mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-19 02:04:19 +08:00
618b26d528
This patch suppresses I2C device probing by clearing the class field of the "struct i2c_adapter" for the MPC I2C bus adapters. Some board configurations which rely on probing must be fixed up by adding a proper I2C device node to the DTS file, like the TQM85xx modules. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
438 lines
9.8 KiB
C
438 lines
9.8 KiB
C
/*
|
|
* (C) Copyright 2003-2004
|
|
* Humboldt Solutions Ltd, adrian@humboldt.co.uk.
|
|
|
|
* This is a combined i2c adapter and algorithm driver for the
|
|
* MPC107/Tsi107 PowerPC northbridge and processors that include
|
|
* the same I2C unit (8240, 8245, 85xx).
|
|
*
|
|
* Release 0.8
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public
|
|
* License version 2. This program is licensed "as is" without any
|
|
* warranty of any kind, whether express or implied.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/init.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/of_i2c.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <linux/fsl_devices.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/delay.h>
|
|
|
|
#define DRV_NAME "mpc-i2c"
|
|
|
|
#define MPC_I2C_FDR 0x04
|
|
#define MPC_I2C_CR 0x08
|
|
#define MPC_I2C_SR 0x0c
|
|
#define MPC_I2C_DR 0x10
|
|
#define MPC_I2C_DFSRR 0x14
|
|
|
|
#define CCR_MEN 0x80
|
|
#define CCR_MIEN 0x40
|
|
#define CCR_MSTA 0x20
|
|
#define CCR_MTX 0x10
|
|
#define CCR_TXAK 0x08
|
|
#define CCR_RSTA 0x04
|
|
|
|
#define CSR_MCF 0x80
|
|
#define CSR_MAAS 0x40
|
|
#define CSR_MBB 0x20
|
|
#define CSR_MAL 0x10
|
|
#define CSR_SRW 0x04
|
|
#define CSR_MIF 0x02
|
|
#define CSR_RXAK 0x01
|
|
|
|
struct mpc_i2c {
|
|
void __iomem *base;
|
|
u32 interrupt;
|
|
wait_queue_head_t queue;
|
|
struct i2c_adapter adap;
|
|
int irq;
|
|
u32 flags;
|
|
};
|
|
|
|
static __inline__ void writeccr(struct mpc_i2c *i2c, u32 x)
|
|
{
|
|
writeb(x, i2c->base + MPC_I2C_CR);
|
|
}
|
|
|
|
static irqreturn_t mpc_i2c_isr(int irq, void *dev_id)
|
|
{
|
|
struct mpc_i2c *i2c = dev_id;
|
|
if (readb(i2c->base + MPC_I2C_SR) & CSR_MIF) {
|
|
/* Read again to allow register to stabilise */
|
|
i2c->interrupt = readb(i2c->base + MPC_I2C_SR);
|
|
writeb(0, i2c->base + MPC_I2C_SR);
|
|
wake_up_interruptible(&i2c->queue);
|
|
}
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* Sometimes 9th clock pulse isn't generated, and slave doesn't release
|
|
* the bus, because it wants to send ACK.
|
|
* Following sequence of enabling/disabling and sending start/stop generates
|
|
* the pulse, so it's all OK.
