mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-23 19:14:30 +08:00
7ee137a96a
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
894 lines
18 KiB
Plaintext
894 lines
18 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
|
/*
|
|
* Copyright (C) 2017 Zodiac Inflight Innovations
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "imx51.dtsi"
|
|
#include <dt-bindings/sound/fsl-imx-audmux.h>
|
|
|
|
/ {
|
|
model = "ZII RDU1 Board";
|
|
compatible = "zii,imx51-rdu1", "fsl,imx51";
|
|
|
|
chosen {
|
|
stdout-path = &uart1;
|
|
};
|
|
|
|
/* Will be filled by the bootloader */
|
|
memory@90000000 {
|
|
device_type = "memory";
|
|
reg = <0x90000000 0>;
|
|
};
|
|
|
|
aliases {
|
|
mdio-gpio0 = &mdio_gpio;
|
|
rtc0 = &ds1341;
|
|
};
|
|
|
|
clk_26M_osc: 26M_osc {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <26000000>;
|
|
};
|
|
|
|
clk_26M_osc_gate: 26M_gate {
|
|
compatible = "gpio-gate-clock";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_clk26mhz>;
|
|
clocks = <&clk_26M_osc>;
|
|
#clock-cells = <0>;
|
|
enable-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
clk_26M_usb: usbhost_gate {
|
|
compatible = "gpio-gate-clock";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usbgate26mhz>;
|
|
clocks = <&clk_26M_osc_gate>;
|
|
#clock-cells = <0>;
|
|
enable-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
clk_26M_snd: snd_gate {
|
|
compatible = "gpio-gate-clock";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_sndgate26mhz>;
|
|
clocks = <&clk_26M_osc_gate>;
|
|
#clock-cells = <0>;
|
|
enable-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
reg_5p0v_main: regulator-5p0v-main {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "5V_MAIN";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_3p3v: regulator-3p3v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "3.3V";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
disp0 {
|
|
compatible = "fsl,imx-parallel-display";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_ipu_disp1>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
display_in: endpoint {
|
|
remote-endpoint = <&ipu_di0_disp1>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
|
|
display_out: endpoint {
|
|
remote-endpoint = <&panel_in>;
|
|
};
|
|
};
|
|
};
|
|
|
|
panel {
|
|
/* no compatible here, bootloader will patch in correct one */
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_panel>;
|
|
power-supply = <®_3p3v>;
|
|
enable-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
|
|
status = "disabled";
|
|
|
|
port {
|
|
panel_in: endpoint {
|
|
remote-endpoint = <&display_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
i2c_gpio: i2c-gpio {
|
|
compatible = "i2c-gpio";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_swi2c>;
|
|
gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>, /* sda */
|
|
<&gpio3 4 GPIO_ACTIVE_HIGH>; /* scl */
|
|
i2c-gpio,delay-us = <50>;
|
|
