korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-03 00:54:09 +08:00
Code Issues Packages Projects Releases Wiki Activity
166353bd75
linux/arch/arm/mach-omap2/control.h
Paul Walmsley 166353bd75 OMAP3: control/PRCM: add omap3_ctrl_write_boot_mode() 
Get rid of the open-coded scratchpad write in mach-omap2/prcm.c and
replace it with an actual API, omap3_ctrl_write_boot_mode().  While
there, get rid of the gratuitous omap_writel().

There's not much documentation available for what should wind up in
the scratchpad here, so more documentation would be appreciated.
Also, at some point, we should formalize our treatment of the scratchpad;
right now, accesses to the scratchpad are not well-documented.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com>
Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-12-21 20:01:21 -07:00

377 lines
16 KiB
C
Raw Blame History

/*
* arch/arm/mach-omap2/control.h
*
* OMAP2/3/4 System Control Module definitions
*
* Copyright (C) 2007-2010 Texas Instruments, Inc.
* Copyright (C) 2007-2008, 2010 Nokia Corporation
*
* Written by Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation.
*/
#ifndef __ARCH_ARM_MACH_OMAP2_CONTROL_H
#define __ARCH_ARM_MACH_OMAP2_CONTROL_H
#include <mach/io.h>
#include <mach/ctrl_module_core_44xx.h>
#include <mach/ctrl_module_wkup_44xx.h>
#include <mach/ctrl_module_pad_core_44xx.h>
#include <mach/ctrl_module_pad_wkup_44xx.h>
#ifndef __ASSEMBLY__
#define OMAP242X_CTRL_REGADDR(reg) \
OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
#define OMAP243X_CTRL_REGADDR(reg) \
OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
#define OMAP343X_CTRL_REGADDR(reg) \
OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
#else
#define OMAP242X_CTRL_REGADDR(reg) \
OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
#define OMAP243X_CTRL_REGADDR(reg) \
OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
#define OMAP343X_CTRL_REGADDR(reg) \
OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
#endif /* __ASSEMBLY__ */
/*
* As elsewhere, the "OMAP2_" prefix indicates that the macro is valid for
* OMAP24XX and OMAP34XX.
*/
/* Control submodule offsets */
#define OMAP2_CONTROL_INTERFACE 0x000
#define OMAP2_CONTROL_PADCONFS 0x030
#define OMAP2_CONTROL_GENERAL 0x270
#define OMAP343X_CONTROL_MEM_WKUP 0x600
#define OMAP343X_CONTROL_PADCONFS_WKUP 0xa00
#define OMAP343X_CONTROL_GENERAL_WKUP 0xa60
/* Control register offsets - read/write with omap_ctrl_{read,write}{bwl}() */
