mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-27 21:14:44 +08:00
149c5751e6
Driver needs to avoid PCI writes while OCR is in progress. Use reset_mutex to synchronize between firing DCMDs MR_DCMD_PD_GET_INFO and MR_DCMD_DRV_GET_TARGET_PROP while OCR is triggered. Without this fix, if Device/VD add/creation is in progress and at the same time MR Firmware is going through OCR, user may see OCR never completed and it may need system reboot. This scenario is rare to occur. Fix is provided as part of review. Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
7898 lines
213 KiB
C
7898 lines
213 KiB
C
/*
|
|
* Linux MegaRAID driver for SAS based RAID controllers
|
|
*
|
|
* Copyright (c) 2003-2013 LSI Corporation
|
|
* Copyright (c) 2013-2014 Avago Technologies
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
* Authors: Avago Technologies
|
|
* Sreenivas Bagalkote
|
|
* Sumant Patro
|
|
* Bo Yang
|
|
* Adam Radford
|
|
* Kashyap Desai <kashyap.desai@avagotech.com>
|
|
* Sumit Saxena <sumit.saxena@avagotech.com>
|
|
*
|
|
* Send feedback to: megaraidlinux.pdl@avagotech.com
|
|
*
|
|
* Mail to: Avago Technologies, 350 West Trimble Road, Building 90,
|
|
* San Jose, California 95131
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/list.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/module.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/uio.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/uaccess.h>
|
|
#include <asm/unaligned.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/compat.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/poll.h>
|
|
#include <linux/vmalloc.h>
|
|
|
|
#include <scsi/scsi.h>
|
|
#include <scsi/scsi_cmnd.h>
|
|
#include <scsi/scsi_device.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <scsi/scsi_tcq.h>
|
|
#include "megaraid_sas_fusion.h"
|
|
#include "megaraid_sas.h"
|
|
|
|
/*
|
|
* Number of sectors per IO command
|
|
* Will be set in megasas_init_mfi if user does not provide
|
|
*/
|
|
static unsigned int max_sectors;
|
|
module_param_named(max_sectors, max_sectors, int, 0);
|
|
MODULE_PARM_DESC(max_sectors,
|
|
"Maximum number of sectors per IO command");
|
|
|
|
static int msix_disable;
|
|
module_param(msix_disable, int, S_IRUGO);
|
|
MODULE_PARM_DESC(msix_disable, "Disable MSI-X interrupt handling. Default: 0");
|
|
|
|
static unsigned int msix_vectors;
|
|
module_param(msix_vectors, int, S_IRUGO);
|
|
MODULE_PARM_DESC(msix_vectors, "MSI-X max vector count. Default: Set by FW");
|
|
|
|
static int allow_vf_ioctls;
|
|
module_param(allow_vf_ioctls, int, S_IRUGO);
|
|
MODULE_PARM_DESC(allow_vf_ioctls, "Allow ioctls in SR-IOV VF mode. Default: 0");
|
|
|
|
static unsigned int throttlequeuedepth = MEGASAS_THROTTLE_QUEUE_DEPTH;
|
|
module_param(throttlequeuedepth, int, S_IRUGO);
|
|
MODULE_PARM_DESC(throttlequeuedepth,
|
|
"Adapter queue depth when throttled due to I/O timeout. Default: 16");
|
|
|
|
unsigned int resetwaittime = MEGASAS_RESET_WAIT_TIME;
|
|
module_param(resetwaittime, int, S_IRUGO);
|
|
MODULE_PARM_DESC(resetwaittime, "Wait time in seconds after I/O timeout "
|
|
"before resetting adapter. Default: 180");
|
|
|
|
int smp_affinity_enable = 1;
|
|
module_param(smp_affinity_enable, int, S_IRUGO);
|
|
MODULE_PARM_DESC(smp_affinity_enable, "SMP affinity feature enable/disbale Default: enable(1)");
|
|
|
|
int rdpq_enable = 1;
|
|
module_param(rdpq_enable, int, S_IRUGO);
|
|
MODULE_PARM_DESC(rdpq_enable, " Allocate reply queue in chunks for large queue depth enable/disable Default: disable(0)");
|
|
|
|
unsigned int dual_qdepth_disable;
|
|
module_param(dual_qdepth_disable, int, S_IRUGO);
|
|
MODULE_PARM_DESC(dual_qdepth_disable, "Disable dual queue depth feature. Default: 0");
|
|
|
|
unsigned int scmd_timeout = MEGASAS_DEFAULT_CMD_TIMEOUT;
|
|
module_param(scmd_timeout, int, S_IRUGO);
|
|
MODULE_PARM_DESC(scmd_timeout, "scsi command timeout (10-90s), default 90s. See megasas_reset_timer.");
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_VERSION(MEGASAS_VERSION);
|
|
MODULE_AUTHOR("megaraidlinux.pdl@avagotech.com");
|
|
MODULE_DESCRIPTION("Avago MegaRAID SAS Driver");
|
|
|
|
int megasas_transition_to_ready(struct megasas_instance *instance, int ocr);
|
|
static int megasas_get_pd_list(struct megasas_instance *instance);
|
|
static int megasas_ld_list_query(struct megasas_instance *instance,
|
|
u8 query_type);
|
|
static int megasas_issue_init_mfi(struct megasas_instance *instance);
|
|
static int megasas_register_aen(struct megasas_instance *instance,
|
|
u32 seq_num, u32 class_locale_word);
|
|
static void megasas_get_pd_info(struct megasas_instance *instance,
|
|
struct scsi_device *sdev);
|
|
static int megasas_get_target_prop(struct megasas_instance *instance,
|
|
struct scsi_device *sdev);
|
|
/*
|
|
* PCI ID table for all supported controllers
|
|
*/
|
|
static struct pci_device_id megasas_pci_table[] = {
|
|
|
|
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1064R)},
|
|
/* xscale IOP */
|
|
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1078R)},
|
|
/* ppc IOP */
|
|
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1078DE)},
|
|
/* ppc IOP */
|
|
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1078GEN2)},
|
|
/* gen2*/
|
|
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS0079GEN2)},
|
|
/* gen2*/
|
|
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS0073SKINNY)},
|
|
/* skinny*/
|
|
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS0071SKINNY)},
|
|
/* skinny*/
|
|
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_VERDE_ZCR)},
|
|
/* xscale IOP, vega */
|
|
{PCI_DEVICE(PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_PERC5)},
|
|
/* xscale IOP */
|
|
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FUSION)},
|
|
/* Fusion */
|
|
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_PLASMA)},
|
|
/* Plasma */
|
|
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_INVADER)},
|
|
/* Invader */
|
|
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FURY)},
|
|
/* Fury */
|
|
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_INTRUDER)},
|
|
/* Intruder */
|
|
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_INTRUDER_24)},
|
|
/* Intruder 24 port*/
|
|
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_CUTLASS_52)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_CUTLASS_53)},
|
|
/* VENTURA */
|
|
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_VENTURA)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_CRUSADER)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_HARPOON)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_TOMCAT)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_VENTURA_4PORT)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_CRUSADER_4PORT)},
|
|
{}
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, megasas_pci_table);
|
|
|
|
static int megasas_mgmt_majorno;
|
|
struct megasas_mgmt_info megasas_mgmt_info;
|
|
static struct fasync_struct *megasas_async_queue;
|
|
static DEFINE_MUTEX(megasas_async_queue_mutex);
|
|
|
|
static int megasas_poll_wait_aen;
|
|
static DECLARE_WAIT_QUEUE_HEAD(megasas_poll_wait);
|
|
static u32 support_poll_for_event;
|
|
u32 megasas_dbg_lvl;
|
|
static u32 support_device_change;
|
|
|
|
/* define lock for aen poll */
|
|
spinlock_t poll_aen_lock;
|
|
|
|
void
|
|
megasas_complete_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd,
|
|
u8 alt_status);
|
|
static u32
|
|
megasas_read_fw_status_reg_gen2(struct megasas_register_set __iomem *regs);
|
|
static int
|
|
megasas_adp_reset_gen2(struct megasas_instance *instance,
|
|
struct megasas_register_set __iomem *reg_set);
|
|
static irqreturn_t megasas_isr(int irq, void *devp);
|
|
static u32
|
|
megasas_init_adapter_mfi(struct megasas_instance *instance);
|
|
u32
|
|
megasas_build_and_issue_cmd(struct megasas_instance *instance,
|
|
struct scsi_cmnd *scmd);
|
|
static void megasas_complete_cmd_dpc(unsigned long instance_addr);
|
|
int
|
|
wait_and_poll(struct megasas_instance *instance, struct megasas_cmd *cmd,
|
|
int seconds);
|
|
void megasas_fusion_ocr_wq(struct work_struct *work);
|
|
static int megasas_get_ld_vf_affiliation(struct megasas_instance *instance,
|
|
int initial);
|
|
static int
|
|
megasas_set_dma_mask(struct megasas_instance *instance);
|
|
static int
|
|
megasas_alloc_ctrl_mem(struct megasas_instance *instance);
|
|
static inline void
|
|
megasas_free_ctrl_mem(struct megasas_instance *instance);
|
|
static inline int
|
|
megasas_alloc_ctrl_dma_buffers(struct megasas_instance *instance);
|
|
static inline void
|
|
megasas_free_ctrl_dma_buffers(struct megasas_instance *instance);
|
|
static inline void
|
|
megasas_init_ctrl_params(struct megasas_instance *instance);
|
|
|
|
/**
|
|
* megasas_set_dma_settings - Populate DMA address, length and flags for DCMDs
|
|
* @instance: Adapter soft state
|
|
* @dcmd: DCMD frame inside MFI command
|
|
* @dma_addr: DMA address of buffer to be passed to FW
|
|
* @dma_len: Length of DMA buffer to be passed to FW
|
|
* @return: void
|
|
*/
|
|
void megasas_set_dma_settings(struct megasas_instance *instance,
|
|
struct megasas_dcmd_frame *dcmd,
|
|
dma_addr_t dma_addr, u32 dma_len)
|
|
{
|
|
if (instance->consistent_mask_64bit) {
|
|
dcmd->sgl.sge64[0].phys_addr = cpu_to_le64(dma_addr);
|
|
dcmd->sgl.sge64[0].length = cpu_to_le32(dma_len);
|
|
dcmd->flags = cpu_to_le16(dcmd->flags | MFI_FRAME_SGL64);
|
|
|
|
} else {
|
|
dcmd->sgl.sge32[0].phys_addr =
|
|
cpu_to_le32(lower_32_bits(dma_addr));
|
|
dcmd->sgl.sge32[0].length = cpu_to_le32(dma_len);
|
|
dcmd->flags = cpu_to_le16(dcmd->flags);
|
|
}
|
|
}
|
|
|
|
void
|
|
megasas_issue_dcmd(struct megasas_instance *instance, struct megasas_cmd *cmd)
|
|
{
|
|
instance->instancet->fire_cmd(instance,
|
|
cmd->frame_phys_addr, 0, instance->reg_set);
|
|
return;
|
|
}
|
|
|
|
/**
|
|
* megasas_get_cmd - Get a command from the free pool
|
|
* @instance: Adapter soft state
|
|
*
|
|
* Returns a free command from the pool
|
|
*/
|
|
struct megasas_cmd *megasas_get_cmd(struct megasas_instance
|
|
*instance)
|
|
{
|
|
unsigned long flags;
|
|
struct megasas_cmd *cmd = NULL;
|
|
|
|
spin_lock_irqsave(&instance->mfi_pool_lock, flags);
|
|
|
|
if (!list_empty(&instance->cmd_pool)) {
|
|
cmd = list_entry((&instance->cmd_pool)->next,
|
|
struct megasas_cmd, list);
|
|
list_del_init(&cmd->list);
|
|
} else {
|
|
dev_err(&instance->pdev->dev, "Command pool empty!\n");
|
|
}
|
|
|
|
spin_unlock_irqrestore(&instance->mfi_pool_lock, flags);
|
|
return cmd;
|
|
}
|
|
|
|
/**
|
|
* megasas_return_cmd - Return a cmd to free command pool
|
|
* @instance: Adapter soft state
|
|
* @cmd: Command packet to be returned to free command pool
|
|
*/
|
|
void
|
|
megasas_return_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd)
|
|
{
|
|
unsigned long flags;
|
|
u32 blk_tags;
|
|
struct megasas_cmd_fusion *cmd_fusion;
|
|
struct fusion_context *fusion = instance->ctrl_context;
|
|
|
|
/* This flag is used only for fusion adapter.
|
|
* Wait for Interrupt for Polled mode DCMD
|
|
*/
|
|
if (cmd->flags & DRV_DCMD_POLLED_MODE)
|
|
return;
|
|
|
|
spin_lock_irqsave(&instance->mfi_pool_lock, flags);
|
|
|
|
if (fusion) {
|
|
blk_tags = instance->max_scsi_cmds + cmd->index;
|
|
cmd_fusion = fusion->cmd_list[blk_tags];
|
|
megasas_return_cmd_fusion(instance, cmd_fusion);
|
|
}
|
|
cmd->scmd = NULL;
|
|
cmd->frame_count = 0;
|
|
cmd->flags = 0;
|
|
memset(cmd->frame, 0, instance->mfi_frame_size);
|
|
cmd->frame->io.context = cpu_to_le32(cmd->index);
|
|
if (!fusion && reset_devices)
|
|
cmd->frame->hdr.cmd = MFI_CMD_INVALID;
|
|
list_add(&cmd->list, (&instance->cmd_pool)->next);
|
|
|
|
spin_unlock_irqrestore(&instance->mfi_pool_lock, flags);
|
|
|
|
}
|
|
|
|
static const char *
|
|
format_timestamp(uint32_t timestamp)
|
|
{
|
|
static char buffer[32];
|
|
|
|
if ((timestamp & 0xff000000) == 0xff000000)
|
|
snprintf(buffer, sizeof(buffer), "boot + %us", timestamp &
|
|
0x00ffffff);
|
|
else
|
|
snprintf(buffer, sizeof(buffer), "%us", timestamp);
|
|
return buffer;
|
|
}
|
|
|
|
static const char *
|
|
format_class(int8_t class)
|
|
{
|
|
static char buffer[6];
|
|
|
|
switch (class) {
|
|
case MFI_EVT_CLASS_DEBUG:
|
|
return "debug";
|
|
case MFI_EVT_CLASS_PROGRESS:
|
|
return "progress";
|
|
case MFI_EVT_CLASS_INFO:
|
|
return "info";
|
|
case MFI_EVT_CLASS_WARNING:
|
|
return "WARN";
|
|
case MFI_EVT_CLASS_CRITICAL:
|
|
return "CRIT";
|
|
case MFI_EVT_CLASS_FATAL:
|
|
return "FATAL";
|
|
case MFI_EVT_CLASS_DEAD:
|
|
return "DEAD";
|
|
default:
|
|
snprintf(buffer, sizeof(buffer), "%d", class);
|
|
return buffer;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* megasas_decode_evt: Decode FW AEN event and print critical event
|
|
* for information.
|
|
* @instance: Adapter soft state
|
|
*/
|
|
static void
|
|
megasas_decode_evt(struct megasas_instance *instance)
|
|
{
|
|
struct megasas_evt_detail *evt_detail = instance->evt_detail;
|
|
union megasas_evt_class_locale class_locale;
|
|
class_locale.word = le32_to_cpu(evt_detail->cl.word);
|
|
|
|
if (class_locale.members.class >= MFI_EVT_CLASS_CRITICAL)
|
|
dev_info(&instance->pdev->dev, "%d (%s/0x%04x/%s) - %s\n",
|
|
le32_to_cpu(evt_detail->seq_num),
|
|
format_timestamp(le32_to_cpu(evt_detail->time_stamp)),
|
|
(class_locale.members.locale),
|
|
format_class(class_locale.members.class),
|
|
evt_detail->description);
|
|
}
|
|
|
|
/**
|
|
* The following functions are defined for xscale
|
|
* (deviceid : 1064R, PERC5) controllers
|
|
*/
|
|
|
|
/**
|
|
* megasas_enable_intr_xscale - Enables interrupts
|
|
* @regs: MFI register set
|
|
*/
|
|
static inline void
|
|
megasas_enable_intr_xscale(struct megasas_instance *instance)
|
|
{
|
|
struct megasas_register_set __iomem *regs;
|
|
|
|
regs = instance->reg_set;
|
|
writel(0, &(regs)->outbound_intr_mask);
|
|
|
|
/* Dummy readl to force pci flush */
|
|
readl(®s->outbound_intr_mask);
|
|
}
|
|
|
|
/**
|
|
* megasas_disable_intr_xscale -Disables interrupt
|
|
* @regs: MFI register set
|
|
*/
|
|
static inline void
|
|
megasas_disable_intr_xscale(struct megasas_instance *instance)
|
|
{
|
|
struct megasas_register_set __iomem *regs;
|
|
u32 mask = 0x1f;
|
|
|
|
regs = instance->reg_set;
|
|
writel(mask, ®s->outbound_intr_mask);
|
|
/* Dummy readl to force pci flush */
|
|
readl(®s->outbound_intr_mask);
|
|
}
|
|
|
|
/**
|
|
* megasas_read_fw_status_reg_xscale - returns the current FW status value
|
|
* @regs: MFI register set
|
|
*/
|
|
static u32
|
|
megasas_read_fw_status_reg_xscale(struct megasas_register_set __iomem * regs)
|
|
{
|
|
return readl(&(regs)->outbound_msg_0);
|
|
}
|
|
/**
|
|
* megasas_clear_interrupt_xscale - Check & clear interrupt
|
|
* @regs: MFI register set
|
|
*/
|
|
static int
|
|
megasas_clear_intr_xscale(struct megasas_register_set __iomem * regs)
|
|
{
|
|
u32 status;
|
|
u32 mfiStatus = 0;
|
|
|
|
/*
|
|
* Check if it is our interrupt
|
|
*/
|
|
status = readl(®s->outbound_intr_status);
|
|
|
|
if (status & MFI_OB_INTR_STATUS_MASK)
|
|
mfiStatus = MFI_INTR_FLAG_REPLY_MESSAGE;
|
|
if (status & MFI_XSCALE_OMR0_CHANGE_INTERRUPT)
|
|
mfiStatus |= MFI_INTR_FLAG_FIRMWARE_STATE_CHANGE;
|
|
|
|
/*
|
|
* Clear the interrupt by writing back the same value
|
|
*/
|
|
if (mfiStatus)
|
|
writel(status, ®s->outbound_intr_status);
|
|
|
|
/* Dummy readl to force pci flush */
|
|
readl(®s->outbound_intr_status);
|
|
|
|
return mfiStatus;
|
|
}
|
|
|
|
/**
|
|
* megasas_fire_cmd_xscale - Sends command to the FW
|
|
* @frame_phys_addr : Physical address of cmd
|
|
* @frame_count : Number of frames for the command
|
|
* @regs : MFI register set
|
|
*/
|
|
static inline void
|
|
megasas_fire_cmd_xscale(struct megasas_instance *instance,
|
|
dma_addr_t frame_phys_addr,
|
|
u32 frame_count,
|
|
struct megasas_register_set __iomem *regs)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&instance->hba_lock, flags);
|
|
writel((frame_phys_addr >> 3)|(frame_count),
|
|
&(regs)->inbound_queue_port);
|
|
spin_unlock_irqrestore(&instance->hba_lock, flags);
|
|
}
|
|
|
|
/**
|
|
* megasas_adp_reset_xscale - For controller reset
|
|
* @regs: MFI register set
|
|
*/
|
|
static int
|
|
megasas_adp_reset_xscale(struct megasas_instance *instance,
|
|
struct megasas_register_set __iomem *regs)
|
|
{
|
|
u32 i;
|
|
u32 pcidata;
|
|
|
|
writel(MFI_ADP_RESET, ®s->inbound_doorbell);
|
|
|
|
for (i = 0; i < 3; i++)
|
|
msleep(1000); /* sleep for 3 secs */
|
|
pcidata = 0;
|
|
pci_read_config_dword(instance->pdev, MFI_1068_PCSR_OFFSET, &pcidata);
|
|
dev_notice(&instance->pdev->dev, "pcidata = %x\n", pcidata);
|
|
if (pcidata & 0x2) {
|
|
dev_notice(&instance->pdev->dev, "mfi 1068 offset read=%x\n", pcidata);
|
|
pcidata &= ~0x2;
|
|
pci_write_config_dword(instance->pdev,
|
|
MFI_1068_PCSR_OFFSET, pcidata);
|
|
|
|
for (i = 0; i < 2; i++)
|
|
msleep(1000); /* need to wait 2 secs again */
|
|
|
|
pcidata = 0;
|
|
pci_read_config_dword(instance->pdev,
|
|
MFI_1068_FW_HANDSHAKE_OFFSET, &pcidata);
|
|
dev_notice(&instance->pdev->dev, "1068 offset handshake read=%x\n", pcidata);
|
|
if ((pcidata & 0xffff0000) == MFI_1068_FW_READY) {
|
|
dev_notice(&instance->pdev->dev, "1068 offset pcidt=%x\n", pcidata);
|
|
pcidata = 0;
|
|
pci_write_config_dword(instance->pdev,
|
|
MFI_1068_FW_HANDSHAKE_OFFSET, pcidata);
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* megasas_check_reset_xscale - For controller reset check
|
|
* @regs: MFI register set
|
|
*/
|
|
static int
|
|
megasas_check_reset_xscale(struct megasas_instance *instance,
|
|
struct megasas_register_set __iomem *regs)
|
|
{
|
|
if ((atomic_read(&instance->adprecovery) != MEGASAS_HBA_OPERATIONAL) &&
|
|
(le32_to_cpu(*instance->consumer) ==
|
|
MEGASAS_ADPRESET_INPROG_SIGN))
|
|
return 1;
|
|
return 0;
|
|
}
|
|
|
|
static struct megasas_instance_template megasas_instance_template_xscale = {
|
|
|
|
.fire_cmd = megasas_fire_cmd_xscale,
|
|
.enable_intr = megasas_enable_intr_xscale,
|
|
.disable_intr = megasas_disable_intr_xscale,
|
|
.clear_intr = megasas_clear_intr_xscale,
|
|
.read_fw_status_reg = megasas_read_fw_status_reg_xscale,
|
|
.adp_reset = megasas_adp_reset_xscale,
|
|
.check_reset = megasas_check_reset_xscale,
|
|
.service_isr = megasas_isr,
|
|
.tasklet = megasas_complete_cmd_dpc,
|
|
.init_adapter = megasas_init_adapter_mfi,
|
|
.build_and_issue_cmd = megasas_build_and_issue_cmd,
|
|
.issue_dcmd = megasas_issue_dcmd,
|
|
};
|
|
|
|
/**
|
|
* This is the end of set of functions & definitions specific
|
|
* to xscale (deviceid : 1064R, PERC5) controllers
|
|
*/
|
|
|
|
/**
|
|
* The following functions are defined for ppc (deviceid : 0x60)
|
|
* controllers
|
|
*/
|
|
|
|
/**
|
|
* megasas_enable_intr_ppc - Enables interrupts
|
|
* @regs: MFI register set
|
|
*/
|
|
static inline void
|
|
megasas_enable_intr_ppc(struct megasas_instance *instance)
|
|
{
|
|
struct megasas_register_set __iomem *regs;
|
|
|
|
regs = instance->reg_set;
|
|
writel(0xFFFFFFFF, &(regs)->outbound_doorbell_clear);
|
|
|
|
writel(~0x80000000, &(regs)->outbound_intr_mask);
|
|
|
|
/* Dummy readl to force pci flush */
|
|
readl(®s->outbound_intr_mask);
|
|
}
|
|
|
|
/**
|
|
* megasas_disable_intr_ppc - Disable interrupt
|
|
* @regs: MFI register set
|
|
*/
|
|
static inline void
|
|
megasas_disable_intr_ppc(struct megasas_instance *instance)
|
|
{
|
|
struct megasas_register_set __iomem *regs;
|
|
u32 mask = 0xFFFFFFFF;
|
|
|
|
regs = instance->reg_set;
|
|
writel(mask, ®s->outbound_intr_mask);
|
|
/* Dummy readl to force pci flush */
|
|
readl(®s->outbound_intr_mask);
|
|
}
|
|
|
|
/**
|
|
* megasas_read_fw_status_reg_ppc - returns the current FW status value
|
|
* @regs: MFI register set
|
|
*/
|
|
static u32
|
|
megasas_read_fw_status_reg_ppc(struct megasas_register_set __iomem * regs)
|
|
{
|
|
return readl(&(regs)->outbound_scratch_pad);
|
|
}
|
|
|
|
/**
|
|
* megasas_clear_interrupt_ppc - Check & clear interrupt
|
|
* @regs: MFI register set
|
|
*/
|
|
static int
|
|
megasas_clear_intr_ppc(struct megasas_register_set __iomem * regs)
|
|
{
|
|
u32 status, mfiStatus = 0;
|
|
|
|
/*
|
|
* Check if it is our interrupt
|
|
*/
|
|
status = readl(®s->outbound_intr_status);
|
|
|
|
if (status & MFI_REPLY_1078_MESSAGE_INTERRUPT)
|
|
mfiStatus = MFI_INTR_FLAG_REPLY_MESSAGE;
|
|
|
|
if (status & MFI_G2_OUTBOUND_DOORBELL_CHANGE_INTERRUPT)
|
|
mfiStatus |= MFI_INTR_FLAG_FIRMWARE_STATE_CHANGE;
|
|
|
|
/*
|
|
* Clear the interrupt by writing back the same value
|
|
*/
|
|
writel(status, ®s->outbound_doorbell_clear);
|
|
|
|
/* Dummy readl to force pci flush */
|
|
readl(®s->outbound_doorbell_clear);
|
|
|
|
return mfiStatus;
|
|
}
|
|
|
|
/**
|
|
* megasas_fire_cmd_ppc - Sends command to the FW
|
|
* @frame_phys_addr : Physical address of cmd
|
|
* @frame_count : Number of frames for the command
|
|
* @regs : MFI register set
|
|
*/
|
|
static inline void
|
|
megasas_fire_cmd_ppc(struct megasas_instance *instance,
|
|
dma_addr_t frame_phys_addr,
|
|
u32 frame_count,
|
|
struct megasas_register_set __iomem *regs)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&instance->hba_lock, flags);
|
|
writel((frame_phys_addr | (frame_count<<1))|1,
|
|
&(regs)->inbound_queue_port);
|
|
spin_unlock_irqrestore(&instance->hba_lock, flags);
|
|
}
|
|
|
|
/**
|
|
* megasas_check_reset_ppc - For controller reset check
|
|
* @regs: MFI register set
|
|
*/
|
|
static int
|
|
megasas_check_reset_ppc(struct megasas_instance *instance,
|
|
struct megasas_register_set __iomem *regs)
|
|
{
|
|
if (atomic_read(&instance->adprecovery) != MEGASAS_HBA_OPERATIONAL)
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct megasas_instance_template megasas_instance_template_ppc = {
|
|
|
|
.fire_cmd = megasas_fire_cmd_ppc,
|
|
.enable_intr = megasas_enable_intr_ppc,
|
|
.disable_intr = megasas_disable_intr_ppc,
|
|
.clear_intr = megasas_clear_intr_ppc,
|
|
.read_fw_status_reg = megasas_read_fw_status_reg_ppc,
|
|
.adp_reset = megasas_adp_reset_xscale,
|
|
.check_reset = megasas_check_reset_ppc,
|
|
.service_isr = megasas_isr,
|
|
.tasklet = megasas_complete_cmd_dpc,
|
|
.init_adapter = megasas_init_adapter_mfi,
|
|
.build_and_issue_cmd = megasas_build_and_issue_cmd,
|
|
.issue_dcmd = megasas_issue_dcmd,
|
|
};
|
|
|
|
/**
|
|
* megasas_enable_intr_skinny - Enables interrupts
|
|
* @regs: MFI register set
|
|
*/
|
|
static inline void
|
|
megasas_enable_intr_skinny(struct megasas_instance *instance)
|
|
{
|
|
struct megasas_register_set __iomem *regs;
|
|
|
|
regs = instance->reg_set;
|
|
writel(0xFFFFFFFF, &(regs)->outbound_intr_mask);
|
|
|
|
writel(~MFI_SKINNY_ENABLE_INTERRUPT_MASK, &(regs)->outbound_intr_mask);
|
|
|
|
/* Dummy readl to force pci flush */
|
|
readl(®s->outbound_intr_mask);
|
|
}
|
|
|
|
/**
|
|
* megasas_disable_intr_skinny - Disables interrupt
|
|
* @regs: MFI register set
|
|
*/
|
|
static inline void
|
|
megasas_disable_intr_skinny(struct megasas_instance *instance)
|
|
{
|
|
struct megasas_register_set __iomem *regs;
|
|
u32 mask = 0xFFFFFFFF;
|
|
|
|
regs = instance->reg_set;
|
|
writel(mask, ®s->outbound_intr_mask);
|
|
/* Dummy readl to force pci flush */
|
|
readl(®s->outbound_intr_mask);
|
|
}
|
|
|
|
/**
|
|
* megasas_read_fw_status_reg_skinny - returns the current FW status value
|
|
* @regs: MFI register set
|
|
*/
|
|
static u32
|
|
megasas_read_fw_status_reg_skinny(struct megasas_register_set __iomem *regs)
|
|
{
|
|
return readl(&(regs)->outbound_scratch_pad);
|
|
}
|
|
|
|
/**
|
|
* megasas_clear_interrupt_skinny - Check & clear interrupt
|
|
* @regs: MFI register set
|
|
*/
|
|
static int
|
|
megasas_clear_intr_skinny(struct megasas_register_set __iomem *regs)
|
|
{
|
|
u32 status;
|
|
u32 mfiStatus = 0;
|
|
|
|
/*
|
|
* Check if it is our interrupt
|
|
*/
|
|
status = readl(®s->outbound_intr_status);
|
|
|
|
if (!(status & MFI_SKINNY_ENABLE_INTERRUPT_MASK)) {
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Check if it is our interrupt
|
|
*/
|
|
if ((megasas_read_fw_status_reg_skinny(regs) & MFI_STATE_MASK) ==
|
|
MFI_STATE_FAULT) {
|
|
mfiStatus = MFI_INTR_FLAG_FIRMWARE_STATE_CHANGE;
|
|
} else
|
|
mfiStatus = MFI_INTR_FLAG_REPLY_MESSAGE;
|
|
|
|
/*
|
|
* Clear the interrupt by writing back the same value
|
|
*/
|
|
writel(status, ®s->outbound_intr_status);
|
|
|
|
/*
|
|
* dummy read to flush PCI
|
|
*/
|
|
readl(®s->outbound_intr_status);
|
|
|
|
return mfiStatus;
|
|
}
|
|
|
|
/**
|
|
* megasas_fire_cmd_skinny - Sends command to the FW
|
|
* @frame_phys_addr : Physical address of cmd
|
|
* @frame_count : Number of frames for the command
|
|
* @regs : MFI register set
|
|
*/
|
|
static inline void
|
|
megasas_fire_cmd_skinny(struct megasas_instance *instance,
|
|
dma_addr_t frame_phys_addr,
|
|
u32 frame_count,
|
|
struct megasas_register_set __iomem *regs)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&instance->hba_lock, flags);
|
|
writel(upper_32_bits(frame_phys_addr),
|
|
&(regs)->inbound_high_queue_port);
|
|
writel((lower_32_bits(frame_phys_addr) | (frame_count<<1))|1,
|
|
&(regs)->inbound_low_queue_port);
|
|
mmiowb();
|
|
spin_unlock_irqrestore(&instance->hba_lock, flags);
|
|
}
|
|
|
|
/**
|
|
* megasas_check_reset_skinny - For controller reset check
|
|
* @regs: MFI register set
|
|
*/
|
|
static int
|
|
megasas_check_reset_skinny(struct megasas_instance *instance,
|
|
struct megasas_register_set __iomem *regs)
|
|
{
|
|
if (atomic_read(&instance->adprecovery) != MEGASAS_HBA_OPERATIONAL)
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct megasas_instance_template megasas_instance_template_skinny = {
|
|
|
|
.fire_cmd = megasas_fire_cmd_skinny,
|
|
.enable_intr = megasas_enable_intr_skinny,
|
|
.disable_intr = megasas_disable_intr_skinny,
|
|
.clear_intr = megasas_clear_intr_skinny,
|
|
.read_fw_status_reg = megasas_read_fw_status_reg_skinny,
|
|
.adp_reset = megasas_adp_reset_gen2,
|
|
.check_reset = megasas_check_reset_skinny,
|
|
.service_isr = megasas_isr,
|
|
.tasklet = megasas_complete_cmd_dpc,
|
|
.init_adapter = megasas_init_adapter_mfi,
|
|
.build_and_issue_cmd = megasas_build_and_issue_cmd,
|
|
.issue_dcmd = megasas_issue_dcmd,
|
|
};
|
|
|
|
|
|
/**
|
|
* The following functions are defined for gen2 (deviceid : 0x78 0x79)
|
|
* controllers
|
|
*/
|
|
|
|
/**
|
|
* megasas_enable_intr_gen2 - Enables interrupts
|
|
* @regs: MFI register set
|
|
*/
|
|
static inline void
|
|
megasas_enable_intr_gen2(struct megasas_instance *instance)
|
|
{
|
|
struct megasas_register_set __iomem *regs;
|
|
|
|
regs = instance->reg_set;
|
|
writel(0xFFFFFFFF, &(regs)->outbound_doorbell_clear);
|
|
|
|
/* write ~0x00000005 (4 & 1) to the intr mask*/
|
|
writel(~MFI_GEN2_ENABLE_INTERRUPT_MASK, &(regs)->outbound_intr_mask);
|
|
|
|
/* Dummy readl to force pci flush */
|
|
readl(®s->outbound_intr_mask);
|
|
}
|
|
|
|
/**
|
|
* megasas_disable_intr_gen2 - Disables interrupt
|
|
* @regs: MFI register set
|
|
*/
|
|
static inline void
|
|
megasas_disable_intr_gen2(struct megasas_instance *instance)
|
|
{
|
|
struct megasas_register_set __iomem *regs;
|
|
u32 mask = 0xFFFFFFFF;
|
|
|
|
regs = instance->reg_set;
|
|
writel(mask, ®s->outbound_intr_mask);
|
|
/* Dummy readl to force pci flush */
|
|
readl(®s->outbound_intr_mask);
|
|
}
|
|
|
|
/**
|
|
* megasas_read_fw_status_reg_gen2 - returns the current FW status value
|
|
* @regs: MFI register set
|
|
*/
|
|
static u32
|
|
megasas_read_fw_status_reg_gen2(struct megasas_register_set __iomem *regs)
|
|
{
|
|
return readl(&(regs)->outbound_scratch_pad);
|
|
}
|
|
|
|
/**
|
|
* megasas_clear_interrupt_gen2 - Check & clear interrupt
|
|
* @regs: MFI register set
|
|
*/
|
|
static int
|
|
megasas_clear_intr_gen2(struct megasas_register_set __iomem *regs)
|
|
{
|
|
u32 status;
|
|
u32 mfiStatus = 0;
|
|
|
|
/*
|
|
* Check if it is our interrupt
|
|
*/
|
|
status = readl(®s->outbound_intr_status);
|
|
|
|
if (status & MFI_INTR_FLAG_REPLY_MESSAGE) {
|
|
mfiStatus = MFI_INTR_FLAG_REPLY_MESSAGE;
|
|
}
|
|
if (status & MFI_G2_OUTBOUND_DOORBELL_CHANGE_INTERRUPT) {
|
|
mfiStatus |= MFI_INTR_FLAG_FIRMWARE_STATE_CHANGE;
|
|
}
|
|
|
|
/*
|
|
* Clear the interrupt by writing back the same value
|
|
*/
|
|
if (mfiStatus)
|
|
writel(status, ®s->outbound_doorbell_clear);
|
|
|
|
/* Dummy readl to force pci flush */
|
|
readl(®s->outbound_intr_status);
|
|
|
|
return mfiStatus;
|
|
}
|
|
/**
|
|
* megasas_fire_cmd_gen2 - Sends command to the FW
|
|
* @frame_phys_addr : Physical address of cmd
|
|
* @frame_count : Number of frames for the command
|
|
* @regs : MFI register set
|
|
*/
|
|
static inline void
|
|
megasas_fire_cmd_gen2(struct megasas_instance *instance,
|
|
dma_addr_t frame_phys_addr,
|
|
u32 frame_count,
|
|
struct megasas_register_set __iomem *regs)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&instance->hba_lock, flags);
|
|
writel((frame_phys_addr | (frame_count<<1))|1,
|
|
&(regs)->inbound_queue_port);
|
|
spin_unlock_irqrestore(&instance->hba_lock, flags);
|
|
}
|
|
|
|
/**
|
|
* megasas_adp_reset_gen2 - For controller reset
|
|
* @regs: MFI register set
|
|
*/
|
|
static int
|
|
megasas_adp_reset_gen2(struct megasas_instance *instance,
|
|
struct megasas_register_set __iomem *reg_set)
|
|
{
|
|
u32 retry = 0 ;
|
|
u32 HostDiag;
|
|
u32 __iomem *seq_offset = ®_set->seq_offset;
|
|
u32 __iomem *hostdiag_offset = ®_set->host_diag;
|
|
|
|
if (instance->instancet == &megasas_instance_template_skinny) {
|
|
seq_offset = ®_set->fusion_seq_offset;
|
|
hostdiag_offset = ®_set->fusion_host_diag;
|
|
}
|
|
|
|
writel(0, seq_offset);
|
|
writel(4, seq_offset);
|
|
writel(0xb, seq_offset);
|
|
writel(2, seq_offset);
|
|
writel(7, seq_offset);
|
|
writel(0xd, seq_offset);
|
|
|
|
msleep(1000);
|
|
|
|
HostDiag = (u32)readl(hostdiag_offset);
|
|
|
|
while (!(HostDiag & DIAG_WRITE_ENABLE)) {
|
|
msleep(100);
|
|
HostDiag = (u32)readl(hostdiag_offset);
|
|
dev_notice(&instance->pdev->dev, "RESETGEN2: retry=%x, hostdiag=%x\n",
|
|
retry, HostDiag);
|
|
|
|
if (retry++ >= 100)
|
|
return 1;
|
|
|
|
}
|
|
|
|
dev_notice(&instance->pdev->dev, "ADP_RESET_GEN2: HostDiag=%x\n", HostDiag);
|
|
|
|
writel((HostDiag | DIAG_RESET_ADAPTER), hostdiag_offset);
|
|
|
|
ssleep(10);
|
|
|
|
HostDiag = (u32)readl(hostdiag_offset);
|
|
while (HostDiag & DIAG_RESET_ADAPTER) {
|
|
msleep(100);
|
|
HostDiag = (u32)readl(hostdiag_offset);
|
|
dev_notice(&instance->pdev->dev, "RESET_GEN2: retry=%x, hostdiag=%x\n",
|
|
retry, HostDiag);
|
|
|
|
if (retry++ >= 1000)
|
|
return 1;
|
|
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* megasas_check_reset_gen2 - For controller reset check
|
|
* @regs: MFI register set
|
|
*/
|
|
static int
|
|
megasas_check_reset_gen2(struct megasas_instance *instance,
|
|
struct megasas_register_set __iomem *regs)
|
|
{
|
|
if (atomic_read(&instance->adprecovery) != MEGASAS_HBA_OPERATIONAL)
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct megasas_instance_template megasas_instance_template_gen2 = {
|
|
|
|
.fire_cmd = megasas_fire_cmd_gen2,
|
|
.enable_intr = megasas_enable_intr_gen2,
|
|
.disable_intr = megasas_disable_intr_gen2,
|
|
.clear_intr = megasas_clear_intr_gen2,
|
|
.read_fw_status_reg = megasas_read_fw_status_reg_gen2,
|
|
.adp_reset = megasas_adp_reset_gen2,
|
|
.check_reset = megasas_check_reset_gen2,
|
|
.service_isr = megasas_isr,
|
|
.tasklet = megasas_complete_cmd_dpc,
|
|
.init_adapter = megasas_init_adapter_mfi,
|
|
.build_and_issue_cmd = megasas_build_and_issue_cmd,
|
|
.issue_dcmd = megasas_issue_dcmd,
|
|
};
|
|
|
|
/**
|
|
* This is the end of set of functions & definitions
|
|
* specific to gen2 (deviceid : 0x78, 0x79) controllers
|
|
*/
|
|
|
|
/*
|
|
* Template added for TB (Fusion)
|
|
*/
|
|
extern struct megasas_instance_template megasas_instance_template_fusion;
|
|
|
|
/**
|
|
* megasas_issue_polled - Issues a polling command
|
|
* @instance: Adapter soft state
|
|
* @cmd: Command packet to be issued
|
|
*
|
|
* For polling, MFI requires the cmd_status to be set to MFI_STAT_INVALID_STATUS before posting.
