mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-17 07:54:54 +08:00
201ed7f327
At the moment we create a small window only for 32bit devices, the window maps 0..2GB of the PCI space only. For other devices we either use a sketchy bypass or hardware bypass but the former can only work if the amount of RAM is no bigger than the device's DMA mask and the latter requires devices to support at least 59bit DMA. This extends the default DMA window to the maximum size possible to allow a wider DMA mask than just 32bit. The default window size is now limited by the the iommu_table::it_map allocation bitmap which is a contiguous array, 1 bit per an IOMMU page. This increases the default IOMMU page size from hard coded 4K to the system page size to allow wider DMA masks. This increases the level number to not exceed the max order allocation limit per TCE level. By the same time, this keeps minimal levels number as 2 in order to save memory. As the extended window now overlaps the 32bit MMIO region, this adds an area reservation to iommu_init_table(). After this change the default window size is 0x80000000000==1<<43 so devices limited to DMA mask smaller than the amount of system RAM can still use more than just 2GB of memory for DMA. This is an optimization and not a bug fix for DMA API usage. With the on-demand allocation of indirect TCE table levels enabled and 2 levels, the first TCE level size is just 1<<ceil((log2(0x7ffffffffff+1)-16)/2)=16384 TCEs or 2 system pages. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190718051139.74787-5-aik@ozlabs.ru
1089 lines
30 KiB
C
1089 lines
30 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* IOMMU implementation for Cell Broadband Processor Architecture
|
|
*
|
|
* (C) Copyright IBM Corporation 2006-2008
|
|
*
|
|
* Author: Jeremy Kerr <jk@ozlabs.org>
|
|
*/
|
|
|
|
#undef DEBUG
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/notifier.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/memblock.h>
|
|
|
|
#include <asm/prom.h>
|
|
#include <asm/iommu.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/pci-bridge.h>
|
|
#include <asm/udbg.h>
|
|
#include <asm/firmware.h>
|
|
#include <asm/cell-regs.h>
|
|
|
|
#include "cell.h"
|
|
#include "interrupt.h"
|
|
|
|
/* Define CELL_IOMMU_REAL_UNMAP to actually unmap non-used pages
|
|
* instead of leaving them mapped to some dummy page. This can be
|
|
* enabled once the appropriate workarounds for spider bugs have
|
|
* been enabled
|
|
*/
|
|
#define CELL_IOMMU_REAL_UNMAP
|
|
|
|
/* Define CELL_IOMMU_STRICT_PROTECTION to enforce protection of
|
|
* IO PTEs based on the transfer direction. That can be enabled
|
|
* once spider-net has been fixed to pass the correct direction
|
|
* to the DMA mapping functions
|
|
*/
|
|
#define CELL_IOMMU_STRICT_PROTECTION
|
|
|
|
|
|
#define NR_IOMMUS 2
|
|
|
|
/* IOC mmap registers */
|
|
#define IOC_Reg_Size 0x2000
|
|
|
|
#define IOC_IOPT_CacheInvd 0x908
|
|
#define IOC_IOPT_CacheInvd_NE_Mask 0xffe0000000000000ul
|
|
#define IOC_IOPT_CacheInvd_IOPTE_Mask 0x000003fffffffff8ul
|
|
#define IOC_IOPT_CacheInvd_Busy 0x0000000000000001ul
|
|
|
|
#define IOC_IOST_Origin 0x918
|
|
#define IOC_IOST_Origin_E 0x8000000000000000ul
|
|
#define IOC_IOST_Origin_HW 0x0000000000000800ul
|
|
#define IOC_IOST_Origin_HL 0x0000000000000400ul
|
|
|
|
#define IOC_IO_ExcpStat 0x920
|
|
#define IOC_IO_ExcpStat_V 0x8000000000000000ul
|
|
#define IOC_IO_ExcpStat_SPF_Mask 0x6000000000000000ul
|
|
#define IOC_IO_ExcpStat_SPF_S 0x6000000000000000ul
|
|
#define IOC_IO_ExcpStat_SPF_P 0x2000000000000000ul
|
|
#define IOC_IO_ExcpStat_ADDR_Mask 0x00000007fffff000ul
|
|
#define IOC_IO_ExcpStat_RW_Mask 0x0000000000000800ul
|
|
#define IOC_IO_ExcpStat_IOID_Mask 0x00000000000007fful
|
|
|
|
#define IOC_IO_ExcpMask 0x928
|
|
#define IOC_IO_ExcpMask_SFE 0x4000000000000000ul
|
|
#define IOC_IO_ExcpMask_PFE 0x2000000000000000ul
|
|
|
|
#define IOC_IOCmd_Offset 0x1000
|
|
|
|
#define IOC_IOCmd_Cfg 0xc00
|
|
#define IOC_IOCmd_Cfg_TE 0x0000800000000000ul
|
|
|
|
|
|
/* Segment table entries */
|
|
#define IOSTE_V 0x8000000000000000ul /* valid */
|
|
#define IOSTE_H 0x4000000000000000ul /* cache hint */
|
|
#define IOSTE_PT_Base_RPN_Mask 0x3ffffffffffff000ul /* base RPN of IOPT */
|
|
#define IOSTE_NPPT_Mask 0x0000000000000fe0ul /* no. pages in IOPT */
|
|