status = "okay";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
sgtl5000: codec@a {
|
|
compatible = "fsl,sgtl5000";
|
|
reg = <0x0a>;
|
|
clocks = <&clk_26M_snd>;
|
|
VDDA-supply = <&vdig_reg>;
|
|
VDDIO-supply = <&vvideo_reg>;
|
|
#sound-dai-cells = <0>;
|
|
};
|
|
};
|
|
|
|
spi_gpio: spi-gpio {
|
|
compatible = "spi-gpio";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_gpiospi0>;
|
|
status = "okay";
|
|
|
|
gpio-sck = <&gpio4 15 GPIO_ACTIVE_HIGH>;
|
|
gpio-mosi = <&gpio4 12 GPIO_ACTIVE_HIGH>;
|
|
gpio-miso = <&gpio4 11 GPIO_ACTIVE_HIGH>;
|
|
num-chipselects = <1>;
|
|
cs-gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>;
|
|
|
|
eeprom@0 {
|
|
compatible = "eeprom-93xx46";
|
|
reg = <0>;
|
|
spi-max-frequency = <1000000>;
|
|
spi-cs-high;
|
|
data-size = <8>;
|
|
};
|
|
};
|
|
|
|
mdio_gpio: mdio-gpio {
|
|
compatible = "virtual,mdio-gpio";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_swmdio>;
|
|
gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>, /* mdc */
|
|
<&gpio3 25 GPIO_ACTIVE_HIGH>; /* mdio */
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
switch@0 {
|
|
compatible = "marvell,mv88e6085";
|
|
reg = <0>;
|
|
dsa,member = <0 0>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
label = "cpu";
|
|
ethernet = <&fec>;
|
|
|
|
fixed-link {
|
|
speed = <100>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
label = "netaux";
|
|
};
|
|
|
|
port@3 {
|
|
reg = <3>;
|
|
label = "netright";
|
|
};
|
|
|
|
port@4 {
|
|
reg = <4>;
|
|
label = "netleft";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
sound {
|
|
compatible = "simple-audio-card";
|
|
simple-audio-card,name = "Front";
|
|
simple-audio-card,format = "i2s";
|
|
simple-audio-card,bitclock-master = <&sound_codec>;
|
|
simple-audio-card,frame-master = <&sound_codec>;
|
|
simple-audio-card,widgets =
|
|
"Headphone", "Headphone Jack";
|
|
simple-audio-card,routing =
|
|
"Headphone Jack", "HPLEFT",
|
|
"Headphone Jack", "HPRIGHT";
|
|
simple-audio-card,aux-devs = <&hpa1>;
|
|
|
|
sound_cpu: simple-audio-card,cpu {
|
|
sound-dai = <&ssi2>;
|
|
};
|
|
|
|
sound_codec: simple-audio-card,codec {
|
|
sound-dai = <&sgtl5000>;
|
|
clocks = <&clk_26M_snd>;
|
|
};
|
|
};
|
|
|
|
usbh1phy: usbphy1 {
|
|
compatible = "usb-nop-xceiv";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usbh1phy>;
|
|
clocks = <&clk_26M_usb>;
|
|
clock-names = "main_clk";
|
|
reset-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
|
|
vcc-supply = <&vusb_reg>;
|
|
#phy-cells = <0>;
|
|
};
|
|
|
|
usbh2phy: usbphy2 {
|
|
compatible = "usb-nop-xceiv";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usbh2phy>;
|
|
clocks = <&clk_26M_usb>;
|
|
clock-names = "main_clk";
|
|
reset-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
|
|
vcc-supply = <&vusb_reg>;
|
|
#phy-cells = <0>;
|
|
};
|
|
};
|
|
|
|
&audmux {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_audmux>;
|
|
status = "okay";
|
|
|
|
ssi2 {
