mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-28 21:45:01 +08:00
1809136044
- Add SPI controllers for all the SoCs - Add various missing aliases - Add USB clocks nodes - Addition of the GMAC support - Introduction of the pcDuino board - A few DT cleanup patches: change of compatibles, -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.14 (GNU/Linux) iQIcBAABAgAGBQJTFFhJAAoJEBx+YmzsjxAgFfsQALAcX5Vyw6Qi7vOQEipsY/Cv spaokviWKhanViYNDxMt0Q03rHUNIYbGD9bQA6V+dw5k4LFX1ww3BPQhlQm4kAw/ MjGTdD+Mgg2cwdGw3YvT3hot2iYgy3HOxEdA9UPX1SKPAVmyoKk5SasZr7Lb+6zk N2Ezpz8+erE8WVrg/2SoP91LoU13vJX0Z9hsiBUCjRtYS75Zs7qF6hf03oqYg+EK j0vp3f1NdVIMItS/4UlBz4lqwNWJRQb2Q1JX0BKI9ITBGv7RlNcJoe3A/qKpqtAf jb1cvld2orj9a677PDvQbYfarUcWpJEckp5ypTl33i4amzQbCYhZRY+kmltKQmsY iaJa+OYHCRgZgzE7kBll3WG/69BoV+9g56bqRD0+kudXZoD2JIEb6sDYjBiGqNh/ vwSvdDR1Pblw9Af9fGe8OK5E0/RJQWzT0PQLZnPDfPDLk5LxuQsytYhujrHZExte eYIUm9M8g9f5UAA70bSO2HjNmVUdS2kmFp09GaObOfqLZBp5vHCxQpAeY20tyQ1z 0bcrqK+RTN8EvyjWuGyr8sMReZclKsOi/KrO6kgvVtTUMH1tt7v4OxxrZv99sdQv tA4wk9R4gs+owKh/DTkSMj91vLgzk/e+DoNhLp1oAHlU/qX2/AOSfzKTnhUh4cML zFsZzST0/kSXs3lU2UPN =mXsD -----END PGP SIGNATURE----- Merge tag 'sunxi-dt-for-3.15' of https://github.com/mripard/linux into next/dt Allwinner DT patches for 3.15, take 1 from Maxime Ripard: - Add SPI controllers for all the SoCs - Add various missing aliases - Add USB clocks nodes - Addition of the GMAC support - Introduction of the pcDuino board - A few DT cleanup patches: change of compatibles, * tag 'sunxi-dt-for-3.15' of https://github.com/mripard/linux: (33 commits) ARM: sun6i: dt: Fix mod0 compatible ARM: dts: sun7i: Enable the SPI controllers of the A20-olinuxino-micro ARM: dt: sun7i: Add SPI muxing options ARM: dt: sun5i: Add A13 SPI controller nodes ARM: dt: sun5i: Add A10s SPI controller nodes ARM: dt: sun4i: Add A10 SPI controller nodes ARM: dt: sun7i: Add A20 SPI controller nodes ARM: sun4i: dt: Remove grouping + simple-bus compatible for regulators ARM: sunxi: dt: Convert to the new clock compatibles ARM: sun7i: add arch timer node ARM: sun7i: dt: Add bindings for USB clocks ARM: sun5i: dt: Add bindings for USB clocks ARM: sun4i: dt: Add bindings for USB clocks ARM: dts: sun7i: Add ethernet alias for GMAC ARM: dts: sun7i: a20-olinuxino-micro: Enable GMAC instead of EMAC ARM: dts: sun7i: cubieboard2: Enable GMAC instead of EMAC ARM: dts: sun7i: cubietruck: Enable the GMAC ARM: dts: sun7i: Add pin muxing options for the GMAC ARM: dts: sun7i: Add GMAC controller node to sun7i DTSI ARM: dts: sun7i: Add GMAC clock node to sun7i DTSI ... Signed-off-by: Olof Johansson <olof@lixom.net>
786 lines
18 KiB
Plaintext
786 lines
18 KiB
Plaintext
/*
|
|
* Copyright 2013 Maxime Ripard
|
|
*
|
|
* Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
*
|
|
* The code contained herein is licensed under the GNU General Public
|
|
* License. You may obtain a copy of the GNU General Public License
|
|
* Version 2 or later at the following locations:
|
|
*
|
|
* http://www.opensource.org/licenses/gpl-license.html
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
*/
|
|
|
|
/include/ "skeleton.dtsi"
|
|
|
|
/ {
|
|
interrupt-parent = <&gic>;
|
|
|
|
aliases {
|
|
ethernet0 = &gmac;
|
|
serial0 = &uart0;
|
|
serial1 = &uart1;
|
|
serial2 = &uart2;
|
|
serial3 = &uart3;
|
|
serial4 = &uart4;
|
|
serial5 = &uart5;
|
|
serial6 = &uart6;
|
|
serial7 = &uart7;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@0 {
|
|
compatible = "arm,cortex-a7";
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
};
|
|
|
|
cpu@1 {
|
|
compatible = "arm,cortex-a7";
|
|
device_type = "cpu";
