linux/drivers/usb/input/wacom_sys.c
David Howells 7d12e780e0 IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.

Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 15:10:12 +01:00

309 lines
9.0 KiB
C

/*
* drivers/usb/input/wacom_sys.c
*
* USB Wacom Graphire and Wacom Intuos tablet support - system specific code
*/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include "wacom.h"
#include "wacom_wac.h"
#define USB_REQ_GET_REPORT 0x01
#define USB_REQ_SET_REPORT 0x09
static int usb_get_report(struct usb_interface *intf, unsigned char type,
unsigned char id, void *buf, int size)
{
return usb_control_msg(interface_to_usbdev(intf),
usb_rcvctrlpipe(interface_to_usbdev(intf), 0),
USB_REQ_GET_REPORT, USB_TYPE_CLASS | USB_RECIP_INTERFACE,
(type << 8) + id, intf->altsetting[0].desc.bInterfaceNumber,
buf, size, 100);
}
static int usb_set_report(struct usb_interface *intf, unsigned char type,
unsigned char id, void *buf, int size)
{
return usb_control_msg(interface_to_usbdev(intf),
usb_sndctrlpipe(interface_to_usbdev(intf), 0),
USB_REQ_SET_REPORT, USB_TYPE_CLASS | USB_RECIP_INTERFACE,
(type << 8) + id, intf->altsetting[0].desc.bInterfaceNumber,
buf, size, 1000);
}
static struct input_dev * get_input_dev(struct wacom_combo *wcombo)
{
return wcombo->wacom->dev;
}
void wacom_sys_irq(struct urb *urb)
{
struct wacom *wacom = urb->context;
struct wacom_combo wcombo;
int retval;
switch (urb->status) {
case 0:
/* success */
break;
case -ECONNRESET:
case -ENOENT:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
return;
default:
dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status);
goto exit;
}
wcombo.wacom = wacom;
wcombo.urb = urb;
if (wacom_wac_irq(wacom->wacom_wac, (void *)&wcombo))
input_sync(get_input_dev(&wcombo));
exit:
retval = usb_submit_urb (urb, GFP_ATOMIC);
if (retval)
err ("%s - usb_submit_urb failed with result %d",
__FUNCTION__, retval);
}
void wacom_report_key(void *wcombo, unsigned int key_type, int key_data)
{
input_report_key(get_input_dev((struct wacom_combo *)wcombo), key_type, key_data);
return;
}
void wacom_report_abs(void *wcombo, unsigned int abs_type, int abs_data)
{
input_report_abs(get_input_dev((struct wacom_combo *)wcombo), abs_type, abs_data);
return;
}
void wacom_report_rel(void *wcombo, unsigned int rel_type, int rel_data)
{
input_report_rel(get_input_dev((struct wacom_combo *)wcombo), rel_type, rel_data);
return;
}
void wacom_input_event(void *wcombo, unsigned int type, unsigned int code, int value)
{
input_event(get_input_dev((struct wacom_combo *)wcombo), type, code, value);
return;
}
__u16 wacom_be16_to_cpu(unsigned char *data)
{
__u16 value;
value = be16_to_cpu(*(__be16 *) data);
return value;
}
__u16 wacom_le16_to_cpu(unsigned char *data)
{
__u16 value;
value = be16_to_cpu(*(__be16 *) data);
return value;
}
void wacom_input_sync(void *wcombo)
{
input_sync(get_input_dev((struct wacom_combo *)wcombo));
return;
}
static int wacom_open(struct input_dev *dev)
{
struct wacom *wacom = dev->private;
wacom->irq->dev = wacom->usbdev;
if (usb_submit_urb(wacom->irq, GFP_KERNEL))
return -EIO;
return 0;
}
static void wacom_close(struct input_dev *dev)
{
struct wacom *wacom = dev->private;
usb_kill_urb(wacom->irq);
}
void input_dev_g4(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
input_dev->evbit[0] |= BIT(EV_MSC);
input_dev->mscbit[0] |= BIT(MSC_SERIAL);
input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_FINGER);
input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_0) | BIT(BTN_1) | BIT(BTN_2) | BIT(BTN_3) | BIT(BTN_4) | BIT(BTN_5) | BIT(BTN_6) | BIT(BTN_7);
}
void input_dev_g(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
input_dev->evbit[0] |= BIT(EV_REL);
input_dev->relbit[0] |= BIT(REL_WHEEL);
input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE);
input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER) | BIT(BTN_TOOL_MOUSE) | BIT(BTN_STYLUS2);
input_set_abs_params(input_dev, ABS_DISTANCE, 0, wacom_wac->features->distance_max, 0, 0);
}
void input_dev_i3(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_FINGER);
input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_0) | BIT(BTN_1) | BIT(BTN_2) | BIT(BTN_3) | BIT(BTN_4) | BIT(BTN_5) | BIT(BTN_6) | BIT(BTN_7);
input_set_abs_params(input_dev, ABS_RX, 0, 4097, 0, 0);
input_set_abs_params(input_dev, ABS_RY, 0, 4097, 0, 0);