#define IOSTE_PS_Mask 0x0000000000000007ul /* page size */
|
|
#define IOSTE_PS_4K 0x0000000000000001ul /* - 4kB */
|
|
#define IOSTE_PS_64K 0x0000000000000003ul /* - 64kB */
|
|
#define IOSTE_PS_1M 0x0000000000000005ul /* - 1MB */
|
|
#define IOSTE_PS_16M 0x0000000000000007ul /* - 16MB */
|
|
|
|
|
|
/* IOMMU sizing */
|
|
#define IO_SEGMENT_SHIFT 28
|
|
#define IO_PAGENO_BITS(shift) (IO_SEGMENT_SHIFT - (shift))
|
|
|
|
/* The high bit needs to be set on every DMA address */
|
|
#define SPIDER_DMA_OFFSET 0x80000000ul
|
|
|
|
struct iommu_window {
|
|
struct list_head list;
|
|
struct cbe_iommu *iommu;
|
|
unsigned long offset;
|
|
unsigned long size;
|
|
unsigned int ioid;
|
|
struct iommu_table table;
|
|
};
|
|
|
|
#define NAMESIZE 8
|
|
struct cbe_iommu {
|
|
int nid;
|
|
char name[NAMESIZE];
|
|
void __iomem *xlate_regs;
|
|
void __iomem *cmd_regs;
|
|
unsigned long *stab;
|
|
unsigned long *ptab;
|
|
void *pad_page;
|
|
struct list_head windows;
|
|
};
|
|
|
|
/* Static array of iommus, one per node
|
|
* each contains a list of windows, keyed from dma_window property
|
|
* - on bus setup, look for a matching window, or create one
|
|
* - on dev setup, assign iommu_table ptr
|
|
*/
|
|
static struct cbe_iommu iommus[NR_IOMMUS];
|
|
static int cbe_nr_iommus;
|
|
|
|
static void invalidate_tce_cache(struct cbe_iommu *iommu, unsigned long *pte,
|
|
long n_ptes)
|
|
{
|
|
u64 __iomem *reg;
|
|
u64 val;
|
|
long n;
|
|
|
|
reg = iommu->xlate_regs + IOC_IOPT_CacheInvd;
|
|
|
|
while (n_ptes > 0) {
|
|
/* we can invalidate up to 1 << 11 PTEs at once */
|
|
n = min(n_ptes, 1l << 11);
|
|
val = (((n /*- 1*/) << 53) & IOC_IOPT_CacheInvd_NE_Mask)
|
|
| (__pa(pte) & IOC_IOPT_CacheInvd_IOPTE_Mask)
|
|
| IOC_IOPT_CacheInvd_Busy;
|
|
|
|
out_be64(reg, val);
|
|
while (in_be64(reg) & IOC_IOPT_CacheInvd_Busy)
|
|
;
|
|
|
|
n_ptes -= n;
|
|
pte += n;
|
|
}
|
|
}
|
|
|
|
static int tce_build_cell(struct iommu_table *tbl, long index, long npages,
|
|
unsigned long uaddr, enum dma_data_direction direction,
|
|
unsigned long attrs)
|
|
{
|
|
int i;
|
|
unsigned long *io_pte, base_pte;
|
|
struct iommu_window *window =
|
|
container_of(tbl, struct iommu_window, table);
|
|
|
|
/* implementing proper protection causes problems with the spidernet
|
|
* driver - check mapping directions later, but allow read & write by
|
|
* default for now.*/
|
|
#ifdef CELL_IOMMU_STRICT_PROTECTION
|
|
/* to avoid referencing a global, we use a trick here to setup the
|
|
* protection bit. "prot" is setup to be 3 fields of 4 bits appended
|
|
* together for each of the 3 supported direction values. It is then
|
|
* shifted left so that the fields matching the desired direction
|
|
* lands on the appropriate bits, and other bits are masked out.
|
|
*/
|
|
const unsigned long prot = 0xc48;
|
|
base_pte =
|
|
((prot << (52 + 4 * direction)) &
|
|
(CBE_IOPTE_PP_W | CBE_IOPTE_PP_R)) |
|
|
CBE_IOPTE_M | CBE_IOPTE_SO_RW |
|
|
(window->ioid & CBE_IOPTE_IOID_Mask);
|
|
#else
|
|
base_pte = CBE_IOPTE_PP_W | CBE_IOPTE_PP_R | CBE_IOPTE_M |
|
|
CBE_IOPTE_SO_RW | (window->ioid & CBE_IOPTE_IOID_Mask);
|
|
#endif
|
|
if (unlikely(attrs & DMA_ATTR_WEAK_ORDERING))
|
|
base_pte &= ~CBE_IOPTE_SO_RW;
|
|
|
|
io_pte = (unsigned long *)tbl->it_base + (index - tbl->it_offset);
|
|
|
|
for (i = 0; i < npages; i++, uaddr += (1 << tbl->it_page_shift))
|
|
io_pte[i] = base_pte | (__pa(uaddr) & CBE_IOPTE_RPN_Mask);
|
|
|
|
mb();
|
|
|
|
invalidate_tce_cache(window->iommu, io_pte, npages);
|
|
|
|
pr_debug("tce_build_cell(index=%lx,n=%lx,dir=%d,base_pte=%lx)\n",
|
|
index, npages, direction, base_pte);
|
|
return 0;
|
|
}
|
|
|
|
static void tce_free_cell(struct iommu_table *tbl, long index, long npages)
|
|
{
|
|
|
|
int i;
|
|
unsigned long *io_pte, pte;
|
|
struct iommu_window *window =
|
|
container_of(tbl, struct iommu_window, table);
|
|
|
|
pr_debug("tce_free_cell(index=%lx,n=%lx)\n", index, npages);
|
|
|
|
#ifdef CELL_IOMMU_REAL_UNMAP
|
|
pte = 0;
|
|
#else
|
|
/* spider bridge does PCI reads after freeing - insert a mapping
|
|
* to a scratch page instead of an invalid entry */
|
|
pte = CBE_IOPTE_PP_R | CBE_IOPTE_M | CBE_IOPTE_SO_RW |
|
|
__pa(window->iommu->pad_page) |
|
|
(window->ioid & CBE_IOPTE_IOID_Mask);
|
|
#endif
|
|
|
|
io_pte = (unsigned long *)tbl->it_base + (index - tbl->it_offset);
|
|
|
|
for (i = 0; i < npages; i++)