|
|
reg = <1>;
|
|
};
|
|
};
|
|
|
|
memory {
|
|
reg = <0x40000000 0x80000000>;
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv7-timer";
|
|
interrupts = <1 13 0xf08>,
|
|
<1 14 0xf08>,
|
|
<1 11 0xf08>,
|
|
<1 10 0xf08>;
|
|
};
|
|
|
|
clocks {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
osc24M: clk@01c20050 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-osc-clk";
|
|
reg = <0x01c20050 0x4>;
|
|
clock-frequency = <24000000>;
|
|
clock-output-names = "osc24M";
|
|
};
|
|
|
|
osc32k: clk@0 {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <32768>;
|
|
clock-output-names = "osc32k";
|
|
};
|
|
|
|
pll1: clk@01c20000 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-pll1-clk";
|
|
reg = <0x01c20000 0x4>;
|
|
clocks = <&osc24M>;
|
|
clock-output-names = "pll1";
|
|
};
|
|
|
|
pll4: clk@01c20018 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-pll1-clk";
|
|
reg = <0x01c20018 0x4>;
|
|
clocks = <&osc24M>;
|
|
clock-output-names = "pll4";
|
|
};
|
|
|
|
pll5: clk@01c20020 {
|
|
#clock-cells = <1>;
|
|
compatible = "allwinner,sun4i-a10-pll5-clk";
|
|
reg = <0x01c20020 0x4>;
|
|
clocks = <&osc24M>;
|
|
clock-output-names = "pll5_ddr", "pll5_other";
|
|
};
|
|
|
|
pll6: clk@01c20028 {
|
|
#clock-cells = <1>;
|
|
compatible = "allwinner,sun4i-a10-pll6-clk";
|
|
reg = <0x01c20028 0x4>;
|
|
clocks = <&osc24M>;
|
|
clock-output-names = "pll6_sata", "pll6_other", "pll6";
|
|
};
|
|
|
|
cpu: cpu@01c20054 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-cpu-clk";
|
|
reg = <0x01c20054 0x4>;
|
|
clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll6 1>;
|
|
clock-output-names = "cpu";
|
|
};
|
|
|
|
axi: axi@01c20054 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-axi-clk";
|
|
reg = <0x01c20054 0x4>;
|
|
clocks = <&cpu>;
|
|
clock-output-names = "axi";
|
|
};
|
|
|
|
ahb: ahb@01c20054 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-ahb-clk";
|
|
reg = <0x01c20054 0x4>;
|
|
clocks = <&axi>;
|
|
clock-output-names = "ahb";
|
|
};
|
|
|
|
ahb_gates: clk@01c20060 {
|
|
#clock-cells = <1>;
|
|
compatible = "allwinner,sun7i-a20-ahb-gates-clk";
|
|
reg = <0x01c20060 0x8>;
|
|
clocks = <&ahb>;
|
|
clock-output-names = "ahb_usb0", "ahb_ehci0",
|
|
"ahb_ohci0", "ahb_ehci1", "ahb_ohci1",
|
|
"ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
|
|
"ahb_mmc1", "ahb_mmc2", "ahb_mmc3", "ahb_ms",
|
|
"ahb_nand", "ahb_sdram", "ahb_ace",
|
|
"ahb_emac", "ahb_ts", "ahb_spi0", "ahb_spi1",
|
|
"ahb_spi2", "ahb_spi3", "ahb_sata",
|
|
"ahb_hstimer", "ahb_ve", "ahb_tvd", "ahb_tve0",
|
|
"ahb_tve1", "ahb_lcd0", "ahb_lcd1", "ahb_csi0",
|
|
"ahb_csi1", "ahb_hdmi1", "ahb_hdmi0",
|
|
"ahb_de_be0", "ahb_de_be1", "ahb_de_fe0",
|
|
"ahb_de_fe1", "ahb_gmac", "ahb_mp",
|
|
"ahb_mali";
|
|
};
|
|
|
|
apb0: apb0@01c20054 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-apb0-clk";
|
|
reg = <0x01c20054 0x4>;
|
|
clocks = <&ahb>;
|
|
clock-output-names = "apb0";
|
|
};
|
|
|
|
apb0_gates: clk@01c20068 {
|
|
#clock-cells = <1>;
|
|
compatible = "allwinner,sun7i-a20-apb0-gates-clk";
|
|
reg = <0x01c20068 0x4>;
|
|
clocks = <&apb0>;
|
|
clock-output-names = "apb0_codec", "apb0_spdif",
|
|
"apb0_ac97", "apb0_iis0", "apb0_iis1",
|
|
"apb0_pio", "apb0_ir0", "apb0_ir1",
|
|
"apb0_iis2", "apb0_keypad";
|
|
};
|
|
|
|
apb1_mux: apb1_mux@01c20058 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-apb1-mux-clk";
|
|
reg = <0x01c20058 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
|
|
clock-output-names = "apb1_mux";
|
|
};
|
|
|
|
apb1: apb1@01c20058 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-apb1-clk";
