mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-02 00:24:12 +08:00
1fa34e49e4
The ops is only showing a trace telling a critical trip point is crossed. The same information is given by the thermal framework. This is redundant, remove the code. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20201210121514.25760-4-daniel.lezcano@linaro.org
638 lines
14 KiB
C
638 lines
14 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* R-Car THS/TSC thermal sensor driver
|
|
*
|
|
* Copyright (C) 2012 Renesas Solutions Corp.
|
|
* Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
|
|
*/
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/reboot.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/thermal.h>
|
|
|
|
#include "thermal_hwmon.h"
|
|
|
|
#define IDLE_INTERVAL 5000
|
|
|
|
#define COMMON_STR 0x00
|
|
#define COMMON_ENR 0x04
|
|
#define COMMON_INTMSK 0x0c
|
|
|
|
#define REG_POSNEG 0x20
|
|
#define REG_FILONOFF 0x28
|
|
#define REG_THSCR 0x2c
|
|
#define REG_THSSR 0x30
|
|
#define REG_INTCTRL 0x34
|
|
|
|
/* THSCR */
|
|
#define CPCTL (1 << 12)
|
|
|
|
/* THSSR */
|
|
#define CTEMP 0x3f
|
|
|
|
struct rcar_thermal_common {
|
|
void __iomem *base;
|
|
struct device *dev;
|
|
struct list_head head;
|
|
spinlock_t lock;
|
|
};
|
|
|
|
struct rcar_thermal_chip {
|
|
unsigned int use_of_thermal : 1;
|
|
unsigned int has_filonoff : 1;
|
|
unsigned int irq_per_ch : 1;
|
|
unsigned int needs_suspend_resume : 1;
|
|
unsigned int nirqs;
|
|
unsigned int ctemp_bands;
|
|
};
|
|
|
|
static const struct rcar_thermal_chip rcar_thermal = {
|
|
.use_of_thermal = 0,
|
|
.has_filonoff = 1,
|
|
.irq_per_ch = 0,
|
|
.needs_suspend_resume = 0,
|
|
.nirqs = 1,
|
|
.ctemp_bands = 1,
|
|
};
|
|
|
|
static const struct rcar_thermal_chip rcar_gen2_thermal = {
|
|
.use_of_thermal = 1,
|
|
.has_filonoff = 1,
|
|
.irq_per_ch = 0,
|
|
.needs_suspend_resume = 0,
|
|
.nirqs = 1,
|
|
.ctemp_bands = 1,
|
|
};
|
|
|
|
static const struct rcar_thermal_chip rcar_gen3_thermal = {
|
|
.use_of_thermal = 1,
|
|
.has_filonoff = 0,
|
|
.irq_per_ch = 1,
|
|
.needs_suspend_resume = 1,
|
|
/*
|
|
* The Gen3 chip has 3 interrupts, but this driver uses only 2
|
|
* interrupts to detect a temperature change, rise or fall.
|
|
*/
|
|
.nirqs = 2,
|
|
.ctemp_bands = 2,
|
|
};
|
|
|
|
struct rcar_thermal_priv {
|
|
void __iomem *base;
|
|
struct rcar_thermal_common *common;
|
|
struct thermal_zone_device *zone;
|
|
const struct rcar_thermal_chip *chip;
|
|
struct delayed_work work;
|
|
struct mutex lock;
|
|
struct list_head list;
|
|
int id;
|
|
};
|
|
|
|
#define rcar_thermal_for_each_priv(pos, common) \
|
|
list_for_each_entry(pos, &common->head, list)
|
|
|
|
#define MCELSIUS(temp) ((temp) * 1000)
|
|
#define rcar_zone_to_priv(zone) ((zone)->devdata)
|
|
#define rcar_priv_to_dev(priv) ((priv)->common->dev)
|
|
#define rcar_has_irq_support(priv) ((priv)->common->base)
|
|
#define rcar_id_to_shift(priv) ((priv)->id * 8)
