0
0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-12 21:44:06 +08:00
linux/arch/arm/mach-orion5x/tsx09-common.c
Thomas Gleixner 2874c5fd28 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:32 -07:00

130 lines
2.9 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* QNAP TS-x09 Boards common functions
*
* Maintainers: Lennert Buytenhek <buytenh@marvell.com>
* Byron Bradley <byron.bbradley@gmail.com>
*/
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/mv643xx_eth.h>
#include <linux/timex.h>
#include <linux/serial_reg.h>
#include "orion5x.h"
#include "tsx09-common.h"
#include "common.h"
/*****************************************************************************
* QNAP TS-x09 specific power off method via UART1-attached PIC
****************************************************************************/
#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2))
void qnap_tsx09_power_off(void)
{
/* 19200 baud divisor */
const unsigned divisor = ((orion5x_tclk + (8 * 19200)) / (16 * 19200));
pr_info("%s: triggering power-off...\n", __func__);
/* hijack uart1 and reset into sane state (19200,8n1) */
writel(0x83, UART1_REG(LCR));
writel(divisor & 0xff, UART1_REG(DLL));
writel((divisor >> 8) & 0xff, UART1_REG(DLM));
writel(0x03, UART1_REG(LCR));
writel(0x00, UART1_REG(IER));
writel(0x00, UART1_REG(FCR));
writel(0x00, UART1_REG(MCR));
/* send the power-off command 'A' to PIC */
writel('A', UART1_REG(TX));
}
/*****************************************************************************
* Ethernet
****************************************************************************/
struct mv643xx_eth_platform_data qnap_tsx09_eth_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
};
static int __init qnap_tsx09_parse_hex_nibble(char n)
{
if (n >= '0' && n <= '9')
return n - '0';
if (n >= 'A' && n <= 'F')
return n - 'A' + 10;
if (n >= 'a' && n <= 'f')
return n - 'a' + 10;
return -1;
}
static int __init qnap_tsx09_parse_hex_byte(const char *b)
{
int hi;
int lo;
hi = qnap_tsx09_parse_hex_nibble(b[0]);
lo = qnap_tsx09_parse_hex_nibble(b[1]);
if (hi < 0 || lo < 0)
return -1;
return (hi << 4) | lo;
}
static int __init qnap_tsx09_check_mac_addr(const char *addr_str)
{
u_int8_t addr[6];
int i;
for (i = 0; i < 6; i++) {
int byte;
/*
* Enforce "xx:xx:xx:xx:xx:xx\n" format.
*/
if (addr_str[(i * 3) + 2] != ((i < 5) ? ':' : '\n'))
return -1;
byte = qnap_tsx09_parse_hex_byte(addr_str + (i * 3));
if (byte < 0)
return -1;
addr[i] = byte;
}
printk(KERN_INFO "tsx09: found ethernet mac address %pM\n", addr);
memcpy(qnap_tsx09_eth_data.mac_addr, addr, 6);
return 0;
}
/*
* The 'NAS Config' flash partition has an ext2 filesystem which
* contains a file that has the ethernet MAC address in plain text
* (format "xx:xx:xx:xx:xx:xx\n").
*/
void __init qnap_tsx09_find_mac_addr(u32 mem_base, u32 size)
{
unsigned long addr;
for (addr = mem_base; addr < (mem_base + size); addr += 1024) {
char *nor_page;
int ret = 0;
nor_page = ioremap(addr, 1024);
if (nor_page != NULL) {
ret = qnap_tsx09_check_mac_addr(nor_page);
iounmap(nor_page);
}
if (ret == 0)
break;
}
}