|
|
io_pte[i] = pte;
|
|
|
|
mb();
|
|
|
|
invalidate_tce_cache(window->iommu, io_pte, npages);
|
|
}
|
|
|
|
static irqreturn_t ioc_interrupt(int irq, void *data)
|
|
{
|
|
unsigned long stat, spf;
|
|
struct cbe_iommu *iommu = data;
|
|
|
|
stat = in_be64(iommu->xlate_regs + IOC_IO_ExcpStat);
|
|
spf = stat & IOC_IO_ExcpStat_SPF_Mask;
|
|
|
|
/* Might want to rate limit it */
|
|
printk(KERN_ERR "iommu: DMA exception 0x%016lx\n", stat);
|
|
printk(KERN_ERR " V=%d, SPF=[%c%c], RW=%s, IOID=0x%04x\n",
|
|
!!(stat & IOC_IO_ExcpStat_V),
|
|
(spf == IOC_IO_ExcpStat_SPF_S) ? 'S' : ' ',
|
|
(spf == IOC_IO_ExcpStat_SPF_P) ? 'P' : ' ',
|
|
(stat & IOC_IO_ExcpStat_RW_Mask) ? "Read" : "Write",
|
|
(unsigned int)(stat & IOC_IO_ExcpStat_IOID_Mask));
|
|
printk(KERN_ERR " page=0x%016lx\n",
|
|
stat & IOC_IO_ExcpStat_ADDR_Mask);
|
|
|
|
/* clear interrupt */
|
|
stat &= ~IOC_IO_ExcpStat_V;
|
|
out_be64(iommu->xlate_regs + IOC_IO_ExcpStat, stat);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int cell_iommu_find_ioc(int nid, unsigned long *base)
|
|
{
|
|
struct device_node *np;
|
|
struct resource r;
|
|
|
|
*base = 0;
|
|
|
|
/* First look for new style /be nodes */
|
|
for_each_node_by_name(np, "ioc") {
|
|
if (of_node_to_nid(np) != nid)
|
|
continue;
|
|
if (of_address_to_resource(np, 0, &r)) {
|
|
printk(KERN_ERR "iommu: can't get address for %pOF\n",
|
|
np);
|
|
continue;
|
|
}
|
|
*base = r.start;
|
|
of_node_put(np);
|
|
return 0;
|
|
}
|
|
|
|
/* Ok, let's try the old way */
|
|
for_each_node_by_type(np, "cpu") {
|
|
const unsigned int *nidp;
|
|
const unsigned long *tmp;
|
|
|
|
nidp = of_get_property(np, "node-id", NULL);
|
|
if (nidp && *nidp == nid) {
|
|
tmp = of_get_property(np, "ioc-translation", NULL);
|
|
if (tmp) {
|
|
*base = *tmp;
|
|
of_node_put(np);
|
|
return 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
return -ENODEV;
|
|
}
|
|
|
|
static void cell_iommu_setup_stab(struct cbe_iommu *iommu,
|
|
unsigned long dbase, unsigned long dsize,
|
|
unsigned long fbase, unsigned long fsize)
|
|
{
|
|
struct page *page;
|
|
unsigned long segments, stab_size;
|
|
|
|
segments = max(dbase + dsize, fbase + fsize) >> IO_SEGMENT_SHIFT;
|
|
|
|
pr_debug("%s: iommu[%d]: segments: %lu\n",
|
|
__func__, iommu->nid, segments);
|
|
|
|
/* set up the segment table */
|
|
stab_size = segments * sizeof(unsigned long);
|
|
page = alloc_pages_node(iommu->nid, GFP_KERNEL, get_order(stab_size));
|
|
BUG_ON(!page);
|
|
iommu->stab = page_address(page);
|
|
memset(iommu->stab, 0, stab_size);
|
|
}
|
|
|
|
static unsigned long *cell_iommu_alloc_ptab(struct cbe_iommu *iommu,
|
|
unsigned long base, unsigned long size, unsigned long gap_base,
|
|
unsigned long gap_size, unsigned long page_shift)
|
|
{
|
|
struct page *page;
|
|
int i;
|
|
unsigned long reg, segments, pages_per_segment, ptab_size,
|
|
n_pte_pages, start_seg, *ptab;
|
|
|
|
start_seg = base >> IO_SEGMENT_SHIFT;
|
|
segments = size >> IO_SEGMENT_SHIFT;
|
|
pages_per_segment = 1ull << IO_PAGENO_BITS(page_shift);
|
|
/* PTEs for each segment must start on a 4K boundary */
|
|
pages_per_segment = max(pages_per_segment,
|
|
(1 << 12) / sizeof(unsigned long));
|
|
|
|
ptab_size = segments * pages_per_segment * sizeof(unsigned long);
|
|
pr_debug("%s: iommu[%d]: ptab_size: %lu, order: %d\n", __func__,
|
|
iommu->nid, ptab_size, get_order(ptab_size));
|
|
page = alloc_pages_node(iommu->nid, GFP_KERNEL, get_order(ptab_size));
|
|
BUG_ON(!page);
|
|
|
|
ptab = page_address(page);
|
|
memset(ptab, 0, ptab_size);
|
|
|
|
/* number of 4K pages needed for a page table */
|
|
n_pte_pages = (pages_per_segment * sizeof(unsigned long)) >> 12;
|
|
|
|
pr_debug("%s: iommu[%d]: stab at %p, ptab at %p, n_pte_pages: %lu\n",
|
|
__func__, iommu->nid, iommu->stab, ptab,
|
|
n_pte_pages);
|
|
|
|
/* initialise the STEs */
|
|
reg = IOSTE_V | ((n_pte_pages - 1) << 5);
|
|
|
|
switch (page_shift) {
|
|
case 12: reg |= IOSTE_PS_4K; break;
|
|
case 16: reg |= IOSTE_PS_64K; break;
|
|
case 20: reg |= IOSTE_PS_1M; break;
|
|
case 24: reg |= IOSTE_PS_16M; break;
|
|
default: BUG();
|
|
}
|
|
|
|
gap_base = gap_base >> IO_SEGMENT_SHIFT;
|
|
gap_size = gap_size >> IO_SEGMENT_SHIFT;
|
|
|
|
pr_debug("Setting up IOMMU stab:\n");
|
|
for (i = start_seg; i < (start_seg + segments); i++) {
|
|
if (i >= gap_base && i < (gap_base + gap_size)) {
|
|