|
|
*/
|
|
static void mpc_i2c_fixup(struct mpc_i2c *i2c)
|
|
{
|
|
writeccr(i2c, 0);
|
|
udelay(30);
|
|
writeccr(i2c, CCR_MEN);
|
|
udelay(30);
|
|
writeccr(i2c, CCR_MSTA | CCR_MTX);
|
|
udelay(30);
|
|
writeccr(i2c, CCR_MSTA | CCR_MTX | CCR_MEN);
|
|
udelay(30);
|
|
writeccr(i2c, CCR_MEN);
|
|
udelay(30);
|
|
}
|
|
|
|
static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
|
|
{
|
|
unsigned long orig_jiffies = jiffies;
|
|
u32 x;
|
|
int result = 0;
|
|
|
|
if (i2c->irq == NO_IRQ)
|
|
{
|
|
while (!(readb(i2c->base + MPC_I2C_SR) & CSR_MIF)) {
|
|
schedule();
|
|
if (time_after(jiffies, orig_jiffies + timeout)) {
|
|
pr_debug("I2C: timeout\n");
|
|
writeccr(i2c, 0);
|
|
result = -EIO;
|
|
break;
|
|
}
|
|
}
|
|
x = readb(i2c->base + MPC_I2C_SR);
|
|
writeb(0, i2c->base + MPC_I2C_SR);
|
|
} else {
|
|
/* Interrupt mode */
|
|
result = wait_event_interruptible_timeout(i2c->queue,
|
|
(i2c->interrupt & CSR_MIF), timeout * HZ);
|
|
|
|
if (unlikely(result < 0)) {
|
|
pr_debug("I2C: wait interrupted\n");
|
|
writeccr(i2c, 0);
|
|
} else if (unlikely(!(i2c->interrupt & CSR_MIF))) {
|
|
pr_debug("I2C: wait timeout\n");
|
|
writeccr(i2c, 0);
|
|
result = -ETIMEDOUT;
|
|
}
|
|
|
|
x = i2c->interrupt;
|
|
i2c->interrupt = 0;
|
|
}
|
|
|
|
if (result < 0)
|
|
return result;
|
|
|
|
if (!(x & CSR_MCF)) {
|
|
pr_debug("I2C: unfinished\n");
|
|
return -EIO;
|
|
}
|
|
|
|
if (x & CSR_MAL) {
|
|
pr_debug("I2C: MAL\n");
|
|
return -EIO;
|
|
}
|
|
|
|
if (writing && (x & CSR_RXAK)) {
|
|
pr_debug("I2C: No RXAK\n");
|
|
/* generate stop */
|
|
writeccr(i2c, CCR_MEN);
|
|
return -EIO;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void mpc_i2c_setclock(struct mpc_i2c *i2c)
|
|
{
|
|
/* Set clock and filters */
|
|
if (i2c->flags & FSL_I2C_DEV_SEPARATE_DFSRR) {
|
|
writeb(0x31, i2c->base + MPC_I2C_FDR);
|
|
writeb(0x10, i2c->base + MPC_I2C_DFSRR);
|
|
} else if (i2c->flags & FSL_I2C_DEV_CLOCK_5200)
|
|
writeb(0x3f, i2c->base + MPC_I2C_FDR);
|
|
else
|
|
writel(0x1031, i2c->base + MPC_I2C_FDR);
|
|
}
|
|
|
|
static void mpc_i2c_start(struct mpc_i2c *i2c)
|
|
{
|
|
/* Clear arbitration */
|
|
writeb(0, i2c->base + MPC_I2C_SR);
|
|
/* Start with MEN */
|
|
writeccr(i2c, CCR_MEN);
|
|
}
|
|
|
|
static void mpc_i2c_stop(struct mpc_i2c *i2c)
|
|
{
|
|
writeccr(i2c, CCR_MEN);
|
|
}
|
|
|
|
static int mpc_write(struct mpc_i2c *i2c, int target,
|
|
const u8 * data, int length, int restart)
|
|
{
|
|
int i, result;
|
|
unsigned timeout = i2c->adap.timeout;
|
|
u32 flags = restart ? CCR_RSTA : 0;
|
|
|
|
/* Start with MEN */
|
|
if (!restart)
|
|
writeccr(i2c, CCR_MEN);
|
|
/* Start as master */
|
|
writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_MTX | flags);
|
|
/* Write target byte */
|
|
writeb((target << 1), i2c->base + MPC_I2C_DR);
|
|
|
|
result = i2c_wait(i2c, timeout, 1);
|
|
if (result < 0)
|
|
return result;
|
|
|
|
for (i = 0; i < length; i++) {
|
|
/* Write data byte */
|
|
writeb(data[i], i2c->base + MPC_I2C_DR);
|
|
|
|
result = i2c_wait(i2c, timeout, 1);
|
|
if (result < 0)
