korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-23 19:14:30 +08:00
Code Issues Packages Projects Releases Wiki Activity
1802d0beec
linux/arch/arm/boot/dts/rk3288-firefly.dtsi
Heiko Stuebner 07f08d9cee ARM: dts: rockchip: bulk convert gpios to their constant counterparts 
Rockchip SoCs use 2 different numbering schemes. Where the gpio-
controllers just count 0-31 for their 32 gpios, the underlying
iomux controller splits these into 4 separate entities A-D.

Device-schematics always use these iomux-values to identify pins,
so to make mapping schematics to devicetree easier Andy Yan introduced
named constants for the pins but so far we only used them on new
additions.

Using a sed-script created by Emil Renner Berthing bulk-convert
the remaining raw gpio numbers into their descriptive counterparts
and also gets rid of the unhelpful RK_FUNC_x -> x and RK_GPIOx -> x
mappings:

/rockchip,pins *=/bcheck
b # to end of script
:append-next-line
N
:check
/^[^;]*$/bappend-next-line
s/<RK_GPIO\([0-9]\) /<\1 /g
s/<\([^ ][^ ]*  *\)0 /<\1RK_PA0 /g
s/<\([^ ][^ ]*  *\)1 /<\1RK_PA1 /g
s/<\([^ ][^ ]*  *\)2 /<\1RK_PA2 /g
s/<\([^ ][^ ]*  *\)3 /<\1RK_PA3 /g
s/<\([^ ][^ ]*  *\)4 /<\1RK_PA4 /g
s/<\([^ ][^ ]*  *\)5 /<\1RK_PA5 /g
s/<\([^ ][^ ]*  *\)6 /<\1RK_PA6 /g
s/<\([^ ][^ ]*  *\)7 /<\1RK_PA7 /g
s/<\([^ ][^ ]*  *\)8 /<\1RK_PB0 /g
s/<\([^ ][^ ]*  *\)9 /<\1RK_PB1 /g
s/<\([^ ][^ ]*  *\)10 /<\1RK_PB2 /g
s/<\([^ ][^ ]*  *\)11 /<\1RK_PB3 /g
s/<\([^ ][^ ]*  *\)12 /<\1RK_PB4 /g
s/<\([^ ][^ ]*  *\)13 /<\1RK_PB5 /g
s/<\([^ ][^ ]*  *\)14 /<\1RK_PB6 /g
s/<\([^ ][^ ]*  *\)15 /<\1RK_PB7 /g
s/<\([^ ][^ ]*  *\)16 /<\1RK_PC0 /g
s/<\([^ ][^ ]*  *\)17 /<\1RK_PC1 /g
s/<\([^ ][^ ]*  *\)18 /<\1RK_PC2 /g
s/<\([^ ][^ ]*  *\)19 /<\1RK_PC3 /g
s/<\([^ ][^ ]*  *\)20 /<\1RK_PC4 /g
s/<\([^ ][^ ]*  *\)21 /<\1RK_PC5 /g
s/<\([^ ][^ ]*  *\)22 /<\1RK_PC6 /g
s/<\([^ ][^ ]*  *\)23 /<\1RK_PC7 /g
s/<\([^ ][^ ]*  *\)24 /<\1RK_PD0 /g
s/<\([^ ][^ ]*  *\)25 /<\1RK_PD1 /g
s/<\([^ ][^ ]*  *\)26 /<\1RK_PD2 /g
s/<\([^ ][^ ]*  *\)27 /<\1RK_PD3 /g
s/<\([^ ][^ ]*  *\)28 /<\1RK_PD4 /g
s/<\([^ ][^ ]*  *\)29 /<\1RK_PD5 /g
s/<\([^ ][^ ]*  *\)30 /<\1RK_PD6 /g
s/<\([^ ][^ ]*  *\)31 /<\1RK_PD7 /g
s/<\([^ ][^ ]*  *[^ ][^ ]*  *\)0 /<\1RK_FUNC_GPIO /g
s/<\([^ ][^ ]*  *[^ ][^ ]*  *\)RK_FUNC_\([1-9]\) /<\1\2 /g

Suggested-by: Emil Renner Berthing <esmil@mailme.dk>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-04-11 14:38:26 +02:00

