korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-16 16:54:20 +08:00
Code Issues Packages Projects Releases Wiki Activity
140fedb5f2
linux/drivers/net/wan/n2.c
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2 
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

563 lines
13 KiB
C
Raw Blame History

/*
* SDL Inc. RISCom/N2 synchronous serial card driver for Linux
*
* Copyright (C) 1998-2003 Krzysztof Halasa <khc@pm.waw.pl>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License
* as published by the Free Software Foundation.
*
* For information see http://hq.pm.waw.pl/hdlc/
*
* Note: integrated CSU/DSU/DDS are not supported by this driver
*
* Sources of information:
* Hitachi HD64570 SCA User's Manual
* SDL Inc. PPP/HDLC/CISCO driver
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/fcntl.h>
#include <linux/in.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/moduleparam.h>
#include <linux/netdevice.h>
#include <linux/hdlc.h>
#include <asm/io.h>
#include "hd64570.h"
static const char* version = "SDL RISCom/N2 driver version: 1.15";
static const char* devname = "RISCom/N2";
#undef DEBUG_PKT
#define DEBUG_RINGS
#define USE_WINDOWSIZE 16384
#define USE_BUS16BITS 1
#define CLOCK_BASE 9830400 /* 9.8304 MHz */
#define MAX_PAGES 16 /* 16 RAM pages at max */
#define MAX_RAM_SIZE 0x80000 /* 512 KB */
#if MAX_RAM_SIZE > MAX_PAGES * USE_WINDOWSIZE
#undef MAX_RAM_SIZE
#define MAX_RAM_SIZE (MAX_PAGES * USE_WINDOWSIZE)
#endif
#define N2_IOPORTS 0x10
#define NEED_DETECT_RAM
#define NEED_SCA_MSCI_INTR
#define MAX_TX_BUFFERS 10
static char *hw = NULL; /* pointer to hw=xxx command line string */
/* RISCom/N2 Board Registers */
/* PC Control Register */
#define N2_PCR 0
#define PCR_RUNSCA 1 /* Run 64570 */
#define PCR_VPM 2 /* Enable VPM - needed if using RAM above 1 MB */
#define PCR_ENWIN 4 /* Open window */
#define PCR_BUS16 8 /* 16-bit bus */
/* Memory Base Address Register */
#define N2_BAR 2
/* Page Scan Register */
#define N2_PSR 4
#define WIN16K 0x00
#define WIN32K 0x20
#define WIN64K 0x40
#define PSR_WINBITS 0x60
#define PSR_DMAEN 0x80
#define PSR_PAGEBITS 0x0F
/* Modem Control Reg */
#define N2_MCR 6
#define CLOCK_OUT_PORT1 0x80
#define CLOCK_OUT_PORT0 0x40
#define TX422_PORT1 0x20
#define TX422_PORT0 0x10
#define DSR_PORT1 0x08
#define DSR_PORT0 0x04
#define DTR_PORT1 0x02
#define DTR_PORT0 0x01
typedef struct port_s {
struct net_device *dev;
struct card_s *card;
spinlock_t lock; /* TX lock */
sync_serial_settings settings;
int valid; /* port enabled */
int rxpart; /* partial frame received, next frame invalid*/
unsigned short encoding;
unsigned short parity;
u16 rxin; /* rx ring buffer 'in' pointer */
u16 txin; /* tx ring buffer 'in' and 'last' pointers */
u16 txlast;
u8 rxs, txs, tmc; /* SCA registers */
u8 phy_node; /* physical port # - 0 or 1 */
u8 log_node; /* logical port # */
}port_t;
typedef struct card_s {
u8 __iomem *winbase; /* ISA window base address */
u32 phy_winbase; /* ISA physical base address */
u32 ram_size; /* number of bytes */
u16 io; /* IO Base address */
u16 buff_offset; /* offset of first buffer of first channel */
u16 rx_ring_buffers; /* number of buffers in a ring */
u16 tx_ring_buffers;
u8 irq; /* IRQ (3-15) */