|
|
reg = <0x01c20058 0x4>;
|
|
clocks = <&apb1_mux>;
|
|
clock-output-names = "apb1";
|
|
};
|
|
|
|
apb1_gates: clk@01c2006c {
|
|
#clock-cells = <1>;
|
|
compatible = "allwinner,sun7i-a20-apb1-gates-clk";
|
|
reg = <0x01c2006c 0x4>;
|
|
clocks = <&apb1>;
|
|
clock-output-names = "apb1_i2c0", "apb1_i2c1",
|
|
"apb1_i2c2", "apb1_i2c3", "apb1_can",
|
|
"apb1_scr", "apb1_ps20", "apb1_ps21",
|
|
"apb1_i2c4", "apb1_uart0", "apb1_uart1",
|
|
"apb1_uart2", "apb1_uart3", "apb1_uart4",
|
|
"apb1_uart5", "apb1_uart6", "apb1_uart7";
|
|
};
|
|
|
|
nand_clk: clk@01c20080 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c20080 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "nand";
|
|
};
|
|
|
|
ms_clk: clk@01c20084 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c20084 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "ms";
|
|
};
|
|
|
|
mmc0_clk: clk@01c20088 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c20088 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "mmc0";
|
|
};
|
|
|
|
mmc1_clk: clk@01c2008c {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c2008c 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "mmc1";
|
|
};
|
|
|
|
mmc2_clk: clk@01c20090 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c20090 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "mmc2";
|
|
};
|
|
|
|
mmc3_clk: clk@01c20094 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c20094 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "mmc3";
|
|
};
|
|
|
|
ts_clk: clk@01c20098 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c20098 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "ts";
|
|
};
|
|
|
|
ss_clk: clk@01c2009c {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c2009c 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "ss";
|
|
};
|
|
|
|
spi0_clk: clk@01c200a0 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c200a0 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "spi0";
|
|
};
|
|
|
|
spi1_clk: clk@01c200a4 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c200a4 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "spi1";
|
|
};
|
|
|
|
spi2_clk: clk@01c200a8 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c200a8 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "spi2";
|
|
};
|
|
|
|
pata_clk: clk@01c200ac {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c200ac 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "pata";
|
|
};
|
|
|
|
ir0_clk: clk@01c200b0 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c200b0 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "ir0";
|
|
};
|
|
|
|
ir1_clk: clk@01c200b4 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c200b4 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "ir1";
|
|
};
|
|
|
|
usb_clk: clk@01c200cc {
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
compatible = "allwinner,sun4i-a10-usb-clk";
|
|
reg = <0x01c200cc 0x4>;
|
|
clocks = <&pll6 1>;
|
|
clock-output-names = "usb_ohci0", "usb_ohci1", "usb_phy";
|
|
};
|
|
|
|
spi3_clk: clk@01c200d4 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c200d4 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "spi3";
|
|
};
|
|
|
|
mbus_clk: clk@01c2015c {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c2015c 0x4>;
|
|
clocks = <&osc24M>, <&pll6 2>, <&pll5 1>;
|
|
clock-output-names = "mbus";
|
|
};
|
|
|
|
/*
|
|
* The following two are dummy clocks, placeholders used in the gmac_tx
|
|
* clock. The gmac driver will choose one parent depending on the PHY
|
|
* interface mode, using clk_set_rate auto-reparenting.
