mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-14 07:44:21 +08:00
c47d254117
A recent refactoring to use the func member in struct function_desc
missed converting one uses of name in keembay_build_functions(),
resulting in a build failure:
drivers/pinctrl/pinctrl-keembay.c: In function 'keembay_build_functions':
drivers/pinctrl/pinctrl-keembay.c:1630:35: error: 'struct function_desc' has no member named 'name'
1630 | if (!fdesc->name) {
| ^~
Perform the same conversion to resolve the build error.
Fixes: 73ee52205e
("pinctrl: keembay: Convert to use func member")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240611-pinctrl-keembay-fix-func-conversion-v1-1-3197f2ded3f7@kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406131133.WwdetfBL-lkp@intel.com/
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
1717 lines
51 KiB
C
1717 lines
51 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/* Copyright (C) 2020 Intel Corporation */
|
|
|
|
#include <linux/bitfield.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/pinctrl/pinconf.h>
|
|
#include <linux/pinctrl/pinconf-generic.h>
|
|
#include <linux/pinctrl/pinctrl.h>
|
|
#include <linux/pinctrl/pinmux.h>
|
|
|
|
#include <linux/platform_device.h>
|
|
|
|
#include "core.h"
|
|
#include "pinmux.h"
|
|
|
|
/* GPIO data registers' offsets */
|
|
#define KEEMBAY_GPIO_DATA_OUT 0x000
|
|
#define KEEMBAY_GPIO_DATA_IN 0x020
|
|
#define KEEMBAY_GPIO_DATA_IN_RAW 0x040
|
|
#define KEEMBAY_GPIO_DATA_HIGH 0x060
|
|
#define KEEMBAY_GPIO_DATA_LOW 0x080
|
|
|
|
/* GPIO Interrupt and mode registers' offsets */
|
|
#define KEEMBAY_GPIO_INT_CFG 0x000
|
|
#define KEEMBAY_GPIO_MODE 0x070
|
|
|
|
/* GPIO mode register bit fields */
|
|
#define KEEMBAY_GPIO_MODE_PULLUP_MASK GENMASK(13, 12)
|
|
#define KEEMBAY_GPIO_MODE_DRIVE_MASK GENMASK(8, 7)
|
|
#define KEEMBAY_GPIO_MODE_INV_MASK GENMASK(5, 4)
|
|
#define KEEMBAY_GPIO_MODE_SELECT_MASK GENMASK(2, 0)
|
|
#define KEEMBAY_GPIO_MODE_DIR_OVR BIT(15)
|
|
#define KEEMBAY_GPIO_MODE_REN BIT(11)
|
|
#define KEEMBAY_GPIO_MODE_SCHMITT_EN BIT(10)
|
|
#define KEEMBAY_GPIO_MODE_SLEW_RATE BIT(9)
|
|
#define KEEMBAY_GPIO_IRQ_ENABLE BIT(7)
|
|
#define KEEMBAY_GPIO_MODE_DIR BIT(3)
|
|
#define KEEMBAY_GPIO_MODE_DEFAULT 0x7
|
|
#define KEEMBAY_GPIO_MODE_INV_VAL 0x3
|
|
|
|
#define KEEMBAY_GPIO_DISABLE 0
|
|
#define KEEMBAY_GPIO_PULL_UP 1
|
|
#define KEEMBAY_GPIO_PULL_DOWN 2
|
|
#define KEEMBAY_GPIO_BUS_HOLD 3
|
|
#define KEEMBAY_GPIO_NUM_IRQ 8
|
|
#define KEEMBAY_GPIO_MAX_PER_IRQ 4
|
|
#define KEEMBAY_GPIO_MAX_PER_REG 32
|
|
#define KEEMBAY_GPIO_MIN_STRENGTH 2
|
|
#define KEEMBAY_GPIO_MAX_STRENGTH 12
|
|
#define KEEMBAY_GPIO_SENSE_LOW (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_EDGE_FALLING)
|
|
|
|
/* GPIO reg address calculation */
|
|
#define KEEMBAY_GPIO_REG_OFFSET(pin) ((pin) * 4)
|
|
|
|
/**
|
|
* struct keembay_mux_desc - Mux properties of each GPIO pin
|
|
* @mode: Pin mode when operating in this function
|
|
* @name: Pin function name
|
|
*/
|
|
struct keembay_mux_desc {
|
|
u8 mode;
|
|
const char *name;
|
|
};
|
|
|
|
#define KEEMBAY_PIN_DESC(pin_number, pin_name, ...) { \
|
|
.number = pin_number, \
|
|
.name = pin_name, \
|
|
.drv_data = &(struct keembay_mux_desc[]) { \
|
|
__VA_ARGS__, { } }, \
|
|
} \
|
|
|
|
#define KEEMBAY_MUX(pin_mode, pin_function) { \
|
|
.mode = pin_mode, \
|
|
.name = pin_function, \
|
|
} \
|
|
|
|
/**
|
|
* struct keembay_gpio_irq - Config of each GPIO Interrupt sources
|
|
* @source: Interrupt source number (0 - 7)
|
|
* @line: Actual Interrupt line number
|
|
* @pins: Array of GPIO pins using this Interrupt line
|
|
* @trigger: Interrupt trigger type for this line
|
|
* @num_share: Number of pins currently using this Interrupt line
|
|
*/
|
|
struct keembay_gpio_irq {
|
|
unsigned int source;
|
|
unsigned int line;
|
|
unsigned int pins[KEEMBAY_GPIO_MAX_PER_IRQ];
|
|
unsigned int trigger;
|
|
unsigned int num_share;
|
|
};
|
|
|
|
/**
|
|
* struct keembay_pinctrl - Intel Keembay pinctrl structure
|
|
* @pctrl: Pointer to the pin controller device
|
|
* @base0: First register base address
|
|
* @base1: Second register base address
|
|
* @dev: Pointer to the device structure
|
|
* @chip: GPIO chip used by this pin controller
|
|
* @soc: Pin control configuration data based on SoC
|
|
* @lock: Spinlock to protect various gpio config register access
|
|
* @ngroups: Number of pin groups available
|
|
* @nfuncs: Number of pin functions available
|
|
* @npins: Number of GPIO pins available
|
|
* @irq: Store Interrupt source
|
|
* @max_gpios_level_type: Store max level trigger type
|
|
* @max_gpios_edge_type: Store max edge trigger type
|
|
*/
|
|
struct keembay_pinctrl {
|
|
struct pinctrl_dev *pctrl;
|
|
void __iomem *base0;
|
|
void __iomem *base1;
|
|
struct device *dev;
|
|
struct gpio_chip chip;
|
|
const struct keembay_pin_soc *soc;
|
|
raw_spinlock_t lock;
|
|
unsigned int ngroups;
|
|
unsigned int nfuncs;
|
|
unsigned int npins;
|
|
struct keembay_gpio_irq irq[KEEMBAY_GPIO_NUM_IRQ];
|
|
int max_gpios_level_type;
|
|
int max_gpios_edge_type;
|
|
};
|
|
|
|
/**
|
|
* struct keembay_pin_soc - Pin control config data based on SoC
|
|
* @pins: Pin description structure
|
|
*/
|
|
struct keembay_pin_soc {
|
|
const struct pinctrl_pin_desc *pins;
|
|
};
|
|
|
|
static const struct pinctrl_pin_desc keembay_pins[] = {
|
|
KEEMBAY_PIN_DESC(0, "GPIO0",
|
|
KEEMBAY_MUX(0x0, "I2S0_M0"),
|
|
KEEMBAY_MUX(0x1, "SD0_M1"),
|
|
KEEMBAY_MUX(0x2, "SLVDS0_M2"),
|
|
KEEMBAY_MUX(0x3, "I2C0_M3"),
|
|
KEEMBAY_MUX(0x4, "CAM_M4"),
|
|
KEEMBAY_MUX(0x5, "ETH_M5"),
|
|
KEEMBAY_MUX(0x6, "LCD_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(1, "GPIO1",
|
|
KEEMBAY_MUX(0x0, "I2S0_M0"),
|
|
KEEMBAY_MUX(0x1, "SD0_M1"),
|
|
KEEMBAY_MUX(0x2, "SLVDS0_M2"),
|
|
KEEMBAY_MUX(0x3, "I2C0_M3"),
|
|
KEEMBAY_MUX(0x4, "CAM_M4"),
|
|
KEEMBAY_MUX(0x5, "ETH_M5"),
|
|
KEEMBAY_MUX(0x6, "LCD_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(2, "GPIO2",
|
|
KEEMBAY_MUX(0x0, "I2S0_M0"),
|
|
KEEMBAY_MUX(0x1, "I2S0_M1"),
|
|
KEEMBAY_MUX(0x2, "SLVDS0_M2"),
|
|
KEEMBAY_MUX(0x3, "I2C1_M3"),
|
|
KEEMBAY_MUX(0x4, "CAM_M4"),
|
|
KEEMBAY_MUX(0x5, "ETH_M5"),
|
|
KEEMBAY_MUX(0x6, "LCD_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(3, "GPIO3",
|
|
KEEMBAY_MUX(0x0, "I2S0_M0"),
|
|
KEEMBAY_MUX(0x1, "I2S0_M1"),
|
|
KEEMBAY_MUX(0x2, "SLVDS0_M2"),
|
|
KEEMBAY_MUX(0x3, "I2C1_M3"),
|
|
KEEMBAY_MUX(0x4, "CAM_M4"),
|
|
KEEMBAY_MUX(0x5, "ETH_M5"),
|
|
KEEMBAY_MUX(0x6, "LCD_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(4, "GPIO4",
|
|
KEEMBAY_MUX(0x0, "I2S0_M0"),
|
|
KEEMBAY_MUX(0x1, "I2S0_M1"),
|
|
KEEMBAY_MUX(0x2, "SLVDS0_M2"),
|
|
KEEMBAY_MUX(0x3, "I2C2_M3"),
|
|
KEEMBAY_MUX(0x4, "CAM_M4"),
|
|
KEEMBAY_MUX(0x5, "ETH_M5"),
|
|
KEEMBAY_MUX(0x6, "LCD_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(5, "GPIO5",
|
|
KEEMBAY_MUX(0x0, "I2S0_M0"),
|
|
KEEMBAY_MUX(0x1, "I2S0_M1"),
|
|