|
|
return result;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mpc_read(struct mpc_i2c *i2c, int target,
|
|
u8 * data, int length, int restart)
|
|
{
|
|
unsigned timeout = i2c->adap.timeout;
|
|
int i, result;
|
|
u32 flags = restart ? CCR_RSTA : 0;
|
|
|
|
/* Start with MEN */
|
|
if (!restart)
|
|
writeccr(i2c, CCR_MEN);
|
|
/* Switch to read - restart */
|
|
writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_MTX | flags);
|
|
/* Write target address byte - this time with the read flag set */
|
|
writeb((target << 1) | 1, i2c->base + MPC_I2C_DR);
|
|
|
|
result = i2c_wait(i2c, timeout, 1);
|
|
if (result < 0)
|
|
return result;
|
|
|
|
if (length) {
|
|
if (length == 1)
|
|
writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_TXAK);
|
|
else
|
|
writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA);
|
|
/* Dummy read */
|
|
readb(i2c->base + MPC_I2C_DR);
|
|
}
|
|
|
|
for (i = 0; i < length; i++) {
|
|
result = i2c_wait(i2c, timeout, 0);
|
|
if (result < 0)
|
|
return result;
|
|
|
|
/* Generate txack on next to last byte */
|
|
if (i == length - 2)
|
|
writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_TXAK);
|
|
/* Generate stop on last byte */
|
|
if (i == length - 1)
|
|
writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_TXAK);
|
|
data[i] = readb(i2c->base + MPC_I2C_DR);
|
|
}
|
|
|
|
return length;
|
|
}
|
|
|
|
static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
|
|
{
|
|
struct i2c_msg *pmsg;
|
|
int i;
|
|
int ret = 0;
|
|
unsigned long orig_jiffies = jiffies;
|
|
struct mpc_i2c *i2c = i2c_get_adapdata(adap);
|
|
|
|
mpc_i2c_start(i2c);
|
|
|
|
/* Allow bus up to 1s to become not busy */
|
|
while (readb(i2c->base + MPC_I2C_SR) & CSR_MBB) {
|
|
if (signal_pending(current)) {
|
|
pr_debug("I2C: Interrupted\n");
|
|
writeccr(i2c, 0);
|
|
return -EINTR;
|
|
}
|
|
if (time_after(jiffies, orig_jiffies + HZ)) {
|
|
pr_debug("I2C: timeout\n");
|
|
if (readb(i2c->base + MPC_I2C_SR) ==
|
|
(CSR_MCF | CSR_MBB | CSR_RXAK))
|
|
mpc_i2c_fixup(i2c);
|
|
return -EIO;
|
|
}
|
|
schedule();
|
|
}
|
|
|
|
for (i = 0; ret >= 0 && i < num; i++) {
|
|
pmsg = &msgs[i];
|
|
pr_debug("Doing %s %d bytes to 0x%02x - %d of %d messages\n",
|
|
pmsg->flags & I2C_M_RD ? "read" : "write",
|
|
pmsg->len, pmsg->addr, i + 1, num);
|
|
if (pmsg->flags & I2C_M_RD)
|
|
ret =
|
|
mpc_read(i2c, pmsg->addr, pmsg->buf, pmsg->len, i);
|
|
else
|
|
ret =
|
|
mpc_write(i2c, pmsg->addr, pmsg->buf, pmsg->len, i);
|
|
}
|
|
mpc_i2c_stop(i2c);
|
|
return (ret < 0) ? ret : num;
|
|
}
|
|
|
|
static u32 mpc_functionality(struct i2c_adapter *adap)
|
|
{
|
|
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
|
|
}
|
|
|
|
static const struct i2c_algorithm mpc_algo = {
|
|
.master_xfer = mpc_xfer,
|
|
.functionality = mpc_functionality,
|
|
};
|
|
|
|
static struct i2c_adapter mpc_ops = {
|
|
.owner = THIS_MODULE,
|
|
.name = "MPC adapter",
|
|
.id = I2C_HW_MPC107,
|
|
.algo = &mpc_algo,
|
|
.timeout = 1,
|
|
};
|
|
|
|