|
|
fsl,audmux-port = <1>;
|
|
fsl,port-config = <
|
|
(IMX_AUDMUX_V2_PTCR_SYN |
|
|
IMX_AUDMUX_V2_PTCR_TFSEL(2) |
|
|
IMX_AUDMUX_V2_PTCR_TCSEL(2) |
|
|
IMX_AUDMUX_V2_PTCR_TFSDIR |
|
|
IMX_AUDMUX_V2_PTCR_TCLKDIR)
|
|
IMX_AUDMUX_V2_PDCR_RXDSEL(2)
|
|
>;
|
|
};
|
|
|
|
aud3 {
|
|
fsl,audmux-port = <2>;
|
|
fsl,port-config = <
|
|
IMX_AUDMUX_V2_PTCR_SYN
|
|
IMX_AUDMUX_V2_PDCR_RXDSEL(1)
|
|
>;
|
|
};
|
|
};
|
|
|
|
&cpu {
|
|
cpu-supply = <&sw1_reg>;
|
|
};
|
|
|
|
&ecspi1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_ecspi1>;
|
|
cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
|
|
<&gpio4 25 GPIO_ACTIVE_LOW>;
|
|
status = "okay";
|
|
|
|
pmic@0 {
|
|
compatible = "fsl,mc13892";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pmic>;
|
|
spi-max-frequency = <6000000>;
|
|
spi-cs-high;
|
|
reg = <0>;
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
|
|
fsl,mc13xxx-uses-adc;
|
|
|
|
regulators {
|
|
sw1_reg: sw1 {
|
|
regulator-min-microvolt = <600000>;
|
|
regulator-max-microvolt = <1375000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
sw2_reg: sw2 {
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <1850000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
sw3_reg: sw3 {
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1850000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
sw4_reg: sw4 {
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1850000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vpll_reg: vpll {
|
|
regulator-min-microvolt = <1050000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vdig_reg: vdig {
|
|
regulator-min-microvolt = <1650000>;
|
|
regulator-max-microvolt = <1650000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vsd_reg: vsd {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3150000>;
|
|
};
|
|
|
|
vusb_reg: vusb {
|
|
regulator-always-on;
|
|
};
|
|
|
|
vusb2_reg: vusb2 {
|
|
regulator-min-microvolt = <2400000>;
|
|
regulator-max-microvolt = <2775000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vvideo_reg: vvideo {
|
|
regulator-min-microvolt = <2775000>;
|
|
regulator-max-microvolt = <2775000>;
|
|
};
|
|
|
|
vaudio_reg: vaudio {
|
|
regulator-min-microvolt = <2300000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
};
|
|
|
|
vcam_reg: vcam {
|
|
regulator-min-microvolt = <2500000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
};
|
|
|
|
vgen1_reg: vgen1 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
};
|
|
|
|
vgen2_reg: vgen2 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <3150000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen3_reg: vgen3 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2900000>;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
led-control = <0x0 0x0 0x3f83f8 0x0>;
|
|
|
|
sysled0@3 {
|
|
reg = <3>;
|
|
label = "system:green:status";
|
|
linux,default-trigger = "default-on";
|
|
};
|
|
|
|
sysled1@4 {
|
|
reg = <4>;
|
|