#define OMAP2_CONTROL_SYSCONFIG (OMAP2_CONTROL_INTERFACE + 0x10)
/* CONTROL_GENERAL register offsets common to OMAP2 & 3 */
#define OMAP2_CONTROL_DEVCONF0 (OMAP2_CONTROL_GENERAL + 0x0004)
#define OMAP2_CONTROL_MSUSPENDMUX_0 (OMAP2_CONTROL_GENERAL + 0x0020)
#define OMAP2_CONTROL_MSUSPENDMUX_1 (OMAP2_CONTROL_GENERAL + 0x0024)
#define OMAP2_CONTROL_MSUSPENDMUX_2 (OMAP2_CONTROL_GENERAL + 0x0028)
#define OMAP2_CONTROL_MSUSPENDMUX_3 (OMAP2_CONTROL_GENERAL + 0x002c)
#define OMAP2_CONTROL_MSUSPENDMUX_4 (OMAP2_CONTROL_GENERAL + 0x0030)
#define OMAP2_CONTROL_MSUSPENDMUX_5 (OMAP2_CONTROL_GENERAL + 0x0034)
#define OMAP2_CONTROL_SEC_CTRL (OMAP2_CONTROL_GENERAL + 0x0040)
#define OMAP2_CONTROL_RPUB_KEY_H_0 (OMAP2_CONTROL_GENERAL + 0x0090)
#define OMAP2_CONTROL_RPUB_KEY_H_1 (OMAP2_CONTROL_GENERAL + 0x0094)
#define OMAP2_CONTROL_RPUB_KEY_H_2 (OMAP2_CONTROL_GENERAL + 0x0098)
#define OMAP2_CONTROL_RPUB_KEY_H_3 (OMAP2_CONTROL_GENERAL + 0x009c)
/* 242x-only CONTROL_GENERAL register offsets */
#define OMAP242X_CONTROL_DEVCONF OMAP2_CONTROL_DEVCONF0 /* match TRM */
#define OMAP242X_CONTROL_OCM_RAM_PERM (OMAP2_CONTROL_GENERAL + 0x0068)
/* 243x-only CONTROL_GENERAL register offsets */
/* CONTROL_IVA2_BOOT{ADDR,MOD} are at the same place on 343x - noted below */
#define OMAP243X_CONTROL_DEVCONF1 (OMAP2_CONTROL_GENERAL + 0x0078)
#define OMAP243X_CONTROL_CSIRXFE (OMAP2_CONTROL_GENERAL + 0x007c)
#define OMAP243X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190)
#define OMAP243X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194)
#define OMAP243X_CONTROL_IVA2_GEMCFG (OMAP2_CONTROL_GENERAL + 0x0198)
#define OMAP243X_CONTROL_PBIAS_LITE (OMAP2_CONTROL_GENERAL + 0x0230)
/* 24xx-only CONTROL_GENERAL register offsets */
#define OMAP24XX_CONTROL_DEBOBS (OMAP2_CONTROL_GENERAL + 0x0000)
#define OMAP24XX_CONTROL_EMU_SUPPORT (OMAP2_CONTROL_GENERAL + 0x0008)
#define OMAP24XX_CONTROL_SEC_TEST (OMAP2_CONTROL_GENERAL + 0x0044)
#define OMAP24XX_CONTROL_PSA_CTRL (OMAP2_CONTROL_GENERAL + 0x0048)
#define OMAP24XX_CONTROL_PSA_CMD (OMAP2_CONTROL_GENERAL + 0x004c)
#define OMAP24XX_CONTROL_PSA_VALUE (OMAP2_CONTROL_GENERAL + 0x0050)
#define OMAP24XX_CONTROL_SEC_EMU (OMAP2_CONTROL_GENERAL + 0x0060)
#define OMAP24XX_CONTROL_SEC_TAP (OMAP2_CONTROL_GENERAL + 0x0064)
#define OMAP24XX_CONTROL_OCM_PUB_RAM_ADD (OMAP2_CONTROL_GENERAL + 0x006c)
#define OMAP24XX_CONTROL_EXT_SEC_RAM_START_ADD (OMAP2_CONTROL_GENERAL + 0x0070)
#define OMAP24XX_CONTROL_EXT_SEC_RAM_STOP_ADD (OMAP2_CONTROL_GENERAL + 0x0074)