|
|
*/
|
|
int
|
|
megasas_issue_polled(struct megasas_instance *instance, struct megasas_cmd *cmd)
|
|
{
|
|
struct megasas_header *frame_hdr = &cmd->frame->hdr;
|
|
|
|
frame_hdr->cmd_status = MFI_STAT_INVALID_STATUS;
|
|
frame_hdr->flags |= cpu_to_le16(MFI_FRAME_DONT_POST_IN_REPLY_QUEUE);
|
|
|
|
if (atomic_read(&instance->adprecovery) == MEGASAS_HW_CRITICAL_ERROR) {
|
|
dev_err(&instance->pdev->dev, "Failed from %s %d\n",
|
|
__func__, __LINE__);
|
|
return DCMD_NOT_FIRED;
|
|
}
|
|
|
|
instance->instancet->issue_dcmd(instance, cmd);
|
|
|
|
return wait_and_poll(instance, cmd, instance->requestorId ?
|
|
MEGASAS_ROUTINE_WAIT_TIME_VF : MFI_IO_TIMEOUT_SECS);
|
|
}
|
|
|
|
/**
|
|
* megasas_issue_blocked_cmd - Synchronous wrapper around regular FW cmds
|
|
* @instance: Adapter soft state
|
|
* @cmd: Command to be issued
|
|
* @timeout: Timeout in seconds
|
|
*
|
|
* This function waits on an event for the command to be returned from ISR.
|
|
* Max wait time is MEGASAS_INTERNAL_CMD_WAIT_TIME secs
|
|
* Used to issue ioctl commands.
|
|
*/
|
|
int
|
|
megasas_issue_blocked_cmd(struct megasas_instance *instance,
|
|
struct megasas_cmd *cmd, int timeout)
|
|
{
|
|
int ret = 0;
|
|
cmd->cmd_status_drv = MFI_STAT_INVALID_STATUS;
|
|
|
|
if (atomic_read(&instance->adprecovery) == MEGASAS_HW_CRITICAL_ERROR) {
|
|
dev_err(&instance->pdev->dev, "Failed from %s %d\n",
|
|
__func__, __LINE__);
|
|
return DCMD_NOT_FIRED;
|
|
}
|
|
|
|
instance->instancet->issue_dcmd(instance, cmd);
|
|
|
|
if (timeout) {
|
|
ret = wait_event_timeout(instance->int_cmd_wait_q,
|
|
cmd->cmd_status_drv != MFI_STAT_INVALID_STATUS, timeout * HZ);
|
|
if (!ret) {
|
|
dev_err(&instance->pdev->dev, "Failed from %s %d DCMD Timed out\n",
|
|
__func__, __LINE__);
|
|
return DCMD_TIMEOUT;
|
|
}
|
|
} else
|
|
wait_event(instance->int_cmd_wait_q,
|
|
cmd->cmd_status_drv != MFI_STAT_INVALID_STATUS);
|
|
|
|
return (cmd->cmd_status_drv == MFI_STAT_OK) ?
|
|
DCMD_SUCCESS : DCMD_FAILED;
|
|
}
|
|
|
|
/**
|
|
* megasas_issue_blocked_abort_cmd - Aborts previously issued cmd
|
|
* @instance: Adapter soft state
|
|
* @cmd_to_abort: Previously issued cmd to be aborted
|
|
* @timeout: Timeout in seconds
|
|
*
|
|
* MFI firmware can abort previously issued AEN comamnd (automatic event
|
|
* notification). The megasas_issue_blocked_abort_cmd() issues such abort
|
|
* cmd and waits for return status.
|
|
* Max wait time is MEGASAS_INTERNAL_CMD_WAIT_TIME secs
|
|
*/
|
|
static int
|
|
megasas_issue_blocked_abort_cmd(struct megasas_instance *instance,
|
|
struct megasas_cmd *cmd_to_abort, int timeout)
|
|
{
|
|
struct megasas_cmd *cmd;
|
|
struct megasas_abort_frame *abort_fr;
|
|
int ret = 0;
|
|
|
|
cmd = megasas_get_cmd(instance);
|
|
|
|
if (!cmd)
|
|
return -1;
|
|
|
|
abort_fr = &cmd->frame->abort;
|
|
|
|
/*
|
|
* Prepare and issue the abort frame
|
|
*/
|
|
abort_fr->cmd = MFI_CMD_ABORT;
|
|
abort_fr->cmd_status = MFI_STAT_INVALID_STATUS;
|
|
abort_fr->flags = cpu_to_le16(0);
|
|
abort_fr->abort_context = cpu_to_le32(cmd_to_abort->index);
|
|
abort_fr->abort_mfi_phys_addr_lo =
|
|
cpu_to_le32(lower_32_bits(cmd_to_abort->frame_phys_addr));
|
|
abort_fr->abort_mfi_phys_addr_hi =
|
|
cpu_to_le32(upper_32_bits(cmd_to_abort->frame_phys_addr));
|
|
|
|
cmd->sync_cmd = 1;
|
|
cmd->cmd_status_drv = MFI_STAT_INVALID_STATUS;
|
|
|
|
if (atomic_read(&instance->adprecovery) == MEGASAS_HW_CRITICAL_ERROR) {
|
|
dev_err(&instance->pdev->dev, "Failed from %s %d\n",
|
|
__func__, __LINE__);
|
|
return DCMD_NOT_FIRED;
|
|
}
|
|
|
|
instance->instancet->issue_dcmd(instance, cmd);
|
|
|
|
if (timeout) {
|
|
ret = wait_event_timeout(instance->abort_cmd_wait_q,
|
|
cmd->cmd_status_drv != MFI_STAT_INVALID_STATUS, timeout * HZ);
|
|
if (!ret) {
|
|
dev_err(&instance->pdev->dev, "Failed from %s %d Abort Timed out\n",
|
|
__func__, __LINE__);
|
|
return DCMD_TIMEOUT;
|
|
}
|
|
} else
|
|
wait_event(instance->abort_cmd_wait_q,
|
|
cmd->cmd_status_drv != MFI_STAT_INVALID_STATUS);
|
|
|
|
cmd->sync_cmd = 0;
|
|
|
|
megasas_return_cmd(instance, cmd);
|
|
return (cmd->cmd_status_drv == MFI_STAT_OK) ?
|
|
DCMD_SUCCESS : DCMD_FAILED;
|
|
}
|
|
|
|
/**
|
|
* megasas_make_sgl32 - Prepares 32-bit SGL
|
|
* @instance: Adapter soft state
|
|
* @scp: SCSI command from the mid-layer
|
|
* @mfi_sgl: SGL to be filled in
|
|
*
|
|
* If successful, this function returns the number of SG elements. Otherwise,
|
|
* it returnes -1.
|
|
*/
|
|
static int
|
|
megasas_make_sgl32(struct megasas_instance *instance, struct scsi_cmnd *scp,
|
|
union megasas_sgl *mfi_sgl)
|
|
{
|
|
int i;
|
|
int sge_count;
|
|
struct scatterlist *os_sgl;
|
|
|
|
sge_count = scsi_dma_map(scp);
|
|
BUG_ON(sge_count < 0);
|
|
|
|
if (sge_count) {
|
|
scsi_for_each_sg(scp, os_sgl, sge_count, i) {
|
|
mfi_sgl->sge32[i].length = cpu_to_le32(sg_dma_len(os_sgl));
|
|
mfi_sgl->sge32[i].phys_addr = cpu_to_le32(sg_dma_address(os_sgl));
|
|
}
|
|
}
|
|
return sge_count;
|
|
}
|
|
|
|
/**
|
|
* megasas_make_sgl64 - Prepares 64-bit SGL
|
|
* @instance: Adapter soft state
|
|
* @scp: SCSI command from the mid-layer
|
|
* @mfi_sgl: SGL to be filled in
|
|
*
|
|
* If successful, this function returns the number of SG elements. Otherwise,
|
|
* it returnes -1.
|
|
*/
|
|
static int
|
|
megasas_make_sgl64(struct megasas_instance *instance, struct scsi_cmnd *scp,
|
|
union megasas_sgl *mfi_sgl)
|
|
{
|
|
int i;
|
|
int sge_count;
|
|
struct scatterlist *os_sgl;
|
|
|
|
sge_count = scsi_dma_map(scp);
|
|
BUG_ON(sge_count < 0);
|
|
|
|
if (sge_count) {
|
|
scsi_for_each_sg(scp, os_sgl, sge_count, i) {
|
|
mfi_sgl->sge64[i].length = cpu_to_le32(sg_dma_len(os_sgl));
|
|
mfi_sgl->sge64[i].phys_addr = cpu_to_le64(sg_dma_address(os_sgl));
|
|
}
|
|
}
|
|
return sge_count;
|
|
}
|
|
|
|
/**
|
|
* megasas_make_sgl_skinny - Prepares IEEE SGL
|
|
* @instance: Adapter soft state
|
|
* @scp: SCSI command from the mid-layer
|
|
* @mfi_sgl: SGL to be filled in
|
|
*
|
|
* If successful, this function returns the number of SG elements. Otherwise,
|
|
* it returnes -1.
|
|
*/
|
|
static int
|
|
megasas_make_sgl_skinny(struct megasas_instance *instance,
|
|
struct scsi_cmnd *scp, union megasas_sgl *mfi_sgl)
|
|
{
|
|
int i;
|
|
int sge_count;
|
|
struct scatterlist *os_sgl;
|
|
|
|
sge_count = scsi_dma_map(scp);
|
|
|
|
if (sge_count) {
|
|
scsi_for_each_sg(scp, os_sgl, sge_count, i) {
|
|
mfi_sgl->sge_skinny[i].length =
|
|
cpu_to_le32(sg_dma_len(os_sgl));
|
|
mfi_sgl->sge_skinny[i].phys_addr =
|
|
cpu_to_le64(sg_dma_address(os_sgl));
|
|
mfi_sgl->sge_skinny[i].flag = cpu_to_le32(0);
|
|
}
|
|
}
|
|
return sge_count;
|
|
}
|
|
|
|
/**
|
|
* megasas_get_frame_count - Computes the number of frames
|
|
* @frame_type : type of frame- io or pthru frame
|
|
* @sge_count : number of sg elements
|
|
*
|
|
* Returns the number of frames required for numnber of sge's (sge_count)
|
|
*/
|
|
|
|
static u32 megasas_get_frame_count(struct megasas_instance *instance,
|
|
u8 sge_count, u8 frame_type)
|
|
{
|
|
int num_cnt;
|
|
int sge_bytes;
|
|
u32 sge_sz;
|
|
u32 frame_count = 0;
|
|
|
|
sge_sz = (IS_DMA64) ? sizeof(struct megasas_sge64) :
|
|
sizeof(struct megasas_sge32);
|
|
|
|
if (instance->flag_ieee) {
|
|
sge_sz = sizeof(struct megasas_sge_skinny);
|
|
}
|
|
|
|
/*
|
|
* Main frame can contain 2 SGEs for 64-bit SGLs and
|
|
* 3 SGEs for 32-bit SGLs for ldio &
|
|
* 1 SGEs for 64-bit SGLs and
|
|
* 2 SGEs for 32-bit SGLs for pthru frame
|
|
*/
|
|
if (unlikely(frame_type == PTHRU_FRAME)) {
|
|
if (instance->flag_ieee == 1) {
|
|
num_cnt = sge_count - 1;
|
|
} else if (IS_DMA64)
|
|
num_cnt = sge_count - 1;
|
|
else
|
|
num_cnt = sge_count - 2;
|
|
} else {
|
|
if (instance->flag_ieee == 1) {
|
|
num_cnt = sge_count - 1;
|
|
} else if (IS_DMA64)
|
|
num_cnt = sge_count - 2;
|
|
else
|
|
num_cnt = sge_count - 3;
|
|
}
|
|
|
|
if (num_cnt > 0) {
|
|
sge_bytes = sge_sz * num_cnt;
|
|
|
|
frame_count = (sge_bytes / MEGAMFI_FRAME_SIZE) +
|
|
((sge_bytes % MEGAMFI_FRAME_SIZE) ? 1 : 0) ;
|
|
}
|
|
/* Main frame */
|
|
frame_count += 1;
|
|
|
|
if (frame_count > 7)
|
|
frame_count = 8;
|
|
return frame_count;
|
|
}
|
|
|
|
/**
|
|
* megasas_build_dcdb - Prepares a direct cdb (DCDB) command
|
|
* @instance: Adapter soft state
|
|
* @scp: SCSI command
|
|
* @cmd: Command to be prepared in
|
|
*
|
|
* This function prepares CDB commands. These are typcially pass-through
|
|
* commands to the devices.
|
|
*/
|
|
static int
|
|
megasas_build_dcdb(struct megasas_instance *instance, struct scsi_cmnd *scp,
|
|
struct megasas_cmd *cmd)
|
|
{
|
|
u32 is_logical;
|
|
u32 device_id;
|
|
u16 flags = 0;
|
|
struct megasas_pthru_frame *pthru;
|
|
|
|
is_logical = MEGASAS_IS_LOGICAL(scp->device);
|
|
device_id = MEGASAS_DEV_INDEX(scp);
|
|
pthru = (struct megasas_pthru_frame *)cmd->frame;
|
|
|
|
if (scp->sc_data_direction == PCI_DMA_TODEVICE)
|
|
flags = MFI_FRAME_DIR_WRITE;
|
|
else if (scp->sc_data_direction == PCI_DMA_FROMDEVICE)
|
|
flags = MFI_FRAME_DIR_READ;
|
|
else if (scp->sc_data_direction == PCI_DMA_NONE)
|
|
flags = MFI_FRAME_DIR_NONE;
|
|
|
|
if (instance->flag_ieee == 1) {
|
|
flags |= MFI_FRAME_IEEE;
|
|
}
|
|
|
|
/*
|
|
* Prepare the DCDB frame
|
|
*/
|
|
pthru->cmd = (is_logical) ? MFI_CMD_LD_SCSI_IO : MFI_CMD_PD_SCSI_IO;
|
|
pthru->cmd_status = 0x0;
|
|
pthru->scsi_status = 0x0;
|
|
pthru->target_id = device_id;
|
|
pthru->lun = scp->device->lun;
|
|
pthru->cdb_len = scp->cmd_len;
|
|
pthru->timeout = 0;
|
|
pthru->pad_0 = 0;
|
|
pthru->flags = cpu_to_le16(flags);
|
|
pthru->data_xfer_len = cpu_to_le32(scsi_bufflen(scp));
|
|
|
|
memcpy(pthru->cdb, scp->cmnd, scp->cmd_len);
|
|
|
|
/*
|
|
* If the command is for the tape device, set the
|
|
* pthru timeout to the os layer timeout value.
|
|
*/
|
|
if (scp->device->type == TYPE_TAPE) {
|
|
if ((scp->request->timeout / HZ) > 0xFFFF)
|
|
pthru->timeout = cpu_to_le16(0xFFFF);
|
|
else
|
|
pthru->timeout = cpu_to_le16(scp->request->timeout / HZ);
|
|
}
|
|
|
|
/*
|
|
* Construct SGL
|
|
*/
|
|
if (instance->flag_ieee == 1) {
|
|
pthru->flags |= cpu_to_le16(MFI_FRAME_SGL64);
|
|
pthru->sge_count = megasas_make_sgl_skinny(instance, scp,
|
|
&pthru->sgl);
|
|
} else if (IS_DMA64) {
|
|
pthru->flags |= cpu_to_le16(MFI_FRAME_SGL64);
|
|
pthru->sge_count = megasas_make_sgl64(instance, scp,
|
|
&pthru->sgl);
|
|
} else
|
|
pthru->sge_count = megasas_make_sgl32(instance, scp,
|
|
&pthru->sgl);
|
|
|
|
if (pthru->sge_count > instance->max_num_sge) {
|
|
dev_err(&instance->pdev->dev, "DCDB too many SGE NUM=%x\n",
|
|
pthru->sge_count);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Sense info specific
|
|
*/
|
|
pthru->sense_len = SCSI_SENSE_BUFFERSIZE;
|
|
pthru->sense_buf_phys_addr_hi =
|
|
cpu_to_le32(upper_32_bits(cmd->sense_phys_addr));
|
|
pthru->sense_buf_phys_addr_lo =
|
|
cpu_to_le32(lower_32_bits(cmd->sense_phys_addr));
|
|
|
|
/*
|
|
* Compute the total number of frames this command consumes. FW uses
|
|
* this number to pull sufficient number of frames from host memory.
|
|
*/
|
|
cmd->frame_count = megasas_get_frame_count(instance, pthru->sge_count,
|
|
PTHRU_FRAME);
|
|
|
|
return cmd->frame_count;
|
|
}
|
|
|
|
/**
|
|
* megasas_build_ldio - Prepares IOs to logical devices
|
|
* @instance: Adapter soft state
|
|
* @scp: SCSI command
|
|
* @cmd: Command to be prepared
|
|
*
|
|
* Frames (and accompanying SGLs) for regular SCSI IOs use this function.
|
|
*/
|
|
static int
|
|
megasas_build_ldio(struct megasas_instance *instance, struct scsi_cmnd *scp,
|
|
struct megasas_cmd *cmd)
|
|
{
|
|
u32 device_id;
|
|
u8 sc = scp->cmnd[0];
|
|
u16 flags = 0;
|
|
struct megasas_io_frame *ldio;
|
|
|
|
device_id = MEGASAS_DEV_INDEX(scp);
|
|
ldio = (struct megasas_io_frame *)cmd->frame;
|
|
|
|
if (scp->sc_data_direction == PCI_DMA_TODEVICE)
|
|
flags = MFI_FRAME_DIR_WRITE;
|
|
else if (scp->sc_data_direction == PCI_DMA_FROMDEVICE)
|
|
flags = MFI_FRAME_DIR_READ;
|
|
|
|
if (instance->flag_ieee == 1) {
|
|
flags |= MFI_FRAME_IEEE;
|
|
}
|
|
|
|
/*
|
|
* Prepare the Logical IO frame: 2nd bit is zero for all read cmds
|
|
*/
|
|
ldio->cmd = (sc & 0x02) ? MFI_CMD_LD_WRITE : MFI_CMD_LD_READ;
|
|
ldio->cmd_status = 0x0;
|
|
ldio->scsi_status = 0x0;
|
|
ldio->target_id = device_id;
|
|
ldio->timeout = 0;
|
|
ldio->reserved_0 = 0;
|
|
ldio->pad_0 = 0;
|
|
ldio->flags = cpu_to_le16(flags);
|
|
ldio->start_lba_hi = 0;
|
|
ldio->access_byte = (scp->cmd_len != 6) ? scp->cmnd[1] : 0;
|
|
|
|
/*
|
|
* 6-byte READ(0x08) or WRITE(0x0A) cdb
|
|
*/
|
|
if (scp->cmd_len == 6) {
|
|
ldio->lba_count = cpu_to_le32((u32) scp->cmnd[4]);
|
|
ldio->start_lba_lo = cpu_to_le32(((u32) scp->cmnd[1] << 16) |
|
|
((u32) scp->cmnd[2] << 8) |
|
|
(u32) scp->cmnd[3]);
|
|
|
|
ldio->start_lba_lo &= cpu_to_le32(0x1FFFFF);
|
|
}
|
|
|
|
/*
|
|
* 10-byte READ(0x28) or WRITE(0x2A) cdb
|
|
*/
|
|
else if (scp->cmd_len == 10) {
|
|
ldio->lba_count = cpu_to_le32((u32) scp->cmnd[8] |
|
|
((u32) scp->cmnd[7] << 8));
|
|
ldio->start_lba_lo = cpu_to_le32(((u32) scp->cmnd[2] << 24) |
|
|
((u32) scp->cmnd[3] << 16) |
|
|
((u32) scp->cmnd[4] << 8) |
|
|
(u32) scp->cmnd[5]);
|
|
}
|
|
|
|
/*
|
|
* 12-byte READ(0xA8) or WRITE(0xAA) cdb
|
|
*/
|
|
else if (scp->cmd_len == 12) {
|
|
ldio->lba_count = cpu_to_le32(((u32) scp->cmnd[6] << 24) |
|
|
((u32) scp->cmnd[7] << 16) |
|
|
((u32) scp->cmnd[8] << 8) |
|
|
(u32) scp->cmnd[9]);
|
|
|
|
ldio->start_lba_lo = cpu_to_le32(((u32) scp->cmnd[2] << 24) |
|
|
((u32) scp->cmnd[3] << 16) |
|
|
((u32) scp->cmnd[4] << 8) |
|
|
(u32) scp->cmnd[5]);
|
|
}
|
|
|
|
/*
|
|
* 16-byte READ(0x88) or WRITE(0x8A) cdb
|
|
*/
|
|
else if (scp->cmd_len == 16) {
|
|
ldio->lba_count = cpu_to_le32(((u32) scp->cmnd[10] << 24) |
|
|
((u32) scp->cmnd[11] << 16) |
|
|
((u32) scp->cmnd[12] << 8) |
|
|
(u32) scp->cmnd[13]);
|
|
|
|
ldio->start_lba_lo = cpu_to_le32(((u32) scp->cmnd[6] << 24) |
|
|
((u32) scp->cmnd[7] << 16) |
|
|
((u32) scp->cmnd[8] << 8) |
|
|
(u32) scp->cmnd[9]);
|
|
|
|
ldio->start_lba_hi = cpu_to_le32(((u32) scp->cmnd[2] << 24) |
|
|
((u32) scp->cmnd[3] << 16) |
|
|
((u32) scp->cmnd[4] << 8) |
|
|
(u32) scp->cmnd[5]);
|
|
|
|
}
|
|
|
|
/*
|
|
* Construct SGL
|
|
*/
|
|
if (instance->flag_ieee) {
|
|
ldio->flags |= cpu_to_le16(MFI_FRAME_SGL64);
|
|
ldio->sge_count = megasas_make_sgl_skinny(instance, scp,
|
|
&ldio->sgl);
|
|
} else if (IS_DMA64) {
|
|
ldio->flags |= cpu_to_le16(MFI_FRAME_SGL64);
|
|
ldio->sge_count = megasas_make_sgl64(instance, scp, &ldio->sgl);
|
|
} else
|
|
ldio->sge_count = megasas_make_sgl32(instance, scp, &ldio->sgl);
|
|
|
|
if (ldio->sge_count > instance->max_num_sge) {
|
|
dev_err(&instance->pdev->dev, "build_ld_io: sge_count = %x\n",
|
|
ldio->sge_count);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Sense info specific
|
|
*/
|
|
ldio->sense_len = SCSI_SENSE_BUFFERSIZE;
|
|
ldio->sense_buf_phys_addr_hi = 0;
|
|
ldio->sense_buf_phys_addr_lo = cpu_to_le32(cmd->sense_phys_addr);
|
|
|
|
/*
|
|
* Compute the total number of frames this command consumes. FW uses
|
|
* this number to pull sufficient number of frames from host memory.
|
|
*/
|
|
cmd->frame_count = megasas_get_frame_count(instance,
|
|
ldio->sge_count, IO_FRAME);
|
|
|
|
return cmd->frame_count;
|
|
}
|
|
|
|
/**
|
|
* megasas_cmd_type - Checks if the cmd is for logical drive/sysPD
|
|
* and whether it's RW or non RW
|
|
* @scmd: SCSI command
|
|
*
|
|
*/
|
|
inline int megasas_cmd_type(struct scsi_cmnd *cmd)
|
|
{
|
|
int ret;
|
|
|
|
switch (cmd->cmnd[0]) {
|
|
case READ_10:
|
|
case WRITE_10:
|
|
case READ_12:
|
|
case WRITE_12:
|
|
case READ_6:
|
|
case WRITE_6:
|
|
case READ_16:
|
|
case WRITE_16:
|
|
ret = (MEGASAS_IS_LOGICAL(cmd->device)) ?
|
|
READ_WRITE_LDIO : READ_WRITE_SYSPDIO;
|
|
break;
|
|
default:
|
|
ret = (MEGASAS_IS_LOGICAL(cmd->device)) ?
|
|
NON_READ_WRITE_LDIO : NON_READ_WRITE_SYSPDIO;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* megasas_dump_pending_frames - Dumps the frame address of all pending cmds
|
|
* in FW
|
|
* @instance: Adapter soft state
|
|
*/
|
|
static inline void
|
|
megasas_dump_pending_frames(struct megasas_instance *instance)
|
|
{
|
|
struct megasas_cmd *cmd;
|
|
int i,n;
|
|
union megasas_sgl *mfi_sgl;
|
|
struct megasas_io_frame *ldio;
|
|
struct megasas_pthru_frame *pthru;
|
|
u32 sgcount;
|
|
u16 max_cmd = instance->max_fw_cmds;
|
|
|
|
dev_err(&instance->pdev->dev, "[%d]: Dumping Frame Phys Address of all pending cmds in FW\n",instance->host->host_no);
|
|
dev_err(&instance->pdev->dev, "[%d]: Total OS Pending cmds : %d\n",instance->host->host_no,atomic_read(&instance->fw_outstanding));
|
|
if (IS_DMA64)
|
|
dev_err(&instance->pdev->dev, "[%d]: 64 bit SGLs were sent to FW\n",instance->host->host_no);
|
|
else
|
|
dev_err(&instance->pdev->dev, "[%d]: 32 bit SGLs were sent to FW\n",instance->host->host_no);
|
|
|
|
dev_err(&instance->pdev->dev, "[%d]: Pending OS cmds in FW : \n",instance->host->host_no);
|
|
for (i = 0; i < max_cmd; i++) {
|
|
cmd = instance->cmd_list[i];
|
|
if (!cmd->scmd)
|
|
continue;
|
|
dev_err(&instance->pdev->dev, "[%d]: Frame addr :0x%08lx : ",instance->host->host_no,(unsigned long)cmd->frame_phys_addr);
|
|
if (megasas_cmd_type(cmd->scmd) == READ_WRITE_LDIO) {
|
|
ldio = (struct megasas_io_frame *)cmd->frame;
|
|
mfi_sgl = &ldio->sgl;
|
|
sgcount = ldio->sge_count;
|
|
dev_err(&instance->pdev->dev, "[%d]: frame count : 0x%x, Cmd : 0x%x, Tgt id : 0x%x,"
|
|
" lba lo : 0x%x, lba_hi : 0x%x, sense_buf addr : 0x%x,sge count : 0x%x\n",
|
|
instance->host->host_no, cmd->frame_count, ldio->cmd, ldio->target_id,
|
|
le32_to_cpu(ldio->start_lba_lo), le32_to_cpu(ldio->start_lba_hi),
|
|
le32_to_cpu(ldio->sense_buf_phys_addr_lo), sgcount);
|
|
} else {
|
|
pthru = (struct megasas_pthru_frame *) cmd->frame;
|
|
mfi_sgl = &pthru->sgl;
|
|
sgcount = pthru->sge_count;
|
|
dev_err(&instance->pdev->dev, "[%d]: frame count : 0x%x, Cmd : 0x%x, Tgt id : 0x%x, "
|
|
"lun : 0x%x, cdb_len : 0x%x, data xfer len : 0x%x, sense_buf addr : 0x%x,sge count : 0x%x\n",
|
|
instance->host->host_no, cmd->frame_count, pthru->cmd, pthru->target_id,
|
|
pthru->lun, pthru->cdb_len, le32_to_cpu(pthru->data_xfer_len),
|
|
le32_to_cpu(pthru->sense_buf_phys_addr_lo), sgcount);
|
|
}
|
|
if (megasas_dbg_lvl & MEGASAS_DBG_LVL) {
|
|
for (n = 0; n < sgcount; n++) {
|
|
if (IS_DMA64)
|
|
dev_err(&instance->pdev->dev, "sgl len : 0x%x, sgl addr : 0x%llx\n",
|
|
le32_to_cpu(mfi_sgl->sge64[n].length),
|
|
le64_to_cpu(mfi_sgl->sge64[n].phys_addr));
|
|
else
|
|
dev_err(&instance->pdev->dev, "sgl len : 0x%x, sgl addr : 0x%x\n",
|
|
le32_to_cpu(mfi_sgl->sge32[n].length),
|
|
le32_to_cpu(mfi_sgl->sge32[n].phys_addr));
|
|
}
|
|
}
|
|
} /*for max_cmd*/
|
|
dev_err(&instance->pdev->dev, "[%d]: Pending Internal cmds in FW : \n",instance->host->host_no);
|
|
for (i = 0; i < max_cmd; i++) {
|
|
|
|
cmd = instance->cmd_list[i];
|
|
|
|
if (cmd->sync_cmd == 1)
|
|
dev_err(&instance->pdev->dev, "0x%08lx : ", (unsigned long)cmd->frame_phys_addr);
|
|
}
|
|
dev_err(&instance->pdev->dev, "[%d]: Dumping Done\n\n",instance->host->host_no);
|
|
}
|
|
|
|
u32
|
|
megasas_build_and_issue_cmd(struct megasas_instance *instance,
|
|
struct scsi_cmnd *scmd)
|
|
{
|
|
struct megasas_cmd *cmd;
|
|
u32 frame_count;
|
|
|
|
cmd = megasas_get_cmd(instance);
|
|
if (!cmd)
|
|
return SCSI_MLQUEUE_HOST_BUSY;
|
|
|
|
/*
|
|
* Logical drive command
|
|
*/
|
|
if (megasas_cmd_type(scmd) == READ_WRITE_LDIO)
|
|
frame_count = megasas_build_ldio(instance, scmd, cmd);
|
|
else
|
|
frame_count = megasas_build_dcdb(instance, scmd, cmd);
|
|
|
|
if (!frame_count)
|
|
goto out_return_cmd;
|
|
|
|
cmd->scmd = scmd;
|
|
scmd->SCp.ptr = (char *)cmd;
|
|
|
|
/*
|
|
* Issue the command to the FW
|
|
*/
|
|
atomic_inc(&instance->fw_outstanding);
|
|
|
|
instance->instancet->fire_cmd(instance, cmd->frame_phys_addr,
|
|
cmd->frame_count-1, instance->reg_set);
|
|
|
|
return 0;
|
|
out_return_cmd:
|
|
megasas_return_cmd(instance, cmd);
|
|
return SCSI_MLQUEUE_HOST_BUSY;
|
|
}
|
|
|
|
|
|
/**
|
|
* megasas_queue_command - Queue entry point
|
|
* @scmd: SCSI command to be queued
|
|
* @done: Callback entry point
|
|
*/
|
|
static int
|
|
megasas_queue_command(struct Scsi_Host *shost, struct scsi_cmnd *scmd)
|
|
{
|
|
struct megasas_instance *instance;
|
|
struct MR_PRIV_DEVICE *mr_device_priv_data;
|
|
|
|
instance = (struct megasas_instance *)
|
|
scmd->device->host->hostdata;
|
|
|
|
if (instance->unload == 1) {
|
|
scmd->result = DID_NO_CONNECT << 16;
|
|
scmd->scsi_done(scmd);
|
|
return 0;
|
|
}
|
|
|
|
if (instance->issuepend_done == 0)
|
|
return SCSI_MLQUEUE_HOST_BUSY;
|
|
|
|
|
|
/* Check for an mpio path and adjust behavior */
|
|
if (atomic_read(&instance->adprecovery) == MEGASAS_ADPRESET_SM_INFAULT) {
|
|
if (megasas_check_mpio_paths(instance, scmd) ==
|
|
(DID_REQUEUE << 16)) {
|
|
return SCSI_MLQUEUE_HOST_BUSY;
|
|
} else {
|
|
scmd->result = DID_NO_CONNECT << 16;
|
|
scmd->scsi_done(scmd);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
if (atomic_read(&instance->adprecovery) == MEGASAS_HW_CRITICAL_ERROR) {
|
|
scmd->result = DID_NO_CONNECT << 16;
|
|
scmd->scsi_done(scmd);
|
|
return 0;
|
|
}
|
|
|
|
mr_device_priv_data = scmd->device->hostdata;
|
|
if (!mr_device_priv_data) {
|
|
scmd->result = DID_NO_CONNECT << 16;
|
|
scmd->scsi_done(scmd);
|
|
return 0;
|
|
}
|
|
|
|
if (atomic_read(&instance->adprecovery) != MEGASAS_HBA_OPERATIONAL)
|
|
return SCSI_MLQUEUE_HOST_BUSY;
|
|
|
|
if (mr_device_priv_data->tm_busy)
|
|
return SCSI_MLQUEUE_DEVICE_BUSY;
|
|
|
|
|
|
scmd->result = 0;
|
|
|
|
if (MEGASAS_IS_LOGICAL(scmd->device) &&
|
|
(scmd->device->id >= instance->fw_supported_vd_count ||
|
|
scmd->device->lun)) {
|
|
scmd->result = DID_BAD_TARGET << 16;
|
|
goto out_done;
|
|
}
|
|
|
|
if ((scmd->cmnd[0] == SYNCHRONIZE_CACHE) &&
|
|
MEGASAS_IS_LOGICAL(scmd->device) &&
|
|
(!instance->fw_sync_cache_support)) {
|
|
scmd->result = DID_OK << 16;
|
|
goto out_done;
|
|
}
|
|
|
|
return instance->instancet->build_and_issue_cmd(instance, scmd);
|
|
|
|
out_done:
|
|
scmd->scsi_done(scmd);
|
|
return 0;
|
|
}
|
|
|
|
static struct megasas_instance *megasas_lookup_instance(u16 host_no)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < megasas_mgmt_info.max_index; i++) {
|
|
|
|
if ((megasas_mgmt_info.instance[i]) &&
|
|
(megasas_mgmt_info.instance[i]->host->host_no == host_no))
|
|
return megasas_mgmt_info.instance[i];
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
/*
|
|
* megasas_set_dynamic_target_properties -
|
|
* Device property set by driver may not be static and it is required to be
|
|
* updated after OCR
|
|
*
|
|
* set tm_capable.
|
|
* set dma alignment (only for eedp protection enable vd).
|
|
*
|
|
* @sdev: OS provided scsi device
|
|
*
|
|
* Returns void
|
|
*/
|
|
void megasas_set_dynamic_target_properties(struct scsi_device *sdev)
|
|
{
|
|
u16 pd_index = 0, ld;
|
|
u32 device_id;
|
|
struct megasas_instance *instance;
|
|
struct fusion_context *fusion;
|
|
struct MR_PRIV_DEVICE *mr_device_priv_data;
|
|
struct MR_PD_CFG_SEQ_NUM_SYNC *pd_sync;
|
|
struct MR_LD_RAID *raid;
|
|
struct MR_DRV_RAID_MAP_ALL *local_map_ptr;
|
|
|
|
instance = megasas_lookup_instance(sdev->host->host_no);
|
|
fusion = instance->ctrl_context;
|
|
mr_device_priv_data = sdev->hostdata;
|
|
|
|
if (!fusion || !mr_device_priv_data)
|
|
return;
|
|
|
|
if (MEGASAS_IS_LOGICAL(sdev)) {
|
|
device_id = ((sdev->channel % 2) * MEGASAS_MAX_DEV_PER_CHANNEL)
|
|
+ sdev->id;
|
|
local_map_ptr = fusion->ld_drv_map[(instance->map_id & 1)];
|
|
ld = MR_TargetIdToLdGet(device_id, local_map_ptr);
|
|
if (ld >= instance->fw_supported_vd_count)
|
|
return;
|
|
raid = MR_LdRaidGet(ld, local_map_ptr);
|
|
|
|
if (raid->capability.ldPiMode == MR_PROT_INFO_TYPE_CONTROLLER)
|
|
blk_queue_update_dma_alignment(sdev->request_queue, 0x7);
|
|
|
|
mr_device_priv_data->is_tm_capable =
|
|
raid->capability.tmCapable;
|
|
} else if (instance->use_seqnum_jbod_fp) {
|
|
pd_index = (sdev->channel * MEGASAS_MAX_DEV_PER_CHANNEL) +
|
|
sdev->id;
|
|
pd_sync = (void *)fusion->pd_seq_sync
|
|
[(instance->pd_seq_map_id - 1) & 1];
|
|
mr_device_priv_data->is_tm_capable =
|
|
pd_sync->seq[pd_index].capability.tmCapable;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* megasas_set_nvme_device_properties -
|
|
* set nomerges=2
|
|
* set virtual page boundary = 4K (current mr_nvme_pg_size is 4K).
|
|
* set maximum io transfer = MDTS of NVME device provided by MR firmware.
|
|
*
|
|
* MR firmware provides value in KB. Caller of this function converts
|
|
* kb into bytes.
|
|
*
|
|
* e.a MDTS=5 means 2^5 * nvme page size. (In case of 4K page size,
|
|
* MR firmware provides value 128 as (32 * 4K) = 128K.
|
|
*
|
|
* @sdev: scsi device
|
|
* @max_io_size: maximum io transfer size
|
|
*
|
|
*/
|
|
static inline void
|
|
megasas_set_nvme_device_properties(struct scsi_device *sdev, u32 max_io_size)
|
|
{
|
|
struct megasas_instance *instance;
|
|
u32 mr_nvme_pg_size;
|
|
|
|
instance = (struct megasas_instance *)sdev->host->hostdata;
|
|
mr_nvme_pg_size = max_t(u32, instance->nvme_page_size,
|
|
MR_DEFAULT_NVME_PAGE_SIZE);
|
|
|
|
blk_queue_max_hw_sectors(sdev->request_queue, (max_io_size / 512));
|
|
|
|
queue_flag_set_unlocked(QUEUE_FLAG_NOMERGES, sdev->request_queue);
|
|
blk_queue_virt_boundary(sdev->request_queue, mr_nvme_pg_size - 1);
|
|
}
|
|
|
|
|
|
/*
|
|
* megasas_set_static_target_properties -
|
|
* Device property set by driver are static and it is not required to be
|
|
* updated after OCR.
|
|
*
|
|
* set io timeout
|
|
* set device queue depth
|
|
* set nvme device properties. see - megasas_set_nvme_device_properties
|
|
*
|
|
* @sdev: scsi device
|
|
* @is_target_prop true, if fw provided target properties.
|
|
*/
|
|
static void megasas_set_static_target_properties(struct scsi_device *sdev,
|
|
bool is_target_prop)
|
|
{
|
|
u16 target_index = 0;
|
|
u8 interface_type;
|
|
u32 device_qd = MEGASAS_DEFAULT_CMD_PER_LUN;
|
|
u32 max_io_size_kb = MR_DEFAULT_NVME_MDTS_KB;
|
|
u32 tgt_device_qd;
|
|
struct megasas_instance *instance;
|
|
struct MR_PRIV_DEVICE *mr_device_priv_data;
|
|
|
|
instance = megasas_lookup_instance(sdev->host->host_no);
|
|
mr_device_priv_data = sdev->hostdata;
|
|
interface_type = mr_device_priv_data->interface_type;
|
|
|
|
/*
|
|
* The RAID firmware may require extended timeouts.
|
|
*/
|
|
blk_queue_rq_timeout(sdev->request_queue, scmd_timeout * HZ);
|
|
|
|
target_index = (sdev->channel * MEGASAS_MAX_DEV_PER_CHANNEL) + sdev->id;
|
|
|
|
switch (interface_type) {
|
|
case SAS_PD:
|
|
device_qd = MEGASAS_SAS_QD;
|
|
break;
|
|
case SATA_PD:
|
|
device_qd = MEGASAS_SATA_QD;
|
|
break;
|
|
case NVME_PD:
|
|
device_qd = MEGASAS_NVME_QD;
|
|
break;
|
|
}
|
|
|
|
if (is_target_prop) {
|
|
tgt_device_qd = le32_to_cpu(instance->tgt_prop->device_qdepth);
|
|
if (tgt_device_qd &&
|
|
(tgt_device_qd <= instance->host->can_queue))
|
|
device_qd = tgt_device_qd;
|
|
|
|
/* max_io_size_kb will be set to non zero for
|
|
* nvme based vd and syspd.
|
|
*/
|
|
max_io_size_kb = le32_to_cpu(instance->tgt_prop->max_io_size_kb);
|
|
}
|
|
|
|
if (instance->nvme_page_size && max_io_size_kb)
|
|
megasas_set_nvme_device_properties(sdev, (max_io_size_kb << 10));
|
|
|
|
scsi_change_queue_depth(sdev, device_qd);
|
|
|
|
}
|
|
|
|
|
|
static int megasas_slave_configure(struct scsi_device *sdev)
|
|
{
|
|
u16 pd_index = 0;
|
|
struct megasas_instance *instance;
|
|
int ret_target_prop = DCMD_FAILED;
|
|
bool is_target_prop = false;
|
|
|
|
instance = megasas_lookup_instance(sdev->host->host_no);
|
|
if (instance->pd_list_not_supported) {
|
|
if (!MEGASAS_IS_LOGICAL(sdev) && sdev->type == TYPE_DISK) {
|
|
pd_index = (sdev->channel * MEGASAS_MAX_DEV_PER_CHANNEL) +
|
|
sdev->id;
|
|
if (instance->pd_list[pd_index].driveState !=
|
|
MR_PD_STATE_SYSTEM)
|
|
return -ENXIO;
|
|
}
|
|
}
|
|
|
|
mutex_lock(&instance->reset_mutex);
|
|
/* Send DCMD to Firmware and cache the information */
|
|
if ((instance->pd_info) && !MEGASAS_IS_LOGICAL(sdev))
|
|
megasas_get_pd_info(instance, sdev);
|
|
|
|
/* Some ventura firmware may not have instance->nvme_page_size set.