label = "system:green:act";
|
|
linux,default-trigger = "heartbeat";
|
|
};
|
|
};
|
|
};
|
|
|
|
flash@1 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "atmel,at45db642d", "atmel,at45", "atmel,dataflash";
|
|
spi-max-frequency = <25000000>;
|
|
reg = <1>;
|
|
};
|
|
};
|
|
|
|
&esdhc1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_esdhc1>;
|
|
bus-width = <4>;
|
|
no-1-8-v;
|
|
non-removable;
|
|
no-sdio;
|
|
no-sd;
|
|
status = "okay";
|
|
};
|
|
|
|
&fec {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_fec>;
|
|
phy-mode = "mii";
|
|
phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
|
|
phy-supply = <&vgen3_reg>;
|
|
status = "okay";
|
|
};
|
|
|
|
&gpio1 {
|
|
gpio-line-names = "", "", "", "",
|
|
"", "", "", "",
|
|
"", "hp-amp-shutdown-b", "", "",
|
|
"", "", "", "",
|
|
"", "", "", "",
|
|
"", "", "", "",
|
|
"", "", "", "",
|
|
"", "", "", "";
|
|
|
|
unused-sd3-wp-gpio {
|
|
/*
|
|
* See pinctrl_esdhc1 below for more details on this
|
|
*/
|
|
gpio-hog;
|
|
gpios = <1 GPIO_ACTIVE_HIGH>;
|
|
output-high;
|
|
};
|
|
};
|
|
|
|
&i2c2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c2>;
|
|
status = "okay";
|
|
|
|
hpa1: amp@60 {
|
|
compatible = "ti,tpa6130a2";
|
|
reg = <0x60>;
|
|
Vdd-supply = <®_3p3v>;
|
|
};
|
|
|
|
ds1341: rtc@68 {
|
|
compatible = "dallas,ds1341";
|
|
reg = <0x68>;
|
|
};
|
|
|
|
/* touch nodes default disabled, bootloader will enable the right one */
|
|
|
|
touchscreen@4b {
|
|
compatible = "atmel,maxtouch";
|
|
reg = <0x4b>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_ts>;
|
|
interrupt-parent = <&gpio3>;
|
|
interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
|
|
status = "disabled";
|
|
};
|
|
|
|
touchscreen@4c {
|
|
compatible = "atmel,maxtouch";
|
|
reg = <0x4c>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_ts>;
|
|
interrupt-parent = <&gpio3>;
|
|
interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
|
|
status = "disabled";
|
|
};
|
|
|
|
touchscreen@20 {
|
|
compatible = "syna,rmi4-i2c";
|
|
reg = <0x20>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_ts>;
|
|
interrupt-parent = <&gpio3>;
|
|
interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
|
|
status = "disabled";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
rmi4-f01@1 {
|
|
reg = <0x1>;
|
|
syna,nosleep-mode = <2>;
|
|
};
|
|
|
|
rmi4-f11@11 {
|
|
reg = <0x11>;
|
|
touchscreen-inverted-x;
|
|
touchscreen-swapped-x-y;
|
|
syna,sensor-type = <1>;
|
|
};
|
|
};
|
|
|
|
};
|
|
|
|
&ipu_di0_disp1 {
|
|
remote-endpoint = <&display_in>;
|
|
};
|
|
|
|
&pmu {
|
|
secure-reg-access;
|
|
};
|
|
|
|
&ssi2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart2>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart3>;
|
|
status = "okay";
|
|
|
|
rave-sp {
|
|
compatible = "zii,rave-sp-rdu1";
|
|
current-speed = <38400>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
watchdog {
|
|
compatible = "zii,rave-sp-watchdog";