pr_debug("\toverlap at %d, skipping\n", i);
|
|
continue;
|
|
}
|
|
iommu->stab[i] = reg | (__pa(ptab) + (n_pte_pages << 12) *
|
|
(i - start_seg));
|
|
pr_debug("\t[%d] 0x%016lx\n", i, iommu->stab[i]);
|
|
}
|
|
|
|
return ptab;
|
|
}
|
|
|
|
static void cell_iommu_enable_hardware(struct cbe_iommu *iommu)
|
|
{
|
|
int ret;
|
|
unsigned long reg, xlate_base;
|
|
unsigned int virq;
|
|
|
|
if (cell_iommu_find_ioc(iommu->nid, &xlate_base))
|
|
panic("%s: missing IOC register mappings for node %d\n",
|
|
__func__, iommu->nid);
|
|
|
|
iommu->xlate_regs = ioremap(xlate_base, IOC_Reg_Size);
|
|
iommu->cmd_regs = iommu->xlate_regs + IOC_IOCmd_Offset;
|
|
|
|
/* ensure that the STEs have updated */
|
|
mb();
|
|
|
|
/* setup interrupts for the iommu. */
|
|
reg = in_be64(iommu->xlate_regs + IOC_IO_ExcpStat);
|
|
out_be64(iommu->xlate_regs + IOC_IO_ExcpStat,
|
|
reg & ~IOC_IO_ExcpStat_V);
|
|
out_be64(iommu->xlate_regs + IOC_IO_ExcpMask,
|
|
IOC_IO_ExcpMask_PFE | IOC_IO_ExcpMask_SFE);
|
|
|
|
virq = irq_create_mapping(NULL,
|
|
IIC_IRQ_IOEX_ATI | (iommu->nid << IIC_IRQ_NODE_SHIFT));
|
|
BUG_ON(!virq);
|
|
|
|
ret = request_irq(virq, ioc_interrupt, 0, iommu->name, iommu);
|
|
BUG_ON(ret);
|
|
|
|
/* set the IOC segment table origin register (and turn on the iommu) */
|
|
reg = IOC_IOST_Origin_E | __pa(iommu->stab) | IOC_IOST_Origin_HW;
|
|
out_be64(iommu->xlate_regs + IOC_IOST_Origin, reg);
|
|
in_be64(iommu->xlate_regs + IOC_IOST_Origin);
|
|
|
|
/* turn on IO translation */
|
|
reg = in_be64(iommu->cmd_regs + IOC_IOCmd_Cfg) | IOC_IOCmd_Cfg_TE;
|
|
out_be64(iommu->cmd_regs + IOC_IOCmd_Cfg, reg);
|
|
}
|
|
|
|
static void cell_iommu_setup_hardware(struct cbe_iommu *iommu,
|
|
unsigned long base, unsigned long size)
|
|
{
|
|
cell_iommu_setup_stab(iommu, base, size, 0, 0);
|
|
iommu->ptab = cell_iommu_alloc_ptab(iommu, base, size, 0, 0,
|
|
IOMMU_PAGE_SHIFT_4K);
|
|
cell_iommu_enable_hardware(iommu);
|
|
}
|
|
|
|
#if 0/* Unused for now */
|
|
static struct iommu_window *find_window(struct cbe_iommu *iommu,
|
|
unsigned long offset, unsigned long size)
|
|
{
|
|
struct iommu_window *window;
|
|
|
|
/* todo: check for overlapping (but not equal) windows) */
|
|
|
|
list_for_each_entry(window, &(iommu->windows), list) {
|
|
if (window->offset == offset && window->size == size)
|
|
return window;
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
#endif
|
|
|
|
static inline u32 cell_iommu_get_ioid(struct device_node *np)
|
|
{
|
|
const u32 *ioid;
|
|
|
|
ioid = of_get_property(np, "ioid", NULL);
|
|
if (ioid == NULL) {
|
|
printk(KERN_WARNING "iommu: missing ioid for %pOF using 0\n",
|
|
np);
|
|
return 0;
|
|
}
|
|
|
|
return *ioid;
|
|
}
|
|
|
|
static struct iommu_table_ops cell_iommu_ops = {
|
|
.set = tce_build_cell,
|
|
.clear = tce_free_cell
|
|
};
|
|
|
|
static struct iommu_window * __init
|
|
cell_iommu_setup_window(struct cbe_iommu *iommu, struct device_node *np,
|
|
unsigned long offset, unsigned long size,
|
|
unsigned long pte_offset)
|
|
{
|
|
struct iommu_window *window;
|
|
struct page *page;
|
|
u32 ioid;
|
|
|
|
ioid = cell_iommu_get_ioid(np);
|
|
|
|
window = kzalloc_node(sizeof(*window), GFP_KERNEL, iommu->nid);
|
|
BUG_ON(window == NULL);
|
|
|
|
window->offset = offset;
|
|
window->size = size;
|
|
window->ioid = ioid;
|
|
window->iommu = iommu;
|
|
|
|
window->table.it_blocksize = 16;
|
|
window->table.it_base = (unsigned long)iommu->ptab;
|
|
window->table.it_index = iommu->nid;
|
|
window->table.it_page_shift = IOMMU_PAGE_SHIFT_4K;
|
|
window->table.it_offset =
|
|
(offset >> window->table.it_page_shift) + pte_offset;
|
|
window->table.it_size = size >> window->table.it_page_shift;
|
|
window->table.it_ops = &cell_iommu_ops;
|
|
|
|
iommu_init_table(&window->table, iommu->nid, 0, 0);
|
|
|
|
pr_debug("\tioid %d\n", window->ioid);
|
|
pr_debug("\tblocksize %ld\n", window->table.it_blocksize);
|
|
pr_debug("\tbase 0x%016lx\n", window->table.it_base);
|
|
pr_debug("\toffset 0x%lx\n", window->table.it_offset);
|
|
pr_debug("\tsize %ld\n", window->table.it_size);
|
|
|
|
list_add(&window->list, &iommu->windows);
|
|
|
|
if (offset != 0)
|
|
return window;
|
|
|
|
/* We need to map and reserve the first IOMMU page since it's used
|
|
* by the spider workaround. In theory, we only need to do that when
|
|
* running on spider but it doesn't really matter.