|
|
* Do not send MR_DCMD_DRV_GET_TARGET_PROP
|
|
*/
|
|
if ((instance->tgt_prop) && (instance->nvme_page_size))
|
|
ret_target_prop = megasas_get_target_prop(instance, sdev);
|
|
|
|
is_target_prop = (ret_target_prop == DCMD_SUCCESS) ? true : false;
|
|
megasas_set_static_target_properties(sdev, is_target_prop);
|
|
|
|
mutex_unlock(&instance->reset_mutex);
|
|
|
|
/* This sdev property may change post OCR */
|
|
megasas_set_dynamic_target_properties(sdev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int megasas_slave_alloc(struct scsi_device *sdev)
|
|
{
|
|
u16 pd_index = 0;
|
|
struct megasas_instance *instance ;
|
|
struct MR_PRIV_DEVICE *mr_device_priv_data;
|
|
|
|
instance = megasas_lookup_instance(sdev->host->host_no);
|
|
if (!MEGASAS_IS_LOGICAL(sdev)) {
|
|
/*
|
|
* Open the OS scan to the SYSTEM PD
|
|
*/
|
|
pd_index =
|
|
(sdev->channel * MEGASAS_MAX_DEV_PER_CHANNEL) +
|
|
sdev->id;
|
|
if ((instance->pd_list_not_supported ||
|
|
instance->pd_list[pd_index].driveState ==
|
|
MR_PD_STATE_SYSTEM)) {
|
|
goto scan_target;
|
|
}
|
|
return -ENXIO;
|
|
}
|
|
|
|
scan_target:
|
|
mr_device_priv_data = kzalloc(sizeof(*mr_device_priv_data),
|
|
GFP_KERNEL);
|
|
if (!mr_device_priv_data)
|
|
return -ENOMEM;
|
|
sdev->hostdata = mr_device_priv_data;
|
|
|
|
atomic_set(&mr_device_priv_data->r1_ldio_hint,
|
|
instance->r1_ldio_hint_default);
|
|
return 0;
|
|
}
|
|
|
|
static void megasas_slave_destroy(struct scsi_device *sdev)
|
|
{
|
|
kfree(sdev->hostdata);
|
|
sdev->hostdata = NULL;
|
|
}
|
|
|
|
/*
|
|
* megasas_complete_outstanding_ioctls - Complete outstanding ioctls after a
|
|
* kill adapter
|
|
* @instance: Adapter soft state
|
|
*
|
|
*/
|
|
static void megasas_complete_outstanding_ioctls(struct megasas_instance *instance)
|
|
{
|
|
int i;
|
|
struct megasas_cmd *cmd_mfi;
|
|
struct megasas_cmd_fusion *cmd_fusion;
|
|
struct fusion_context *fusion = instance->ctrl_context;
|
|
|
|
/* Find all outstanding ioctls */
|
|
if (fusion) {
|
|
for (i = 0; i < instance->max_fw_cmds; i++) {
|
|
cmd_fusion = fusion->cmd_list[i];
|
|
if (cmd_fusion->sync_cmd_idx != (u32)ULONG_MAX) {
|
|
cmd_mfi = instance->cmd_list[cmd_fusion->sync_cmd_idx];
|
|
if (cmd_mfi->sync_cmd &&
|
|
(cmd_mfi->frame->hdr.cmd != MFI_CMD_ABORT)) {
|
|
cmd_mfi->frame->hdr.cmd_status =
|
|
MFI_STAT_WRONG_STATE;
|
|
megasas_complete_cmd(instance,
|
|
cmd_mfi, DID_OK);
|
|
}
|
|
}
|
|
}
|
|
} else {
|
|
for (i = 0; i < instance->max_fw_cmds; i++) {
|
|
cmd_mfi = instance->cmd_list[i];
|
|
if (cmd_mfi->sync_cmd && cmd_mfi->frame->hdr.cmd !=
|
|
MFI_CMD_ABORT)
|
|
megasas_complete_cmd(instance, cmd_mfi, DID_OK);
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
void megaraid_sas_kill_hba(struct megasas_instance *instance)
|
|
{
|
|
/* Set critical error to block I/O & ioctls in case caller didn't */
|
|
atomic_set(&instance->adprecovery, MEGASAS_HW_CRITICAL_ERROR);
|
|
/* Wait 1 second to ensure IO or ioctls in build have posted */
|
|
msleep(1000);
|
|
if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
|
|
(instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0071SKINNY) ||
|
|
(instance->adapter_type != MFI_SERIES)) {
|
|
writel(MFI_STOP_ADP, &instance->reg_set->doorbell);
|
|
/* Flush */
|
|
readl(&instance->reg_set->doorbell);
|
|
if (instance->requestorId && instance->peerIsPresent)
|
|
memset(instance->ld_ids, 0xff, MEGASAS_MAX_LD_IDS);
|
|
} else {
|
|
writel(MFI_STOP_ADP,
|
|
&instance->reg_set->inbound_doorbell);
|
|
}
|
|
/* Complete outstanding ioctls when adapter is killed */
|
|
megasas_complete_outstanding_ioctls(instance);
|
|
}
|
|
|
|
/**
|
|
* megasas_check_and_restore_queue_depth - Check if queue depth needs to be
|
|
* restored to max value
|
|
* @instance: Adapter soft state
|
|
*
|
|
*/
|
|
void
|
|
megasas_check_and_restore_queue_depth(struct megasas_instance *instance)
|
|
{
|
|
unsigned long flags;
|
|
|
|
if (instance->flag & MEGASAS_FW_BUSY
|
|
&& time_after(jiffies, instance->last_time + 5 * HZ)
|
|
&& atomic_read(&instance->fw_outstanding) <
|
|
instance->throttlequeuedepth + 1) {
|
|
|
|
spin_lock_irqsave(instance->host->host_lock, flags);
|
|
instance->flag &= ~MEGASAS_FW_BUSY;
|
|
|
|
instance->host->can_queue = instance->cur_can_queue;
|
|
spin_unlock_irqrestore(instance->host->host_lock, flags);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* megasas_complete_cmd_dpc - Returns FW's controller structure
|
|
* @instance_addr: Address of adapter soft state
|
|
*
|
|
* Tasklet to complete cmds
|
|
*/
|
|
static void megasas_complete_cmd_dpc(unsigned long instance_addr)
|
|
{
|
|
u32 producer;
|
|
u32 consumer;
|
|
u32 context;
|
|
struct megasas_cmd *cmd;
|
|
struct megasas_instance *instance =
|
|
(struct megasas_instance *)instance_addr;
|
|
unsigned long flags;
|
|
|
|
/* If we have already declared adapter dead, donot complete cmds */
|
|
if (atomic_read(&instance->adprecovery) == MEGASAS_HW_CRITICAL_ERROR)
|
|
return;
|
|
|
|
spin_lock_irqsave(&instance->completion_lock, flags);
|
|
|
|
producer = le32_to_cpu(*instance->producer);
|
|
consumer = le32_to_cpu(*instance->consumer);
|
|
|
|
while (consumer != producer) {
|
|
context = le32_to_cpu(instance->reply_queue[consumer]);
|
|
if (context >= instance->max_fw_cmds) {
|
|
dev_err(&instance->pdev->dev, "Unexpected context value %x\n",
|
|
context);
|
|
BUG();
|
|
}
|
|
|
|
cmd = instance->cmd_list[context];
|
|
|
|
megasas_complete_cmd(instance, cmd, DID_OK);
|
|
|
|
consumer++;
|
|
if (consumer == (instance->max_fw_cmds + 1)) {
|
|
consumer = 0;
|
|
}
|
|
}
|
|
|
|
*instance->consumer = cpu_to_le32(producer);
|
|
|
|
spin_unlock_irqrestore(&instance->completion_lock, flags);
|
|
|
|
/*
|
|
* Check if we can restore can_queue
|
|
*/
|
|
megasas_check_and_restore_queue_depth(instance);
|
|
}
|
|
|
|
static void megasas_sriov_heartbeat_handler(struct timer_list *t);
|
|
|
|
/**
|
|
* megasas_start_timer - Initializes sriov heartbeat timer object
|
|
* @instance: Adapter soft state
|
|
*
|
|
*/
|
|
void megasas_start_timer(struct megasas_instance *instance)
|
|
{
|
|
struct timer_list *timer = &instance->sriov_heartbeat_timer;
|
|
|
|
timer_setup(timer, megasas_sriov_heartbeat_handler, 0);
|
|
timer->expires = jiffies + MEGASAS_SRIOV_HEARTBEAT_INTERVAL_VF;
|
|
add_timer(timer);
|
|
}
|
|
|
|
static void
|
|
megasas_internal_reset_defer_cmds(struct megasas_instance *instance);
|
|
|
|
static void
|
|
process_fw_state_change_wq(struct work_struct *work);
|
|
|
|
void megasas_do_ocr(struct megasas_instance *instance)
|
|
{
|
|
if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS1064R) ||
|
|
(instance->pdev->device == PCI_DEVICE_ID_DELL_PERC5) ||
|
|
(instance->pdev->device == PCI_DEVICE_ID_LSI_VERDE_ZCR)) {
|
|
*instance->consumer = cpu_to_le32(MEGASAS_ADPRESET_INPROG_SIGN);
|
|
}
|
|
instance->instancet->disable_intr(instance);
|
|
atomic_set(&instance->adprecovery, MEGASAS_ADPRESET_SM_INFAULT);
|
|
instance->issuepend_done = 0;
|
|
|
|
atomic_set(&instance->fw_outstanding, 0);
|
|
megasas_internal_reset_defer_cmds(instance);
|
|
process_fw_state_change_wq(&instance->work_init);
|
|
}
|
|
|
|
static int megasas_get_ld_vf_affiliation_111(struct megasas_instance *instance,
|
|
int initial)
|
|
{
|
|
struct megasas_cmd *cmd;
|
|
struct megasas_dcmd_frame *dcmd;
|
|
struct MR_LD_VF_AFFILIATION_111 *new_affiliation_111 = NULL;
|
|
dma_addr_t new_affiliation_111_h;
|
|
int ld, retval = 0;
|
|
u8 thisVf;
|
|
|
|
cmd = megasas_get_cmd(instance);
|
|
|
|
if (!cmd) {
|
|
dev_printk(KERN_DEBUG, &instance->pdev->dev, "megasas_get_ld_vf_affiliation_111:"
|
|
"Failed to get cmd for scsi%d\n",
|
|
instance->host->host_no);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
dcmd = &cmd->frame->dcmd;
|
|
|
|
if (!instance->vf_affiliation_111) {
|
|
dev_warn(&instance->pdev->dev, "SR-IOV: Couldn't get LD/VF "
|
|
"affiliation for scsi%d\n", instance->host->host_no);
|
|
megasas_return_cmd(instance, cmd);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
if (initial)
|
|
memset(instance->vf_affiliation_111, 0,
|
|
sizeof(struct MR_LD_VF_AFFILIATION_111));
|
|
else {
|
|
new_affiliation_111 =
|
|
pci_alloc_consistent(instance->pdev,
|
|
sizeof(struct MR_LD_VF_AFFILIATION_111),
|
|
&new_affiliation_111_h);
|
|
if (!new_affiliation_111) {
|
|
dev_printk(KERN_DEBUG, &instance->pdev->dev, "SR-IOV: Couldn't allocate "
|
|
"memory for new affiliation for scsi%d\n",
|
|
instance->host->host_no);
|
|
megasas_return_cmd(instance, cmd);
|
|
return -ENOMEM;
|
|
}
|
|
memset(new_affiliation_111, 0,
|
|
sizeof(struct MR_LD_VF_AFFILIATION_111));
|
|
}
|
|
|
|
memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
|
|
|
|
dcmd->cmd = MFI_CMD_DCMD;
|
|
dcmd->cmd_status = MFI_STAT_INVALID_STATUS;
|
|
dcmd->sge_count = 1;
|
|
dcmd->flags = cpu_to_le16(MFI_FRAME_DIR_BOTH);
|
|
dcmd->timeout = 0;
|
|
dcmd->pad_0 = 0;
|
|
dcmd->data_xfer_len =
|
|
cpu_to_le32(sizeof(struct MR_LD_VF_AFFILIATION_111));
|
|
dcmd->opcode = cpu_to_le32(MR_DCMD_LD_VF_MAP_GET_ALL_LDS_111);
|
|
|
|
if (initial)
|
|
dcmd->sgl.sge32[0].phys_addr =
|
|
cpu_to_le32(instance->vf_affiliation_111_h);
|
|
else
|
|
dcmd->sgl.sge32[0].phys_addr =
|
|
cpu_to_le32(new_affiliation_111_h);
|
|
|
|
dcmd->sgl.sge32[0].length = cpu_to_le32(
|
|
sizeof(struct MR_LD_VF_AFFILIATION_111));
|
|
|
|
dev_warn(&instance->pdev->dev, "SR-IOV: Getting LD/VF affiliation for "
|
|
"scsi%d\n", instance->host->host_no);
|
|
|
|
if (megasas_issue_blocked_cmd(instance, cmd, 0) != DCMD_SUCCESS) {
|
|
dev_warn(&instance->pdev->dev, "SR-IOV: LD/VF affiliation DCMD"
|
|
" failed with status 0x%x for scsi%d\n",
|
|
dcmd->cmd_status, instance->host->host_no);
|
|
retval = 1; /* Do a scan if we couldn't get affiliation */
|
|
goto out;
|
|
}
|
|
|
|
if (!initial) {
|
|
thisVf = new_affiliation_111->thisVf;
|
|
for (ld = 0 ; ld < new_affiliation_111->vdCount; ld++)
|
|
if (instance->vf_affiliation_111->map[ld].policy[thisVf] !=
|
|
new_affiliation_111->map[ld].policy[thisVf]) {
|
|
dev_warn(&instance->pdev->dev, "SR-IOV: "
|
|
"Got new LD/VF affiliation for scsi%d\n",
|
|
instance->host->host_no);
|
|
memcpy(instance->vf_affiliation_111,
|
|
new_affiliation_111,
|
|
sizeof(struct MR_LD_VF_AFFILIATION_111));
|
|
retval = 1;
|
|
goto out;
|
|
}
|
|
}
|
|
out:
|
|
if (new_affiliation_111) {
|
|
pci_free_consistent(instance->pdev,
|
|
sizeof(struct MR_LD_VF_AFFILIATION_111),
|
|
new_affiliation_111,
|
|
new_affiliation_111_h);
|
|
}
|
|
|
|
megasas_return_cmd(instance, cmd);
|
|
|
|
return retval;
|
|
}
|
|
|
|
static int megasas_get_ld_vf_affiliation_12(struct megasas_instance *instance,
|
|
int initial)
|
|
{
|
|
struct megasas_cmd *cmd;
|
|
struct megasas_dcmd_frame *dcmd;
|
|
struct MR_LD_VF_AFFILIATION *new_affiliation = NULL;
|
|
struct MR_LD_VF_MAP *newmap = NULL, *savedmap = NULL;
|
|
dma_addr_t new_affiliation_h;
|
|
int i, j, retval = 0, found = 0, doscan = 0;
|
|
u8 thisVf;
|
|
|
|
cmd = megasas_get_cmd(instance);
|
|
|
|
if (!cmd) {
|
|
dev_printk(KERN_DEBUG, &instance->pdev->dev, "megasas_get_ld_vf_affiliation12: "
|
|
"Failed to get cmd for scsi%d\n",
|
|
instance->host->host_no);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
dcmd = &cmd->frame->dcmd;
|
|
|
|
if (!instance->vf_affiliation) {
|
|
dev_warn(&instance->pdev->dev, "SR-IOV: Couldn't get LD/VF "
|
|
"affiliation for scsi%d\n", instance->host->host_no);
|
|
megasas_return_cmd(instance, cmd);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
if (initial)
|
|
memset(instance->vf_affiliation, 0, (MAX_LOGICAL_DRIVES + 1) *
|
|
sizeof(struct MR_LD_VF_AFFILIATION));
|
|
else {
|
|
new_affiliation =
|
|
pci_alloc_consistent(instance->pdev,
|
|
(MAX_LOGICAL_DRIVES + 1) *
|
|
sizeof(struct MR_LD_VF_AFFILIATION),
|
|
&new_affiliation_h);
|
|
if (!new_affiliation) {
|
|
dev_printk(KERN_DEBUG, &instance->pdev->dev, "SR-IOV: Couldn't allocate "
|
|
"memory for new affiliation for scsi%d\n",
|
|
instance->host->host_no);
|
|
megasas_return_cmd(instance, cmd);
|
|
return -ENOMEM;
|
|
}
|
|
memset(new_affiliation, 0, (MAX_LOGICAL_DRIVES + 1) *
|
|
sizeof(struct MR_LD_VF_AFFILIATION));
|
|
}
|
|
|
|
memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
|
|
|
|
dcmd->cmd = MFI_CMD_DCMD;
|
|
dcmd->cmd_status = MFI_STAT_INVALID_STATUS;
|
|
dcmd->sge_count = 1;
|
|
dcmd->flags = cpu_to_le16(MFI_FRAME_DIR_BOTH);
|
|
dcmd->timeout = 0;
|
|
dcmd->pad_0 = 0;
|
|
dcmd->data_xfer_len = cpu_to_le32((MAX_LOGICAL_DRIVES + 1) *
|
|
sizeof(struct MR_LD_VF_AFFILIATION));
|
|
dcmd->opcode = cpu_to_le32(MR_DCMD_LD_VF_MAP_GET_ALL_LDS);
|
|
|
|
if (initial)
|
|
dcmd->sgl.sge32[0].phys_addr =
|
|
cpu_to_le32(instance->vf_affiliation_h);
|
|
else
|
|
dcmd->sgl.sge32[0].phys_addr =
|
|
cpu_to_le32(new_affiliation_h);
|
|
|
|
dcmd->sgl.sge32[0].length = cpu_to_le32((MAX_LOGICAL_DRIVES + 1) *
|
|
sizeof(struct MR_LD_VF_AFFILIATION));
|
|
|
|
dev_warn(&instance->pdev->dev, "SR-IOV: Getting LD/VF affiliation for "
|
|
"scsi%d\n", instance->host->host_no);
|
|
|
|
|
|
if (megasas_issue_blocked_cmd(instance, cmd, 0) != DCMD_SUCCESS) {
|
|
dev_warn(&instance->pdev->dev, "SR-IOV: LD/VF affiliation DCMD"
|
|
" failed with status 0x%x for scsi%d\n",
|
|
dcmd->cmd_status, instance->host->host_no);
|
|
retval = 1; /* Do a scan if we couldn't get affiliation */
|
|
goto out;
|
|
}
|
|
|
|
if (!initial) {
|
|
if (!new_affiliation->ldCount) {
|
|
dev_warn(&instance->pdev->dev, "SR-IOV: Got new LD/VF "
|
|
"affiliation for passive path for scsi%d\n",
|
|
instance->host->host_no);
|
|
retval = 1;
|
|
goto out;
|
|
}
|
|
newmap = new_affiliation->map;
|
|
savedmap = instance->vf_affiliation->map;
|
|
thisVf = new_affiliation->thisVf;
|
|
for (i = 0 ; i < new_affiliation->ldCount; i++) {
|
|
found = 0;
|
|
for (j = 0; j < instance->vf_affiliation->ldCount;
|
|
j++) {
|
|
if (newmap->ref.targetId ==
|
|
savedmap->ref.targetId) {
|
|
found = 1;
|
|
if (newmap->policy[thisVf] !=
|
|
savedmap->policy[thisVf]) {
|
|
doscan = 1;
|
|
goto out;
|
|
}
|
|
}
|
|
savedmap = (struct MR_LD_VF_MAP *)
|
|
((unsigned char *)savedmap +
|
|
savedmap->size);
|
|
}
|
|
if (!found && newmap->policy[thisVf] !=
|
|
MR_LD_ACCESS_HIDDEN) {
|
|
doscan = 1;
|
|
goto out;
|
|
}
|
|
newmap = (struct MR_LD_VF_MAP *)
|
|
((unsigned char *)newmap + newmap->size);
|
|
}
|
|
|
|
newmap = new_affiliation->map;
|
|
savedmap = instance->vf_affiliation->map;
|
|
|
|
for (i = 0 ; i < instance->vf_affiliation->ldCount; i++) {
|
|
found = 0;
|
|
for (j = 0 ; j < new_affiliation->ldCount; j++) {
|
|
if (savedmap->ref.targetId ==
|
|
newmap->ref.targetId) {
|
|
found = 1;
|
|
if (savedmap->policy[thisVf] !=
|
|
newmap->policy[thisVf]) {
|
|
doscan = 1;
|
|
goto out;
|
|
}
|
|
}
|
|
newmap = (struct MR_LD_VF_MAP *)
|
|
((unsigned char *)newmap +
|
|
newmap->size);
|
|
}
|
|
if (!found && savedmap->policy[thisVf] !=
|
|
MR_LD_ACCESS_HIDDEN) {
|
|
doscan = 1;
|
|
goto out;
|
|
}
|
|
savedmap = (struct MR_LD_VF_MAP *)
|
|
((unsigned char *)savedmap +
|
|
savedmap->size);
|
|
}
|
|
}
|
|
out:
|
|
if (doscan) {
|
|
dev_warn(&instance->pdev->dev, "SR-IOV: Got new LD/VF "
|
|
"affiliation for scsi%d\n", instance->host->host_no);
|
|
memcpy(instance->vf_affiliation, new_affiliation,
|
|
new_affiliation->size);
|
|
retval = 1;
|
|
}
|
|
|
|
if (new_affiliation)
|
|
pci_free_consistent(instance->pdev,
|
|
(MAX_LOGICAL_DRIVES + 1) *
|
|
sizeof(struct MR_LD_VF_AFFILIATION),
|
|
new_affiliation, new_affiliation_h);
|
|
megasas_return_cmd(instance, cmd);
|
|
|
|
return retval;
|
|
}
|
|
|
|
/* This function will get the current SR-IOV LD/VF affiliation */
|
|
static int megasas_get_ld_vf_affiliation(struct megasas_instance *instance,
|
|
int initial)
|
|
{
|
|
int retval;
|
|
|
|
if (instance->PlasmaFW111)
|
|
retval = megasas_get_ld_vf_affiliation_111(instance, initial);
|
|
else
|
|
retval = megasas_get_ld_vf_affiliation_12(instance, initial);
|
|
return retval;
|
|
}
|
|
|
|
/* This function will tell FW to start the SR-IOV heartbeat */
|
|
int megasas_sriov_start_heartbeat(struct megasas_instance *instance,
|
|
int initial)
|
|
{
|
|
struct megasas_cmd *cmd;
|
|
struct megasas_dcmd_frame *dcmd;
|
|
int retval = 0;
|
|
|
|
cmd = megasas_get_cmd(instance);
|
|
|
|
if (!cmd) {
|
|
dev_printk(KERN_DEBUG, &instance->pdev->dev, "megasas_sriov_start_heartbeat: "
|
|
"Failed to get cmd for scsi%d\n",
|
|
instance->host->host_no);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
dcmd = &cmd->frame->dcmd;
|
|
|
|
if (initial) {
|
|
instance->hb_host_mem =
|
|
pci_zalloc_consistent(instance->pdev,
|
|
sizeof(struct MR_CTRL_HB_HOST_MEM),
|
|
&instance->hb_host_mem_h);
|
|
if (!instance->hb_host_mem) {
|
|
dev_printk(KERN_DEBUG, &instance->pdev->dev, "SR-IOV: Couldn't allocate"
|
|
" memory for heartbeat host memory for scsi%d\n",
|
|
instance->host->host_no);
|
|
retval = -ENOMEM;
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
|
|
|
|
dcmd->mbox.s[0] = cpu_to_le16(sizeof(struct MR_CTRL_HB_HOST_MEM));
|
|
dcmd->cmd = MFI_CMD_DCMD;
|
|
dcmd->cmd_status = MFI_STAT_INVALID_STATUS;
|
|
dcmd->sge_count = 1;
|
|
dcmd->flags = cpu_to_le16(MFI_FRAME_DIR_BOTH);
|
|
dcmd->timeout = 0;
|
|
dcmd->pad_0 = 0;
|
|
dcmd->data_xfer_len = cpu_to_le32(sizeof(struct MR_CTRL_HB_HOST_MEM));
|
|
dcmd->opcode = cpu_to_le32(MR_DCMD_CTRL_SHARED_HOST_MEM_ALLOC);
|
|
|
|
megasas_set_dma_settings(instance, dcmd, instance->hb_host_mem_h,
|
|
sizeof(struct MR_CTRL_HB_HOST_MEM));
|
|
|
|
dev_warn(&instance->pdev->dev, "SR-IOV: Starting heartbeat for scsi%d\n",
|
|
instance->host->host_no);
|
|
|
|
if ((instance->adapter_type != MFI_SERIES) &&
|
|
!instance->mask_interrupts)
|
|
retval = megasas_issue_blocked_cmd(instance, cmd,
|
|
MEGASAS_ROUTINE_WAIT_TIME_VF);
|
|
else
|
|
retval = megasas_issue_polled(instance, cmd);
|
|
|
|
if (retval) {
|
|
dev_warn(&instance->pdev->dev, "SR-IOV: MR_DCMD_CTRL_SHARED_HOST"
|
|
"_MEM_ALLOC DCMD %s for scsi%d\n",
|
|
(dcmd->cmd_status == MFI_STAT_INVALID_STATUS) ?
|
|
"timed out" : "failed", instance->host->host_no);
|
|
retval = 1;
|
|
}
|
|
|
|
out:
|
|
megasas_return_cmd(instance, cmd);
|
|
|
|
return retval;
|
|
}
|
|
|
|
/* Handler for SR-IOV heartbeat */
|
|
static void megasas_sriov_heartbeat_handler(struct timer_list *t)
|
|
{
|
|
struct megasas_instance *instance =
|
|
from_timer(instance, t, sriov_heartbeat_timer);
|
|
|
|
if (instance->hb_host_mem->HB.fwCounter !=
|
|
instance->hb_host_mem->HB.driverCounter) {
|
|
instance->hb_host_mem->HB.driverCounter =
|
|
instance->hb_host_mem->HB.fwCounter;
|
|
mod_timer(&instance->sriov_heartbeat_timer,
|
|
jiffies + MEGASAS_SRIOV_HEARTBEAT_INTERVAL_VF);
|
|
} else {
|
|
dev_warn(&instance->pdev->dev, "SR-IOV: Heartbeat never "
|
|
"completed for scsi%d\n", instance->host->host_no);
|
|
schedule_work(&instance->work_init);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* megasas_wait_for_outstanding - Wait for all outstanding cmds
|
|
* @instance: Adapter soft state
|
|
*
|
|
* This function waits for up to MEGASAS_RESET_WAIT_TIME seconds for FW to
|
|
* complete all its outstanding commands. Returns error if one or more IOs
|
|
* are pending after this time period. It also marks the controller dead.
|
|
*/
|
|
static int megasas_wait_for_outstanding(struct megasas_instance *instance)
|
|
{
|
|
int i, sl, outstanding;
|
|
u32 reset_index;
|
|
u32 wait_time = MEGASAS_RESET_WAIT_TIME;
|
|
unsigned long flags;
|
|
struct list_head clist_local;
|
|
struct megasas_cmd *reset_cmd;
|
|
u32 fw_state;
|
|
|
|
if (atomic_read(&instance->adprecovery) == MEGASAS_HW_CRITICAL_ERROR) {
|
|
dev_info(&instance->pdev->dev, "%s:%d HBA is killed.\n",
|
|
__func__, __LINE__);
|
|
return FAILED;
|
|
}
|
|
|
|
if (atomic_read(&instance->adprecovery) != MEGASAS_HBA_OPERATIONAL) {
|
|
|
|
INIT_LIST_HEAD(&clist_local);
|
|
spin_lock_irqsave(&instance->hba_lock, flags);
|
|
list_splice_init(&instance->internal_reset_pending_q,
|
|
&clist_local);
|
|
spin_unlock_irqrestore(&instance->hba_lock, flags);
|
|
|
|
dev_notice(&instance->pdev->dev, "HBA reset wait ...\n");
|
|
for (i = 0; i < wait_time; i++) {
|
|
msleep(1000);
|
|
if (atomic_read(&instance->adprecovery) == MEGASAS_HBA_OPERATIONAL)
|
|
break;
|
|
}
|
|
|
|
if (atomic_read(&instance->adprecovery) != MEGASAS_HBA_OPERATIONAL) {
|
|
dev_notice(&instance->pdev->dev, "reset: Stopping HBA.\n");
|
|
atomic_set(&instance->adprecovery, MEGASAS_HW_CRITICAL_ERROR);
|
|
return FAILED;
|
|
}
|
|
|
|
reset_index = 0;
|
|
while (!list_empty(&clist_local)) {
|
|
reset_cmd = list_entry((&clist_local)->next,
|
|
struct megasas_cmd, list);
|
|
list_del_init(&reset_cmd->list);
|
|
if (reset_cmd->scmd) {
|
|
reset_cmd->scmd->result = DID_REQUEUE << 16;
|
|
dev_notice(&instance->pdev->dev, "%d:%p reset [%02x]\n",
|
|
reset_index, reset_cmd,
|
|
reset_cmd->scmd->cmnd[0]);
|
|
|
|
reset_cmd->scmd->scsi_done(reset_cmd->scmd);
|
|
megasas_return_cmd(instance, reset_cmd);
|
|
} else if (reset_cmd->sync_cmd) {
|
|
dev_notice(&instance->pdev->dev, "%p synch cmds"
|
|
"reset queue\n",
|
|
reset_cmd);
|
|
|
|
reset_cmd->cmd_status_drv = MFI_STAT_INVALID_STATUS;
|
|
instance->instancet->fire_cmd(instance,
|
|
reset_cmd->frame_phys_addr,
|
|
0, instance->reg_set);
|
|
} else {
|
|
dev_notice(&instance->pdev->dev, "%p unexpected"
|
|
"cmds lst\n",
|
|
reset_cmd);
|
|
}
|
|
reset_index++;
|
|
}
|
|
|
|
return SUCCESS;
|
|
}
|
|
|
|
for (i = 0; i < resetwaittime; i++) {
|
|
outstanding = atomic_read(&instance->fw_outstanding);
|
|
|
|
if (!outstanding)
|
|
break;
|
|
|
|
if (!(i % MEGASAS_RESET_NOTICE_INTERVAL)) {
|
|
dev_notice(&instance->pdev->dev, "[%2d]waiting for %d "
|
|
"commands to complete\n",i,outstanding);
|
|
/*
|
|
* Call cmd completion routine. Cmd to be
|
|
* be completed directly without depending on isr.
|
|
*/
|
|
megasas_complete_cmd_dpc((unsigned long)instance);
|
|
}
|
|
|
|
msleep(1000);
|
|
}
|
|
|
|
i = 0;
|
|
outstanding = atomic_read(&instance->fw_outstanding);
|
|
fw_state = instance->instancet->read_fw_status_reg(instance->reg_set) & MFI_STATE_MASK;
|
|
|
|
if ((!outstanding && (fw_state == MFI_STATE_OPERATIONAL)))
|
|
goto no_outstanding;
|
|
|
|
if (instance->disableOnlineCtrlReset)
|
|
goto kill_hba_and_failed;
|
|
do {
|
|
if ((fw_state == MFI_STATE_FAULT) || atomic_read(&instance->fw_outstanding)) {
|
|
dev_info(&instance->pdev->dev,
|
|
"%s:%d waiting_for_outstanding: before issue OCR. FW state = 0x%x, oustanding 0x%x\n",
|
|
__func__, __LINE__, fw_state, atomic_read(&instance->fw_outstanding));
|
|
if (i == 3)
|
|
goto kill_hba_and_failed;
|
|
megasas_do_ocr(instance);
|
|
|
|
if (atomic_read(&instance->adprecovery) == MEGASAS_HW_CRITICAL_ERROR) {
|
|
dev_info(&instance->pdev->dev, "%s:%d OCR failed and HBA is killed.\n",
|
|
__func__, __LINE__);
|
|
return FAILED;
|
|
}
|
|
dev_info(&instance->pdev->dev, "%s:%d waiting_for_outstanding: after issue OCR.\n",
|
|
__func__, __LINE__);
|
|
|
|
for (sl = 0; sl < 10; sl++)
|
|
msleep(500);
|
|
|
|
outstanding = atomic_read(&instance->fw_outstanding);
|
|
|
|
fw_state = instance->instancet->read_fw_status_reg(instance->reg_set) & MFI_STATE_MASK;
|
|
if ((!outstanding && (fw_state == MFI_STATE_OPERATIONAL)))
|
|
goto no_outstanding;
|
|
}
|
|
i++;
|
|
} while (i <= 3);
|
|
|
|
no_outstanding:
|
|
|
|
dev_info(&instance->pdev->dev, "%s:%d no more pending commands remain after reset handling.\n",
|
|
__func__, __LINE__);
|
|
return SUCCESS;
|
|
|
|
kill_hba_and_failed:
|
|
|
|
/* Reset not supported, kill adapter */
|
|
dev_info(&instance->pdev->dev, "%s:%d killing adapter scsi%d"
|
|
" disableOnlineCtrlReset %d fw_outstanding %d \n",
|
|
__func__, __LINE__, instance->host->host_no, instance->disableOnlineCtrlReset,
|
|
atomic_read(&instance->fw_outstanding));
|
|
megasas_dump_pending_frames(instance);
|
|
megaraid_sas_kill_hba(instance);
|
|
|
|
return FAILED;
|
|
}
|
|
|
|
/**
|
|
* megasas_generic_reset - Generic reset routine
|
|
* @scmd: Mid-layer SCSI command
|
|
*
|
|
* This routine implements a generic reset handler for device, bus and host
|
|
* reset requests. Device, bus and host specific reset handlers can use this
|
|
* function after they do their specific tasks.
|
|
*/
|
|
static int megasas_generic_reset(struct scsi_cmnd *scmd)
|
|
{
|
|
int ret_val;
|
|
struct megasas_instance *instance;
|
|
|
|
instance = (struct megasas_instance *)scmd->device->host->hostdata;
|
|
|
|
scmd_printk(KERN_NOTICE, scmd, "megasas: RESET cmd=%x retries=%x\n",
|
|
scmd->cmnd[0], scmd->retries);
|
|
|
|
if (atomic_read(&instance->adprecovery) == MEGASAS_HW_CRITICAL_ERROR) {
|
|
dev_err(&instance->pdev->dev, "cannot recover from previous reset failures\n");
|
|
return FAILED;
|
|
}
|
|
|
|
ret_val = megasas_wait_for_outstanding(instance);
|
|
if (ret_val == SUCCESS)
|
|
dev_notice(&instance->pdev->dev, "reset successful\n");
|
|
else
|
|
dev_err(&instance->pdev->dev, "failed to do reset\n");
|
|
|
|
return ret_val;
|
|
}
|
|
|
|
/**
|
|
* megasas_reset_timer - quiesce the adapter if required
|
|
* @scmd: scsi cmnd
|
|
*
|
|
* Sets the FW busy flag and reduces the host->can_queue if the
|
|
* cmd has not been completed within the timeout period.
|
|
*/
|
|
static enum
|
|
blk_eh_timer_return megasas_reset_timer(struct scsi_cmnd *scmd)
|
|
{
|
|
struct megasas_instance *instance;
|
|
unsigned long flags;
|
|
|
|
if (time_after(jiffies, scmd->jiffies_at_alloc +
|
|
(scmd_timeout * 2) * HZ)) {
|
|
return BLK_EH_NOT_HANDLED;
|
|
}
|
|
|
|
instance = (struct megasas_instance *)scmd->device->host->hostdata;
|
|
if (!(instance->flag & MEGASAS_FW_BUSY)) {
|
|
/* FW is busy, throttle IO */
|
|
spin_lock_irqsave(instance->host->host_lock, flags);
|
|
|
|
instance->host->can_queue = instance->throttlequeuedepth;
|
|
instance->last_time = jiffies;
|
|
instance->flag |= MEGASAS_FW_BUSY;
|
|
|
|
spin_unlock_irqrestore(instance->host->host_lock, flags);
|
|
}
|
|
return BLK_EH_RESET_TIMER;
|
|
}
|
|
|
|
/**
|
|
* megasas_dump_frame - This function will dump MPT/MFI frame
|
|
*/
|
|
static inline void
|
|
megasas_dump_frame(void *mpi_request, int sz)
|
|
{
|
|
int i;
|
|
__le32 *mfp = (__le32 *)mpi_request;
|
|
|
|
printk(KERN_INFO "IO request frame:\n\t");
|
|
for (i = 0; i < sz / sizeof(__le32); i++) {
|
|
if (i && ((i % 8) == 0))
|
|
printk("\n\t");
|
|
printk("%08x ", le32_to_cpu(mfp[i]));
|
|
}
|
|
printk("\n");
|
|
}
|
|
|
|
/**
|
|
* megasas_reset_bus_host - Bus & host reset handler entry point
|
|
*/
|
|
static int megasas_reset_bus_host(struct scsi_cmnd *scmd)
|
|
{
|
|
int ret;
|
|
struct megasas_instance *instance;
|
|
|
|
instance = (struct megasas_instance *)scmd->device->host->hostdata;
|
|
|
|
scmd_printk(KERN_INFO, scmd,
|
|
"Controller reset is requested due to IO timeout\n"
|
|
"SCSI command pointer: (%p)\t SCSI host state: %d\t"
|
|
" SCSI host busy: %d\t FW outstanding: %d\n",
|
|
scmd, scmd->device->host->shost_state,
|
|
atomic_read((atomic_t *)&scmd->device->host->host_busy),
|
|
atomic_read(&instance->fw_outstanding));
|
|
|
|
/*
|
|
* First wait for all commands to complete
|
|
*/
|
|
if (instance->adapter_type == MFI_SERIES) {
|
|
ret = megasas_generic_reset(scmd);
|
|
} else {
|
|
struct megasas_cmd_fusion *cmd;
|
|
cmd = (struct megasas_cmd_fusion *)scmd->SCp.ptr;
|
|
if (cmd)
|
|
megasas_dump_frame(cmd->io_request,
|
|
MEGA_MPI2_RAID_DEFAULT_IO_FRAME_SIZE);
|
|
ret = megasas_reset_fusion(scmd->device->host,
|
|
SCSIIO_TIMEOUT_OCR);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* megasas_task_abort - Issues task abort request to firmware
|
|
* (supported only for fusion adapters)
|
|
* @scmd: SCSI command pointer
|
|
*/
|
|
static int megasas_task_abort(struct scsi_cmnd *scmd)
|
|
{
|
|
int ret;
|
|
struct megasas_instance *instance;
|
|
|
|
instance = (struct megasas_instance *)scmd->device->host->hostdata;
|
|
|
|
if (instance->adapter_type != MFI_SERIES)
|
|
ret = megasas_task_abort_fusion(scmd);
|
|
else {
|
|
sdev_printk(KERN_NOTICE, scmd->device, "TASK ABORT not supported\n");
|
|
ret = FAILED;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* megasas_reset_target: Issues target reset request to firmware
|
|
* (supported only for fusion adapters)
|
|
* @scmd: SCSI command pointer
|
|
*/
|
|
static int megasas_reset_target(struct scsi_cmnd *scmd)
|
|
{
|
|
int ret;
|
|
struct megasas_instance *instance;
|
|
|
|
instance = (struct megasas_instance *)scmd->device->host->hostdata;
|
|
|
|
if (instance->adapter_type != MFI_SERIES)
|
|
ret = megasas_reset_target_fusion(scmd);
|
|
else {
|
|
sdev_printk(KERN_NOTICE, scmd->device, "TARGET RESET not supported\n");
|
|
ret = FAILED;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* megasas_bios_param - Returns disk geometry for a disk
|
|
* @sdev: device handle
|
|
* @bdev: block device
|
|
* @capacity: drive capacity
|
|
* @geom: geometry parameters
|
|
*/
|
|
static int
|
|
megasas_bios_param(struct scsi_device *sdev, struct block_device *bdev,
|
|
sector_t capacity, int geom[])
|
|
{
|
|
int heads;
|
|
int sectors;
|
|
sector_t cylinders;
|
|
unsigned long tmp;
|
|
|
|
/* Default heads (64) & sectors (32) */
|
|
heads = 64;
|
|
sectors = 32;
|
|
|
|
tmp = heads * sectors;
|
|
cylinders = capacity;
|
|
|
|
sector_div(cylinders, tmp);
|
|
|
|
/*
|
|
* Handle extended translation size for logical drives > 1Gb
|
|
*/
|
|
|
|
if (capacity >= 0x200000) {
|
|
heads = 255;
|
|
sectors = 63;
|
|
tmp = heads*sectors;
|
|
cylinders = capacity;
|
|
sector_div(cylinders, tmp);
|
|
}
|
|
|
|
geom[0] = heads;
|
|
geom[1] = sectors;
|
|
geom[2] = cylinders;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void megasas_aen_polling(struct work_struct *work);
|
|
|
|
/**
|
|
* megasas_service_aen - Processes an event notification
|
|
* @instance: Adapter soft state
|
|
* @cmd: AEN command completed by the ISR
|
|
*
|
|
* For AEN, driver sends a command down to FW that is held by the FW till an
|
|
* event occurs. When an event of interest occurs, FW completes the command
|
|
* that it was previously holding.
