mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-15 08:14:15 +08:00
a2b8fa7853
Use preferred device_get_match_data() instead of of_match_device() to get the driver match data. With this, adjust the includes to explicitly include the correct headers. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20231006224343.441720-1-robh@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
1208 lines
30 KiB
C
1208 lines
30 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
|
|
* Copyright (C) 2013, Imagination Technologies
|
|
*
|
|
* JZ4740 SD/MMC controller driver
|
|
*/
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/dmaengine.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/err.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/mmc/slot-gpio.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/pinctrl/consumer.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/property.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/scatterlist.h>
|
|
|
|
#include <asm/cacheflush.h>
|
|
|
|
#define JZ_REG_MMC_STRPCL 0x00
|
|
#define JZ_REG_MMC_STATUS 0x04
|
|
#define JZ_REG_MMC_CLKRT 0x08
|
|
#define JZ_REG_MMC_CMDAT 0x0C
|
|
#define JZ_REG_MMC_RESTO 0x10
|
|
#define JZ_REG_MMC_RDTO 0x14
|
|
#define JZ_REG_MMC_BLKLEN 0x18
|
|
#define JZ_REG_MMC_NOB 0x1C
|
|
#define JZ_REG_MMC_SNOB 0x20
|
|
#define JZ_REG_MMC_IMASK 0x24
|
|
#define JZ_REG_MMC_IREG 0x28
|
|
#define JZ_REG_MMC_CMD 0x2C
|
|
#define JZ_REG_MMC_ARG 0x30
|
|
#define JZ_REG_MMC_RESP_FIFO 0x34
|
|
#define JZ_REG_MMC_RXFIFO 0x38
|
|
#define JZ_REG_MMC_TXFIFO 0x3C
|
|
#define JZ_REG_MMC_LPM 0x40
|
|
#define JZ_REG_MMC_DMAC 0x44
|
|
|
|
#define JZ_MMC_STRPCL_EXIT_MULTIPLE BIT(7)
|
|
#define JZ_MMC_STRPCL_EXIT_TRANSFER BIT(6)
|
|
#define JZ_MMC_STRPCL_START_READWAIT BIT(5)
|
|
#define JZ_MMC_STRPCL_STOP_READWAIT BIT(4)
|
|
#define JZ_MMC_STRPCL_RESET BIT(3)
|
|
#define JZ_MMC_STRPCL_START_OP BIT(2)
|
|
#define JZ_MMC_STRPCL_CLOCK_CONTROL (BIT(1) | BIT(0))
|
|
#define JZ_MMC_STRPCL_CLOCK_STOP BIT(0)
|
|
#define JZ_MMC_STRPCL_CLOCK_START BIT(1)
|
|
|
|
|
|
#define JZ_MMC_STATUS_IS_RESETTING BIT(15)
|
|
#define JZ_MMC_STATUS_SDIO_INT_ACTIVE BIT(14)
|
|
#define JZ_MMC_STATUS_PRG_DONE BIT(13)
|
|
#define JZ_MMC_STATUS_DATA_TRAN_DONE BIT(12)
|
|
#define JZ_MMC_STATUS_END_CMD_RES BIT(11)
|
|
#define JZ_MMC_STATUS_DATA_FIFO_AFULL BIT(10)
|
|
#define JZ_MMC_STATUS_IS_READWAIT BIT(9)
|
|
#define JZ_MMC_STATUS_CLK_EN BIT(8)
|
|
#define JZ_MMC_STATUS_DATA_FIFO_FULL BIT(7)
|
|
#define JZ_MMC_STATUS_DATA_FIFO_EMPTY BIT(6)
|
|
#define JZ_MMC_STATUS_CRC_RES_ERR BIT(5)
|
|
#define JZ_MMC_STATUS_CRC_READ_ERROR BIT(4)
|
|
#define JZ_MMC_STATUS_TIMEOUT_WRITE BIT(3)
|
|
#define JZ_MMC_STATUS_CRC_WRITE_ERROR BIT(2)
|
|
#define JZ_MMC_STATUS_TIMEOUT_RES BIT(1)
|
|
#define JZ_MMC_STATUS_TIMEOUT_READ BIT(0)
|
|
|
|
#define JZ_MMC_STATUS_READ_ERROR_MASK (BIT(4) | BIT(0))
|
|
#define JZ_MMC_STATUS_WRITE_ERROR_MASK (BIT(3) | BIT(2))
|
|
|
|
|
|
#define JZ_MMC_CMDAT_IO_ABORT BIT(11)
|
|
#define JZ_MMC_CMDAT_BUS_WIDTH_4BIT BIT(10)
|
|
#define JZ_MMC_CMDAT_BUS_WIDTH_8BIT (BIT(10) | BIT(9))
|
|
#define JZ_MMC_CMDAT_BUS_WIDTH_MASK (BIT(10) | BIT(9))
|
|
#define JZ_MMC_CMDAT_DMA_EN BIT(8)
|
|
#define JZ_MMC_CMDAT_INIT BIT(7)
|
|
#define JZ_MMC_CMDAT_BUSY BIT(6)
|
|
#define JZ_MMC_CMDAT_STREAM BIT(5)
|
|
#define JZ_MMC_CMDAT_WRITE BIT(4)
|
|
#define JZ_MMC_CMDAT_DATA_EN BIT(3)
|
|
#define JZ_MMC_CMDAT_RESPONSE_FORMAT (BIT(2) | BIT(1) | BIT(0))
|
|
#define JZ_MMC_CMDAT_RSP_R1 1
|
|
#define JZ_MMC_CMDAT_RSP_R2 2
|
|
#define JZ_MMC_CMDAT_RSP_R3 3
|
|
|
|
#define JZ_MMC_IRQ_SDIO BIT(7)
|
|
#define JZ_MMC_IRQ_TXFIFO_WR_REQ BIT(6)
|
|
#define JZ_MMC_IRQ_RXFIFO_RD_REQ BIT(5)
|
|
#define JZ_MMC_IRQ_END_CMD_RES BIT(2)
|
|
#define JZ_MMC_IRQ_PRG_DONE BIT(1)
|
|
#define JZ_MMC_IRQ_DATA_TRAN_DONE BIT(0)
|
|
|
|
#define JZ_MMC_DMAC_DMA_SEL BIT(1)
|
|
#define JZ_MMC_DMAC_DMA_EN BIT(0)
|
|
|
|
#define JZ_MMC_LPM_DRV_RISING BIT(31)
|
|
#define JZ_MMC_LPM_DRV_RISING_QTR_PHASE_DLY BIT(31)
|
|
#define JZ_MMC_LPM_DRV_RISING_1NS_DLY BIT(30)
|
|
#define JZ_MMC_LPM_SMP_RISING_QTR_OR_HALF_PHASE_DLY BIT(29)
|
|
#define JZ_MMC_LPM_LOW_POWER_MODE_EN BIT(0)
|
|
|
|
#define JZ_MMC_CLK_RATE 24000000
|
|
#define JZ_MMC_REQ_TIMEOUT_MS 5000
|
|
|
|
enum jz4740_mmc_version {
|
|
JZ_MMC_JZ4740,
|
|
JZ_MMC_JZ4725B,
|
|
JZ_MMC_JZ4760,
|
|
JZ_MMC_JZ4780,
|
|
JZ_MMC_X1000,
|
|
};
|
|
|
|
enum jz4740_mmc_state {
|
|
JZ4740_MMC_STATE_READ_RESPONSE,
|
|
JZ4740_MMC_STATE_TRANSFER_DATA,
|
|
JZ4740_MMC_STATE_SEND_STOP,
|
|
JZ4740_MMC_STATE_DONE,
|
|
};
|
|
|
|
/*
|
|
* The MMC core allows to prepare a mmc_request while another mmc_request
|
|
* is in-flight. This is used via the pre_req/post_req hooks.