static int __devinit fsl_i2c_probe(struct of_device *op, const struct of_device_id *match)
|
|
{
|
|
int result = 0;
|
|
struct mpc_i2c *i2c;
|
|
|
|
i2c = kzalloc(sizeof(*i2c), GFP_KERNEL);
|
|
if (!i2c)
|
|
return -ENOMEM;
|
|
|
|
if (of_get_property(op->node, "dfsrr", NULL))
|
|
i2c->flags |= FSL_I2C_DEV_SEPARATE_DFSRR;
|
|
|
|
if (of_device_is_compatible(op->node, "fsl,mpc5200-i2c") ||
|
|
of_device_is_compatible(op->node, "mpc5200-i2c"))
|
|
i2c->flags |= FSL_I2C_DEV_CLOCK_5200;
|
|
|
|
init_waitqueue_head(&i2c->queue);
|
|
|
|
i2c->base = of_iomap(op->node, 0);
|
|
if (!i2c->base) {
|
|
printk(KERN_ERR "i2c-mpc - failed to map controller\n");
|
|
result = -ENOMEM;
|
|
goto fail_map;
|
|
}
|
|
|
|
i2c->irq = irq_of_parse_and_map(op->node, 0);
|
|
if (i2c->irq != NO_IRQ) { /* i2c->irq = NO_IRQ implies polling */
|
|
result = request_irq(i2c->irq, mpc_i2c_isr,
|
|
IRQF_SHARED, "i2c-mpc", i2c);
|
|
if (result < 0) {
|
|
printk(KERN_ERR "i2c-mpc - failed to attach interrupt\n");
|
|
goto fail_request;
|
|
}
|
|
}
|
|
|
|
mpc_i2c_setclock(i2c);
|
|
|
|
dev_set_drvdata(&op->dev, i2c);
|
|
|
|
i2c->adap = mpc_ops;
|
|
i2c_set_adapdata(&i2c->adap, i2c);
|
|
i2c->adap.dev.parent = &op->dev;
|
|
|
|
result = i2c_add_adapter(&i2c->adap);
|
|
if (result < 0) {
|
|
printk(KERN_ERR "i2c-mpc - failed to add adapter\n");
|
|
goto fail_add;
|
|
}
|
|
of_register_i2c_devices(&i2c->adap, op->node);
|
|
|
|
return result;
|
|
|
|
fail_add:
|
|
dev_set_drvdata(&op->dev, NULL);
|
|
free_irq(i2c->irq, i2c);
|
|
fail_request:
|
|
irq_dispose_mapping(i2c->irq);
|
|
iounmap(i2c->base);
|
|
fail_map:
|
|
kfree(i2c);
|
|
return result;
|
|
};
|
|
|
|
static int __devexit fsl_i2c_remove(struct of_device *op)
|
|
{
|
|
struct mpc_i2c *i2c = dev_get_drvdata(&op->dev);
|
|
|
|
i2c_del_adapter(&i2c->adap);
|
|
dev_set_drvdata(&op->dev, NULL);
|
|
|
|
if (i2c->irq != NO_IRQ)
|
|
free_irq(i2c->irq, i2c);
|
|
|
|
irq_dispose_mapping(i2c->irq);
|
|
iounmap(i2c->base);
|
|
kfree(i2c);
|
|
return 0;
|
|
};
|
|
|
|
static const struct of_device_id mpc_i2c_of_match[] = {
|
|
{.compatible = "fsl-i2c",},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mpc_i2c_of_match);
|
|
|
|
|
|
/* Structure for a device driver */
|
|
static struct of_platform_driver mpc_i2c_driver = {
|
|
.match_table = mpc_i2c_of_match,
|
|
.probe = fsl_i2c_probe,
|
|
.remove = __devexit_p(fsl_i2c_remove),
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = DRV_NAME,
|
|
},
|
|
};
|
|
|
|
static int __init fsl_i2c_init(void)
|
|
{
|
|
int rv;
|
|
|
|
rv = of_register_platform_driver(&mpc_i2c_driver);
|
|
if (rv)
|
|
printk(KERN_ERR DRV_NAME
|
|
" of_register_platform_driver failed (%i)\n", rv);
|
|
return rv;
|
|
}
|
|
|
|
static void __exit fsl_i2c_exit(void)
|
|
{
|
|
of_unregister_platform_driver(&mpc_i2c_driver);
|
|
}
|
|
|
|
module_init(fsl_i2c_init);
|
|
module_exit(fsl_i2c_exit);
|
|
|
|
MODULE_AUTHOR("Adrian Cox <adrian@humboldt.co.uk>");
|
|
MODULE_DESCRIPTION
|
|
("I2C-Bus adapter for MPC107 bridge and MPC824x/85xx/52xx processors");
|
|
MODULE_LICENSE("GPL");
|