|
|
*
|
|
* This routines sends SIGIO signal to processes that have registered with the
|
|
* driver for AEN.
|
|
*/
|
|
static void
|
|
megasas_service_aen(struct megasas_instance *instance, struct megasas_cmd *cmd)
|
|
{
|
|
unsigned long flags;
|
|
|
|
/*
|
|
* Don't signal app if it is just an aborted previously registered aen
|
|
*/
|
|
if ((!cmd->abort_aen) && (instance->unload == 0)) {
|
|
spin_lock_irqsave(&poll_aen_lock, flags);
|
|
megasas_poll_wait_aen = 1;
|
|
spin_unlock_irqrestore(&poll_aen_lock, flags);
|
|
wake_up(&megasas_poll_wait);
|
|
kill_fasync(&megasas_async_queue, SIGIO, POLL_IN);
|
|
}
|
|
else
|
|
cmd->abort_aen = 0;
|
|
|
|
instance->aen_cmd = NULL;
|
|
|
|
megasas_return_cmd(instance, cmd);
|
|
|
|
if ((instance->unload == 0) &&
|
|
((instance->issuepend_done == 1))) {
|
|
struct megasas_aen_event *ev;
|
|
|
|
ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
|
|
if (!ev) {
|
|
dev_err(&instance->pdev->dev, "megasas_service_aen: out of memory\n");
|
|
} else {
|
|
ev->instance = instance;
|
|
instance->ev = ev;
|
|
INIT_DELAYED_WORK(&ev->hotplug_work,
|
|
megasas_aen_polling);
|
|
schedule_delayed_work(&ev->hotplug_work, 0);
|
|
}
|
|
}
|
|
}
|
|
|
|
static ssize_t
|
|
megasas_fw_crash_buffer_store(struct device *cdev,
|
|
struct device_attribute *attr, const char *buf, size_t count)
|
|
{
|
|
struct Scsi_Host *shost = class_to_shost(cdev);
|
|
struct megasas_instance *instance =
|
|
(struct megasas_instance *) shost->hostdata;
|
|
int val = 0;
|
|
unsigned long flags;
|
|
|
|
if (kstrtoint(buf, 0, &val) != 0)
|
|
return -EINVAL;
|
|
|
|
spin_lock_irqsave(&instance->crashdump_lock, flags);
|
|
instance->fw_crash_buffer_offset = val;
|
|
spin_unlock_irqrestore(&instance->crashdump_lock, flags);
|
|
return strlen(buf);
|
|
}
|
|
|
|
static ssize_t
|
|
megasas_fw_crash_buffer_show(struct device *cdev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct Scsi_Host *shost = class_to_shost(cdev);
|
|
struct megasas_instance *instance =
|
|
(struct megasas_instance *) shost->hostdata;
|
|
u32 size;
|
|
unsigned long buff_addr;
|
|
unsigned long dmachunk = CRASH_DMA_BUF_SIZE;
|
|
unsigned long src_addr;
|
|
unsigned long flags;
|
|
u32 buff_offset;
|
|
|
|
spin_lock_irqsave(&instance->crashdump_lock, flags);
|
|
buff_offset = instance->fw_crash_buffer_offset;
|
|
if (!instance->crash_dump_buf &&
|
|
!((instance->fw_crash_state == AVAILABLE) ||
|
|
(instance->fw_crash_state == COPYING))) {
|
|
dev_err(&instance->pdev->dev,
|
|
"Firmware crash dump is not available\n");
|
|
spin_unlock_irqrestore(&instance->crashdump_lock, flags);
|
|
return -EINVAL;
|
|
}
|
|
|
|
buff_addr = (unsigned long) buf;
|
|
|
|
if (buff_offset > (instance->fw_crash_buffer_size * dmachunk)) {
|
|
dev_err(&instance->pdev->dev,
|
|
"Firmware crash dump offset is out of range\n");
|
|
spin_unlock_irqrestore(&instance->crashdump_lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
size = (instance->fw_crash_buffer_size * dmachunk) - buff_offset;
|
|
size = (size >= PAGE_SIZE) ? (PAGE_SIZE - 1) : size;
|
|
|
|
src_addr = (unsigned long)instance->crash_buf[buff_offset / dmachunk] +
|
|
(buff_offset % dmachunk);
|
|
memcpy(buf, (void *)src_addr, size);
|
|
spin_unlock_irqrestore(&instance->crashdump_lock, flags);
|
|
|
|
return size;
|
|
}
|
|
|
|
static ssize_t
|
|
megasas_fw_crash_buffer_size_show(struct device *cdev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct Scsi_Host *shost = class_to_shost(cdev);
|
|
struct megasas_instance *instance =
|
|
(struct megasas_instance *) shost->hostdata;
|
|
|
|
return snprintf(buf, PAGE_SIZE, "%ld\n", (unsigned long)
|
|
((instance->fw_crash_buffer_size) * 1024 * 1024)/PAGE_SIZE);
|
|
}
|
|
|
|
static ssize_t
|
|
megasas_fw_crash_state_store(struct device *cdev,
|
|
struct device_attribute *attr, const char *buf, size_t count)
|
|
{
|
|
struct Scsi_Host *shost = class_to_shost(cdev);
|
|
struct megasas_instance *instance =
|
|
(struct megasas_instance *) shost->hostdata;
|
|
int val = 0;
|
|
unsigned long flags;
|
|
|
|
if (kstrtoint(buf, 0, &val) != 0)
|
|
return -EINVAL;
|
|
|
|
if ((val <= AVAILABLE || val > COPY_ERROR)) {
|
|
dev_err(&instance->pdev->dev, "application updates invalid "
|
|
"firmware crash state\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
instance->fw_crash_state = val;
|
|
|
|
if ((val == COPIED) || (val == COPY_ERROR)) {
|
|
spin_lock_irqsave(&instance->crashdump_lock, flags);
|
|
megasas_free_host_crash_buffer(instance);
|
|
spin_unlock_irqrestore(&instance->crashdump_lock, flags);
|
|
if (val == COPY_ERROR)
|
|
dev_info(&instance->pdev->dev, "application failed to "
|
|
"copy Firmware crash dump\n");
|
|
else
|
|
dev_info(&instance->pdev->dev, "Firmware crash dump "
|
|
"copied successfully\n");
|
|
}
|
|
return strlen(buf);
|
|
}
|
|
|
|
static ssize_t
|
|
megasas_fw_crash_state_show(struct device *cdev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct Scsi_Host *shost = class_to_shost(cdev);
|
|
struct megasas_instance *instance =
|
|
(struct megasas_instance *) shost->hostdata;
|
|
|
|
return snprintf(buf, PAGE_SIZE, "%d\n", instance->fw_crash_state);
|
|
}
|
|
|
|
static ssize_t
|
|
megasas_page_size_show(struct device *cdev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
return snprintf(buf, PAGE_SIZE, "%ld\n", (unsigned long)PAGE_SIZE - 1);
|
|
}
|
|
|
|
static ssize_t
|
|
megasas_ldio_outstanding_show(struct device *cdev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct Scsi_Host *shost = class_to_shost(cdev);
|
|
struct megasas_instance *instance = (struct megasas_instance *)shost->hostdata;
|
|
|
|
return snprintf(buf, PAGE_SIZE, "%d\n", atomic_read(&instance->ldio_outstanding));
|
|
}
|
|
|
|
static DEVICE_ATTR(fw_crash_buffer, S_IRUGO | S_IWUSR,
|
|
megasas_fw_crash_buffer_show, megasas_fw_crash_buffer_store);
|
|
static DEVICE_ATTR(fw_crash_buffer_size, S_IRUGO,
|
|
megasas_fw_crash_buffer_size_show, NULL);
|
|
static DEVICE_ATTR(fw_crash_state, S_IRUGO | S_IWUSR,
|
|
megasas_fw_crash_state_show, megasas_fw_crash_state_store);
|
|
static DEVICE_ATTR(page_size, S_IRUGO,
|
|
megasas_page_size_show, NULL);
|
|
static DEVICE_ATTR(ldio_outstanding, S_IRUGO,
|
|
megasas_ldio_outstanding_show, NULL);
|
|
|
|
struct device_attribute *megaraid_host_attrs[] = {
|
|
&dev_attr_fw_crash_buffer_size,
|
|
&dev_attr_fw_crash_buffer,
|
|
&dev_attr_fw_crash_state,
|
|
&dev_attr_page_size,
|
|
&dev_attr_ldio_outstanding,
|
|
NULL,
|
|
};
|
|
|
|
/*
|
|
* Scsi host template for megaraid_sas driver
|
|
*/
|
|
static struct scsi_host_template megasas_template = {
|
|
|
|
.module = THIS_MODULE,
|
|
.name = "Avago SAS based MegaRAID driver",
|
|
.proc_name = "megaraid_sas",
|
|
.slave_configure = megasas_slave_configure,
|
|
.slave_alloc = megasas_slave_alloc,
|
|
.slave_destroy = megasas_slave_destroy,
|
|
.queuecommand = megasas_queue_command,
|
|
.eh_target_reset_handler = megasas_reset_target,
|
|
.eh_abort_handler = megasas_task_abort,
|
|
.eh_host_reset_handler = megasas_reset_bus_host,
|
|
.eh_timed_out = megasas_reset_timer,
|
|
.shost_attrs = megaraid_host_attrs,
|
|
.bios_param = megasas_bios_param,
|
|
.use_clustering = ENABLE_CLUSTERING,
|
|
.change_queue_depth = scsi_change_queue_depth,
|
|
.no_write_same = 1,
|
|
};
|
|
|
|
/**
|
|
* megasas_complete_int_cmd - Completes an internal command
|
|
* @instance: Adapter soft state
|
|
* @cmd: Command to be completed
|
|
*
|
|
* The megasas_issue_blocked_cmd() function waits for a command to complete
|
|
* after it issues a command. This function wakes up that waiting routine by
|
|
* calling wake_up() on the wait queue.
|
|
*/
|
|
static void
|
|
megasas_complete_int_cmd(struct megasas_instance *instance,
|
|
struct megasas_cmd *cmd)
|
|
{
|
|
cmd->cmd_status_drv = cmd->frame->io.cmd_status;
|
|
wake_up(&instance->int_cmd_wait_q);
|
|
}
|
|
|
|
/**
|
|
* megasas_complete_abort - Completes aborting a command
|
|
* @instance: Adapter soft state
|
|
* @cmd: Cmd that was issued to abort another cmd
|
|
*
|
|
* The megasas_issue_blocked_abort_cmd() function waits on abort_cmd_wait_q
|
|
* after it issues an abort on a previously issued command. This function
|
|
* wakes up all functions waiting on the same wait queue.
|
|
*/
|
|
static void
|
|
megasas_complete_abort(struct megasas_instance *instance,
|
|
struct megasas_cmd *cmd)
|
|
{
|
|
if (cmd->sync_cmd) {
|
|
cmd->sync_cmd = 0;
|
|
cmd->cmd_status_drv = 0;
|
|
wake_up(&instance->abort_cmd_wait_q);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* megasas_complete_cmd - Completes a command
|
|
* @instance: Adapter soft state
|
|
* @cmd: Command to be completed
|
|
* @alt_status: If non-zero, use this value as status to
|
|
* SCSI mid-layer instead of the value returned
|
|
* by the FW. This should be used if caller wants
|
|
* an alternate status (as in the case of aborted
|
|
* commands)
|
|
*/
|
|
void
|
|
megasas_complete_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd,
|
|
u8 alt_status)
|
|
{
|
|
int exception = 0;
|
|
struct megasas_header *hdr = &cmd->frame->hdr;
|
|
unsigned long flags;
|
|
struct fusion_context *fusion = instance->ctrl_context;
|
|
u32 opcode, status;
|
|
|
|
/* flag for the retry reset */
|
|
cmd->retry_for_fw_reset = 0;
|
|
|
|
if (cmd->scmd)
|
|
cmd->scmd->SCp.ptr = NULL;
|
|
|
|
switch (hdr->cmd) {
|
|
case MFI_CMD_INVALID:
|
|
/* Some older 1068 controller FW may keep a pended
|
|
MR_DCMD_CTRL_EVENT_GET_INFO left over from the main kernel
|
|
when booting the kdump kernel. Ignore this command to
|
|
prevent a kernel panic on shutdown of the kdump kernel. */
|
|
dev_warn(&instance->pdev->dev, "MFI_CMD_INVALID command "
|
|
"completed\n");
|
|
dev_warn(&instance->pdev->dev, "If you have a controller "
|
|
"other than PERC5, please upgrade your firmware\n");
|
|
break;
|
|
case MFI_CMD_PD_SCSI_IO:
|
|
case MFI_CMD_LD_SCSI_IO:
|
|
|
|
/*
|
|
* MFI_CMD_PD_SCSI_IO and MFI_CMD_LD_SCSI_IO could have been
|
|
* issued either through an IO path or an IOCTL path. If it
|
|
* was via IOCTL, we will send it to internal completion.
|
|
*/
|
|
if (cmd->sync_cmd) {
|
|
cmd->sync_cmd = 0;
|
|
megasas_complete_int_cmd(instance, cmd);
|
|
break;
|
|
}
|
|
|
|
case MFI_CMD_LD_READ:
|
|
case MFI_CMD_LD_WRITE:
|
|
|
|
if (alt_status) {
|
|
cmd->scmd->result = alt_status << 16;
|
|
exception = 1;
|
|
}
|
|
|
|
if (exception) {
|
|
|
|
atomic_dec(&instance->fw_outstanding);
|
|
|
|
scsi_dma_unmap(cmd->scmd);
|
|
cmd->scmd->scsi_done(cmd->scmd);
|
|
megasas_return_cmd(instance, cmd);
|
|
|
|
break;
|
|
}
|
|
|
|
switch (hdr->cmd_status) {
|
|
|
|
case MFI_STAT_OK:
|
|
cmd->scmd->result = DID_OK << 16;
|
|
break;
|
|
|
|
case MFI_STAT_SCSI_IO_FAILED:
|
|
case MFI_STAT_LD_INIT_IN_PROGRESS:
|
|
cmd->scmd->result =
|
|
(DID_ERROR << 16) | hdr->scsi_status;
|
|
break;
|
|
|
|
case MFI_STAT_SCSI_DONE_WITH_ERROR:
|
|
|
|
cmd->scmd->result = (DID_OK << 16) | hdr->scsi_status;
|
|
|
|
if (hdr->scsi_status == SAM_STAT_CHECK_CONDITION) {
|
|
memset(cmd->scmd->sense_buffer, 0,
|
|
SCSI_SENSE_BUFFERSIZE);
|
|
memcpy(cmd->scmd->sense_buffer, cmd->sense,
|
|
hdr->sense_len);
|
|
|
|
cmd->scmd->result |= DRIVER_SENSE << 24;
|
|
}
|
|
|
|
break;
|
|
|
|
case MFI_STAT_LD_OFFLINE:
|
|
case MFI_STAT_DEVICE_NOT_FOUND:
|
|
cmd->scmd->result = DID_BAD_TARGET << 16;
|
|
break;
|
|
|
|
default:
|
|
dev_printk(KERN_DEBUG, &instance->pdev->dev, "MFI FW status %#x\n",
|
|
hdr->cmd_status);
|
|
cmd->scmd->result = DID_ERROR << 16;
|
|
break;
|
|
}
|
|
|
|
atomic_dec(&instance->fw_outstanding);
|
|
|
|
scsi_dma_unmap(cmd->scmd);
|
|
cmd->scmd->scsi_done(cmd->scmd);
|
|
megasas_return_cmd(instance, cmd);
|
|
|
|
break;
|
|
|
|
case MFI_CMD_SMP:
|
|
case MFI_CMD_STP:
|
|
megasas_complete_int_cmd(instance, cmd);
|
|
break;
|
|
|
|
case MFI_CMD_DCMD:
|
|
opcode = le32_to_cpu(cmd->frame->dcmd.opcode);
|
|
/* Check for LD map update */
|
|
if ((opcode == MR_DCMD_LD_MAP_GET_INFO)
|
|
&& (cmd->frame->dcmd.mbox.b[1] == 1)) {
|
|
fusion->fast_path_io = 0;
|
|
spin_lock_irqsave(instance->host->host_lock, flags);
|
|
instance->map_update_cmd = NULL;
|
|
if (cmd->frame->hdr.cmd_status != 0) {
|
|
if (cmd->frame->hdr.cmd_status !=
|
|
MFI_STAT_NOT_FOUND)
|
|
dev_warn(&instance->pdev->dev, "map syncfailed, status = 0x%x\n",
|
|
cmd->frame->hdr.cmd_status);
|
|
else {
|
|
megasas_return_cmd(instance, cmd);
|
|
spin_unlock_irqrestore(
|
|
instance->host->host_lock,
|
|
flags);
|
|
break;
|
|
}
|
|
} else
|
|
instance->map_id++;
|
|
megasas_return_cmd(instance, cmd);
|
|
|
|
/*
|
|
* Set fast path IO to ZERO.
|
|
* Validate Map will set proper value.
|
|
* Meanwhile all IOs will go as LD IO.
|
|
*/
|
|
if (MR_ValidateMapInfo(instance))
|
|
fusion->fast_path_io = 1;
|
|
else
|
|
fusion->fast_path_io = 0;
|
|
megasas_sync_map_info(instance);
|
|
spin_unlock_irqrestore(instance->host->host_lock,
|
|
flags);
|
|
break;
|
|
}
|
|
if (opcode == MR_DCMD_CTRL_EVENT_GET_INFO ||
|
|
opcode == MR_DCMD_CTRL_EVENT_GET) {
|
|
spin_lock_irqsave(&poll_aen_lock, flags);
|
|
megasas_poll_wait_aen = 0;
|
|
spin_unlock_irqrestore(&poll_aen_lock, flags);
|
|
}
|
|
|
|
/* FW has an updated PD sequence */
|
|
if ((opcode == MR_DCMD_SYSTEM_PD_MAP_GET_INFO) &&
|
|
(cmd->frame->dcmd.mbox.b[0] == 1)) {
|
|
|
|
spin_lock_irqsave(instance->host->host_lock, flags);
|
|
status = cmd->frame->hdr.cmd_status;
|
|
instance->jbod_seq_cmd = NULL;
|
|
megasas_return_cmd(instance, cmd);
|
|
|
|
if (status == MFI_STAT_OK) {
|
|
instance->pd_seq_map_id++;
|
|
/* Re-register a pd sync seq num cmd */
|
|
if (megasas_sync_pd_seq_num(instance, true))
|
|
instance->use_seqnum_jbod_fp = false;
|
|
} else
|
|
instance->use_seqnum_jbod_fp = false;
|
|
|
|
spin_unlock_irqrestore(instance->host->host_lock, flags);
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* See if got an event notification
|
|
*/
|
|
if (opcode == MR_DCMD_CTRL_EVENT_WAIT)
|
|
megasas_service_aen(instance, cmd);
|
|
else
|
|
megasas_complete_int_cmd(instance, cmd);
|
|
|
|
break;
|
|
|
|
case MFI_CMD_ABORT:
|
|
/*
|
|
* Cmd issued to abort another cmd returned
|
|
*/
|
|
megasas_complete_abort(instance, cmd);
|
|
break;
|
|
|
|
default:
|
|
dev_info(&instance->pdev->dev, "Unknown command completed! [0x%X]\n",
|
|
hdr->cmd);
|
|
megasas_complete_int_cmd(instance, cmd);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* megasas_issue_pending_cmds_again - issue all pending cmds
|
|
* in FW again because of the fw reset
|
|
* @instance: Adapter soft state
|
|
*/
|
|
static inline void
|
|
megasas_issue_pending_cmds_again(struct megasas_instance *instance)
|
|
{
|
|
struct megasas_cmd *cmd;
|
|
struct list_head clist_local;
|
|
union megasas_evt_class_locale class_locale;
|
|
unsigned long flags;
|
|
u32 seq_num;
|
|
|
|
INIT_LIST_HEAD(&clist_local);
|
|
spin_lock_irqsave(&instance->hba_lock, flags);
|
|
list_splice_init(&instance->internal_reset_pending_q, &clist_local);
|
|
spin_unlock_irqrestore(&instance->hba_lock, flags);
|
|
|
|
while (!list_empty(&clist_local)) {
|
|
cmd = list_entry((&clist_local)->next,
|
|
struct megasas_cmd, list);
|
|
list_del_init(&cmd->list);
|
|
|
|
if (cmd->sync_cmd || cmd->scmd) {
|
|
dev_notice(&instance->pdev->dev, "command %p, %p:%d"
|
|
"detected to be pending while HBA reset\n",
|
|
cmd, cmd->scmd, cmd->sync_cmd);
|
|
|
|
cmd->retry_for_fw_reset++;
|
|
|
|
if (cmd->retry_for_fw_reset == 3) {
|
|
dev_notice(&instance->pdev->dev, "cmd %p, %p:%d"
|
|
"was tried multiple times during reset."
|
|
"Shutting down the HBA\n",
|
|
cmd, cmd->scmd, cmd->sync_cmd);
|
|
instance->instancet->disable_intr(instance);
|
|
atomic_set(&instance->fw_reset_no_pci_access, 1);
|
|
megaraid_sas_kill_hba(instance);
|
|
return;
|
|
}
|
|
}
|
|
|
|
if (cmd->sync_cmd == 1) {
|
|
if (cmd->scmd) {
|
|
dev_notice(&instance->pdev->dev, "unexpected"
|
|
"cmd attached to internal command!\n");
|
|
}
|
|
dev_notice(&instance->pdev->dev, "%p synchronous cmd"
|
|
"on the internal reset queue,"
|
|
"issue it again.\n", cmd);
|
|
cmd->cmd_status_drv = MFI_STAT_INVALID_STATUS;
|
|
instance->instancet->fire_cmd(instance,
|
|
cmd->frame_phys_addr,
|
|
0, instance->reg_set);
|
|
} else if (cmd->scmd) {
|
|
dev_notice(&instance->pdev->dev, "%p scsi cmd [%02x]"
|
|
"detected on the internal queue, issue again.\n",
|
|
cmd, cmd->scmd->cmnd[0]);
|
|
|
|
atomic_inc(&instance->fw_outstanding);
|
|
instance->instancet->fire_cmd(instance,
|
|
cmd->frame_phys_addr,
|
|
cmd->frame_count-1, instance->reg_set);
|
|
} else {
|
|
dev_notice(&instance->pdev->dev, "%p unexpected cmd on the"
|
|
"internal reset defer list while re-issue!!\n",
|
|
cmd);
|
|
}
|
|
}
|
|
|
|
if (instance->aen_cmd) {
|
|
dev_notice(&instance->pdev->dev, "aen_cmd in def process\n");
|
|
megasas_return_cmd(instance, instance->aen_cmd);
|
|
|
|
instance->aen_cmd = NULL;
|
|
}
|
|
|
|
/*
|
|
* Initiate AEN (Asynchronous Event Notification)
|
|
*/
|
|
seq_num = instance->last_seq_num;
|
|
class_locale.members.reserved = 0;
|
|
class_locale.members.locale = MR_EVT_LOCALE_ALL;
|
|
class_locale.members.class = MR_EVT_CLASS_DEBUG;
|
|
|
|
megasas_register_aen(instance, seq_num, class_locale.word);
|
|
}
|
|
|
|
/**
|
|
* Move the internal reset pending commands to a deferred queue.
|
|
*
|
|
* We move the commands pending at internal reset time to a
|
|
* pending queue. This queue would be flushed after successful
|
|
* completion of the internal reset sequence. if the internal reset
|
|
* did not complete in time, the kernel reset handler would flush
|
|
* these commands.
|
|
**/
|
|
static void
|
|
megasas_internal_reset_defer_cmds(struct megasas_instance *instance)
|
|
{
|
|
struct megasas_cmd *cmd;
|
|
int i;
|
|
u16 max_cmd = instance->max_fw_cmds;
|
|
u32 defer_index;
|
|
unsigned long flags;
|
|
|
|
defer_index = 0;
|
|
spin_lock_irqsave(&instance->mfi_pool_lock, flags);
|
|
for (i = 0; i < max_cmd; i++) {
|
|
cmd = instance->cmd_list[i];
|
|
if (cmd->sync_cmd == 1 || cmd->scmd) {
|
|
dev_notice(&instance->pdev->dev, "moving cmd[%d]:%p:%d:%p"
|
|
"on the defer queue as internal\n",
|
|
defer_index, cmd, cmd->sync_cmd, cmd->scmd);
|
|
|
|
if (!list_empty(&cmd->list)) {
|
|
dev_notice(&instance->pdev->dev, "ERROR while"
|
|
" moving this cmd:%p, %d %p, it was"
|
|
"discovered on some list?\n",
|
|
cmd, cmd->sync_cmd, cmd->scmd);
|
|
|
|
list_del_init(&cmd->list);
|
|
}
|
|
defer_index++;
|
|
list_add_tail(&cmd->list,
|
|
&instance->internal_reset_pending_q);
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&instance->mfi_pool_lock, flags);
|
|
}
|
|
|
|
|
|
static void
|
|
process_fw_state_change_wq(struct work_struct *work)
|
|
{
|
|
struct megasas_instance *instance =
|
|
container_of(work, struct megasas_instance, work_init);
|
|
u32 wait;
|
|
unsigned long flags;
|
|
|
|
if (atomic_read(&instance->adprecovery) != MEGASAS_ADPRESET_SM_INFAULT) {
|
|
dev_notice(&instance->pdev->dev, "error, recovery st %x\n",
|
|
atomic_read(&instance->adprecovery));
|
|
return ;
|
|
}
|
|
|
|
if (atomic_read(&instance->adprecovery) == MEGASAS_ADPRESET_SM_INFAULT) {
|
|
dev_notice(&instance->pdev->dev, "FW detected to be in fault"
|
|
"state, restarting it...\n");
|
|
|
|
instance->instancet->disable_intr(instance);
|
|
atomic_set(&instance->fw_outstanding, 0);
|
|
|
|
atomic_set(&instance->fw_reset_no_pci_access, 1);
|
|
instance->instancet->adp_reset(instance, instance->reg_set);
|
|
atomic_set(&instance->fw_reset_no_pci_access, 0);
|
|
|
|
dev_notice(&instance->pdev->dev, "FW restarted successfully,"
|
|
"initiating next stage...\n");
|
|
|
|
dev_notice(&instance->pdev->dev, "HBA recovery state machine,"
|
|
"state 2 starting...\n");
|
|
|
|
/* waiting for about 20 second before start the second init */
|
|
for (wait = 0; wait < 30; wait++) {
|
|
msleep(1000);
|
|
}
|
|
|
|
if (megasas_transition_to_ready(instance, 1)) {
|
|
dev_notice(&instance->pdev->dev, "adapter not ready\n");
|
|
|
|
atomic_set(&instance->fw_reset_no_pci_access, 1);
|
|
megaraid_sas_kill_hba(instance);
|
|
return ;
|
|
}
|
|
|
|
if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS1064R) ||
|
|
(instance->pdev->device == PCI_DEVICE_ID_DELL_PERC5) ||
|
|
(instance->pdev->device == PCI_DEVICE_ID_LSI_VERDE_ZCR)
|
|
) {
|
|
*instance->consumer = *instance->producer;
|
|
} else {
|
|
*instance->consumer = 0;
|
|
*instance->producer = 0;
|
|
}
|
|
|
|
megasas_issue_init_mfi(instance);
|
|
|
|
spin_lock_irqsave(&instance->hba_lock, flags);
|
|
atomic_set(&instance->adprecovery, MEGASAS_HBA_OPERATIONAL);
|
|
spin_unlock_irqrestore(&instance->hba_lock, flags);
|
|
instance->instancet->enable_intr(instance);
|
|
|
|
megasas_issue_pending_cmds_again(instance);
|
|
instance->issuepend_done = 1;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* megasas_deplete_reply_queue - Processes all completed commands
|
|
* @instance: Adapter soft state
|
|
* @alt_status: Alternate status to be returned to
|
|
* SCSI mid-layer instead of the status
|
|
* returned by the FW
|
|
* Note: this must be called with hba lock held
|
|
*/
|
|
static int
|
|
megasas_deplete_reply_queue(struct megasas_instance *instance,
|
|
u8 alt_status)
|
|
{
|
|
u32 mfiStatus;
|
|
u32 fw_state;
|
|
|
|
if ((mfiStatus = instance->instancet->check_reset(instance,
|
|
instance->reg_set)) == 1) {
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
if ((mfiStatus = instance->instancet->clear_intr(
|
|
instance->reg_set)
|
|
) == 0) {
|
|
/* Hardware may not set outbound_intr_status in MSI-X mode */
|
|
if (!instance->msix_vectors)
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
instance->mfiStatus = mfiStatus;
|
|
|
|
if ((mfiStatus & MFI_INTR_FLAG_FIRMWARE_STATE_CHANGE)) {
|
|
fw_state = instance->instancet->read_fw_status_reg(
|
|
instance->reg_set) & MFI_STATE_MASK;
|
|
|
|
if (fw_state != MFI_STATE_FAULT) {
|
|
dev_notice(&instance->pdev->dev, "fw state:%x\n",
|
|
fw_state);
|
|
}
|
|
|
|
if ((fw_state == MFI_STATE_FAULT) &&
|
|
(instance->disableOnlineCtrlReset == 0)) {
|
|
dev_notice(&instance->pdev->dev, "wait adp restart\n");
|
|
|
|
if ((instance->pdev->device ==
|
|
PCI_DEVICE_ID_LSI_SAS1064R) ||
|
|
(instance->pdev->device ==
|
|
PCI_DEVICE_ID_DELL_PERC5) ||
|
|
(instance->pdev->device ==
|
|
PCI_DEVICE_ID_LSI_VERDE_ZCR)) {
|
|
|
|
*instance->consumer =
|
|
cpu_to_le32(MEGASAS_ADPRESET_INPROG_SIGN);
|
|
}
|
|
|
|
|
|
instance->instancet->disable_intr(instance);
|
|
atomic_set(&instance->adprecovery, MEGASAS_ADPRESET_SM_INFAULT);
|
|
instance->issuepend_done = 0;
|
|
|
|
atomic_set(&instance->fw_outstanding, 0);
|
|
megasas_internal_reset_defer_cmds(instance);
|
|
|
|
dev_notice(&instance->pdev->dev, "fwState=%x, stage:%d\n",
|
|
fw_state, atomic_read(&instance->adprecovery));
|
|
|
|
schedule_work(&instance->work_init);
|
|
return IRQ_HANDLED;
|
|
|
|
} else {
|
|
dev_notice(&instance->pdev->dev, "fwstate:%x, dis_OCR=%x\n",
|
|
fw_state, instance->disableOnlineCtrlReset);
|
|
}
|
|
}
|
|
|
|
tasklet_schedule(&instance->isr_tasklet);
|
|
return IRQ_HANDLED;
|
|
}
|
|
/**
|
|
* megasas_isr - isr entry point
|
|
*/
|
|
static irqreturn_t megasas_isr(int irq, void *devp)
|
|
{
|
|
struct megasas_irq_context *irq_context = devp;
|
|
struct megasas_instance *instance = irq_context->instance;
|
|
unsigned long flags;
|
|
irqreturn_t rc;
|
|
|
|
if (atomic_read(&instance->fw_reset_no_pci_access))
|
|
return IRQ_HANDLED;
|
|
|
|
spin_lock_irqsave(&instance->hba_lock, flags);
|
|
rc = megasas_deplete_reply_queue(instance, DID_OK);
|
|
spin_unlock_irqrestore(&instance->hba_lock, flags);
|
|
|
|
return rc;
|
|
}
|
|
|
|
/**
|
|
* megasas_transition_to_ready - Move the FW to READY state
|
|
* @instance: Adapter soft state
|
|
*
|
|
* During the initialization, FW passes can potentially be in any one of
|
|
* several possible states. If the FW in operational, waiting-for-handshake
|
|
* states, driver must take steps to bring it to ready state. Otherwise, it
|
|
* has to wait for the ready state.
|
|
*/
|
|
int
|
|
megasas_transition_to_ready(struct megasas_instance *instance, int ocr)
|
|
{
|
|
int i;
|
|
u8 max_wait;
|
|
u32 fw_state;
|
|
u32 cur_state;
|
|
u32 abs_state, curr_abs_state;
|
|
|
|
abs_state = instance->instancet->read_fw_status_reg(instance->reg_set);
|
|
fw_state = abs_state & MFI_STATE_MASK;
|
|
|
|
if (fw_state != MFI_STATE_READY)
|
|
dev_info(&instance->pdev->dev, "Waiting for FW to come to ready"
|
|
" state\n");
|
|
|
|
while (fw_state != MFI_STATE_READY) {
|
|
|
|
switch (fw_state) {
|
|
|
|
case MFI_STATE_FAULT:
|
|
dev_printk(KERN_DEBUG, &instance->pdev->dev, "FW in FAULT state!!\n");
|
|
if (ocr) {
|
|
max_wait = MEGASAS_RESET_WAIT_TIME;
|
|
cur_state = MFI_STATE_FAULT;
|
|
break;
|
|
} else
|
|
return -ENODEV;
|
|
|
|
case MFI_STATE_WAIT_HANDSHAKE:
|
|
/*
|
|
* Set the CLR bit in inbound doorbell
|
|
*/
|
|
if ((instance->pdev->device ==
|
|
PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
|
|
(instance->pdev->device ==
|
|
PCI_DEVICE_ID_LSI_SAS0071SKINNY) ||
|
|
(instance->adapter_type != MFI_SERIES))
|
|
writel(
|
|
MFI_INIT_CLEAR_HANDSHAKE|MFI_INIT_HOTPLUG,
|
|
&instance->reg_set->doorbell);
|
|
else
|
|
writel(
|
|
MFI_INIT_CLEAR_HANDSHAKE|MFI_INIT_HOTPLUG,
|
|
&instance->reg_set->inbound_doorbell);
|
|
|
|
max_wait = MEGASAS_RESET_WAIT_TIME;
|
|
cur_state = MFI_STATE_WAIT_HANDSHAKE;
|
|
break;
|
|
|
|
case MFI_STATE_BOOT_MESSAGE_PENDING:
|
|
if ((instance->pdev->device ==
|
|
PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
|
|
(instance->pdev->device ==
|
|
PCI_DEVICE_ID_LSI_SAS0071SKINNY) ||
|
|
(instance->adapter_type != MFI_SERIES))
|
|
writel(MFI_INIT_HOTPLUG,
|
|
&instance->reg_set->doorbell);
|
|
else
|
|
writel(MFI_INIT_HOTPLUG,
|
|
&instance->reg_set->inbound_doorbell);
|
|
|
|
max_wait = MEGASAS_RESET_WAIT_TIME;
|
|
cur_state = MFI_STATE_BOOT_MESSAGE_PENDING;
|
|
break;
|
|
|
|
case MFI_STATE_OPERATIONAL:
|
|
/*
|
|
* Bring it to READY state; assuming max wait 10 secs
|
|
*/
|
|
instance->instancet->disable_intr(instance);
|
|
if ((instance->pdev->device ==
|
|
PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
|
|
(instance->pdev->device ==
|
|
PCI_DEVICE_ID_LSI_SAS0071SKINNY) ||
|
|
(instance->adapter_type != MFI_SERIES)) {
|
|
writel(MFI_RESET_FLAGS,
|
|
&instance->reg_set->doorbell);
|
|
|
|
if (instance->adapter_type != MFI_SERIES) {
|
|
for (i = 0; i < (10 * 1000); i += 20) {
|
|
if (readl(
|
|
&instance->
|
|
reg_set->
|
|
doorbell) & 1)
|
|
msleep(20);
|
|
else
|
|
break;
|
|
}
|
|
}
|
|
} else
|
|
writel(MFI_RESET_FLAGS,
|
|
&instance->reg_set->inbound_doorbell);
|
|
|
|
max_wait = MEGASAS_RESET_WAIT_TIME;
|
|
cur_state = MFI_STATE_OPERATIONAL;
|
|
break;
|
|
|
|
case MFI_STATE_UNDEFINED:
|
|
/*
|
|
* This state should not last for more than 2 seconds
|
|
*/
|
|
max_wait = MEGASAS_RESET_WAIT_TIME;
|
|
cur_state = MFI_STATE_UNDEFINED;
|
|
break;
|
|
|
|
case MFI_STATE_BB_INIT:
|
|
max_wait = MEGASAS_RESET_WAIT_TIME;
|
|
cur_state = MFI_STATE_BB_INIT;
|
|
break;
|
|
|
|
case MFI_STATE_FW_INIT:
|
|
max_wait = MEGASAS_RESET_WAIT_TIME;
|
|
cur_state = MFI_STATE_FW_INIT;
|
|
break;
|
|
|
|
case MFI_STATE_FW_INIT_2:
|
|
max_wait = MEGASAS_RESET_WAIT_TIME;
|
|
cur_state = MFI_STATE_FW_INIT_2;
|
|
break;
|
|
|
|
case MFI_STATE_DEVICE_SCAN:
|
|
max_wait = MEGASAS_RESET_WAIT_TIME;
|
|
cur_state = MFI_STATE_DEVICE_SCAN;
|
|
break;
|
|
|
|
case MFI_STATE_FLUSH_CACHE:
|
|
max_wait = MEGASAS_RESET_WAIT_TIME;
|
|
cur_state = MFI_STATE_FLUSH_CACHE;
|
|
break;
|
|
|
|
default:
|
|
dev_printk(KERN_DEBUG, &instance->pdev->dev, "Unknown state 0x%x\n",
|
|
fw_state);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/*
|
|
* The cur_state should not last for more than max_wait secs
|
|
*/
|
|
for (i = 0; i < (max_wait * 1000); i++) {
|
|
curr_abs_state = instance->instancet->
|
|
read_fw_status_reg(instance->reg_set);
|
|
|
|
if (abs_state == curr_abs_state) {
|
|
msleep(1);
|
|
} else
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* Return error if fw_state hasn't changed after max_wait
|
|
*/
|
|
if (curr_abs_state == abs_state) {
|
|
dev_printk(KERN_DEBUG, &instance->pdev->dev, "FW state [%d] hasn't changed "
|
|
"in %d secs\n", fw_state, max_wait);
|
|
return -ENODEV;
|
|
}
|
|
|
|
abs_state = curr_abs_state;
|
|
fw_state = curr_abs_state & MFI_STATE_MASK;
|
|
}
|
|
dev_info(&instance->pdev->dev, "FW now in Ready state\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* megasas_teardown_frame_pool - Destroy the cmd frame DMA pool
|
|
* @instance: Adapter soft state
|
|
*/
|
|
static void megasas_teardown_frame_pool(struct megasas_instance *instance)
|
|
{
|
|
int i;
|
|
u16 max_cmd = instance->max_mfi_cmds;
|
|
struct megasas_cmd *cmd;
|
|
|
|
if (!instance->frame_dma_pool)
|
|
return;
|
|
|
|
/*
|
|
* Return all frames to pool
|
|
*/
|
|
for (i = 0; i < max_cmd; i++) {
|
|
|
|
cmd = instance->cmd_list[i];
|
|
|
|
if (cmd->frame)
|
|
dma_pool_free(instance->frame_dma_pool, cmd->frame,
|
|
cmd->frame_phys_addr);
|
|
|
|
if (cmd->sense)
|
|
dma_pool_free(instance->sense_dma_pool, cmd->sense,
|
|
cmd->sense_phys_addr);
|
|
}
|
|
|
|
/*
|
|
* Now destroy the pool itself
|
|
*/
|
|
dma_pool_destroy(instance->frame_dma_pool);
|
|
dma_pool_destroy(instance->sense_dma_pool);
|
|
|
|
instance->frame_dma_pool = NULL;
|
|
instance->sense_dma_pool = NULL;
|
|
}
|
|
|
|
/**
|
|
* megasas_create_frame_pool - Creates DMA pool for cmd frames
|
|
* @instance: Adapter soft state
|
|
*
|
|
* Each command packet has an embedded DMA memory buffer that is used for
|
|
* filling MFI frame and the SG list that immediately follows the frame. This
|
|
* function creates those DMA memory buffers for each command packet by using
|
|
* PCI pool facility.