|
|
* The actual TX clock rate is not controlled by the gmac_tx clock.
|
|
*/
|
|
mii_phy_tx_clk: clk@2 {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <25000000>;
|
|
clock-output-names = "mii_phy_tx";
|
|
};
|
|
|
|
gmac_int_tx_clk: clk@3 {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <125000000>;
|
|
clock-output-names = "gmac_int_tx";
|
|
};
|
|
|
|
gmac_tx_clk: clk@01c20164 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun7i-a20-gmac-clk";
|
|
reg = <0x01c20164 0x4>;
|
|
clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
|
|
clock-output-names = "gmac_tx";
|
|
};
|
|
|
|
/*
|
|
* Dummy clock used by output clocks
|
|
*/
|
|
osc24M_32k: clk@1 {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-factor-clock";
|
|
clock-div = <750>;
|
|
clock-mult = <1>;
|
|
clocks = <&osc24M>;
|
|
clock-output-names = "osc24M_32k";
|
|
};
|
|
|
|
clk_out_a: clk@01c201f0 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun7i-a20-out-clk";
|
|
reg = <0x01c201f0 0x4>;
|
|
clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>;
|
|
clock-output-names = "clk_out_a";
|
|
};
|
|
|
|
clk_out_b: clk@01c201f4 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun7i-a20-out-clk";
|
|
reg = <0x01c201f4 0x4>;
|
|
clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>;
|
|
clock-output-names = "clk_out_b";
|
|
};
|
|
};
|
|
|
|
soc@01c00000 {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
spi0: spi@01c05000 {
|
|
compatible = "allwinner,sun4i-a10-spi";
|
|
reg = <0x01c05000 0x1000>;
|
|
interrupts = <0 10 4>;
|
|
clocks = <&ahb_gates 20>, <&spi0_clk>;
|
|
clock-names = "ahb", "mod";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
spi1: spi@01c06000 {
|
|
compatible = "allwinner,sun4i-a10-spi";
|
|
reg = <0x01c06000 0x1000>;
|
|
interrupts = <0 11 4>;
|
|
clocks = <&ahb_gates 21>, <&spi1_clk>;
|
|
clock-names = "ahb", "mod";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
emac: ethernet@01c0b000 {
|
|
compatible = "allwinner,sun4i-a10-emac";
|
|
reg = <0x01c0b000 0x1000>;
|
|
interrupts = <0 55 4>;
|
|
clocks = <&ahb_gates 17>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mdio@01c0b080 {
|
|
compatible = "allwinner,sun4i-a10-mdio";
|
|
reg = <0x01c0b080 0x14>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
spi2: spi@01c17000 {
|
|
compatible = "allwinner,sun4i-a10-spi";
|
|
reg = <0x01c17000 0x1000>;
|
|
interrupts = <0 12 4>;
|
|
clocks = <&ahb_gates 22>, <&spi2_clk>;
|
|
clock-names = "ahb", "mod";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
spi3: spi@01c1f000 {
|
|
compatible = "allwinner,sun4i-a10-spi";
|
|
reg = <0x01c1f000 0x1000>;
|
|
interrupts = <0 50 4>;
|
|
clocks = <&ahb_gates 23>, <&spi3_clk>;
|
|
clock-names = "ahb", "mod";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
pio: pinctrl@01c20800 {
|
|
compatible = "allwinner,sun7i-a20-pinctrl";
|
|
reg = <0x01c20800 0x400>;
|
|
interrupts = <0 28 4>;
|
|
clocks = <&apb0_gates 5>;
|
|
gpio-controller;
|
|
interrupt-controller;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
#gpio-cells = <3>;
|
|
|
|
uart0_pins_a: uart0@0 {
|
|
allwinner,pins = "PB22", "PB23";
|
|
allwinner,function = "uart0";
|
|
allwinner,drive = <0>;
|
|
allwinner,pull = <0>;
|
|
};
|
|
|
|
uart2_pins_a: uart2@0 {
|
|
allwinner,pins = "PI16", "PI17", "PI18", "PI19";
|
|
allwinner,function = "uart2";
|
|
allwinner,drive = <0>;
|
|
allwinner,pull = <0>;
|
|
};
|
|
|
|
uart6_pins_a: uart6@0 {
|
|
allwinner,pins = "PI12", "PI13";
|
|
allwinner,function = "uart6";