}
void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
input_dev->evbit[0] |= BIT(EV_MSC) | BIT(EV_REL);
input_dev->mscbit[0] |= BIT(MSC_SERIAL);
input_dev->relbit[0] |= BIT(REL_WHEEL);
input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE) | BIT(BTN_SIDE) | BIT(BTN_EXTRA);
input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER) | BIT(BTN_TOOL_MOUSE) | BIT(BTN_TOOL_BRUSH)
| BIT(BTN_TOOL_PENCIL) | BIT(BTN_TOOL_AIRBRUSH) | BIT(BTN_TOOL_LENS) | BIT(BTN_STYLUS2);
input_set_abs_params(input_dev, ABS_DISTANCE, 0, wacom_wac->features->distance_max, 0, 0);
input_set_abs_params(input_dev, ABS_WHEEL, 0, 1023, 0, 0);
input_set_abs_params(input_dev, ABS_TILT_X, 0, 127, 0, 0);
input_set_abs_params(input_dev, ABS_TILT_Y, 0, 127, 0, 0);
input_set_abs_params(input_dev, ABS_RZ, -900, 899, 0, 0);
input_set_abs_params(input_dev, ABS_THROTTLE, -1023, 1023, 0, 0);
}
void input_dev_pl(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_STYLUS2) | BIT(BTN_TOOL_RUBBER);
}
void input_dev_pt(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER);
}
static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
struct usb_device *dev = interface_to_usbdev(intf);
struct usb_endpoint_descriptor *endpoint;
struct wacom *wacom;
struct wacom_wac *wacom_wac;
struct input_dev *input_dev;
char rep_data[2], limit = 0;
wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL);
wacom_wac = kzalloc(sizeof(struct wacom_wac), GFP_KERNEL);
input_dev = input_allocate_device();
if (!wacom || !input_dev || !wacom_wac)
goto fail1;
wacom_wac->data = usb_buffer_alloc(dev, 10, GFP_KERNEL, &wacom->data_dma);
if (!wacom_wac->data)
goto fail1;
wacom->irq = usb_alloc_urb(0, GFP_KERNEL);
if (!wacom->irq)
goto fail2;
wacom->usbdev = dev;
wacom->dev = input_dev;
usb_make_path(dev, wacom->phys, sizeof(wacom->phys));
strlcat(wacom->phys, "/input0", sizeof(wacom->phys));
wacom_wac->features = get_wacom_feature(id);
if (wacom_wac->features->pktlen > 10)
BUG();
input_dev->name = wacom_wac->features->name;
wacom->wacom_wac = wacom_wac;
usb_to_input_id(dev, &input_dev->id);
input_dev->cdev.dev = &intf->dev;
input_dev->private = wacom;
input_dev->open = wacom_open;
input_dev->close = wacom_close;
input_dev->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS);
input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_PEN) | BIT(BTN_TOUCH) | BIT(BTN_STYLUS);
input_set_abs_params(input_dev, ABS_X, 0, wacom_wac->features->x_max, 4, 0);
input_set_abs_params(input_dev, ABS_Y, 0, wacom_wac->features->y_max, 4, 0);
input_set_abs_params(input_dev, ABS_PRESSURE, 0, wacom_wac->features->pressure_max, 0, 0);
input_dev->absbit[LONG(ABS_MISC)] |= BIT(ABS_MISC);
wacom_init_input_dev(input_dev, wacom_wac);
endpoint = &intf->cur_altsetting->endpoint[0].desc;
usb_fill_int_urb(wacom->irq, dev,
usb_rcvintpipe(dev, endpoint->bEndpointAddress),
wacom_wac->data, wacom_wac->features->pktlen,
wacom_wac->features->irq, wacom, endpoint->bInterval);
wacom->irq->transfer_dma = wacom->data_dma;
wacom->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
input_register_device(wacom->dev);
/* Ask the tablet to report tablet data. Repeat until it succeeds */
do {
rep_data[0] = 2;
rep_data[1] = 2;
usb_set_report(intf, 3, 2, rep_data, 2);
usb_get_report(intf, 3, 2, rep_data, 2);
} while (rep_data[1] != 2 && limit++ < 5);
usb_set_intfdata(intf, wacom);
return 0;
fail2: usb_buffer_free(dev, 10, wacom_wac->data, wacom->data_dma);
fail1: input_free_device(input_dev);
kfree(wacom);
kfree(wacom_wac);
return -ENOMEM;
}
static void wacom_disconnect(struct usb_interface *intf)
{
struct wacom *wacom = usb_get_intfdata (intf);
usb_set_intfdata(intf, NULL);
if (wacom) {
usb_kill_urb(wacom->irq);
input_unregister_device(wacom->dev);
usb_free_urb(wacom->irq);
usb_buffer_free(interface_to_usbdev(intf), 10, wacom->wacom_wac->data, wacom->data_dma);
kfree(wacom);
kfree(wacom->wacom_wac);
}
}
static struct usb_driver wacom_driver = {
.name = "wacom",
.probe = wacom_probe,
.disconnect = wacom_disconnect,
};
static int __init wacom_init(void)
{
int result;
wacom_driver.id_table = get_device_table();
result = usb_register(&wacom_driver);
if (result == 0)
info(DRIVER_VERSION ":" DRIVER_DESC);
return result;
}
static void __exit wacom_exit(void)
{
usb_deregister(&wacom_driver);
}
module_init(wacom_init);
module_exit(wacom_exit);