..
asm-offsets.c
MN10300: fix SMP synchronization between txdma and serial driver
2012-12-12 15:46:14 +00:00
cevt-mn10300.c
mn10300: move setup_jiffies_interrupt() to cevt-mn10300.c
2012-07-11 16:04:41 -07:00
csrc-mn10300.c
MN10300: Use clocksource_register_hz()
2011-03-18 16:52:50 +00:00
entry.S
mn10300: Fix crash just after starting userspace on !CONFIG_PREEMPT
2013-09-10 14:54:59 -07:00
fpu-low.S
MN10300: Make the FPU operate in non-lazy mode under SMP
2010-10-27 17:28:52 +01:00
fpu-nofpu-low.S
MN10300: Make the FPU operate in non-lazy mode under SMP
2010-10-27 17:28:52 +01:00
fpu-nofpu.c
MN10300: Make the FPU operate in non-lazy mode under SMP
2010-10-27 17:28:52 +01:00
fpu.c
Disintegrate asm/system.h for MN10300
2012-03-28 18:30:02 +01:00
gdb-io-serial-low.S
MN10300: And Panasonic AM34 subarch and implement SMP
2010-10-27 17:28:55 +01:00
gdb-io-serial.c
Disintegrate asm/system.h for MN10300
2012-03-28 18:30:02 +01:00
gdb-io-ttysm-low.S
Separate out the proc- and unit-specific header directories from the general
2009-04-10 14:33:48 +01:00
gdb-io-ttysm.c
Disintegrate asm/system.h for MN10300
2012-03-28 18:30:02 +01:00
gdb-low.S
gdb-stub.c
Disintegrate asm/system.h for MN10300
2012-03-28 18:30:02 +01:00
head.S
MN10300: And Panasonic AM34 subarch and implement SMP
2010-10-27 17:28:55 +01:00
internal.h
mn10300: split ret_from_fork, simplify kernel_thread()
2012-10-01 00:53:24 -04:00
io.c
irq.c
MN10300: cleanup IRQ affinity setting
2012-12-12 15:46:14 +00:00
kgdb.c
mn10300: Use common threadinfo allocator
2012-05-08 14:08:45 +02:00
kprobes.c
MN10300: Allow some cacheflushes to be avoided if cache snooping is available
2010-10-27 17:28:46 +01:00
Makefile
mn10300: switch to generic kernel_execve()
2012-10-01 00:53:59 -04:00
mn10300_ksyms.c
mn10300: provide __ucmpdi2() for MN10300
2008-07-04 10:40:07 -07:00
mn10300-debug.c
mn10300-serial-low.S
MN10300: fix SMP synchronization between txdma and serial driver
2012-12-12 15:46:14 +00:00
mn10300-serial.c
TTY: mn10300-serial, fix build breakage
2013-01-16 07:36:47 -08:00
mn10300-serial.h
MN10300: ttySM: clean up unnecessary casting
2012-12-12 15:46:14 +00:00
mn10300-watchdog-low.S
MN10300: And Panasonic AM34 subarch and implement SMP
2010-10-27 17:28:55 +01:00
mn10300-watchdog.c
Disintegrate asm/system.h for MN10300
2012-03-28 18:30:02 +01:00
module.c
modules: make arch's use default loader hooks
2011-07-24 22:06:04 +09:30
process.c
dump_stack: unify debug information printed by show_regs()
2013-04-30 17:04:02 -07:00
profile-low.S
profile.c
MN10300: And Panasonic AM34 subarch and implement SMP
2010-10-27 17:28:55 +01:00
ptrace.c
Disintegrate asm/system.h for MN10300
2012-03-28 18:30:02 +01:00
rtc.c
set_rtc_mmss: show warning message only once
2011-01-13 08:03:07 -08:00
setup.c
mn10300: Use early_param() to parse "mem=" parameter
2013-06-28 16:53:03 +01:00
sigframe.h
signal.c
mn10300: switch to generic old sigaction()
2013-02-03 18:16:04 -05:00
smp-low.S
Disintegrate asm/system.h for MN10300
2012-03-28 18:30:02 +01:00
smp.c
mn10300: Use generic idle loop
2013-04-08 17:39:27 +02:00
switch_to.S
MN10300: Emulate single stepping in KGDB on MN10300
2011-03-18 16:54:32 +00:00
sys_mn10300.c
Add generic sys_ipc wrapper
2010-03-12 15:52:32 -08:00
time.c
MN10300: Use clockevents_calc_mult_shift()
2011-03-18 16:52:50 +00:00
traps.c
dump_stack: consolidate dump_stack() implementations and unify their behaviors
2013-04-30 17:04:02 -07:00
vmlinux.lds.S
MN10300: Add missing _sdata declaration
2011-06-07 19:03:53 -07:00