#define OMAP24XX_CONTROL_SEC_STATUS (OMAP2_CONTROL_GENERAL + 0x0080)
#define OMAP24XX_CONTROL_SEC_ERR_STATUS (OMAP2_CONTROL_GENERAL + 0x0084)
#define OMAP24XX_CONTROL_STATUS (OMAP2_CONTROL_GENERAL + 0x0088)
#define OMAP24XX_CONTROL_GENERAL_PURPOSE_STATUS (OMAP2_CONTROL_GENERAL + 0x008c)
#define OMAP24XX_CONTROL_RAND_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00a0)
#define OMAP24XX_CONTROL_RAND_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00a4)
#define OMAP24XX_CONTROL_RAND_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00a8)
#define OMAP24XX_CONTROL_RAND_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00ac)
#define OMAP24XX_CONTROL_CUST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00b0)
#define OMAP24XX_CONTROL_CUST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00b4)
#define OMAP24XX_CONTROL_TEST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00c0)
#define OMAP24XX_CONTROL_TEST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00c4)
#define OMAP24XX_CONTROL_TEST_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00c8)
#define OMAP24XX_CONTROL_TEST_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00cc)
#define OMAP24XX_CONTROL_TEST_KEY_4 (OMAP2_CONTROL_GENERAL + 0x00d0)
#define OMAP24XX_CONTROL_TEST_KEY_5 (OMAP2_CONTROL_GENERAL + 0x00d4)
#define OMAP24XX_CONTROL_TEST_KEY_6 (OMAP2_CONTROL_GENERAL + 0x00d8)
#define OMAP24XX_CONTROL_TEST_KEY_7 (OMAP2_CONTROL_GENERAL + 0x00dc)
#define OMAP24XX_CONTROL_TEST_KEY_8 (OMAP2_CONTROL_GENERAL + 0x00e0)
#define OMAP24XX_CONTROL_TEST_KEY_9 (OMAP2_CONTROL_GENERAL + 0x00e4)
#define OMAP343X_CONTROL_PADCONF_SYSNIRQ (OMAP2_CONTROL_INTERFACE + 0x01b0)
/* 34xx-only CONTROL_GENERAL register offsets */
#define OMAP343X_CONTROL_PADCONF_OFF (OMAP2_CONTROL_GENERAL + 0x0000)
#define OMAP343X_CONTROL_MEM_DFTRW0 (OMAP2_CONTROL_GENERAL + 0x0008)
#define OMAP343X_CONTROL_MEM_DFTRW1 (OMAP2_CONTROL_GENERAL + 0x000c)
#define OMAP343X_CONTROL_DEVCONF1 (OMAP2_CONTROL_GENERAL + 0x0068)
#define OMAP343X_CONTROL_CSIRXFE (OMAP2_CONTROL_GENERAL + 0x006c)
#define OMAP343X_CONTROL_SEC_STATUS (OMAP2_CONTROL_GENERAL + 0x0070)
#define OMAP343X_CONTROL_SEC_ERR_STATUS (OMAP2_CONTROL_GENERAL + 0x0074)
#define OMAP343X_CONTROL_SEC_ERR_STATUS_DEBUG (OMAP2_CONTROL_GENERAL + 0x0078)
#define OMAP343X_CONTROL_STATUS (OMAP2_CONTROL_GENERAL + 0x0080)
#define OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS (OMAP2_CONTROL_GENERAL + 0x0084)
#define OMAP343X_CONTROL_RPUB_KEY_H_4 (OMAP2_CONTROL_GENERAL + 0x00a0)
