|
|
#define BRCMSTB_MATCH_FLAGS_HAS_CLOCK_GATE BIT(2)
|
|
#define BRCMSTB_MATCH_FLAGS_USE_CARD_BUSY BIT(4)
|
|
|
|
#define BRCMSTB_PRIV_FLAGS_HAS_CQE BIT(0)
|
|
#define BRCMSTB_PRIV_FLAGS_GATE_CLOCK BIT(1)
|
|
|
|
#define SDHCI_ARASAN_CQE_BASE_ADDR 0x200
|
|
|
|
#define SDIO_CFG_CQ_CAPABILITY 0x4c
|
|
#define SDIO_CFG_CQ_CAPABILITY_FMUL GENMASK(13, 12)
|
|
|
|
#define SDIO_CFG_CTRL 0x0
|
|
#define SDIO_CFG_CTRL_SDCD_N_TEST_EN BIT(31)
|
|
#define SDIO_CFG_CTRL_SDCD_N_TEST_LEV BIT(30)
|
|
|
|
#define SDIO_CFG_MAX_50MHZ_MODE 0x1ac
|
|
#define SDIO_CFG_MAX_50MHZ_MODE_STRAP_OVERRIDE BIT(31)
|
|
#define SDIO_CFG_MAX_50MHZ_MODE_ENABLE BIT(0)
|
|
|
|
#define MMC_CAP_HSE_MASK (MMC_CAP2_HSX00_1_2V | MMC_CAP2_HSX00_1_8V)
|
|
/* Select all SD UHS type I SDR speed above 50MB/s */
|
|
#define MMC_CAP_UHS_I_SDR_MASK (MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR104)
|
|
|
|
struct sdhci_brcmstb_priv {
|
|
void __iomem *cfg_regs;
|
|
unsigned int flags;
|
|
struct clk *base_clk;
|
|
u32 base_freq_hz;
|
|
};
|
|
|
|
struct brcmstb_match_priv {
|
|
void (*cfginit)(struct sdhci_host *host);
|
|
void (*hs400es)(struct mmc_host *mmc, struct mmc_ios *ios);
|
|
struct sdhci_ops *ops;
|
|
const unsigned int flags;
|
|
};
|
|
|
|
static inline void enable_clock_gating(struct sdhci_host *host)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct sdhci_brcmstb_priv *priv = sdhci_pltfm_priv(pltfm_host);
|
|
u32 reg;
|
|
|
|
if (!(priv->flags & BRCMSTB_PRIV_FLAGS_GATE_CLOCK))
|
|
return;
|
|
|
|
reg = sdhci_readl(host, SDHCI_VENDOR);
|
|
reg |= SDHCI_VENDOR_GATE_SDCLK_EN;
|
|
sdhci_writel(host, reg, SDHCI_VENDOR);
|
|
}
|
|
|
|
static void brcmstb_reset(struct sdhci_host *host, u8 mask)
|
|
{
|
|
sdhci_and_cqhci_reset(host, mask);
|
|
|
|
/* Reset will clear this, so re-enable it */
|
|
enable_clock_gating(host);
|
|
}
|
|
|
|
static void brcmstb_sdhci_reset_cmd_data(struct sdhci_host *host, u8 mask)
|
|
{
|
|
u32 new_mask = (mask & (SDHCI_RESET_CMD | SDHCI_RESET_DATA)) << 24;
|
|
int ret;
|
|
u32 reg;
|
|
|
|
/*
|
|
* SDHCI_CLOCK_CONTROL register CARD_EN and CLOCK_INT_EN bits shall
|
|
* be set along with SOFTWARE_RESET register RESET_CMD or RESET_DATA
|
|
* bits, hence access SDHCI_CLOCK_CONTROL register as 32-bit register
|
|
*/
|
|
new_mask |= SDHCI_CLOCK_CARD_EN | SDHCI_CLOCK_INT_EN;
|
|
reg = sdhci_readl(host, SDHCI_CLOCK_CONTROL);
|
|
sdhci_writel(host, reg | new_mask, SDHCI_CLOCK_CONTROL);
|
|
|
|
reg = sdhci_readb(host, SDHCI_SOFTWARE_RESET);
|
|
|
|
ret = read_poll_timeout_atomic(sdhci_readb, reg, !(reg & mask),
|
|
10, 10000, false,
|
|
host, SDHCI_SOFTWARE_RESET);
|
|
|
|
if (ret) {
|
|
pr_err("%s: Reset 0x%x never completed.\n",
|
|
mmc_hostname(host->mmc), (int)mask);
|
|
sdhci_err_stats_inc(host, CTRL_TIMEOUT);