|
|
*
|
|
* This code also assumes that we have a window that starts at 0,
|
|
* which is the case on all spider based blades.
|
|
*/
|
|
page = alloc_pages_node(iommu->nid, GFP_KERNEL, 0);
|
|
BUG_ON(!page);
|
|
iommu->pad_page = page_address(page);
|
|
clear_page(iommu->pad_page);
|
|
|
|
__set_bit(0, window->table.it_map);
|
|
tce_build_cell(&window->table, window->table.it_offset, 1,
|
|
(unsigned long)iommu->pad_page, DMA_TO_DEVICE, 0);
|
|
|
|
return window;
|
|
}
|
|
|
|
static struct cbe_iommu *cell_iommu_for_node(int nid)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < cbe_nr_iommus; i++)
|
|
if (iommus[i].nid == nid)
|
|
return &iommus[i];
|
|
return NULL;
|
|
}
|
|
|
|
static unsigned long cell_dma_nommu_offset;
|
|
|
|
static unsigned long dma_iommu_fixed_base;
|
|
static bool cell_iommu_enabled;
|
|
|
|
/* iommu_fixed_is_weak is set if booted with iommu_fixed=weak */
|
|
bool iommu_fixed_is_weak;
|
|
|
|
static struct iommu_table *cell_get_iommu_table(struct device *dev)
|
|
{
|
|
struct iommu_window *window;
|
|
struct cbe_iommu *iommu;
|
|
|
|
/* Current implementation uses the first window available in that
|
|
* node's iommu. We -might- do something smarter later though it may
|
|
* never be necessary
|
|
*/
|
|
iommu = cell_iommu_for_node(dev_to_node(dev));
|
|
if (iommu == NULL || list_empty(&iommu->windows)) {
|
|
dev_err(dev, "iommu: missing iommu for %pOF (node %d)\n",
|
|
dev->of_node, dev_to_node(dev));
|
|
return NULL;
|
|
}
|
|
window = list_entry(iommu->windows.next, struct iommu_window, list);
|
|
|
|
return &window->table;
|
|
}
|
|
|
|
static u64 cell_iommu_get_fixed_address(struct device *dev);
|
|
|
|
static void cell_dma_dev_setup(struct device *dev)
|
|
{
|
|
if (cell_iommu_enabled) {
|
|
u64 addr = cell_iommu_get_fixed_address(dev);
|
|
|
|
if (addr != OF_BAD_ADDR)
|
|
dev->archdata.dma_offset = addr + dma_iommu_fixed_base;
|
|
set_iommu_table_base(dev, cell_get_iommu_table(dev));
|
|
} else {
|
|
dev->archdata.dma_offset = cell_dma_nommu_offset;
|
|
}
|
|
}
|
|
|
|
static void cell_pci_dma_dev_setup(struct pci_dev *dev)
|
|
{
|
|
cell_dma_dev_setup(&dev->dev);
|
|
}
|
|
|
|
static int cell_of_bus_notify(struct notifier_block *nb, unsigned long action,
|
|
void *data)
|
|
{
|
|
struct device *dev = data;
|
|
|
|
/* We are only intereted in device addition */
|
|
if (action != BUS_NOTIFY_ADD_DEVICE)
|
|
return 0;
|
|
|
|
if (cell_iommu_enabled)
|
|
dev->dma_ops = &dma_iommu_ops;
|
|
cell_dma_dev_setup(dev);
|
|
return 0;
|
|
}
|
|
|
|
static struct notifier_block cell_of_bus_notifier = {
|
|
.notifier_call = cell_of_bus_notify
|
|
};
|
|
|
|
static int __init cell_iommu_get_window(struct device_node *np,
|
|
unsigned long *base,
|
|
unsigned long *size)
|
|
{
|
|
const __be32 *dma_window;
|
|
unsigned long index;
|
|
|
|
/* Use ibm,dma-window if available, else, hard code ! */
|
|
dma_window = of_get_property(np, "ibm,dma-window", NULL);
|
|
if (dma_window == NULL) {
|
|
*base = 0;
|
|
*size = 0x80000000u;
|
|
return -ENODEV;
|
|
}
|
|
|
|
of_parse_dma_window(np, dma_window, &index, base, size);
|
|
return 0;
|
|
}
|
|
|
|
static struct cbe_iommu * __init cell_iommu_alloc(struct device_node *np)
|
|
{
|
|
struct cbe_iommu *iommu;
|
|
int nid, i;
|
|
|
|
/* Get node ID */
|
|
nid = of_node_to_nid(np);
|
|
if (nid < 0) {
|
|
printk(KERN_ERR "iommu: failed to get node for %pOF\n",
|
|
np);
|
|
return NULL;
|
|
}
|
|
pr_debug("iommu: setting up iommu for node %d (%pOF)\n",
|
|
nid, np);
|
|
|
|
/* XXX todo: If we can have multiple windows on the same IOMMU, which
|
|
* isn't the case today, we probably want here to check whether the
|
|
* iommu for that node is already setup.