#define OMAP343X_CONTROL_RAND_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00a8)
#define OMAP343X_CONTROL_RAND_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00ac)
#define OMAP343X_CONTROL_RAND_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00b0)
#define OMAP343X_CONTROL_RAND_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00b4)
#define OMAP343X_CONTROL_TEST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00c8)
#define OMAP343X_CONTROL_TEST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00cc)
#define OMAP343X_CONTROL_TEST_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00d0)
#define OMAP343X_CONTROL_TEST_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00d4)
#define OMAP343X_CONTROL_TEST_KEY_4 (OMAP2_CONTROL_GENERAL + 0x00d8)
#define OMAP343X_CONTROL_TEST_KEY_5 (OMAP2_CONTROL_GENERAL + 0x00dc)
#define OMAP343X_CONTROL_TEST_KEY_6 (OMAP2_CONTROL_GENERAL + 0x00e0)
#define OMAP343X_CONTROL_TEST_KEY_7 (OMAP2_CONTROL_GENERAL + 0x00e4)
#define OMAP343X_CONTROL_TEST_KEY_8 (OMAP2_CONTROL_GENERAL + 0x00e8)
#define OMAP343X_CONTROL_TEST_KEY_9 (OMAP2_CONTROL_GENERAL + 0x00ec)
#define OMAP343X_CONTROL_TEST_KEY_10 (OMAP2_CONTROL_GENERAL + 0x00f0)
#define OMAP343X_CONTROL_TEST_KEY_11 (OMAP2_CONTROL_GENERAL + 0x00f4)
#define OMAP343X_CONTROL_TEST_KEY_12 (OMAP2_CONTROL_GENERAL + 0x00f8)
#define OMAP343X_CONTROL_TEST_KEY_13 (OMAP2_CONTROL_GENERAL + 0x00fc)
#define OMAP343X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190)
#define OMAP343X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194)
#define OMAP343X_CONTROL_DEBOBS(i) (OMAP2_CONTROL_GENERAL + 0x01B0 \
+ ((i) >> 1) * 4 + (!((i) & 1)) * 2)
#define OMAP343X_CONTROL_PROG_IO0 (OMAP2_CONTROL_GENERAL + 0x01D4)
#define OMAP343X_CONTROL_PROG_IO1 (OMAP2_CONTROL_GENERAL + 0x01D8)
#define OMAP343X_CONTROL_DSS_DPLL_SPREADING (OMAP2_CONTROL_GENERAL + 0x01E0)
#define OMAP343X_CONTROL_CORE_DPLL_SPREADING (OMAP2_CONTROL_GENERAL + 0x01E4)
#define OMAP343X_CONTROL_PER_DPLL_SPREADING (OMAP2_CONTROL_GENERAL + 0x01E8)
#define OMAP343X_CONTROL_USBHOST_DPLL_SPREADING (OMAP2_CONTROL_GENERAL + 0x01EC)
#define OMAP343X_CONTROL_PBIAS_LITE (OMAP2_CONTROL_GENERAL + 0x02B0)
#define OMAP343X_CONTROL_TEMP_SENSOR (OMAP2_CONTROL_GENERAL + 0x02B4)
#define OMAP343X_CONTROL_SRAMLDO4 (OMAP2_CONTROL_GENERAL + 0x02B8)
#define OMAP343X_CONTROL_SRAMLDO5 (OMAP2_CONTROL_GENERAL + 0x02C0)
#define OMAP343X_CONTROL_CSI (OMAP2_CONTROL_GENERAL + 0x02C4)
/* AM35XX only CONTROL_GENERAL register offsets */