|
|
sdhci_dumpregs(host);
|
|
}
|
|
}
|
|
|
|
static void brcmstb_reset_74165b0(struct sdhci_host *host, u8 mask)
|
|
{
|
|
/* take care of RESET_ALL as usual */
|
|
if (mask & SDHCI_RESET_ALL)
|
|
sdhci_and_cqhci_reset(host, SDHCI_RESET_ALL);
|
|
|
|
/* cmd and/or data treated differently on this core */
|
|
if (mask & (SDHCI_RESET_CMD | SDHCI_RESET_DATA))
|
|
brcmstb_sdhci_reset_cmd_data(host, mask);
|
|
|
|
/* Reset will clear this, so re-enable it */
|
|
enable_clock_gating(host);
|
|
}
|
|
|
|
static void sdhci_brcmstb_hs400es(struct mmc_host *mmc, struct mmc_ios *ios)
|
|
{
|
|
struct sdhci_host *host = mmc_priv(mmc);
|
|
|
|
u32 reg;
|
|
|
|
dev_dbg(mmc_dev(mmc), "%s(): Setting HS400-Enhanced-Strobe mode\n",
|
|
__func__);
|
|
reg = readl(host->ioaddr + SDHCI_VENDOR);
|
|
if (ios->enhanced_strobe)
|
|
reg |= SDHCI_VENDOR_ENHANCED_STRB;
|
|
else
|
|
reg &= ~SDHCI_VENDOR_ENHANCED_STRB;
|
|
writel(reg, host->ioaddr + SDHCI_VENDOR);
|
|
}
|
|
|
|
static void sdhci_brcmstb_set_clock(struct sdhci_host *host, unsigned int clock)
|
|
{
|
|
u16 clk;
|
|
|
|
host->mmc->actual_clock = 0;
|
|
|
|
clk = sdhci_calc_clk(host, clock, &host->mmc->actual_clock);
|
|
sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
|
|
|
|
if (clock == 0)
|
|
return;
|
|
|
|
sdhci_enable_clk(host, clk);
|
|
}
|
|
|
|
static void sdhci_brcmstb_set_uhs_signaling(struct sdhci_host *host,
|
|
unsigned int timing)
|
|
{
|
|
u16 ctrl_2;
|
|
|
|
dev_dbg(mmc_dev(host->mmc), "%s: Setting UHS signaling for %d timing\n",
|
|
__func__, timing);
|
|
ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
|
|
/* Select Bus Speed Mode for host */
|
|
ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
|
|
if ((timing == MMC_TIMING_MMC_HS200) ||
|
|
(timing == MMC_TIMING_UHS_SDR104))
|
|
ctrl_2 |= SDHCI_CTRL_UHS_SDR104;
|
|
else if (timing == MMC_TIMING_UHS_SDR12)
|
|
ctrl_2 |= SDHCI_CTRL_UHS_SDR12;
|
|
else if (timing == MMC_TIMING_SD_HS ||
|
|
timing == MMC_TIMING_MMC_HS ||
|
|
timing == MMC_TIMING_UHS_SDR25)
|
|
ctrl_2 |= SDHCI_CTRL_UHS_SDR25;
|
|
else if (timing == MMC_TIMING_UHS_SDR50)
|
|
ctrl_2 |= SDHCI_CTRL_UHS_SDR50;
|
|
else if ((timing == MMC_TIMING_UHS_DDR50) ||
|
|
(timing == MMC_TIMING_MMC_DDR52))
|
|
ctrl_2 |= SDHCI_CTRL_UHS_DDR50;
|
|
else if (timing == MMC_TIMING_MMC_HS400)
|
|
ctrl_2 |= SDHCI_CTRL_HS400; /* Non-standard */
|
|
sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
|
|
}
|
|
|
|
static void sdhci_brcmstb_cfginit_2712(struct sdhci_host *host)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct sdhci_brcmstb_priv *brcmstb_priv = sdhci_pltfm_priv(pltfm_host);
|
|
u32 reg;
|
|
|
|
/*
|
|
* If we support a speed that requires tuning,
|
|
* then select the delay line PHY as the clock source.