KEEMBAY_MUX(0x2, "SLVDS0_M2"),
|
|
KEEMBAY_MUX(0x3, "I2C2_M3"),
|
|
KEEMBAY_MUX(0x4, "CAM_M4"),
|
|
KEEMBAY_MUX(0x5, "ETH_M5"),
|
|
KEEMBAY_MUX(0x6, "LCD_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(6, "GPIO6",
|
|
KEEMBAY_MUX(0x0, "I2S1_M0"),
|
|
KEEMBAY_MUX(0x1, "SD0_M1"),
|
|
KEEMBAY_MUX(0x2, "SLVDS0_M2"),
|
|
KEEMBAY_MUX(0x3, "I2C3_M3"),
|
|
KEEMBAY_MUX(0x4, "CAM_M4"),
|
|
KEEMBAY_MUX(0x5, "ETH_M5"),
|
|
KEEMBAY_MUX(0x6, "LCD_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(7, "GPIO7",
|
|
KEEMBAY_MUX(0x0, "I2S1_M0"),
|
|
KEEMBAY_MUX(0x1, "SD0_M1"),
|
|
KEEMBAY_MUX(0x2, "SLVDS0_M2"),
|
|
KEEMBAY_MUX(0x3, "I2C3_M3"),
|
|
KEEMBAY_MUX(0x4, "CAM_M4"),
|
|
KEEMBAY_MUX(0x5, "ETH_M5"),
|
|
KEEMBAY_MUX(0x6, "LCD_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(8, "GPIO8",
|
|
KEEMBAY_MUX(0x0, "I2S1_M0"),
|
|
KEEMBAY_MUX(0x1, "I2S1_M1"),
|
|
KEEMBAY_MUX(0x2, "SLVDS0_M2"),
|
|
KEEMBAY_MUX(0x3, "UART0_M3"),
|
|
KEEMBAY_MUX(0x4, "CAM_M4"),
|
|
KEEMBAY_MUX(0x5, "ETH_M5"),
|
|
KEEMBAY_MUX(0x6, "LCD_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(9, "GPIO9",
|
|
KEEMBAY_MUX(0x0, "I2S1_M0"),
|
|
KEEMBAY_MUX(0x1, "I2S1_M1"),
|
|
KEEMBAY_MUX(0x2, "PWM_M2"),
|
|
KEEMBAY_MUX(0x3, "UART0_M3"),
|
|
KEEMBAY_MUX(0x4, "CAM_M4"),
|
|
KEEMBAY_MUX(0x5, "ETH_M5"),
|
|
KEEMBAY_MUX(0x6, "LCD_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(10, "GPIO10",
|
|
KEEMBAY_MUX(0x0, "I2S2_M0"),
|
|
KEEMBAY_MUX(0x1, "SD0_M1"),
|
|
KEEMBAY_MUX(0x2, "PWM_M2"),
|
|
KEEMBAY_MUX(0x3, "UART0_M3"),
|
|
KEEMBAY_MUX(0x4, "CAM_M4"),
|
|
KEEMBAY_MUX(0x5, "ETH_M5"),
|
|
KEEMBAY_MUX(0x6, "LCD_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(11, "GPIO11",
|
|
KEEMBAY_MUX(0x0, "I2S2_M0"),
|
|
KEEMBAY_MUX(0x1, "SD0_M1"),
|
|
KEEMBAY_MUX(0x2, "PWM_M2"),
|
|
KEEMBAY_MUX(0x3, "UART0_M3"),
|
|
KEEMBAY_MUX(0x4, "CAM_M4"),
|
|
KEEMBAY_MUX(0x5, "ETH_M5"),
|
|
KEEMBAY_MUX(0x6, "LCD_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(12, "GPIO12",
|
|
KEEMBAY_MUX(0x0, "I2S2_M0"),
|
|
KEEMBAY_MUX(0x1, "I2S2_M1"),
|
|
KEEMBAY_MUX(0x2, "PWM_M2"),
|
|
KEEMBAY_MUX(0x3, "SPI0_M3"),
|
|
KEEMBAY_MUX(0x4, "CAM_M4"),
|
|
KEEMBAY_MUX(0x5, "ETH_M5"),
|
|
KEEMBAY_MUX(0x6, "LCD_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(13, "GPIO13",
|
|
KEEMBAY_MUX(0x0, "I2S2_M0"),
|
|
KEEMBAY_MUX(0x1, "I2S2_M1"),
|
|
KEEMBAY_MUX(0x2, "PWM_M2"),
|
|
KEEMBAY_MUX(0x3, "SPI0_M3"),
|
|
KEEMBAY_MUX(0x4, "CAM_M4"),
|
|
KEEMBAY_MUX(0x5, "ETH_M5"),
|
|
KEEMBAY_MUX(0x6, "LCD_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(14, "GPIO14",
|
|
KEEMBAY_MUX(0x0, "UART0_M0"),
|
|
KEEMBAY_MUX(0x1, "I2S3_M1"),
|
|
KEEMBAY_MUX(0x2, "PWM_M2"),
|
|
KEEMBAY_MUX(0x3, "SD1_M3"),
|
|
KEEMBAY_MUX(0x4, "CAM_M4"),
|
|
KEEMBAY_MUX(0x5, "ETH_M5"),
|
|
KEEMBAY_MUX(0x6, "LCD_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(15, "GPIO15",
|
|
KEEMBAY_MUX(0x0, "UART0_M0"),
|
|
KEEMBAY_MUX(0x1, "I2S3_M1"),
|
|
KEEMBAY_MUX(0x2, "UART0_M2"),
|
|
KEEMBAY_MUX(0x3, "SD1_M3"),
|
|
KEEMBAY_MUX(0x4, "CAM_M4"),
|
|
KEEMBAY_MUX(0x5, "SPI1_M5"),
|
|
KEEMBAY_MUX(0x6, "LCD_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(16, "GPIO16",
|
|
KEEMBAY_MUX(0x0, "UART0_M0"),
|
|
KEEMBAY_MUX(0x1, "I2S3_M1"),
|
|
KEEMBAY_MUX(0x2, "UART0_M2"),
|
|
KEEMBAY_MUX(0x3, "SD1_M3"),
|
|
KEEMBAY_MUX(0x4, "CAM_M4"),
|
|
KEEMBAY_MUX(0x5, "SPI1_M5"),
|
|
KEEMBAY_MUX(0x6, "LCD_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(17, "GPIO17",
|
|
KEEMBAY_MUX(0x0, "UART0_M0"),
|
|
KEEMBAY_MUX(0x1, "I2S3_M1"),
|
|
KEEMBAY_MUX(0x2, "I2S3_M2"),
|
|
KEEMBAY_MUX(0x3, "SD1_M3"),
|
|
KEEMBAY_MUX(0x4, "CAM_M4"),
|
|
KEEMBAY_MUX(0x5, "SPI1_M5"),
|
|
KEEMBAY_MUX(0x6, "LCD_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(18, "GPIO18",
|
|
KEEMBAY_MUX(0x0, "UART1_M0"),
|
|
KEEMBAY_MUX(0x1, "SPI0_M1"),
|
|
KEEMBAY_MUX(0x2, "I2S3_M2"),
|
|
KEEMBAY_MUX(0x3, "SD1_M3"),
|
|
KEEMBAY_MUX(0x4, "CAM_M4"),
|
|
KEEMBAY_MUX(0x5, "SPI1_M5"),
|
|
KEEMBAY_MUX(0x6, "LCD_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(19, "GPIO19",
|
|
KEEMBAY_MUX(0x0, "UART1_M0"),
|
|
KEEMBAY_MUX(0x1, "LCD_M1"),
|
|
KEEMBAY_MUX(0x2, "DEBUG_M2"),
|
|
KEEMBAY_MUX(0x3, "SD1_M3"),
|
|
KEEMBAY_MUX(0x4, "CAM_M4"),
|
|
KEEMBAY_MUX(0x5, "SPI1_M5"),
|
|
KEEMBAY_MUX(0x6, "LCD_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(20, "GPIO20",
|
|
KEEMBAY_MUX(0x0, "UART1_M0"),
|
|
KEEMBAY_MUX(0x1, "LCD_M1"),
|
|
KEEMBAY_MUX(0x2, "DEBUG_M2"),
|
|
KEEMBAY_MUX(0x3, "CPR_M3"),
|
|
KEEMBAY_MUX(0x4, "CAM_M4"),
|
|
KEEMBAY_MUX(0x5, "SPI1_M5"),
|
|
KEEMBAY_MUX(0x6, "SLVDS0_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(21, "GPIO21",
|
|
KEEMBAY_MUX(0x0, "UART1_M0"),
|
|
KEEMBAY_MUX(0x1, "LCD_M1"),
|
|
KEEMBAY_MUX(0x2, "DEBUG_M2"),
|
|
KEEMBAY_MUX(0x3, "CPR_M3"),
|
|
KEEMBAY_MUX(0x4, "CAM_M4"),
|
|
KEEMBAY_MUX(0x5, "I3C0_M5"),
|
|
KEEMBAY_MUX(0x6, "SLVDS0_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(22, "GPIO22",
|
|
KEEMBAY_MUX(0x0, "I2C0_M0"),
|
|
KEEMBAY_MUX(0x1, "UART2_M1"),
|
|
KEEMBAY_MUX(0x2, "DEBUG_M2"),
|
|
KEEMBAY_MUX(0x3, "CPR_M3"),
|
|
KEEMBAY_MUX(0x4, "CAM_M4"),
|
|
KEEMBAY_MUX(0x5, "I3C0_M5"),
|
|
KEEMBAY_MUX(0x6, "SLVDS0_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(23, "GPIO23",
|
|
KEEMBAY_MUX(0x0, "I2C0_M0"),
|
|
KEEMBAY_MUX(0x1, "UART2_M1"),
|
|
KEEMBAY_MUX(0x2, "DEBUG_M2"),
|
|
KEEMBAY_MUX(0x3, "CPR_M3"),
|
|
KEEMBAY_MUX(0x4, "CAM_M4"),
|
|
KEEMBAY_MUX(0x5, "I3C1_M5"),
|
|
KEEMBAY_MUX(0x6, "SLVDS0_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(24, "GPIO24",
|
|
KEEMBAY_MUX(0x0, "I2C1_M0"),
|
|
KEEMBAY_MUX(0x1, "UART2_M1"),
|
|
KEEMBAY_MUX(0x2, "DEBUG_M2"),
|
|
KEEMBAY_MUX(0x3, "CPR_M3"),
|
|
KEEMBAY_MUX(0x4, "CAM_M4"),
|
|
KEEMBAY_MUX(0x5, "I3C1_M5"),
|
|
KEEMBAY_MUX(0x6, "SLVDS0_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(25, "GPIO25",
|
|
KEEMBAY_MUX(0x0, "I2C1_M0"),
|
|
KEEMBAY_MUX(0x1, "UART2_M1"),
|
|
KEEMBAY_MUX(0x2, "SPI0_M2"),
|
|
KEEMBAY_MUX(0x3, "CPR_M3"),
|
|
KEEMBAY_MUX(0x4, "CAM_M4"),
|
|
KEEMBAY_MUX(0x5, "I3C2_M5"),
|
|
KEEMBAY_MUX(0x6, "SLVDS0_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(26, "GPIO26",
|
|
KEEMBAY_MUX(0x0, "SPI0_M0"),
|
|
KEEMBAY_MUX(0x1, "I2C2_M1"),
|
|
KEEMBAY_MUX(0x2, "UART0_M2"),
|
|
KEEMBAY_MUX(0x3, "DSU_M3"),
|
|
KEEMBAY_MUX(0x4, "CAM_M4"),
|
|
KEEMBAY_MUX(0x5, "I3C2_M5"),
|
|
KEEMBAY_MUX(0x6, "SLVDS0_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(27, "GPIO27",
|
|
KEEMBAY_MUX(0x0, "SPI0_M0"),
|
|
KEEMBAY_MUX(0x1, "I2C2_M1"),
|
|
KEEMBAY_MUX(0x2, "UART0_M2"),
|
|
KEEMBAY_MUX(0x3, "DSU_M3"),
|
|
KEEMBAY_MUX(0x4, "CAM_M4"),
|
|
KEEMBAY_MUX(0x5, "I3C0_M5"),
|
|
KEEMBAY_MUX(0x6, "SLVDS0_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(28, "GPIO28",
|
|
KEEMBAY_MUX(0x0, "SPI0_M0"),
|
|
KEEMBAY_MUX(0x1, "I2C3_M1"),
|
|
KEEMBAY_MUX(0x2, "UART0_M2"),
|
|
KEEMBAY_MUX(0x3, "PWM_M3"),
|
|
KEEMBAY_MUX(0x4, "CAM_M4"),
|
|
KEEMBAY_MUX(0x5, "I3C1_M5"),
|
|
KEEMBAY_MUX(0x6, "SLVDS0_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(29, "GPIO29",