|
|
* This driver uses the pre_req/post_req hooks to map/unmap the mmc_request.
|
|
* Following what other drivers do (sdhci, dw_mmc) we use the following cookie
|
|
* flags to keep track of the mmc_request mapping state.
|
|
*
|
|
* COOKIE_UNMAPPED: the request is not mapped.
|
|
* COOKIE_PREMAPPED: the request was mapped in pre_req,
|
|
* and should be unmapped in post_req.
|
|
* COOKIE_MAPPED: the request was mapped in the irq handler,
|
|
* and should be unmapped before mmc_request_done is called..
|
|
*/
|
|
enum jz4780_cookie {
|
|
COOKIE_UNMAPPED = 0,
|
|
COOKIE_PREMAPPED,
|
|
COOKIE_MAPPED,
|
|
};
|
|
|
|
struct jz4740_mmc_host {
|
|
struct mmc_host *mmc;
|
|
struct platform_device *pdev;
|
|
struct clk *clk;
|
|
|
|
enum jz4740_mmc_version version;
|
|
|
|
int irq;
|
|
|
|
void __iomem *base;
|
|
struct resource *mem_res;
|
|
struct mmc_request *req;
|
|
struct mmc_command *cmd;
|
|
|
|
bool vqmmc_enabled;
|
|
|
|
unsigned long waiting;
|
|
|
|
uint32_t cmdat;
|
|
|
|
uint32_t irq_mask;
|
|
|
|
spinlock_t lock;
|
|
|
|
struct timer_list timeout_timer;
|
|
struct sg_mapping_iter miter;
|
|
enum jz4740_mmc_state state;
|
|
|
|
/* DMA support */
|
|
struct dma_chan *dma_rx;
|
|
struct dma_chan *dma_tx;
|
|
bool use_dma;
|
|
|
|
/* The DMA trigger level is 8 words, that is to say, the DMA read
|
|
* trigger is when data words in MSC_RXFIFO is >= 8 and the DMA write
|
|
* trigger is when data words in MSC_TXFIFO is < 8.
|
|
*/
|
|
#define JZ4740_MMC_FIFO_HALF_SIZE 8
|
|
};
|
|
|
|
static void jz4740_mmc_write_irq_mask(struct jz4740_mmc_host *host,
|
|
uint32_t val)
|
|
{
|
|
if (host->version >= JZ_MMC_JZ4725B)
|
|
return writel(val, host->base + JZ_REG_MMC_IMASK);
|
|
else
|
|
return writew(val, host->base + JZ_REG_MMC_IMASK);
|
|
}
|
|
|
|
static void jz4740_mmc_write_irq_reg(struct jz4740_mmc_host *host,
|
|
uint32_t val)
|
|
{
|
|
if (host->version >= JZ_MMC_JZ4780)
|
|
writel(val, host->base + JZ_REG_MMC_IREG);
|
|
else
|
|
writew(val, host->base + JZ_REG_MMC_IREG);
|
|
}
|
|
|
|
static uint32_t jz4740_mmc_read_irq_reg(struct jz4740_mmc_host *host)
|
|
{
|
|
if (host->version >= JZ_MMC_JZ4780)
|
|
return readl(host->base + JZ_REG_MMC_IREG);
|
|
else
|
|
return readw(host->base + JZ_REG_MMC_IREG);
|
|
}
|
|
|
|
/*----------------------------------------------------------------------------*/
|
|
/* DMA infrastructure */
|
|
|
|
static void jz4740_mmc_release_dma_channels(struct jz4740_mmc_host *host)
|
|
{
|
|
if (!host->use_dma)
|
|
return;
|
|
|
|
dma_release_channel(host->dma_tx);
|
|
if (host->dma_rx)
|
|
dma_release_channel(host->dma_rx);
|
|
}
|
|
|
|
static int jz4740_mmc_acquire_dma_channels(struct jz4740_mmc_host *host)
|
|
{
|
|
struct device *dev = mmc_dev(host->mmc);
|
|
|
|
host->dma_tx = dma_request_chan(dev, "tx-rx");
|
|
if (!IS_ERR(host->dma_tx))
|
|
return 0;
|
|
|
|
if (PTR_ERR(host->dma_tx) != -ENODEV) {
|
|
dev_err(dev, "Failed to get dma tx-rx channel\n");
|
|
return PTR_ERR(host->dma_tx);
|
|
}
|
|
|
|
host->dma_tx = dma_request_chan(mmc_dev(host->mmc), "tx");
|
|
if (IS_ERR(host->dma_tx)) {
|
|
dev_err(mmc_dev(host->mmc), "Failed to get dma_tx channel\n");
|
|
return PTR_ERR(host->dma_tx);
|
|
}
|
|
|
|
host->dma_rx = dma_request_chan(mmc_dev(host->mmc), "rx");
|
|
if (IS_ERR(host->dma_rx)) {
|
|
dev_err(mmc_dev(host->mmc), "Failed to get dma_rx channel\n");
|
|
dma_release_channel(host->dma_tx);
|
|
return PTR_ERR(host->dma_rx);
|
|
}
|
|
|
|
/*
|
|
* Limit the maximum segment size in any SG entry according to
|
|
* the parameters of the DMA engine device.