|
|
|
|
static const struct of_device_id rcar_thermal_dt_ids[] = {
|
|
{
|
|
.compatible = "renesas,rcar-thermal",
|
|
.data = &rcar_thermal,
|
|
},
|
|
{
|
|
.compatible = "renesas,rcar-gen2-thermal",
|
|
.data = &rcar_gen2_thermal,
|
|
},
|
|
{
|
|
.compatible = "renesas,thermal-r8a774c0",
|
|
.data = &rcar_gen3_thermal,
|
|
},
|
|
{
|
|
.compatible = "renesas,thermal-r8a77970",
|
|
.data = &rcar_gen3_thermal,
|
|
},
|
|
{
|
|
.compatible = "renesas,thermal-r8a77990",
|
|
.data = &rcar_gen3_thermal,
|
|
},
|
|
{
|
|
.compatible = "renesas,thermal-r8a77995",
|
|
.data = &rcar_gen3_thermal,
|
|
},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, rcar_thermal_dt_ids);
|
|
|
|
/*
|
|
* basic functions
|
|
*/
|
|
#define rcar_thermal_common_read(c, r) \
|
|
_rcar_thermal_common_read(c, COMMON_ ##r)
|
|
static u32 _rcar_thermal_common_read(struct rcar_thermal_common *common,
|
|
u32 reg)
|
|
{
|
|
return ioread32(common->base + reg);
|
|
}
|
|
|
|
#define rcar_thermal_common_write(c, r, d) \
|
|
_rcar_thermal_common_write(c, COMMON_ ##r, d)
|
|
static void _rcar_thermal_common_write(struct rcar_thermal_common *common,
|
|
u32 reg, u32 data)
|
|
{
|
|
iowrite32(data, common->base + reg);
|
|
}
|
|
|
|
#define rcar_thermal_common_bset(c, r, m, d) \
|
|
_rcar_thermal_common_bset(c, COMMON_ ##r, m, d)
|
|
static void _rcar_thermal_common_bset(struct rcar_thermal_common *common,
|
|
u32 reg, u32 mask, u32 data)
|
|
{
|
|
u32 val;
|
|
|
|
val = ioread32(common->base + reg);
|
|
val &= ~mask;
|
|
val |= (data & mask);
|
|
iowrite32(val, common->base + reg);
|
|
}
|
|
|
|
#define rcar_thermal_read(p, r) _rcar_thermal_read(p, REG_ ##r)
|
|
static u32 _rcar_thermal_read(struct rcar_thermal_priv *priv, u32 reg)
|
|
{
|
|
return ioread32(priv->base + reg);
|
|
}
|
|
|
|
#define rcar_thermal_write(p, r, d) _rcar_thermal_write(p, REG_ ##r, d)
|
|
static void _rcar_thermal_write(struct rcar_thermal_priv *priv,
|
|
u32 reg, u32 data)
|
|
{
|
|
iowrite32(data, priv->base + reg);
|
|
}
|
|
|
|
#define rcar_thermal_bset(p, r, m, d) _rcar_thermal_bset(p, REG_ ##r, m, d)
|
|
static void _rcar_thermal_bset(struct rcar_thermal_priv *priv, u32 reg,
|
|
u32 mask, u32 data)
|
|
{
|
|
u32 val;
|
|
|
|
val = ioread32(priv->base + reg);
|
|
val &= ~mask;
|
|
val |= (data & mask);
|
|
iowrite32(val, priv->base + reg);
|
|
}
|
|
|
|
/*
|
|
* zone device functions
|
|
*/
|
|
static int rcar_thermal_update_temp(struct rcar_thermal_priv *priv)
|
|
{
|
|
struct device *dev = rcar_priv_to_dev(priv);
|
|
int old, new, ctemp = -EINVAL;
|
|
unsigned int i;
|
|
|
|
mutex_lock(&priv->lock);
|
|
|
|
/*
|
|
* TSC decides a value of CPTAP automatically,
|
|
* and this is the conditions which validate interrupt.
|
|
*/
|
|
rcar_thermal_bset(priv, THSCR, CPCTL, CPCTL);
|
|
|
|
old = ~0;
|
|
for (i = 0; i < 128; i++) {
|
|
/*
|
|
* we need to wait 300us after changing comparator offset
|
|
* to get stable temperature.