|
|
KEEMBAY_MUX(0x0, "SPI0_M0"),
|
|
KEEMBAY_MUX(0x1, "I2C3_M1"),
|
|
KEEMBAY_MUX(0x2, "UART0_M2"),
|
|
KEEMBAY_MUX(0x3, "PWM_M3"),
|
|
KEEMBAY_MUX(0x4, "CAM_M4"),
|
|
KEEMBAY_MUX(0x5, "I3C2_M5"),
|
|
KEEMBAY_MUX(0x6, "SLVDS1_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(30, "GPIO30",
|
|
KEEMBAY_MUX(0x0, "SPI0_M0"),
|
|
KEEMBAY_MUX(0x1, "I2S0_M1"),
|
|
KEEMBAY_MUX(0x2, "I2C4_M2"),
|
|
KEEMBAY_MUX(0x3, "PWM_M3"),
|
|
KEEMBAY_MUX(0x4, "CAM_M4"),
|
|
KEEMBAY_MUX(0x5, "LCD_M5"),
|
|
KEEMBAY_MUX(0x6, "SLVDS1_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(31, "GPIO31",
|
|
KEEMBAY_MUX(0x0, "SPI0_M0"),
|
|
KEEMBAY_MUX(0x1, "I2S0_M1"),
|
|
KEEMBAY_MUX(0x2, "I2C4_M2"),
|
|
KEEMBAY_MUX(0x3, "PWM_M3"),
|
|
KEEMBAY_MUX(0x4, "CAM_M4"),
|
|
KEEMBAY_MUX(0x5, "UART1_M5"),
|
|
KEEMBAY_MUX(0x6, "SLVDS1_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(32, "GPIO32",
|
|
KEEMBAY_MUX(0x0, "SD0_M0"),
|
|
KEEMBAY_MUX(0x1, "SPI0_M1"),
|
|
KEEMBAY_MUX(0x2, "UART1_M2"),
|
|
KEEMBAY_MUX(0x3, "PWM_M3"),
|
|
KEEMBAY_MUX(0x4, "CAM_M4"),
|
|
KEEMBAY_MUX(0x5, "PCIE_M5"),
|
|
KEEMBAY_MUX(0x6, "SLVDS1_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(33, "GPIO33",
|
|
KEEMBAY_MUX(0x0, "SD0_M0"),
|
|
KEEMBAY_MUX(0x1, "SPI0_M1"),
|
|
KEEMBAY_MUX(0x2, "UART1_M2"),
|
|
KEEMBAY_MUX(0x3, "PWM_M3"),
|
|
KEEMBAY_MUX(0x4, "CAM_M4"),
|
|
KEEMBAY_MUX(0x5, "PCIE_M5"),
|
|
KEEMBAY_MUX(0x6, "SLVDS1_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(34, "GPIO34",
|
|
KEEMBAY_MUX(0x0, "SD0_M0"),
|
|
KEEMBAY_MUX(0x1, "SPI0_M1"),
|
|
KEEMBAY_MUX(0x2, "I2C0_M2"),
|
|
KEEMBAY_MUX(0x3, "UART1_M3"),
|
|
KEEMBAY_MUX(0x4, "CAM_M4"),
|
|
KEEMBAY_MUX(0x5, "I2S0_M5"),
|
|
KEEMBAY_MUX(0x6, "SLVDS1_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(35, "GPIO35",
|
|
KEEMBAY_MUX(0x0, "SD0_M0"),
|
|
KEEMBAY_MUX(0x1, "PCIE_M1"),
|
|
KEEMBAY_MUX(0x2, "I2C0_M2"),
|
|
KEEMBAY_MUX(0x3, "UART1_M3"),
|
|
KEEMBAY_MUX(0x4, "CAM_M4"),
|
|
KEEMBAY_MUX(0x5, "I2S0_M5"),
|
|
KEEMBAY_MUX(0x6, "SLVDS1_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(36, "GPIO36",
|
|
KEEMBAY_MUX(0x0, "SD0_M0"),
|
|
KEEMBAY_MUX(0x1, "SPI3_M1"),
|
|
KEEMBAY_MUX(0x2, "I2C1_M2"),
|
|
KEEMBAY_MUX(0x3, "DEBUG_M3"),
|
|
KEEMBAY_MUX(0x4, "CAM_M4"),
|
|
KEEMBAY_MUX(0x5, "I2S0_M5"),
|
|
KEEMBAY_MUX(0x6, "SLVDS1_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(37, "GPIO37",
|
|
KEEMBAY_MUX(0x0, "SD0_M0"),
|
|
KEEMBAY_MUX(0x1, "SPI3_M1"),
|
|
KEEMBAY_MUX(0x2, "I2C1_M2"),
|
|
KEEMBAY_MUX(0x3, "DEBUG_M3"),
|
|
KEEMBAY_MUX(0x4, "CAM_M4"),
|
|
KEEMBAY_MUX(0x5, "I2S0_M5"),
|
|
KEEMBAY_MUX(0x6, "SLVDS1_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(38, "GPIO38",
|
|
KEEMBAY_MUX(0x0, "I3C1_M0"),
|
|
KEEMBAY_MUX(0x1, "SPI3_M1"),
|
|
KEEMBAY_MUX(0x2, "UART3_M2"),
|
|
KEEMBAY_MUX(0x3, "DEBUG_M3"),
|
|
KEEMBAY_MUX(0x4, "CAM_M4"),
|
|
KEEMBAY_MUX(0x5, "LCD_M5"),
|
|
KEEMBAY_MUX(0x6, "I2C2_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(39, "GPIO39",
|
|
KEEMBAY_MUX(0x0, "I3C1_M0"),
|
|
KEEMBAY_MUX(0x1, "SPI3_M1"),
|
|
KEEMBAY_MUX(0x2, "UART3_M2"),
|
|
KEEMBAY_MUX(0x3, "DEBUG_M3"),
|
|
KEEMBAY_MUX(0x4, "CAM_M4"),
|
|
KEEMBAY_MUX(0x5, "LCD_M5"),
|
|
KEEMBAY_MUX(0x6, "I2C2_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(40, "GPIO40",
|
|
KEEMBAY_MUX(0x0, "I2S2_M0"),
|
|
KEEMBAY_MUX(0x1, "SPI3_M1"),
|
|
KEEMBAY_MUX(0x2, "UART3_M2"),
|
|
KEEMBAY_MUX(0x3, "DEBUG_M3"),
|
|
KEEMBAY_MUX(0x4, "CAM_M4"),
|
|
KEEMBAY_MUX(0x5, "LCD_M5"),
|
|
KEEMBAY_MUX(0x6, "I2C3_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(41, "GPIO41",
|
|
KEEMBAY_MUX(0x0, "ETH_M0"),
|
|
KEEMBAY_MUX(0x1, "SPI3_M1"),
|
|
KEEMBAY_MUX(0x2, "SPI3_M2"),
|
|
KEEMBAY_MUX(0x3, "DEBUG_M3"),
|
|
KEEMBAY_MUX(0x4, "CAM_M4"),
|
|
KEEMBAY_MUX(0x5, "LCD_M5"),
|
|
KEEMBAY_MUX(0x6, "I2C3_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(42, "GPIO42",
|
|
KEEMBAY_MUX(0x0, "ETH_M0"),
|
|
KEEMBAY_MUX(0x1, "SD1_M1"),
|
|
KEEMBAY_MUX(0x2, "SPI3_M2"),
|
|
KEEMBAY_MUX(0x3, "CPR_M3"),
|
|
KEEMBAY_MUX(0x4, "CAM_M4"),
|
|
KEEMBAY_MUX(0x5, "LCD_M5"),
|
|
KEEMBAY_MUX(0x6, "I2C4_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(43, "GPIO43",
|
|
KEEMBAY_MUX(0x0, "ETH_M0"),
|
|
KEEMBAY_MUX(0x1, "SD1_M1"),
|
|
KEEMBAY_MUX(0x2, "SPI3_M2"),
|
|
KEEMBAY_MUX(0x3, "CPR_M3"),
|
|
KEEMBAY_MUX(0x4, "I2S0_M4"),
|
|
KEEMBAY_MUX(0x5, "LCD_M5"),
|
|
KEEMBAY_MUX(0x6, "I2C4_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(44, "GPIO44",
|
|
KEEMBAY_MUX(0x0, "ETH_M0"),
|
|
KEEMBAY_MUX(0x1, "SD1_M1"),
|
|
KEEMBAY_MUX(0x2, "SPI0_M2"),
|
|
KEEMBAY_MUX(0x3, "CPR_M3"),
|
|
KEEMBAY_MUX(0x4, "I2S0_M4"),
|
|
KEEMBAY_MUX(0x5, "LCD_M5"),
|
|
KEEMBAY_MUX(0x6, "CAM_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(45, "GPIO45",
|
|
KEEMBAY_MUX(0x0, "ETH_M0"),
|
|
KEEMBAY_MUX(0x1, "SD1_M1"),
|
|
KEEMBAY_MUX(0x2, "SPI0_M2"),
|
|
KEEMBAY_MUX(0x3, "CPR_M3"),
|
|
KEEMBAY_MUX(0x4, "I2S0_M4"),
|
|
KEEMBAY_MUX(0x5, "LCD_M5"),
|
|
KEEMBAY_MUX(0x6, "CAM_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(46, "GPIO46",
|
|
KEEMBAY_MUX(0x0, "ETH_M0"),
|
|
KEEMBAY_MUX(0x1, "SD1_M1"),
|
|
KEEMBAY_MUX(0x2, "SPI0_M2"),
|
|
KEEMBAY_MUX(0x3, "TPIU_M3"),
|
|
KEEMBAY_MUX(0x4, "I2S0_M4"),
|
|
KEEMBAY_MUX(0x5, "LCD_M5"),
|
|
KEEMBAY_MUX(0x6, "CAM_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(47, "GPIO47",
|
|
KEEMBAY_MUX(0x0, "ETH_M0"),
|
|
KEEMBAY_MUX(0x1, "SD1_M1"),
|
|
KEEMBAY_MUX(0x2, "SPI0_M2"),
|
|
KEEMBAY_MUX(0x3, "TPIU_M3"),
|
|
KEEMBAY_MUX(0x4, "I2S0_M4"),
|
|
KEEMBAY_MUX(0x5, "LCD_M5"),
|
|
KEEMBAY_MUX(0x6, "CAM_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(48, "GPIO48",
|
|
KEEMBAY_MUX(0x0, "ETH_M0"),
|
|
KEEMBAY_MUX(0x1, "SPI2_M1"),
|
|
KEEMBAY_MUX(0x2, "UART2_M2"),
|
|
KEEMBAY_MUX(0x3, "TPIU_M3"),
|
|
KEEMBAY_MUX(0x4, "I2S0_M4"),
|
|
KEEMBAY_MUX(0x5, "LCD_M5"),
|
|
KEEMBAY_MUX(0x6, "CAM_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(49, "GPIO49",
|
|
KEEMBAY_MUX(0x0, "ETH_M0"),
|
|
KEEMBAY_MUX(0x1, "SPI2_M1"),
|
|
KEEMBAY_MUX(0x2, "UART2_M2"),
|
|
KEEMBAY_MUX(0x3, "TPIU_M3"),
|
|
KEEMBAY_MUX(0x4, "I2S1_M4"),
|
|
KEEMBAY_MUX(0x5, "LCD_M5"),
|
|
KEEMBAY_MUX(0x6, "CAM_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(50, "GPIO50",
|
|
KEEMBAY_MUX(0x0, "ETH_M0"),
|
|
KEEMBAY_MUX(0x1, "SPI2_M1"),
|
|
KEEMBAY_MUX(0x2, "UART2_M2"),
|
|
KEEMBAY_MUX(0x3, "TPIU_M3"),
|
|
KEEMBAY_MUX(0x4, "I2S1_M4"),
|
|
KEEMBAY_MUX(0x5, "LCD_M5"),
|
|
KEEMBAY_MUX(0x6, "CAM_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(51, "GPIO51",
|
|
KEEMBAY_MUX(0x0, "ETH_M0"),
|
|
KEEMBAY_MUX(0x1, "SPI2_M1"),
|
|
KEEMBAY_MUX(0x2, "UART2_M2"),
|
|
KEEMBAY_MUX(0x3, "TPIU_M3"),
|
|
KEEMBAY_MUX(0x4, "I2S1_M4"),
|
|
KEEMBAY_MUX(0x5, "LCD_M5"),
|
|
KEEMBAY_MUX(0x6, "CAM_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(52, "GPIO52",
|
|
KEEMBAY_MUX(0x0, "ETH_M0"),
|
|
KEEMBAY_MUX(0x1, "SPI2_M1"),
|
|
KEEMBAY_MUX(0x2, "SD0_M2"),
|
|
KEEMBAY_MUX(0x3, "TPIU_M3"),
|
|
KEEMBAY_MUX(0x4, "I2S1_M4"),