|
|
};
|
|
|
|
backlight {
|
|
compatible = "zii,rave-sp-backlight";
|
|
};
|
|
|
|
pwrbutton {
|
|
compatible = "zii,rave-sp-pwrbutton";
|
|
};
|
|
|
|
eeprom@a3 {
|
|
compatible = "zii,rave-sp-eeprom";
|
|
reg = <0xa3 0x2000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
zii,eeprom-name = "dds-eeprom";
|
|
};
|
|
|
|
eeprom@a4 {
|
|
compatible = "zii,rave-sp-eeprom";
|
|
reg = <0xa4 0x4000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
zii,eeprom-name = "main-eeprom";
|
|
};
|
|
|
|
eeprom@ae {
|
|
compatible = "zii,rave-sp-eeprom";
|
|
reg = <0xae 0x200>;
|
|
zii,eeprom-name = "switch-eeprom";
|
|
/*
|
|
* Not all RDU1s have this functionality, so we
|
|
* rely on the bootloader to enable this
|
|
*/
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|
|
|
|
&usbh1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usbh1>;
|
|
dr_mode = "host";
|
|
phy_type = "ulpi";
|
|
fsl,usbphy = <&usbh1phy>;
|
|
disable-over-current;
|
|
maximum-speed = "full-speed";
|
|
vbus-supply = <®_5p0v_main>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbh2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usbh2>;
|
|
dr_mode = "host";
|
|
phy_type = "ulpi";
|
|
fsl,usbphy = <&usbh2phy>;
|
|
disable-over-current;
|
|
vbus-supply = <®_5p0v_main>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbphy0 {
|
|
vcc-supply = <&vusb_reg>;
|
|
};
|
|
|
|
&usbotg {
|
|
dr_mode = "host";
|
|
disable-over-current;
|
|
phy_type = "utmi_wide";
|
|
vbus-supply = <®_5p0v_main>;
|
|
status = "okay";
|
|
};
|
|
|
|
&wdog1 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&iomuxc {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_hog>;
|
|
|
|
pinctrl_hog: hoggrp {
|
|
fsl,pins = <
|
|
MX51_PAD_GPIO1_9__GPIO1_9 0x5e
|
|
>;
|
|
};
|
|
|
|
pinctrl_audmux: audmuxgrp {
|
|
fsl,pins = <
|
|
MX51_PAD_AUD3_BB_TXD__AUD3_TXD 0xa5
|
|
MX51_PAD_AUD3_BB_RXD__AUD3_RXD 0x85
|
|
MX51_PAD_AUD3_BB_CK__AUD3_TXC 0xa5
|
|
MX51_PAD_AUD3_BB_FS__AUD3_TXFS 0x85
|
|
>;
|
|
};
|
|
|
|
pinctrl_clk26mhz: clk26mhzgrp {
|
|
fsl,pins = <
|
|
MX51_PAD_DI1_PIN12__GPIO3_1 0x85
|
|
>;
|
|
};
|
|
|
|
pinctrl_ecspi1: ecspi1grp {
|
|
fsl,pins = <
|
|
MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185
|
|
MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185
|
|
MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185
|
|
MX51_PAD_CSPI1_SS0__GPIO4_24 0x85
|
|
MX51_PAD_CSPI1_SS1__GPIO4_25 0x85
|
|
>;
|
|
};
|
|
|
|
pinctrl_esdhc1: esdhc1grp {
|
|
fsl,pins = <
|
|
MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5
|
|
MX51_PAD_SD1_CLK__SD1_CLK 0x20d5
|
|
MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5
|
|
MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5
|
|
MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5
|
|
MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5
|
|
/*
|
|
* GPIO1_1 is not directly used by eSDHC1 in
|
|
* any capacity, but earlier versions of RDU1
|
|