|
|
* see "Usage Notes" on datasheet
|
|
*/
|
|
usleep_range(300, 400);
|
|
|
|
new = rcar_thermal_read(priv, THSSR) & CTEMP;
|
|
if (new == old) {
|
|
ctemp = new;
|
|
break;
|
|
}
|
|
old = new;
|
|
}
|
|
|
|
if (ctemp < 0) {
|
|
dev_err(dev, "thermal sensor was broken\n");
|
|
goto err_out_unlock;
|
|
}
|
|
|
|
/*
|
|
* enable IRQ
|
|
*/
|
|
if (rcar_has_irq_support(priv)) {
|
|
if (priv->chip->has_filonoff)
|
|
rcar_thermal_write(priv, FILONOFF, 0);
|
|
|
|
/* enable Rising/Falling edge interrupt */
|
|
rcar_thermal_write(priv, POSNEG, 0x1);
|
|
rcar_thermal_write(priv, INTCTRL, (((ctemp - 0) << 8) |
|
|
((ctemp - 1) << 0)));
|
|
}
|
|
|
|
err_out_unlock:
|
|
mutex_unlock(&priv->lock);
|
|
|
|
return ctemp;
|
|
}
|
|
|
|
static int rcar_thermal_get_current_temp(struct rcar_thermal_priv *priv,
|
|
int *temp)
|
|
{
|
|
int ctemp;
|
|
|
|
ctemp = rcar_thermal_update_temp(priv);
|
|
if (ctemp < 0)
|
|
return ctemp;
|
|
|
|
/* Guaranteed operating range is -45C to 125C. */
|
|
|
|
if (priv->chip->ctemp_bands == 1)
|
|
*temp = MCELSIUS((ctemp * 5) - 65);
|
|
else if (ctemp < 24)
|
|
*temp = MCELSIUS(((ctemp * 55) - 720) / 10);
|
|
else
|
|
*temp = MCELSIUS((ctemp * 5) - 60);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rcar_thermal_of_get_temp(void *data, int *temp)
|
|
{
|
|
struct rcar_thermal_priv *priv = data;
|
|
|
|
return rcar_thermal_get_current_temp(priv, temp);
|
|
}
|
|
|
|
static int rcar_thermal_get_temp(struct thermal_zone_device *zone, int *temp)
|
|
{
|
|
struct rcar_thermal_priv *priv = rcar_zone_to_priv(zone);
|
|
|
|
return rcar_thermal_get_current_temp(priv, temp);
|
|
}
|
|
|
|
static int rcar_thermal_get_trip_type(struct thermal_zone_device *zone,
|
|
int trip, enum thermal_trip_type *type)
|
|
{
|
|
struct rcar_thermal_priv *priv = rcar_zone_to_priv(zone);
|
|
struct device *dev = rcar_priv_to_dev(priv);
|
|
|
|
/* see rcar_thermal_get_temp() */
|
|
switch (trip) {
|
|
case 0: /* +90 <= temp */
|
|
*type = THERMAL_TRIP_CRITICAL;
|
|
break;
|
|
default:
|
|
dev_err(dev, "rcar driver trip error\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rcar_thermal_get_trip_temp(struct thermal_zone_device *zone,
|
|
int trip, int *temp)
|
|
{
|
|
struct rcar_thermal_priv *priv = rcar_zone_to_priv(zone);
|
|
struct device *dev = rcar_priv_to_dev(priv);
|
|
|
|
/* see rcar_thermal_get_temp() */
|
|
switch (trip) {
|
|
case 0: /* +90 <= temp */
|
|
*temp = MCELSIUS(90);
|
|
break;
|
|
default:
|
|
dev_err(dev, "rcar driver trip error\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct thermal_zone_of_device_ops rcar_thermal_zone_of_ops = {
|
|
.get_temp = rcar_thermal_of_get_temp,
|
|
};
|
|
|
|
static struct thermal_zone_device_ops rcar_thermal_zone_ops = {
|
|
.get_temp = rcar_thermal_get_temp,
|
|
.get_trip_type = rcar_thermal_get_trip_type,
|
|
.get_trip_temp = rcar_thermal_get_trip_temp,
|
|
};
|
|
|
|
/*
|
|
* interrupt
|
|
*/
|
|
#define rcar_thermal_irq_enable(p) _rcar_thermal_irq_ctrl(p, 1)
|
|
#define rcar_thermal_irq_disable(p) _rcar_thermal_irq_ctrl(p, 0)
|
|
static void _rcar_thermal_irq_ctrl(struct rcar_thermal_priv *priv, int enable)
|
|
{
|
|
struct rcar_thermal_common *common = priv->common;
|
|
unsigned long flags;
|
|
u32 mask = 0x3 << rcar_id_to_shift(priv); /* enable Rising/Falling */
|