|
|
*/
|
|
if (host->dma_tx) {
|
|
struct device *dev = host->dma_tx->device->dev;
|
|
unsigned int max_seg_size = dma_get_max_seg_size(dev);
|
|
|
|
if (max_seg_size < host->mmc->max_seg_size)
|
|
host->mmc->max_seg_size = max_seg_size;
|
|
}
|
|
|
|
if (host->dma_rx) {
|
|
struct device *dev = host->dma_rx->device->dev;
|
|
unsigned int max_seg_size = dma_get_max_seg_size(dev);
|
|
|
|
if (max_seg_size < host->mmc->max_seg_size)
|
|
host->mmc->max_seg_size = max_seg_size;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline struct dma_chan *jz4740_mmc_get_dma_chan(struct jz4740_mmc_host *host,
|
|
struct mmc_data *data)
|
|
{
|
|
if ((data->flags & MMC_DATA_READ) && host->dma_rx)
|
|
return host->dma_rx;
|
|
else
|
|
return host->dma_tx;
|
|
}
|
|
|
|
static void jz4740_mmc_dma_unmap(struct jz4740_mmc_host *host,
|
|
struct mmc_data *data)
|
|
{
|
|
struct dma_chan *chan = jz4740_mmc_get_dma_chan(host, data);
|
|
enum dma_data_direction dir = mmc_get_dma_dir(data);
|
|
|
|
dma_unmap_sg(chan->device->dev, data->sg, data->sg_len, dir);
|
|
data->host_cookie = COOKIE_UNMAPPED;
|
|
}
|
|
|
|
/* Prepares DMA data for current or next transfer.
|
|
* A request can be in-flight when this is called.
|
|
*/
|
|
static int jz4740_mmc_prepare_dma_data(struct jz4740_mmc_host *host,
|
|
struct mmc_data *data,
|
|
int cookie)
|
|
{
|
|
struct dma_chan *chan = jz4740_mmc_get_dma_chan(host, data);
|
|
enum dma_data_direction dir = mmc_get_dma_dir(data);
|
|
unsigned int sg_count;
|
|
|
|
if (data->host_cookie == COOKIE_PREMAPPED)
|
|
return data->sg_count;
|
|
|
|
sg_count = dma_map_sg(chan->device->dev,
|
|
data->sg,
|
|
data->sg_len,
|
|
dir);
|
|
|
|
if (!sg_count) {
|
|
dev_err(mmc_dev(host->mmc),
|
|
"Failed to map scatterlist for DMA operation\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
data->sg_count = sg_count;
|
|
data->host_cookie = cookie;
|
|
|
|
return data->sg_count;
|
|
}
|
|
|
|
static int jz4740_mmc_start_dma_transfer(struct jz4740_mmc_host *host,
|
|
struct mmc_data *data)
|
|
{
|
|
struct dma_chan *chan = jz4740_mmc_get_dma_chan(host, data);
|
|
struct dma_async_tx_descriptor *desc;
|
|
struct dma_slave_config conf = {
|
|
.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
|
|
.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
|
|
.src_maxburst = JZ4740_MMC_FIFO_HALF_SIZE,
|
|
.dst_maxburst = JZ4740_MMC_FIFO_HALF_SIZE,
|
|
};
|
|
int sg_count;
|
|
|
|
if (data->flags & MMC_DATA_WRITE) {
|
|
conf.direction = DMA_MEM_TO_DEV;
|
|
conf.dst_addr = host->mem_res->start + JZ_REG_MMC_TXFIFO;
|
|
} else {
|
|
conf.direction = DMA_DEV_TO_MEM;
|
|
conf.src_addr = host->mem_res->start + JZ_REG_MMC_RXFIFO;
|
|
}
|
|
|
|
sg_count = jz4740_mmc_prepare_dma_data(host, data, COOKIE_MAPPED);
|
|
if (sg_count < 0)
|
|
return sg_count;
|
|
|
|
dmaengine_slave_config(chan, &conf);
|
|
desc = dmaengine_prep_slave_sg(chan, data->sg, sg_count,
|
|
conf.direction,
|
|
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
|
|
if (!desc) {
|
|
dev_err(mmc_dev(host->mmc),
|
|
"Failed to allocate DMA %s descriptor",
|
|
conf.direction == DMA_MEM_TO_DEV ? "TX" : "RX");
|
|
goto dma_unmap;
|
|
}
|
|
|
|
dmaengine_submit(desc);
|
|
dma_async_issue_pending(chan);
|
|
|
|
return 0;
|
|
|
|
dma_unmap:
|
|
if (data->host_cookie == COOKIE_MAPPED)
|
|
jz4740_mmc_dma_unmap(host, data);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
static void jz4740_mmc_pre_request(struct mmc_host *mmc,
|
|
struct mmc_request *mrq)
|
|
{
|
|
struct jz4740_mmc_host *host = mmc_priv(mmc);
|
|
struct mmc_data *data = mrq->data;
|
|
|
|
if (!host->use_dma)
|
|
return;
|
|
|
|
data->host_cookie = COOKIE_UNMAPPED;
|
|
if (jz4740_mmc_prepare_dma_data(host, data, COOKIE_PREMAPPED) < 0)
|
|
data->host_cookie = COOKIE_UNMAPPED;
|
|
}
|
|
|
|
static void jz4740_mmc_post_request(struct mmc_host *mmc,
|
|
struct mmc_request *mrq,
|
|
int err)
|
|
{
|
|
struct jz4740_mmc_host *host = mmc_priv(mmc);
|
|
struct mmc_data *data = mrq->data;
|
|
|
|
if (data && data->host_cookie != COOKIE_UNMAPPED)
|
|
jz4740_mmc_dma_unmap(host, data);
|
|
|
|
if (err) {
|
|