|
|
*/
|
|
static int megasas_create_frame_pool(struct megasas_instance *instance)
|
|
{
|
|
int i;
|
|
u16 max_cmd;
|
|
u32 sge_sz;
|
|
u32 frame_count;
|
|
struct megasas_cmd *cmd;
|
|
|
|
max_cmd = instance->max_mfi_cmds;
|
|
|
|
/*
|
|
* Size of our frame is 64 bytes for MFI frame, followed by max SG
|
|
* elements and finally SCSI_SENSE_BUFFERSIZE bytes for sense buffer
|
|
*/
|
|
sge_sz = (IS_DMA64) ? sizeof(struct megasas_sge64) :
|
|
sizeof(struct megasas_sge32);
|
|
|
|
if (instance->flag_ieee)
|
|
sge_sz = sizeof(struct megasas_sge_skinny);
|
|
|
|
/*
|
|
* For MFI controllers.
|
|
* max_num_sge = 60
|
|
* max_sge_sz = 16 byte (sizeof megasas_sge_skinny)
|
|
* Total 960 byte (15 MFI frame of 64 byte)
|
|
*
|
|
* Fusion adapter require only 3 extra frame.
|
|
* max_num_sge = 16 (defined as MAX_IOCTL_SGE)
|
|
* max_sge_sz = 12 byte (sizeof megasas_sge64)
|
|
* Total 192 byte (3 MFI frame of 64 byte)
|
|
*/
|
|
frame_count = (instance->adapter_type == MFI_SERIES) ?
|
|
(15 + 1) : (3 + 1);
|
|
instance->mfi_frame_size = MEGAMFI_FRAME_SIZE * frame_count;
|
|
/*
|
|
* Use DMA pool facility provided by PCI layer
|
|
*/
|
|
instance->frame_dma_pool = dma_pool_create("megasas frame pool",
|
|
&instance->pdev->dev,
|
|
instance->mfi_frame_size, 256, 0);
|
|
|
|
if (!instance->frame_dma_pool) {
|
|
dev_printk(KERN_DEBUG, &instance->pdev->dev, "failed to setup frame pool\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
instance->sense_dma_pool = dma_pool_create("megasas sense pool",
|
|
&instance->pdev->dev, 128,
|
|
4, 0);
|
|
|
|
if (!instance->sense_dma_pool) {
|
|
dev_printk(KERN_DEBUG, &instance->pdev->dev, "failed to setup sense pool\n");
|
|
|
|
dma_pool_destroy(instance->frame_dma_pool);
|
|
instance->frame_dma_pool = NULL;
|
|
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/*
|
|
* Allocate and attach a frame to each of the commands in cmd_list.
|
|
* By making cmd->index as the context instead of the &cmd, we can
|
|
* always use 32bit context regardless of the architecture
|
|
*/
|
|
for (i = 0; i < max_cmd; i++) {
|
|
|
|
cmd = instance->cmd_list[i];
|
|
|
|
cmd->frame = dma_pool_alloc(instance->frame_dma_pool,
|
|
GFP_KERNEL, &cmd->frame_phys_addr);
|
|
|
|
cmd->sense = dma_pool_alloc(instance->sense_dma_pool,
|
|
GFP_KERNEL, &cmd->sense_phys_addr);
|
|
|
|
/*
|
|
* megasas_teardown_frame_pool() takes care of freeing
|
|
* whatever has been allocated
|
|
*/
|
|
if (!cmd->frame || !cmd->sense) {
|
|
dev_printk(KERN_DEBUG, &instance->pdev->dev, "dma_pool_alloc failed\n");
|
|
megasas_teardown_frame_pool(instance);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
memset(cmd->frame, 0, instance->mfi_frame_size);
|
|
cmd->frame->io.context = cpu_to_le32(cmd->index);
|
|
cmd->frame->io.pad_0 = 0;
|
|
if ((instance->adapter_type == MFI_SERIES) && reset_devices)
|
|
cmd->frame->hdr.cmd = MFI_CMD_INVALID;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* megasas_free_cmds - Free all the cmds in the free cmd pool
|
|
* @instance: Adapter soft state
|
|
*/
|
|
void megasas_free_cmds(struct megasas_instance *instance)
|
|
{
|
|
int i;
|
|
|
|
/* First free the MFI frame pool */
|
|
megasas_teardown_frame_pool(instance);
|
|
|
|
/* Free all the commands in the cmd_list */
|
|
for (i = 0; i < instance->max_mfi_cmds; i++)
|
|
|
|
kfree(instance->cmd_list[i]);
|
|
|
|
/* Free the cmd_list buffer itself */
|
|
kfree(instance->cmd_list);
|
|
instance->cmd_list = NULL;
|
|
|
|
INIT_LIST_HEAD(&instance->cmd_pool);
|
|
}
|
|
|
|
/**
|
|
* megasas_alloc_cmds - Allocates the command packets
|
|
* @instance: Adapter soft state
|
|
*
|
|
* Each command that is issued to the FW, whether IO commands from the OS or
|
|
* internal commands like IOCTLs, are wrapped in local data structure called
|
|
* megasas_cmd. The frame embedded in this megasas_cmd is actually issued to
|
|
* the FW.
|
|
*
|
|
* Each frame has a 32-bit field called context (tag). This context is used
|
|
* to get back the megasas_cmd from the frame when a frame gets completed in
|
|
* the ISR. Typically the address of the megasas_cmd itself would be used as
|
|
* the context. But we wanted to keep the differences between 32 and 64 bit
|
|
* systems to the mininum. We always use 32 bit integers for the context. In
|
|
* this driver, the 32 bit values are the indices into an array cmd_list.
|
|
* This array is used only to look up the megasas_cmd given the context. The
|
|
* free commands themselves are maintained in a linked list called cmd_pool.
|
|
*/
|
|
int megasas_alloc_cmds(struct megasas_instance *instance)
|
|
{
|
|
int i;
|
|
int j;
|
|
u16 max_cmd;
|
|
struct megasas_cmd *cmd;
|
|
|
|
max_cmd = instance->max_mfi_cmds;
|
|
|
|
/*
|
|
* instance->cmd_list is an array of struct megasas_cmd pointers.
|
|
* Allocate the dynamic array first and then allocate individual
|
|
* commands.
|
|
*/
|
|
instance->cmd_list = kcalloc(max_cmd, sizeof(struct megasas_cmd*), GFP_KERNEL);
|
|
|
|
if (!instance->cmd_list) {
|
|
dev_printk(KERN_DEBUG, &instance->pdev->dev, "out of memory\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
memset(instance->cmd_list, 0, sizeof(struct megasas_cmd *) *max_cmd);
|
|
|
|
for (i = 0; i < max_cmd; i++) {
|
|
instance->cmd_list[i] = kmalloc(sizeof(struct megasas_cmd),
|
|
GFP_KERNEL);
|
|
|
|
if (!instance->cmd_list[i]) {
|
|
|
|
for (j = 0; j < i; j++)
|
|
kfree(instance->cmd_list[j]);
|
|
|
|
kfree(instance->cmd_list);
|
|
instance->cmd_list = NULL;
|
|
|
|
return -ENOMEM;
|
|
}
|
|
}
|
|
|
|
for (i = 0; i < max_cmd; i++) {
|
|
cmd = instance->cmd_list[i];
|
|
memset(cmd, 0, sizeof(struct megasas_cmd));
|
|
cmd->index = i;
|
|
cmd->scmd = NULL;
|
|
cmd->instance = instance;
|
|
|
|
list_add_tail(&cmd->list, &instance->cmd_pool);
|
|
}
|
|
|
|
/*
|
|
* Create a frame pool and assign one frame to each cmd
|
|
*/
|
|
if (megasas_create_frame_pool(instance)) {
|
|
dev_printk(KERN_DEBUG, &instance->pdev->dev, "Error creating frame DMA pool\n");
|
|
megasas_free_cmds(instance);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* dcmd_timeout_ocr_possible - Check if OCR is possible based on Driver/FW state.
|
|
* @instance: Adapter soft state
|
|
*
|
|
* Return 0 for only Fusion adapter, if driver load/unload is not in progress
|
|
* or FW is not under OCR.
|
|
*/
|
|
inline int
|
|
dcmd_timeout_ocr_possible(struct megasas_instance *instance) {
|
|
|
|
if (instance->adapter_type == MFI_SERIES)
|
|
return KILL_ADAPTER;
|
|
else if (instance->unload ||
|
|
test_bit(MEGASAS_FUSION_IN_RESET, &instance->reset_flags))
|
|
return IGNORE_TIMEOUT;
|
|
else
|
|
return INITIATE_OCR;
|
|
}
|
|
|
|
static void
|
|
megasas_get_pd_info(struct megasas_instance *instance, struct scsi_device *sdev)
|
|
{
|
|
int ret;
|
|
struct megasas_cmd *cmd;
|
|
struct megasas_dcmd_frame *dcmd;
|
|
|
|
struct MR_PRIV_DEVICE *mr_device_priv_data;
|
|
u16 device_id = 0;
|
|
|
|
device_id = (sdev->channel * MEGASAS_MAX_DEV_PER_CHANNEL) + sdev->id;
|
|
cmd = megasas_get_cmd(instance);
|
|
|
|
if (!cmd) {
|
|
dev_err(&instance->pdev->dev, "Failed to get cmd %s\n", __func__);
|
|
return;
|
|
}
|
|
|
|
dcmd = &cmd->frame->dcmd;
|
|
|
|
memset(instance->pd_info, 0, sizeof(*instance->pd_info));
|
|
memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
|
|
|
|
dcmd->mbox.s[0] = cpu_to_le16(device_id);
|
|
dcmd->cmd = MFI_CMD_DCMD;
|
|
dcmd->cmd_status = 0xFF;
|
|
dcmd->sge_count = 1;
|
|
dcmd->flags = MFI_FRAME_DIR_READ;
|
|
dcmd->timeout = 0;
|
|
dcmd->pad_0 = 0;
|
|
dcmd->data_xfer_len = cpu_to_le32(sizeof(struct MR_PD_INFO));
|
|
dcmd->opcode = cpu_to_le32(MR_DCMD_PD_GET_INFO);
|
|
|
|
megasas_set_dma_settings(instance, dcmd, instance->pd_info_h,
|
|
sizeof(struct MR_PD_INFO));
|
|
|
|
if ((instance->adapter_type != MFI_SERIES) &&
|
|
!instance->mask_interrupts)
|
|
ret = megasas_issue_blocked_cmd(instance, cmd, MFI_IO_TIMEOUT_SECS);
|
|
else
|
|
ret = megasas_issue_polled(instance, cmd);
|
|
|
|
switch (ret) {
|
|
case DCMD_SUCCESS:
|
|
mr_device_priv_data = sdev->hostdata;
|
|
le16_to_cpus((u16 *)&instance->pd_info->state.ddf.pdType);
|
|
mr_device_priv_data->interface_type =
|
|
instance->pd_info->state.ddf.pdType.intf;
|
|
break;
|
|
|
|
case DCMD_TIMEOUT:
|
|
|
|
switch (dcmd_timeout_ocr_possible(instance)) {
|
|
case INITIATE_OCR:
|
|
cmd->flags |= DRV_DCMD_SKIP_REFIRE;
|
|
megasas_reset_fusion(instance->host,
|
|
MFI_IO_TIMEOUT_OCR);
|
|
break;
|
|
case KILL_ADAPTER:
|
|
megaraid_sas_kill_hba(instance);
|
|
break;
|
|
case IGNORE_TIMEOUT:
|
|
dev_info(&instance->pdev->dev, "Ignore DCMD timeout: %s %d\n",
|
|
__func__, __LINE__);
|
|
break;
|
|
}
|
|
|
|
break;
|
|
}
|
|
|
|
if (ret != DCMD_TIMEOUT)
|
|
megasas_return_cmd(instance, cmd);
|
|
|
|
return;
|
|
}
|
|
/*
|
|
* megasas_get_pd_list_info - Returns FW's pd_list structure
|
|
* @instance: Adapter soft state
|
|
* @pd_list: pd_list structure
|
|
*
|
|
* Issues an internal command (DCMD) to get the FW's controller PD
|
|
* list structure. This information is mainly used to find out SYSTEM
|
|
* supported by the FW.
|
|
*/
|
|
static int
|
|
megasas_get_pd_list(struct megasas_instance *instance)
|
|
{
|
|
int ret = 0, pd_index = 0;
|
|
struct megasas_cmd *cmd;
|
|
struct megasas_dcmd_frame *dcmd;
|
|
struct MR_PD_LIST *ci;
|
|
struct MR_PD_ADDRESS *pd_addr;
|
|
dma_addr_t ci_h = 0;
|
|
|
|
if (instance->pd_list_not_supported) {
|
|
dev_info(&instance->pdev->dev, "MR_DCMD_PD_LIST_QUERY "
|
|
"not supported by firmware\n");
|
|
return ret;
|
|
}
|
|
|
|
ci = instance->pd_list_buf;
|
|
ci_h = instance->pd_list_buf_h;
|
|
|
|
cmd = megasas_get_cmd(instance);
|
|
|
|
if (!cmd) {
|
|
dev_printk(KERN_DEBUG, &instance->pdev->dev, "(get_pd_list): Failed to get cmd\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
dcmd = &cmd->frame->dcmd;
|
|
|
|
memset(ci, 0, sizeof(*ci));
|
|
memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
|
|
|
|
dcmd->mbox.b[0] = MR_PD_QUERY_TYPE_EXPOSED_TO_HOST;
|
|
dcmd->mbox.b[1] = 0;
|
|
dcmd->cmd = MFI_CMD_DCMD;
|
|
dcmd->cmd_status = MFI_STAT_INVALID_STATUS;
|
|
dcmd->sge_count = 1;
|
|
dcmd->flags = MFI_FRAME_DIR_READ;
|
|
dcmd->timeout = 0;
|
|
dcmd->pad_0 = 0;
|
|
dcmd->data_xfer_len = cpu_to_le32(MEGASAS_MAX_PD * sizeof(struct MR_PD_LIST));
|
|
dcmd->opcode = cpu_to_le32(MR_DCMD_PD_LIST_QUERY);
|
|
|
|
megasas_set_dma_settings(instance, dcmd, instance->pd_list_buf_h,
|
|
(MEGASAS_MAX_PD * sizeof(struct MR_PD_LIST)));
|
|
|
|
if ((instance->adapter_type != MFI_SERIES) &&
|
|
!instance->mask_interrupts)
|
|
ret = megasas_issue_blocked_cmd(instance, cmd,
|
|
MFI_IO_TIMEOUT_SECS);
|
|
else
|
|
ret = megasas_issue_polled(instance, cmd);
|
|
|
|
switch (ret) {
|
|
case DCMD_FAILED:
|
|
dev_info(&instance->pdev->dev, "MR_DCMD_PD_LIST_QUERY "
|
|
"failed/not supported by firmware\n");
|
|
|
|
if (instance->adapter_type != MFI_SERIES)
|
|
megaraid_sas_kill_hba(instance);
|
|
else
|
|
instance->pd_list_not_supported = 1;
|
|
break;
|
|
case DCMD_TIMEOUT:
|
|
|
|
switch (dcmd_timeout_ocr_possible(instance)) {
|
|
case INITIATE_OCR:
|
|
cmd->flags |= DRV_DCMD_SKIP_REFIRE;
|
|
/*
|
|
* DCMD failed from AEN path.
|
|
* AEN path already hold reset_mutex to avoid PCI access
|
|
* while OCR is in progress.
|
|
*/
|
|
mutex_unlock(&instance->reset_mutex);
|
|
megasas_reset_fusion(instance->host,
|
|
MFI_IO_TIMEOUT_OCR);
|
|
mutex_lock(&instance->reset_mutex);
|
|
break;
|
|
case KILL_ADAPTER:
|
|
megaraid_sas_kill_hba(instance);
|
|
break;
|
|
case IGNORE_TIMEOUT:
|
|
dev_info(&instance->pdev->dev, "Ignore DCMD timeout: %s %d \n",
|
|
__func__, __LINE__);
|
|
break;
|
|
}
|
|
|
|
break;
|
|
|
|
case DCMD_SUCCESS:
|
|
pd_addr = ci->addr;
|
|
|
|
if ((le32_to_cpu(ci->count) >
|
|
(MEGASAS_MAX_PD_CHANNELS * MEGASAS_MAX_DEV_PER_CHANNEL)))
|
|
break;
|
|
|
|
memset(instance->local_pd_list, 0,
|
|
MEGASAS_MAX_PD * sizeof(struct megasas_pd_list));
|
|
|
|
for (pd_index = 0; pd_index < le32_to_cpu(ci->count); pd_index++) {
|
|
instance->local_pd_list[le16_to_cpu(pd_addr->deviceId)].tid =
|
|
le16_to_cpu(pd_addr->deviceId);
|
|
instance->local_pd_list[le16_to_cpu(pd_addr->deviceId)].driveType =
|
|
pd_addr->scsiDevType;
|
|
instance->local_pd_list[le16_to_cpu(pd_addr->deviceId)].driveState =
|
|
MR_PD_STATE_SYSTEM;
|
|
pd_addr++;
|
|
}
|
|
|
|
memcpy(instance->pd_list, instance->local_pd_list,
|
|
sizeof(instance->pd_list));
|
|
break;
|
|
|
|
}
|
|
|
|
if (ret != DCMD_TIMEOUT)
|
|
megasas_return_cmd(instance, cmd);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* megasas_get_ld_list_info - Returns FW's ld_list structure
|
|
* @instance: Adapter soft state
|
|
* @ld_list: ld_list structure
|
|
*
|
|
* Issues an internal command (DCMD) to get the FW's controller PD
|
|
* list structure. This information is mainly used to find out SYSTEM
|
|
* supported by the FW.
|
|
*/
|
|
static int
|
|
megasas_get_ld_list(struct megasas_instance *instance)
|
|
{
|
|
int ret = 0, ld_index = 0, ids = 0;
|
|
struct megasas_cmd *cmd;
|
|
struct megasas_dcmd_frame *dcmd;
|
|
struct MR_LD_LIST *ci;
|
|
dma_addr_t ci_h = 0;
|
|
u32 ld_count;
|
|
|
|
ci = instance->ld_list_buf;
|
|
ci_h = instance->ld_list_buf_h;
|
|
|
|
cmd = megasas_get_cmd(instance);
|
|
|
|
if (!cmd) {
|
|
dev_printk(KERN_DEBUG, &instance->pdev->dev, "megasas_get_ld_list: Failed to get cmd\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
dcmd = &cmd->frame->dcmd;
|
|
|
|
memset(ci, 0, sizeof(*ci));
|
|
memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
|
|
|
|
if (instance->supportmax256vd)
|
|
dcmd->mbox.b[0] = 1;
|
|
dcmd->cmd = MFI_CMD_DCMD;
|
|
dcmd->cmd_status = MFI_STAT_INVALID_STATUS;
|
|
dcmd->sge_count = 1;
|
|
dcmd->flags = MFI_FRAME_DIR_READ;
|
|
dcmd->timeout = 0;
|
|
dcmd->data_xfer_len = cpu_to_le32(sizeof(struct MR_LD_LIST));
|
|
dcmd->opcode = cpu_to_le32(MR_DCMD_LD_GET_LIST);
|
|
dcmd->pad_0 = 0;
|
|
|
|
megasas_set_dma_settings(instance, dcmd, ci_h,
|
|
sizeof(struct MR_LD_LIST));
|
|
|
|
if ((instance->adapter_type != MFI_SERIES) &&
|
|
!instance->mask_interrupts)
|
|
ret = megasas_issue_blocked_cmd(instance, cmd,
|
|
MFI_IO_TIMEOUT_SECS);
|
|
else
|
|
ret = megasas_issue_polled(instance, cmd);
|
|
|
|
ld_count = le32_to_cpu(ci->ldCount);
|
|
|
|
switch (ret) {
|
|
case DCMD_FAILED:
|
|
megaraid_sas_kill_hba(instance);
|
|
break;
|
|
case DCMD_TIMEOUT:
|
|
|
|
switch (dcmd_timeout_ocr_possible(instance)) {
|
|
case INITIATE_OCR:
|
|
cmd->flags |= DRV_DCMD_SKIP_REFIRE;
|
|
/*
|
|
* DCMD failed from AEN path.
|
|
* AEN path already hold reset_mutex to avoid PCI access
|
|
* while OCR is in progress.
|
|
*/
|
|
mutex_unlock(&instance->reset_mutex);
|
|
megasas_reset_fusion(instance->host,
|
|
MFI_IO_TIMEOUT_OCR);
|
|
mutex_lock(&instance->reset_mutex);
|
|
break;
|
|
case KILL_ADAPTER:
|
|
megaraid_sas_kill_hba(instance);
|
|
break;
|
|
case IGNORE_TIMEOUT:
|
|
dev_info(&instance->pdev->dev, "Ignore DCMD timeout: %s %d\n",
|
|
__func__, __LINE__);
|
|
break;
|
|
}
|
|
|
|
break;
|
|
|
|
case DCMD_SUCCESS:
|
|
if (ld_count > instance->fw_supported_vd_count)
|
|
break;
|
|
|
|
memset(instance->ld_ids, 0xff, MAX_LOGICAL_DRIVES_EXT);
|
|
|
|
for (ld_index = 0; ld_index < ld_count; ld_index++) {
|
|
if (ci->ldList[ld_index].state != 0) {
|
|
ids = ci->ldList[ld_index].ref.targetId;
|
|
instance->ld_ids[ids] = ci->ldList[ld_index].ref.targetId;
|
|
}
|
|
}
|
|
|
|
break;
|
|
}
|
|
|
|
if (ret != DCMD_TIMEOUT)
|
|
megasas_return_cmd(instance, cmd);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* megasas_ld_list_query - Returns FW's ld_list structure
|
|
* @instance: Adapter soft state
|
|
* @ld_list: ld_list structure
|
|
*
|
|
* Issues an internal command (DCMD) to get the FW's controller PD
|
|
* list structure. This information is mainly used to find out SYSTEM
|
|
* supported by the FW.
|
|
*/
|
|
static int
|
|
megasas_ld_list_query(struct megasas_instance *instance, u8 query_type)
|
|
{
|
|
int ret = 0, ld_index = 0, ids = 0;
|
|
struct megasas_cmd *cmd;
|
|
struct megasas_dcmd_frame *dcmd;
|
|
struct MR_LD_TARGETID_LIST *ci;
|
|
dma_addr_t ci_h = 0;
|
|
u32 tgtid_count;
|
|
|
|
ci = instance->ld_targetid_list_buf;
|
|
ci_h = instance->ld_targetid_list_buf_h;
|
|
|
|
cmd = megasas_get_cmd(instance);
|
|
|
|
if (!cmd) {
|
|
dev_warn(&instance->pdev->dev,
|
|
"megasas_ld_list_query: Failed to get cmd\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
dcmd = &cmd->frame->dcmd;
|
|
|
|
memset(ci, 0, sizeof(*ci));
|
|
memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
|
|
|
|
dcmd->mbox.b[0] = query_type;
|
|
if (instance->supportmax256vd)
|
|
dcmd->mbox.b[2] = 1;
|
|
|
|
dcmd->cmd = MFI_CMD_DCMD;
|
|
dcmd->cmd_status = MFI_STAT_INVALID_STATUS;
|
|
dcmd->sge_count = 1;
|
|
dcmd->flags = MFI_FRAME_DIR_READ;
|
|
dcmd->timeout = 0;
|
|
dcmd->data_xfer_len = cpu_to_le32(sizeof(struct MR_LD_TARGETID_LIST));
|
|
dcmd->opcode = cpu_to_le32(MR_DCMD_LD_LIST_QUERY);
|
|
dcmd->pad_0 = 0;
|
|
|
|
megasas_set_dma_settings(instance, dcmd, ci_h,
|
|
sizeof(struct MR_LD_TARGETID_LIST));
|
|
|
|
if ((instance->adapter_type != MFI_SERIES) &&
|
|
!instance->mask_interrupts)
|
|
ret = megasas_issue_blocked_cmd(instance, cmd, MFI_IO_TIMEOUT_SECS);
|
|
else
|
|
ret = megasas_issue_polled(instance, cmd);
|
|
|
|
switch (ret) {
|
|
case DCMD_FAILED:
|
|
dev_info(&instance->pdev->dev,
|
|
"DCMD not supported by firmware - %s %d\n",
|
|
__func__, __LINE__);
|
|
ret = megasas_get_ld_list(instance);
|
|
break;
|
|
case DCMD_TIMEOUT:
|
|
switch (dcmd_timeout_ocr_possible(instance)) {
|
|
case INITIATE_OCR:
|
|
cmd->flags |= DRV_DCMD_SKIP_REFIRE;
|
|
/*
|
|
* DCMD failed from AEN path.
|
|
* AEN path already hold reset_mutex to avoid PCI access
|
|
* while OCR is in progress.
|
|
*/
|
|
mutex_unlock(&instance->reset_mutex);
|
|
megasas_reset_fusion(instance->host,
|
|
MFI_IO_TIMEOUT_OCR);
|
|
mutex_lock(&instance->reset_mutex);
|
|
break;
|
|
case KILL_ADAPTER:
|
|
megaraid_sas_kill_hba(instance);
|
|
break;
|
|
case IGNORE_TIMEOUT:
|
|
dev_info(&instance->pdev->dev, "Ignore DCMD timeout: %s %d\n",
|
|
__func__, __LINE__);
|
|
break;
|
|
}
|
|
|
|
break;
|
|
case DCMD_SUCCESS:
|
|
tgtid_count = le32_to_cpu(ci->count);
|
|
|
|
if ((tgtid_count > (instance->fw_supported_vd_count)))
|
|
break;
|
|
|
|
memset(instance->ld_ids, 0xff, MEGASAS_MAX_LD_IDS);
|
|
for (ld_index = 0; ld_index < tgtid_count; ld_index++) {
|
|
ids = ci->targetId[ld_index];
|
|
instance->ld_ids[ids] = ci->targetId[ld_index];
|
|
}
|
|
|
|
break;
|
|
}
|
|
|
|
if (ret != DCMD_TIMEOUT)
|
|
megasas_return_cmd(instance, cmd);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* megasas_update_ext_vd_details : Update details w.r.t Extended VD
|
|
* instance : Controller's instance
|
|
*/
|
|
static void megasas_update_ext_vd_details(struct megasas_instance *instance)
|
|
{
|
|
struct fusion_context *fusion;
|
|
u32 ventura_map_sz = 0;
|
|
|
|
fusion = instance->ctrl_context;
|
|
/* For MFI based controllers return dummy success */
|
|
if (!fusion)
|
|
return;
|
|
|
|
instance->supportmax256vd =
|
|
instance->ctrl_info_buf->adapterOperations3.supportMaxExtLDs;
|
|
/* Below is additional check to address future FW enhancement */
|
|
if (instance->ctrl_info_buf->max_lds > 64)
|
|
instance->supportmax256vd = 1;
|
|
|
|
instance->drv_supported_vd_count = MEGASAS_MAX_LD_CHANNELS
|
|
* MEGASAS_MAX_DEV_PER_CHANNEL;
|
|
instance->drv_supported_pd_count = MEGASAS_MAX_PD_CHANNELS
|
|
* MEGASAS_MAX_DEV_PER_CHANNEL;
|
|
if (instance->supportmax256vd) {
|
|
instance->fw_supported_vd_count = MAX_LOGICAL_DRIVES_EXT;
|
|
instance->fw_supported_pd_count = MAX_PHYSICAL_DEVICES;
|
|
} else {
|
|
instance->fw_supported_vd_count = MAX_LOGICAL_DRIVES;
|
|
instance->fw_supported_pd_count = MAX_PHYSICAL_DEVICES;
|
|
}
|
|
|
|
dev_info(&instance->pdev->dev,
|
|
"firmware type\t: %s\n",
|
|
instance->supportmax256vd ? "Extended VD(240 VD)firmware" :
|
|
"Legacy(64 VD) firmware");
|
|
|
|
if (instance->max_raid_mapsize) {
|
|
ventura_map_sz = instance->max_raid_mapsize *
|
|
MR_MIN_MAP_SIZE; /* 64k */
|
|
fusion->current_map_sz = ventura_map_sz;
|
|
fusion->max_map_sz = ventura_map_sz;
|
|
} else {
|
|
fusion->old_map_sz = sizeof(struct MR_FW_RAID_MAP) +
|
|
(sizeof(struct MR_LD_SPAN_MAP) *
|
|
(instance->fw_supported_vd_count - 1));
|
|
fusion->new_map_sz = sizeof(struct MR_FW_RAID_MAP_EXT);
|
|
|
|
fusion->max_map_sz =
|
|
max(fusion->old_map_sz, fusion->new_map_sz);
|
|
|
|
if (instance->supportmax256vd)
|
|
fusion->current_map_sz = fusion->new_map_sz;
|
|
else
|
|
fusion->current_map_sz = fusion->old_map_sz;
|
|
}
|
|
/* irrespective of FW raid maps, driver raid map is constant */
|
|
fusion->drv_map_sz = sizeof(struct MR_DRV_RAID_MAP_ALL);
|
|
}
|
|
|
|
/**
|
|
* megasas_get_controller_info - Returns FW's controller structure
|
|
* @instance: Adapter soft state
|
|
*
|
|
* Issues an internal command (DCMD) to get the FW's controller structure.
|
|
* This information is mainly used to find out the maximum IO transfer per
|
|
* command supported by the FW.
|
|
*/
|
|
int
|
|
megasas_get_ctrl_info(struct megasas_instance *instance)
|
|
{
|
|
int ret = 0;
|
|
struct megasas_cmd *cmd;
|
|
struct megasas_dcmd_frame *dcmd;
|
|
struct megasas_ctrl_info *ci;
|
|
dma_addr_t ci_h = 0;
|
|
|
|
ci = instance->ctrl_info_buf;
|
|
ci_h = instance->ctrl_info_buf_h;
|
|
|
|
cmd = megasas_get_cmd(instance);
|
|
|
|
if (!cmd) {
|
|
dev_printk(KERN_DEBUG, &instance->pdev->dev, "Failed to get a free cmd\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
dcmd = &cmd->frame->dcmd;
|
|
|
|
memset(ci, 0, sizeof(*ci));
|
|
memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
|
|
|
|
dcmd->cmd = MFI_CMD_DCMD;
|
|
dcmd->cmd_status = MFI_STAT_INVALID_STATUS;
|
|
dcmd->sge_count = 1;
|
|
dcmd->flags = MFI_FRAME_DIR_READ;
|
|
dcmd->timeout = 0;
|
|
dcmd->pad_0 = 0;
|
|
dcmd->data_xfer_len = cpu_to_le32(sizeof(struct megasas_ctrl_info));
|
|
dcmd->opcode = cpu_to_le32(MR_DCMD_CTRL_GET_INFO);
|
|
dcmd->mbox.b[0] = 1;
|
|
|
|
megasas_set_dma_settings(instance, dcmd, ci_h,
|
|
sizeof(struct megasas_ctrl_info));
|
|
|
|
if ((instance->adapter_type != MFI_SERIES) &&
|
|
!instance->mask_interrupts)
|
|
ret = megasas_issue_blocked_cmd(instance, cmd, MFI_IO_TIMEOUT_SECS);
|
|
else
|
|
ret = megasas_issue_polled(instance, cmd);
|
|
|
|
switch (ret) {
|
|
case DCMD_SUCCESS:
|
|
/* Save required controller information in
|
|
* CPU endianness format.
|
|
*/
|
|
le32_to_cpus((u32 *)&ci->properties.OnOffProperties);
|
|
le32_to_cpus((u32 *)&ci->adapterOperations2);
|
|
le32_to_cpus((u32 *)&ci->adapterOperations3);
|
|
le16_to_cpus((u16 *)&ci->adapter_operations4);
|
|
|
|
/* Update the latest Ext VD info.
|
|
* From Init path, store current firmware details.
|
|
* From OCR path, detect any firmware properties changes.
|
|
* in case of Firmware upgrade without system reboot.
|
|
*/
|
|
megasas_update_ext_vd_details(instance);
|
|
instance->use_seqnum_jbod_fp =
|
|
ci->adapterOperations3.useSeqNumJbodFP;
|
|
instance->support_morethan256jbod =
|
|
ci->adapter_operations4.support_pd_map_target_id;
|
|
|
|
/*Check whether controller is iMR or MR */
|
|
instance->is_imr = (ci->memory_size ? 0 : 1);
|
|
dev_info(&instance->pdev->dev,
|
|
"controller type\t: %s(%dMB)\n",
|
|
instance->is_imr ? "iMR" : "MR",
|
|
le16_to_cpu(ci->memory_size));
|
|
|
|
instance->disableOnlineCtrlReset =
|
|
ci->properties.OnOffProperties.disableOnlineCtrlReset;
|
|
instance->secure_jbod_support =
|
|
ci->adapterOperations3.supportSecurityonJBOD;
|
|
dev_info(&instance->pdev->dev, "Online Controller Reset(OCR)\t: %s\n",
|
|
instance->disableOnlineCtrlReset ? "Disabled" : "Enabled");
|
|
dev_info(&instance->pdev->dev, "Secure JBOD support\t: %s\n",
|
|
instance->secure_jbod_support ? "Yes" : "No");
|
|
break;
|
|
|
|
case DCMD_TIMEOUT:
|
|
switch (dcmd_timeout_ocr_possible(instance)) {
|
|
case INITIATE_OCR:
|
|
cmd->flags |= DRV_DCMD_SKIP_REFIRE;
|
|
megasas_reset_fusion(instance->host,
|
|
MFI_IO_TIMEOUT_OCR);
|
|
break;
|
|
case KILL_ADAPTER:
|
|
megaraid_sas_kill_hba(instance);
|
|
break;
|
|
case IGNORE_TIMEOUT:
|
|
dev_info(&instance->pdev->dev, "Ignore DCMD timeout: %s %d\n",
|
|
__func__, __LINE__);
|
|
break;
|
|
}
|
|
case DCMD_FAILED:
|
|
megaraid_sas_kill_hba(instance);
|
|
break;
|
|
|
|
}
|
|
|
|
megasas_return_cmd(instance, cmd);
|
|
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* megasas_set_crash_dump_params - Sends address of crash dump DMA buffer
|
|
* to firmware
|
|
*
|
|
* @instance: Adapter soft state
|
|
* @crash_buf_state - tell FW to turn ON/OFF crash dump feature
|
|
MR_CRASH_BUF_TURN_OFF = 0
|
|
MR_CRASH_BUF_TURN_ON = 1
|
|
* @return 0 on success non-zero on failure.
|
|
* Issues an internal command (DCMD) to set parameters for crash dump feature.
|
|
* Driver will send address of crash dump DMA buffer and set mbox to tell FW
|
|
* that driver supports crash dump feature. This DCMD will be sent only if
|
|
* crash dump feature is supported by the FW.
|
|
*
|
|
*/
|
|
int megasas_set_crash_dump_params(struct megasas_instance *instance,
|
|
u8 crash_buf_state)
|
|
{
|
|
int ret = 0;
|
|
struct megasas_cmd *cmd;
|
|
struct megasas_dcmd_frame *dcmd;
|
|
|
|
cmd = megasas_get_cmd(instance);
|
|
|
|
if (!cmd) {
|
|
dev_err(&instance->pdev->dev, "Failed to get a free cmd\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
|
|
dcmd = &cmd->frame->dcmd;
|
|
|
|
memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
|
|
dcmd->mbox.b[0] = crash_buf_state;
|
|
dcmd->cmd = MFI_CMD_DCMD;
|
|
dcmd->cmd_status = MFI_STAT_INVALID_STATUS;
|
|
dcmd->sge_count = 1;
|
|
dcmd->flags = MFI_FRAME_DIR_NONE;
|
|
dcmd->timeout = 0;
|
|
dcmd->pad_0 = 0;
|
|
dcmd->data_xfer_len = cpu_to_le32(CRASH_DMA_BUF_SIZE);
|
|
dcmd->opcode = cpu_to_le32(MR_DCMD_CTRL_SET_CRASH_DUMP_PARAMS);
|
|
|
|
megasas_set_dma_settings(instance, dcmd, instance->crash_dump_h,
|
|
CRASH_DMA_BUF_SIZE);
|
|
|
|
if ((instance->adapter_type != MFI_SERIES) &&
|
|
!instance->mask_interrupts)
|
|
ret = megasas_issue_blocked_cmd(instance, cmd, MFI_IO_TIMEOUT_SECS);
|
|
else
|
|
ret = megasas_issue_polled(instance, cmd);
|
|
|
|
if (ret == DCMD_TIMEOUT) {
|
|
switch (dcmd_timeout_ocr_possible(instance)) {
|
|
case INITIATE_OCR:
|
|
cmd->flags |= DRV_DCMD_SKIP_REFIRE;
|
|
megasas_reset_fusion(instance->host,
|
|
MFI_IO_TIMEOUT_OCR);
|
|
break;
|
|
case KILL_ADAPTER:
|
|
megaraid_sas_kill_hba(instance);
|
|
break;
|
|
case IGNORE_TIMEOUT:
|
|
dev_info(&instance->pdev->dev, "Ignore DCMD timeout: %s %d\n",
|
|
__func__, __LINE__);
|
|
break;
|
|
}
|
|
} else
|
|
megasas_return_cmd(instance, cmd);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* megasas_issue_init_mfi - Initializes the FW
|
|
* @instance: Adapter soft state
|
|
*
|
|
* Issues the INIT MFI cmd
|
|
*/
|
|
static int
|
|
megasas_issue_init_mfi(struct megasas_instance *instance)
|
|
{
|
|
__le32 context;
|
|
struct megasas_cmd *cmd;
|
|
struct megasas_init_frame *init_frame;
|
|
struct megasas_init_queue_info *initq_info;
|
|
dma_addr_t init_frame_h;
|
|
dma_addr_t initq_info_h;
|
|
|
|
/*
|
|
* Prepare a init frame. Note the init frame points to queue info
|
|
* structure. Each frame has SGL allocated after first 64 bytes. For
|
|
* this frame - since we don't need any SGL - we use SGL's space as
|
|
* queue info structure
|
|
*
|
|
* We will not get a NULL command below. We just created the pool.
|
|
*/
|
|
cmd = megasas_get_cmd(instance);
|
|
|
|
init_frame = (struct megasas_init_frame *)cmd->frame;
|
|
initq_info = (struct megasas_init_queue_info *)
|
|
((unsigned long)init_frame + 64);
|
|
|
|
init_frame_h = cmd->frame_phys_addr;
|
|
initq_info_h = init_frame_h + 64;
|
|
|
|
context = init_frame->context;
|
|
memset(init_frame, 0, MEGAMFI_FRAME_SIZE);
|
|
memset(initq_info, 0, sizeof(struct megasas_init_queue_info));
|
|
init_frame->context = context;
|
|
|
|
initq_info->reply_queue_entries = cpu_to_le32(instance->max_fw_cmds + 1);
|
|
initq_info->reply_queue_start_phys_addr_lo = cpu_to_le32(instance->reply_queue_h);
|
|
|
|
initq_info->producer_index_phys_addr_lo = cpu_to_le32(instance->producer_h);
|
|
initq_info->consumer_index_phys_addr_lo = cpu_to_le32(instance->consumer_h);
|
|
|
|
init_frame->cmd = MFI_CMD_INIT;
|
|
init_frame->cmd_status = MFI_STAT_INVALID_STATUS;
|
|
init_frame->queue_info_new_phys_addr_lo =
|
|
cpu_to_le32(lower_32_bits(initq_info_h));
|
|
init_frame->queue_info_new_phys_addr_hi =
|
|
cpu_to_le32(upper_32_bits(initq_info_h));
|
|
|
|
init_frame->data_xfer_len = cpu_to_le32(sizeof(struct megasas_init_queue_info));
|
|
|
|
/*
|
|
* disable the intr before firing the init frame to FW
|
|
*/
|
|
instance->instancet->disable_intr(instance);
|
|
|
|
/*
|
|
* Issue the init frame in polled mode
|
|
*/
|
|
|
|
if (megasas_issue_polled(instance, cmd)) {
|
|
dev_err(&instance->pdev->dev, "Failed to init firmware\n");
|
|
megasas_return_cmd(instance, cmd);
|
|
goto fail_fw_init;
|
|
}
|
|
|
|
megasas_return_cmd(instance, cmd);
|
|
|
|
return 0;
|
|
|
|
fail_fw_init:
|
|
return -EINVAL;
|
|
}
|
|
|
|
static u32
|
|
megasas_init_adapter_mfi(struct megasas_instance *instance)
|
|
{
|
|
struct megasas_register_set __iomem *reg_set;
|
|
u32 context_sz;
|
|
u32 reply_q_sz;
|
|
|
|
reg_set = instance->reg_set;
|
|
|
|
/*
|
|
* Get various operational parameters from status register
|
|
*/
|
|
instance->max_fw_cmds = instance->instancet->read_fw_status_reg(reg_set) & 0x00FFFF;
|
|
/*
|
|
* Reduce the max supported cmds by 1. This is to ensure that the
|
|
* reply_q_sz (1 more than the max cmd that driver may send)
|
|
* does not exceed max cmds that the FW can support
|
|
*/
|
|
instance->max_fw_cmds = instance->max_fw_cmds-1;
|
|
instance->max_mfi_cmds = instance->max_fw_cmds;
|
|
instance->max_num_sge = (instance->instancet->read_fw_status_reg(reg_set) & 0xFF0000) >>
|
|
0x10;
|
|
/*
|
|
* For MFI skinny adapters, MEGASAS_SKINNY_INT_CMDS commands
|
|
* are reserved for IOCTL + driver's internal DCMDs.