|
|
* However, there might be issue with getting the size right so let's
|
|
* ignore that for now. We might want to completely get rid of the
|
|
* multiple window support since the cell iommu supports per-page ioids
|
|
*/
|
|
|
|
if (cbe_nr_iommus >= NR_IOMMUS) {
|
|
printk(KERN_ERR "iommu: too many IOMMUs detected ! (%pOF)\n",
|
|
np);
|
|
return NULL;
|
|
}
|
|
|
|
/* Init base fields */
|
|
i = cbe_nr_iommus++;
|
|
iommu = &iommus[i];
|
|
iommu->stab = NULL;
|
|
iommu->nid = nid;
|
|
snprintf(iommu->name, sizeof(iommu->name), "iommu%d", i);
|
|
INIT_LIST_HEAD(&iommu->windows);
|
|
|
|
return iommu;
|
|
}
|
|
|
|
static void __init cell_iommu_init_one(struct device_node *np,
|
|
unsigned long offset)
|
|
{
|
|
struct cbe_iommu *iommu;
|
|
unsigned long base, size;
|
|
|
|
iommu = cell_iommu_alloc(np);
|
|
if (!iommu)
|
|
return;
|
|
|
|
/* Obtain a window for it */
|
|
cell_iommu_get_window(np, &base, &size);
|
|
|
|
pr_debug("\ttranslating window 0x%lx...0x%lx\n",
|
|
base, base + size - 1);
|
|
|
|
/* Initialize the hardware */
|
|
cell_iommu_setup_hardware(iommu, base, size);
|
|
|
|
/* Setup the iommu_table */
|
|
cell_iommu_setup_window(iommu, np, base, size,
|
|
offset >> IOMMU_PAGE_SHIFT_4K);
|
|
}
|
|
|
|
static void __init cell_disable_iommus(void)
|
|
{
|
|
int node;
|
|
unsigned long base, val;
|
|
void __iomem *xregs, *cregs;
|
|
|
|
/* Make sure IOC translation is disabled on all nodes */
|
|
for_each_online_node(node) {
|
|
if (cell_iommu_find_ioc(node, &base))
|
|
continue;
|
|
xregs = ioremap(base, IOC_Reg_Size);
|
|
if (xregs == NULL)
|
|
continue;
|
|
cregs = xregs + IOC_IOCmd_Offset;
|
|
|
|
pr_debug("iommu: cleaning up iommu on node %d\n", node);
|
|
|
|
out_be64(xregs + IOC_IOST_Origin, 0);
|
|
(void)in_be64(xregs + IOC_IOST_Origin);
|
|
val = in_be64(cregs + IOC_IOCmd_Cfg);
|
|
val &= ~IOC_IOCmd_Cfg_TE;
|
|
out_be64(cregs + IOC_IOCmd_Cfg, val);
|
|
(void)in_be64(cregs + IOC_IOCmd_Cfg);
|
|
|
|
iounmap(xregs);
|
|
}
|
|
}
|
|
|
|
static int __init cell_iommu_init_disabled(void)
|
|
{
|
|
struct device_node *np = NULL;
|
|
unsigned long base = 0, size;
|
|
|
|
/* When no iommu is present, we use direct DMA ops */
|
|
|
|
/* First make sure all IOC translation is turned off */
|
|
cell_disable_iommus();
|
|
|
|
/* If we have no Axon, we set up the spider DMA magic offset */
|
|
if (of_find_node_by_name(NULL, "axon") == NULL)
|
|
cell_dma_nommu_offset = SPIDER_DMA_OFFSET;
|
|
|
|
/* Now we need to check to see where the memory is mapped
|
|
* in PCI space. We assume that all busses use the same dma
|
|
* window which is always the case so far on Cell, thus we
|
|
* pick up the first pci-internal node we can find and check
|
|
* the DMA window from there.
|
|
*/
|
|
for_each_node_by_name(np, "axon") {
|
|
if (np->parent == NULL || np->parent->parent != NULL)
|
|
continue;
|
|
if (cell_iommu_get_window(np, &base, &size) == 0)
|
|
break;
|
|
}
|
|
if (np == NULL) {
|
|
for_each_node_by_name(np, "pci-internal") {
|
|
if (np->parent == NULL || np->parent->parent != NULL)
|
|
continue;
|
|
if (cell_iommu_get_window(np, &base, &size) == 0)
|
|
break;
|
|
}
|
|
}
|
|
of_node_put(np);
|
|
|
|
/* If we found a DMA window, we check if it's big enough to enclose
|
|
* all of physical memory. If not, we force enable IOMMU
|
|
*/
|
|
if (np && size < memblock_end_of_DRAM()) {
|
|
printk(KERN_WARNING "iommu: force-enabled, dma window"
|
|
" (%ldMB) smaller than total memory (%lldMB)\n",
|
|
size >> 20, memblock_end_of_DRAM() >> 20);
|
|
return -ENODEV;
|
|
}
|
|
|
|
cell_dma_nommu_offset += base;
|
|
|
|
if (cell_dma_nommu_offset != 0)
|
|
cell_pci_controller_ops.dma_dev_setup = cell_pci_dma_dev_setup;
|
|
|
|
printk("iommu: disabled, direct DMA offset is 0x%lx\n",
|
|
cell_dma_nommu_offset);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Fixed IOMMU mapping support
|
|
*
|
|
* This code adds support for setting up a fixed IOMMU mapping on certain
|
|
* cell machines. For 64-bit devices this avoids the performance overhead of
|
|
* mapping and unmapping pages at runtime. 32-bit devices are unable to use
|
|
* the fixed mapping.
|
|
*
|
|
* The fixed mapping is established at boot, and maps all of physical memory
|
|
* 1:1 into device space at some offset. On machines with < 30 GB of memory
|
|
* we setup the fixed mapping immediately above the normal IOMMU window.
|
|
*
|
|
* For example a machine with 4GB of memory would end up with the normal
|
|
* IOMMU window from 0-2GB and the fixed mapping window from 2GB to 6GB. In
|
|
* this case a 64-bit device wishing to DMA to 1GB would be told to DMA to
|
|
* 3GB, plus any offset required by firmware. The firmware offset is encoded
|
|
* in the "dma-ranges" property.
|
|
*
|
|
* On machines with 30GB or more of memory, we are unable to place the fixed
|
|
* mapping above the normal IOMMU window as we would run out of address space.
|
|
* Instead we move the normal IOMMU window to coincide with the hash page
|
|
* table, this region does not need to be part of the fixed mapping as no
|
|
* device should ever be DMA'ing to it. We then setup the fixed mapping
|
|
* from 0 to 32GB.