|
|
KEEMBAY_MUX(0x5, "LCD_M5"),
|
|
KEEMBAY_MUX(0x6, "CAM_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(53, "GPIO53",
|
|
KEEMBAY_MUX(0x0, "ETH_M0"),
|
|
KEEMBAY_MUX(0x1, "SPI2_M1"),
|
|
KEEMBAY_MUX(0x2, "SD0_M2"),
|
|
KEEMBAY_MUX(0x3, "TPIU_M3"),
|
|
KEEMBAY_MUX(0x4, "I2S2_M4"),
|
|
KEEMBAY_MUX(0x5, "LCD_M5"),
|
|
KEEMBAY_MUX(0x6, "CAM_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(54, "GPIO54",
|
|
KEEMBAY_MUX(0x0, "ETH_M0"),
|
|
KEEMBAY_MUX(0x1, "SPI2_M1"),
|
|
KEEMBAY_MUX(0x2, "SD0_M2"),
|
|
KEEMBAY_MUX(0x3, "TPIU_M3"),
|
|
KEEMBAY_MUX(0x4, "I2S2_M4"),
|
|
KEEMBAY_MUX(0x5, "LCD_M5"),
|
|
KEEMBAY_MUX(0x6, "CAM_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(55, "GPIO55",
|
|
KEEMBAY_MUX(0x0, "ETH_M0"),
|
|
KEEMBAY_MUX(0x1, "SPI2_M1"),
|
|
KEEMBAY_MUX(0x2, "SD1_M2"),
|
|
KEEMBAY_MUX(0x3, "TPIU_M3"),
|
|
KEEMBAY_MUX(0x4, "I2S2_M4"),
|
|
KEEMBAY_MUX(0x5, "LCD_M5"),
|
|
KEEMBAY_MUX(0x6, "CAM_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(56, "GPIO56",
|
|
KEEMBAY_MUX(0x0, "ETH_M0"),
|
|
KEEMBAY_MUX(0x1, "SPI2_M1"),
|
|
KEEMBAY_MUX(0x2, "SD1_M2"),
|
|
KEEMBAY_MUX(0x3, "TPIU_M3"),
|
|
KEEMBAY_MUX(0x4, "I2S2_M4"),
|
|
KEEMBAY_MUX(0x5, "LCD_M5"),
|
|
KEEMBAY_MUX(0x6, "CAM_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(57, "GPIO57",
|
|
KEEMBAY_MUX(0x0, "SPI1_M0"),
|
|
KEEMBAY_MUX(0x1, "I2S1_M1"),
|
|
KEEMBAY_MUX(0x2, "SD1_M2"),
|
|
KEEMBAY_MUX(0x3, "TPIU_M3"),
|
|
KEEMBAY_MUX(0x4, "UART0_M4"),
|
|
KEEMBAY_MUX(0x5, "LCD_M5"),
|
|
KEEMBAY_MUX(0x6, "CAM_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(58, "GPIO58",
|
|
KEEMBAY_MUX(0x0, "SPI1_M0"),
|
|
KEEMBAY_MUX(0x1, "ETH_M1"),
|
|
KEEMBAY_MUX(0x2, "SD0_M2"),
|
|
KEEMBAY_MUX(0x3, "TPIU_M3"),
|
|
KEEMBAY_MUX(0x4, "UART0_M4"),
|
|
KEEMBAY_MUX(0x5, "LCD_M5"),
|
|
KEEMBAY_MUX(0x6, "CAM_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(59, "GPIO59",
|
|
KEEMBAY_MUX(0x0, "SPI1_M0"),
|
|
KEEMBAY_MUX(0x1, "ETH_M1"),
|
|
KEEMBAY_MUX(0x2, "SD0_M2"),
|
|
KEEMBAY_MUX(0x3, "TPIU_M3"),
|
|
KEEMBAY_MUX(0x4, "UART0_M4"),
|
|
KEEMBAY_MUX(0x5, "LCD_M5"),
|
|
KEEMBAY_MUX(0x6, "CAM_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(60, "GPIO60",
|
|
KEEMBAY_MUX(0x0, "SPI1_M0"),
|
|
KEEMBAY_MUX(0x1, "ETH_M1"),
|
|
KEEMBAY_MUX(0x2, "I3C1_M2"),
|
|
KEEMBAY_MUX(0x3, "TPIU_M3"),
|
|
KEEMBAY_MUX(0x4, "UART0_M4"),
|
|
KEEMBAY_MUX(0x5, "LCD_M5"),
|
|
KEEMBAY_MUX(0x6, "CAM_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(61, "GPIO61",
|
|
KEEMBAY_MUX(0x0, "SPI1_M0"),
|
|
KEEMBAY_MUX(0x1, "ETH_M1"),
|
|
KEEMBAY_MUX(0x2, "SD0_M2"),
|
|
KEEMBAY_MUX(0x3, "TPIU_M3"),
|
|
KEEMBAY_MUX(0x4, "UART1_M4"),
|
|
KEEMBAY_MUX(0x5, "LCD_M5"),
|
|
KEEMBAY_MUX(0x6, "CAM_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(62, "GPIO62",
|
|
KEEMBAY_MUX(0x0, "SPI1_M0"),
|
|
KEEMBAY_MUX(0x1, "ETH_M1"),
|
|
KEEMBAY_MUX(0x2, "SD1_M2"),
|
|
KEEMBAY_MUX(0x3, "TPIU_M3"),
|
|
KEEMBAY_MUX(0x4, "UART1_M4"),
|
|
KEEMBAY_MUX(0x5, "LCD_M5"),
|
|
KEEMBAY_MUX(0x6, "CAM_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(63, "GPIO63",
|
|
KEEMBAY_MUX(0x0, "I2S1_M0"),
|
|
KEEMBAY_MUX(0x1, "SPI1_M1"),
|
|
KEEMBAY_MUX(0x2, "SD1_M2"),
|
|
KEEMBAY_MUX(0x3, "TPIU_M3"),
|
|
KEEMBAY_MUX(0x4, "UART1_M4"),
|
|
KEEMBAY_MUX(0x5, "LCD_M5"),
|
|
KEEMBAY_MUX(0x6, "CAM_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(64, "GPIO64",
|
|
KEEMBAY_MUX(0x0, "I2S2_M0"),
|
|
KEEMBAY_MUX(0x1, "SPI1_M1"),
|
|
KEEMBAY_MUX(0x2, "ETH_M2"),
|
|
KEEMBAY_MUX(0x3, "TPIU_M3"),
|
|
KEEMBAY_MUX(0x4, "UART1_M4"),
|
|
KEEMBAY_MUX(0x5, "LCD_M5"),
|
|
KEEMBAY_MUX(0x6, "CAM_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(65, "GPIO65",
|
|
KEEMBAY_MUX(0x0, "I3C0_M0"),
|
|
KEEMBAY_MUX(0x1, "SPI1_M1"),
|
|
KEEMBAY_MUX(0x2, "SD1_M2"),
|
|
KEEMBAY_MUX(0x3, "TPIU_M3"),
|
|
KEEMBAY_MUX(0x4, "SPI0_M4"),
|
|
KEEMBAY_MUX(0x5, "LCD_M5"),
|
|
KEEMBAY_MUX(0x6, "CAM_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(66, "GPIO66",
|
|
KEEMBAY_MUX(0x0, "I3C0_M0"),
|
|
KEEMBAY_MUX(0x1, "ETH_M1"),
|
|
KEEMBAY_MUX(0x2, "I2C0_M2"),
|
|
KEEMBAY_MUX(0x3, "TPIU_M3"),
|
|
KEEMBAY_MUX(0x4, "SPI0_M4"),
|
|
KEEMBAY_MUX(0x5, "LCD_M5"),
|
|
KEEMBAY_MUX(0x6, "CAM_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(67, "GPIO67",
|
|
KEEMBAY_MUX(0x0, "I3C1_M0"),
|
|
KEEMBAY_MUX(0x1, "ETH_M1"),
|
|
KEEMBAY_MUX(0x2, "I2C0_M2"),
|
|
KEEMBAY_MUX(0x3, "TPIU_M3"),
|
|
KEEMBAY_MUX(0x4, "SPI0_M4"),
|
|
KEEMBAY_MUX(0x5, "LCD_M5"),
|
|
KEEMBAY_MUX(0x6, "I2S3_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(68, "GPIO68",
|
|
KEEMBAY_MUX(0x0, "I3C1_M0"),
|
|
KEEMBAY_MUX(0x1, "ETH_M1"),
|
|
KEEMBAY_MUX(0x2, "I2C1_M2"),
|
|
KEEMBAY_MUX(0x3, "TPIU_M3"),
|
|
KEEMBAY_MUX(0x4, "SPI0_M4"),
|
|
KEEMBAY_MUX(0x5, "LCD_M5"),
|
|
KEEMBAY_MUX(0x6, "I2S3_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(69, "GPIO69",
|
|
KEEMBAY_MUX(0x0, "I3C2_M0"),
|
|
KEEMBAY_MUX(0x1, "ETH_M1"),
|
|
KEEMBAY_MUX(0x2, "I2C1_M2"),
|
|
KEEMBAY_MUX(0x3, "TPIU_M3"),
|
|
KEEMBAY_MUX(0x4, "SPI0_M4"),
|
|
KEEMBAY_MUX(0x5, "LCD_M5"),
|
|
KEEMBAY_MUX(0x6, "I2S3_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(70, "GPIO70",
|
|
KEEMBAY_MUX(0x0, "I3C2_M0"),
|
|
KEEMBAY_MUX(0x1, "ETH_M1"),
|
|
KEEMBAY_MUX(0x2, "SPI0_M2"),
|
|
KEEMBAY_MUX(0x3, "TPIU_M3"),
|
|
KEEMBAY_MUX(0x4, "SD0_M4"),
|
|
KEEMBAY_MUX(0x5, "LCD_M5"),
|
|
KEEMBAY_MUX(0x6, "I2S3_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(71, "GPIO71",
|
|
KEEMBAY_MUX(0x0, "I3C0_M0"),
|
|
KEEMBAY_MUX(0x1, "ETH_M1"),
|
|
KEEMBAY_MUX(0x2, "SLVDS1_M2"),
|
|
KEEMBAY_MUX(0x3, "TPIU_M3"),
|
|
KEEMBAY_MUX(0x4, "SD0_M4"),
|
|
KEEMBAY_MUX(0x5, "LCD_M5"),
|
|
KEEMBAY_MUX(0x6, "I2S3_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(72, "GPIO72",
|
|
KEEMBAY_MUX(0x0, "I3C1_M0"),
|
|
KEEMBAY_MUX(0x1, "ETH_M1"),
|
|
KEEMBAY_MUX(0x2, "SLVDS1_M2"),
|
|
KEEMBAY_MUX(0x3, "TPIU_M3"),
|
|
KEEMBAY_MUX(0x4, "SD0_M4"),
|
|
KEEMBAY_MUX(0x5, "LCD_M5"),
|
|
KEEMBAY_MUX(0x6, "UART2_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(73, "GPIO73",
|
|
KEEMBAY_MUX(0x0, "I3C2_M0"),
|
|
KEEMBAY_MUX(0x1, "ETH_M1"),
|
|
KEEMBAY_MUX(0x2, "SLVDS1_M2"),
|
|
KEEMBAY_MUX(0x3, "TPIU_M3"),
|
|
KEEMBAY_MUX(0x4, "SD0_M4"),
|
|
KEEMBAY_MUX(0x5, "LCD_M5"),
|
|
KEEMBAY_MUX(0x6, "UART2_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(74, "GPIO74",
|
|
KEEMBAY_MUX(0x0, "I3C0_M0"),
|
|
KEEMBAY_MUX(0x1, "ETH_M1"),
|
|
KEEMBAY_MUX(0x2, "SLVDS1_M2"),
|
|
KEEMBAY_MUX(0x3, "TPIU_M3"),
|
|
KEEMBAY_MUX(0x4, "SD0_M4"),
|
|
KEEMBAY_MUX(0x5, "LCD_M5"),
|
|
KEEMBAY_MUX(0x6, "UART2_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(75, "GPIO75",
|
|
KEEMBAY_MUX(0x0, "I3C0_M0"),
|
|
KEEMBAY_MUX(0x1, "ETH_M1"),
|
|
KEEMBAY_MUX(0x2, "SLVDS1_M2"),
|
|
KEEMBAY_MUX(0x3, "TPIU_M3"),
|
|
KEEMBAY_MUX(0x4, "SD0_M4"),
|
|
KEEMBAY_MUX(0x5, "LCD_M5"),
|
|
KEEMBAY_MUX(0x6, "UART2_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(76, "GPIO76",
|
|
KEEMBAY_MUX(0x0, "I2C2_M0"),
|
|
KEEMBAY_MUX(0x1, "I3C0_M1"),
|