* used that pin as WP GPIO for eSDHC3 and
|
|
* because of that that pad has an external
|
|
* pull-up resistor. This is problematic
|
|
* because out of reset the pad is configured
|
|
* as ALT0 which serves as SD1_WP, which, when
|
|
* pulled high by and external pull-up, will
|
|
* inhibit execution of any write request to
|
|
* attached eMMC device.
|
|
*
|
|
* To avoid this problem we configure the pad
|
|
* to ALT1/GPIO and avoid driving SD1_WP
|
|
* signal high.
|
|
*/
|
|
MX51_PAD_GPIO1_1__GPIO1_1 0x0000
|
|
>;
|
|
};
|
|
|
|
pinctrl_fec: fecgrp {
|
|
fsl,pins = <
|
|
MX51_PAD_EIM_EB2__FEC_MDIO 0x1f5
|
|
MX51_PAD_NANDF_D9__FEC_RDATA0 0x2180
|
|
MX51_PAD_EIM_EB3__FEC_RDATA1 0x180
|
|
MX51_PAD_EIM_CS2__FEC_RDATA2 0x180
|
|
MX51_PAD_EIM_CS3__FEC_RDATA3 0x180
|
|
MX51_PAD_EIM_CS4__FEC_RX_ER 0x180
|
|
MX51_PAD_NANDF_D11__FEC_RX_DV 0x2084
|
|
MX51_PAD_EIM_CS5__FEC_CRS 0x180
|
|
MX51_PAD_NANDF_RB2__FEC_COL 0x2180
|
|
MX51_PAD_NANDF_RB3__FEC_RX_CLK 0x2180
|
|
MX51_PAD_NANDF_CS2__FEC_TX_ER 0x2004
|
|
MX51_PAD_NANDF_CS3__FEC_MDC 0x2004
|
|
MX51_PAD_NANDF_D8__FEC_TDATA0 0x2180
|
|
MX51_PAD_NANDF_CS4__FEC_TDATA1 0x2004
|
|
MX51_PAD_NANDF_CS5__FEC_TDATA2 0x2004
|
|
MX51_PAD_NANDF_CS6__FEC_TDATA3 0x2004
|
|
MX51_PAD_DISP2_DAT9__FEC_TX_EN 0x2004
|
|
MX51_PAD_DISP2_DAT13__FEC_TX_CLK 0x2180
|
|
MX51_PAD_EIM_A20__GPIO2_14 0x85
|
|
>;
|
|
};
|
|
|
|
pinctrl_gpiospi0: gpiospi0grp {
|
|
fsl,pins = <
|
|
MX51_PAD_CSI2_D18__GPIO4_11 0x85
|
|
MX51_PAD_CSI2_D19__GPIO4_12 0x85
|
|
MX51_PAD_CSI2_HSYNC__GPIO4_14 0x85
|
|
MX51_PAD_CSI2_PIXCLK__GPIO4_15 0x85
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c2: i2c2grp {
|
|
fsl,pins = <
|
|
MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed
|
|
MX51_PAD_KEY_COL5__I2C2_SDA 0x400001ed
|
|
>;
|
|
};
|
|
|
|
pinctrl_ipu_disp1: ipudisp1grp {
|
|
fsl,pins = <
|
|
MX51_PAD_DISP1_DAT0__DISP1_DAT0 0x5
|
|
MX51_PAD_DISP1_DAT1__DISP1_DAT1 0x5
|
|
MX51_PAD_DISP1_DAT2__DISP1_DAT2 0x5
|
|
MX51_PAD_DISP1_DAT3__DISP1_DAT3 0x5
|
|
MX51_PAD_DISP1_DAT4__DISP1_DAT4 0x5
|
|
MX51_PAD_DISP1_DAT5__DISP1_DAT5 0x5
|
|
MX51_PAD_DISP1_DAT6__DISP1_DAT6 0x5
|
|
MX51_PAD_DISP1_DAT7__DISP1_DAT7 0x5
|
|
MX51_PAD_DISP1_DAT8__DISP1_DAT8 0x5
|
|
MX51_PAD_DISP1_DAT9__DISP1_DAT9 0x5
|
|
MX51_PAD_DISP1_DAT10__DISP1_DAT10 0x5
|
|
MX51_PAD_DISP1_DAT11__DISP1_DAT11 0x5
|
|
MX51_PAD_DISP1_DAT12__DISP1_DAT12 0x5
|
|
MX51_PAD_DISP1_DAT13__DISP1_DAT13 0x5
|
|
MX51_PAD_DISP1_DAT14__DISP1_DAT14 0x5
|
|
MX51_PAD_DISP1_DAT15__DISP1_DAT15 0x5
|
|
MX51_PAD_DISP1_DAT16__DISP1_DAT16 0x5
|
|
MX51_PAD_DISP1_DAT17__DISP1_DAT17 0x5
|
|
MX51_PAD_DISP1_DAT18__DISP1_DAT18 0x5
|
|
MX51_PAD_DISP1_DAT19__DISP1_DAT19 0x5
|
|
MX51_PAD_DISP1_DAT20__DISP1_DAT20 0x5
|
|
MX51_PAD_DISP1_DAT21__DISP1_DAT21 0x5
|
|
MX51_PAD_DISP1_DAT22__DISP1_DAT22 0x5
|
|
MX51_PAD_DISP1_DAT23__DISP1_DAT23 0x5
|
|
MX51_PAD_DI1_PIN2__DI1_PIN2 0x5
|
|
MX51_PAD_DI1_PIN3__DI1_PIN3 0x5
|
|
MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK 0x5