|
|
allwinner,drive = <0>;
|
|
allwinner,pull = <0>;
|
|
};
|
|
|
|
uart7_pins_a: uart7@0 {
|
|
allwinner,pins = "PI20", "PI21";
|
|
allwinner,function = "uart7";
|
|
allwinner,drive = <0>;
|
|
allwinner,pull = <0>;
|
|
};
|
|
|
|
i2c0_pins_a: i2c0@0 {
|
|
allwinner,pins = "PB0", "PB1";
|
|
allwinner,function = "i2c0";
|
|
allwinner,drive = <0>;
|
|
allwinner,pull = <0>;
|
|
};
|
|
|
|
i2c1_pins_a: i2c1@0 {
|
|
allwinner,pins = "PB18", "PB19";
|
|
allwinner,function = "i2c1";
|
|
allwinner,drive = <0>;
|
|
allwinner,pull = <0>;
|
|
};
|
|
|
|
i2c2_pins_a: i2c2@0 {
|
|
allwinner,pins = "PB20", "PB21";
|
|
allwinner,function = "i2c2";
|
|
allwinner,drive = <0>;
|
|
allwinner,pull = <0>;
|
|
};
|
|
|
|
emac_pins_a: emac0@0 {
|
|
allwinner,pins = "PA0", "PA1", "PA2",
|
|
"PA3", "PA4", "PA5", "PA6",
|
|
"PA7", "PA8", "PA9", "PA10",
|
|
"PA11", "PA12", "PA13", "PA14",
|
|
"PA15", "PA16";
|
|
allwinner,function = "emac";
|
|
allwinner,drive = <0>;
|
|
allwinner,pull = <0>;
|
|
};
|
|
|
|
clk_out_a_pins_a: clk_out_a@0 {
|
|
allwinner,pins = "PI12";
|
|
allwinner,function = "clk_out_a";
|
|
allwinner,drive = <0>;
|
|
allwinner,pull = <0>;
|
|
};
|
|
|
|
clk_out_b_pins_a: clk_out_b@0 {
|
|
allwinner,pins = "PI13";
|
|
allwinner,function = "clk_out_b";
|
|
allwinner,drive = <0>;
|
|
allwinner,pull = <0>;
|
|
};
|
|
|
|
gmac_pins_mii_a: gmac_mii@0 {
|
|
allwinner,pins = "PA0", "PA1", "PA2",
|
|
"PA3", "PA4", "PA5", "PA6",
|
|
"PA7", "PA8", "PA9", "PA10",
|
|
"PA11", "PA12", "PA13", "PA14",
|
|
"PA15", "PA16";
|
|
allwinner,function = "gmac";
|
|
allwinner,drive = <0>;
|
|
allwinner,pull = <0>;
|
|
};
|
|
|
|
gmac_pins_rgmii_a: gmac_rgmii@0 {
|
|
allwinner,pins = "PA0", "PA1", "PA2",
|
|
"PA3", "PA4", "PA5", "PA6",
|
|
"PA7", "PA8", "PA10",
|
|
"PA11", "PA12", "PA13",
|
|
"PA15", "PA16";
|
|
allwinner,function = "gmac";
|
|
/*
|
|
* data lines in RGMII mode use DDR mode
|
|
* and need a higher signal drive strength
|
|
*/
|
|
allwinner,drive = <3>;
|
|
allwinner,pull = <0>;
|
|
};
|
|
|
|
spi1_pins_a: spi1@0 {
|
|
allwinner,pins = "PI16", "PI17", "PI18", "PI19";
|
|
allwinner,function = "spi1";
|
|
allwinner,drive = <0>;
|
|
allwinner,pull = <0>;
|
|
};
|
|
|
|
spi2_pins_a: spi2@0 {
|
|
allwinner,pins = "PC19", "PC20", "PC21", "PC22";
|
|
allwinner,function = "spi2";
|
|
allwinner,drive = <0>;
|
|
allwinner,pull = <0>;
|
|
};
|
|
};
|
|
|
|
timer@01c20c00 {
|
|
compatible = "allwinner,sun4i-timer";
|
|
reg = <0x01c20c00 0x90>;
|
|
interrupts = <0 22 4>,
|
|
<0 23 4>,
|
|
<0 24 4>,
|
|
<0 25 4>,
|
|
<0 67 4>,
|
|
<0 68 4>;
|
|
clocks = <&osc24M>;
|
|
};
|
|
|
|
wdt: watchdog@01c20c90 {
|
|
compatible = "allwinner,sun4i-wdt";
|
|
reg = <0x01c20c90 0x10>;
|
|
};
|
|
|
|
rtc: rtc@01c20d00 {
|
|
compatible = "allwinner,sun7i-a20-rtc";
|
|
reg = <0x01c20d00 0x20>;
|
|
interrupts = <0 24 1>;
|
|
};
|
|
|
|
sid: eeprom@01c23800 {
|
|
compatible = "allwinner,sun7i-a20-sid";
|
|
reg = <0x01c23800 0x200>;
|
|
};
|
|
|
|
rtp: rtp@01c25000 {
|
|
compatible = "allwinner,sun4i-ts";
|
|
reg = <0x01c25000 0x100>;
|
|
interrupts = <0 29 4>;
|
|
};
|
|
|
|
uart0: serial@01c28000 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c28000 0x400>;
|
|
interrupts = <0 1 4>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&apb1_gates 16>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: serial@01c28400 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c28400 0x400>;
|
|