struct dma_chan *chan = jz4740_mmc_get_dma_chan(host, data);
|
|
|
|
dmaengine_terminate_all(chan);
|
|
}
|
|
}
|
|
|
|
/*----------------------------------------------------------------------------*/
|
|
|
|
static void jz4740_mmc_set_irq_enabled(struct jz4740_mmc_host *host,
|
|
unsigned int irq, bool enabled)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&host->lock, flags);
|
|
if (enabled)
|
|
host->irq_mask &= ~irq;
|
|
else
|
|
host->irq_mask |= irq;
|
|
|
|
jz4740_mmc_write_irq_mask(host, host->irq_mask);
|
|
spin_unlock_irqrestore(&host->lock, flags);
|
|
}
|
|
|
|
static void jz4740_mmc_clock_enable(struct jz4740_mmc_host *host,
|
|
bool start_transfer)
|
|
{
|
|
uint16_t val = JZ_MMC_STRPCL_CLOCK_START;
|
|
|
|
if (start_transfer)
|
|
val |= JZ_MMC_STRPCL_START_OP;
|
|
|
|
writew(val, host->base + JZ_REG_MMC_STRPCL);
|
|
}
|
|
|
|
static void jz4740_mmc_clock_disable(struct jz4740_mmc_host *host)
|
|
{
|
|
uint32_t status;
|
|
unsigned int timeout = 1000;
|
|
|
|
writew(JZ_MMC_STRPCL_CLOCK_STOP, host->base + JZ_REG_MMC_STRPCL);
|
|
do {
|
|
status = readl(host->base + JZ_REG_MMC_STATUS);
|
|
} while (status & JZ_MMC_STATUS_CLK_EN && --timeout);
|
|
}
|
|
|
|
static void jz4740_mmc_reset(struct jz4740_mmc_host *host)
|
|
{
|
|
uint32_t status;
|
|
unsigned int timeout = 1000;
|
|
|
|
writew(JZ_MMC_STRPCL_RESET, host->base + JZ_REG_MMC_STRPCL);
|
|
udelay(10);
|
|
do {
|
|
status = readl(host->base + JZ_REG_MMC_STATUS);
|
|
} while (status & JZ_MMC_STATUS_IS_RESETTING && --timeout);
|
|
}
|
|
|
|
static void jz4740_mmc_request_done(struct jz4740_mmc_host *host)
|
|
{
|
|
struct mmc_request *req;
|
|
struct mmc_data *data;
|
|
|
|
req = host->req;
|
|
data = req->data;
|
|
host->req = NULL;
|
|
|
|
if (data && data->host_cookie == COOKIE_MAPPED)
|
|
jz4740_mmc_dma_unmap(host, data);
|
|
mmc_request_done(host->mmc, req);
|
|
}
|
|
|
|
static unsigned int jz4740_mmc_poll_irq(struct jz4740_mmc_host *host,
|
|
unsigned int irq)
|
|
{
|
|
unsigned int timeout = 0x800;
|
|
uint32_t status;
|
|
|
|
do {
|
|
status = jz4740_mmc_read_irq_reg(host);
|
|
} while (!(status & irq) && --timeout);
|
|
|
|
if (timeout == 0) {
|
|
set_bit(0, &host->waiting);
|
|
mod_timer(&host->timeout_timer,
|
|
jiffies + msecs_to_jiffies(JZ_MMC_REQ_TIMEOUT_MS));
|
|
jz4740_mmc_set_irq_enabled(host, irq, true);
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static void jz4740_mmc_transfer_check_state(struct jz4740_mmc_host *host,
|
|
struct mmc_data *data)
|
|
{
|
|
int status;
|
|
|
|
status = readl(host->base + JZ_REG_MMC_STATUS);
|
|
if (status & JZ_MMC_STATUS_WRITE_ERROR_MASK) {
|
|
if (status & (JZ_MMC_STATUS_TIMEOUT_WRITE)) {
|
|
host->req->cmd->error = -ETIMEDOUT;
|
|
data->error = -ETIMEDOUT;
|
|
} else {
|
|
host->req->cmd->error = -EIO;
|
|
data->error = -EIO;
|
|
}
|
|
} else if (status & JZ_MMC_STATUS_READ_ERROR_MASK) {
|
|
if (status & (JZ_MMC_STATUS_TIMEOUT_READ)) {
|
|
host->req->cmd->error = -ETIMEDOUT;
|
|
data->error = -ETIMEDOUT;
|
|
} else {
|
|
host->req->cmd->error = -EIO;
|
|
data->error = -EIO;
|
|
}
|
|
}
|
|
}
|
|
|
|
static bool jz4740_mmc_write_data(struct jz4740_mmc_host *host,
|
|
struct mmc_data *data)
|
|
{
|
|
struct sg_mapping_iter *miter = &host->miter;
|
|
void __iomem *fifo_addr = host->base + JZ_REG_MMC_TXFIFO;
|
|
uint32_t *buf;
|
|
bool timeout;
|
|
size_t i, j;
|
|
|
|
while (sg_miter_next(miter)) {
|
|
buf = miter->addr;
|
|
i = miter->length / 4;
|
|
j = i / 8;
|
|
i = i & 0x7;
|
|
while (j) {
|
|
timeout = jz4740_mmc_poll_irq(host, JZ_MMC_IRQ_TXFIFO_WR_REQ);
|
|
if (unlikely(timeout))
|
|
goto poll_timeout;
|
|
|
|
writel(buf[0], fifo_addr);
|
|
writel(buf[1], fifo_addr);
|
|
writel(buf[2], fifo_addr);
|
|
writel(buf[3], fifo_addr);
|
|
writel(buf[4], fifo_addr);
|
|
writel(buf[5], fifo_addr);
|
|
writel(buf[6], fifo_addr);
|
|
writel(buf[7], fifo_addr);
|
|
buf += 8;
|
|
--j;
|
|
}
|
|
if (unlikely(i)) {
|
|
timeout = jz4740_mmc_poll_irq(host, JZ_MMC_IRQ_TXFIFO_WR_REQ);
|
|
if (unlikely(timeout))
|
|
goto poll_timeout;
|
|
|
|
while (i) {
|
|
writel(*buf, fifo_addr);
|
|
++buf;
|
|
--i;
|
|
}
|
|
}
|
|