|
KEEMBAY_MUX(0x2, "SLVDS1_M2"),
|
|
KEEMBAY_MUX(0x3, "TPIU_M3"),
|
|
KEEMBAY_MUX(0x4, "ETH_M4"),
|
|
KEEMBAY_MUX(0x5, "LCD_M5"),
|
|
KEEMBAY_MUX(0x6, "UART3_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(77, "GPIO77",
|
|
KEEMBAY_MUX(0x0, "PCIE_M0"),
|
|
KEEMBAY_MUX(0x1, "I3C1_M1"),
|
|
KEEMBAY_MUX(0x2, "SLVDS1_M2"),
|
|
KEEMBAY_MUX(0x3, "TPIU_M3"),
|
|
KEEMBAY_MUX(0x4, "I3C2_M4"),
|
|
KEEMBAY_MUX(0x5, "LCD_M5"),
|
|
KEEMBAY_MUX(0x6, "UART3_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(78, "GPIO78",
|
|
KEEMBAY_MUX(0x0, "PCIE_M0"),
|
|
KEEMBAY_MUX(0x1, "I3C2_M1"),
|
|
KEEMBAY_MUX(0x2, "SLVDS1_M2"),
|
|
KEEMBAY_MUX(0x3, "TPIU_M3"),
|
|
KEEMBAY_MUX(0x4, "I3C2_M4"),
|
|
KEEMBAY_MUX(0x5, "LCD_M5"),
|
|
KEEMBAY_MUX(0x6, "UART3_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
KEEMBAY_PIN_DESC(79, "GPIO79",
|
|
KEEMBAY_MUX(0x0, "PCIE_M0"),
|
|
KEEMBAY_MUX(0x1, "I2C2_M1"),
|
|
KEEMBAY_MUX(0x2, "SLVDS1_M2"),
|
|
KEEMBAY_MUX(0x3, "TPIU_M3"),
|
|
KEEMBAY_MUX(0x4, "I3C2_M4"),
|
|
KEEMBAY_MUX(0x5, "LCD_M5"),
|
|
KEEMBAY_MUX(0x6, "UART3_M6"),
|
|
KEEMBAY_MUX(0x7, "GPIO_M7")),
|
|
};
|
|
|
|
static inline u32 keembay_read_reg(void __iomem *base, unsigned int pin)
|
|
{
|
|
return readl(base + KEEMBAY_GPIO_REG_OFFSET(pin));
|
|
}
|
|
|
|
static inline u32 keembay_read_gpio_reg(void __iomem *base, unsigned int pin)
|
|
{
|
|
return keembay_read_reg(base, pin / KEEMBAY_GPIO_MAX_PER_REG);
|
|
}
|
|
|
|
static inline u32 keembay_read_pin(void __iomem *base, unsigned int pin)
|
|
{
|
|
u32 val = keembay_read_gpio_reg(base, pin);
|
|
|
|
return !!(val & BIT(pin % KEEMBAY_GPIO_MAX_PER_REG));
|
|
}
|
|
|
|
static inline void keembay_write_reg(u32 val, void __iomem *base, unsigned int pin)
|
|
{
|
|
writel(val, base + KEEMBAY_GPIO_REG_OFFSET(pin));
|
|
}
|
|
|
|
static inline void keembay_write_gpio_reg(u32 val, void __iomem *base, unsigned int pin)
|
|
{
|
|
keembay_write_reg(val, base, pin / KEEMBAY_GPIO_MAX_PER_REG);
|
|
}
|
|
|
|
static void keembay_gpio_invert(struct keembay_pinctrl *kpc, unsigned int pin)
|
|
{
|
|
unsigned int val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin);
|
|
|
|
/*
|
|
* This IP doesn't support the falling edge and low level interrupt
|
|
* trigger. Invert API is used to mimic the falling edge and low
|
|
* level support
|
|
*/
|
|
|
|
val |= FIELD_PREP(KEEMBAY_GPIO_MODE_INV_MASK, KEEMBAY_GPIO_MODE_INV_VAL);
|
|
keembay_write_reg(val, kpc->base1 + KEEMBAY_GPIO_MODE, pin);
|
|
}
|
|
|
|
static void keembay_gpio_restore_default(struct keembay_pinctrl *kpc, unsigned int pin)
|
|
{
|
|
unsigned int val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin);
|
|
|
|
val &= FIELD_PREP(KEEMBAY_GPIO_MODE_INV_MASK, 0);
|
|
keembay_write_reg(val, kpc->base1 + KEEMBAY_GPIO_MODE, pin);
|
|
}
|
|
|
|
static int keembay_request_gpio(struct pinctrl_dev *pctldev,
|
|
struct pinctrl_gpio_range *range, unsigned int pin)
|
|
{
|
|
struct keembay_pinctrl *kpc = pinctrl_dev_get_drvdata(pctldev);
|
|
unsigned int val;
|
|
|
|
if (pin >= kpc->npins)
|
|
return -EINVAL;
|
|
|
|
val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin);
|
|
val = FIELD_GET(KEEMBAY_GPIO_MODE_SELECT_MASK, val);
|
|
|
|
/* As per Pin Mux Map, Modes 0 to 6 are for peripherals */
|
|
if (val != KEEMBAY_GPIO_MODE_DEFAULT)
|
|
return -EBUSY;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int keembay_set_mux(struct pinctrl_dev *pctldev, unsigned int fun_sel,
|
|
unsigned int grp_sel)
|
|
{
|
|
struct keembay_pinctrl *kpc = pinctrl_dev_get_drvdata(pctldev);
|
|
struct function_desc *func;
|
|
struct group_desc *grp;
|
|
unsigned int val;
|
|
u8 pin_mode;
|
|
int pin;
|
|
|
|
grp = pinctrl_generic_get_group(pctldev, grp_sel);
|
|
if (!grp)
|
|
return -EINVAL;
|
|
|
|
func = pinmux_generic_get_function(pctldev, fun_sel);
|
|
if (!func)
|
|
return -EINVAL;
|
|
|
|
/* Change modes for pins in the selected group */
|
|
pin = *grp->grp.pins;
|
|
pin_mode = *(u8 *)(func->data);
|
|
|
|
val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin);
|
|
val = u32_replace_bits(val, pin_mode, KEEMBAY_GPIO_MODE_SELECT_MASK);
|
|
keembay_write_reg(val, kpc->base1 + KEEMBAY_GPIO_MODE, pin);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u32 keembay_pinconf_get_pull(struct keembay_pinctrl *kpc, unsigned int pin)
|
|
{
|
|
unsigned int val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin);
|
|
|
|
return FIELD_GET(KEEMBAY_GPIO_MODE_PULLUP_MASK, val);
|
|
}
|
|
|
|
static int keembay_pinconf_set_pull(struct keembay_pinctrl *kpc, unsigned int pin,
|
|
unsigned int pull)
|
|
{
|
|
unsigned int val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin);
|
|
|
|
val = u32_replace_bits(val, pull, KEEMBAY_GPIO_MODE_PULLUP_MASK);
|
|
keembay_write_reg(val, kpc->base1 + KEEMBAY_GPIO_MODE, pin);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int keembay_pinconf_get_drive(struct keembay_pinctrl *kpc, unsigned int pin)
|
|
{
|
|
unsigned int val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin);
|
|
|
|
val = FIELD_GET(KEEMBAY_GPIO_MODE_DRIVE_MASK, val) * 4;
|
|
if (val)
|
|
return val;
|
|
|
|
return KEEMBAY_GPIO_MIN_STRENGTH;
|
|
}
|
|
|
|
static int keembay_pinconf_set_drive(struct keembay_pinctrl *kpc, unsigned int pin,
|
|
unsigned int drive)
|
|
{
|
|
unsigned int val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin);
|
|
unsigned int strength = clamp_val(drive, KEEMBAY_GPIO_MIN_STRENGTH,
|
|
KEEMBAY_GPIO_MAX_STRENGTH) / 4;
|
|
|
|
val = u32_replace_bits(val, strength, KEEMBAY_GPIO_MODE_DRIVE_MASK);
|
|
keembay_write_reg(val, kpc->base1 + KEEMBAY_GPIO_MODE, pin);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int keembay_pinconf_get_slew_rate(struct keembay_pinctrl *kpc, unsigned int pin)
|
|
{
|
|
unsigned int val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin);
|
|
|
|
return !!(val & KEEMBAY_GPIO_MODE_SLEW_RATE);
|
|
}
|
|
|
|
static int keembay_pinconf_set_slew_rate(struct keembay_pinctrl *kpc, unsigned int pin,
|
|
unsigned int slew_rate)
|
|
{
|
|
unsigned int val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin);
|
|
|
|
if (slew_rate)
|
|
val |= KEEMBAY_GPIO_MODE_SLEW_RATE;
|
|
else
|
|
val &= ~KEEMBAY_GPIO_MODE_SLEW_RATE;
|
|
|
|
keembay_write_reg(val, kpc->base1 + KEEMBAY_GPIO_MODE, pin);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int keembay_pinconf_get_schmitt(struct keembay_pinctrl *kpc, unsigned int pin)
|
|
{
|
|
unsigned int val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin);
|
|
|
|
return !!(val & KEEMBAY_GPIO_MODE_SCHMITT_EN);
|
|
}
|
|
|
|
static int keembay_pinconf_set_schmitt(struct keembay_pinctrl *kpc, unsigned int pin,
|
|
unsigned int schmitt_en)
|
|
{
|
|
unsigned int val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin);
|
|
|
|
if (schmitt_en)
|
|
val |= KEEMBAY_GPIO_MODE_SCHMITT_EN;
|
|
else
|
|
val &= ~KEEMBAY_GPIO_MODE_SCHMITT_EN;
|
|
|
|
