mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-05 10:04:12 +08:00
f0fba2ad1b
This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
350 lines
8.1 KiB
C
350 lines
8.1 KiB
C
/*
|
|
* Hitachi Audio Controller (AC97) support for SH7760/SH7780
|
|
*
|
|
* Copyright (c) 2007 Manuel Lauss <mano@roarinelk.homelinux.net>
|
|
* licensed under the terms outlined in the file COPYING at the root
|
|
* of the linux kernel sources.
|
|
*
|
|
* dont forget to set IPSEL/OMSEL register bits (in your board code) to
|
|
* enable HAC output pins!
|
|
*/
|
|
|
|
/* BIG FAT FIXME: although the SH7760 has 2 independent AC97 units, only
|
|
* the FIRST can be used since ASoC does not pass any information to the
|
|
* ac97_read/write() functions regarding WHICH unit to use. You'll have
|
|
* to edit the code a bit to use the other AC97 unit. --mlau
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/wait.h>
|
|
#include <linux/delay.h>
|
|
#include <sound/core.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/ac97_codec.h>
|
|
#include <sound/initval.h>
|
|
#include <sound/soc.h>
|
|
|
|
/* regs and bits */
|
|
#define HACCR 0x08
|
|
#define HACCSAR 0x20
|
|
#define HACCSDR 0x24
|
|
#define HACPCML 0x28
|
|
#define HACPCMR 0x2C
|
|
#define HACTIER 0x50
|
|
#define HACTSR 0x54
|
|
#define HACRIER 0x58
|
|
#define HACRSR 0x5C
|
|
#define HACACR 0x60
|
|
|
|
#define CR_CR (1 << 15) /* "codec-ready" indicator */
|
|
#define CR_CDRT (1 << 11) /* cold reset */
|
|
#define CR_WMRT (1 << 10) /* warm reset */
|
|
#define CR_B9 (1 << 9) /* the mysterious "bit 9" */
|
|
#define CR_ST (1 << 5) /* AC97 link start bit */
|
|
|
|
#define CSAR_RD (1 << 19) /* AC97 data read bit */
|
|
#define CSAR_WR (0)
|
|
|
|
#define TSR_CMDAMT (1 << 31)
|
|
#define TSR_CMDDMT (1 << 30)
|
|
|
|
#define RSR_STARY (1 << 22)
|
|
#define RSR_STDRY (1 << 21)
|
|
|
|
#define ACR_DMARX16 (1 << 30)
|
|
#define ACR_DMATX16 (1 << 29)
|
|
#define ACR_TX12ATOM (1 << 26)
|
|
#define ACR_DMARX20 ((1 << 24) | (1 << 22))
|
|
#define ACR_DMATX20 ((1 << 23) | (1 << 21))
|
|
|
|
#define CSDR_SHIFT 4
|
|
#define CSDR_MASK (0xffff << CSDR_SHIFT)
|
|
#define CSAR_SHIFT 12
|
|
#define CSAR_MASK (0x7f << CSAR_SHIFT)
|
|
|
|
#define AC97_WRITE_RETRY 1
|
|
#define AC97_READ_RETRY 5
|
|
|
|
/* manual-suggested AC97 codec access timeouts (us) */
|
|
#define TMO_E1 500 /* 21 < E1 < 1000 */
|
|
#define TMO_E2 13 /* 13 < E2 */
|
|
#define TMO_E3 21 /* 21 < E3 */
|
|
#define TMO_E4 500 /* 21 < E4 < 1000 */
|
|
|
|
struct hac_priv {
|
|
unsigned long mmio; /* HAC base address */
|
|
} hac_cpu_data[] = {
|
|
#if defined(CONFIG_CPU_SUBTYPE_SH7760)
|
|
{
|
|
.mmio = 0xFE240000,
|
|
},
|
|
{
|
|
.mmio = 0xFE250000,
|
|
},
|
|
#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
|
|
{
|
|
.mmio = 0xFFE40000,
|
|
},
|
|
#else
|
|
#error "Unsupported SuperH SoC"
|
|
#endif
|
|
};
|
|
|
|
#define HACREG(reg) (*(unsigned long *)(hac->mmio + (reg)))
|
|
|
|
/*
|
|
* AC97 read/write flow as outlined in the SH7760 manual (pages 903-906)
|
|
*/
|
|
static int hac_get_codec_data(struct hac_priv *hac, unsigned short r,