interrupts = <0 2 4>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&apb1_gates 17>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart2: serial@01c28800 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c28800 0x400>;
|
|
interrupts = <0 3 4>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&apb1_gates 18>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart3: serial@01c28c00 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c28c00 0x400>;
|
|
interrupts = <0 4 4>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&apb1_gates 19>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart4: serial@01c29000 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c29000 0x400>;
|
|
interrupts = <0 17 4>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&apb1_gates 20>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart5: serial@01c29400 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c29400 0x400>;
|
|
interrupts = <0 18 4>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&apb1_gates 21>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart6: serial@01c29800 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c29800 0x400>;
|
|
interrupts = <0 19 4>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&apb1_gates 22>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart7: serial@01c29c00 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c29c00 0x400>;
|
|
interrupts = <0 20 4>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&apb1_gates 23>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c0: i2c@01c2ac00 {
|
|
compatible = "allwinner,sun4i-i2c";
|
|
reg = <0x01c2ac00 0x400>;
|
|
interrupts = <0 7 4>;
|
|
clocks = <&apb1_gates 0>;
|
|
clock-frequency = <100000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c1: i2c@01c2b000 {
|
|
compatible = "allwinner,sun4i-i2c";
|
|
reg = <0x01c2b000 0x400>;
|
|
interrupts = <0 8 4>;
|
|
clocks = <&apb1_gates 1>;
|
|
clock-frequency = <100000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c2: i2c@01c2b400 {
|
|
compatible = "allwinner,sun4i-i2c";
|
|
reg = <0x01c2b400 0x400>;
|
|
interrupts = <0 9 4>;
|
|
clocks = <&apb1_gates 2>;
|
|
clock-frequency = <100000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c3: i2c@01c2b800 {
|
|
compatible = "allwinner,sun4i-i2c";
|
|
reg = <0x01c2b800 0x400>;
|
|
interrupts = <0 88 4>;
|
|
clocks = <&apb1_gates 3>;
|
|
clock-frequency = <100000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c4: i2c@01c2bc00 {
|
|
compatible = "allwinner,sun4i-i2c";
|
|
reg = <0x01c2bc00 0x400>;
|
|
interrupts = <0 89 4>;
|
|
clocks = <&apb1_gates 15>;
|
|
clock-frequency = <100000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
gmac: ethernet@01c50000 {
|
|
compatible = "allwinner,sun7i-a20-gmac";
|
|
reg = <0x01c50000 0x10000>;
|
|
interrupts = <0 85 4>;
|
|
interrupt-names = "macirq";
|
|
clocks = <&ahb_gates 49>, <&gmac_tx_clk>;
|
|
clock-names = "stmmaceth", "allwinner_gmac_tx";
|
|
snps,pbl = <2>;
|
|
snps,fixed-burst;
|
|
snps,force_sf_dma_mode;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
hstimer@01c60000 {
|
|
compatible = "allwinner,sun7i-a20-hstimer";
|
|
reg = <0x01c60000 0x1000>;
|
|
interrupts = <0 81 1>,
|
|
<0 82 1>,
|
|
<0 83 1>,
|
|
<0 84 1>;
|
|
clocks = <&ahb_gates 28>;
|
|
};
|
|
|
|
gic: interrupt-controller@01c81000 {
|
|
compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
|
|
reg = <0x01c81000 0x1000>,
|
|
<0x01c82000 0x1000>,
|
|
<0x01c84000 0x2000>,
|
|
<0x01c86000 0x2000>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
interrupts = <1 9 0xf04>;
|
|
};
|
|
};
|
|
};
|