mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-26 13:44:15 +08:00
3a253caaad
Add TPM 2.0 compatible I2C interface for chips with cr50 firmware. The firmware running on the currently supported H1 MCU requires a special driver to handle its specific protocol, and this makes it unsuitable to use tpm_tis_core_* and instead it must implement the underlying TPM protocol similar to the other I2C TPM drivers. - All 4 bytes of status register must be read/written at once. - FIFO and burst count is limited to 63 and must be drained by AP. - Provides an interrupt to indicate when read response data is ready and when the TPM is finished processing write data. This driver is based on the existing infineon I2C TPM driver, which most closely matches the cr50 i2c protocol behavior. Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com> Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com> Tested-by: Adrian Ratiu <adrian.ratiu@collabora.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
204 lines
7.2 KiB
Plaintext
204 lines
7.2 KiB
Plaintext
# SPDX-License-Identifier: GPL-2.0-only
|
|
#
|
|
# TPM device configuration
|
|
#
|
|
|
|
menuconfig TCG_TPM
|
|
tristate "TPM Hardware Support"
|
|
depends on HAS_IOMEM
|
|
imply SECURITYFS
|
|
select CRYPTO
|
|
select CRYPTO_HASH_INFO
|
|
help
|
|
If you have a TPM security chip in your system, which
|
|
implements the Trusted Computing Group's specification,
|
|
say Yes and it will be accessible from within Linux. For
|
|
more information see <http://www.trustedcomputinggroup.org>.
|
|
An implementation of the Trusted Software Stack (TSS), the
|
|
userspace enablement piece of the specification, can be
|
|
obtained at: <http://sourceforge.net/projects/trousers>. To
|
|
compile this driver as a module, choose M here; the module
|
|
will be called tpm. If unsure, say N.
|
|
Notes:
|
|
1) For more TPM drivers enable CONFIG_PNP, CONFIG_ACPI
|
|
and CONFIG_PNPACPI.
|
|
2) Without ACPI enabled, the BIOS event log won't be accessible,
|
|
which is required to validate the PCR 0-7 values.
|
|
|
|
if TCG_TPM
|
|
|
|
config HW_RANDOM_TPM
|
|
bool "TPM HW Random Number Generator support"
|
|
depends on TCG_TPM && HW_RANDOM && !(TCG_TPM=y && HW_RANDOM=m)
|
|
default y
|
|
help
|
|
This setting exposes the TPM's Random Number Generator as a hwrng
|
|
device. This allows the kernel to collect randomness from the TPM at
|
|
boot, and provides the TPM randomines in /dev/hwrng.
|
|
|
|
If unsure, say Y.
|
|
|
|
config TCG_TIS_CORE
|
|
tristate
|
|
help
|
|
TCG TIS TPM core driver. It implements the TPM TCG TIS logic and hooks
|
|
into the TPM kernel APIs. Physical layers will register against it.
|
|
|
|
config TCG_TIS
|
|
tristate "TPM Interface Specification 1.2 Interface / TPM 2.0 FIFO Interface"
|
|
depends on X86 || OF
|
|
select TCG_TIS_CORE
|
|
help
|
|
If you have a TPM security chip that is compliant with the
|
|
TCG TIS 1.2 TPM specification (TPM1.2) or the TCG PTP FIFO
|
|
specification (TPM2.0) say Yes and it will be accessible from
|
|
within Linux. To compile this driver as a module, choose M here;
|
|
the module will be called tpm_tis.
|
|
|
|
config TCG_TIS_SPI
|
|
tristate "TPM Interface Specification 1.3 Interface / TPM 2.0 FIFO Interface - (SPI)"
|
|
depends on SPI
|
|
select TCG_TIS_CORE
|
|
help
|
|
If you have a TPM security chip which is connected to a regular,
|
|
non-tcg SPI master (i.e. most embedded platforms) that is compliant with the
|
|
TCG TIS 1.3 TPM specification (TPM1.2) or the TCG PTP FIFO
|
|
specification (TPM2.0) say Yes and it will be accessible from
|
|
within Linux. To compile this driver as a module, choose M here;
|
|
the module will be called tpm_tis_spi.
|
|
|
|
config TCG_TIS_SPI_CR50
|
|
bool "Cr50 SPI Interface"
|
|
depends on TCG_TIS_SPI
|
|
help
|
|
If you have a H1 secure module running Cr50 firmware on SPI bus,
|
|
say Yes and it will be accessible from within Linux.
|
|
|
|
config TCG_TIS_SYNQUACER
|
|
tristate "TPM Interface Specification 1.2 Interface / TPM 2.0 FIFO Interface (MMIO - SynQuacer)"
|
|
depends on ARCH_SYNQUACER
|
|
select TCG_TIS_CORE
|
|
help
|
|
If you have a TPM security chip that is compliant with the
|
|
TCG TIS 1.2 TPM specification (TPM1.2) or the TCG PTP FIFO
|
|
specification (TPM2.0) say Yes and it will be accessible from
|
|
within Linux on Socionext SynQuacer platform.
|
|
To compile this driver as a module, choose M here;
|
|
the module will be called tpm_tis_synquacer.