575 lines
12 KiB
Plaintext
Raw Blame History

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd@gmail.com>
*/
#include <dt-bindings/input/input.h>
#include "rk3288.dtsi"
/ {
memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
};
adc-keys {
compatible = "adc-keys";
io-channels = <&saradc 1>;
io-channel-names = "buttons";
keyup-threshold-microvolt = <1800000>;
button-recovery {
label = "Recovery";
linux,code = <KEY_VENDOR>;
press-threshold-microvolt = <0>;
};
};
dovdd_1v8: dovdd-1v8-regulator {
compatible = "regulator-fixed";
regulator-name = "dovdd_1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&vcc28_dvp>;
};
ext_gmac: external-gmac-clock {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <125000000>;
clock-output-names = "ext_gmac";
};
ir: ir-receiver {
compatible = "gpio-ir-receiver";
pinctrl-names = "default";
pinctrl-0 = <&ir_int>;
};
keys: gpio-keys {
compatible = "gpio-keys";
power {
wakeup-source;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
linux,code = <KEY_POWER>;
pinctrl-names = "default";
pinctrl-0 = <&pwr_key>;
};
};
leds {
compatible = "gpio-leds";
work {
gpios = <&gpio8 RK_PA1 GPIO_ACTIVE_LOW>;
label = "firefly:blue:user";
linux,default-trigger = "rc-feedback";
pinctrl-names = "default";
pinctrl-0 = <&work_led>;
};
power {
gpios = <&gpio8 RK_PA2 GPIO_ACTIVE_LOW>;
label = "firefly:green:power";
linux,default-trigger = "default-on";
pinctrl-names = "default";
pinctrl-0 = <&power_led>;
};
};
vbat_wl: vcc_sys: vsys-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc_sys";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
};
vcc_sd: sdmmc-regulator {
compatible = "regulator-fixed";
gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_pwr>;
regulator-name = "vcc_sd";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
startup-delay-us = <100000>;
vin-supply = <&vcc_io>;
};
vcc_flash: flash-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc_flash";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&vcc_io>;
};
vcc_5v: usb-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc_5v";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
vin-supply = <&vcc_sys>;
};
vcc_host_5v: usb-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>;
regulator-name = "vcc_host_5v";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
vin-supply = <&vcc_5v>;
};
vcc_otg_5v: usb-otg-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&otg_vbus_drv>;
regulator-name = "vcc_otg_5v";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
vin-supply = <&vcc_5v>;
};
/*
* A TT8142 creates both dovdd_1v8 and vcc28_dvp, controlled
* by the dvp_pwr pin.
*/
vcc28_dvp: vcc28-dvp-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&dvp_pwr>;
regulator-name = "vcc28_dvp";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
vin-supply = <&vcc_io>;
};
};
&cpu0 {
cpu0-supply = <&vdd_cpu>;
};
&emmc {
bus-width = <8>;
cap-mmc-highspeed;
disable-wp;
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>;
vmmc-supply = <&vcc_io>;
vqmmc-supply = <&vcc_flash>;
status = "okay";
};
&gmac {
assigned-clocks = <&cru SCLK_MAC>;
assigned-clock-parents = <&ext_gmac>;
clock_in_out = "input";
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
phy-supply = <&vcc_lan>;
phy-mode = "rgmii";
snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>;
snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
tx_delay = <0x30>;
rx_delay = <0x10>;
status = "ok";
};
&gpu {
mali-supply = <&vdd_gpu>;
status = "okay";
};
&hdmi {
ddc-i2c-bus = <&i2c5>;
status = "okay";
};
&i2c0 {
clock-frequency = <400000>;
status = "okay";
vdd_cpu: syr827@40 {
compatible = "silergy,syr827";
fcs,suspend-voltage-selector = <1>;
reg = <0x40>;
regulator-name = "vdd_cpu";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
regulator-enable-ramp-delay = <300>;
regulator-ramp-delay = <8000>;
vin-supply = <&vcc_sys>;
};
vdd_gpu: syr828@41 {
compatible = "silergy,syr828";
fcs,suspend-voltage-selector = <1>;
reg = <0x41>;
regulator-name = "vdd_gpu";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
vin-supply = <&vcc_sys>;
};
hym8563: hym8563@51 {
compatible = "haoyu,hym8563";
reg = <0x51>;
#clock-cells = <0>;
clock-frequency = <32768>;
clock-output-names = "xin32k";
interrupt-parent = <&gpio7>;
interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
pinctrl-0 = <&rtc_int>;
};
act8846: act8846@5a {
compatible = "active-semi,act8846";
reg = <0x5a>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_vsel>, <&pwr_hold>;
system-power-controller;
vp1-supply = <&vcc_sys>;
vp2-supply = <&vcc_sys>;
vp3-supply = <&vcc_sys>;
vp4-supply = <&vcc_sys>;
inl1-supply = <&vcc_sys>;
inl2-supply = <&vcc_sys>;
inl3-supply = <&vcc_20>;