port_t ports[2];
struct card_s *next_card;
}card_t;
static card_t *first_card;
static card_t **new_card = &first_card;
#define sca_reg(reg, card) (0x8000 | (card)->io | \
((reg) & 0x0F) | (((reg) & 0xF0) << 6))
#define sca_in(reg, card) inb(sca_reg(reg, card))
#define sca_out(value, reg, card) outb(value, sca_reg(reg, card))
#define sca_inw(reg, card) inw(sca_reg(reg, card))
#define sca_outw(value, reg, card) outw(value, sca_reg(reg, card))
#define port_to_card(port) ((port)->card)
#define log_node(port) ((port)->log_node)
#define phy_node(port) ((port)->phy_node)
#define winsize(card) (USE_WINDOWSIZE)
#define winbase(card) ((card)->winbase)
#define get_port(card, port) ((card)->ports[port].valid ? \
&(card)->ports[port] : NULL)
static __inline__ u8 sca_get_page(card_t *card)
{
return inb(card->io + N2_PSR) & PSR_PAGEBITS;
}
static __inline__ void openwin(card_t *card, u8 page)
{
u8 psr = inb(card->io + N2_PSR);
outb((psr & ~PSR_PAGEBITS) | page, card->io + N2_PSR);
}
#include "hd6457x.c"
static void n2_set_iface(port_t *port)
{
card_t *card = port->card;
int io = card->io;
u8 mcr = inb(io + N2_MCR);
u8 msci = get_msci(port);
u8 rxs = port->rxs & CLK_BRG_MASK;
u8 txs = port->txs & CLK_BRG_MASK;
switch(port->settings.clock_type) {
case CLOCK_INT:
mcr |= port->phy_node ? CLOCK_OUT_PORT1 : CLOCK_OUT_PORT0;
rxs |= CLK_BRG_RX; /* BRG output */
txs |= CLK_RXCLK_TX; /* RX clock */
break;
case CLOCK_TXINT:
mcr |= port->phy_node ? CLOCK_OUT_PORT1 : CLOCK_OUT_PORT0;
rxs |= CLK_LINE_RX; /* RXC input */
txs |= CLK_BRG_TX; /* BRG output */
break;
case CLOCK_TXFROMRX:
mcr |= port->phy_node ? CLOCK_OUT_PORT1 : CLOCK_OUT_PORT0;
rxs |= CLK_LINE_RX; /* RXC input */
txs |= CLK_RXCLK_TX; /* RX clock */
break;
default: /* Clock EXTernal */
mcr &= port->phy_node ? ~CLOCK_OUT_PORT1 : ~CLOCK_OUT_PORT0;
rxs |= CLK_LINE_RX; /* RXC input */
txs |= CLK_LINE_TX; /* TXC input */
}
outb(mcr, io + N2_MCR);
port->rxs = rxs;
port->txs = txs;
sca_out(rxs, msci + RXS, card);
sca_out(txs, msci + TXS, card);
sca_set_port(port);
}
static int n2_open(struct net_device *dev)
{
port_t *port = dev_to_port(dev);
int io = port->card->io;
u8 mcr = inb(io + N2_MCR) | (port->phy_node ? TX422_PORT1:TX422_PORT0);
int result;
result = hdlc_open(dev);
if (result)
return result;
mcr &= port->phy_node ? ~DTR_PORT1 : ~DTR_PORT0; /* set DTR ON */
outb(mcr, io + N2_MCR);
outb(inb(io + N2_PCR) | PCR_ENWIN, io + N2_PCR); /* open window */
outb(inb(io + N2_PSR) | PSR_DMAEN, io + N2_PSR); /* enable dma */
sca_open(dev);
n2_set_iface(port);
return 0;
}
static int n2_close(struct net_device *dev)
{
port_t *port = dev_to_port(dev);
int io = port->card->io;
u8 mcr = inb(io+N2_MCR) | (port->phy_node ? TX422_PORT1 : TX422_PORT0);
sca_close(dev);
mcr |= port->phy_node ? DTR_PORT1 : DTR_PORT0; /* set DTR OFF */
outb(mcr, io + N2_MCR);
hdlc_close(dev);
return 0;
}
static int n2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
const size_t size = sizeof(sync_serial_settings);
sync_serial_settings new_line;
sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
port_t *port = dev_to_port(dev);
#ifdef DEBUG_RINGS
if (cmd == SIOCDEVPRIVATE) {
sca_dump_rings(dev);
return 0;
}
#endif
if (cmd != SIOCWANDEV)
