Matthew Minter 30fdfb929e PCI: Add a call to pci_assign_irq() in pci_device_probe() ... The pci_assign_irq() function allows assignment of an IRQ to devices during device enable time rather than only at boot. Therefore call it in the pci_device_probe() function during the enable device code path so this assignment can be performed. This patch will do nothing on arches which do not set the IRQ mapping function pointers and is therefore currently a nop, however as support for these function pointers is added to arch-specific code this will cause IRQ assignment to migrate to device enable time allowing the new code paths to be used. Signed-off-by: Matthew Minter <matt@masarand.com> [lorenzo.pieralisi@arm.com: moved pci_assign_irq() call site] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>		2017-07-02 16:14:28 -05:00
..
dwc	PCI: designware: Convert PCI scan API to pci_scan_root_bus_bridge()	2017-07-02 16:14:23 -05:00
endpoint	PCI: endpoint: functions: Add an EP function to test PCI	2017-04-11 14:18:37 -05:00
host	PCI: xilinx-nwl: Convert PCI scan API to pci_scan_root_bus_bridge()	2017-07-02 16:14:27 -05:00
hotplug	Annotation of module parameters that specify device settings	2017-05-10 19:13:03 -07:00
pcie	Merge branch 'pci/enumeration' into next	2017-04-28 10:33:55 -05:00
switch	switchtec: Add IOCTLs to the Switchtec driver	2017-04-12 12:23:37 -05:00
access.c	Merge branch 'pci/misc' into next	2017-04-28 10:34:14 -05:00
ats.c	PCI: Remove pci_ats_enabled()	2015-08-13 15:59:59 -05:00
bus.c	PCI: Autosense device removal in pci_bridge_d3_update()	2016-11-17 18:44:56 -06:00
ecam.c	PCI: ECAM: Map config region with pci_remap_cfgspace()	2017-04-24 13:53:14 -05:00
host-bridge.c	cxl: use pcibios_free_controller_deferred() when removing vPHBs	2016-08-22 11:09:33 +10:00
hotplug-pci.c
htirq.c
iov.c	PCI: Add sysfs sriov_drivers_autoprobe to control VF driver binding	2017-04-20 08:53:51 -05:00
irq.c	pci-v4.12-changes	2017-05-08 19:03:25 -07:00
Kconfig	Merge branch 'pci/switchtec' into next	2017-04-28 10:33:41 -05:00
Makefile	PCI: Build setup-irq.o on all arches	2017-07-02 16:14:27 -05:00
mmap.c	PCI: Add I/O BAR support to generic pci_mmap_resource_range()	2017-04-20 08:47:47 -05:00
msi.c	pci-v4.12-changes	2017-05-08 19:03:25 -07:00
of.c	PCI/MSI: Use of_msi_get_domain instead of open-coded "msi-parent" parsing	2015-10-16 13:07:14 +01:00
pci-acpi.c	Merge branch 'pci/pm' into next	2016-12-12 11:25:04 -06:00
pci-driver.c	PCI: Add a call to pci_assign_irq() in pci_device_probe()	2017-07-02 16:14:28 -05:00
pci-label.c	PCI: Fix broken URL for Dell biosdevname	2016-02-29 12:03:19 -06:00
pci-mid.c	pci-v4.10-changes	2016-12-15 12:46:48 -08:00
pci-stub.c
pci-sysfs.c	Merge branch 'pci/virtualization' into next	2017-04-28 10:36:12 -05:00
pci.c	Merge branch 'pci/virtualization' into next	2017-04-28 10:36:12 -05:00
pci.h	pci-v4.12-changes	2017-05-08 19:03:25 -07:00
probe.c	PCI: Remove pci_scan_root_bus_msi()	2017-07-02 16:14:27 -05:00
proc.c	PCI: Add BAR index argument to pci_mmap_page_range()	2017-04-20 08:47:47 -05:00
quirks.c	Merge branch 'pci/virtualization' into next	2017-04-28 10:36:12 -05:00
remove.c	PCI: Autosense device removal in pci_bridge_d3_update()	2016-11-17 18:44:56 -06:00
rom.c	PCI: Add comments about ROM BAR updating	2016-11-29 18:05:09 -06:00
search.c	PCI: Add device flag PCI_DEV_FLAGS_BRIDGE_XLATE_ROOT	2017-04-13 18:49:50 -05:00
setup-bus.c	PCI: Fix calculation of bridge window's size and alignment	2017-04-18 14:47:20 -05:00
setup-irq.c	PCI: Add pci_assign_irq() function and have pci_fixup_irqs() use it	2017-07-02 16:14:28 -05:00
setup-res.c	PCI: Make PCI_ROM_ADDRESS_MASK a 32-bit constant	2017-04-18 14:46:57 -05:00
slot.c	locking/atomic, kref: Add kref_read()	2017-01-14 11:37:18 +01:00
syscall.c	Replace <asm/uaccess.h> with <linux/uaccess.h> globally	2016-12-24 11:46:01 -08:00
vc.c	PCI: Fix unaligned accesses in VC code	2016-06-20 13:24:20 -05:00
vpd.c
xen-pcifront.c	xen: make use of xenbus_read_unsigned() in xen-pcifront	2016-11-07 13:55:26 +01:00