data->bytes_xfered += miter->length;
|
|
}
|
|
sg_miter_stop(miter);
|
|
|
|
return false;
|
|
|
|
poll_timeout:
|
|
miter->consumed = (void *)buf - miter->addr;
|
|
data->bytes_xfered += miter->consumed;
|
|
sg_miter_stop(miter);
|
|
|
|
return true;
|
|
}
|
|
|
|
static bool jz4740_mmc_read_data(struct jz4740_mmc_host *host,
|
|
struct mmc_data *data)
|
|
{
|
|
struct sg_mapping_iter *miter = &host->miter;
|
|
void __iomem *fifo_addr = host->base + JZ_REG_MMC_RXFIFO;
|
|
uint32_t *buf;
|
|
uint32_t d;
|
|
uint32_t status;
|
|
size_t i, j;
|
|
unsigned int timeout;
|
|
|
|
while (sg_miter_next(miter)) {
|
|
buf = miter->addr;
|
|
i = miter->length;
|
|
j = i / 32;
|
|
i = i & 0x1f;
|
|
while (j) {
|
|
timeout = jz4740_mmc_poll_irq(host, JZ_MMC_IRQ_RXFIFO_RD_REQ);
|
|
if (unlikely(timeout))
|
|
goto poll_timeout;
|
|
|
|
buf[0] = readl(fifo_addr);
|
|
buf[1] = readl(fifo_addr);
|
|
buf[2] = readl(fifo_addr);
|
|
buf[3] = readl(fifo_addr);
|
|
buf[4] = readl(fifo_addr);
|
|
buf[5] = readl(fifo_addr);
|
|
buf[6] = readl(fifo_addr);
|
|
buf[7] = readl(fifo_addr);
|
|
|
|
buf += 8;
|
|
--j;
|
|
}
|
|
|
|
if (unlikely(i)) {
|
|
timeout = jz4740_mmc_poll_irq(host, JZ_MMC_IRQ_RXFIFO_RD_REQ);
|
|
if (unlikely(timeout))
|
|
goto poll_timeout;
|
|
|
|
while (i >= 4) {
|
|
*buf++ = readl(fifo_addr);
|
|
i -= 4;
|
|
}
|
|
if (unlikely(i > 0)) {
|
|
d = readl(fifo_addr);
|
|
memcpy(buf, &d, i);
|
|
}
|
|
}
|
|
data->bytes_xfered += miter->length;
|
|
}
|
|
sg_miter_stop(miter);
|
|
|
|
/* For whatever reason there is sometime one word more in the fifo then
|
|
* requested */
|
|
timeout = 1000;
|
|
status = readl(host->base + JZ_REG_MMC_STATUS);
|
|
while (!(status & JZ_MMC_STATUS_DATA_FIFO_EMPTY) && --timeout) {
|
|
d = readl(fifo_addr);
|
|
status = readl(host->base + JZ_REG_MMC_STATUS);
|
|
}
|
|
|
|
return false;
|
|
|
|
poll_timeout:
|
|
miter->consumed = (void *)buf - miter->addr;
|
|
data->bytes_xfered += miter->consumed;
|
|
sg_miter_stop(miter);
|
|
|
|
return true;
|
|
}
|
|
|
|
static void jz4740_mmc_timeout(struct timer_list *t)
|
|
{
|
|
struct jz4740_mmc_host *host = from_timer(host, t, timeout_timer);
|
|
|
|
if (!test_and_clear_bit(0, &host->waiting))
|
|
return;
|
|
|
|
jz4740_mmc_set_irq_enabled(host, JZ_MMC_IRQ_END_CMD_RES, false);
|
|
|
|
host->req->cmd->error = -ETIMEDOUT;
|
|
jz4740_mmc_request_done(host);
|
|
}
|
|
|
|
static void jz4740_mmc_read_response(struct jz4740_mmc_host *host,
|
|
struct mmc_command *cmd)
|
|
{
|
|
int i;
|
|
uint16_t tmp;
|
|
void __iomem *fifo_addr = host->base + JZ_REG_MMC_RESP_FIFO;
|
|
|
|
if (cmd->flags & MMC_RSP_136) {
|
|
tmp = readw(fifo_addr);
|
|
for (i = 0; i < 4; ++i) {
|
|
cmd->resp[i] = tmp << 24;
|
|
tmp = readw(fifo_addr);
|
|
cmd->resp[i] |= tmp << 8;
|
|
tmp = readw(fifo_addr);
|
|
cmd->resp[i] |= tmp >> 8;
|
|
}
|
|
} else {
|
|
cmd->resp[0] = readw(fifo_addr) << 24;
|
|
cmd->resp[0] |= readw(fifo_addr) << 8;
|
|
cmd->resp[0] |= readw(fifo_addr) & 0xff;
|
|
}
|
|
}
|
|
|
|
static void jz4740_mmc_send_command(struct jz4740_mmc_host *host,
|
|
struct mmc_command *cmd)
|
|
{
|
|
uint32_t cmdat = host->cmdat;
|
|
|
|
host->cmdat &= ~JZ_MMC_CMDAT_INIT;
|
|
jz4740_mmc_clock_disable(host);
|
|
|
|
host->cmd = cmd;
|
|
|
|
if (cmd->flags & MMC_RSP_BUSY)
|
|
cmdat |= JZ_MMC_CMDAT_BUSY;
|
|
|
|
switch (mmc_resp_type(cmd)) {
|
|
case MMC_RSP_R1B:
|
|
case MMC_RSP_R1:
|
|
cmdat |= JZ_MMC_CMDAT_RSP_R1;
|
|
break;
|
|
case MMC_RSP_R2:
|
|
cmdat |= JZ_MMC_CMDAT_RSP_R2;
|
|
break;
|
|
case MMC_RSP_R3:
|
|
cmdat |= JZ_MMC_CMDAT_RSP_R3;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
if (cmd->data) {
|
|
cmdat |= JZ_MMC_CMDAT_DATA_EN;
|
|
if (cmd->data->flags & MMC_DATA_WRITE)
|
|
cmdat |= JZ_MMC_CMDAT_WRITE;
|
|
if (host->use_dma) {
|
|
/*
|
|
* The JZ4780's MMC controller has integrated DMA ability
|
|
* in addition to being able to use the external DMA
|
|
* controller. It moves DMA control bits to a separate
|
|
* register. The DMA_SEL bit chooses the external
|
|
* controller over the integrated one. Earlier SoCs
|
|
* can only use the external controller, and have a
|
|
* single DMA enable bit in CMDAT.