keembay_write_reg(val, kpc->base1 + KEEMBAY_GPIO_MODE, pin);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int keembay_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin,
|
|
unsigned long *cfg)
|
|
{
|
|
struct keembay_pinctrl *kpc = pinctrl_dev_get_drvdata(pctldev);
|
|
unsigned int param = pinconf_to_config_param(*cfg);
|
|
unsigned int val;
|
|
|
|
if (pin >= kpc->npins)
|
|
return -EINVAL;
|
|
|
|
switch (param) {
|
|
case PIN_CONFIG_BIAS_DISABLE:
|
|
if (keembay_pinconf_get_pull(kpc, pin) != KEEMBAY_GPIO_DISABLE)
|
|
return -EINVAL;
|
|
break;
|
|
|
|
case PIN_CONFIG_BIAS_PULL_UP:
|
|
if (keembay_pinconf_get_pull(kpc, pin) != KEEMBAY_GPIO_PULL_UP)
|
|
return -EINVAL;
|
|
break;
|
|
|
|
case PIN_CONFIG_BIAS_PULL_DOWN:
|
|
if (keembay_pinconf_get_pull(kpc, pin) != KEEMBAY_GPIO_PULL_DOWN)
|
|
return -EINVAL;
|
|
break;
|
|
|
|
case PIN_CONFIG_BIAS_BUS_HOLD:
|
|
if (keembay_pinconf_get_pull(kpc, pin) != KEEMBAY_GPIO_BUS_HOLD)
|
|
return -EINVAL;
|
|
break;
|
|
|
|
case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
|
|
if (!keembay_pinconf_get_schmitt(kpc, pin))
|
|
return -EINVAL;
|
|
break;
|
|
|
|
case PIN_CONFIG_SLEW_RATE:
|
|
val = keembay_pinconf_get_slew_rate(kpc, pin);
|
|
*cfg = pinconf_to_config_packed(param, val);
|
|
break;
|
|
|
|
case PIN_CONFIG_DRIVE_STRENGTH:
|
|
val = keembay_pinconf_get_drive(kpc, pin);
|
|
*cfg = pinconf_to_config_packed(param, val);
|
|
break;
|
|
|
|
default:
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int keembay_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
|
|
unsigned long *cfg, unsigned int num_configs)
|
|
{
|
|
struct keembay_pinctrl *kpc = pinctrl_dev_get_drvdata(pctldev);
|
|
enum pin_config_param param;
|
|
unsigned int arg, i;
|
|
int ret = 0;
|
|
|
|
if (pin >= kpc->npins)
|
|
return -EINVAL;
|
|
|
|
for (i = 0; i < num_configs; i++) {
|
|
param = pinconf_to_config_param(cfg[i]);
|
|
arg = pinconf_to_config_argument(cfg[i]);
|
|
|
|
switch (param) {
|
|
case PIN_CONFIG_BIAS_DISABLE:
|
|
ret = keembay_pinconf_set_pull(kpc, pin, KEEMBAY_GPIO_DISABLE);
|
|
break;
|
|
|
|
case PIN_CONFIG_BIAS_PULL_UP:
|
|
ret = keembay_pinconf_set_pull(kpc, pin, KEEMBAY_GPIO_PULL_UP);
|
|
break;
|
|
|
|
case PIN_CONFIG_BIAS_PULL_DOWN:
|
|
ret = keembay_pinconf_set_pull(kpc, pin, KEEMBAY_GPIO_PULL_DOWN);
|
|
break;
|
|
|
|
case PIN_CONFIG_BIAS_BUS_HOLD:
|
|
ret = keembay_pinconf_set_pull(kpc, pin, KEEMBAY_GPIO_BUS_HOLD);
|
|
break;
|
|
|
|
case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
|
|
ret = keembay_pinconf_set_schmitt(kpc, pin, arg);
|
|
break;
|
|
|
|
case PIN_CONFIG_SLEW_RATE:
|
|
ret = keembay_pinconf_set_slew_rate(kpc, pin, arg);
|
|
break;
|
|
|
|
case PIN_CONFIG_DRIVE_STRENGTH:
|
|
ret = keembay_pinconf_set_drive(kpc, pin, arg);
|
|
break;
|
|
|
|
default:
|
|
return -ENOTSUPP;
|
|
}
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static const struct pinctrl_ops keembay_pctlops = {
|
|
.get_groups_count = pinctrl_generic_get_group_count,
|
|
.get_group_name = pinctrl_generic_get_group_name,
|
|
.get_group_pins = pinctrl_generic_get_group_pins,
|
|
.dt_node_to_map = pinconf_generic_dt_node_to_map_all,
|
|
.dt_free_map = pinconf_generic_dt_free_map,
|
|
};
|
|
|
|
static const struct pinmux_ops keembay_pmxops = {
|
|
.get_functions_count = pinmux_generic_get_function_count,
|
|
.get_function_name = pinmux_generic_get_function_name,
|
|
.get_function_groups = pinmux_generic_get_function_groups,
|
|
.gpio_request_enable = keembay_request_gpio,
|
|
.set_mux = keembay_set_mux,
|
|
};
|
|
|
|
static const struct pinconf_ops keembay_confops = {
|
|
.is_generic = true,
|
|
.pin_config_get = keembay_pinconf_get,
|
|
.pin_config_set = keembay_pinconf_set,
|
|
};
|
|
|
|
static struct pinctrl_desc keembay_pinctrl_desc = {
|
|
.name = "keembay-pinmux",
|
|
.pctlops = &keembay_pctlops,
|
|
.pmxops = &keembay_pmxops,
|
|
.confops = &keembay_confops,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static int keembay_gpio_get(struct gpio_chip *gc, unsigned int pin)
|
|
{
|
|
struct keembay_pinctrl *kpc = gpiochip_get_data(gc);
|
|
unsigned int val, offset;
|
|
|
|
val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin);
|
|
offset = (val & KEEMBAY_GPIO_MODE_DIR) ? KEEMBAY_GPIO_DATA_IN : KEEMBAY_GPIO_DATA_OUT;
|
|
|
|
return keembay_read_pin(kpc->base0 + offset, pin);
|
|
}
|
|
|
|
static void keembay_gpio_set(struct gpio_chip *gc, unsigned int pin, int val)
|
|
{
|
|
struct keembay_pinctrl *kpc = gpiochip_get_data(gc);
|
|
unsigned int reg_val;
|
|
|
|
reg_val = keembay_read_gpio_reg(kpc->base0 + KEEMBAY_GPIO_DATA_OUT, pin);
|
|
if (val)
|
|
keembay_write_gpio_reg(reg_val | BIT(pin % KEEMBAY_GPIO_MAX_PER_REG),
|
|
kpc->base0 + KEEMBAY_GPIO_DATA_HIGH, pin);
|
|
else
|
|
keembay_write_gpio_reg(~reg_val | BIT(pin % KEEMBAY_GPIO_MAX_PER_REG),
|
|
kpc->base0 + KEEMBAY_GPIO_DATA_LOW, pin);
|
|
}
|
|
|
|
static int keembay_gpio_get_direction(struct gpio_chip *gc, unsigned int pin)
|
|
{
|
|
struct keembay_pinctrl *kpc = gpiochip_get_data(gc);
|
|
unsigned int val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin);
|
|
|
|
return !!(val & KEEMBAY_GPIO_MODE_DIR);
|
|
}
|
|
|
|
static int keembay_gpio_set_direction_in(struct gpio_chip *gc, unsigned int pin)
|
|
{
|
|
struct keembay_pinctrl *kpc = gpiochip_get_data(gc);
|
|
unsigned int val;
|
|
|
|
val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin);
|
|
val |= KEEMBAY_GPIO_MODE_DIR;
|
|
keembay_write_reg(val, kpc->base1 + KEEMBAY_GPIO_MODE, pin);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int keembay_gpio_set_direction_out(struct gpio_chip *gc,
|
|
unsigned int pin, int value)
|
|
{
|
|
struct keembay_pinctrl *kpc = gpiochip_get_data(gc);
|
|
unsigned int val;
|
|
|
|
val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin);
|
|
val &= ~KEEMBAY_GPIO_MODE_DIR;
|
|
keembay_write_reg(val, kpc->base1 + KEEMBAY_GPIO_MODE, pin);
|
|
keembay_gpio_set(gc, pin, value);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void keembay_gpio_irq_handler(struct irq_desc *desc)
|
|
{
|
|
struct gpio_chip *gc = irq_desc_get_handler_data(desc);
|
|
unsigned int kmb_irq = irq_desc_get_irq(desc);
|
|
unsigned long reg, clump = 0, bit = 0;
|
|
struct irq_chip *parent_chip;
|
|
struct keembay_pinctrl *kpc;
|
|
unsigned int src, pin, val;
|
|
|
|
/* Identify GPIO interrupt number from GIC interrupt number */
|
|
for (src = 0; src < KEEMBAY_GPIO_NUM_IRQ; src++) {
|
|
if (kmb_irq == gc->irq.parents[src])
|
|
break;
|
|
}
|
|
|
|
if (src == KEEMBAY_GPIO_NUM_IRQ)
|
|
return;
|
|
|
|
parent_chip = irq_desc_get_chip(desc);
|
|
kpc = gpiochip_get_data(gc);
|
|
|
|
chained_irq_enter(parent_chip, desc);
|
|
reg = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_INT_CFG, src);
|
|
|
|
/*
|
|
* Each Interrupt line can be shared by up to 4 GPIO pins. Enable bit
|
|
* and input values were checked to identify the source of the
|
|
* Interrupt. The checked enable bit positions are 7, 15, 23 and 31.