regulators {
vcc_ddr: REG1 {
regulator-name = "vcc_ddr";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
vcc_io: REG2 {
regulator-name = "vcc_io";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vdd_log: REG3 {
regulator-name = "vdd_log";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
};
vcc_20: REG4 {
regulator-name = "vcc_20";
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
regulator-always-on;
};
vccio_sd: REG5 {
regulator-name = "vccio_sd";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vdd10_lcd: REG6 {
regulator-name = "vdd10_lcd";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
vcca_18: REG7 {
regulator-name = "vcca_18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vcca_33: REG8 {
regulator-name = "vcca_33";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
vcc_lan: REG9 {
regulator-name = "vcc_lan";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
vdd_10: REG10 {
regulator-name = "vdd_10";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
vccio_wl: vcc_18: REG11 {
regulator-name = "vcc_18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
vcc18_lcd: REG12 {
regulator-name = "vcc18_lcd";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
};
};
};
&i2c1 {
status = "okay";
};
&i2c2 {
status = "okay";
};
&i2c4 {
status = "okay";
};
&i2c5 {
status = "okay";
};
&io_domains {
status = "okay";
audio-supply = <&vcca_33>;
bb-supply = <&vcc_io>;
dvp-supply = <&dovdd_1v8>;
flash0-supply = <&vcc_flash>;
flash1-supply = <&vcc_lan>;
gpio30-supply = <&vcc_io>;
gpio1830-supply = <&vcc_io>;
lcdc-supply = <&vcc_io>;
sdcard-supply = <&vccio_sd>;
wifi-supply = <&vccio_wl>;
};
&pinctrl {
pcfg_output_high: pcfg-output-high {
output-high;
};
pcfg_output_low: pcfg-output-low {
output-low;
};
pcfg_pull_up_drv_12ma: pcfg-pull-up-drv-12ma {
bias-pull-up;
drive-strength = <12>;
};
act8846 {
pwr_hold: pwr-hold {
rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_output_high>;
};
};
dvp {
dvp_pwr: dvp-pwr {
rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
gmac {
phy_int: phy-int {
rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
};
phy_pmeb: phy-pmeb {
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
};
phy_rst: phy-rst {
rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>;
};
};
hym8563 {
rtc_int: rtc-int {
rockchip,pins = <7 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
keys {
pwr_key: pwr-key {
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
leds {
power_led: power-led {
rockchip,pins = <8 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
work_led: work-led {
rockchip,pins = <8 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
sdmmc {
/*
* Default drive strength isn't enough to achieve even
* high-speed mode on firefly board so bump up to 12ma.
*/
sdmmc_bus4: sdmmc-bus4 {
rockchip,pins = <6 RK_PC0 1 &pcfg_pull_up_drv_12ma>,
<6 RK_PC1 1 &pcfg_pull_up_drv_12ma>,
<6 RK_PC2 1 &pcfg_pull_up_drv_12ma>,
<6 RK_PC3 1 &pcfg_pull_up_drv_12ma>;
};
sdmmc_clk: sdmmc-clk {
rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_12ma>;
};
sdmmc_cmd: sdmmc-cmd {
rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up_drv_12ma>;
};
sdmmc_pwr: sdmmc-pwr {
rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
usb_host {
host_vbus_drv: host-vbus-drv {
rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
};
usbhub_rst: usbhub-rst {
rockchip,pins = <8 RK_PA3 RK_FUNC_GPIO &pcfg_output_high>;
};
};
usb_otg {
otg_vbus_drv: otg-vbus-drv {
rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
&saradc {
vref-supply = <&vcc_18>;
status = "okay";
};
&sdio0 {
bus-width = <4>;
disable-wp;
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>;
vmmc-supply = <&vbat_wl>;
vqmmc-supply = <&vccio_wl>;
status = "okay";
};
&sdmmc {
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
card-detect-delay = <200>;
disable-wp;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
vmmc-supply = <&vcc_sd>;
vqmmc-supply = <&vccio_sd>;
status = "okay";
};
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi0_clk>, <&spi0_cs0>, <&spi0_tx>, <&spi0_rx>, <&spi0_cs1>;
status = "okay";
};
&tsadc {
rockchip,hw-tshut-mode = <0>;
rockchip,hw-tshut-polarity = <0>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>;
status = "okay";
};
&uart1 {
status = "okay";
};
&uart2 {
status = "okay";
};
&uart3 {
status = "okay";
};
&usbphy {
status = "okay";
};
&usb_host1 {
pinctrl-names = "default";
pinctrl-0 = <&usbhub_rst>;
status = "okay";
};
&usb_otg {
status = "okay";
};
&vopb {
status = "okay";
};
&vopb_mmu {
status = "okay";
};
&vopl {
status = "okay";
};
&vopl_mmu {
status = "okay";
};
&wdt {
status = "okay";
};
Reference in New Issue View Git Blame Copy Permalink