return hdlc_ioctl(dev, ifr, cmd);
switch(ifr->ifr_settings.type) {
case IF_GET_IFACE:
ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
if (ifr->ifr_settings.size < size) {
ifr->ifr_settings.size = size; /* data size wanted */
return -ENOBUFS;
}
if (copy_to_user(line, &port->settings, size))
return -EFAULT;
return 0;
case IF_IFACE_SYNC_SERIAL:
if(!capable(CAP_NET_ADMIN))
return -EPERM;
if (copy_from_user(&new_line, line, size))
return -EFAULT;
if (new_line.clock_type != CLOCK_EXT &&
new_line.clock_type != CLOCK_TXFROMRX &&
new_line.clock_type != CLOCK_INT &&
new_line.clock_type != CLOCK_TXINT)
return -EINVAL; /* No such clock setting */
if (new_line.loopback != 0 && new_line.loopback != 1)
return -EINVAL;
memcpy(&port->settings, &new_line, size); /* Update settings */
n2_set_iface(port);
return 0;
default:
return hdlc_ioctl(dev, ifr, cmd);
}
}
static void n2_destroy_card(card_t *card)
{
int cnt;
for (cnt = 0; cnt < 2; cnt++)
if (card->ports[cnt].card) {
struct net_device *dev = port_to_dev(&card->ports[cnt]);
unregister_hdlc_device(dev);
}
if (card->irq)
free_irq(card->irq, card);
if (card->winbase) {
iounmap(card->winbase);
release_mem_region(card->phy_winbase, USE_WINDOWSIZE);
}
if (card->io)
release_region(card->io, N2_IOPORTS);
if (card->ports[0].dev)
free_netdev(card->ports[0].dev);
if (card->ports[1].dev)
free_netdev(card->ports[1].dev);
kfree(card);
}
static int __init n2_run(unsigned long io, unsigned long irq,
unsigned long winbase, long valid0, long valid1)
{
card_t *card;
u8 cnt, pcr;
int i;
if (io < 0x200 || io > 0x3FF || (io % N2_IOPORTS) != 0) {
printk(KERN_ERR "n2: invalid I/O port value\n");
return -ENODEV;
}
if (irq < 3 || irq > 15 || irq == 6) /* FIXME */ {
printk(KERN_ERR "n2: invalid IRQ value\n");
return -ENODEV;
}
if (winbase < 0xA0000 || winbase > 0xFFFFF || (winbase & 0xFFF) != 0) {
printk(KERN_ERR "n2: invalid RAM value\n");
return -ENODEV;
}
card = kmalloc(sizeof(card_t), GFP_KERNEL);
if (card == NULL) {
printk(KERN_ERR "n2: unable to allocate memory\n");
return -ENOBUFS;
}
memset(card, 0, sizeof(card_t));
card->ports[0].dev = alloc_hdlcdev(&card->ports[0]);
card->ports[1].dev = alloc_hdlcdev(&card->ports[1]);
if (!card->ports[0].dev || !card->ports[1].dev) {
printk(KERN_ERR "n2: unable to allocate memory\n");
n2_destroy_card(card);
return -ENOMEM;
}
if (!request_region(io, N2_IOPORTS, devname)) {
printk(KERN_ERR "n2: I/O port region in use\n");
n2_destroy_card(card);
return -EBUSY;
}
card->io = io;
if (request_irq(irq, &sca_intr, 0, devname, card)) {
printk(KERN_ERR "n2: could not allocate IRQ\n");
n2_destroy_card(card);
return(-EBUSY);
}
card->irq = irq;
if (!request_mem_region(winbase, USE_WINDOWSIZE, devname)) {
printk(KERN_ERR "n2: could not request RAM window\n");
n2_destroy_card(card);
return(-EBUSY);
}
card->phy_winbase = winbase;
card->winbase = ioremap(winbase, USE_WINDOWSIZE);
outb(0, io + N2_PCR);
outb(winbase >> 12, io + N2_BAR);
switch (USE_WINDOWSIZE) {
case 16384:
outb(WIN16K, io + N2_PSR);
break;
case 32768:
outb(WIN32K, io + N2_PSR);
break;
case 65536:
outb(WIN64K, io + N2_PSR);
break;
default:
printk(KERN_ERR "n2: invalid window size\n");
n2_destroy_card(card);
return -ENODEV;
}
pcr = PCR_ENWIN | PCR_VPM | (USE_BUS16BITS ? PCR_BUS16 : 0);