|
|
*/
|
|
for_each_set_clump8(bit, clump, ®, BITS_PER_TYPE(typeof(reg))) {
|
|
pin = clump & ~KEEMBAY_GPIO_IRQ_ENABLE;
|
|
val = keembay_read_pin(kpc->base0 + KEEMBAY_GPIO_DATA_IN, pin);
|
|
kmb_irq = irq_linear_revmap(gc->irq.domain, pin);
|
|
|
|
/* Checks if the interrupt is enabled */
|
|
if (val && (clump & KEEMBAY_GPIO_IRQ_ENABLE))
|
|
generic_handle_irq(kmb_irq);
|
|
}
|
|
chained_irq_exit(parent_chip, desc);
|
|
}
|
|
|
|
static void keembay_gpio_clear_irq(struct irq_data *data, unsigned long pos,
|
|
u32 src, irq_hw_number_t pin)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
|
|
struct keembay_pinctrl *kpc = gpiochip_get_data(gc);
|
|
unsigned long trig = irqd_get_trigger_type(data);
|
|
struct keembay_gpio_irq *irq = &kpc->irq[src];
|
|
unsigned long val;
|
|
|
|
/* Check if the value of pos/KEEMBAY_GPIO_NUM_IRQ is in valid range. */
|
|
if ((pos / KEEMBAY_GPIO_NUM_IRQ) >= KEEMBAY_GPIO_MAX_PER_IRQ)
|
|
return;
|
|
|
|
/* Retains val register as it handles other interrupts as well. */
|
|
val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_INT_CFG, src);
|
|
|
|
bitmap_set_value8(&val, 0, pos);
|
|
keembay_write_reg(val, kpc->base1 + KEEMBAY_GPIO_INT_CFG, src);
|
|
|
|
irq->num_share--;
|
|
irq->pins[pos / KEEMBAY_GPIO_NUM_IRQ] = 0;
|
|
|
|
if (trig & IRQ_TYPE_LEVEL_MASK)
|
|
keembay_gpio_restore_default(kpc, pin);
|
|
|
|
if (irq->trigger == IRQ_TYPE_LEVEL_HIGH)
|
|
kpc->max_gpios_level_type++;
|
|
else if (irq->trigger == IRQ_TYPE_EDGE_RISING)
|
|
kpc->max_gpios_edge_type++;
|
|
}
|
|
|
|
static int keembay_find_free_slot(struct keembay_pinctrl *kpc, unsigned int src)
|
|
{
|
|
unsigned long val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_INT_CFG, src);
|
|
|
|
return bitmap_find_free_region(&val, KEEMBAY_GPIO_MAX_PER_REG, 3) / KEEMBAY_GPIO_NUM_IRQ;
|
|
}
|
|
|
|
static int keembay_find_free_src(struct keembay_pinctrl *kpc, unsigned int trig)
|
|
{
|
|
int src, type = 0;
|
|
|
|
if (trig & IRQ_TYPE_LEVEL_MASK)
|
|
type = IRQ_TYPE_LEVEL_HIGH;
|
|
else if (trig & IRQ_TYPE_EDGE_BOTH)
|
|
type = IRQ_TYPE_EDGE_RISING;
|
|
|
|
for (src = 0; src < KEEMBAY_GPIO_NUM_IRQ; src++) {
|
|
if (kpc->irq[src].trigger != type)
|
|
continue;
|
|
|
|
if (!keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_INT_CFG, src) ||
|
|
kpc->irq[src].num_share < KEEMBAY_GPIO_MAX_PER_IRQ)
|
|
return src;
|
|
}
|
|
|
|
return -EBUSY;
|
|
}
|
|
|
|
static void keembay_gpio_set_irq(struct keembay_pinctrl *kpc, int src,
|
|
int slot, irq_hw_number_t pin)
|
|
{
|
|
unsigned long val = pin | KEEMBAY_GPIO_IRQ_ENABLE;
|
|
struct keembay_gpio_irq *irq = &kpc->irq[src];
|
|
unsigned long flags, reg;
|
|
|
|
raw_spin_lock_irqsave(&kpc->lock, flags);
|
|
reg = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_INT_CFG, src);
|
|
bitmap_set_value8(®, val, slot * 8);
|
|
keembay_write_reg(reg, kpc->base1 + KEEMBAY_GPIO_INT_CFG, src);
|
|
raw_spin_unlock_irqrestore(&kpc->lock, flags);
|
|
|
|
if (irq->trigger == IRQ_TYPE_LEVEL_HIGH)
|
|
kpc->max_gpios_level_type--;
|
|
else if (irq->trigger == IRQ_TYPE_EDGE_RISING)
|
|
kpc->max_gpios_edge_type--;
|
|
|
|
irq->source = src;
|
|
irq->pins[slot] = pin;
|
|
irq->num_share++;
|
|
}
|
|
|
|
static void keembay_gpio_irq_enable(struct irq_data *data)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
|
|
struct keembay_pinctrl *kpc = gpiochip_get_data(gc);
|
|
unsigned int trig = irqd_get_trigger_type(data);
|
|
irq_hw_number_t pin = irqd_to_hwirq(data);
|
|
int src, slot;
|
|
|
|
/* Check which Interrupt source and slot is available */
|
|
src = keembay_find_free_src(kpc, trig);
|
|
slot = keembay_find_free_slot(kpc, src);
|
|
|
|
if (src < 0 || slot < 0)
|
|
return;
|
|
|
|
if (trig & KEEMBAY_GPIO_SENSE_LOW)
|
|
keembay_gpio_invert(kpc, pin);
|
|
|
|
keembay_gpio_set_irq(kpc, src, slot, pin);
|
|
}
|
|
|
|
static void keembay_gpio_irq_ack(struct irq_data *data)
|
|
{
|
|
/*
|
|
* The keembay_gpio_irq_ack function is needed to handle_edge_irq.
|
|
* IRQ ack is not possible from the SOC perspective. The IP by itself
|
|
* is used for handling interrupts which do not come in short-time and
|
|
* not used as protocol or communication interrupts. All the interrupts
|
|
* are threaded IRQ interrupts. But this function is expected to be
|
|
* present as the gpio IP is registered with irq framework. Otherwise
|
|
* handle_edge_irq() fails.