|
|
*/
|
|
if ((host->mmc->caps & MMC_CAP_UHS_I_SDR_MASK) || (host->mmc->caps2 & MMC_CAP_HSE_MASK)) {
|
|
reg = readl(brcmstb_priv->cfg_regs + SDIO_CFG_MAX_50MHZ_MODE);
|
|
reg &= ~SDIO_CFG_MAX_50MHZ_MODE_ENABLE;
|
|
reg |= SDIO_CFG_MAX_50MHZ_MODE_STRAP_OVERRIDE;
|
|
writel(reg, brcmstb_priv->cfg_regs + SDIO_CFG_MAX_50MHZ_MODE);
|
|
}
|
|
|
|
if ((host->mmc->caps & MMC_CAP_NONREMOVABLE) ||
|
|
(host->mmc->caps & MMC_CAP_NEEDS_POLL)) {
|
|
/* Force presence */
|
|
reg = readl(brcmstb_priv->cfg_regs + SDIO_CFG_CTRL);
|
|
reg &= ~SDIO_CFG_CTRL_SDCD_N_TEST_LEV;
|
|
reg |= SDIO_CFG_CTRL_SDCD_N_TEST_EN;
|
|
writel(reg, brcmstb_priv->cfg_regs + SDIO_CFG_CTRL);
|
|
}
|
|
}
|
|
|
|
static void sdhci_brcmstb_dumpregs(struct mmc_host *mmc)
|
|
{
|
|
sdhci_dumpregs(mmc_priv(mmc));
|
|
}
|
|
|
|
static void sdhci_brcmstb_cqe_enable(struct mmc_host *mmc)
|
|
{
|
|
struct sdhci_host *host = mmc_priv(mmc);
|
|
u32 reg;
|
|
|
|
reg = sdhci_readl(host, SDHCI_PRESENT_STATE);
|
|
while (reg & SDHCI_DATA_AVAILABLE) {
|
|
sdhci_readl(host, SDHCI_BUFFER);
|
|
reg = sdhci_readl(host, SDHCI_PRESENT_STATE);
|
|
}
|
|
|
|
sdhci_cqe_enable(mmc);
|
|
}
|
|
|
|
static const struct cqhci_host_ops sdhci_brcmstb_cqhci_ops = {
|
|
.enable = sdhci_brcmstb_cqe_enable,
|
|
.disable = sdhci_cqe_disable,
|
|
.dumpregs = sdhci_brcmstb_dumpregs,
|
|
};
|
|
|
|
static struct sdhci_ops sdhci_brcmstb_ops = {
|
|
.set_clock = sdhci_set_clock,
|
|
.set_bus_width = sdhci_set_bus_width,
|
|
.reset = sdhci_reset,
|
|
.set_uhs_signaling = sdhci_set_uhs_signaling,
|
|
};
|
|
|
|
static struct sdhci_ops sdhci_brcmstb_ops_2712 = {
|
|
.set_clock = sdhci_set_clock,
|
|
.set_power = sdhci_set_power_and_bus_voltage,
|
|
.set_bus_width = sdhci_set_bus_width,
|
|
.reset = sdhci_reset,
|
|
.set_uhs_signaling = sdhci_set_uhs_signaling,
|
|
};
|
|
|
|
static struct sdhci_ops sdhci_brcmstb_ops_7216 = {
|
|
.set_clock = sdhci_brcmstb_set_clock,
|
|
.set_bus_width = sdhci_set_bus_width,
|
|
.reset = brcmstb_reset,
|
|
.set_uhs_signaling = sdhci_brcmstb_set_uhs_signaling,
|
|
};
|
|
|
|
static struct sdhci_ops sdhci_brcmstb_ops_74165b0 = {
|
|
.set_clock = sdhci_brcmstb_set_clock,
|
|
.set_bus_width = sdhci_set_bus_width,
|
|
.reset = brcmstb_reset_74165b0,
|
|
.set_uhs_signaling = sdhci_brcmstb_set_uhs_signaling,
|
|
};
|
|
|
|
static const struct brcmstb_match_priv match_priv_2712 = {
|
|
.cfginit = sdhci_brcmstb_cfginit_2712,
|
|
.ops = &sdhci_brcmstb_ops_2712,
|
|
};
|
|
|
|