|
|
*/
|
|
|
|
static u64 cell_iommu_get_fixed_address(struct device *dev)
|
|
{
|
|
u64 cpu_addr, size, best_size, dev_addr = OF_BAD_ADDR;
|
|
struct device_node *np;
|
|
const u32 *ranges = NULL;
|
|
int i, len, best, naddr, nsize, pna, range_size;
|
|
|
|
/* We can be called for platform devices that have no of_node */
|
|
np = of_node_get(dev->of_node);
|
|
if (!np)
|
|
goto out;
|
|
|
|
while (1) {
|
|
naddr = of_n_addr_cells(np);
|
|
nsize = of_n_size_cells(np);
|
|
np = of_get_next_parent(np);
|
|
if (!np)
|
|
break;
|
|
|
|
ranges = of_get_property(np, "dma-ranges", &len);
|
|
|
|
/* Ignore empty ranges, they imply no translation required */
|
|
if (ranges && len > 0)
|
|
break;
|
|
}
|
|
|
|
if (!ranges) {
|
|
dev_dbg(dev, "iommu: no dma-ranges found\n");
|
|
goto out;
|
|
}
|
|
|
|
len /= sizeof(u32);
|
|
|
|
pna = of_n_addr_cells(np);
|
|
range_size = naddr + nsize + pna;
|
|
|
|
/* dma-ranges format:
|
|
* child addr : naddr cells
|
|
* parent addr : pna cells
|
|
* size : nsize cells
|
|
*/
|
|
for (i = 0, best = -1, best_size = 0; i < len; i += range_size) {
|
|
cpu_addr = of_translate_dma_address(np, ranges + i + naddr);
|
|
size = of_read_number(ranges + i + naddr + pna, nsize);
|
|
|
|
if (cpu_addr == 0 && size > best_size) {
|
|
best = i;
|
|
best_size = size;
|
|
}
|
|
}
|
|
|
|
if (best >= 0) {
|
|
dev_addr = of_read_number(ranges + best, naddr);
|
|
} else
|
|
dev_dbg(dev, "iommu: no suitable range found!\n");
|
|
|
|
out:
|
|
of_node_put(np);
|
|
|
|
return dev_addr;
|
|
}
|
|
|
|
static bool cell_pci_iommu_bypass_supported(struct pci_dev *pdev, u64 mask)
|
|
{
|
|
return mask == DMA_BIT_MASK(64) &&
|
|
cell_iommu_get_fixed_address(&pdev->dev) != OF_BAD_ADDR;
|
|
}
|
|
|
|
static void insert_16M_pte(unsigned long addr, unsigned long *ptab,
|
|
unsigned long base_pte)
|
|
{
|
|
unsigned long segment, offset;
|
|
|
|
segment = addr >> IO_SEGMENT_SHIFT;
|
|
offset = (addr >> 24) - (segment << IO_PAGENO_BITS(24));
|
|
ptab = ptab + (segment * (1 << 12) / sizeof(unsigned long));
|
|
|
|
pr_debug("iommu: addr %lx ptab %p segment %lx offset %lx\n",
|
|
addr, ptab, segment, offset);
|
|
|
|
ptab[offset] = base_pte | (__pa(addr) & CBE_IOPTE_RPN_Mask);
|
|
}
|
|
|
|
static void cell_iommu_setup_fixed_ptab(struct cbe_iommu *iommu,
|
|
struct device_node *np, unsigned long dbase, unsigned long dsize,
|
|
unsigned long fbase, unsigned long fsize)
|
|
{
|
|
unsigned long base_pte, uaddr, ioaddr, *ptab;
|
|
|
|
ptab = cell_iommu_alloc_ptab(iommu, fbase, fsize, dbase, dsize, 24);
|
|
|
|
dma_iommu_fixed_base = fbase;
|
|
|
|
pr_debug("iommu: mapping 0x%lx pages from 0x%lx\n", fsize, fbase);
|
|
|
|
base_pte = CBE_IOPTE_PP_W | CBE_IOPTE_PP_R | CBE_IOPTE_M |
|
|
(cell_iommu_get_ioid(np) & CBE_IOPTE_IOID_Mask);
|
|
|
|
if (iommu_fixed_is_weak)
|
|
pr_info("IOMMU: Using weak ordering for fixed mapping\n");
|
|
else {
|
|
pr_info("IOMMU: Using strong ordering for fixed mapping\n");
|
|
base_pte |= CBE_IOPTE_SO_RW;
|
|
}
|
|
|
|
for (uaddr = 0; uaddr < fsize; uaddr += (1 << 24)) {
|
|
/* Don't touch the dynamic region */
|
|
ioaddr = uaddr + fbase;
|
|
if (ioaddr >= dbase && ioaddr < (dbase + dsize)) {
|
|
pr_debug("iommu: fixed/dynamic overlap, skipping\n");
|
|
continue;
|
|
}
|
|
|
|
insert_16M_pte(uaddr, ptab, base_pte);
|
|
}
|
|
|
|
mb();
|
|
}
|
|
|
|
static int __init cell_iommu_fixed_mapping_init(void)
|
|
{
|
|
unsigned long dbase, dsize, fbase, fsize, hbase, hend;
|
|
struct cbe_iommu *iommu;
|
|
struct device_node *np;
|
|
|
|
/* The fixed mapping is only supported on axon machines */
|
|
np = of_find_node_by_name(NULL, "axon");
|
|
of_node_put(np);
|
|
|
|
if (!np) {
|
|
pr_debug("iommu: fixed mapping disabled, no axons found\n");
|
|
return -1;
|
|
}
|
|
|
|
/* We must have dma-ranges properties for fixed mapping to work */
|
|
np = of_find_node_with_property(NULL, "dma-ranges");
|
|
of_node_put(np);
|
|
|
|
if (!np) {
|
|
pr_debug("iommu: no dma-ranges found, no fixed mapping\n");
|
|
return -1;
|
|
}
|
|
|
|
/* The default setup is to have the fixed mapping sit after the
|
|
* dynamic region, so find the top of the largest IOMMU window
|
|
* on any axon, then add the size of RAM and that's our max value.
|
|
* If that is > 32GB we have to do other shennanigans.