|
|
*/
|
|
if (host->version >= JZ_MMC_JZ4780) {
|
|
writel(JZ_MMC_DMAC_DMA_EN | JZ_MMC_DMAC_DMA_SEL,
|
|
host->base + JZ_REG_MMC_DMAC);
|
|
} else {
|
|
cmdat |= JZ_MMC_CMDAT_DMA_EN;
|
|
}
|
|
} else if (host->version >= JZ_MMC_JZ4780) {
|
|
writel(0, host->base + JZ_REG_MMC_DMAC);
|
|
}
|
|
|
|
writew(cmd->data->blksz, host->base + JZ_REG_MMC_BLKLEN);
|
|
writew(cmd->data->blocks, host->base + JZ_REG_MMC_NOB);
|
|
}
|
|
|
|
writeb(cmd->opcode, host->base + JZ_REG_MMC_CMD);
|
|
writel(cmd->arg, host->base + JZ_REG_MMC_ARG);
|
|
writel(cmdat, host->base + JZ_REG_MMC_CMDAT);
|
|
|
|
jz4740_mmc_clock_enable(host, 1);
|
|
}
|
|
|
|
static void jz_mmc_prepare_data_transfer(struct jz4740_mmc_host *host)
|
|
{
|
|
struct mmc_command *cmd = host->req->cmd;
|
|
struct mmc_data *data = cmd->data;
|
|
int direction;
|
|
|
|
if (data->flags & MMC_DATA_READ)
|
|
direction = SG_MITER_TO_SG;
|
|
else
|
|
direction = SG_MITER_FROM_SG;
|
|
|
|
sg_miter_start(&host->miter, data->sg, data->sg_len, direction);
|
|
}
|
|
|
|
|
|
static irqreturn_t jz_mmc_irq_worker(int irq, void *devid)
|
|
{
|
|
struct jz4740_mmc_host *host = (struct jz4740_mmc_host *)devid;
|
|
struct mmc_command *cmd = host->req->cmd;
|
|
struct mmc_request *req = host->req;
|
|
struct mmc_data *data = cmd->data;
|
|
bool timeout = false;
|
|
|
|
if (cmd->error)
|
|
host->state = JZ4740_MMC_STATE_DONE;
|
|
|
|
switch (host->state) {
|
|
case JZ4740_MMC_STATE_READ_RESPONSE:
|
|
if (cmd->flags & MMC_RSP_PRESENT)
|
|
jz4740_mmc_read_response(host, cmd);
|
|
|
|
if (!data)
|
|
break;
|
|
|
|
jz_mmc_prepare_data_transfer(host);
|
|
fallthrough;
|
|
|
|
case JZ4740_MMC_STATE_TRANSFER_DATA:
|
|
if (host->use_dma) {
|
|
/* Use DMA if enabled.
|
|
* Data transfer direction is defined later by
|
|
* relying on data flags in
|
|
* jz4740_mmc_prepare_dma_data() and
|
|
* jz4740_mmc_start_dma_transfer().
|
|
*/
|
|
timeout = jz4740_mmc_start_dma_transfer(host, data);
|
|
data->bytes_xfered = data->blocks * data->blksz;
|
|
} else if (data->flags & MMC_DATA_READ)
|
|
/* Use PIO if DMA is not enabled.
|
|
* Data transfer direction was defined before
|
|
* by relying on data flags in
|
|
* jz_mmc_prepare_data_transfer().
|
|
*/
|
|
timeout = jz4740_mmc_read_data(host, data);
|
|
else
|
|
timeout = jz4740_mmc_write_data(host, data);
|
|
|
|
if (unlikely(timeout)) {
|
|
host->state = JZ4740_MMC_STATE_TRANSFER_DATA;
|
|
break;
|
|
}
|
|
|
|
jz4740_mmc_transfer_check_state(host, data);
|
|
|
|
timeout = jz4740_mmc_poll_irq(host, JZ_MMC_IRQ_DATA_TRAN_DONE);
|
|
if (unlikely(timeout)) {
|
|
host->state = JZ4740_MMC_STATE_SEND_STOP;
|
|
break;
|
|
}
|
|
jz4740_mmc_write_irq_reg(host, JZ_MMC_IRQ_DATA_TRAN_DONE);
|
|
fallthrough;
|
|
|
|
case JZ4740_MMC_STATE_SEND_STOP:
|
|
if (!req->stop)
|
|
break;
|
|
|
|
jz4740_mmc_send_command(host, req->stop);
|
|
|
|
if (mmc_resp_type(req->stop) & MMC_RSP_BUSY) {
|
|
timeout = jz4740_mmc_poll_irq(host,
|
|
JZ_MMC_IRQ_PRG_DONE);
|
|
if (timeout) {
|
|
host->state = JZ4740_MMC_STATE_DONE;
|
|
break;
|
|
}
|
|
}
|
|
fallthrough;
|
|
|
|
case JZ4740_MMC_STATE_DONE:
|
|
break;
|
|
}
|
|
|
|
if (!timeout)
|
|
jz4740_mmc_request_done(host);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t jz_mmc_irq(int irq, void *devid)
|
|
{
|
|
struct jz4740_mmc_host *host = devid;
|
|
struct mmc_command *cmd = host->cmd;
|
|
uint32_t irq_reg, status, tmp;
|
|
|
|
status = readl(host->base + JZ_REG_MMC_STATUS);
|
|
irq_reg = jz4740_mmc_read_irq_reg(host);
|
|
|
|
tmp = irq_reg;
|
|
irq_reg &= ~host->irq_mask;
|
|
|
|
tmp &= ~(JZ_MMC_IRQ_TXFIFO_WR_REQ | JZ_MMC_IRQ_RXFIFO_RD_REQ |
|
|
JZ_MMC_IRQ_PRG_DONE | JZ_MMC_IRQ_DATA_TRAN_DONE);
|
|
|
|
if (tmp != irq_reg)
|
|
jz4740_mmc_write_irq_reg(host, tmp & ~irq_reg);
|
|
|
|
if (irq_reg & JZ_MMC_IRQ_SDIO) {
|
|
jz4740_mmc_write_irq_reg(host, JZ_MMC_IRQ_SDIO);
|
|
mmc_signal_sdio_irq(host->mmc);
|
|
irq_reg &= ~JZ_MMC_IRQ_SDIO;
|
|
}
|
|
|
|
if (host->req && cmd && irq_reg) {
|
|
if (test_and_clear_bit(0, &host->waiting)) {
|
|
del_timer(&host->timeout_timer);
|
|
|
|
if (status & JZ_MMC_STATUS_TIMEOUT_RES) {
|
|
cmd->error = -ETIMEDOUT;
|
|
} else if (status & JZ_MMC_STATUS_CRC_RES_ERR) {
|
|
cmd->error = -EIO;
|
|
} else if (status & (JZ_MMC_STATUS_CRC_READ_ERROR |
|
|
JZ_MMC_STATUS_CRC_WRITE_ERROR)) {
|
|
if (cmd->data)
|
|
cmd->data->error = -EIO;
|
|
cmd->error = -EIO;
|
|
}
|
|
|
|
jz4740_mmc_set_irq_enabled(host, irq_reg, false);
|
|
jz4740_mmc_write_irq_reg(host, irq_reg);
|
|
|
|
return IRQ_WAKE_THREAD;
|
|
}
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int jz4740_mmc_set_clock_rate(struct jz4740_mmc_host *host, int rate)
|
|
{
|
|