|
|
*/
|
|
if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
|
|
(instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0071SKINNY)) {
|
|
instance->max_scsi_cmds = (instance->max_fw_cmds -
|
|
MEGASAS_SKINNY_INT_CMDS);
|
|
sema_init(&instance->ioctl_sem, MEGASAS_SKINNY_INT_CMDS);
|
|
} else {
|
|
instance->max_scsi_cmds = (instance->max_fw_cmds -
|
|
MEGASAS_INT_CMDS);
|
|
sema_init(&instance->ioctl_sem, (MEGASAS_MFI_IOCTL_CMDS));
|
|
}
|
|
|
|
instance->cur_can_queue = instance->max_scsi_cmds;
|
|
/*
|
|
* Create a pool of commands
|
|
*/
|
|
if (megasas_alloc_cmds(instance))
|
|
goto fail_alloc_cmds;
|
|
|
|
/*
|
|
* Allocate memory for reply queue. Length of reply queue should
|
|
* be _one_ more than the maximum commands handled by the firmware.
|
|
*
|
|
* Note: When FW completes commands, it places corresponding contex
|
|
* values in this circular reply queue. This circular queue is a fairly
|
|
* typical producer-consumer queue. FW is the producer (of completed
|
|
* commands) and the driver is the consumer.
|
|
*/
|
|
context_sz = sizeof(u32);
|
|
reply_q_sz = context_sz * (instance->max_fw_cmds + 1);
|
|
|
|
instance->reply_queue = pci_alloc_consistent(instance->pdev,
|
|
reply_q_sz,
|
|
&instance->reply_queue_h);
|
|
|
|
if (!instance->reply_queue) {
|
|
dev_printk(KERN_DEBUG, &instance->pdev->dev, "Out of DMA mem for reply queue\n");
|
|
goto fail_reply_queue;
|
|
}
|
|
|
|
if (megasas_issue_init_mfi(instance))
|
|
goto fail_fw_init;
|
|
|
|
if (megasas_get_ctrl_info(instance)) {
|
|
dev_err(&instance->pdev->dev, "(%d): Could get controller info "
|
|
"Fail from %s %d\n", instance->unique_id,
|
|
__func__, __LINE__);
|
|
goto fail_fw_init;
|
|
}
|
|
|
|
instance->fw_support_ieee = 0;
|
|
instance->fw_support_ieee =
|
|
(instance->instancet->read_fw_status_reg(reg_set) &
|
|
0x04000000);
|
|
|
|
dev_notice(&instance->pdev->dev, "megasas_init_mfi: fw_support_ieee=%d",
|
|
instance->fw_support_ieee);
|
|
|
|
if (instance->fw_support_ieee)
|
|
instance->flag_ieee = 1;
|
|
|
|
return 0;
|
|
|
|
fail_fw_init:
|
|
|
|
pci_free_consistent(instance->pdev, reply_q_sz,
|
|
instance->reply_queue, instance->reply_queue_h);
|
|
fail_reply_queue:
|
|
megasas_free_cmds(instance);
|
|
|
|
fail_alloc_cmds:
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* megasas_setup_irqs_ioapic - register legacy interrupts.
|
|
* @instance: Adapter soft state
|
|
*
|
|
* Do not enable interrupt, only setup ISRs.
|
|
*
|
|
* Return 0 on success.
|
|
*/
|
|
static int
|
|
megasas_setup_irqs_ioapic(struct megasas_instance *instance)
|
|
{
|
|
struct pci_dev *pdev;
|
|
|
|
pdev = instance->pdev;
|
|
instance->irq_context[0].instance = instance;
|
|
instance->irq_context[0].MSIxIndex = 0;
|
|
if (request_irq(pci_irq_vector(pdev, 0),
|
|
instance->instancet->service_isr, IRQF_SHARED,
|
|
"megasas", &instance->irq_context[0])) {
|
|
dev_err(&instance->pdev->dev,
|
|
"Failed to register IRQ from %s %d\n",
|
|
__func__, __LINE__);
|
|
return -1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* megasas_setup_irqs_msix - register MSI-x interrupts.
|
|
* @instance: Adapter soft state
|
|
* @is_probe: Driver probe check
|
|
*
|
|
* Do not enable interrupt, only setup ISRs.
|
|
*
|
|
* Return 0 on success.
|
|
*/
|
|
static int
|
|
megasas_setup_irqs_msix(struct megasas_instance *instance, u8 is_probe)
|
|
{
|
|
int i, j;
|
|
struct pci_dev *pdev;
|
|
|
|
pdev = instance->pdev;
|
|
|
|
/* Try MSI-x */
|
|
for (i = 0; i < instance->msix_vectors; i++) {
|
|
instance->irq_context[i].instance = instance;
|
|
instance->irq_context[i].MSIxIndex = i;
|
|
if (request_irq(pci_irq_vector(pdev, i),
|
|
instance->instancet->service_isr, 0, "megasas",
|
|
&instance->irq_context[i])) {
|
|
dev_err(&instance->pdev->dev,
|
|
"Failed to register IRQ for vector %d.\n", i);
|
|
for (j = 0; j < i; j++)
|
|
free_irq(pci_irq_vector(pdev, j),
|
|
&instance->irq_context[j]);
|
|
/* Retry irq register for IO_APIC*/
|
|
instance->msix_vectors = 0;
|
|
if (is_probe) {
|
|
pci_free_irq_vectors(instance->pdev);
|
|
return megasas_setup_irqs_ioapic(instance);
|
|
} else {
|
|
return -1;
|
|
}
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* megasas_destroy_irqs- unregister interrupts.
|
|
* @instance: Adapter soft state
|
|
* return: void
|
|
*/
|
|
static void
|
|
megasas_destroy_irqs(struct megasas_instance *instance) {
|
|
|
|
int i;
|
|
|
|
if (instance->msix_vectors)
|
|
for (i = 0; i < instance->msix_vectors; i++) {
|
|
free_irq(pci_irq_vector(instance->pdev, i),
|
|
&instance->irq_context[i]);
|
|
}
|
|
else
|
|
free_irq(pci_irq_vector(instance->pdev, 0),
|
|
&instance->irq_context[0]);
|
|
}
|
|
|
|
/**
|
|
* megasas_setup_jbod_map - setup jbod map for FP seq_number.
|
|
* @instance: Adapter soft state
|
|
* @is_probe: Driver probe check
|
|
*
|
|
* Return 0 on success.
|
|
*/
|
|
void
|
|
megasas_setup_jbod_map(struct megasas_instance *instance)
|
|
{
|
|
int i;
|
|
struct fusion_context *fusion = instance->ctrl_context;
|
|
u32 pd_seq_map_sz;
|
|
|
|
pd_seq_map_sz = sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) +
|
|
(sizeof(struct MR_PD_CFG_SEQ) * (MAX_PHYSICAL_DEVICES - 1));
|
|
|
|
if (reset_devices || !fusion ||
|
|
!instance->ctrl_info_buf->adapterOperations3.useSeqNumJbodFP) {
|
|
dev_info(&instance->pdev->dev,
|
|
"Jbod map is not supported %s %d\n",
|
|
__func__, __LINE__);
|
|
instance->use_seqnum_jbod_fp = false;
|
|
return;
|
|
}
|
|
|
|
if (fusion->pd_seq_sync[0])
|
|
goto skip_alloc;
|
|
|
|
for (i = 0; i < JBOD_MAPS_COUNT; i++) {
|
|
fusion->pd_seq_sync[i] = dma_alloc_coherent
|
|
(&instance->pdev->dev, pd_seq_map_sz,
|
|
&fusion->pd_seq_phys[i], GFP_KERNEL);
|
|
if (!fusion->pd_seq_sync[i]) {
|
|
dev_err(&instance->pdev->dev,
|
|
"Failed to allocate memory from %s %d\n",
|
|
__func__, __LINE__);
|
|
if (i == 1) {
|
|
dma_free_coherent(&instance->pdev->dev,
|
|
pd_seq_map_sz, fusion->pd_seq_sync[0],
|
|
fusion->pd_seq_phys[0]);
|
|
fusion->pd_seq_sync[0] = NULL;
|
|
}
|
|
instance->use_seqnum_jbod_fp = false;
|
|
return;
|
|
}
|
|
}
|
|
|
|
skip_alloc:
|
|
if (!megasas_sync_pd_seq_num(instance, false) &&
|
|
!megasas_sync_pd_seq_num(instance, true))
|
|
instance->use_seqnum_jbod_fp = true;
|
|
else
|
|
instance->use_seqnum_jbod_fp = false;
|
|
}
|
|
|
|
/**
|
|
* megasas_init_fw - Initializes the FW
|
|
* @instance: Adapter soft state
|
|
*
|
|
* This is the main function for initializing firmware
|
|
*/
|
|
|
|
static int megasas_init_fw(struct megasas_instance *instance)
|
|
{
|
|
u32 max_sectors_1;
|
|
u32 max_sectors_2, tmp_sectors, msix_enable;
|
|
u32 scratch_pad_2, scratch_pad_3, scratch_pad_4;
|
|
resource_size_t base_addr;
|
|
struct megasas_register_set __iomem *reg_set;
|
|
struct megasas_ctrl_info *ctrl_info = NULL;
|
|
unsigned long bar_list;
|
|
int i, j, loop, fw_msix_count = 0;
|
|
struct IOV_111 *iovPtr;
|
|
struct fusion_context *fusion;
|
|
|
|
fusion = instance->ctrl_context;
|
|
|
|
/* Find first memory bar */
|
|
bar_list = pci_select_bars(instance->pdev, IORESOURCE_MEM);
|
|
instance->bar = find_first_bit(&bar_list, BITS_PER_LONG);
|
|
if (pci_request_selected_regions(instance->pdev, 1<<instance->bar,
|
|
"megasas: LSI")) {
|
|
dev_printk(KERN_DEBUG, &instance->pdev->dev, "IO memory region busy!\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
base_addr = pci_resource_start(instance->pdev, instance->bar);
|
|
instance->reg_set = ioremap_nocache(base_addr, 8192);
|
|
|
|
if (!instance->reg_set) {
|
|
dev_printk(KERN_DEBUG, &instance->pdev->dev, "Failed to map IO mem\n");
|
|
goto fail_ioremap;
|
|
}
|
|
|
|
reg_set = instance->reg_set;
|
|
|
|
if (instance->adapter_type != MFI_SERIES)
|
|
instance->instancet = &megasas_instance_template_fusion;
|
|
else {
|
|
switch (instance->pdev->device) {
|
|
case PCI_DEVICE_ID_LSI_SAS1078R:
|
|
case PCI_DEVICE_ID_LSI_SAS1078DE:
|
|
instance->instancet = &megasas_instance_template_ppc;
|
|
break;
|
|
case PCI_DEVICE_ID_LSI_SAS1078GEN2:
|
|
case PCI_DEVICE_ID_LSI_SAS0079GEN2:
|
|
instance->instancet = &megasas_instance_template_gen2;
|
|
break;
|
|
case PCI_DEVICE_ID_LSI_SAS0073SKINNY:
|
|
case PCI_DEVICE_ID_LSI_SAS0071SKINNY:
|
|
instance->instancet = &megasas_instance_template_skinny;
|
|
break;
|
|
case PCI_DEVICE_ID_LSI_SAS1064R:
|
|
case PCI_DEVICE_ID_DELL_PERC5:
|
|
default:
|
|
instance->instancet = &megasas_instance_template_xscale;
|
|
instance->pd_list_not_supported = 1;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (megasas_transition_to_ready(instance, 0)) {
|
|
atomic_set(&instance->fw_reset_no_pci_access, 1);
|
|
instance->instancet->adp_reset
|
|
(instance, instance->reg_set);
|
|
atomic_set(&instance->fw_reset_no_pci_access, 0);
|
|
dev_info(&instance->pdev->dev,
|
|
"FW restarted successfully from %s!\n",
|
|
__func__);
|
|
|
|
/*waitting for about 30 second before retry*/
|
|
ssleep(30);
|
|
|
|
if (megasas_transition_to_ready(instance, 0))
|
|
goto fail_ready_state;
|
|
}
|
|
|
|
megasas_init_ctrl_params(instance);
|
|
|
|
if (megasas_set_dma_mask(instance))
|
|
goto fail_ready_state;
|
|
|
|
if (megasas_alloc_ctrl_mem(instance))
|
|
goto fail_alloc_dma_buf;
|
|
|
|
if (megasas_alloc_ctrl_dma_buffers(instance))
|
|
goto fail_alloc_dma_buf;
|
|
|
|
fusion = instance->ctrl_context;
|
|
|
|
if (instance->adapter_type == VENTURA_SERIES) {
|
|
scratch_pad_3 =
|
|
readl(&instance->reg_set->outbound_scratch_pad_3);
|
|
instance->max_raid_mapsize = ((scratch_pad_3 >>
|
|
MR_MAX_RAID_MAP_SIZE_OFFSET_SHIFT) &
|
|
MR_MAX_RAID_MAP_SIZE_MASK);
|
|
}
|
|
|
|
/* Check if MSI-X is supported while in ready state */
|
|
msix_enable = (instance->instancet->read_fw_status_reg(reg_set) &
|
|
0x4000000) >> 0x1a;
|
|
if (msix_enable && !msix_disable) {
|
|
int irq_flags = PCI_IRQ_MSIX;
|
|
|
|
scratch_pad_2 = readl
|
|
(&instance->reg_set->outbound_scratch_pad_2);
|
|
/* Check max MSI-X vectors */
|
|
if (fusion) {
|
|
if (instance->adapter_type == THUNDERBOLT_SERIES) {
|
|
/* Thunderbolt Series*/
|
|
instance->msix_vectors = (scratch_pad_2
|
|
& MR_MAX_REPLY_QUEUES_OFFSET) + 1;
|
|
fw_msix_count = instance->msix_vectors;
|
|
} else { /* Invader series supports more than 8 MSI-x vectors*/
|
|
instance->msix_vectors = ((scratch_pad_2
|
|
& MR_MAX_REPLY_QUEUES_EXT_OFFSET)
|
|
>> MR_MAX_REPLY_QUEUES_EXT_OFFSET_SHIFT) + 1;
|
|
if (instance->msix_vectors > 16)
|
|
instance->msix_combined = true;
|
|
|
|
if (rdpq_enable)
|
|
instance->is_rdpq = (scratch_pad_2 & MR_RDPQ_MODE_OFFSET) ?
|
|
1 : 0;
|
|
fw_msix_count = instance->msix_vectors;
|
|
/* Save 1-15 reply post index address to local memory
|
|
* Index 0 is already saved from reg offset
|
|
* MPI2_REPLY_POST_HOST_INDEX_OFFSET
|
|
*/
|
|
for (loop = 1; loop < MR_MAX_MSIX_REG_ARRAY; loop++) {
|
|
instance->reply_post_host_index_addr[loop] =
|
|
(u32 __iomem *)
|
|
((u8 __iomem *)instance->reg_set +
|
|
MPI2_SUP_REPLY_POST_HOST_INDEX_OFFSET
|
|
+ (loop * 0x10));
|
|
}
|
|
}
|
|
if (msix_vectors)
|
|
instance->msix_vectors = min(msix_vectors,
|
|
instance->msix_vectors);
|
|
} else /* MFI adapters */
|
|
instance->msix_vectors = 1;
|
|
/* Don't bother allocating more MSI-X vectors than cpus */
|
|
instance->msix_vectors = min(instance->msix_vectors,
|
|
(unsigned int)num_online_cpus());
|
|
if (smp_affinity_enable)
|
|
irq_flags |= PCI_IRQ_AFFINITY;
|
|
i = pci_alloc_irq_vectors(instance->pdev, 1,
|
|
instance->msix_vectors, irq_flags);
|
|
if (i > 0)
|
|
instance->msix_vectors = i;
|
|
else
|
|
instance->msix_vectors = 0;
|
|
}
|
|
/*
|
|
* MSI-X host index 0 is common for all adapter.
|
|
* It is used for all MPT based Adapters.
|
|
*/
|
|
if (instance->msix_combined) {
|
|
instance->reply_post_host_index_addr[0] =
|
|
(u32 *)((u8 *)instance->reg_set +
|
|
MPI2_SUP_REPLY_POST_HOST_INDEX_OFFSET);
|
|
} else {
|
|
instance->reply_post_host_index_addr[0] =
|
|
(u32 *)((u8 *)instance->reg_set +
|
|
MPI2_REPLY_POST_HOST_INDEX_OFFSET);
|
|
}
|
|
|
|
if (!instance->msix_vectors) {
|
|
i = pci_alloc_irq_vectors(instance->pdev, 1, 1, PCI_IRQ_LEGACY);
|
|
if (i < 0)
|
|
goto fail_setup_irqs;
|
|
}
|
|
|
|
dev_info(&instance->pdev->dev,
|
|
"firmware supports msix\t: (%d)", fw_msix_count);
|
|
dev_info(&instance->pdev->dev,
|
|
"current msix/online cpus\t: (%d/%d)\n",
|
|
instance->msix_vectors, (unsigned int)num_online_cpus());
|
|
dev_info(&instance->pdev->dev,
|
|
"RDPQ mode\t: (%s)\n", instance->is_rdpq ? "enabled" : "disabled");
|
|
|
|
tasklet_init(&instance->isr_tasklet, instance->instancet->tasklet,
|
|
(unsigned long)instance);
|
|
|
|
/*
|
|
* Below are default value for legacy Firmware.
|
|
* non-fusion based controllers
|
|
*/
|
|
instance->fw_supported_vd_count = MAX_LOGICAL_DRIVES;
|
|
instance->fw_supported_pd_count = MAX_PHYSICAL_DEVICES;
|
|
/* Get operational params, sge flags, send init cmd to controller */
|
|
if (instance->instancet->init_adapter(instance))
|
|
goto fail_init_adapter;
|
|
|
|
if (instance->adapter_type == VENTURA_SERIES) {
|
|
scratch_pad_4 =
|
|
readl(&instance->reg_set->outbound_scratch_pad_4);
|
|
if ((scratch_pad_4 & MR_NVME_PAGE_SIZE_MASK) >=
|
|
MR_DEFAULT_NVME_PAGE_SHIFT)
|
|
instance->nvme_page_size =
|
|
(1 << (scratch_pad_4 & MR_NVME_PAGE_SIZE_MASK));
|
|
|
|
dev_info(&instance->pdev->dev,
|
|
"NVME page size\t: (%d)\n", instance->nvme_page_size);
|
|
}
|
|
|
|
if (instance->msix_vectors ?
|
|
megasas_setup_irqs_msix(instance, 1) :
|
|
megasas_setup_irqs_ioapic(instance))
|
|
goto fail_init_adapter;
|
|
|
|
instance->instancet->enable_intr(instance);
|
|
|
|
dev_info(&instance->pdev->dev, "INIT adapter done\n");
|
|
|
|
megasas_setup_jbod_map(instance);
|
|
|
|
/** for passthrough
|
|
* the following function will get the PD LIST.
|
|
*/
|
|
memset(instance->pd_list, 0,
|
|
(MEGASAS_MAX_PD * sizeof(struct megasas_pd_list)));
|
|
if (megasas_get_pd_list(instance) < 0) {
|
|
dev_err(&instance->pdev->dev, "failed to get PD list\n");
|
|
goto fail_get_ld_pd_list;
|
|
}
|
|
|
|
memset(instance->ld_ids, 0xff, MEGASAS_MAX_LD_IDS);
|
|
|
|
/* stream detection initialization */
|
|
if (instance->adapter_type == VENTURA_SERIES) {
|
|
fusion->stream_detect_by_ld =
|
|
kzalloc(sizeof(struct LD_STREAM_DETECT *)
|
|
* MAX_LOGICAL_DRIVES_EXT,
|
|
GFP_KERNEL);
|
|
if (!fusion->stream_detect_by_ld) {
|
|
dev_err(&instance->pdev->dev,
|
|
"unable to allocate stream detection for pool of LDs\n");
|
|
goto fail_get_ld_pd_list;
|
|
}
|
|
for (i = 0; i < MAX_LOGICAL_DRIVES_EXT; ++i) {
|
|
fusion->stream_detect_by_ld[i] =
|
|
kzalloc(sizeof(struct LD_STREAM_DETECT),
|
|
GFP_KERNEL);
|
|
if (!fusion->stream_detect_by_ld[i]) {
|
|
dev_err(&instance->pdev->dev,
|
|
"unable to allocate stream detect by LD\n ");
|
|
for (j = 0; j < i; ++j)
|
|
kfree(fusion->stream_detect_by_ld[j]);
|
|
kfree(fusion->stream_detect_by_ld);
|
|
fusion->stream_detect_by_ld = NULL;
|
|
goto fail_get_ld_pd_list;
|
|
}
|
|
fusion->stream_detect_by_ld[i]->mru_bit_map
|
|
= MR_STREAM_BITMAP;
|
|
}
|
|
}
|
|
|
|
if (megasas_ld_list_query(instance,
|
|
MR_LD_QUERY_TYPE_EXPOSED_TO_HOST))
|
|
goto fail_get_ld_pd_list;
|
|
|
|
/*
|
|
* Compute the max allowed sectors per IO: The controller info has two
|
|
* limits on max sectors. Driver should use the minimum of these two.
|
|
*
|
|
* 1 << stripe_sz_ops.min = max sectors per strip
|
|
*
|
|
* Note that older firmwares ( < FW ver 30) didn't report information
|
|
* to calculate max_sectors_1. So the number ended up as zero always.
|
|
*/
|
|
tmp_sectors = 0;
|
|
ctrl_info = instance->ctrl_info_buf;
|
|
|
|
max_sectors_1 = (1 << ctrl_info->stripe_sz_ops.min) *
|
|
le16_to_cpu(ctrl_info->max_strips_per_io);
|
|
max_sectors_2 = le32_to_cpu(ctrl_info->max_request_size);
|
|
|
|
tmp_sectors = min_t(u32, max_sectors_1, max_sectors_2);
|
|
|
|
instance->peerIsPresent = ctrl_info->cluster.peerIsPresent;
|
|
instance->passive = ctrl_info->cluster.passive;
|
|
memcpy(instance->clusterId, ctrl_info->clusterId, sizeof(instance->clusterId));
|
|
instance->UnevenSpanSupport =
|
|
ctrl_info->adapterOperations2.supportUnevenSpans;
|
|
if (instance->UnevenSpanSupport) {
|
|
struct fusion_context *fusion = instance->ctrl_context;
|
|
if (MR_ValidateMapInfo(instance))
|
|
fusion->fast_path_io = 1;
|
|
else
|
|
fusion->fast_path_io = 0;
|
|
|
|
}
|
|
if (ctrl_info->host_interface.SRIOV) {
|
|
instance->requestorId = ctrl_info->iov.requestorId;
|
|
if (instance->pdev->device == PCI_DEVICE_ID_LSI_PLASMA) {
|
|
if (!ctrl_info->adapterOperations2.activePassive)
|
|
instance->PlasmaFW111 = 1;
|
|
|
|
dev_info(&instance->pdev->dev, "SR-IOV: firmware type: %s\n",
|
|
instance->PlasmaFW111 ? "1.11" : "new");
|
|
|
|
if (instance->PlasmaFW111) {
|
|
iovPtr = (struct IOV_111 *)
|
|
((unsigned char *)ctrl_info + IOV_111_OFFSET);
|
|
instance->requestorId = iovPtr->requestorId;
|
|
}
|
|
}
|
|
dev_info(&instance->pdev->dev, "SRIOV: VF requestorId %d\n",
|
|
instance->requestorId);
|
|
}
|
|
|
|
instance->crash_dump_fw_support =
|
|
ctrl_info->adapterOperations3.supportCrashDump;
|
|
instance->crash_dump_drv_support =
|
|
(instance->crash_dump_fw_support &&
|
|
instance->crash_dump_buf);
|
|
if (instance->crash_dump_drv_support)
|
|
megasas_set_crash_dump_params(instance,
|
|
MR_CRASH_BUF_TURN_OFF);
|
|
|
|
else {
|
|
if (instance->crash_dump_buf)
|
|
pci_free_consistent(instance->pdev,
|
|
CRASH_DMA_BUF_SIZE,
|
|
instance->crash_dump_buf,
|
|
instance->crash_dump_h);
|
|
instance->crash_dump_buf = NULL;
|
|
}
|
|
|
|
|
|
dev_info(&instance->pdev->dev,
|
|
"pci id\t\t: (0x%04x)/(0x%04x)/(0x%04x)/(0x%04x)\n",
|
|
le16_to_cpu(ctrl_info->pci.vendor_id),
|
|
le16_to_cpu(ctrl_info->pci.device_id),
|
|
le16_to_cpu(ctrl_info->pci.sub_vendor_id),
|
|
le16_to_cpu(ctrl_info->pci.sub_device_id));
|
|
dev_info(&instance->pdev->dev, "unevenspan support : %s\n",
|
|
instance->UnevenSpanSupport ? "yes" : "no");
|
|
dev_info(&instance->pdev->dev, "firmware crash dump : %s\n",
|
|
instance->crash_dump_drv_support ? "yes" : "no");
|
|
dev_info(&instance->pdev->dev, "jbod sync map : %s\n",
|
|
instance->use_seqnum_jbod_fp ? "yes" : "no");
|
|
|
|
|
|
instance->max_sectors_per_req = instance->max_num_sge *
|
|
SGE_BUFFER_SIZE / 512;
|
|
if (tmp_sectors && (instance->max_sectors_per_req > tmp_sectors))
|
|
instance->max_sectors_per_req = tmp_sectors;
|
|
|
|
/* Check for valid throttlequeuedepth module parameter */
|
|
if (throttlequeuedepth &&
|
|
throttlequeuedepth <= instance->max_scsi_cmds)
|
|
instance->throttlequeuedepth = throttlequeuedepth;
|
|
else
|
|
instance->throttlequeuedepth =
|
|
MEGASAS_THROTTLE_QUEUE_DEPTH;
|
|
|
|
if ((resetwaittime < 1) ||
|
|
(resetwaittime > MEGASAS_RESET_WAIT_TIME))
|
|
resetwaittime = MEGASAS_RESET_WAIT_TIME;
|
|
|
|
if ((scmd_timeout < 10) || (scmd_timeout > MEGASAS_DEFAULT_CMD_TIMEOUT))
|
|
scmd_timeout = MEGASAS_DEFAULT_CMD_TIMEOUT;
|
|
|
|
/* Launch SR-IOV heartbeat timer */
|
|
if (instance->requestorId) {
|
|
if (!megasas_sriov_start_heartbeat(instance, 1))
|
|
megasas_start_timer(instance);
|
|
else
|
|
instance->skip_heartbeat_timer_del = 1;
|
|
}
|
|
|
|
return 0;
|
|
|
|
fail_get_ld_pd_list:
|
|
instance->instancet->disable_intr(instance);
|
|
fail_init_adapter:
|
|
megasas_destroy_irqs(instance);
|
|
fail_setup_irqs:
|
|
if (instance->msix_vectors)
|
|
pci_free_irq_vectors(instance->pdev);
|
|
instance->msix_vectors = 0;
|
|
fail_alloc_dma_buf:
|
|
megasas_free_ctrl_dma_buffers(instance);
|
|
megasas_free_ctrl_mem(instance);
|
|
fail_ready_state:
|
|
iounmap(instance->reg_set);
|
|
|
|
fail_ioremap:
|
|
pci_release_selected_regions(instance->pdev, 1<<instance->bar);
|
|
|
|
dev_err(&instance->pdev->dev, "Failed from %s %d\n",
|
|
__func__, __LINE__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/**
|
|
* megasas_release_mfi - Reverses the FW initialization
|
|
* @instance: Adapter soft state
|
|
*/
|
|
static void megasas_release_mfi(struct megasas_instance *instance)
|
|
{
|
|
u32 reply_q_sz = sizeof(u32) *(instance->max_mfi_cmds + 1);
|
|
|
|
if (instance->reply_queue)
|
|
pci_free_consistent(instance->pdev, reply_q_sz,
|
|
instance->reply_queue, instance->reply_queue_h);
|
|
|
|
megasas_free_cmds(instance);
|
|
|
|
iounmap(instance->reg_set);
|
|
|
|
pci_release_selected_regions(instance->pdev, 1<<instance->bar);
|
|
}
|
|
|
|
/**
|
|
* megasas_get_seq_num - Gets latest event sequence numbers
|
|
* @instance: Adapter soft state
|
|
* @eli: FW event log sequence numbers information
|
|
*
|
|
* FW maintains a log of all events in a non-volatile area. Upper layers would
|
|
* usually find out the latest sequence number of the events, the seq number at
|
|
* the boot etc. They would "read" all the events below the latest seq number
|
|
* by issuing a direct fw cmd (DCMD). For the future events (beyond latest seq
|
|
* number), they would subsribe to AEN (asynchronous event notification) and
|
|
* wait for the events to happen.
|
|
*/
|
|
static int
|
|
megasas_get_seq_num(struct megasas_instance *instance,
|
|
struct megasas_evt_log_info *eli)
|
|
{
|
|
struct megasas_cmd *cmd;
|
|
struct megasas_dcmd_frame *dcmd;
|
|
struct megasas_evt_log_info *el_info;
|
|
dma_addr_t el_info_h = 0;
|
|
int ret;
|
|
|
|
cmd = megasas_get_cmd(instance);
|
|
|
|
if (!cmd) {
|
|
return -ENOMEM;
|
|
}
|
|
|
|
dcmd = &cmd->frame->dcmd;
|
|
el_info = pci_alloc_consistent(instance->pdev,
|
|
sizeof(struct megasas_evt_log_info),
|
|
&el_info_h);
|
|
|
|
if (!el_info) {
|
|
megasas_return_cmd(instance, cmd);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
memset(el_info, 0, sizeof(*el_info));
|
|
memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
|
|
|
|
dcmd->cmd = MFI_CMD_DCMD;
|
|
dcmd->cmd_status = 0x0;
|
|
dcmd->sge_count = 1;
|
|
dcmd->flags = MFI_FRAME_DIR_READ;
|
|
dcmd->timeout = 0;
|
|
dcmd->pad_0 = 0;
|
|
dcmd->data_xfer_len = cpu_to_le32(sizeof(struct megasas_evt_log_info));
|
|
dcmd->opcode = cpu_to_le32(MR_DCMD_CTRL_EVENT_GET_INFO);
|
|
|
|
megasas_set_dma_settings(instance, dcmd, el_info_h,
|
|
sizeof(struct megasas_evt_log_info));
|
|
|
|
ret = megasas_issue_blocked_cmd(instance, cmd, MFI_IO_TIMEOUT_SECS);
|
|
if (ret != DCMD_SUCCESS) {
|
|
dev_err(&instance->pdev->dev, "Failed from %s %d\n",
|
|
__func__, __LINE__);
|
|
goto dcmd_failed;
|
|
}
|
|
|
|
/*
|
|
* Copy the data back into callers buffer
|
|
*/
|
|
eli->newest_seq_num = el_info->newest_seq_num;
|
|
eli->oldest_seq_num = el_info->oldest_seq_num;
|
|
eli->clear_seq_num = el_info->clear_seq_num;
|
|
eli->shutdown_seq_num = el_info->shutdown_seq_num;
|
|
eli->boot_seq_num = el_info->boot_seq_num;
|
|
|
|
dcmd_failed:
|
|
pci_free_consistent(instance->pdev, sizeof(struct megasas_evt_log_info),
|
|
el_info, el_info_h);
|
|
|
|
megasas_return_cmd(instance, cmd);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* megasas_register_aen - Registers for asynchronous event notification
|
|
* @instance: Adapter soft state
|
|
* @seq_num: The starting sequence number
|
|
* @class_locale: Class of the event
|
|
*
|
|
* This function subscribes for AEN for events beyond the @seq_num. It requests
|
|
* to be notified if and only if the event is of type @class_locale
|
|
*/
|
|
static int
|
|
megasas_register_aen(struct megasas_instance *instance, u32 seq_num,
|
|
u32 class_locale_word)
|
|
{
|
|
int ret_val;
|
|
struct megasas_cmd *cmd;
|
|
struct megasas_dcmd_frame *dcmd;
|
|
union megasas_evt_class_locale curr_aen;
|
|
union megasas_evt_class_locale prev_aen;
|
|
|
|
/*
|
|
* If there an AEN pending already (aen_cmd), check if the
|
|
* class_locale of that pending AEN is inclusive of the new
|
|
* AEN request we currently have. If it is, then we don't have
|
|
* to do anything. In other words, whichever events the current
|
|
* AEN request is subscribing to, have already been subscribed
|
|
* to.
|
|
*
|
|
* If the old_cmd is _not_ inclusive, then we have to abort
|
|
* that command, form a class_locale that is superset of both
|
|
* old and current and re-issue to the FW
|
|
*/
|
|
|
|
curr_aen.word = class_locale_word;
|
|
|
|
if (instance->aen_cmd) {
|
|
|
|
prev_aen.word =
|
|
le32_to_cpu(instance->aen_cmd->frame->dcmd.mbox.w[1]);
|
|
|
|
if ((curr_aen.members.class < MFI_EVT_CLASS_DEBUG) ||
|
|
(curr_aen.members.class > MFI_EVT_CLASS_DEAD)) {
|
|
dev_info(&instance->pdev->dev,
|
|
"%s %d out of range class %d send by application\n",
|
|
__func__, __LINE__, curr_aen.members.class);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* A class whose enum value is smaller is inclusive of all
|
|
* higher values. If a PROGRESS (= -1) was previously
|
|
* registered, then a new registration requests for higher
|
|
* classes need not be sent to FW. They are automatically
|
|
* included.
|
|
*
|
|
* Locale numbers don't have such hierarchy. They are bitmap
|
|
* values
|
|
*/
|
|
if ((prev_aen.members.class <= curr_aen.members.class) &&
|
|
!((prev_aen.members.locale & curr_aen.members.locale) ^
|
|
curr_aen.members.locale)) {
|
|
/*
|
|
* Previously issued event registration includes
|
|
* current request. Nothing to do.
|
|
*/
|
|
return 0;
|
|
} else {
|
|
curr_aen.members.locale |= prev_aen.members.locale;
|
|
|
|
if (prev_aen.members.class < curr_aen.members.class)
|
|
curr_aen.members.class = prev_aen.members.class;
|
|
|
|
instance->aen_cmd->abort_aen = 1;
|
|
ret_val = megasas_issue_blocked_abort_cmd(instance,
|
|
instance->
|
|
aen_cmd, 30);
|
|
|
|
if (ret_val) {
|
|
dev_printk(KERN_DEBUG, &instance->pdev->dev, "Failed to abort "
|
|
"previous AEN command\n");
|
|
return ret_val;
|
|
}
|
|
}
|
|
}
|
|
|
|
cmd = megasas_get_cmd(instance);
|
|
|
|
if (!cmd)
|
|
return -ENOMEM;
|
|
|
|
dcmd = &cmd->frame->dcmd;
|
|
|
|
memset(instance->evt_detail, 0, sizeof(struct megasas_evt_detail));
|
|
|
|
/*
|
|
* Prepare DCMD for aen registration
|
|
*/
|
|
memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
|
|
|
|
dcmd->cmd = MFI_CMD_DCMD;
|
|
dcmd->cmd_status = 0x0;
|
|
dcmd->sge_count = 1;
|
|
dcmd->flags = MFI_FRAME_DIR_READ;
|
|
dcmd->timeout = 0;
|
|
dcmd->pad_0 = 0;
|
|
dcmd->data_xfer_len = cpu_to_le32(sizeof(struct megasas_evt_detail));
|
|
dcmd->opcode = cpu_to_le32(MR_DCMD_CTRL_EVENT_WAIT);
|
|
dcmd->mbox.w[0] = cpu_to_le32(seq_num);
|
|
instance->last_seq_num = seq_num;
|
|
dcmd->mbox.w[1] = cpu_to_le32(curr_aen.word);
|
|
|
|
megasas_set_dma_settings(instance, dcmd, instance->evt_detail_h,
|
|
sizeof(struct megasas_evt_detail));
|
|
|
|
if (instance->aen_cmd != NULL) {
|
|
megasas_return_cmd(instance, cmd);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Store reference to the cmd used to register for AEN. When an
|
|
* application wants us to register for AEN, we have to abort this
|
|
* cmd and re-register with a new EVENT LOCALE supplied by that app
|
|
*/
|
|
instance->aen_cmd = cmd;
|
|
|
|
/*
|
|
* Issue the aen registration frame
|
|
*/
|
|
instance->instancet->issue_dcmd(instance, cmd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* megasas_get_target_prop - Send DCMD with below details to firmware.
|
|
*
|
|
* This DCMD will fetch few properties of LD/system PD defined
|
|
* in MR_TARGET_DEV_PROPERTIES. eg. Queue Depth, MDTS value.
|
|
*
|
|
* DCMD send by drivers whenever new target is added to the OS.
|
|
*
|
|
* dcmd.opcode - MR_DCMD_DEV_GET_TARGET_PROP
|
|
* dcmd.mbox.b[0] - DCMD is to be fired for LD or system PD.
|
|
* 0 = system PD, 1 = LD.
|
|
* dcmd.mbox.s[1] - TargetID for LD/system PD.
|
|
* dcmd.sge IN - Pointer to return MR_TARGET_DEV_PROPERTIES.
|
|
*
|
|
* @instance: Adapter soft state
|
|
* @sdev: OS provided scsi device
|
|
*
|
|
* Returns 0 on success non-zero on failure.
