linux/arch/arm/boot/dts/omap2420-n810.dts
Andrew F. Davis b453c41760 ARM: dts: omap2420-n810: Use new CODEC reset pin name
The correct DT property for specifying a GPIO used for reset
is "reset-gpios", the driver now accepts this name, use it here.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-09 08:09:42 -07:00

76 lines
1.8 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include "omap2420-n8x0-common.dtsi"
/ {
model = "Nokia N810";
compatible = "nokia,n810", "nokia,n8x0", "ti,omap2420", "ti,omap2";
vio_ape: vio_ape {
compatible = "regulator-fixed";
regulator-name = "vio_ape";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
v28_aic: v28_aic {
compatible = "regulator-fixed";
regulator-name = "v28_aic";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
};
&omap2420_pmx {
mcbsp2_pins: mcbsp2_pins {
pinctrl-single,pins = <
OMAP2420_CORE_IOPAD(0x0124, PIN_INPUT | MUX_MODE1) /* eac_ac_sclk.mcbsp2_clkx */
OMAP2420_CORE_IOPAD(0x0125, PIN_INPUT | MUX_MODE1) /* eac_ac_fs.mcbsp2_fsx */
OMAP2420_CORE_IOPAD(0x0126, PIN_INPUT | MUX_MODE1) /* eac_ac_din.mcbsp2_dr */
OMAP2420_CORE_IOPAD(0x0127, PIN_OUTPUT | MUX_MODE1) /* eac_ac_dout.mcbsp2_dx */
>;
};
aic33_pins: aic33_pins {
pinctrl-single,pins = <
OMAP2420_CORE_IOPAD(0x0129, PIN_OUTPUT | MUX_MODE3) /* eac_ac_rst.gpio118 */
OMAP2420_CORE_IOPAD(0x00e8, PIN_OUTPUT | MUX_MODE2) /* vlynq_tx1.sys_clkout2 */
>;
};
};
&i2c2 {
aic33@18 {
compatible = "ti,tlv320aic33";
reg = <0x18>;
pinctrl-names = "default";
pinctrl-0 = <&aic33_pins>;
reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; /* gpio118 */
ai3x-gpio-func = <
10 /* AIC3X_GPIO1_FUNC_DIGITAL_MIC_MODCLK */
5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
>;
ai3x-micbias-vg = <1>; /* 2V */
AVDD-supply = <&v28_aic>;
DRVDD-supply = <&v28_aic>;
IOVDD-supply = <&vio_ape>;
DVDD-supply = <&vio_ape>;
assigned-clocks = <&sys_clkout2_src>, <&sys_clkout2>;
assigned-clock-parents = <&func_96m_ck>;
assigned-clock-rates = <0>, <12000000>;
};
};
&mcbsp2 {
pinctrl-names = "default";
pinctrl-0 = <&mcbsp2_pins>;
status = "okay";
};