static struct brcmstb_match_priv match_priv_7425 = {
|
|
.flags = BRCMSTB_MATCH_FLAGS_NO_64BIT |
|
|
BRCMSTB_MATCH_FLAGS_BROKEN_TIMEOUT,
|
|
.ops = &sdhci_brcmstb_ops,
|
|
};
|
|
|
|
static struct brcmstb_match_priv match_priv_7445 = {
|
|
.flags = BRCMSTB_MATCH_FLAGS_BROKEN_TIMEOUT,
|
|
.ops = &sdhci_brcmstb_ops,
|
|
};
|
|
|
|
static const struct brcmstb_match_priv match_priv_7216 = {
|
|
.flags = BRCMSTB_MATCH_FLAGS_HAS_CLOCK_GATE,
|
|
.hs400es = sdhci_brcmstb_hs400es,
|
|
.ops = &sdhci_brcmstb_ops_7216,
|
|
};
|
|
|
|
static struct brcmstb_match_priv match_priv_74165b0 = {
|
|
.flags = BRCMSTB_MATCH_FLAGS_HAS_CLOCK_GATE,
|
|
.hs400es = sdhci_brcmstb_hs400es,
|
|
.ops = &sdhci_brcmstb_ops_74165b0,
|
|
};
|
|
|
|
static const struct of_device_id __maybe_unused sdhci_brcm_of_match[] = {
|
|
{ .compatible = "brcm,bcm2712-sdhci", .data = &match_priv_2712 },
|
|
{ .compatible = "brcm,bcm7425-sdhci", .data = &match_priv_7425 },
|
|
{ .compatible = "brcm,bcm7445-sdhci", .data = &match_priv_7445 },
|
|
{ .compatible = "brcm,bcm7216-sdhci", .data = &match_priv_7216 },
|
|
{ .compatible = "brcm,bcm74165b0-sdhci", .data = &match_priv_74165b0 },
|
|
{},
|
|
};
|
|
|
|
static u32 sdhci_brcmstb_cqhci_irq(struct sdhci_host *host, u32 intmask)
|
|
{
|
|
int cmd_error = 0;
|
|
int data_error = 0;
|
|
|
|
if (!sdhci_cqe_irq(host, intmask, &cmd_error, &data_error))
|
|
return intmask;
|
|
|
|
cqhci_irq(host->mmc, intmask, cmd_error, data_error);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sdhci_brcmstb_add_host(struct sdhci_host *host,
|
|
struct sdhci_brcmstb_priv *priv)
|
|
{
|
|
struct cqhci_host *cq_host;
|
|
bool dma64;
|
|
int ret;
|
|
|
|
if ((priv->flags & BRCMSTB_PRIV_FLAGS_HAS_CQE) == 0)
|
|
return sdhci_add_host(host);
|
|
|
|
dev_dbg(mmc_dev(host->mmc), "CQE is enabled\n");
|
|
host->mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD;
|
|
ret = sdhci_setup_host(host);
|
|
if (ret)
|
|
return ret;
|
|
|
|
cq_host = devm_kzalloc(mmc_dev(host->mmc),
|
|
sizeof(*cq_host), GFP_KERNEL);
|
|
if (!cq_host) {
|
|
ret = -ENOMEM;
|
|
goto cleanup;
|
|
}
|
|
|
|
cq_host->mmio = host->ioaddr + SDHCI_ARASAN_CQE_BASE_ADDR;
|
|
cq_host->ops = &sdhci_brcmstb_cqhci_ops;
|
|
|
|
dma64 = host->flags & SDHCI_USE_64_BIT_DMA;
|
|
if (dma64) {
|
|
dev_dbg(mmc_dev(host->mmc), "Using 64 bit DMA\n");
|
|
cq_host->caps |= CQHCI_TASK_DESC_SZ_128;
|
|
}
|
|
|
|
ret = cqhci_init(cq_host, host->mmc, dma64);
|
|
if (ret)
|
|
goto cleanup;
|
|
|
|
ret = __sdhci_add_host(host);
|
|