|
|
*/
|
|
static int
|
|
megasas_get_target_prop(struct megasas_instance *instance,
|
|
struct scsi_device *sdev)
|
|
{
|
|
int ret;
|
|
struct megasas_cmd *cmd;
|
|
struct megasas_dcmd_frame *dcmd;
|
|
u16 targetId = (sdev->channel % 2) + sdev->id;
|
|
|
|
cmd = megasas_get_cmd(instance);
|
|
|
|
if (!cmd) {
|
|
dev_err(&instance->pdev->dev,
|
|
"Failed to get cmd %s\n", __func__);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
dcmd = &cmd->frame->dcmd;
|
|
|
|
memset(instance->tgt_prop, 0, sizeof(*instance->tgt_prop));
|
|
memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
|
|
dcmd->mbox.b[0] = MEGASAS_IS_LOGICAL(sdev);
|
|
|
|
dcmd->mbox.s[1] = cpu_to_le16(targetId);
|
|
dcmd->cmd = MFI_CMD_DCMD;
|
|
dcmd->cmd_status = 0xFF;
|
|
dcmd->sge_count = 1;
|
|
dcmd->flags = MFI_FRAME_DIR_READ;
|
|
dcmd->timeout = 0;
|
|
dcmd->pad_0 = 0;
|
|
dcmd->data_xfer_len =
|
|
cpu_to_le32(sizeof(struct MR_TARGET_PROPERTIES));
|
|
dcmd->opcode = cpu_to_le32(MR_DCMD_DRV_GET_TARGET_PROP);
|
|
|
|
megasas_set_dma_settings(instance, dcmd, instance->tgt_prop_h,
|
|
sizeof(struct MR_TARGET_PROPERTIES));
|
|
|
|
if ((instance->adapter_type != MFI_SERIES) &&
|
|
!instance->mask_interrupts)
|
|
ret = megasas_issue_blocked_cmd(instance,
|
|
cmd, MFI_IO_TIMEOUT_SECS);
|
|
else
|
|
ret = megasas_issue_polled(instance, cmd);
|
|
|
|
switch (ret) {
|
|
case DCMD_TIMEOUT:
|
|
switch (dcmd_timeout_ocr_possible(instance)) {
|
|
case INITIATE_OCR:
|
|
cmd->flags |= DRV_DCMD_SKIP_REFIRE;
|
|
megasas_reset_fusion(instance->host,
|
|
MFI_IO_TIMEOUT_OCR);
|
|
break;
|
|
case KILL_ADAPTER:
|
|
megaraid_sas_kill_hba(instance);
|
|
break;
|
|
case IGNORE_TIMEOUT:
|
|
dev_info(&instance->pdev->dev,
|
|
"Ignore DCMD timeout: %s %d\n",
|
|
__func__, __LINE__);
|
|
break;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
megasas_return_cmd(instance, cmd);
|
|
}
|
|
if (ret != DCMD_SUCCESS)
|
|
dev_err(&instance->pdev->dev,
|
|
"return from %s %d return value %d\n",
|
|
__func__, __LINE__, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* megasas_start_aen - Subscribes to AEN during driver load time
|
|
* @instance: Adapter soft state
|
|
*/
|
|
static int megasas_start_aen(struct megasas_instance *instance)
|
|
{
|
|
struct megasas_evt_log_info eli;
|
|
union megasas_evt_class_locale class_locale;
|
|
|
|
/*
|
|
* Get the latest sequence number from FW
|
|
*/
|
|
memset(&eli, 0, sizeof(eli));
|
|
|
|
if (megasas_get_seq_num(instance, &eli))
|
|
return -1;
|
|
|
|
/*
|
|
* Register AEN with FW for latest sequence number plus 1
|
|
*/
|
|
class_locale.members.reserved = 0;
|
|
class_locale.members.locale = MR_EVT_LOCALE_ALL;
|
|
class_locale.members.class = MR_EVT_CLASS_DEBUG;
|
|
|
|
return megasas_register_aen(instance,
|
|
le32_to_cpu(eli.newest_seq_num) + 1,
|
|
class_locale.word);
|
|
}
|
|
|
|
/**
|
|
* megasas_io_attach - Attaches this driver to SCSI mid-layer
|
|
* @instance: Adapter soft state
|
|
*/
|
|
static int megasas_io_attach(struct megasas_instance *instance)
|
|
{
|
|
struct Scsi_Host *host = instance->host;
|
|
|
|
/*
|
|
* Export parameters required by SCSI mid-layer
|
|
*/
|
|
host->unique_id = instance->unique_id;
|
|
host->can_queue = instance->max_scsi_cmds;
|
|
host->this_id = instance->init_id;
|
|
host->sg_tablesize = instance->max_num_sge;
|
|
|
|
if (instance->fw_support_ieee)
|
|
instance->max_sectors_per_req = MEGASAS_MAX_SECTORS_IEEE;
|
|
|
|
/*
|
|
* Check if the module parameter value for max_sectors can be used
|
|
*/
|
|
if (max_sectors && max_sectors < instance->max_sectors_per_req)
|
|
instance->max_sectors_per_req = max_sectors;
|
|
else {
|
|
if (max_sectors) {
|
|
if (((instance->pdev->device ==
|
|
PCI_DEVICE_ID_LSI_SAS1078GEN2) ||
|
|
(instance->pdev->device ==
|
|
PCI_DEVICE_ID_LSI_SAS0079GEN2)) &&
|
|
(max_sectors <= MEGASAS_MAX_SECTORS)) {
|
|
instance->max_sectors_per_req = max_sectors;
|
|
} else {
|
|
dev_info(&instance->pdev->dev, "max_sectors should be > 0"
|
|
"and <= %d (or < 1MB for GEN2 controller)\n",
|
|
instance->max_sectors_per_req);
|
|
}
|
|
}
|
|
}
|
|
|
|
host->max_sectors = instance->max_sectors_per_req;
|
|
host->cmd_per_lun = MEGASAS_DEFAULT_CMD_PER_LUN;
|
|
host->max_channel = MEGASAS_MAX_CHANNELS - 1;
|
|
host->max_id = MEGASAS_MAX_DEV_PER_CHANNEL;
|
|
host->max_lun = MEGASAS_MAX_LUN;
|
|
host->max_cmd_len = 16;
|
|
|
|
/*
|
|
* Notify the mid-layer about the new controller
|
|
*/
|
|
if (scsi_add_host(host, &instance->pdev->dev)) {
|
|
dev_err(&instance->pdev->dev,
|
|
"Failed to add host from %s %d\n",
|
|
__func__, __LINE__);
|
|
return -ENODEV;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* megasas_set_dma_mask - Set DMA mask for supported controllers
|
|
*
|
|
* @instance: Adapter soft state
|
|
* Description:
|
|
*
|
|
* For Ventura, driver/FW will operate in 64bit DMA addresses.
|
|
*
|
|
* For invader-
|
|
* By default, driver/FW will operate in 32bit DMA addresses
|
|
* for consistent DMA mapping but if 32 bit consistent
|
|
* DMA mask fails, driver will try with 64 bit consistent
|
|
* mask provided FW is true 64bit DMA capable
|
|
*
|
|
* For older controllers(Thunderbolt and MFI based adapters)-
|
|
* driver/FW will operate in 32 bit consistent DMA addresses.
|
|
*/
|
|
static int
|
|
megasas_set_dma_mask(struct megasas_instance *instance)
|
|
{
|
|
u64 consistent_mask;
|
|
struct pci_dev *pdev;
|
|
u32 scratch_pad_2;
|
|
|
|
pdev = instance->pdev;
|
|
consistent_mask = (instance->adapter_type == VENTURA_SERIES) ?
|
|
DMA_BIT_MASK(64) : DMA_BIT_MASK(32);
|
|
|
|
if (IS_DMA64) {
|
|
if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)) &&
|
|
dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)))
|
|
goto fail_set_dma_mask;
|
|
|
|
if ((*pdev->dev.dma_mask == DMA_BIT_MASK(64)) &&
|
|
(dma_set_coherent_mask(&pdev->dev, consistent_mask) &&
|
|
dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)))) {
|
|
/*
|
|
* If 32 bit DMA mask fails, then try for 64 bit mask
|
|
* for FW capable of handling 64 bit DMA.
|
|
*/
|
|
scratch_pad_2 = readl
|
|
(&instance->reg_set->outbound_scratch_pad_2);
|
|
|
|
if (!(scratch_pad_2 & MR_CAN_HANDLE_64_BIT_DMA_OFFSET))
|
|
goto fail_set_dma_mask;
|
|
else if (dma_set_mask_and_coherent(&pdev->dev,
|
|
DMA_BIT_MASK(64)))
|
|
goto fail_set_dma_mask;
|
|
}
|
|
} else if (dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)))
|
|
goto fail_set_dma_mask;
|
|
|
|
if (pdev->dev.coherent_dma_mask == DMA_BIT_MASK(32))
|
|
instance->consistent_mask_64bit = false;
|
|
else
|
|
instance->consistent_mask_64bit = true;
|
|
|
|
dev_info(&pdev->dev, "%s bit DMA mask and %s bit consistent mask\n",
|
|
((*pdev->dev.dma_mask == DMA_BIT_MASK(64)) ? "64" : "32"),
|
|
(instance->consistent_mask_64bit ? "64" : "32"));
|
|
|
|
return 0;
|
|
|
|
fail_set_dma_mask:
|
|
dev_err(&pdev->dev, "Failed to set DMA mask\n");
|
|
return -1;
|
|
|
|
}
|
|
|
|
/*
|
|
* megasas_set_adapter_type - Set adapter type.
|
|
* Supported controllers can be divided in
|
|
* 4 categories- enum MR_ADAPTER_TYPE {
|
|
* MFI_SERIES = 1,
|
|
* THUNDERBOLT_SERIES = 2,
|
|
* INVADER_SERIES = 3,
|
|
* VENTURA_SERIES = 4,
|
|
* };
|
|
* @instance: Adapter soft state
|
|
* return: void
|
|
*/
|
|
static inline void megasas_set_adapter_type(struct megasas_instance *instance)
|
|
{
|
|
if ((instance->pdev->vendor == PCI_VENDOR_ID_DELL) &&
|
|
(instance->pdev->device == PCI_DEVICE_ID_DELL_PERC5)) {
|
|
instance->adapter_type = MFI_SERIES;
|
|
} else {
|
|
switch (instance->pdev->device) {
|
|
case PCI_DEVICE_ID_LSI_VENTURA:
|
|
case PCI_DEVICE_ID_LSI_CRUSADER:
|
|
case PCI_DEVICE_ID_LSI_HARPOON:
|
|
case PCI_DEVICE_ID_LSI_TOMCAT:
|
|
case PCI_DEVICE_ID_LSI_VENTURA_4PORT:
|
|
case PCI_DEVICE_ID_LSI_CRUSADER_4PORT:
|
|
instance->adapter_type = VENTURA_SERIES;
|
|
break;
|
|
case PCI_DEVICE_ID_LSI_FUSION:
|
|
case PCI_DEVICE_ID_LSI_PLASMA:
|
|
instance->adapter_type = THUNDERBOLT_SERIES;
|
|
break;
|
|
case PCI_DEVICE_ID_LSI_INVADER:
|
|
case PCI_DEVICE_ID_LSI_INTRUDER:
|
|
case PCI_DEVICE_ID_LSI_INTRUDER_24:
|
|
case PCI_DEVICE_ID_LSI_CUTLASS_52:
|
|
case PCI_DEVICE_ID_LSI_CUTLASS_53:
|
|
case PCI_DEVICE_ID_LSI_FURY:
|
|
instance->adapter_type = INVADER_SERIES;
|
|
break;
|
|
default: /* For all other supported controllers */
|
|
instance->adapter_type = MFI_SERIES;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
static inline int megasas_alloc_mfi_ctrl_mem(struct megasas_instance *instance)
|
|
{
|
|
instance->producer = pci_alloc_consistent(instance->pdev, sizeof(u32),
|
|
&instance->producer_h);
|
|
instance->consumer = pci_alloc_consistent(instance->pdev, sizeof(u32),
|
|
&instance->consumer_h);
|
|
|
|
if (!instance->producer || !instance->consumer) {
|
|
dev_err(&instance->pdev->dev,
|
|
"Failed to allocate memory for producer, consumer\n");
|
|
return -1;
|
|
}
|
|
|
|
*instance->producer = 0;
|
|
*instance->consumer = 0;
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* megasas_alloc_ctrl_mem - Allocate per controller memory for core data
|
|
* structures which are not common across MFI
|
|
* adapters and fusion adapters.
|
|
* For MFI based adapters, allocate producer and
|
|
* consumer buffers. For fusion adapters, allocate
|
|
* memory for fusion context.
|
|
* @instance: Adapter soft state
|
|
* return: 0 for SUCCESS
|
|
*/
|
|
static int megasas_alloc_ctrl_mem(struct megasas_instance *instance)
|
|
{
|
|
switch (instance->adapter_type) {
|
|
case MFI_SERIES:
|
|
if (megasas_alloc_mfi_ctrl_mem(instance))
|
|
return -ENOMEM;
|
|
break;
|
|
case VENTURA_SERIES:
|
|
case THUNDERBOLT_SERIES:
|
|
case INVADER_SERIES:
|
|
if (megasas_alloc_fusion_context(instance))
|
|
return -ENOMEM;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* megasas_free_ctrl_mem - Free fusion context for fusion adapters and
|
|
* producer, consumer buffers for MFI adapters
|
|
*
|
|
* @instance - Adapter soft instance
|
|
*
|
|
*/
|
|
static inline void megasas_free_ctrl_mem(struct megasas_instance *instance)
|
|
{
|
|
if (instance->adapter_type == MFI_SERIES) {
|
|
if (instance->producer)
|
|
pci_free_consistent(instance->pdev, sizeof(u32),
|
|
instance->producer,
|
|
instance->producer_h);
|
|
if (instance->consumer)
|
|
pci_free_consistent(instance->pdev, sizeof(u32),
|
|
instance->consumer,
|
|
instance->consumer_h);
|
|
} else {
|
|
megasas_free_fusion_context(instance);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* megasas_alloc_ctrl_dma_buffers - Allocate consistent DMA buffers during
|
|
* driver load time
|
|
*
|
|
* @instance- Adapter soft instance
|
|
* @return- O for SUCCESS
|
|
*/
|
|
static inline
|
|
int megasas_alloc_ctrl_dma_buffers(struct megasas_instance *instance)
|
|
{
|
|
struct pci_dev *pdev = instance->pdev;
|
|
struct fusion_context *fusion = instance->ctrl_context;
|
|
|
|
instance->evt_detail =
|
|
pci_alloc_consistent(pdev,
|
|
sizeof(struct megasas_evt_detail),
|
|
&instance->evt_detail_h);
|
|
|
|
if (!instance->evt_detail) {
|
|
dev_err(&instance->pdev->dev,
|
|
"Failed to allocate event detail buffer\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
if (fusion) {
|
|
fusion->ioc_init_request =
|
|
dma_alloc_coherent(&pdev->dev,
|
|
sizeof(struct MPI2_IOC_INIT_REQUEST),
|
|
&fusion->ioc_init_request_phys,
|
|
GFP_KERNEL);
|
|
|
|
if (!fusion->ioc_init_request) {
|
|
dev_err(&pdev->dev,
|
|
"Failed to allocate PD list buffer\n");
|
|
return -ENOMEM;
|
|
}
|
|
}
|
|
|
|
instance->pd_list_buf =
|
|
pci_alloc_consistent(pdev,
|
|
MEGASAS_MAX_PD * sizeof(struct MR_PD_LIST),
|
|
&instance->pd_list_buf_h);
|
|
|
|
if (!instance->pd_list_buf) {
|
|
dev_err(&pdev->dev, "Failed to allocate PD list buffer\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
instance->ctrl_info_buf =
|
|
pci_alloc_consistent(pdev,
|
|
sizeof(struct megasas_ctrl_info),
|
|
&instance->ctrl_info_buf_h);
|
|
|
|
if (!instance->ctrl_info_buf) {
|
|
dev_err(&pdev->dev,
|
|
"Failed to allocate controller info buffer\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
instance->ld_list_buf =
|
|
pci_alloc_consistent(pdev,
|
|
sizeof(struct MR_LD_LIST),
|
|
&instance->ld_list_buf_h);
|
|
|
|
if (!instance->ld_list_buf) {
|
|
dev_err(&pdev->dev, "Failed to allocate LD list buffer\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
instance->ld_targetid_list_buf =
|
|
pci_alloc_consistent(pdev,
|
|
sizeof(struct MR_LD_TARGETID_LIST),
|
|
&instance->ld_targetid_list_buf_h);
|
|
|
|
if (!instance->ld_targetid_list_buf) {
|
|
dev_err(&pdev->dev,
|
|
"Failed to allocate LD targetid list buffer\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
if (!reset_devices) {
|
|
instance->system_info_buf =
|
|
pci_alloc_consistent(pdev,
|
|
sizeof(struct MR_DRV_SYSTEM_INFO),
|
|
&instance->system_info_h);
|
|
instance->pd_info =
|
|
pci_alloc_consistent(pdev,
|
|
sizeof(struct MR_PD_INFO),
|
|
&instance->pd_info_h);
|
|
instance->tgt_prop =
|
|
pci_alloc_consistent(pdev,
|
|
sizeof(struct MR_TARGET_PROPERTIES),
|
|
&instance->tgt_prop_h);
|
|
instance->crash_dump_buf =
|
|
pci_alloc_consistent(pdev,
|
|
CRASH_DMA_BUF_SIZE,
|
|
&instance->crash_dump_h);
|
|
|
|
if (!instance->system_info_buf)
|
|
dev_err(&instance->pdev->dev,
|
|
"Failed to allocate system info buffer\n");
|
|
|
|
if (!instance->pd_info)
|
|
dev_err(&instance->pdev->dev,
|
|
"Failed to allocate pd_info buffer\n");
|
|
|
|
if (!instance->tgt_prop)
|
|
dev_err(&instance->pdev->dev,
|
|
"Failed to allocate tgt_prop buffer\n");
|
|
|
|
if (!instance->crash_dump_buf)
|
|
dev_err(&instance->pdev->dev,
|
|
"Failed to allocate crash dump buffer\n");
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* megasas_free_ctrl_dma_buffers - Free consistent DMA buffers allocated
|
|
* during driver load time
|
|
*
|
|
* @instance- Adapter soft instance
|
|
*
|
|
*/
|
|
static inline
|
|
void megasas_free_ctrl_dma_buffers(struct megasas_instance *instance)
|
|
{
|
|
struct pci_dev *pdev = instance->pdev;
|
|
struct fusion_context *fusion = instance->ctrl_context;
|
|
|
|
if (instance->evt_detail)
|
|
pci_free_consistent(pdev, sizeof(struct megasas_evt_detail),
|
|
instance->evt_detail,
|
|
instance->evt_detail_h);
|
|
|
|
if (fusion && fusion->ioc_init_request)
|
|
dma_free_coherent(&pdev->dev,
|
|
sizeof(struct MPI2_IOC_INIT_REQUEST),
|
|
fusion->ioc_init_request,
|
|
fusion->ioc_init_request_phys);
|
|
|
|
if (instance->pd_list_buf)
|
|
pci_free_consistent(pdev,
|
|
MEGASAS_MAX_PD * sizeof(struct MR_PD_LIST),
|
|
instance->pd_list_buf,
|
|
instance->pd_list_buf_h);
|
|
|
|
if (instance->ld_list_buf)
|
|
pci_free_consistent(pdev, sizeof(struct MR_LD_LIST),
|
|
instance->ld_list_buf,
|
|
instance->ld_list_buf_h);
|
|
|
|
if (instance->ld_targetid_list_buf)
|
|
pci_free_consistent(pdev, sizeof(struct MR_LD_TARGETID_LIST),
|
|
instance->ld_targetid_list_buf,
|
|
instance->ld_targetid_list_buf_h);
|
|
|
|
if (instance->ctrl_info_buf)
|
|
pci_free_consistent(pdev, sizeof(struct megasas_ctrl_info),
|
|
instance->ctrl_info_buf,
|
|
instance->ctrl_info_buf_h);
|
|
|
|
if (instance->system_info_buf)
|
|
pci_free_consistent(pdev, sizeof(struct MR_DRV_SYSTEM_INFO),
|
|
instance->system_info_buf,
|
|
instance->system_info_h);
|
|
|
|
if (instance->pd_info)
|
|
pci_free_consistent(pdev, sizeof(struct MR_PD_INFO),
|
|
instance->pd_info, instance->pd_info_h);
|
|
|
|
if (instance->tgt_prop)
|
|
pci_free_consistent(pdev, sizeof(struct MR_TARGET_PROPERTIES),
|
|
instance->tgt_prop, instance->tgt_prop_h);
|
|
|
|
if (instance->crash_dump_buf)
|
|
pci_free_consistent(pdev, CRASH_DMA_BUF_SIZE,
|
|
instance->crash_dump_buf,
|
|
instance->crash_dump_h);
|
|
}
|
|
|
|
/*
|
|
* megasas_init_ctrl_params - Initialize controller's instance
|
|
* parameters before FW init
|
|
* @instance - Adapter soft instance
|
|
* @return - void
|
|
*/
|
|
static inline void megasas_init_ctrl_params(struct megasas_instance *instance)
|
|
{
|
|
instance->fw_crash_state = UNAVAILABLE;
|
|
|
|
megasas_poll_wait_aen = 0;
|
|
instance->issuepend_done = 1;
|
|
atomic_set(&instance->adprecovery, MEGASAS_HBA_OPERATIONAL);
|
|
|
|
/*
|
|
* Initialize locks and queues
|
|
*/
|
|
INIT_LIST_HEAD(&instance->cmd_pool);
|
|
INIT_LIST_HEAD(&instance->internal_reset_pending_q);
|
|
|
|
atomic_set(&instance->fw_outstanding, 0);
|
|
|
|
init_waitqueue_head(&instance->int_cmd_wait_q);
|
|
init_waitqueue_head(&instance->abort_cmd_wait_q);
|
|
|
|
spin_lock_init(&instance->crashdump_lock);
|
|
spin_lock_init(&instance->mfi_pool_lock);
|
|
spin_lock_init(&instance->hba_lock);
|
|
spin_lock_init(&instance->stream_lock);
|
|
spin_lock_init(&instance->completion_lock);
|
|
|
|
mutex_init(&instance->reset_mutex);
|
|
|
|
if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
|
|
(instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0071SKINNY))
|
|
instance->flag_ieee = 1;
|
|
|
|
megasas_dbg_lvl = 0;
|
|
instance->flag = 0;
|
|
instance->unload = 1;
|
|
instance->last_time = 0;
|
|
instance->disableOnlineCtrlReset = 1;
|
|
instance->UnevenSpanSupport = 0;
|
|
|
|
if (instance->adapter_type != MFI_SERIES) {
|
|
INIT_WORK(&instance->work_init, megasas_fusion_ocr_wq);
|
|
INIT_WORK(&instance->crash_init, megasas_fusion_crash_dump_wq);
|
|
} else {
|
|
INIT_WORK(&instance->work_init, process_fw_state_change_wq);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* megasas_probe_one - PCI hotplug entry point
|
|
* @pdev: PCI device structure
|
|
* @id: PCI ids of supported hotplugged adapter
|
|
*/
|
|
static int megasas_probe_one(struct pci_dev *pdev,
|
|
const struct pci_device_id *id)
|
|
{
|
|
int rval, pos;
|
|
struct Scsi_Host *host;
|
|
struct megasas_instance *instance;
|
|
u16 control = 0;
|
|
|
|
/* Reset MSI-X in the kdump kernel */
|
|
if (reset_devices) {
|
|
pos = pci_find_capability(pdev, PCI_CAP_ID_MSIX);
|
|
if (pos) {
|
|
pci_read_config_word(pdev, pos + PCI_MSIX_FLAGS,
|
|
&control);
|
|
if (control & PCI_MSIX_FLAGS_ENABLE) {
|
|
dev_info(&pdev->dev, "resetting MSI-X\n");
|
|
pci_write_config_word(pdev,
|
|
pos + PCI_MSIX_FLAGS,
|
|
control &
|
|
~PCI_MSIX_FLAGS_ENABLE);
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* PCI prepping: enable device set bus mastering and dma mask
|
|
*/
|
|
rval = pci_enable_device_mem(pdev);
|
|
|
|
if (rval) {
|
|
return rval;
|
|
}
|
|
|
|
pci_set_master(pdev);
|
|
|
|
host = scsi_host_alloc(&megasas_template,
|
|
sizeof(struct megasas_instance));
|
|
|
|
if (!host) {
|
|
dev_printk(KERN_DEBUG, &pdev->dev, "scsi_host_alloc failed\n");
|
|
goto fail_alloc_instance;
|
|
}
|
|
|
|
instance = (struct megasas_instance *)host->hostdata;
|
|
memset(instance, 0, sizeof(*instance));
|
|
atomic_set(&instance->fw_reset_no_pci_access, 0);
|
|
|
|
/*
|
|
* Initialize PCI related and misc parameters
|
|
*/
|
|
instance->pdev = pdev;
|
|
instance->host = host;
|
|
instance->unique_id = pdev->bus->number << 8 | pdev->devfn;
|
|
instance->init_id = MEGASAS_DEFAULT_INIT_ID;
|
|
|
|
megasas_set_adapter_type(instance);
|
|
|
|
/*
|
|
* Initialize MFI Firmware
|
|
*/
|
|
if (megasas_init_fw(instance))
|
|
goto fail_init_mfi;
|
|
|
|
if (instance->requestorId) {
|
|
if (instance->PlasmaFW111) {
|
|
instance->vf_affiliation_111 =
|
|
pci_alloc_consistent(pdev, sizeof(struct MR_LD_VF_AFFILIATION_111),
|
|
&instance->vf_affiliation_111_h);
|
|
if (!instance->vf_affiliation_111)
|
|
dev_warn(&pdev->dev, "Can't allocate "
|
|
"memory for VF affiliation buffer\n");
|
|
} else {
|
|
instance->vf_affiliation =
|
|
pci_alloc_consistent(pdev,
|
|
(MAX_LOGICAL_DRIVES + 1) *
|
|
sizeof(struct MR_LD_VF_AFFILIATION),
|
|
&instance->vf_affiliation_h);
|
|
if (!instance->vf_affiliation)
|
|
dev_warn(&pdev->dev, "Can't allocate "
|
|
"memory for VF affiliation buffer\n");
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Store instance in PCI softstate
|
|
*/
|
|
pci_set_drvdata(pdev, instance);
|
|
|
|
/*
|
|
* Add this controller to megasas_mgmt_info structure so that it
|
|
* can be exported to management applications
|
|
*/
|
|
megasas_mgmt_info.count++;
|
|
megasas_mgmt_info.instance[megasas_mgmt_info.max_index] = instance;
|
|
megasas_mgmt_info.max_index++;
|
|
|
|
/*
|
|
* Register with SCSI mid-layer
|
|
*/
|
|
if (megasas_io_attach(instance))
|
|
goto fail_io_attach;
|
|
|
|
instance->unload = 0;
|
|
/*
|
|
* Trigger SCSI to scan our drives
|
|
*/
|
|
scsi_scan_host(host);
|
|
|
|
/*
|
|
* Initiate AEN (Asynchronous Event Notification)
|
|
*/
|
|
if (megasas_start_aen(instance)) {
|
|
dev_printk(KERN_DEBUG, &pdev->dev, "start aen failed\n");
|
|
goto fail_start_aen;
|
|
}
|
|
|
|
/* Get current SR-IOV LD/VF affiliation */
|
|
if (instance->requestorId)
|
|
megasas_get_ld_vf_affiliation(instance, 1);
|
|
|
|
return 0;
|
|
|
|
fail_start_aen:
|
|
fail_io_attach:
|
|
megasas_mgmt_info.count--;
|
|
megasas_mgmt_info.max_index--;
|
|
megasas_mgmt_info.instance[megasas_mgmt_info.max_index] = NULL;
|
|
|
|
instance->instancet->disable_intr(instance);
|
|
megasas_destroy_irqs(instance);
|
|
|
|
if (instance->adapter_type != MFI_SERIES)
|
|
megasas_release_fusion(instance);
|
|
else
|
|
megasas_release_mfi(instance);
|
|
if (instance->msix_vectors)
|
|
pci_free_irq_vectors(instance->pdev);
|
|
fail_init_mfi:
|
|
scsi_host_put(host);
|
|
|
|
fail_alloc_instance:
|
|
pci_disable_device(pdev);
|
|
|
|
return -ENODEV;
|
|
}
|
|
|
|
/**
|
|
* megasas_flush_cache - Requests FW to flush all its caches
|
|
* @instance: Adapter soft state
|
|
*/
|
|
static void megasas_flush_cache(struct megasas_instance *instance)
|
|
{
|
|
struct megasas_cmd *cmd;
|
|
struct megasas_dcmd_frame *dcmd;
|
|
|
|
if (atomic_read(&instance->adprecovery) == MEGASAS_HW_CRITICAL_ERROR)
|
|
return;
|
|
|
|
cmd = megasas_get_cmd(instance);
|
|
|
|
if (!cmd)
|
|
return;
|
|
|
|
dcmd = &cmd->frame->dcmd;
|
|
|
|
memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
|
|
|
|
dcmd->cmd = MFI_CMD_DCMD;
|
|
dcmd->cmd_status = 0x0;
|
|
dcmd->sge_count = 0;
|
|
dcmd->flags = cpu_to_le16(MFI_FRAME_DIR_NONE);
|
|
dcmd->timeout = 0;
|
|
dcmd->pad_0 = 0;
|
|
dcmd->data_xfer_len = 0;
|
|
dcmd->opcode = cpu_to_le32(MR_DCMD_CTRL_CACHE_FLUSH);
|
|
dcmd->mbox.b[0] = MR_FLUSH_CTRL_CACHE | MR_FLUSH_DISK_CACHE;
|
|
|
|
if (megasas_issue_blocked_cmd(instance, cmd, MFI_IO_TIMEOUT_SECS)
|
|
!= DCMD_SUCCESS) {
|
|
dev_err(&instance->pdev->dev,
|
|
"return from %s %d\n", __func__, __LINE__);
|
|
return;
|
|
}
|
|
|
|
megasas_return_cmd(instance, cmd);
|
|
}
|
|
|
|
/**
|
|
* megasas_shutdown_controller - Instructs FW to shutdown the controller
|
|
* @instance: Adapter soft state
|
|
* @opcode: Shutdown/Hibernate
|
|
*/
|
|
static void megasas_shutdown_controller(struct megasas_instance *instance,
|
|
u32 opcode)
|
|
{
|
|
struct megasas_cmd *cmd;
|
|
struct megasas_dcmd_frame *dcmd;
|
|
|
|
if (atomic_read(&instance->adprecovery) == MEGASAS_HW_CRITICAL_ERROR)
|
|
return;
|
|
|
|
cmd = megasas_get_cmd(instance);
|
|
|
|
if (!cmd)
|
|
return;
|
|
|
|
if (instance->aen_cmd)
|
|
megasas_issue_blocked_abort_cmd(instance,
|
|
instance->aen_cmd, MFI_IO_TIMEOUT_SECS);
|
|
if (instance->map_update_cmd)
|
|
megasas_issue_blocked_abort_cmd(instance,
|
|
instance->map_update_cmd, MFI_IO_TIMEOUT_SECS);
|
|
if (instance->jbod_seq_cmd)
|
|
megasas_issue_blocked_abort_cmd(instance,
|
|
instance->jbod_seq_cmd, MFI_IO_TIMEOUT_SECS);
|
|
|
|
dcmd = &cmd->frame->dcmd;
|
|
|
|
memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
|
|
|
|
dcmd->cmd = MFI_CMD_DCMD;
|
|
dcmd->cmd_status = 0x0;
|
|
dcmd->sge_count = 0;
|
|
dcmd->flags = cpu_to_le16(MFI_FRAME_DIR_NONE);
|
|
dcmd->timeout = 0;
|
|
dcmd->pad_0 = 0;
|
|
dcmd->data_xfer_len = 0;
|
|
dcmd->opcode = cpu_to_le32(opcode);
|
|
|
|
if (megasas_issue_blocked_cmd(instance, cmd, MFI_IO_TIMEOUT_SECS)
|
|
!= DCMD_SUCCESS) {
|
|
dev_err(&instance->pdev->dev,
|
|
"return from %s %d\n", __func__, __LINE__);
|
|
return;
|
|
}
|
|
|
|
megasas_return_cmd(instance, cmd);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
/**
|
|
* megasas_suspend - driver suspend entry point
|
|
* @pdev: PCI device structure
|
|
* @state: PCI power state to suspend routine
|
|
*/
|
|
static int
|
|
megasas_suspend(struct pci_dev *pdev, pm_message_t state)
|
|
{
|
|
struct Scsi_Host *host;
|
|
struct megasas_instance *instance;
|
|
|
|
instance = pci_get_drvdata(pdev);
|
|
host = instance->host;
|
|
instance->unload = 1;
|
|
|
|
/* Shutdown SR-IOV heartbeat timer */
|
|
if (instance->requestorId && !instance->skip_heartbeat_timer_del)
|
|
del_timer_sync(&instance->sriov_heartbeat_timer);
|
|
|
|
megasas_flush_cache(instance);
|
|
megasas_shutdown_controller(instance, MR_DCMD_HIBERNATE_SHUTDOWN);
|
|
|
|
/* cancel the delayed work if this work still in queue */
|
|
if (instance->ev != NULL) {
|
|
struct megasas_aen_event *ev = instance->ev;
|
|
cancel_delayed_work_sync(&ev->hotplug_work);
|
|
instance->ev = NULL;
|
|
}
|
|
|
|
tasklet_kill(&instance->isr_tasklet);
|
|
|
|
pci_set_drvdata(instance->pdev, instance);
|
|
instance->instancet->disable_intr(instance);
|
|
|
|
megasas_destroy_irqs(instance);
|
|
|
|
if (instance->msix_vectors)
|
|
pci_free_irq_vectors(instance->pdev);
|
|
|
|
pci_save_state(pdev);
|
|
pci_disable_device(pdev);
|
|
|
|
pci_set_power_state(pdev, pci_choose_state(pdev, state));
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* megasas_resume- driver resume entry point
|
|
* @pdev: PCI device structure
|
|
*/
|
|
static int
|
|
megasas_resume(struct pci_dev *pdev)
|
|
{
|
|
int rval;
|
|
struct Scsi_Host *host;
|
|
struct megasas_instance *instance;
|
|
int irq_flags = PCI_IRQ_LEGACY;
|
|
|
|
instance = pci_get_drvdata(pdev);
|
|
host = instance->host;
|
|
pci_set_power_state(pdev, PCI_D0);
|
|
pci_enable_wake(pdev, PCI_D0, 0);
|
|
pci_restore_state(pdev);
|
|
|
|
/*
|
|
* PCI prepping: enable device set bus mastering and dma mask
|
|
*/
|
|
rval = pci_enable_device_mem(pdev);
|
|
|
|
if (rval) {
|
|
dev_err(&pdev->dev, "Enable device failed\n");
|
|
return rval;
|
|
}
|
|
|
|
pci_set_master(pdev);
|
|
|
|
/*
|
|
* We expect the FW state to be READY
|
|
*/
|
|
if (megasas_transition_to_ready(instance, 0))
|
|
goto fail_ready_state;
|
|
|
|
if (megasas_set_dma_mask(instance))
|
|
goto fail_set_dma_mask;
|
|
|
|
/*
|
|
* Initialize MFI Firmware
|
|
*/
|
|
|
|
atomic_set(&instance->fw_outstanding, 0);
|
|
atomic_set(&instance->ldio_outstanding, 0);
|
|
|
|
/* Now re-enable MSI-X */
|
|
if (instance->msix_vectors) {
|
|
irq_flags = PCI_IRQ_MSIX;
|
|
if (smp_affinity_enable)
|
|
irq_flags |= PCI_IRQ_AFFINITY;
|
|
}
|
|
rval = pci_alloc_irq_vectors(instance->pdev, 1,
|
|
instance->msix_vectors ?
|
|
instance->msix_vectors : 1, irq_flags);
|
|
if (rval < 0)
|
|
goto fail_reenable_msix;
|
|
|
|
if (instance->adapter_type != MFI_SERIES) {
|
|
megasas_reset_reply_desc(instance);
|
|
if (megasas_ioc_init_fusion(instance)) {
|
|
megasas_free_cmds(instance);
|
|
megasas_free_cmds_fusion(instance);
|
|
goto fail_init_mfi;
|
|
}
|
|
if (!megasas_get_map_info(instance))
|
|
megasas_sync_map_info(instance);
|
|
} else {
|
|
*instance->producer = 0;
|
|
*instance->consumer = 0;
|
|
if (megasas_issue_init_mfi(instance))
|
|
goto fail_init_mfi;
|
|
}
|
|
|
|
tasklet_init(&instance->isr_tasklet, instance->instancet->tasklet,
|
|
(unsigned long)instance);
|
|
|
|
if (instance->msix_vectors ?
|
|
megasas_setup_irqs_msix(instance, 0) :
|
|
megasas_setup_irqs_ioapic(instance))
|
|
goto fail_init_mfi;
|
|
|
|
/* Re-launch SR-IOV heartbeat timer */
|
|
if (instance->requestorId) {
|
|
if (!megasas_sriov_start_heartbeat(instance, 0))
|
|
megasas_start_timer(instance);
|
|
else {
|
|
instance->skip_heartbeat_timer_del = 1;
|
|
goto fail_init_mfi;
|
|
}
|
|
}
|
|
|
|
instance->instancet->enable_intr(instance);
|
|
megasas_setup_jbod_map(instance);
|
|
instance->unload = 0;
|
|
|
|
/*
|
|
* Initiate AEN (Asynchronous Event Notification)
|
|
*/
|
|
if (megasas_start_aen(instance))
|
|
dev_err(&instance->pdev->dev, "Start AEN failed\n");
|
|
|
|
return 0;
|
|
|
|
fail_init_mfi:
|
|
megasas_free_ctrl_dma_buffers(instance);
|
|
megasas_free_ctrl_mem(instance);
|
|
scsi_host_put(host);
|
|
|
|
fail_reenable_msix:
|
|
fail_set_dma_mask:
|
|
fail_ready_state:
|
|
|
|
pci_disable_device(pdev);
|
|
|
|
return -ENODEV;
|
|
}
|
|
#else
|
|
#define megasas_suspend NULL
|
|
#define megasas_resume NULL
|
|
#endif
|
|
|
|
static inline int
|
|
megasas_wait_for_adapter_operational(struct megasas_instance *instance)
|
|
{
|
|
int wait_time = MEGASAS_RESET_WAIT_TIME * 2;
|
|
int i;
|
|
|
|
if (atomic_read(&instance->adprecovery) == MEGASAS_HW_CRITICAL_ERROR)
|
|
return 1;
|
|
|
|
for (i = 0; i < wait_time; i++) {
|
|
if (atomic_read(&instance->adprecovery) == MEGASAS_HBA_OPERATIONAL)
|
|
break;
|
|
|
|
if (!(i % MEGASAS_RESET_NOTICE_INTERVAL))
|
|
dev_notice(&instance->pdev->dev, "waiting for controller reset to finish\n");
|
|
|
|
msleep(1000);
|
|
}
|
|
|
|
if (atomic_read(&instance->adprecovery) != MEGASAS_HBA_OPERATIONAL) {
|
|
dev_info(&instance->pdev->dev, "%s timed out while waiting for HBA to recover.\n",
|
|
__func__);
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* megasas_detach_one - PCI hot"un"plug entry point
|
|
* @pdev: PCI device structure
|
|
*/
|
|
static void megasas_detach_one(struct pci_dev *pdev)
|
|
{
|
|
int i;
|
|
struct Scsi_Host *host;
|
|
struct megasas_instance *instance;
|
|
struct fusion_context *fusion;
|
|
u32 pd_seq_map_sz;
|
|
|
|
instance = pci_get_drvdata(pdev);
|
|
host = instance->host;
|
|
fusion = instance->ctrl_context;
|
|
|
|
/* Shutdown SR-IOV heartbeat timer */
|
|
if (instance->requestorId && !instance->skip_heartbeat_timer_del)
|
|
del_timer_sync(&instance->sriov_heartbeat_timer);
|
|
|
|
if (instance->fw_crash_state != UNAVAILABLE)
|
|
megasas_free_host_crash_buffer(instance);
|
|
scsi_remove_host(instance->host);
|
|
instance->unload = 1;
|
|
|
|
if (megasas_wait_for_adapter_operational(instance))
|
|
goto skip_firing_dcmds;
|
|
|
|
megasas_flush_cache(instance);
|
|
megasas_shutdown_controller(instance, MR_DCMD_CTRL_SHUTDOWN);
|
|
|
|
skip_firing_dcmds:
|
|
/* cancel the delayed work if this work still in queue*/
|
|
if (instance->ev != NULL) {
|
|
struct megasas_aen_event *ev = instance->ev;
|
|
cancel_delayed_work_sync(&ev->hotplug_work);
|
|
instance->ev = NULL;
|
|
}
|
|
|
|
/* cancel all wait events */
|
|
wake_up_all(&instance->int_cmd_wait_q);
|
|
|
|
tasklet_kill(&instance->isr_tasklet);
|
|
|
|
/*
|
|
* Take the instance off the instance array. Note that we will not
|
|
* decrement the max_index. We let this array be sparse array
|
|
*/
|
|
for (i = 0; i < megasas_mgmt_info.max_index; i++) {
|
|
if (megasas_mgmt_info.instance[i] == instance) {
|
|
megasas_mgmt_info.count--;
|
|
megasas_mgmt_info.instance[i] = NULL;
|
|
|
|
break;
|
|
}
|
|
}
|
|
|
|
instance->instancet->disable_intr(instance);
|
|
|
|
megasas_destroy_irqs(instance);
|
|
|
|
if (instance->msix_vectors)
|
|
pci_free_irq_vectors(instance->pdev);
|
|
|
|
if (instance->adapter_type == VENTURA_SERIES) {
|
|
for (i = 0; i < MAX_LOGICAL_DRIVES_EXT; ++i)
|
|
kfree(fusion->stream_detect_by_ld[i]);
|
|
kfree(fusion->stream_detect_by_ld);
|
|
fusion->stream_detect_by_ld = NULL;
|
|
}
|
|
|
|
|
|
if (instance->adapter_type != MFI_SERIES) {
|
|
megasas_release_fusion(instance);
|
|
pd_seq_map_sz = sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) +
|
|
(sizeof(struct MR_PD_CFG_SEQ) *
|
|
(MAX_PHYSICAL_DEVICES - 1));
|
|
for (i = 0; i < 2 ; i++) {
|
|
if (fusion->ld_map[i])
|
|
dma_free_coherent(&instance->pdev->dev,
|
|
fusion->max_map_sz,
|
|
fusion->ld_map[i],
|
|
fusion->ld_map_phys[i]);
|
|
if (fusion->ld_drv_map[i]) {
|
|
if (is_vmalloc_addr(fusion->ld_drv_map[i]))
|
|
vfree(fusion->ld_drv_map[i]);
|
|
else
|
|
free_pages((ulong)fusion->ld_drv_map[i],
|
|
fusion->drv_map_pages);
|
|
}
|
|
|
|
if (fusion->pd_seq_sync[i])
|
|
dma_free_coherent(&instance->pdev->dev,
|
|
pd_seq_map_sz,
|
|
fusion->pd_seq_sync[i],
|
|
fusion->pd_seq_phys[i]);
|
|
}
|
|
} else {
|
|
megasas_release_mfi(instance);
|
|
}
|
|
|
|
if (instance->vf_affiliation)
|
|
pci_free_consistent(pdev, (MAX_LOGICAL_DRIVES + 1) *
|
|
sizeof(struct MR_LD_VF_AFFILIATION),
|
|
instance->vf_affiliation,
|
|
instance->vf_affiliation_h);
|
|
|
|
if (instance->vf_affiliation_111)
|
|
pci_free_consistent(pdev,
|
|
sizeof(struct MR_LD_VF_AFFILIATION_111),
|
|
instance->vf_affiliation_111,
|
|
instance->vf_affiliation_111_h);
|
|
|
|
if (instance->hb_host_mem)
|
|
pci_free_consistent(pdev, sizeof(struct MR_CTRL_HB_HOST_MEM),
|
|
instance->hb_host_mem,
|
|
instance->hb_host_mem_h);
|
|
|
|
megasas_free_ctrl_dma_buffers(instance);
|
|
|
|
megasas_free_ctrl_mem(instance);
|
|
|
|
scsi_host_put(host);
|
|
|
|
pci_disable_device(pdev);
|
|
}
|
|
|
|
/**
|
|
* megasas_shutdown - Shutdown entry point
|
|
* @device: Generic device structure
|
|
*/
|
|
static void megasas_shutdown(struct pci_dev *pdev)
|
|
{
|
|
struct megasas_instance *instance = pci_get_drvdata(pdev);
|
|
|
|
instance->unload = 1;
|
|
|
|
if (megasas_wait_for_adapter_operational(instance))
|
|
goto skip_firing_dcmds;
|
|
|
|
megasas_flush_cache(instance);
|
|
megasas_shutdown_controller(instance, MR_DCMD_CTRL_SHUTDOWN);
|
|
|
|
skip_firing_dcmds:
|
|
instance->instancet->disable_intr(instance);
|
|
megasas_destroy_irqs(instance);
|
|
|
|
if (instance->msix_vectors)
|
|
pci_free_irq_vectors(instance->pdev);
|
|
}
|
|
|
|
/**
|
|
* megasas_mgmt_open - char node "open" entry point
|
|
*/
|
|
static int megasas_mgmt_open(struct inode *inode, struct file *filep)
|
|
{
|
|
/*
|
|
* Allow only those users with admin rights
|
|
*/
|
|
if (!capable(CAP_SYS_ADMIN))
|
|
return -EACCES;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* megasas_mgmt_fasync - Async notifier registration from applications
|
|
*
|
|
* This function adds the calling process to a driver global queue. When an
|
|
* event occurs, SIGIO will be sent to all processes in this queue.