|
|
>;
|
|
};
|
|
|
|
pinctrl_panel: panelgrp {
|
|
fsl,pins = <
|
|
MX51_PAD_DI1_D0_CS__GPIO3_3 0x85
|
|
>;
|
|
};
|
|
|
|
pinctrl_pmic: pmicgrp {
|
|
fsl,pins = <
|
|
MX51_PAD_GPIO1_4__GPIO1_4 0x1e0
|
|
MX51_PAD_GPIO1_8__GPIO1_8 0x21e2
|
|
>;
|
|
};
|
|
|
|
pinctrl_sndgate26mhz: sndgate26mhzgrp {
|
|
fsl,pins = <
|
|
MX51_PAD_CSPI1_RDY__GPIO4_26 0x85
|
|
>;
|
|
};
|
|
|
|
pinctrl_swi2c: swi2cgrp {
|
|
fsl,pins = <
|
|
MX51_PAD_GPIO1_2__GPIO1_2 0xc5
|
|
MX51_PAD_DI1_D1_CS__GPIO3_4 0x400001f5
|
|
>;
|
|
};
|
|
|
|
pinctrl_swmdio: swmdiogrp {
|
|
fsl,pins = <
|
|
MX51_PAD_NANDF_D14__GPIO3_26 0x21e6
|
|
MX51_PAD_NANDF_D15__GPIO3_25 0x21e6
|
|
>;
|
|
};
|
|
|
|
pinctrl_ts: tsgrp {
|
|
fsl,pins = <
|
|
MX51_PAD_CSI1_D8__GPIO3_12 0x04
|
|
MX51_PAD_CSI1_D9__GPIO3_13 0x85
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart1: uart1grp {
|
|
fsl,pins = <
|
|
MX51_PAD_UART1_RXD__UART1_RXD 0x1c5
|
|
MX51_PAD_UART1_TXD__UART1_TXD 0x1c5
|
|
MX51_PAD_UART1_RTS__UART1_RTS 0x1c4
|
|
MX51_PAD_UART1_CTS__UART1_CTS 0x1c4
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart2: uart2grp {
|
|
fsl,pins = <
|
|
MX51_PAD_UART2_RXD__UART2_RXD 0xc5
|
|
MX51_PAD_UART2_TXD__UART2_TXD 0xc5
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart3: uart3grp {
|
|
fsl,pins = <
|
|
MX51_PAD_EIM_D25__UART3_RXD 0x1c5
|
|
MX51_PAD_EIM_D26__UART3_TXD 0x1c5
|
|
>;
|
|
};
|
|
|
|
pinctrl_usbgate26mhz: usbgate26mhzgrp {
|
|
fsl,pins = <
|
|
MX51_PAD_DISP2_DAT6__GPIO1_19 0x85
|
|
>;
|
|
};
|
|
|
|
pinctrl_usbh1: usbh1grp {
|
|
fsl,pins = <
|
|
MX51_PAD_USBH1_STP__USBH1_STP 0x0
|
|
MX51_PAD_USBH1_CLK__USBH1_CLK 0x0
|
|
MX51_PAD_USBH1_DIR__USBH1_DIR 0x0
|
|
MX51_PAD_USBH1_NXT__USBH1_NXT 0x0
|
|
MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x0
|
|
MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x0
|
|
MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x0
|
|
MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x0
|
|
MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x0
|
|
MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x0
|
|
MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x0
|
|
MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x0
|
|
>;
|
|
};
|
|
|
|
pinctrl_usbh1phy: usbh1phygrp {
|
|
fsl,pins = <
|
|
MX51_PAD_NANDF_D0__GPIO4_8 0x85
|
|
>;
|
|
};
|
|
|
|
pinctrl_usbh2: usbh2grp {
|
|
fsl,pins = <
|
|
MX51_PAD_EIM_A26__USBH2_STP 0x0
|
|
MX51_PAD_EIM_A24__USBH2_CLK 0x0
|
|
MX51_PAD_EIM_A25__USBH2_DIR 0x0
|
|
MX51_PAD_EIM_A27__USBH2_NXT 0x0
|
|
MX51_PAD_EIM_D16__USBH2_DATA0 0x0
|
|
MX51_PAD_EIM_D17__USBH2_DATA1 0x0
|
|
MX51_PAD_EIM_D18__USBH2_DATA2 0x0
|
|
MX51_PAD_EIM_D19__USBH2_DATA3 0x0
|
|
MX51_PAD_EIM_D20__USBH2_DATA4 0x0
|
|
MX51_PAD_EIM_D21__USBH2_DATA5 0x0
|
|
MX51_PAD_EIM_D22__USBH2_DATA6 0x0
|
|
MX51_PAD_EIM_D23__USBH2_DATA7 0x0
|
|
>;
|
|
};
|
|
|
|
pinctrl_usbh2phy: usbh2phygrp {
|
|
fsl,pins = <
|
|
MX51_PAD_NANDF_D1__GPIO4_7 0x85
|
|
>;
|
|
};
|
|
};
|