if (ret)
|
|
goto cleanup;
|
|
|
|
return 0;
|
|
|
|
cleanup:
|
|
sdhci_cleanup_host(host);
|
|
return ret;
|
|
}
|
|
|
|
static int sdhci_brcmstb_probe(struct platform_device *pdev)
|
|
{
|
|
const struct brcmstb_match_priv *match_priv;
|
|
struct sdhci_pltfm_data brcmstb_pdata;
|
|
struct sdhci_pltfm_host *pltfm_host;
|
|
const struct of_device_id *match;
|
|
struct sdhci_brcmstb_priv *priv;
|
|
u32 actual_clock_mhz;
|
|
struct sdhci_host *host;
|
|
struct clk *clk;
|
|
struct clk *base_clk = NULL;
|
|
int res;
|
|
|
|
match = of_match_node(sdhci_brcm_of_match, pdev->dev.of_node);
|
|
match_priv = match->data;
|
|
|
|
dev_dbg(&pdev->dev, "Probe found match for %s\n", match->compatible);
|
|
|
|
clk = devm_clk_get_optional_enabled(&pdev->dev, NULL);
|
|
if (IS_ERR(clk))
|
|
return dev_err_probe(&pdev->dev, PTR_ERR(clk),
|
|
"Failed to get and enable clock from Device Tree\n");
|
|
|
|
memset(&brcmstb_pdata, 0, sizeof(brcmstb_pdata));
|
|
brcmstb_pdata.ops = match_priv->ops;
|
|
host = sdhci_pltfm_init(pdev, &brcmstb_pdata,
|
|
sizeof(struct sdhci_brcmstb_priv));
|
|
if (IS_ERR(host))
|
|
return PTR_ERR(host);
|
|
|
|
pltfm_host = sdhci_priv(host);
|
|
priv = sdhci_pltfm_priv(pltfm_host);
|
|
if (device_property_read_bool(&pdev->dev, "supports-cqe")) {
|
|
priv->flags |= BRCMSTB_PRIV_FLAGS_HAS_CQE;
|
|
match_priv->ops->irq = sdhci_brcmstb_cqhci_irq;
|
|
}
|
|
|
|
/* Map in the non-standard CFG registers */
|
|
priv->cfg_regs = devm_platform_get_and_ioremap_resource(pdev, 1, NULL);
|
|
if (IS_ERR(priv->cfg_regs)) {
|
|
res = PTR_ERR(priv->cfg_regs);
|
|
goto err;
|
|
}
|
|
|
|
sdhci_get_of_property(pdev);
|
|
res = mmc_of_parse(host->mmc);
|
|
if (res)
|
|
goto err;
|
|
|
|
/*
|
|
* Automatic clock gating does not work for SD cards that may
|
|
* voltage switch so only enable it for non-removable devices.
|
|
*/
|
|
if ((match_priv->flags & BRCMSTB_MATCH_FLAGS_HAS_CLOCK_GATE) &&
|
|
(host->mmc->caps & MMC_CAP_NONREMOVABLE))
|
|
priv->flags |= BRCMSTB_PRIV_FLAGS_GATE_CLOCK;
|
|
|
|
/*
|
|
* If the chip has enhanced strobe and it's enabled, add
|
|
* callback
|
|
*/
|
|
if (match_priv->hs400es &&
|
|
(host->mmc->caps2 & MMC_CAP2_HS400_ES))
|
|
host->mmc_host_ops.hs400_enhanced_strobe = match_priv->hs400es;
|
|
|
|
if (match_priv->cfginit)
|
|
match_priv->cfginit(host);
|
|
|
|
/*
|
|
* Supply the existing CAPS, but clear the UHS modes. This
|
|
* will allow these modes to be specified by device tree
|
|
* properties through mmc_of_parse().
