Ben Hutchings 177dfcd80f sfc: Add support for sub-10G speeds ... The SFC4000 has a separate MAC for use at sub-10G speeds. Introduce an efx_mac_operations structure with implementations for the two MACs. Switch between the MACs as necessary. PHY settings are independent of the MAC, so add get_settings() and set_settings() to efx_phy_operations. Also add macs field to indicate which MACs the PHY is connected to. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>		2008-12-12 21:58:17 -08:00
..
bitfield.h	sfc: Extend self-tests	2008-09-03 09:53:48 -04:00
boards.c	sfc: Clean up board identification	2008-12-12 21:58:00 -08:00
boards.h	sfc: Clean up board identification	2008-12-12 21:58:00 -08:00
efx.c	sfc: Add support for sub-10G speeds	2008-12-12 21:58:17 -08:00
efx.h	sfc: Expose flash region storing boot code as MTD	2008-11-06 00:49:57 -05:00
enum.h	sfc: Add support for sub-10G speeds	2008-12-12 21:58:17 -08:00
ethtool.c	sfc: Add support for sub-10G speeds	2008-12-12 21:58:17 -08:00
ethtool.h	New driver "sfc" for Solarstorm SFC4000 controller.	2008-04-29 01:42:43 -04:00
falcon_gmac.c	sfc: Add support for sub-10G speeds	2008-12-12 21:58:17 -08:00
falcon_hwdefs.h	sfc: Add support for sub-10G speeds	2008-12-12 21:58:17 -08:00
falcon_io.h	sfc: Don't include net_driver.h from falcon_io.h	2008-09-24 18:54:38 -04:00
falcon_xmac.c	sfc: Add support for sub-10G speeds	2008-12-12 21:58:17 -08:00
falcon.c	sfc: Add support for sub-10G speeds	2008-12-12 21:58:17 -08:00
falcon.h	sfc: Add support for sub-10G speeds	2008-12-12 21:58:17 -08:00
gmii.h	sfc: Remove MII extension cruft	2008-12-12 21:57:57 -08:00
Kconfig	sfc: Fix dependency for SFC_MTD	2008-11-20 04:17:42 -08:00
mac.h	sfc: Add support for sub-10G speeds	2008-12-12 21:58:17 -08:00
Makefile	sfc: Add support for sub-10G speeds	2008-12-12 21:58:17 -08:00
mdio_10g.c	sfc: Clean up MDIO flag setting	2008-12-12 21:58:16 -08:00
mdio_10g.h	sfc: Clean up MDIO flag setting	2008-12-12 21:58:16 -08:00
mtd.c	sfc: Clean up waits for flash/EEPROM operations	2008-12-12 21:57:35 -08:00
net_driver.h	sfc: Add support for sub-10G speeds	2008-12-12 21:58:17 -08:00
phy.h	sfc: Make PHY flash mode a device attribute, not a module parameter	2008-09-03 09:53:47 -04:00
rx.c	drivers/net: Kill now superfluous ->last_rx stores.	2008-11-03 21:11:17 -08:00
rx.h	sfc: Remove some unreachable error paths	2008-09-03 09:53:48 -04:00
selftest.c	sfc: Add support for sub-10G speeds	2008-12-12 21:58:17 -08:00
selftest.h	sfc: Add support for sub-10G speeds	2008-12-12 21:58:17 -08:00
sfe4001.c	sfc: Add support for sub-10G speeds	2008-12-12 21:58:17 -08:00
spi.h	sfc: Clean up waits for flash/EEPROM operations	2008-12-12 21:57:35 -08:00
tenxpress.c	sfc: Add support for sub-10G speeds	2008-12-12 21:58:17 -08:00
tx.c	sfc: Use CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS where appropriate	2008-09-24 18:54:42 -04:00
tx.h	sfc: Remove some unreachable error paths	2008-09-03 09:53:48 -04:00
workarounds.h	sfc: Use lm87 and lm90 drivers for board temperature/power monitoring	2008-11-06 00:50:09 -05:00
xenpack.h	New driver "sfc" for Solarstorm SFC4000 controller.	2008-04-29 01:42:43 -04:00
xfp_phy.c	sfc: Add support for sub-10G speeds	2008-12-12 21:58:17 -08:00