linux/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
Linus Torvalds 6ad63dec9c ARM: SoC device tree updates for 5.1
This is a smaller update than the past few times, but with just over
 500 non-merge changesets still dwarfes the rest of the SoC tree.
 
 Three new SoC platforms get added, each one a follow-up to an existing
 product, and added here in combination with a reference platform:
 
  - Renesas RZ/A2M (R7S9210) 32-bit Cortex-A9 Real-time imaging processor
    https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rza/rza2m.html
 
  - Renesas RZ/G2E (r8a774c0) 64-bit Cortex-A53 SoC "for
    Rich Graphics Applications".
    https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rzg/rzg2e.html
 
  - NXP i.MX8QuadXPlus 64-bit Cortex-A35 SoC
    https://www.nxp.com/products/processors-and-microcontrollers/arm-based-processors-and-mcus/i.mx-applications-processors/i.mx-8-processors/i.mx-8x-family-arm-cortex-a35-3d-graphics-4k-video-dsp-error-correcting-code-on-ddr:i.MX8X
 
 These are actual commercial products we now support with an in-kernel
 device tree source file:
 
  - Bosch Guardian is a product made by Bosch Power
    Tools GmbH, based on the Texas Instruments AM335x chip
 
  - Winterland IceBoard is a Texas Instruments AM3874 based
    machine used in telescopes at the south pole and elsewhere, see commit
    d031773169 for some pointers:
 
  - Inspur on5263m5 is an x86 server platform with an Aspeed
    ast2500 baseboard management controller. This is for running on
    the BMC.
 
  - Zodiac Digital Tapping Unit, apparently a kind of ethernet
    switch used in airplanes.
 
  - Phicomm K3 is a WiFi router based on Broadcom bcm47094
 
  - Methode Electronics uDPU FTTdp distribution point unit
 
  - X96 Max, a generic TV box based on Amlogic G12a (S905X2)
 
  - NVIDIA Shield TV (Darcy) based on Tegra210
 
 And then there are several new SBC, evaluation, development or modular
 systems that we add:
 
  - Three new Rockchips rk3399 based boards:
     - FriendlyElec NanoPC-T4 and NanoPi M4
     - Radxa ROCK Pi 4
 
  - Five new i.MX6 family SoM modules and boards for industrial
    products:
     - Logic PD i.MX6QD SoM and evaluation baseboad
     - Y Soft IOTA Draco/Hydra/Ursa family boards based on i.MX6DL
     - Phytec phyCORE i.MX6 UltraLite SoM and evaluation module
 
  - MYIR Tech MYD-LPC4357 development based on the NXP lpc4357
    microcontroller
 
  - Chameleon96, an Intel/Altera Cyclone5 based FPGA development
    system in 96boards form factor
 
  - Arm Fixed Virtual Platforms(FVP) Base RevC, a purely
    virtual platform for corresponding to the latest "fast model"
 
  - Another Raspberry Pi variant: Model 3 A+, supported both
    in 32-bit and 64-bit mode.
 
  - Oxalis Evalkit V100 based on NXP Layerscape LS1012a,
    in 96Boards enterprise form factor
 
  - Elgin RV1108 R1 development board based on 32-bit Rockchips RV1108
 
 For already supported boards and SoCs, we often add support for new
 devices after merging the drivers. This time, the largest changes include
 updates for
 
  - STMicroelectronics stm32mp1, which was now formally
    launched last week
 
  - Qualcomm Snapdragon 845, a high-end phone and low-end laptop chip
 
  - Action Semi S700
 
  - TI AM654x, their recently merged 64-bit SoC from the OMAP family
 
  - Various Amlogic Meson SoCs
 
  - Mediatek MT2712
 
  - NVIDIA Tegra186 and Tegra210
 
  - The ancient NXP lpc32xx family
 
  - Samsung s5pv210, used in some older mobile phones
 
 Many other chips see smaller updates and bugfixes beyond that.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJcf9c1AAoJEGCrR//JCVInvl8QAIgmK09QZr3VAD5WnKSoWwiX
 GP1+qgmr/cbIF9X+Kt/0Y2E+oIi9uxu7v5iwpYf0inzV4QOKwy9LvpeInd7s07bf
 hSPMN0wZ9bV5Ylk0YtlvGvOQTqys9oweeSEkHfjQ8Jm7aFkaRXQ1dt23d8KLILoB
 8GKk9A4ncn1AB1vu6xBqeqBiaQiqhMjb9paWkmjYrjhP22hHlVyGlMd8cwfG+A5a
 5Ft4lWkzvgrXPMwZgrCGU233OV5UHrn2A8ohiIUN5J6aSWxu8eMEryU+MF0poidl
 malJ+AHl2mK83YN3wYemxy/lEJzAW4PrjCVgY2bRDqwlOnI3+d+z7rVSfuMCzSKs
 TDTbv9VqPJhsZFr/GIkvB3iwnYfvP/mXrzM7gbw7rQqthEKOy+3HtZwmHAKF4QNK
 TT4wyngC/CwiyULEwtPCjbxZ/7yal6sygllioCo+M2OHeattIQEnqi/Yvc0vx/th
 th9Pepf26jUp/ZJNlxk0XDyBMPhUf6sHUvh7a+y6l6ZxZ6avbFdGPeJrQe5HF2Sp
 KM7BH3w/CpoNRSKs37mR7JpNdYNDSonItgaIm5xVJZk+Wr/BWgtcr6BbGD/vlT7N
 kIDDinyhczhvhpTmWs6QZdZNQmf6bASzTVeFv2+ES+kXt/AKhv0O5N4Pw/oU+VBv
 pD5+7YjjA0fMKcYae3gs
 =1goV
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC device tree updates from Arnd Bergmann:
 "This is a smaller update than the past few times, but with just over
  500 non-merge changesets still dwarfes the rest of the SoC tree.