|
|
|
|
config TCG_TIS_I2C_CR50
|
|
tristate "TPM Interface Specification 2.0 Interface (I2C - CR50)"
|
|
depends on I2C
|
|
select TCG_CR50
|
|
help
|
|
This is a driver for the Google cr50 I2C TPM interface which is a
|
|
custom microcontroller and requires a custom i2c protocol interface
|
|
to handle the limitations of the hardware. To compile this driver
|
|
as a module, choose M here; the module will be called tcg_tis_i2c_cr50.
|
|
|
|
config TCG_TIS_I2C_ATMEL
|
|
tristate "TPM Interface Specification 1.2 Interface (I2C - Atmel)"
|
|
depends on I2C
|
|
help
|
|
If you have an Atmel I2C TPM security chip say Yes and it will be
|
|
accessible from within Linux.
|
|
To compile this driver as a module, choose M here; the module will
|
|
be called tpm_tis_i2c_atmel.
|
|
|
|
config TCG_TIS_I2C_INFINEON
|
|
tristate "TPM Interface Specification 1.2 Interface (I2C - Infineon)"
|
|
depends on I2C
|
|
help
|
|
If you have a TPM security chip that is compliant with the
|
|
TCG TIS 1.2 TPM specification and Infineon's I2C Protocol Stack
|
|
Specification 0.20 say Yes and it will be accessible from within
|
|
Linux.
|
|
To compile this driver as a module, choose M here; the module
|
|
will be called tpm_i2c_infineon.
|
|
|
|
config TCG_TIS_I2C_NUVOTON
|
|
tristate "TPM Interface Specification 1.2 Interface (I2C - Nuvoton)"
|
|
depends on I2C
|
|
help
|
|
If you have a TPM security chip with an I2C interface from
|
|
Nuvoton Technology Corp. say Yes and it will be accessible
|
|
from within Linux.
|
|
To compile this driver as a module, choose M here; the module
|
|
will be called tpm_i2c_nuvoton.
|
|
|
|
config TCG_NSC
|
|
tristate "National Semiconductor TPM Interface"
|
|
depends on X86
|
|
help
|
|
If you have a TPM security chip from National Semiconductor
|
|
say Yes and it will be accessible from within Linux. To
|
|
compile this driver as a module, choose M here; the module
|
|
will be called tpm_nsc.
|
|
|
|
config TCG_ATMEL
|
|
tristate "Atmel TPM Interface"
|
|
depends on PPC64 || HAS_IOPORT_MAP
|
|
help
|
|
If you have a TPM security chip from Atmel say Yes and it
|
|
will be accessible from within Linux. To compile this driver
|
|
as a module, choose M here; the module will be called tpm_atmel.
|
|
|
|
config TCG_INFINEON
|
|
tristate "Infineon Technologies TPM Interface"
|
|
depends on PNP
|
|
help
|
|
If you have a TPM security chip from Infineon Technologies
|
|
(either SLD 9630 TT 1.1 or SLB 9635 TT 1.2) say Yes and it
|
|
will be accessible from within Linux.
|
|
To compile this driver as a module, choose M here; the module
|
|
will be called tpm_infineon.
|
|
Further information on this driver and the supported hardware
|
|
can be found at http://www.trust.rub.de/projects/linux-device-driver-infineon-tpm/
|
|
|
|
config TCG_IBMVTPM
|
|
tristate "IBM VTPM Interface"
|
|
depends on PPC_PSERIES
|
|
help
|
|
If you have IBM virtual TPM (VTPM) support say Yes and it
|
|
will be accessible from within Linux. To compile this driver
|
|
as a module, choose M here; the module will be called tpm_ibmvtpm.
|
|
|
|
config TCG_XEN
|
|
tristate "XEN TPM Interface"
|
|
depends on TCG_TPM && XEN
|
|
select XEN_XENBUS_FRONTEND
|
|
help
|
|
If you want to make TPM support available to a Xen user domain,
|
|
say Yes and it will be accessible from within Linux. See
|
|
the manpages for xl, xl.conf, and docs/misc/vtpm.txt in
|
|
the Xen source repository for more details.
|
|
To compile this driver as a module, choose M here; the module
|
|
will be called xen-tpmfront.
|
|
|
|
config TCG_CRB
|
|
tristate "TPM 2.0 CRB Interface"
|
|
depends on ACPI
|
|
help
|
|
If you have a TPM security chip that is compliant with the
|
|
TCG CRB 2.0 TPM specification say Yes and it will be accessible
|
|
from within Linux. To compile this driver as a module, choose
|
|
M here; the module will be called tpm_crb.
|
|
|
|
config TCG_VTPM_PROXY
|
|
tristate "VTPM Proxy Interface"
|
|
depends on TCG_TPM
|
|
help
|
|
This driver proxies for an emulated TPM (vTPM) running in userspace.
|
|
A device /dev/vtpmx is provided that creates a device pair
|
|
/dev/vtpmX and a server-side file descriptor on which the vTPM
|
|
can receive commands.
|
|
|
|
config TCG_FTPM_TEE
|
|
tristate "TEE based fTPM Interface"
|
|
depends on TEE && OPTEE
|
|
help
|
|
This driver proxies for firmware TPM running in TEE.
|
|
|
|
source "drivers/char/tpm/st33zp24/Kconfig"
|
|
endif # TCG_TPM
|