|
|
*/
|
|
}
|
|
|
|
static void keembay_gpio_irq_disable(struct irq_data *data)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
|
|
struct keembay_pinctrl *kpc = gpiochip_get_data(gc);
|
|
irq_hw_number_t pin = irqd_to_hwirq(data);
|
|
unsigned long reg, clump = 0, pos = 0;
|
|
unsigned int src;
|
|
|
|
for (src = 0; src < KEEMBAY_GPIO_NUM_IRQ; src++) {
|
|
reg = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_INT_CFG, src);
|
|
for_each_set_clump8(pos, clump, ®, BITS_PER_TYPE(typeof(reg))) {
|
|
if ((clump & ~KEEMBAY_GPIO_IRQ_ENABLE) == pin) {
|
|
keembay_gpio_clear_irq(data, pos, src, pin);
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
static int keembay_gpio_irq_set_type(struct irq_data *data, unsigned int type)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
|
|
struct keembay_pinctrl *kpc = gpiochip_get_data(gc);
|
|
|
|
/* Change EDGE_BOTH as EDGE_RISING in order to claim the IRQ for power button */
|
|
if (!kpc->max_gpios_edge_type && (type & IRQ_TYPE_EDGE_BOTH))
|
|
type = IRQ_TYPE_EDGE_RISING;
|
|
|
|
if (!kpc->max_gpios_level_type && (type & IRQ_TYPE_LEVEL_MASK))
|
|
type = IRQ_TYPE_NONE;
|
|
|
|
if (type & IRQ_TYPE_EDGE_BOTH)
|
|
irq_set_handler_locked(data, handle_edge_irq);
|
|
else if (type & IRQ_TYPE_LEVEL_MASK)
|
|
irq_set_handler_locked(data, handle_level_irq);
|
|
else
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int keembay_gpio_add_pin_ranges(struct gpio_chip *chip)
|
|
{
|
|
struct keembay_pinctrl *kpc = gpiochip_get_data(chip);
|
|
int ret;
|
|
|
|
ret = gpiochip_add_pin_range(chip, dev_name(kpc->dev), 0, 0, chip->ngpio);
|
|
if (ret)
|
|
dev_err_probe(kpc->dev, ret, "failed to add GPIO pin range\n");
|
|
return ret;
|
|
}
|
|
|
|
static struct irq_chip keembay_gpio_irqchip = {
|
|
.name = "keembay-gpio",
|
|
.irq_enable = keembay_gpio_irq_enable,
|
|
.irq_disable = keembay_gpio_irq_disable,
|
|
.irq_set_type = keembay_gpio_irq_set_type,
|
|
.irq_ack = keembay_gpio_irq_ack,
|
|
};
|
|
|
|
static int keembay_gpiochip_probe(struct keembay_pinctrl *kpc,
|
|
struct platform_device *pdev)
|
|
{
|
|
unsigned int i, level_line = 0, edge_line = 0;
|
|
struct gpio_chip *gc = &kpc->chip;
|
|
struct gpio_irq_chip *girq;
|
|
|
|
/* Setup GPIO IRQ chip */
|
|
girq = &kpc->chip.irq;
|
|
girq->chip = &keembay_gpio_irqchip;
|
|
girq->parent_handler = keembay_gpio_irq_handler;
|
|
girq->num_parents = KEEMBAY_GPIO_NUM_IRQ;
|
|
girq->parents = devm_kcalloc(kpc->dev, girq->num_parents,
|
|
sizeof(*girq->parents), GFP_KERNEL);
|
|
|
|
if (!girq->parents)
|
|
return -ENOMEM;
|
|
|
|
/* Setup GPIO chip */
|
|
gc->label = dev_name(kpc->dev);
|
|
gc->parent = kpc->dev;
|
|
gc->request = gpiochip_generic_request;
|
|
gc->free = gpiochip_generic_free;
|
|
gc->get_direction = keembay_gpio_get_direction;
|
|
gc->direction_input = keembay_gpio_set_direction_in;
|
|
gc->direction_output = keembay_gpio_set_direction_out;
|
|
gc->get = keembay_gpio_get;
|
|
gc->set = keembay_gpio_set;
|
|
gc->set_config = gpiochip_generic_config;
|
|
gc->base = -1;
|
|
gc->ngpio = kpc->npins;
|
|
gc->add_pin_ranges = keembay_gpio_add_pin_ranges;
|
|
|
|
for (i = 0; i < KEEMBAY_GPIO_NUM_IRQ; i++) {
|
|
struct keembay_gpio_irq *kmb_irq = &kpc->irq[i];
|
|
int irq;
|
|
|
|
irq = platform_get_irq_optional(pdev, i);
|
|
if (irq <= 0)
|
|
continue;
|
|
|
|
girq->parents[i] = irq;
|
|
kmb_irq->line = girq->parents[i];
|
|
kmb_irq->source = i;
|
|
kmb_irq->trigger = irq_get_trigger_type(girq->parents[i]);
|
|
kmb_irq->num_share = 0;
|
|
|
|
if (kmb_irq->trigger == IRQ_TYPE_LEVEL_HIGH)
|
|
level_line++;
|
|
else
|
|
edge_line++;
|
|
}
|
|
|
|
kpc->max_gpios_level_type = level_line * KEEMBAY_GPIO_MAX_PER_IRQ;
|
|
kpc->max_gpios_edge_type = edge_line * KEEMBAY_GPIO_MAX_PER_IRQ;
|
|
|
|
girq->default_type = IRQ_TYPE_NONE;
|
|
girq->handler = handle_bad_irq;
|
|
|
|
return devm_gpiochip_add_data(kpc->dev, gc, kpc);
|
|
}
|
|
|
|
static int keembay_build_groups(struct keembay_pinctrl *kpc)
|
|
{
|
|
struct pingroup *grp;
|
|
unsigned int i;
|
|
|
|
kpc->ngroups = kpc->npins;
|
|
grp = devm_kcalloc(kpc->dev, kpc->ngroups, sizeof(*grp), GFP_KERNEL);
|
|
if (!grp)
|
|
return -ENOMEM;
|
|
|
|
/* Each pin is categorised as one group */
|
|
for (i = 0; i < kpc->ngroups; i++) {
|
|
const struct pinctrl_pin_desc *pdesc = keembay_pins + i;
|
|
struct pingroup *kmb_grp = grp + i;
|
|
|
|
kmb_grp->name = pdesc->name;
|
|
kmb_grp->pins = (int *)&pdesc->number;
|
|
pinctrl_generic_add_group(kpc->pctrl, kmb_grp->name,
|
|
kmb_grp->pins, 1, NULL);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int keembay_pinctrl_reg(struct keembay_pinctrl *kpc, struct device *dev)
|
|
{
|
|
int ret;
|
|
|
|
keembay_pinctrl_desc.pins = keembay_pins;
|
|
ret = of_property_read_u32(dev->of_node, "ngpios", &kpc->npins);
|
|
if (ret < 0)
|
|
return ret;
|
|
keembay_pinctrl_desc.npins = kpc->npins;
|
|
|
|
kpc->pctrl = devm_pinctrl_register(kpc->dev, &keembay_pinctrl_desc, kpc);
|
|
|
|
return PTR_ERR_OR_ZERO(kpc->pctrl);
|
|
}
|
|
|
|
static int keembay_add_functions(struct keembay_pinctrl *kpc,
|
|
struct function_desc *functions)
|
|
{
|
|
unsigned int i;
|
|
|
|
/* Assign the groups for each function */
|
|
for (i = 0; i < kpc->nfuncs; i++) {
|
|
struct function_desc *func = &functions[i];
|
|
const char **group_names;
|
|
unsigned int grp_idx = 0;
|
|
int j;
|
|
|
|
group_names = devm_kcalloc(kpc->dev, func->func.ngroups,
|
|
sizeof(*group_names), GFP_KERNEL);
|
|
if (!group_names)
|
|
return -ENOMEM;
|
|
|
|
for (j = 0; j < kpc->npins; j++) {
|
|
const struct pinctrl_pin_desc *pdesc = &keembay_pins[j];
|
|
struct keembay_mux_desc *mux;
|
|
|
|
for (mux = pdesc->drv_data; mux->name; mux++) {
|
|
if (!strcmp(mux->name, func->func.name))
|
|
group_names[grp_idx++] = pdesc->name;
|
|
}
|
|
}
|
|
|
|
func->func.groups = group_names;
|
|
}
|
|
|
|
/* Add all functions */
|
|
for (i = 0; i < kpc->nfuncs; i++) {
|
|
pinmux_generic_add_function(kpc->pctrl,
|
|
functions[i].func.name,
|
|
functions[i].func.groups,
|
|
functions[i].func.ngroups,
|
|
functions[i].data);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int keembay_build_functions(struct keembay_pinctrl *kpc)
|
|
{
|
|
struct function_desc *keembay_funcs, *new_funcs;
|
|
int i;
|
|
|
|
/*
|
|
* Allocate maximum possible number of functions. Assume every pin
|
|
* being part of 8 (hw maximum) globally unique muxes.
|
|
*/
|
|
kpc->nfuncs = 0;
|
|
keembay_funcs = kcalloc(kpc->npins * 8, sizeof(*keembay_funcs), GFP_KERNEL);
|
|
if (!keembay_funcs)
|
|
return -ENOMEM;
|
|
|
|
/* Setup 1 function for each unique mux */
|
|
for (i = 0; i < kpc->npins; i++) {
|
|
const struct pinctrl_pin_desc *pdesc = keembay_pins + i;
|
|
struct keembay_mux_desc *mux;
|
|
|
|
for (mux = pdesc->drv_data; mux->name; mux++) {
|
|
struct function_desc *fdesc;
|
|
|
|
/* Check if we already have function for this mux */
|
|
for (fdesc = keembay_funcs; fdesc->func.name; fdesc++) {
|
|
if (!strcmp(mux->name, fdesc->func.name)) {
|
|
fdesc->func.ngroups++;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Setup new function for this mux we didn't see before */
|
|
if (!fdesc->func.name) {
|
|
fdesc->func.name = mux->name;
|
|
fdesc->func.ngroups = 1;
|
|
fdesc->data = &mux->mode;
|
|
kpc->nfuncs++;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Reallocate memory based on actual number of functions */
|
|
new_funcs = krealloc(keembay_funcs, kpc->nfuncs * sizeof(*new_funcs), GFP_KERNEL);
|
|
if (!new_funcs) {
|
|
kfree(keembay_funcs);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
return keembay_add_functions(kpc, new_funcs);
|
|
}
|
|
|
|
static const struct keembay_pin_soc keembay_data = {
|
|
.pins = keembay_pins,
|
|
};
|
|
|
|
static const struct of_device_id keembay_pinctrl_match[] = {
|
|
{ .compatible = "intel,keembay-pinctrl", .data = &keembay_data },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, keembay_pinctrl_match);
|
|
|
|
static int keembay_pinctrl_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct keembay_pinctrl *kpc;
|
|
int ret;
|
|
|
|
kpc = devm_kzalloc(dev, sizeof(*kpc), GFP_KERNEL);
|
|
if (!kpc)
|
|
return -ENOMEM;
|
|
|
|
kpc->dev = dev;
|
|
kpc->soc = device_get_match_data(dev);
|
|
|
|
kpc->base0 = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(kpc->base0))
|
|
return PTR_ERR(kpc->base0);
|
|
|
|
kpc->base1 = devm_platform_ioremap_resource(pdev, 1);
|
|
if (IS_ERR(kpc->base1))
|
|
return PTR_ERR(kpc->base1);
|
|
|
|
raw_spin_lock_init(&kpc->lock);
|
|
|
|
ret = keembay_pinctrl_reg(kpc, dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = keembay_build_groups(kpc);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = keembay_build_functions(kpc);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = keembay_gpiochip_probe(kpc, pdev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
platform_set_drvdata(pdev, kpc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver keembay_pinctrl_driver = {
|
|
.probe = keembay_pinctrl_probe,
|
|
.driver = {
|
|
.name = "keembay-pinctrl",
|
|
.of_match_table = keembay_pinctrl_match,
|
|
},
|
|
};
|
|
module_platform_driver(keembay_pinctrl_driver);
|
|
|
|
MODULE_AUTHOR("Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>");
|
|
MODULE_AUTHOR("Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com>");
|
|
MODULE_AUTHOR("Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>");
|
|
MODULE_DESCRIPTION("Intel Keem Bay SoC pinctrl/GPIO driver");
|
|
MODULE_LICENSE("GPL");
|