|
|
unsigned short *v)
|
|
{
|
|
unsigned int to1, to2, i;
|
|
unsigned short adr;
|
|
|
|
for (i = AC97_READ_RETRY; i; i--) {
|
|
*v = 0;
|
|
/* wait for HAC to receive something from the codec */
|
|
for (to1 = TMO_E4;
|
|
to1 && !(HACREG(HACRSR) & RSR_STARY);
|
|
--to1)
|
|
udelay(1);
|
|
for (to2 = TMO_E4;
|
|
to2 && !(HACREG(HACRSR) & RSR_STDRY);
|
|
--to2)
|
|
udelay(1);
|
|
|
|
if (!to1 && !to2)
|
|
return 0; /* codec comm is down */
|
|
|
|
adr = ((HACREG(HACCSAR) & CSAR_MASK) >> CSAR_SHIFT);
|
|
*v = ((HACREG(HACCSDR) & CSDR_MASK) >> CSDR_SHIFT);
|
|
|
|
HACREG(HACRSR) &= ~(RSR_STDRY | RSR_STARY);
|
|
|
|
if (r == adr)
|
|
break;
|
|
|
|
/* manual says: wait at least 21 usec before retrying */
|
|
udelay(21);
|
|
}
|
|
HACREG(HACRSR) &= ~(RSR_STDRY | RSR_STARY);
|
|
return i;
|
|
}
|
|
|
|
static unsigned short hac_read_codec_aux(struct hac_priv *hac,
|
|
unsigned short reg)
|
|
{
|
|
unsigned short val;
|
|
unsigned int i, to;
|
|
|
|
for (i = AC97_READ_RETRY; i; i--) {
|
|
/* send_read_request */
|
|
local_irq_disable();
|
|
HACREG(HACTSR) &= ~(TSR_CMDAMT);
|
|
HACREG(HACCSAR) = (reg << CSAR_SHIFT) | CSAR_RD;
|
|
local_irq_enable();
|
|
|
|
for (to = TMO_E3;
|
|
to && !(HACREG(HACTSR) & TSR_CMDAMT);
|
|
--to)
|
|
udelay(1);
|
|
|
|
HACREG(HACTSR) &= ~TSR_CMDAMT;
|
|
val = 0;
|
|
if (hac_get_codec_data(hac, reg, &val) != 0)
|
|
break;
|
|
}
|
|
|
|
return i ? val : ~0;
|
|
}
|
|
|
|
static void hac_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
|
|
unsigned short val)
|
|
{
|
|
int unit_id = 0 /* ac97->private_data */;
|
|
struct hac_priv *hac = &hac_cpu_data[unit_id];
|
|
unsigned int i, to;
|
|
/* write_codec_aux */
|
|
for (i = AC97_WRITE_RETRY; i; i--) {
|
|
/* send_write_request */
|
|
local_irq_disable();
|
|
HACREG(HACTSR) &= ~(TSR_CMDDMT | TSR_CMDAMT);
|
|
HACREG(HACCSDR) = (val << CSDR_SHIFT);
|
|
HACREG(HACCSAR) = (reg << CSAR_SHIFT) & (~CSAR_RD);
|
|
local_irq_enable();
|
|
|
|
/* poll-wait for CMDAMT and CMDDMT */
|
|
for (to = TMO_E1;
|
|
to && !(HACREG(HACTSR) & (TSR_CMDAMT|TSR_CMDDMT));
|
|
--to)
|
|
udelay(1);
|
|
|
|
HACREG(HACTSR) &= ~(TSR_CMDAMT | TSR_CMDDMT);
|
|
if (to)
|
|
break;
|
|
/* timeout, try again */
|
|
}
|
|
}
|
|
|
|
static unsigned short hac_ac97_read(struct snd_ac97 *ac97,
|
|
unsigned short reg)
|
|
{
|
|
int unit_id = 0 /* ac97->private_data */;
|
|
struct hac_priv *hac = &hac_cpu_data[unit_id];
|
|
return hac_read_codec_aux(hac, reg);
|
|
}
|
|
|
|
static void hac_ac97_warmrst(struct snd_ac97 *ac97)
|
|
{
|
|
int unit_id = 0 /* ac97->private_data */;
|
|
struct hac_priv *hac = &hac_cpu_data[unit_id];
|
|
unsigned int tmo;
|
|
|
|
HACREG(HACCR) = CR_WMRT | CR_ST | CR_B9;
|
|
msleep(10);
|
|
HACREG(HACCR) = CR_ST | CR_B9;
|
|
for (tmo = 1000; (tmo > 0) && !(HACREG(HACCR) & CR_CR); tmo--)
|
|
udelay(1);
|
|
|
|
if (!tmo)
|
|
printk(KERN_INFO "hac: reset: AC97 link down!\n");
|
|
/* settings this bit lets us have a conversation with codec */
|
|
HACREG(HACACR) |= ACR_TX12ATOM;
|
|
}
|
|
|
|
static void hac_ac97_coldrst(struct snd_ac97 *ac97)
|
|
{
|
|
int unit_id = 0 /* ac97->private_data */;