#define AM35XX_CONTROL_MSUSPENDMUX_6 (OMAP2_CONTROL_GENERAL + 0x0038)
#define AM35XX_CONTROL_DEVCONF2 (OMAP2_CONTROL_GENERAL + 0x0310)
#define AM35XX_CONTROL_DEVCONF3 (OMAP2_CONTROL_GENERAL + 0x0314)
#define AM35XX_CONTROL_CBA_PRIORITY (OMAP2_CONTROL_GENERAL + 0x0320)
#define AM35XX_CONTROL_LVL_INTR_CLEAR (OMAP2_CONTROL_GENERAL + 0x0324)
#define AM35XX_CONTROL_IP_SW_RESET (OMAP2_CONTROL_GENERAL + 0x0328)
#define AM35XX_CONTROL_IPSS_CLK_CTRL (OMAP2_CONTROL_GENERAL + 0x032C)
/* 34xx PADCONF register offsets */
#define OMAP343X_PADCONF_ETK(i) (OMAP2_CONTROL_PADCONFS + 0x5a8 + \
(i)*2)
#define OMAP343X_PADCONF_ETK_CLK OMAP343X_PADCONF_ETK(0)
#define OMAP343X_PADCONF_ETK_CTL OMAP343X_PADCONF_ETK(1)
#define OMAP343X_PADCONF_ETK_D0 OMAP343X_PADCONF_ETK(2)
#define OMAP343X_PADCONF_ETK_D1 OMAP343X_PADCONF_ETK(3)
#define OMAP343X_PADCONF_ETK_D2 OMAP343X_PADCONF_ETK(4)
#define OMAP343X_PADCONF_ETK_D3 OMAP343X_PADCONF_ETK(5)
#define OMAP343X_PADCONF_ETK_D4 OMAP343X_PADCONF_ETK(6)
#define OMAP343X_PADCONF_ETK_D5 OMAP343X_PADCONF_ETK(7)
#define OMAP343X_PADCONF_ETK_D6 OMAP343X_PADCONF_ETK(8)
#define OMAP343X_PADCONF_ETK_D7 OMAP343X_PADCONF_ETK(9)
#define OMAP343X_PADCONF_ETK_D8 OMAP343X_PADCONF_ETK(10)
#define OMAP343X_PADCONF_ETK_D9 OMAP343X_PADCONF_ETK(11)
#define OMAP343X_PADCONF_ETK_D10 OMAP343X_PADCONF_ETK(12)
#define OMAP343X_PADCONF_ETK_D11 OMAP343X_PADCONF_ETK(13)
#define OMAP343X_PADCONF_ETK_D12 OMAP343X_PADCONF_ETK(14)
#define OMAP343X_PADCONF_ETK_D13 OMAP343X_PADCONF_ETK(15)
#define OMAP343X_PADCONF_ETK_D14 OMAP343X_PADCONF_ETK(16)
#define OMAP343X_PADCONF_ETK_D15 OMAP343X_PADCONF_ETK(17)
/* 34xx GENERAL_WKUP regist offsets */
#define OMAP343X_CONTROL_WKUP_DEBOBSMUX(i) (OMAP343X_CONTROL_GENERAL_WKUP + \
0x008 + (i))
#define OMAP343X_CONTROL_WKUP_DEBOBS0 (OMAP343X_CONTROL_GENERAL_WKUP + 0x008)
#define OMAP343X_CONTROL_WKUP_DEBOBS1 (OMAP343X_CONTROL_GENERAL_WKUP + 0x00C)
#define OMAP343X_CONTROL_WKUP_DEBOBS2 (OMAP343X_CONTROL_GENERAL_WKUP + 0x010)
#define OMAP343X_CONTROL_WKUP_DEBOBS3 (OMAP343X_CONTROL_GENERAL_WKUP + 0x014)
#define OMAP343X_CONTROL_WKUP_DEBOBS4 (OMAP343X_CONTROL_GENERAL_WKUP + 0x018)
/* 36xx-only RTA - Retention till Accesss control registers and bits */
#define OMAP36XX_CONTROL_MEM_RTA_CTRL 0x40C
#define OMAP36XX_RTA_DISABLE 0x0
/* 34xx D2D idle-related pins, handled by PM core */
#define OMAP3_PADCONF_SAD2D_MSTANDBY 0x250
#define OMAP3_PADCONF_SAD2D_IDLEACK 0x254
/*
* REVISIT: This list of registers is not comprehensive - there are more
* that should be added.