  Three new SoC platforms get added, each one a follow-up to an existing
  product, and added here in combination with a reference platform:

   - Renesas RZ/A2M (R7S9210) 32-bit Cortex-A9 Real-time imaging
     processor:

       https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rza/rza2m.html

   - Renesas RZ/G2E (r8a774c0) 64-bit Cortex-A53 SoC "for Rich Graphics
     Applications":

       https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rzg/rzg2e.html

   - NXP i.MX8QuadXPlus 64-bit Cortex-A35 SoC:

       https://www.nxp.com/products/processors-and-microcontrollers/arm-based-processors-and-mcus/i.mx-applications-processors/i.mx-8-processors/i.mx-8x-family-arm-cortex-a35-3d-graphics-4k-video-dsp-error-correcting-code-on-ddr:i.MX8X

  These are actual commercial products we now support with an in-kernel
  device tree source file:

   - Bosch Guardian is a product made by Bosch Power Tools GmbH, based
     on the Texas Instruments AM335x chip

   - Winterland IceBoard is a Texas Instruments AM3874 based machine
     used in telescopes at the south pole and elsewhere, see commit
     d031773169 for some pointers:

   - Inspur on5263m5 is an x86 server platform with an Aspeed ast2500
     baseboard management controller. This is for running on the BMC.

   - Zodiac Digital Tapping Unit, apparently a kind of ethernet switch
     used in airplanes.

   - Phicomm K3 is a WiFi router based on Broadcom bcm47094

   - Methode Electronics uDPU FTTdp distribution point unit

   - X96 Max, a generic TV box based on Amlogic G12a (S905X2)

   - NVIDIA Shield TV (Darcy) based on Tegra210

  And then there are several new SBC, evaluation, development or modular
  systems that we add:

   - Three new Rockchips rk3399 based boards:
       - FriendlyElec NanoPC-T4 and NanoPi M4
       - Radxa ROCK Pi 4

   - Five new i.MX6 family SoM modules and boards for industrial
     products:
       - Logic PD i.MX6QD SoM and evaluation baseboad
       - Y Soft IOTA Draco/Hydra/Ursa family boards based on i.MX6DL
       - Phytec phyCORE i.MX6 UltraLite SoM and evaluation module

   - MYIR Tech MYD-LPC4357 development based on the NXP lpc4357
     microcontroller

   - Chameleon96, an Intel/Altera Cyclone5 based FPGA development system
     in 96boards form factor

   - Arm Fixed Virtual Platforms(FVP) Base RevC, a purely virtual
     platform for corresponding to the latest "fast model"

   - Another Raspberry Pi variant: Model 3 A+, supported both in 32-bit
     and 64-bit mode.

   - Oxalis Evalkit V100 based on NXP Layerscape LS1012a, in 96Boards
     enterprise form factor

   - Elgin RV1108 R1 development board based on 32-bit Rockchips RV1108

  For already supported boards and SoCs, we often add support for new
  devices after merging the drivers. This time, the largest changes
  include updates for

   - STMicroelectronics stm32mp1, which was now formally launched last
     week

   - Qualcomm Snapdragon 845, a high-end phone and low-end laptop chip

   - Action Semi S700

   - TI AM654x, their recently merged 64-bit SoC from the OMAP family

   - Various Amlogic Meson SoCs

   - Mediatek MT2712

   - NVIDIA Tegra186 and Tegra210

   - The ancient NXP lpc32xx family

   - Samsung s5pv210, used in some older mobile phones

  Many other chips see smaller updates and bugfixes beyond that"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (506 commits)
  ARM: dts: exynos: Fix max voltage for buck8 regulator on Odroid XU3/XU4
  dt-bindings: net: ti: deprecate cpsw-phy-sel bindings
  ARM: dts: am335x: switch to use phy-gmii-sel
  ARM: dts: am4372: switch to use phy-gmii-sel
  ARM: dts: dm814x: switch to use phy-gmii-sel
  ARM: dts: dra7: switch to use phy-gmii-sel
  arch: arm: dts: kirkwood-rd88f6281: Remove disabled marvell,dsa reference
  ARM: dts: exynos: Add support for secondary DAI to Odroid XU4
  ARM: dts: exynos: Add support for secondary DAI to Odroid XU3
  ARM: dts: exynos: Disable ARM PMU on Odroid XU3-lite
  ARM: dts: exynos: Add stdout path property to Arndale board
  ARM: dts: exynos: Add minimal clkout parameters to Exynos3250 PMU
  ARM: dts: exynos: Enable ADC on Odroid HC1
  arm64: dts: sprd: Remove wildcard compatible string
  arm64: dts: sprd: Add SC27XX fuel gauge device
  arm64: dts: sprd: Add SC2731 charger device
  arm64: dts: sprd: Add ADC calibration support
  arm64: dts: sprd: Remove PMIC INTC irq trigger type
  arm64: dts: rockchip: Enable tsadc device on rock960
  ARM: dts: rockchip: add chosen node on veyron devices
  ...
2019-03-06 09:36:37 -08:00