int div = 0;
|
|
int real_rate;
|
|
|
|
jz4740_mmc_clock_disable(host);
|
|
clk_set_rate(host->clk, host->mmc->f_max);
|
|
|
|
real_rate = clk_get_rate(host->clk);
|
|
|
|
while (real_rate > rate && div < 7) {
|
|
++div;
|
|
real_rate >>= 1;
|
|
}
|
|
|
|
writew(div, host->base + JZ_REG_MMC_CLKRT);
|
|
|
|
if (real_rate > 25000000) {
|
|
if (host->version >= JZ_MMC_JZ4780) {
|
|
writel(JZ_MMC_LPM_DRV_RISING_QTR_PHASE_DLY |
|
|
JZ_MMC_LPM_SMP_RISING_QTR_OR_HALF_PHASE_DLY |
|
|
JZ_MMC_LPM_LOW_POWER_MODE_EN,
|
|
host->base + JZ_REG_MMC_LPM);
|
|
} else if (host->version >= JZ_MMC_JZ4760) {
|
|
writel(JZ_MMC_LPM_DRV_RISING |
|
|
JZ_MMC_LPM_LOW_POWER_MODE_EN,
|
|
host->base + JZ_REG_MMC_LPM);
|
|
} else if (host->version >= JZ_MMC_JZ4725B)
|
|
writel(JZ_MMC_LPM_LOW_POWER_MODE_EN,
|
|
host->base + JZ_REG_MMC_LPM);
|
|
}
|
|
|
|
return real_rate;
|
|
}
|
|
|
|
static void jz4740_mmc_request(struct mmc_host *mmc, struct mmc_request *req)
|
|
{
|
|
struct jz4740_mmc_host *host = mmc_priv(mmc);
|
|
|
|
host->req = req;
|
|
|
|
jz4740_mmc_write_irq_reg(host, ~0);
|
|
jz4740_mmc_set_irq_enabled(host, JZ_MMC_IRQ_END_CMD_RES, true);
|
|
|
|
host->state = JZ4740_MMC_STATE_READ_RESPONSE;
|
|
set_bit(0, &host->waiting);
|
|
mod_timer(&host->timeout_timer,
|
|
jiffies + msecs_to_jiffies(JZ_MMC_REQ_TIMEOUT_MS));
|
|
jz4740_mmc_send_command(host, req->cmd);
|
|
}
|
|
|
|
static void jz4740_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
|
|
{
|
|
struct jz4740_mmc_host *host = mmc_priv(mmc);
|
|
int ret;
|
|
|
|
if (ios->clock)
|
|
jz4740_mmc_set_clock_rate(host, ios->clock);
|
|
|
|
switch (ios->power_mode) {
|
|
case MMC_POWER_UP:
|
|
jz4740_mmc_reset(host);
|
|
if (!IS_ERR(mmc->supply.vmmc))
|
|
mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd);
|
|
host->cmdat |= JZ_MMC_CMDAT_INIT;
|
|
clk_prepare_enable(host->clk);
|
|
break;
|
|
case MMC_POWER_ON:
|
|
if (!IS_ERR(mmc->supply.vqmmc) && !host->vqmmc_enabled) {
|
|
ret = regulator_enable(mmc->supply.vqmmc);
|
|
if (ret)
|
|
dev_err(&host->pdev->dev, "Failed to set vqmmc power!\n");
|
|
else
|
|
host->vqmmc_enabled = true;
|
|
}
|
|
break;
|
|
case MMC_POWER_OFF:
|
|
if (!IS_ERR(mmc->supply.vmmc))
|
|
mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
|
|
if (!IS_ERR(mmc->supply.vqmmc) && host->vqmmc_enabled) {
|
|
regulator_disable(mmc->supply.vqmmc);
|
|
host->vqmmc_enabled = false;
|
|
}
|
|
clk_disable_unprepare(host->clk);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
switch (ios->bus_width) {
|
|
case MMC_BUS_WIDTH_1:
|
|
host->cmdat &= ~JZ_MMC_CMDAT_BUS_WIDTH_MASK;
|
|
break;
|
|
case MMC_BUS_WIDTH_4:
|
|
host->cmdat &= ~JZ_MMC_CMDAT_BUS_WIDTH_MASK;
|
|
host->cmdat |= JZ_MMC_CMDAT_BUS_WIDTH_4BIT;
|
|
break;
|
|
case MMC_BUS_WIDTH_8:
|
|
host->cmdat &= ~JZ_MMC_CMDAT_BUS_WIDTH_MASK;
|
|
host->cmdat |= JZ_MMC_CMDAT_BUS_WIDTH_8BIT;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void jz4740_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
|
|
{
|
|
struct jz4740_mmc_host *host = mmc_priv(mmc);
|
|
jz4740_mmc_set_irq_enabled(host, JZ_MMC_IRQ_SDIO, enable);
|
|
}
|
|
|
|
static int jz4740_voltage_switch(struct mmc_host *mmc, struct mmc_ios *ios)
|
|
{
|
|
int ret;
|
|
|
|
/* vqmmc regulator is available */
|
|
if (!IS_ERR(mmc->supply.vqmmc)) {
|
|
ret = mmc_regulator_set_vqmmc(mmc, ios);
|
|
return ret < 0 ? ret : 0;
|
|
}
|
|
|
|
/* no vqmmc regulator, assume fixed regulator at 3/3.3V */
|
|
if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330)
|
|
return 0;
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static const struct mmc_host_ops jz4740_mmc_ops = {
|
|
.request = jz4740_mmc_request,
|
|
.pre_req = jz4740_mmc_pre_request,
|
|
.post_req = jz4740_mmc_post_request,
|
|
.set_ios = jz4740_mmc_set_ios,
|
|
.get_ro = mmc_gpio_get_ro,
|
|
.get_cd = mmc_gpio_get_cd,
|
|
.enable_sdio_irq = jz4740_mmc_enable_sdio_irq,
|
|
.start_signal_voltage_switch = jz4740_voltage_switch,
|
|
};
|
|
|
|
static const struct of_device_id jz4740_mmc_of_match[] = {
|
|
{ .compatible = "ingenic,jz4740-mmc", .data = (void *) JZ_MMC_JZ4740 },
|
|
{ .compatible = "ingenic,jz4725b-mmc", .data = (void *)JZ_MMC_JZ4725B },
|
|
{ .compatible = "ingenic,jz4760-mmc", .data = (void *) JZ_MMC_JZ4760 },
|
|
{ .compatible = "ingenic,jz4775-mmc", .data = (void *) JZ_MMC_JZ4780 },
|
|
{ .compatible = "ingenic,jz4780-mmc", .data = (void *) JZ_MMC_JZ4780 },
|
|
{ .compatible = "ingenic,x1000-mmc", .data = (void *) JZ_MMC_X1000 },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, jz4740_mmc_of_match);
|
|
|
|
static int jz4740_mmc_probe(struct platform_device* pdev)
|
|
{
|
|
int ret;
|
|
struct mmc_host *mmc;