*/
/*
* Control module register bit defines - these should eventually go into
* their own regbits file. Some of these will be complicated, depending
* on the device type (general-purpose, emulator, test, secure, bad, other)
* and the security mode (secure, non-secure, don't care)
*/
/* CONTROL_DEVCONF0 bits */
#define OMAP2_MMCSDIO1ADPCLKISEL (1 << 24) /* MMC1 loop back clock */
#define OMAP24XX_USBSTANDBYCTRL (1 << 15)
#define OMAP2_MCBSP2_CLKS_MASK (1 << 6)
#define OMAP2_MCBSP1_FSR_MASK (1 << 4)
#define OMAP2_MCBSP1_CLKR_MASK (1 << 3)
#define OMAP2_MCBSP1_CLKS_MASK (1 << 2)
/* CONTROL_DEVCONF1 bits */
#define OMAP243X_MMC1_ACTIVE_OVERWRITE (1 << 31)
#define OMAP2_MMCSDIO2ADPCLKISEL (1 << 6) /* MMC2 loop back clock */
#define OMAP2_MCBSP5_CLKS_MASK (1 << 4) /* > 242x */
#define OMAP2_MCBSP4_CLKS_MASK (1 << 2) /* > 242x */
#define OMAP2_MCBSP3_CLKS_MASK (1 << 0) /* > 242x */
/* CONTROL_STATUS bits */
#define OMAP2_DEVICETYPE_MASK (0x7 << 8)
#define OMAP2_SYSBOOT_5_MASK (1 << 5)
#define OMAP2_SYSBOOT_4_MASK (1 << 4)
#define OMAP2_SYSBOOT_3_MASK (1 << 3)
#define OMAP2_SYSBOOT_2_MASK (1 << 2)
#define OMAP2_SYSBOOT_1_MASK (1 << 1)
#define OMAP2_SYSBOOT_0_MASK (1 << 0)
/* CONTROL_PBIAS_LITE bits */
#define OMAP343X_PBIASLITESUPPLY_HIGH1 (1 << 15)
#define OMAP343X_PBIASLITEVMODEERROR1 (1 << 11)
#define OMAP343X_PBIASSPEEDCTRL1 (1 << 10)
#define OMAP343X_PBIASLITEPWRDNZ1 (1 << 9)
#define OMAP343X_PBIASLITEVMODE1 (1 << 8)
#define OMAP343X_PBIASLITESUPPLY_HIGH0 (1 << 7)
#define OMAP343X_PBIASLITEVMODEERROR0 (1 << 3)
#define OMAP2_PBIASSPEEDCTRL0 (1 << 2)
#define OMAP2_PBIASLITEPWRDNZ0 (1 << 1)
#define OMAP2_PBIASLITEVMODE0 (1 << 0)
/* CONTROL_PROG_IO1 bits */
#define OMAP3630_PRG_SDMMC1_SPEEDCTRL (1 << 20)
/* CONTROL_IVA2_BOOTMOD bits */
#define OMAP3_IVA2_BOOTMOD_SHIFT 0
#define OMAP3_IVA2_BOOTMOD_MASK (0xf << 0)
#define OMAP3_IVA2_BOOTMOD_IDLE (0x1 << 0)
/* CONTROL_PADCONF_X bits */
#define OMAP3_PADCONF_WAKEUPEVENT0 (1 << 15)
#define OMAP3_PADCONF_WAKEUPENABLE0 (1 << 14)
#define OMAP343X_SCRATCHPAD_ROM (OMAP343X_CTRL_BASE + 0x860)
#define OMAP343X_SCRATCHPAD (OMAP343X_CTRL_BASE + 0x910)
#define OMAP343X_SCRATCHPAD_ROM_OFFSET 0x19C
#define OMAP343X_SCRATCHPAD_REGADDR(reg) OMAP2_L4_IO_ADDRESS(\
OMAP343X_SCRATCHPAD + reg)
/* AM35XX_CONTROL_IPSS_CLK_CTRL bits */
#define AM35XX_USBOTG_VBUSP_CLK_SHIFT 0
#define AM35XX_CPGMAC_VBUSP_CLK_SHIFT 1
#define AM35XX_VPFE_VBUSP_CLK_SHIFT 2
#define AM35XX_HECC_VBUSP_CLK_SHIFT 3
#define AM35XX_USBOTG_FCLK_SHIFT 8
#define AM35XX_CPGMAC_FCLK_SHIFT 9
#define AM35XX_VPFE_FCLK_SHIFT 10
/*AM35XX CONTROL_LVL_INTR_CLEAR bits*/
#define AM35XX_CPGMAC_C0_MISC_PULSE_CLR BIT(0)
#define AM35XX_CPGMAC_C0_RX_PULSE_CLR BIT(1)