250 lines
4.5 KiB
Plaintext

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2018 Oleg Ivanov <balbes-150@yandex.ru>
* Copyright (c) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
*/
/dts-v1/;
#include "meson8m2.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "Tronsmart MXIII Plus";
compatible = "tronsmart,mxiii-plus", "amlogic,meson8m2";
aliases {
ethernet0 = &ethmac;
i2c0 = &i2c_AO;
serial0 = &uart_AO;
serial1 = &uart_A;
mmc0 = &sd_card_slot;
};
chosen {
stdout-path = "serial0:115200n8";
};
memory {
device_type = "memory";
reg = <0x40000000 0x80000000>;
};
adc-keys {
compatible = "adc-keys";
io-channels = <&saradc 0>;
io-channel-names = "buttons";
keyup-threshold-microvolt = <1710000>;
button-function {
label = "Function";
linux,code = <KEY_FN>;
press-threshold-microvolt = <10000>;
};
};
iio-hwmon {
compatible = "iio-hwmon";
io-channels = <&saradc 8>;
};
vcc_3v3: regulator-vcc3v3 {
compatible = "regulator-fixed";
regulator-name = "VCC3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
};
&cpu0 {
cpu-supply = <&vcck>;
};
&ethmac {
status = "okay";
pinctrl-0 = <&eth_rgmii_pins>;
pinctrl-names = "default";
phy-handle = <&eth_phy0>;
phy-mode = "rgmii";
amlogic,tx-delay-ns = <4>;
snps,reset-gpio = <&gpio GPIOH_4 0>;
snps,reset-delays-us = <0 10000 1000000>;
snps,reset-active-low;
mdio {
compatible = "snps,dwmac-mdio";
#address-cells = <1>;
#size-cells = <0>;
eth_phy0: ethernet-phy@0 {
/* Realtek RTL8211F (0x001cc916) */
reg = <0>;
};
};
};
&ir_receiver {
status = "okay";
pinctrl-0 = <&ir_recv_pins>;
pinctrl-names = "default";
};
&i2c_AO {
status = "okay";
pinctrl-0 = <&i2c_ao_pins>;
pinctrl-names = "default";
pmic@32 {
compatible = "ricoh,rn5t618";
reg = <0x32>;
system-power-controller;
regulators {
vcck: DCDC1 {
regulator-name = "VCCK";
regulator-min-microvolt = <825000>;
regulator-max-microvolt = <1150000>;
regulator-boot-on;
regulator-always-on;
};
DCDC2 {
regulator-name = "VDDAO";
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <1150000>;
regulator-boot-on;
regulator-always-on;
};
DCDC3 {
regulator-name = "VDD_DDR";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
};
LDO1 {
regulator-name = "VDDIO_AO28";
regulator-min-microvolt = <2900000>;
regulator-max-microvolt = <2900000>;
regulator-boot-on;
regulator-always-on;
};
vddio_ao1v8: LDO2 {
regulator-name = "VDDIO_AO18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
LDO3 {
regulator-name = "VCC1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
LDO4 {
regulator-name = "VCC2V8";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
regulator-boot-on;
regulator-always-on;
};
LDO5 {
regulator-name = "AVDD1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
LDORTC1 {
regulator-name = "VDD_LDO";
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <2700000>;
regulator-boot-on;
regulator-always-on;
};
LDORTC2 {
regulator-name = "RTC_0V9";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-boot-on;
regulator-always-on;
};
};
};
};
&saradc {
status = "okay";
vref-supply = <&vddio_ao1v8>;
};
&sdio {
status = "okay";
pinctrl-0 = <&sd_b_pins>;
pinctrl-names = "default";
/* SD card */
sd_card_slot: slot@1 {
compatible = "mmc-slot";
reg = <1>;
status = "okay";
bus-width = <4>;
no-sdio;
cap-mmc-highspeed;
cap-sd-highspeed;
disable-wp;
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
vmmc-supply = <&vcc_3v3>;
};
};
/* connected to the Bluetooth module */
&uart_A {
status = "okay";
pinctrl-0 = <&uart_a1_pins>, <&uart_a1_cts_rts_pins>;
pinctrl-names = "default";
uart-has-rtscts;
};
&uart_AO {
status = "okay";
pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
};
&usb0 {
status = "okay";
};
&usb1 {
status = "okay";
};
&usb0_phy {
status = "okay";
};
&usb1_phy {
status = "okay";
};