|
|
*/
|
|
sdhci_read_caps(host);
|
|
if (match_priv->flags & BRCMSTB_MATCH_FLAGS_NO_64BIT)
|
|
host->caps &= ~SDHCI_CAN_64BIT;
|
|
host->caps1 &= ~(SDHCI_SUPPORT_SDR50 | SDHCI_SUPPORT_SDR104 |
|
|
SDHCI_SUPPORT_DDR50);
|
|
|
|
if (match_priv->flags & BRCMSTB_MATCH_FLAGS_BROKEN_TIMEOUT)
|
|
host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
|
|
|
|
if (!(match_priv->flags & BRCMSTB_MATCH_FLAGS_USE_CARD_BUSY))
|
|
host->mmc_host_ops.card_busy = NULL;
|
|
|
|
/* Change the base clock frequency if the DT property exists */
|
|
if (device_property_read_u32(&pdev->dev, "clock-frequency",
|
|
&priv->base_freq_hz) != 0)
|
|
goto add_host;
|
|
|
|
base_clk = devm_clk_get_optional(&pdev->dev, "sdio_freq");
|
|
if (IS_ERR(base_clk)) {
|
|
dev_warn(&pdev->dev, "Clock for \"sdio_freq\" not found\n");
|
|
goto add_host;
|
|
}
|
|
|
|
res = clk_prepare_enable(base_clk);
|
|
if (res)
|
|
goto err;
|
|
|
|
/* set improved clock rate */
|
|
clk_set_rate(base_clk, priv->base_freq_hz);
|
|
actual_clock_mhz = clk_get_rate(base_clk) / 1000000;
|
|
|
|
host->caps &= ~SDHCI_CLOCK_V3_BASE_MASK;
|
|
host->caps |= (actual_clock_mhz << SDHCI_CLOCK_BASE_SHIFT);
|
|
/* Disable presets because they are now incorrect */
|
|
host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
|
|
|
|
dev_dbg(&pdev->dev, "Base Clock Frequency changed to %dMHz\n",
|
|
actual_clock_mhz);
|
|
priv->base_clk = base_clk;
|
|
|
|
add_host:
|
|
res = sdhci_brcmstb_add_host(host, priv);
|
|
if (res)
|
|
goto err;
|
|
|
|
pltfm_host->clk = clk;
|
|
return res;
|
|
|
|
err:
|
|
sdhci_pltfm_free(pdev);
|
|
clk_disable_unprepare(base_clk);
|
|
return res;
|
|
}
|
|
|
|
static void sdhci_brcmstb_shutdown(struct platform_device *pdev)
|
|
{
|
|
sdhci_pltfm_suspend(&pdev->dev);
|
|
}
|
|
|
|
MODULE_DEVICE_TABLE(of, sdhci_brcm_of_match);
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int sdhci_brcmstb_suspend(struct device *dev)
|
|
{
|
|
struct sdhci_host *host = dev_get_drvdata(dev);
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct sdhci_brcmstb_priv *priv = sdhci_pltfm_priv(pltfm_host);
|
|
|
|
clk_disable_unprepare(priv->base_clk);
|
|
return sdhci_pltfm_suspend(dev);
|
|
}
|
|
|
|
static int sdhci_brcmstb_resume(struct device *dev)
|
|
{
|
|
struct sdhci_host *host = dev_get_drvdata(dev);
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct sdhci_brcmstb_priv *priv = sdhci_pltfm_priv(pltfm_host);
|
|
int ret;
|
|
|
|
ret = sdhci_pltfm_resume(dev);
|
|
if (!ret && priv->base_freq_hz) {
|
|
ret = clk_prepare_enable(priv->base_clk);
|
|
/*
|
|
* Note: using clk_get_rate() below as clk_get_rate()
|
|
* honors CLK_GET_RATE_NOCACHE attribute, but clk_set_rate()
|
|
* may do implicit get_rate() calls that do not honor
|
|
* CLK_GET_RATE_NOCACHE.
|
|
*/
|
|
if (!ret &&
|
|
(clk_get_rate(priv->base_clk) != priv->base_freq_hz))
|
|
ret = clk_set_rate(priv->base_clk, priv->base_freq_hz);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
static const struct dev_pm_ops sdhci_brcmstb_pmops = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(sdhci_brcmstb_suspend, sdhci_brcmstb_resume)
|
|
};
|
|
|
|
static struct platform_driver sdhci_brcmstb_driver = {
|
|
.driver = {
|
|
.name = "sdhci-brcmstb",
|
|
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
|
|
.pm = &sdhci_brcmstb_pmops,
|
|
.of_match_table = of_match_ptr(sdhci_brcm_of_match),
|
|
},
|
|
.probe = sdhci_brcmstb_probe,
|
|
.remove_new = sdhci_pltfm_remove,
|
|
.shutdown = sdhci_brcmstb_shutdown,
|
|
};
|
|
|
|
module_platform_driver(sdhci_brcmstb_driver);
|
|
|
|
MODULE_DESCRIPTION("SDHCI driver for Broadcom BRCMSTB SoCs");
|
|
MODULE_AUTHOR("Broadcom");
|
|
MODULE_LICENSE("GPL v2");
|