|
|
*/
|
|
fbase = 0;
|
|
for_each_node_by_name(np, "axon") {
|
|
cell_iommu_get_window(np, &dbase, &dsize);
|
|
fbase = max(fbase, dbase + dsize);
|
|
}
|
|
|
|
fbase = _ALIGN_UP(fbase, 1 << IO_SEGMENT_SHIFT);
|
|
fsize = memblock_phys_mem_size();
|
|
|
|
if ((fbase + fsize) <= 0x800000000ul)
|
|
hbase = 0; /* use the device tree window */
|
|
else {
|
|
/* If we're over 32 GB we need to cheat. We can't map all of
|
|
* RAM with the fixed mapping, and also fit the dynamic
|
|
* region. So try to place the dynamic region where the hash
|
|
* table sits, drivers never need to DMA to it, we don't
|
|
* need a fixed mapping for that area.
|
|
*/
|
|
if (!htab_address) {
|
|
pr_debug("iommu: htab is NULL, on LPAR? Huh?\n");
|
|
return -1;
|
|
}
|
|
hbase = __pa(htab_address);
|
|
hend = hbase + htab_size_bytes;
|
|
|
|
/* The window must start and end on a segment boundary */
|
|
if ((hbase != _ALIGN_UP(hbase, 1 << IO_SEGMENT_SHIFT)) ||
|
|
(hend != _ALIGN_UP(hend, 1 << IO_SEGMENT_SHIFT))) {
|
|
pr_debug("iommu: hash window not segment aligned\n");
|
|
return -1;
|
|
}
|
|
|
|
/* Check the hash window fits inside the real DMA window */
|
|
for_each_node_by_name(np, "axon") {
|
|
cell_iommu_get_window(np, &dbase, &dsize);
|
|
|
|
if (hbase < dbase || (hend > (dbase + dsize))) {
|
|
pr_debug("iommu: hash window doesn't fit in"
|
|
"real DMA window\n");
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
fbase = 0;
|
|
}
|
|
|
|
/* Setup the dynamic regions */
|
|
for_each_node_by_name(np, "axon") {
|
|
iommu = cell_iommu_alloc(np);
|
|
BUG_ON(!iommu);
|
|
|
|
if (hbase == 0)
|
|
cell_iommu_get_window(np, &dbase, &dsize);
|
|
else {
|
|
dbase = hbase;
|
|
dsize = htab_size_bytes;
|
|
}
|
|
|
|
printk(KERN_DEBUG "iommu: node %d, dynamic window 0x%lx-0x%lx "
|
|
"fixed window 0x%lx-0x%lx\n", iommu->nid, dbase,
|
|
dbase + dsize, fbase, fbase + fsize);
|
|
|
|
cell_iommu_setup_stab(iommu, dbase, dsize, fbase, fsize);
|
|
iommu->ptab = cell_iommu_alloc_ptab(iommu, dbase, dsize, 0, 0,
|
|
IOMMU_PAGE_SHIFT_4K);
|
|
cell_iommu_setup_fixed_ptab(iommu, np, dbase, dsize,
|
|
fbase, fsize);
|
|
cell_iommu_enable_hardware(iommu);
|
|
cell_iommu_setup_window(iommu, np, dbase, dsize, 0);
|
|
}
|
|
|
|
cell_pci_controller_ops.iommu_bypass_supported =
|
|
cell_pci_iommu_bypass_supported;
|
|
return 0;
|
|
}
|
|
|
|
static int iommu_fixed_disabled;
|
|
|
|
static int __init setup_iommu_fixed(char *str)
|
|
{
|
|
struct device_node *pciep;
|
|
|
|
if (strcmp(str, "off") == 0)
|
|
iommu_fixed_disabled = 1;
|
|
|
|
/* If we can find a pcie-endpoint in the device tree assume that
|
|
* we're on a triblade or a CAB so by default the fixed mapping
|
|
* should be set to be weakly ordered; but only if the boot
|
|
* option WASN'T set for strong ordering
|
|
*/
|
|
pciep = of_find_node_by_type(NULL, "pcie-endpoint");
|
|
|
|
if (strcmp(str, "weak") == 0 || (pciep && strcmp(str, "strong") != 0))
|
|
iommu_fixed_is_weak = true;
|
|
|
|
of_node_put(pciep);
|
|
|
|
return 1;
|
|
}
|
|
__setup("iommu_fixed=", setup_iommu_fixed);
|
|
|
|
static int __init cell_iommu_init(void)
|
|
{
|
|
struct device_node *np;
|
|
|
|
/* If IOMMU is disabled or we have little enough RAM to not need
|
|
* to enable it, we setup a direct mapping.
|
|
*
|
|
* Note: should we make sure we have the IOMMU actually disabled ?
|
|
*/
|
|
if (iommu_is_off ||
|
|
(!iommu_force_on && memblock_end_of_DRAM() <= 0x80000000ull))
|
|
if (cell_iommu_init_disabled() == 0)
|
|
goto bail;
|
|
|
|
/* Setup various callbacks */
|
|
cell_pci_controller_ops.dma_dev_setup = cell_pci_dma_dev_setup;
|
|
|
|
if (!iommu_fixed_disabled && cell_iommu_fixed_mapping_init() == 0)
|
|
goto done;
|
|
|
|
/* Create an iommu for each /axon node. */
|
|
for_each_node_by_name(np, "axon") {
|
|
if (np->parent == NULL || np->parent->parent != NULL)
|
|
continue;
|
|
cell_iommu_init_one(np, 0);
|
|
}
|
|
|
|
/* Create an iommu for each toplevel /pci-internal node for
|
|
* old hardware/firmware
|
|
*/
|
|
for_each_node_by_name(np, "pci-internal") {
|
|
if (np->parent == NULL || np->parent->parent != NULL)
|
|
continue;
|
|
cell_iommu_init_one(np, SPIDER_DMA_OFFSET);
|
|
}
|
|
done:
|
|
/* Setup default PCI iommu ops */
|
|
set_pci_dma_ops(&dma_iommu_ops);
|
|
cell_iommu_enabled = true;
|
|
bail:
|
|
/* Register callbacks on OF platform device addition/removal
|
|
* to handle linking them to the right DMA operations
|
|
*/
|
|
bus_register_notifier(&platform_bus_type, &cell_of_bus_notifier);
|
|
|
|
return 0;
|
|
}
|
|
machine_arch_initcall(cell, cell_iommu_init);
|