|
|
struct jz4740_mmc_host *host;
|
|
|
|
mmc = mmc_alloc_host(sizeof(struct jz4740_mmc_host), &pdev->dev);
|
|
if (!mmc) {
|
|
dev_err(&pdev->dev, "Failed to alloc mmc host structure\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
host = mmc_priv(mmc);
|
|
|
|
/* Default if no match is JZ4740 */
|
|
host->version = (enum jz4740_mmc_version)device_get_match_data(&pdev->dev);
|
|
|
|
ret = mmc_of_parse(mmc);
|
|
if (ret) {
|
|
dev_err_probe(&pdev->dev, ret, "could not parse device properties\n");
|
|
goto err_free_host;
|
|
}
|
|
|
|
mmc_regulator_get_supply(mmc);
|
|
|
|
host->irq = platform_get_irq(pdev, 0);
|
|
if (host->irq < 0) {
|
|
ret = host->irq;
|
|
goto err_free_host;
|
|
}
|
|
|
|
host->clk = devm_clk_get(&pdev->dev, "mmc");
|
|
if (IS_ERR(host->clk)) {
|
|
ret = PTR_ERR(host->clk);
|
|
dev_err(&pdev->dev, "Failed to get mmc clock\n");
|
|
goto err_free_host;
|
|
}
|
|
|
|
host->base = devm_platform_get_and_ioremap_resource(pdev, 0, &host->mem_res);
|
|
if (IS_ERR(host->base)) {
|
|
ret = PTR_ERR(host->base);
|
|
goto err_free_host;
|
|
}
|
|
|
|
mmc->ops = &jz4740_mmc_ops;
|
|
if (!mmc->f_max)
|
|
mmc->f_max = JZ_MMC_CLK_RATE;
|
|
|
|
/*
|
|
* There seems to be a problem with this driver on the JZ4760 and
|
|
* JZ4760B SoCs. There, when using the maximum rate supported (50 MHz),
|
|
* the communication fails with many SD cards.
|
|
* Until this bug is sorted out, limit the maximum rate to 24 MHz.
|
|
*/
|
|
if (host->version == JZ_MMC_JZ4760 && mmc->f_max > JZ_MMC_CLK_RATE)
|
|
mmc->f_max = JZ_MMC_CLK_RATE;
|
|
|
|
mmc->f_min = mmc->f_max / 128;
|
|
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
|
|
|
|
/*
|
|
* We use a fixed timeout of 5s, hence inform the core about it. A
|
|
* future improvement should instead respect the cmd->busy_timeout.
|
|
*/
|
|
mmc->max_busy_timeout = JZ_MMC_REQ_TIMEOUT_MS;
|
|
|
|
mmc->max_blk_size = (1 << 10) - 1;
|
|
mmc->max_blk_count = (1 << 15) - 1;
|
|
mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
|
|
|
|
mmc->max_segs = 128;
|
|
mmc->max_seg_size = mmc->max_req_size;
|
|
|
|
host->mmc = mmc;
|
|
host->pdev = pdev;
|
|
spin_lock_init(&host->lock);
|
|
host->irq_mask = ~0;
|
|
|
|
jz4740_mmc_reset(host);
|
|
|
|
ret = request_threaded_irq(host->irq, jz_mmc_irq, jz_mmc_irq_worker, 0,
|
|
dev_name(&pdev->dev), host);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Failed to request irq: %d\n", ret);
|
|
goto err_free_host;
|
|
}
|
|
|
|
jz4740_mmc_clock_disable(host);
|
|
timer_setup(&host->timeout_timer, jz4740_mmc_timeout, 0);
|
|
|
|
ret = jz4740_mmc_acquire_dma_channels(host);
|
|
if (ret == -EPROBE_DEFER)
|
|
goto err_free_irq;
|
|
host->use_dma = !ret;
|
|
|
|
platform_set_drvdata(pdev, host);
|
|
ret = mmc_add_host(mmc);
|
|
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Failed to add mmc host: %d\n", ret);
|
|
goto err_release_dma;
|
|
}
|
|
dev_info(&pdev->dev, "Ingenic SD/MMC card driver registered\n");
|
|
|
|
dev_info(&pdev->dev, "Using %s, %d-bit mode\n",
|
|
host->use_dma ? "DMA" : "PIO",
|
|
(mmc->caps & MMC_CAP_8_BIT_DATA) ? 8 :
|
|
((mmc->caps & MMC_CAP_4_BIT_DATA) ? 4 : 1));
|
|
|
|
return 0;
|
|
|
|
err_release_dma:
|
|
if (host->use_dma)
|
|
jz4740_mmc_release_dma_channels(host);
|
|
err_free_irq:
|
|
free_irq(host->irq, host);
|
|
err_free_host:
|
|
mmc_free_host(mmc);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void jz4740_mmc_remove(struct platform_device *pdev)
|
|
{
|
|
struct jz4740_mmc_host *host = platform_get_drvdata(pdev);
|
|
|
|
del_timer_sync(&host->timeout_timer);
|
|
jz4740_mmc_set_irq_enabled(host, 0xff, false);
|
|
jz4740_mmc_reset(host);
|
|
|
|
mmc_remove_host(host->mmc);
|
|
|
|
free_irq(host->irq, host);
|
|
|
|
if (host->use_dma)
|
|
jz4740_mmc_release_dma_channels(host);
|
|
|
|
mmc_free_host(host->mmc);
|
|
}
|
|
|
|
static int jz4740_mmc_suspend(struct device *dev)
|
|
{
|
|
return pinctrl_pm_select_sleep_state(dev);
|
|
}
|
|
|
|
static int jz4740_mmc_resume(struct device *dev)
|
|
{
|
|
return pinctrl_select_default_state(dev);
|
|
}
|
|
|
|
static DEFINE_SIMPLE_DEV_PM_OPS(jz4740_mmc_pm_ops, jz4740_mmc_suspend,
|
|
jz4740_mmc_resume);
|
|
|
|
static struct platform_driver jz4740_mmc_driver = {
|
|
.probe = jz4740_mmc_probe,
|
|
.remove_new = jz4740_mmc_remove,
|
|
.driver = {
|
|
.name = "jz4740-mmc",
|
|
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
|
|
.of_match_table = jz4740_mmc_of_match,
|
|
.pm = pm_sleep_ptr(&jz4740_mmc_pm_ops),
|
|
},
|
|
};
|
|
|
|
module_platform_driver(jz4740_mmc_driver);
|
|
|
|
MODULE_DESCRIPTION("JZ4740 SD/MMC controller driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
|