outb(pcr, io + N2_PCR);
card->ram_size = sca_detect_ram(card, card->winbase, MAX_RAM_SIZE);
/* number of TX + RX buffers for one port */
i = card->ram_size / ((valid0 + valid1) * (sizeof(pkt_desc) +
HDLC_MAX_MRU));
card->tx_ring_buffers = min(i / 2, MAX_TX_BUFFERS);
card->rx_ring_buffers = i - card->tx_ring_buffers;
card->buff_offset = (valid0 + valid1) * sizeof(pkt_desc) *
(card->tx_ring_buffers + card->rx_ring_buffers);
printk(KERN_INFO "n2: RISCom/N2 %u KB RAM, IRQ%u, "
"using %u TX + %u RX packets rings\n", card->ram_size / 1024,
card->irq, card->tx_ring_buffers, card->rx_ring_buffers);
if (card->tx_ring_buffers < 1) {
printk(KERN_ERR "n2: RAM test failed\n");
n2_destroy_card(card);
return -EIO;
}
pcr |= PCR_RUNSCA; /* run SCA */
outb(pcr, io + N2_PCR);
outb(0, io + N2_MCR);
sca_init(card, 0);
for (cnt = 0; cnt < 2; cnt++) {
port_t *port = &card->ports[cnt];
struct net_device *dev = port_to_dev(port);
hdlc_device *hdlc = dev_to_hdlc(dev);
if ((cnt == 0 && !valid0) || (cnt == 1 && !valid1))
continue;
port->phy_node = cnt;
port->valid = 1;
if ((cnt == 1) && valid0)
port->log_node = 1;
spin_lock_init(&port->lock);
SET_MODULE_OWNER(dev);
dev->irq = irq;
dev->mem_start = winbase;
dev->mem_end = winbase + USE_WINDOWSIZE - 1;
dev->tx_queue_len = 50;
dev->do_ioctl = n2_ioctl;
dev->open = n2_open;
dev->stop = n2_close;
hdlc->attach = sca_attach;
hdlc->xmit = sca_xmit;
port->settings.clock_type = CLOCK_EXT;
port->card = card;
if (register_hdlc_device(dev)) {
printk(KERN_WARNING "n2: unable to register hdlc "
"device\n");
port->card = NULL;
n2_destroy_card(card);
return -ENOBUFS;
}
sca_init_sync_port(port); /* Set up SCA memory */
printk(KERN_INFO "%s: RISCom/N2 node %d\n",
dev->name, port->phy_node);
}
*new_card = card;
new_card = &card->next_card;
return 0;
}
static int __init n2_init(void)
{
if (hw==NULL) {
#ifdef MODULE
printk(KERN_INFO "n2: no card initialized\n");
#endif
return -ENOSYS; /* no parameters specified, abort */
}
printk(KERN_INFO "%s\n", version);
do {
unsigned long io, irq, ram;
long valid[2] = { 0, 0 }; /* Default = both ports disabled */
io = simple_strtoul(hw, &hw, 0);
if (*hw++ != ',')
break;
irq = simple_strtoul(hw, &hw, 0);
if (*hw++ != ',')
break;
ram = simple_strtoul(hw, &hw, 0);
if (*hw++ != ',')
break;
while(1) {
if (*hw == '0' && !valid[0])
valid[0] = 1; /* Port 0 enabled */
else if (*hw == '1' && !valid[1])
valid[1] = 1; /* Port 1 enabled */
else
break;
hw++;
}
if (!valid[0] && !valid[1])
break; /* at least one port must be used */
if (*hw == ':' || *hw == '\x0')
n2_run(io, irq, ram, valid[0], valid[1]);
if (*hw == '\x0')
return first_card ? 0 : -ENOSYS;
}while(*hw++ == ':');
printk(KERN_ERR "n2: invalid hardware parameters\n");
return first_card ? 0 : -ENOSYS;
}
static void __exit n2_cleanup(void)
{
card_t *card = first_card;
while (card) {
card_t *ptr = card;
card = card->next_card;
n2_destroy_card(ptr);
}
}
module_init(n2_init);
module_exit(n2_cleanup);
MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>");
MODULE_DESCRIPTION("RISCom/N2 serial port driver");
MODULE_LICENSE("GPL v2");
module_param(hw, charp, 0444); /* hw=io,irq,ram,ports:io,irq,... */
Reference in New Issue View Git Blame Copy Permalink