#define AM35XX_CPGMAC_C0_RX_THRESH_CLR BIT(2)
#define AM35XX_CPGMAC_C0_TX_PULSE_CLR BIT(3)
#define AM35XX_USBOTGSS_INT_CLR BIT(4)
#define AM35XX_VPFE_CCDC_VD0_INT_CLR BIT(5)
#define AM35XX_VPFE_CCDC_VD1_INT_CLR BIT(6)
#define AM35XX_VPFE_CCDC_VD2_INT_CLR BIT(7)
/*AM35XX CONTROL_IP_SW_RESET bits*/
#define AM35XX_USBOTGSS_SW_RST BIT(0)
#define AM35XX_CPGMACSS_SW_RST BIT(1)
#define AM35XX_VPFE_VBUSP_SW_RST BIT(2)
#define AM35XX_HECC_SW_RST BIT(3)
#define AM35XX_VPFE_PCLK_SW_RST BIT(4)
/*
* CONTROL OMAP STATUS register to identify OMAP3 features
*/
#define OMAP3_CONTROL_OMAP_STATUS 0x044c
#define OMAP3_SGX_SHIFT 13
#define OMAP3_SGX_MASK (3 << OMAP3_SGX_SHIFT)
#define FEAT_SGX_FULL 0
#define FEAT_SGX_HALF 1
#define FEAT_SGX_NONE 2
#define OMAP3_IVA_SHIFT 12
#define OMAP3_IVA_MASK (1 << OMAP3_SGX_SHIFT)
#define FEAT_IVA 0
#define FEAT_IVA_NONE 1
#define OMAP3_L2CACHE_SHIFT 10
#define OMAP3_L2CACHE_MASK (3 << OMAP3_L2CACHE_SHIFT)
#define FEAT_L2CACHE_NONE 0
#define FEAT_L2CACHE_64KB 1
#define FEAT_L2CACHE_128KB 2
#define FEAT_L2CACHE_256KB 3
#define OMAP3_ISP_SHIFT 5
#define OMAP3_ISP_MASK (1 << OMAP3_ISP_SHIFT)
#define FEAT_ISP 0
#define FEAT_ISP_NONE 1
#define OMAP3_NEON_SHIFT 4
#define OMAP3_NEON_MASK (1 << OMAP3_NEON_SHIFT)
#define FEAT_NEON 0
#define FEAT_NEON_NONE 1
#ifndef __ASSEMBLY__
#ifdef CONFIG_ARCH_OMAP2PLUS
extern void __iomem *omap_ctrl_base_get(void);
extern u8 omap_ctrl_readb(u16 offset);
extern u16 omap_ctrl_readw(u16 offset);
extern u32 omap_ctrl_readl(u16 offset);
extern u32 omap4_ctrl_pad_readl(u16 offset);
extern void omap_ctrl_writeb(u8 val, u16 offset);
extern void omap_ctrl_writew(u16 val, u16 offset);
extern void omap_ctrl_writel(u32 val, u16 offset);
extern void omap4_ctrl_pad_writel(u32 val, u16 offset);
extern void omap3_save_scratchpad_contents(void);
extern void omap3_clear_scratchpad_contents(void);
extern u32 *get_restore_pointer(void);
extern u32 *get_es3_restore_pointer(void);
extern u32 *get_omap3630_restore_pointer(void);
extern u32 omap3_arm_context[128];
extern void omap3_control_save_context(void);
extern void omap3_control_restore_context(void);
extern void omap3_ctrl_write_boot_mode(u8 bootmode);
extern void omap3630_ctrl_disable_rta(void);
#else
#define omap_ctrl_base_get() 0
#define omap_ctrl_readb(x) 0
#define omap_ctrl_readw(x) 0
#define omap_ctrl_readl(x) 0
#define omap4_ctrl_pad_readl(x) 0
#define omap_ctrl_writeb(x, y) WARN_ON(1)
#define omap_ctrl_writew(x, y) WARN_ON(1)
#define omap_ctrl_writel(x, y) WARN_ON(1)
#define omap4_ctrl_pad_writel(x, y) WARN_ON(1)
#endif
#endif /* __ASSEMBLY__ */
#endif /* __ARCH_ARM_MACH_OMAP2_CONTROL_H */
Reference in New Issue View Git Blame Copy Permalink