|
|
|
if (!rcar_has_irq_support(priv))
|
|
return;
|
|
|
|
spin_lock_irqsave(&common->lock, flags);
|
|
|
|
rcar_thermal_common_bset(common, INTMSK, mask, enable ? 0 : mask);
|
|
|
|
spin_unlock_irqrestore(&common->lock, flags);
|
|
}
|
|
|
|
static void rcar_thermal_work(struct work_struct *work)
|
|
{
|
|
struct rcar_thermal_priv *priv;
|
|
int ret;
|
|
|
|
priv = container_of(work, struct rcar_thermal_priv, work.work);
|
|
|
|
ret = rcar_thermal_update_temp(priv);
|
|
if (ret < 0)
|
|
return;
|
|
|
|
rcar_thermal_irq_enable(priv);
|
|
|
|
thermal_zone_device_update(priv->zone, THERMAL_EVENT_UNSPECIFIED);
|
|
}
|
|
|
|
static u32 rcar_thermal_had_changed(struct rcar_thermal_priv *priv, u32 status)
|
|
{
|
|
struct device *dev = rcar_priv_to_dev(priv);
|
|
|
|
status = (status >> rcar_id_to_shift(priv)) & 0x3;
|
|
|
|
if (status) {
|
|
dev_dbg(dev, "thermal%d %s%s\n",
|
|
priv->id,
|
|
(status & 0x2) ? "Rising " : "",
|
|
(status & 0x1) ? "Falling" : "");
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
static irqreturn_t rcar_thermal_irq(int irq, void *data)
|
|
{
|
|
struct rcar_thermal_common *common = data;
|
|
struct rcar_thermal_priv *priv;
|
|
u32 status, mask;
|
|
|
|
spin_lock(&common->lock);
|
|
|
|
mask = rcar_thermal_common_read(common, INTMSK);
|
|
status = rcar_thermal_common_read(common, STR);
|
|
rcar_thermal_common_write(common, STR, 0x000F0F0F & mask);
|
|
|
|
spin_unlock(&common->lock);
|
|
|
|
status = status & ~mask;
|
|
|
|
/*
|
|
* check the status
|
|
*/
|
|
rcar_thermal_for_each_priv(priv, common) {
|
|
if (rcar_thermal_had_changed(priv, status)) {
|
|
rcar_thermal_irq_disable(priv);
|
|
queue_delayed_work(system_freezable_wq, &priv->work,
|
|
msecs_to_jiffies(300));
|
|
}
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/*
|
|
* platform functions
|
|
*/
|
|
static int rcar_thermal_remove(struct platform_device *pdev)
|
|
{
|
|
struct rcar_thermal_common *common = platform_get_drvdata(pdev);
|
|
struct device *dev = &pdev->dev;
|
|
struct rcar_thermal_priv *priv;
|
|
|
|
rcar_thermal_for_each_priv(priv, common) {
|
|
rcar_thermal_irq_disable(priv);
|
|
cancel_delayed_work_sync(&priv->work);
|
|
if (priv->chip->use_of_thermal)
|
|
thermal_remove_hwmon_sysfs(priv->zone);
|
|
else
|
|
thermal_zone_device_unregister(priv->zone);
|
|
}
|
|
|
|
pm_runtime_put(dev);
|
|
pm_runtime_disable(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rcar_thermal_probe(struct platform_device *pdev)
|
|
{
|
|
struct rcar_thermal_common *common;
|
|
struct rcar_thermal_priv *priv;
|
|
struct device *dev = &pdev->dev;
|
|
struct resource *res, *irq;
|
|
const struct rcar_thermal_chip *chip = of_device_get_match_data(dev);
|
|
int mres = 0;
|
|
int i;
|
|
int ret = -ENODEV;
|
|
int idle = IDLE_INTERVAL;
|
|
u32 enr_bits = 0;
|
|
|
|
common = devm_kzalloc(dev, sizeof(*common), GFP_KERNEL);
|
|
if (!common)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, common);
|
|
|
|
INIT_LIST_HEAD(&common->head);
|
|
spin_lock_init(&common->lock);
|
|
common->dev = dev;
|
|
|
|
pm_runtime_enable(dev);
|
|
pm_runtime_get_sync(dev);
|
|
|
|
for (i = 0; i < chip->nirqs; i++) {
|
|
irq = platform_get_resource(pdev, IORESOURCE_IRQ, i);
|
|
if (!irq)
|
|
continue;
|
|
if (!common->base) {
|
|
/*
|
|
* platform has IRQ support.