|
|
struct hac_priv *hac;
|
|
hac = &hac_cpu_data[unit_id];
|
|
|
|
HACREG(HACCR) = 0;
|
|
HACREG(HACCR) = CR_CDRT | CR_ST | CR_B9;
|
|
msleep(10);
|
|
hac_ac97_warmrst(ac97);
|
|
}
|
|
|
|
struct snd_ac97_bus_ops soc_ac97_ops = {
|
|
.read = hac_ac97_read,
|
|
.write = hac_ac97_write,
|
|
.reset = hac_ac97_coldrst,
|
|
.warm_reset = hac_ac97_warmrst,
|
|
};
|
|
EXPORT_SYMBOL_GPL(soc_ac97_ops);
|
|
|
|
static int hac_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct hac_priv *hac = &hac_cpu_data[dai->id];
|
|
int d = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0 : 1;
|
|
|
|
switch (params->msbits) {
|
|
case 16:
|
|
HACREG(HACACR) |= d ? ACR_DMARX16 : ACR_DMATX16;
|
|
HACREG(HACACR) &= d ? ~ACR_DMARX20 : ~ACR_DMATX20;
|
|
break;
|
|
case 20:
|
|
HACREG(HACACR) &= d ? ~ACR_DMARX16 : ~ACR_DMATX16;
|
|
HACREG(HACACR) |= d ? ACR_DMARX20 : ACR_DMATX20;
|
|
break;
|
|
default:
|
|
pr_debug("hac: invalid depth %d bit\n", params->msbits);
|
|
return -EINVAL;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define AC97_RATES \
|
|
SNDRV_PCM_RATE_8000_192000
|
|
|
|
#define AC97_FMTS \
|
|
SNDRV_PCM_FMTBIT_S16_LE
|
|
|
|
static struct snd_soc_dai_ops hac_dai_ops = {
|
|
.hw_params = hac_hw_params,
|
|
};
|
|
|
|
static struct snd_soc_dai_driver sh4_hac_dai[] = {
|
|
{
|
|
.name = "hac-dai.0",
|
|
.ac97_control = 1,
|
|
.playback = {
|
|
.rates = AC97_RATES,
|
|
.formats = AC97_FMTS,
|
|
.channels_min = 2,
|
|
.channels_max = 2,
|
|
},
|
|
.capture = {
|
|
.rates = AC97_RATES,
|
|
.formats = AC97_FMTS,
|
|
.channels_min = 2,
|
|
.channels_max = 2,
|
|
},
|
|
.ops = &hac_dai_ops,
|
|
},
|
|
#ifdef CONFIG_CPU_SUBTYPE_SH7760
|
|
{
|
|
.name = "hac-dai.1",
|
|
.id = 1,
|
|
.playback = {
|
|
.rates = AC97_RATES,
|
|
.formats = AC97_FMTS,
|
|
.channels_min = 2,
|
|
.channels_max = 2,
|
|
},
|
|
.capture = {
|
|
.rates = AC97_RATES,
|
|
.formats = AC97_FMTS,
|
|
.channels_min = 2,
|
|
.channels_max = 2,
|
|
},
|
|
.ops = &hac_dai_ops,
|
|
|
|
},
|
|
#endif
|
|
};
|
|
|
|
static int __devinit hac_soc_platform_probe(struct platform_device *pdev)
|
|
{
|
|
return snd_soc_register_dais(&pdev->dev, sh4_hac_dai,
|
|
ARRAY_SIZE(sh4_hac_dai));
|
|
}
|
|
|
|
static int __devexit hac_soc_platform_remove(struct platform_device *pdev)
|
|
{
|
|
snd_soc_unregister_dais(&pdev->dev, ARRAY_SIZE(sh4_hac_dai));
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver hac_pcm_driver = {
|
|
.driver = {
|
|
.name = "hac-pcm-audio",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
|
|
.probe = hac_soc_platform_probe,
|
|
.remove = __devexit_p(hac_soc_platform_remove),
|
|
};
|
|
|
|
static int __init sh4_hac_pcm_init(void)
|
|
{
|
|
return platform_driver_register(&hac_pcm_driver);
|
|
}
|
|
module_init(sh4_hac_pcm_init);
|
|
|
|
static void __exit sh4_hac_pcm_exit(void)
|
|
{
|
|
platform_driver_unregister(&hac_pcm_driver);
|
|
}
|
|
module_exit(sh4_hac_pcm_exit);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DESCRIPTION("SuperH onchip HAC (AC97) audio driver");
|
|
MODULE_AUTHOR("Manuel Lauss <mano@roarinelk.homelinux.net>");
|