|
|
*/
|
|
static int megasas_mgmt_fasync(int fd, struct file *filep, int mode)
|
|
{
|
|
int rc;
|
|
|
|
mutex_lock(&megasas_async_queue_mutex);
|
|
|
|
rc = fasync_helper(fd, filep, mode, &megasas_async_queue);
|
|
|
|
mutex_unlock(&megasas_async_queue_mutex);
|
|
|
|
if (rc >= 0) {
|
|
/* For sanity check when we get ioctl */
|
|
filep->private_data = filep;
|
|
return 0;
|
|
}
|
|
|
|
printk(KERN_DEBUG "megasas: fasync_helper failed [%d]\n", rc);
|
|
|
|
return rc;
|
|
}
|
|
|
|
/**
|
|
* megasas_mgmt_poll - char node "poll" entry point
|
|
* */
|
|
static unsigned int megasas_mgmt_poll(struct file *file, poll_table *wait)
|
|
{
|
|
unsigned int mask;
|
|
unsigned long flags;
|
|
|
|
poll_wait(file, &megasas_poll_wait, wait);
|
|
spin_lock_irqsave(&poll_aen_lock, flags);
|
|
if (megasas_poll_wait_aen)
|
|
mask = (POLLIN | POLLRDNORM);
|
|
else
|
|
mask = 0;
|
|
megasas_poll_wait_aen = 0;
|
|
spin_unlock_irqrestore(&poll_aen_lock, flags);
|
|
return mask;
|
|
}
|
|
|
|
/*
|
|
* megasas_set_crash_dump_params_ioctl:
|
|
* Send CRASH_DUMP_MODE DCMD to all controllers
|
|
* @cmd: MFI command frame
|
|
*/
|
|
|
|
static int megasas_set_crash_dump_params_ioctl(struct megasas_cmd *cmd)
|
|
{
|
|
struct megasas_instance *local_instance;
|
|
int i, error = 0;
|
|
int crash_support;
|
|
|
|
crash_support = cmd->frame->dcmd.mbox.w[0];
|
|
|
|
for (i = 0; i < megasas_mgmt_info.max_index; i++) {
|
|
local_instance = megasas_mgmt_info.instance[i];
|
|
if (local_instance && local_instance->crash_dump_drv_support) {
|
|
if ((atomic_read(&local_instance->adprecovery) ==
|
|
MEGASAS_HBA_OPERATIONAL) &&
|
|
!megasas_set_crash_dump_params(local_instance,
|
|
crash_support)) {
|
|
local_instance->crash_dump_app_support =
|
|
crash_support;
|
|
dev_info(&local_instance->pdev->dev,
|
|
"Application firmware crash "
|
|
"dump mode set success\n");
|
|
error = 0;
|
|
} else {
|
|
dev_info(&local_instance->pdev->dev,
|
|
"Application firmware crash "
|
|
"dump mode set failed\n");
|
|
error = -1;
|
|
}
|
|
}
|
|
}
|
|
return error;
|
|
}
|
|
|
|
/**
|
|
* megasas_mgmt_fw_ioctl - Issues management ioctls to FW
|
|
* @instance: Adapter soft state
|
|
* @argp: User's ioctl packet
|
|
*/
|
|
static int
|
|
megasas_mgmt_fw_ioctl(struct megasas_instance *instance,
|
|
struct megasas_iocpacket __user * user_ioc,
|
|
struct megasas_iocpacket *ioc)
|
|
{
|
|
struct megasas_sge64 *kern_sge64 = NULL;
|
|
struct megasas_sge32 *kern_sge32 = NULL;
|
|
struct megasas_cmd *cmd;
|
|
void *kbuff_arr[MAX_IOCTL_SGE];
|
|
dma_addr_t buf_handle = 0;
|
|
int error = 0, i;
|
|
void *sense = NULL;
|
|
dma_addr_t sense_handle;
|
|
unsigned long *sense_ptr;
|
|
u32 opcode = 0;
|
|
|
|
memset(kbuff_arr, 0, sizeof(kbuff_arr));
|
|
|
|
if (ioc->sge_count > MAX_IOCTL_SGE) {
|
|
dev_printk(KERN_DEBUG, &instance->pdev->dev, "SGE count [%d] > max limit [%d]\n",
|
|
ioc->sge_count, MAX_IOCTL_SGE);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (ioc->frame.hdr.cmd >= MFI_CMD_OP_COUNT) {
|
|
dev_err(&instance->pdev->dev,
|
|
"Received invalid ioctl command 0x%x\n",
|
|
ioc->frame.hdr.cmd);
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
cmd = megasas_get_cmd(instance);
|
|
if (!cmd) {
|
|
dev_printk(KERN_DEBUG, &instance->pdev->dev, "Failed to get a cmd packet\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/*
|
|
* User's IOCTL packet has 2 frames (maximum). Copy those two
|
|
* frames into our cmd's frames. cmd->frame's context will get
|
|
* overwritten when we copy from user's frames. So set that value
|
|
* alone separately
|
|
*/
|
|
memcpy(cmd->frame, ioc->frame.raw, 2 * MEGAMFI_FRAME_SIZE);
|
|
cmd->frame->hdr.context = cpu_to_le32(cmd->index);
|
|
cmd->frame->hdr.pad_0 = 0;
|
|
|
|
cmd->frame->hdr.flags &= (~MFI_FRAME_IEEE);
|
|
|
|
if (instance->consistent_mask_64bit)
|
|
cmd->frame->hdr.flags |= cpu_to_le16((MFI_FRAME_SGL64 |
|
|
MFI_FRAME_SENSE64));
|
|
else
|
|
cmd->frame->hdr.flags &= cpu_to_le16(~(MFI_FRAME_SGL64 |
|
|
MFI_FRAME_SENSE64));
|
|
|
|
if (cmd->frame->hdr.cmd == MFI_CMD_DCMD)
|
|
opcode = le32_to_cpu(cmd->frame->dcmd.opcode);
|
|
|
|
if (opcode == MR_DCMD_CTRL_SHUTDOWN) {
|
|
if (megasas_get_ctrl_info(instance) != DCMD_SUCCESS) {
|
|
megasas_return_cmd(instance, cmd);
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
if (opcode == MR_DRIVER_SET_APP_CRASHDUMP_MODE) {
|
|
error = megasas_set_crash_dump_params_ioctl(cmd);
|
|
megasas_return_cmd(instance, cmd);
|
|
return error;
|
|
}
|
|
|
|
/*
|
|
* The management interface between applications and the fw uses
|
|
* MFI frames. E.g, RAID configuration changes, LD property changes
|
|
* etc are accomplishes through different kinds of MFI frames. The
|
|
* driver needs to care only about substituting user buffers with
|
|
* kernel buffers in SGLs. The location of SGL is embedded in the
|
|
* struct iocpacket itself.
|
|
*/
|
|
if (instance->consistent_mask_64bit)
|
|
kern_sge64 = (struct megasas_sge64 *)
|
|
((unsigned long)cmd->frame + ioc->sgl_off);
|
|
else
|
|
kern_sge32 = (struct megasas_sge32 *)
|
|
((unsigned long)cmd->frame + ioc->sgl_off);
|
|
|
|
/*
|
|
* For each user buffer, create a mirror buffer and copy in
|
|
*/
|
|
for (i = 0; i < ioc->sge_count; i++) {
|
|
if (!ioc->sgl[i].iov_len)
|
|
continue;
|
|
|
|
kbuff_arr[i] = dma_alloc_coherent(&instance->pdev->dev,
|
|
ioc->sgl[i].iov_len,
|
|
&buf_handle, GFP_KERNEL);
|
|
if (!kbuff_arr[i]) {
|
|
dev_printk(KERN_DEBUG, &instance->pdev->dev, "Failed to alloc "
|
|
"kernel SGL buffer for IOCTL\n");
|
|
error = -ENOMEM;
|
|
goto out;
|
|
}
|
|
|
|
/*
|
|
* We don't change the dma_coherent_mask, so
|
|
* pci_alloc_consistent only returns 32bit addresses
|
|
*/
|
|
if (instance->consistent_mask_64bit) {
|
|
kern_sge64[i].phys_addr = cpu_to_le64(buf_handle);
|
|
kern_sge64[i].length = cpu_to_le32(ioc->sgl[i].iov_len);
|
|
} else {
|
|
kern_sge32[i].phys_addr = cpu_to_le32(buf_handle);
|
|
kern_sge32[i].length = cpu_to_le32(ioc->sgl[i].iov_len);
|
|
}
|
|
|
|
/*
|
|
* We created a kernel buffer corresponding to the
|
|
* user buffer. Now copy in from the user buffer
|
|
*/
|
|
if (copy_from_user(kbuff_arr[i], ioc->sgl[i].iov_base,
|
|
(u32) (ioc->sgl[i].iov_len))) {
|
|
error = -EFAULT;
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
if (ioc->sense_len) {
|
|
sense = dma_alloc_coherent(&instance->pdev->dev, ioc->sense_len,
|
|
&sense_handle, GFP_KERNEL);
|
|
if (!sense) {
|
|
error = -ENOMEM;
|
|
goto out;
|
|
}
|
|
|
|
sense_ptr =
|
|
(unsigned long *) ((unsigned long)cmd->frame + ioc->sense_off);
|
|
if (instance->consistent_mask_64bit)
|
|
*sense_ptr = cpu_to_le64(sense_handle);
|
|
else
|
|
*sense_ptr = cpu_to_le32(sense_handle);
|
|
}
|
|
|
|
/*
|
|
* Set the sync_cmd flag so that the ISR knows not to complete this
|
|
* cmd to the SCSI mid-layer
|
|
*/
|
|
cmd->sync_cmd = 1;
|
|
if (megasas_issue_blocked_cmd(instance, cmd, 0) == DCMD_NOT_FIRED) {
|
|
cmd->sync_cmd = 0;
|
|
dev_err(&instance->pdev->dev,
|
|
"return -EBUSY from %s %d cmd 0x%x opcode 0x%x cmd->cmd_status_drv 0x%x\n",
|
|
__func__, __LINE__, cmd->frame->hdr.cmd, opcode,
|
|
cmd->cmd_status_drv);
|
|
return -EBUSY;
|
|
}
|
|
|
|
cmd->sync_cmd = 0;
|
|
|
|
if (instance->unload == 1) {
|
|
dev_info(&instance->pdev->dev, "Driver unload is in progress "
|
|
"don't submit data to application\n");
|
|
goto out;
|
|
}
|
|
/*
|
|
* copy out the kernel buffers to user buffers
|
|
*/
|
|
for (i = 0; i < ioc->sge_count; i++) {
|
|
if (copy_to_user(ioc->sgl[i].iov_base, kbuff_arr[i],
|
|
ioc->sgl[i].iov_len)) {
|
|
error = -EFAULT;
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* copy out the sense
|
|
*/
|
|
if (ioc->sense_len) {
|
|
/*
|
|
* sense_ptr points to the location that has the user
|
|
* sense buffer address
|
|
*/
|
|
sense_ptr = (unsigned long *) ((unsigned long)ioc->frame.raw +
|
|
ioc->sense_off);
|
|
|
|
if (copy_to_user((void __user *)((unsigned long)
|
|
get_unaligned((unsigned long *)sense_ptr)),
|
|
sense, ioc->sense_len)) {
|
|
dev_err(&instance->pdev->dev, "Failed to copy out to user "
|
|
"sense data\n");
|
|
error = -EFAULT;
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* copy the status codes returned by the fw
|
|
*/
|
|
if (copy_to_user(&user_ioc->frame.hdr.cmd_status,
|
|
&cmd->frame->hdr.cmd_status, sizeof(u8))) {
|
|
dev_printk(KERN_DEBUG, &instance->pdev->dev, "Error copying out cmd_status\n");
|
|
error = -EFAULT;
|
|
}
|
|
|
|
out:
|
|
if (sense) {
|
|
dma_free_coherent(&instance->pdev->dev, ioc->sense_len,
|
|
sense, sense_handle);
|
|
}
|
|
|
|
for (i = 0; i < ioc->sge_count; i++) {
|
|
if (kbuff_arr[i]) {
|
|
if (instance->consistent_mask_64bit)
|
|
dma_free_coherent(&instance->pdev->dev,
|
|
le32_to_cpu(kern_sge64[i].length),
|
|
kbuff_arr[i],
|
|
le64_to_cpu(kern_sge64[i].phys_addr));
|
|
else
|
|
dma_free_coherent(&instance->pdev->dev,
|
|
le32_to_cpu(kern_sge32[i].length),
|
|
kbuff_arr[i],
|
|
le32_to_cpu(kern_sge32[i].phys_addr));
|
|
kbuff_arr[i] = NULL;
|
|
}
|
|
}
|
|
|
|
megasas_return_cmd(instance, cmd);
|
|
return error;
|
|
}
|
|
|
|
static int megasas_mgmt_ioctl_fw(struct file *file, unsigned long arg)
|
|
{
|
|
struct megasas_iocpacket __user *user_ioc =
|
|
(struct megasas_iocpacket __user *)arg;
|
|
struct megasas_iocpacket *ioc;
|
|
struct megasas_instance *instance;
|
|
int error;
|
|
int i;
|
|
unsigned long flags;
|
|
u32 wait_time = MEGASAS_RESET_WAIT_TIME;
|
|
|
|
ioc = memdup_user(user_ioc, sizeof(*ioc));
|
|
if (IS_ERR(ioc))
|
|
return PTR_ERR(ioc);
|
|
|
|
instance = megasas_lookup_instance(ioc->host_no);
|
|
if (!instance) {
|
|
error = -ENODEV;
|
|
goto out_kfree_ioc;
|
|
}
|
|
|
|
/* Adjust ioctl wait time for VF mode */
|
|
if (instance->requestorId)
|
|
wait_time = MEGASAS_ROUTINE_WAIT_TIME_VF;
|
|
|
|
/* Block ioctls in VF mode */
|
|
if (instance->requestorId && !allow_vf_ioctls) {
|
|
error = -ENODEV;
|
|
goto out_kfree_ioc;
|
|
}
|
|
|
|
if (atomic_read(&instance->adprecovery) == MEGASAS_HW_CRITICAL_ERROR) {
|
|
dev_err(&instance->pdev->dev, "Controller in crit error\n");
|
|
error = -ENODEV;
|
|
goto out_kfree_ioc;
|
|
}
|
|
|
|
if (instance->unload == 1) {
|
|
error = -ENODEV;
|
|
goto out_kfree_ioc;
|
|
}
|
|
|
|
if (down_interruptible(&instance->ioctl_sem)) {
|
|
error = -ERESTARTSYS;
|
|
goto out_kfree_ioc;
|
|
}
|
|
|
|
for (i = 0; i < wait_time; i++) {
|
|
|
|
spin_lock_irqsave(&instance->hba_lock, flags);
|
|
if (atomic_read(&instance->adprecovery) == MEGASAS_HBA_OPERATIONAL) {
|
|
spin_unlock_irqrestore(&instance->hba_lock, flags);
|
|
break;
|
|
}
|
|
spin_unlock_irqrestore(&instance->hba_lock, flags);
|
|
|
|
if (!(i % MEGASAS_RESET_NOTICE_INTERVAL)) {
|
|
dev_notice(&instance->pdev->dev, "waiting"
|
|
"for controller reset to finish\n");
|
|
}
|
|
|
|
msleep(1000);
|
|
}
|
|
|
|
spin_lock_irqsave(&instance->hba_lock, flags);
|
|
if (atomic_read(&instance->adprecovery) != MEGASAS_HBA_OPERATIONAL) {
|
|
spin_unlock_irqrestore(&instance->hba_lock, flags);
|
|
|
|
dev_err(&instance->pdev->dev, "timed out while waiting for HBA to recover\n");
|
|
error = -ENODEV;
|
|
goto out_up;
|
|
}
|
|
spin_unlock_irqrestore(&instance->hba_lock, flags);
|
|
|
|
error = megasas_mgmt_fw_ioctl(instance, user_ioc, ioc);
|
|
out_up:
|
|
up(&instance->ioctl_sem);
|
|
|
|
out_kfree_ioc:
|
|
kfree(ioc);
|
|
return error;
|
|
}
|
|
|
|
static int megasas_mgmt_ioctl_aen(struct file *file, unsigned long arg)
|
|
{
|
|
struct megasas_instance *instance;
|
|
struct megasas_aen aen;
|
|
int error;
|
|
int i;
|
|
unsigned long flags;
|
|
u32 wait_time = MEGASAS_RESET_WAIT_TIME;
|
|
|
|
if (file->private_data != file) {
|
|
printk(KERN_DEBUG "megasas: fasync_helper was not "
|
|
"called first\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (copy_from_user(&aen, (void __user *)arg, sizeof(aen)))
|
|
return -EFAULT;
|
|
|
|
instance = megasas_lookup_instance(aen.host_no);
|
|
|
|
if (!instance)
|
|
return -ENODEV;
|
|
|
|
if (atomic_read(&instance->adprecovery) == MEGASAS_HW_CRITICAL_ERROR) {
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (instance->unload == 1) {
|
|
return -ENODEV;
|
|
}
|
|
|
|
for (i = 0; i < wait_time; i++) {
|
|
|
|
spin_lock_irqsave(&instance->hba_lock, flags);
|
|
if (atomic_read(&instance->adprecovery) == MEGASAS_HBA_OPERATIONAL) {
|
|
spin_unlock_irqrestore(&instance->hba_lock,
|
|
flags);
|
|
break;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&instance->hba_lock, flags);
|
|
|
|
if (!(i % MEGASAS_RESET_NOTICE_INTERVAL)) {
|
|
dev_notice(&instance->pdev->dev, "waiting for"
|
|
"controller reset to finish\n");
|
|
}
|
|
|
|
msleep(1000);
|
|
}
|
|
|
|
spin_lock_irqsave(&instance->hba_lock, flags);
|
|
if (atomic_read(&instance->adprecovery) != MEGASAS_HBA_OPERATIONAL) {
|
|
spin_unlock_irqrestore(&instance->hba_lock, flags);
|
|
dev_err(&instance->pdev->dev, "timed out while waiting for HBA to recover\n");
|
|
return -ENODEV;
|
|
}
|
|
spin_unlock_irqrestore(&instance->hba_lock, flags);
|
|
|
|
mutex_lock(&instance->reset_mutex);
|
|
error = megasas_register_aen(instance, aen.seq_num,
|
|
aen.class_locale_word);
|
|
mutex_unlock(&instance->reset_mutex);
|
|
return error;
|
|
}
|
|
|
|
/**
|
|
* megasas_mgmt_ioctl - char node ioctl entry point
|
|
*/
|
|
static long
|
|
megasas_mgmt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
|
|
{
|
|
switch (cmd) {
|
|
case MEGASAS_IOC_FIRMWARE:
|
|
return megasas_mgmt_ioctl_fw(file, arg);
|
|
|
|
case MEGASAS_IOC_GET_AEN:
|
|
return megasas_mgmt_ioctl_aen(file, arg);
|
|
}
|
|
|
|
return -ENOTTY;
|
|
}
|
|
|
|
#ifdef CONFIG_COMPAT
|
|
static int megasas_mgmt_compat_ioctl_fw(struct file *file, unsigned long arg)
|
|
{
|
|
struct compat_megasas_iocpacket __user *cioc =
|
|
(struct compat_megasas_iocpacket __user *)arg;
|
|
struct megasas_iocpacket __user *ioc =
|
|
compat_alloc_user_space(sizeof(struct megasas_iocpacket));
|
|
int i;
|
|
int error = 0;
|
|
compat_uptr_t ptr;
|
|
u32 local_sense_off;
|
|
u32 local_sense_len;
|
|
u32 user_sense_off;
|
|
|
|
if (clear_user(ioc, sizeof(*ioc)))
|
|
return -EFAULT;
|
|
|
|
if (copy_in_user(&ioc->host_no, &cioc->host_no, sizeof(u16)) ||
|
|
copy_in_user(&ioc->sgl_off, &cioc->sgl_off, sizeof(u32)) ||
|
|
copy_in_user(&ioc->sense_off, &cioc->sense_off, sizeof(u32)) ||
|
|
copy_in_user(&ioc->sense_len, &cioc->sense_len, sizeof(u32)) ||
|
|
copy_in_user(ioc->frame.raw, cioc->frame.raw, 128) ||
|
|
copy_in_user(&ioc->sge_count, &cioc->sge_count, sizeof(u32)))
|
|
return -EFAULT;
|
|
|
|
/*
|
|
* The sense_ptr is used in megasas_mgmt_fw_ioctl only when
|
|
* sense_len is not null, so prepare the 64bit value under
|
|
* the same condition.
|
|
*/
|
|
if (get_user(local_sense_off, &ioc->sense_off) ||
|
|
get_user(local_sense_len, &ioc->sense_len) ||
|
|
get_user(user_sense_off, &cioc->sense_off))
|
|
return -EFAULT;
|
|
|
|
if (local_sense_len) {
|
|
void __user **sense_ioc_ptr =
|
|
(void __user **)((u8 *)((unsigned long)&ioc->frame.raw) + local_sense_off);
|
|
compat_uptr_t *sense_cioc_ptr =
|
|
(compat_uptr_t *)(((unsigned long)&cioc->frame.raw) + user_sense_off);
|
|
if (get_user(ptr, sense_cioc_ptr) ||
|
|
put_user(compat_ptr(ptr), sense_ioc_ptr))
|
|
return -EFAULT;
|
|
}
|
|
|
|
for (i = 0; i < MAX_IOCTL_SGE; i++) {
|
|
if (get_user(ptr, &cioc->sgl[i].iov_base) ||
|
|
put_user(compat_ptr(ptr), &ioc->sgl[i].iov_base) ||
|
|
copy_in_user(&ioc->sgl[i].iov_len,
|
|
&cioc->sgl[i].iov_len, sizeof(compat_size_t)))
|
|
return -EFAULT;
|
|
}
|
|
|
|
error = megasas_mgmt_ioctl_fw(file, (unsigned long)ioc);
|
|
|
|
if (copy_in_user(&cioc->frame.hdr.cmd_status,
|
|
&ioc->frame.hdr.cmd_status, sizeof(u8))) {
|
|
printk(KERN_DEBUG "megasas: error copy_in_user cmd_status\n");
|
|
return -EFAULT;
|
|
}
|
|
return error;
|
|
}
|
|
|
|
static long
|
|
megasas_mgmt_compat_ioctl(struct file *file, unsigned int cmd,
|
|
unsigned long arg)
|
|
{
|
|
switch (cmd) {
|
|
case MEGASAS_IOC_FIRMWARE32:
|
|
return megasas_mgmt_compat_ioctl_fw(file, arg);
|
|
case MEGASAS_IOC_GET_AEN:
|
|
return megasas_mgmt_ioctl_aen(file, arg);
|
|
}
|
|
|
|
return -ENOTTY;
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* File operations structure for management interface
|
|
*/
|
|
static const struct file_operations megasas_mgmt_fops = {
|
|
.owner = THIS_MODULE,
|
|
.open = megasas_mgmt_open,
|
|
.fasync = megasas_mgmt_fasync,
|
|
.unlocked_ioctl = megasas_mgmt_ioctl,
|
|
.poll = megasas_mgmt_poll,
|
|
#ifdef CONFIG_COMPAT
|
|
.compat_ioctl = megasas_mgmt_compat_ioctl,
|
|
#endif
|
|
.llseek = noop_llseek,
|
|
};
|
|
|
|
/*
|
|
* PCI hotplug support registration structure
|
|
*/
|
|
static struct pci_driver megasas_pci_driver = {
|
|
|
|
.name = "megaraid_sas",
|
|
.id_table = megasas_pci_table,
|
|
.probe = megasas_probe_one,
|
|
.remove = megasas_detach_one,
|
|
.suspend = megasas_suspend,
|
|
.resume = megasas_resume,
|
|
.shutdown = megasas_shutdown,
|
|
};
|
|
|
|
/*
|
|
* Sysfs driver attributes
|
|
*/
|
|
static ssize_t version_show(struct device_driver *dd, char *buf)
|
|
{
|
|
return snprintf(buf, strlen(MEGASAS_VERSION) + 2, "%s\n",
|
|
MEGASAS_VERSION);
|
|
}
|
|
static DRIVER_ATTR_RO(version);
|
|
|
|
static ssize_t release_date_show(struct device_driver *dd, char *buf)
|
|
{
|
|
return snprintf(buf, strlen(MEGASAS_RELDATE) + 2, "%s\n",
|
|
MEGASAS_RELDATE);
|
|
}
|
|
static DRIVER_ATTR_RO(release_date);
|
|
|
|
static ssize_t support_poll_for_event_show(struct device_driver *dd, char *buf)
|
|
{
|
|
return sprintf(buf, "%u\n", support_poll_for_event);
|
|
}
|
|
static DRIVER_ATTR_RO(support_poll_for_event);
|
|
|
|
static ssize_t support_device_change_show(struct device_driver *dd, char *buf)
|
|
{
|
|
return sprintf(buf, "%u\n", support_device_change);
|
|
}
|
|
static DRIVER_ATTR_RO(support_device_change);
|
|
|
|
static ssize_t dbg_lvl_show(struct device_driver *dd, char *buf)
|
|
{
|
|
return sprintf(buf, "%u\n", megasas_dbg_lvl);
|
|
}
|
|
|
|
static ssize_t dbg_lvl_store(struct device_driver *dd, const char *buf,
|
|
size_t count)
|
|
{
|
|
int retval = count;
|
|
|
|
if (sscanf(buf, "%u", &megasas_dbg_lvl) < 1) {
|
|
printk(KERN_ERR "megasas: could not set dbg_lvl\n");
|
|
retval = -EINVAL;
|
|
}
|
|
return retval;
|
|
}
|
|
static DRIVER_ATTR_RW(dbg_lvl);
|
|
|
|
static inline void megasas_remove_scsi_device(struct scsi_device *sdev)
|
|
{
|
|
sdev_printk(KERN_INFO, sdev, "SCSI device is removed\n");
|
|
scsi_remove_device(sdev);
|
|
scsi_device_put(sdev);
|
|
}
|
|
|
|
static void
|
|
megasas_aen_polling(struct work_struct *work)
|
|
{
|
|
struct megasas_aen_event *ev =
|
|
container_of(work, struct megasas_aen_event, hotplug_work.work);
|
|
struct megasas_instance *instance = ev->instance;
|
|
union megasas_evt_class_locale class_locale;
|
|
struct Scsi_Host *host;
|
|
struct scsi_device *sdev1;
|
|
u16 pd_index = 0;
|
|
u16 ld_index = 0;
|
|
int i, j, doscan = 0;
|
|
u32 seq_num, wait_time = MEGASAS_RESET_WAIT_TIME;
|
|
int error;
|
|
u8 dcmd_ret = DCMD_SUCCESS;
|
|
|
|
if (!instance) {
|
|
printk(KERN_ERR "invalid instance!\n");
|
|
kfree(ev);
|
|
return;
|
|
}
|
|
|
|
/* Adjust event workqueue thread wait time for VF mode */
|
|
if (instance->requestorId)
|
|
wait_time = MEGASAS_ROUTINE_WAIT_TIME_VF;
|
|
|
|
/* Don't run the event workqueue thread if OCR is running */
|
|
mutex_lock(&instance->reset_mutex);
|
|
|
|
instance->ev = NULL;
|
|
host = instance->host;
|
|
if (instance->evt_detail) {
|
|
megasas_decode_evt(instance);
|
|
|
|
switch (le32_to_cpu(instance->evt_detail->code)) {
|
|
|
|
case MR_EVT_PD_INSERTED:
|
|
case MR_EVT_PD_REMOVED:
|
|
dcmd_ret = megasas_get_pd_list(instance);
|
|
if (dcmd_ret == DCMD_SUCCESS)
|
|
doscan = SCAN_PD_CHANNEL;
|
|
break;
|
|
|
|
case MR_EVT_LD_OFFLINE:
|
|
case MR_EVT_CFG_CLEARED:
|
|
case MR_EVT_LD_DELETED:
|
|
case MR_EVT_LD_CREATED:
|
|
if (!instance->requestorId ||
|
|
(instance->requestorId && megasas_get_ld_vf_affiliation(instance, 0)))
|
|
dcmd_ret = megasas_ld_list_query(instance, MR_LD_QUERY_TYPE_EXPOSED_TO_HOST);
|
|
|
|
if (dcmd_ret == DCMD_SUCCESS)
|
|
doscan = SCAN_VD_CHANNEL;
|
|
|
|
break;
|
|
|
|
case MR_EVT_CTRL_HOST_BUS_SCAN_REQUESTED:
|
|
case MR_EVT_FOREIGN_CFG_IMPORTED:
|
|
case MR_EVT_LD_STATE_CHANGE:
|
|
dcmd_ret = megasas_get_pd_list(instance);
|
|
|
|
if (dcmd_ret != DCMD_SUCCESS)
|
|
break;
|
|
|
|
if (!instance->requestorId ||
|
|
(instance->requestorId && megasas_get_ld_vf_affiliation(instance, 0)))
|
|
dcmd_ret = megasas_ld_list_query(instance, MR_LD_QUERY_TYPE_EXPOSED_TO_HOST);
|
|
|
|
if (dcmd_ret != DCMD_SUCCESS)
|
|
break;
|
|
|
|
doscan = SCAN_VD_CHANNEL | SCAN_PD_CHANNEL;
|
|
dev_info(&instance->pdev->dev, "scanning for scsi%d...\n",
|
|
instance->host->host_no);
|
|
break;
|
|
|
|
case MR_EVT_CTRL_PROP_CHANGED:
|
|
dcmd_ret = megasas_get_ctrl_info(instance);
|
|
break;
|
|
default:
|
|
doscan = 0;
|
|
break;
|
|
}
|
|
} else {
|
|
dev_err(&instance->pdev->dev, "invalid evt_detail!\n");
|
|
mutex_unlock(&instance->reset_mutex);
|
|
kfree(ev);
|
|
return;
|
|
}
|
|
|
|
mutex_unlock(&instance->reset_mutex);
|
|
|
|
if (doscan & SCAN_PD_CHANNEL) {
|
|
for (i = 0; i < MEGASAS_MAX_PD_CHANNELS; i++) {
|
|
for (j = 0; j < MEGASAS_MAX_DEV_PER_CHANNEL; j++) {
|
|
pd_index = i*MEGASAS_MAX_DEV_PER_CHANNEL + j;
|
|
sdev1 = scsi_device_lookup(host, i, j, 0);
|
|
if (instance->pd_list[pd_index].driveState ==
|
|
MR_PD_STATE_SYSTEM) {
|
|
if (!sdev1)
|
|
scsi_add_device(host, i, j, 0);
|
|
else
|
|
scsi_device_put(sdev1);
|
|
} else {
|
|
if (sdev1)
|
|
megasas_remove_scsi_device(sdev1);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
if (doscan & SCAN_VD_CHANNEL) {
|
|
for (i = 0; i < MEGASAS_MAX_LD_CHANNELS; i++) {
|
|
for (j = 0; j < MEGASAS_MAX_DEV_PER_CHANNEL; j++) {
|
|
ld_index = (i * MEGASAS_MAX_DEV_PER_CHANNEL) + j;
|
|
sdev1 = scsi_device_lookup(host, MEGASAS_MAX_PD_CHANNELS + i, j, 0);
|
|
if (instance->ld_ids[ld_index] != 0xff) {
|
|
if (!sdev1)
|
|
scsi_add_device(host, MEGASAS_MAX_PD_CHANNELS + i, j, 0);
|
|
else
|
|
scsi_device_put(sdev1);
|
|
} else {
|
|
if (sdev1)
|
|
megasas_remove_scsi_device(sdev1);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
if (dcmd_ret == DCMD_SUCCESS)
|
|
seq_num = le32_to_cpu(instance->evt_detail->seq_num) + 1;
|
|
else
|
|
seq_num = instance->last_seq_num;
|
|
|
|
/* Register AEN with FW for latest sequence number plus 1 */
|
|
class_locale.members.reserved = 0;
|
|
class_locale.members.locale = MR_EVT_LOCALE_ALL;
|
|
class_locale.members.class = MR_EVT_CLASS_DEBUG;
|
|
|
|
if (instance->aen_cmd != NULL) {
|
|
kfree(ev);
|
|
return;
|
|
}
|
|
|
|
mutex_lock(&instance->reset_mutex);
|
|
error = megasas_register_aen(instance, seq_num,
|
|
class_locale.word);
|
|
if (error)
|
|
dev_err(&instance->pdev->dev,
|
|
"register aen failed error %x\n", error);
|
|
|
|
mutex_unlock(&instance->reset_mutex);
|
|
kfree(ev);
|
|
}
|
|
|
|
/**
|
|
* megasas_init - Driver load entry point
|
|
*/
|
|
static int __init megasas_init(void)
|
|
{
|
|
int rval;
|
|
|
|
/*
|
|
* Booted in kdump kernel, minimize memory footprints by
|
|
* disabling few features
|
|
*/
|
|
if (reset_devices) {
|
|
msix_vectors = 1;
|
|
rdpq_enable = 0;
|
|
dual_qdepth_disable = 1;
|
|
}
|
|
|
|
/*
|
|
* Announce driver version and other information
|
|
*/
|
|
pr_info("megasas: %s\n", MEGASAS_VERSION);
|
|
|
|
spin_lock_init(&poll_aen_lock);
|
|
|
|
support_poll_for_event = 2;
|
|
support_device_change = 1;
|
|
|
|
memset(&megasas_mgmt_info, 0, sizeof(megasas_mgmt_info));
|
|
|
|
/*
|
|
* Register character device node
|
|
*/
|
|
rval = register_chrdev(0, "megaraid_sas_ioctl", &megasas_mgmt_fops);
|
|
|
|
if (rval < 0) {
|
|
printk(KERN_DEBUG "megasas: failed to open device node\n");
|
|
return rval;
|
|
}
|
|
|
|
megasas_mgmt_majorno = rval;
|
|
|
|
/*
|
|
* Register ourselves as PCI hotplug module
|
|
*/
|
|
rval = pci_register_driver(&megasas_pci_driver);
|
|
|
|
if (rval) {
|
|
printk(KERN_DEBUG "megasas: PCI hotplug registration failed \n");
|
|
goto err_pcidrv;
|
|
}
|
|
|
|
rval = driver_create_file(&megasas_pci_driver.driver,
|
|
&driver_attr_version);
|
|
if (rval)
|
|
goto err_dcf_attr_ver;
|
|
|
|
rval = driver_create_file(&megasas_pci_driver.driver,
|
|
&driver_attr_release_date);
|
|
if (rval)
|
|
goto err_dcf_rel_date;
|
|
|
|
rval = driver_create_file(&megasas_pci_driver.driver,
|
|
&driver_attr_support_poll_for_event);
|
|
if (rval)
|
|
goto err_dcf_support_poll_for_event;
|
|
|
|
rval = driver_create_file(&megasas_pci_driver.driver,
|
|
&driver_attr_dbg_lvl);
|
|
if (rval)
|
|
goto err_dcf_dbg_lvl;
|
|
rval = driver_create_file(&megasas_pci_driver.driver,
|
|
&driver_attr_support_device_change);
|
|
if (rval)
|
|
goto err_dcf_support_device_change;
|
|
|
|
return rval;
|
|
|
|
err_dcf_support_device_change:
|
|
driver_remove_file(&megasas_pci_driver.driver,
|
|
&driver_attr_dbg_lvl);
|
|
err_dcf_dbg_lvl:
|
|
driver_remove_file(&megasas_pci_driver.driver,
|
|
&driver_attr_support_poll_for_event);
|
|
err_dcf_support_poll_for_event:
|
|
driver_remove_file(&megasas_pci_driver.driver,
|
|
&driver_attr_release_date);
|
|
err_dcf_rel_date:
|
|
driver_remove_file(&megasas_pci_driver.driver, &driver_attr_version);
|
|
err_dcf_attr_ver:
|
|
pci_unregister_driver(&megasas_pci_driver);
|
|
err_pcidrv:
|
|
unregister_chrdev(megasas_mgmt_majorno, "megaraid_sas_ioctl");
|
|
return rval;
|
|
}
|
|
|
|
/**
|
|
* megasas_exit - Driver unload entry point
|
|
*/
|
|
static void __exit megasas_exit(void)
|
|
{
|
|
driver_remove_file(&megasas_pci_driver.driver,
|
|
&driver_attr_dbg_lvl);
|
|
driver_remove_file(&megasas_pci_driver.driver,
|
|
&driver_attr_support_poll_for_event);
|
|
driver_remove_file(&megasas_pci_driver.driver,
|
|
&driver_attr_support_device_change);
|
|
driver_remove_file(&megasas_pci_driver.driver,
|
|
&driver_attr_release_date);
|
|
driver_remove_file(&megasas_pci_driver.driver, &driver_attr_version);
|
|
|
|
pci_unregister_driver(&megasas_pci_driver);
|
|
unregister_chrdev(megasas_mgmt_majorno, "megaraid_sas_ioctl");
|
|
}
|
|
|
|
module_init(megasas_init);
|
|
module_exit(megasas_exit);
|