|
|
* Then, driver uses common registers
|
|
* rcar_has_irq_support() will be enabled
|
|
*/
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM,
|
|
mres++);
|
|
common->base = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(common->base)) {
|
|
ret = PTR_ERR(common->base);
|
|
goto error_unregister;
|
|
}
|
|
|
|
idle = 0; /* polling delay is not needed */
|
|
}
|
|
|
|
ret = devm_request_irq(dev, irq->start, rcar_thermal_irq,
|
|
IRQF_SHARED, dev_name(dev), common);
|
|
if (ret) {
|
|
dev_err(dev, "irq request failed\n ");
|
|
goto error_unregister;
|
|
}
|
|
|
|
/* update ENR bits */
|
|
if (chip->irq_per_ch)
|
|
enr_bits |= 1 << i;
|
|
}
|
|
|
|
for (i = 0;; i++) {
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, mres++);
|
|
if (!res)
|
|
break;
|
|
|
|
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv) {
|
|
ret = -ENOMEM;
|
|
goto error_unregister;
|
|
}
|
|
|
|
priv->base = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(priv->base)) {
|
|
ret = PTR_ERR(priv->base);
|
|
goto error_unregister;
|
|
}
|
|
|
|
priv->common = common;
|
|
priv->id = i;
|
|
priv->chip = chip;
|
|
mutex_init(&priv->lock);
|
|
INIT_LIST_HEAD(&priv->list);
|
|
INIT_DELAYED_WORK(&priv->work, rcar_thermal_work);
|
|
ret = rcar_thermal_update_temp(priv);
|
|
if (ret < 0)
|
|
goto error_unregister;
|
|
|
|
if (chip->use_of_thermal) {
|
|
priv->zone = devm_thermal_zone_of_sensor_register(
|
|
dev, i, priv,
|
|
&rcar_thermal_zone_of_ops);
|
|
} else {
|
|
priv->zone = thermal_zone_device_register(
|
|
"rcar_thermal",
|
|
1, 0, priv,
|
|
&rcar_thermal_zone_ops, NULL, 0,
|
|
idle);
|
|
|
|
ret = thermal_zone_device_enable(priv->zone);
|
|
if (ret) {
|
|
thermal_zone_device_unregister(priv->zone);
|
|
priv->zone = ERR_PTR(ret);
|
|
}
|
|
}
|
|
if (IS_ERR(priv->zone)) {
|
|
dev_err(dev, "can't register thermal zone\n");
|
|
ret = PTR_ERR(priv->zone);
|
|
priv->zone = NULL;
|
|
goto error_unregister;
|
|
}
|
|
|
|
if (chip->use_of_thermal) {
|
|
/*
|
|
* thermal_zone doesn't enable hwmon as default,
|
|
* but, enable it here to keep compatible
|
|
*/
|
|
priv->zone->tzp->no_hwmon = false;
|
|
ret = thermal_add_hwmon_sysfs(priv->zone);
|
|
if (ret)
|
|
goto error_unregister;
|
|
}
|
|
|
|
rcar_thermal_irq_enable(priv);
|
|
|
|
list_move_tail(&priv->list, &common->head);
|
|
|
|
/* update ENR bits */
|
|
if (!chip->irq_per_ch)
|
|
enr_bits |= 3 << (i * 8);
|
|
}
|
|
|
|
if (common->base && enr_bits)
|
|
rcar_thermal_common_write(common, ENR, enr_bits);
|
|
|
|
dev_info(dev, "%d sensor probed\n", i);
|
|
|
|
return 0;
|
|
|
|
error_unregister:
|
|
rcar_thermal_remove(pdev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int rcar_thermal_suspend(struct device *dev)
|
|
{
|
|
struct rcar_thermal_common *common = dev_get_drvdata(dev);
|
|
struct rcar_thermal_priv *priv = list_first_entry(&common->head,
|
|
typeof(*priv), list);
|
|
|
|
if (priv->chip->needs_suspend_resume) {
|
|
rcar_thermal_common_write(common, ENR, 0);
|
|
rcar_thermal_irq_disable(priv);
|
|
rcar_thermal_bset(priv, THSCR, CPCTL, 0);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rcar_thermal_resume(struct device *dev)
|
|
{
|
|
struct rcar_thermal_common *common = dev_get_drvdata(dev);
|
|
struct rcar_thermal_priv *priv = list_first_entry(&common->head,
|
|
typeof(*priv), list);
|
|
int ret;
|
|
|
|
if (priv->chip->needs_suspend_resume) {
|
|
ret = rcar_thermal_update_temp(priv);
|
|
if (ret < 0)
|
|
return ret;
|
|
rcar_thermal_irq_enable(priv);
|
|
rcar_thermal_common_write(common, ENR, 0x03);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static SIMPLE_DEV_PM_OPS(rcar_thermal_pm_ops, rcar_thermal_suspend,
|
|
rcar_thermal_resume);
|
|
|
|
static struct platform_driver rcar_thermal_driver = {
|
|
.driver = {
|
|
.name = "rcar_thermal",
|
|
.pm = &rcar_thermal_pm_ops,
|
|
.of_match_table = rcar_thermal_dt_ids,
|
|
},
|
|
.probe = rcar_thermal_probe,
|
|
.remove = rcar_thermal_remove,
|
|
};
|
|
module_platform_driver(rcar_thermal_driver);
|
|
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_DESCRIPTION("R-Car THS/TSC thermal sensor driver");
|
|
MODULE_AUTHOR("Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>");
|