mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-02 08:34:20 +08:00
0d7b101404
The mpc8xxx_wdt driver is using two registers: SWSRR to push magic numbers, and SWCRR to control the watchdog. Both registers are available on the MPC8xx, and seem to have the same offsets and semantics as in MPC83xx/MPC86xx watchdogs. The only difference is prescale value. So this driver simply works on the MPC8xx CPUs. One quirk is needed for the MPC8xx, though. It has small prescale value and slow CPU, so the watchdog resets board prior to the driver has time to load. To solve this we should split initialization in two steps: start ping the watchdog early, and register the watchdog userspace interface later. MPC823 seem to be the first CPU in MPC8xx line, so we use fsl,mpc823-wdt compatible matching. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Tested-by: Jochen Friedrich <jochen@scram.de> Cc: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
317 lines
7.8 KiB
C
317 lines
7.8 KiB
C
/*
|
|
* mpc8xxx_wdt.c - MPC8xx/MPC83xx/MPC86xx watchdog userspace interface
|
|
*
|
|
* Authors: Dave Updegraff <dave@cray.org>
|
|
* Kumar Gala <galak@kernel.crashing.org>
|
|
* Attribution: from 83xx_wst: Florian Schirmer <jolt@tuxbox.org>
|
|
* ..and from sc520_wdt
|
|
* Copyright (c) 2008 MontaVista Software, Inc.
|
|
* Anton Vorontsov <avorontsov@ru.mvista.com>
|
|
*
|
|
* Note: it appears that you can only actually ENABLE or DISABLE the thing
|
|
* once after POR. Once enabled, you cannot disable, and vice versa.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
#include <linux/fs.h>
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/miscdevice.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/module.h>
|
|
#include <linux/watchdog.h>
|
|
#include <linux/io.h>
|
|
#include <linux/uaccess.h>
|
|
#include <sysdev/fsl_soc.h>
|
|
|
|
struct mpc8xxx_wdt {
|
|
__be32 res0;
|
|
__be32 swcrr; /* System watchdog control register */
|
|
#define SWCRR_SWTC 0xFFFF0000 /* Software Watchdog Time Count. */
|
|
#define SWCRR_SWEN 0x00000004 /* Watchdog Enable bit. */
|
|
#define SWCRR_SWRI 0x00000002 /* Software Watchdog Reset/Interrupt Select bit.*/
|
|
#define SWCRR_SWPR 0x00000001 /* Software Watchdog Counter Prescale bit. */
|
|
__be32 swcnr; /* System watchdog count register */
|
|
u8 res1[2];
|
|
__be16 swsrr; /* System watchdog service register */
|
|
u8 res2[0xF0];
|
|
};
|
|
|
|
struct mpc8xxx_wdt_type {
|
|
int prescaler;
|
|
bool hw_enabled;
|
|
};
|
|
|
|
static struct mpc8xxx_wdt __iomem *wd_base;
|
|
|
|
static u16 timeout = 0xffff;
|
|
module_param(timeout, ushort, 0);
|
|
MODULE_PARM_DESC(timeout,
|
|
"Watchdog timeout in ticks. (0<timeout<65536, default=65535");
|
|
|
|
static int reset = 1;
|
|
module_param(reset, bool, 0);
|
|
MODULE_PARM_DESC(reset,
|
|
"Watchdog Interrupt/Reset Mode. 0 = interrupt, 1 = reset");
|
|
|
|
static int nowayout = WATCHDOG_NOWAYOUT;
|
|
module_param(nowayout, int, 0);
|
|
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started "
|
|
"(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
|
|
|
|
/*
|
|
* We always prescale, but if someone really doesn't want to they can set this
|
|
* to 0
|
|
*/
|
|
static int prescale = 1;
|
|
static unsigned int timeout_sec;
|
|
|
|
static unsigned long wdt_is_open;
|
|
static DEFINE_SPINLOCK(wdt_spinlock);
|
|
|
|
static void mpc8xxx_wdt_keepalive(void)
|
|
{
|
|
/* Ping the WDT */
|
|
spin_lock(&wdt_spinlock);
|
|
out_be16(&wd_base->swsrr, 0x556c);
|
|
out_be16(&wd_base->swsrr, 0xaa39);
|
|
spin_unlock(&wdt_spinlock);
|
|
}
|
|
|
|
static void mpc8xxx_wdt_timer_ping(unsigned long arg);
|
|
static DEFINE_TIMER(wdt_timer, mpc8xxx_wdt_timer_ping, 0, 0);
|
|
|
|
static void mpc8xxx_wdt_timer_ping(unsigned long arg)
|
|
{
|
|
mpc8xxx_wdt_keepalive();
|
|
/* We're pinging it twice faster than needed, just to be sure. */
|
|
mod_timer(&wdt_timer, jiffies + HZ * timeout_sec / 2);
|
|
}
|
|
|
|
static void mpc8xxx_wdt_pr_warn(const char *msg)
|
|
{
|
|
pr_crit("mpc8xxx_wdt: %s, expect the %s soon!\n", msg,
|
|
reset ? "reset" : "machine check exception");
|
|
}
|
|
|
|
static ssize_t mpc8xxx_wdt_write(struct file *file, const char __user *buf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
if (count)
|
|
mpc8xxx_wdt_keepalive();
|
|
return count;
|
|
}
|
|
|
|
static int mpc8xxx_wdt_open(struct inode *inode, struct file *file)
|
|
{
|
|
u32 tmp = SWCRR_SWEN;
|
|
if (test_and_set_bit(0, &wdt_is_open))
|
|
return -EBUSY;
|
|
|
|
/* Once we start the watchdog we can't stop it */
|
|
if (nowayout)
|
|
__module_get(THIS_MODULE);
|
|
|
|
/* Good, fire up the show */
|
|
if (prescale)
|
|
tmp |= SWCRR_SWPR;
|
|
if (reset)
|
|
tmp |= SWCRR_SWRI;
|
|
|
|
tmp |= timeout << 16;
|
|
|
|
out_be32(&wd_base->swcrr, tmp);
|
|
|
|
del_timer_sync(&wdt_timer);
|
|
|
|
return nonseekable_open(inode, file);
|
|
}
|
|
|
|
static int mpc8xxx_wdt_release(struct inode *inode, struct file *file)
|
|
{
|
|
if (!nowayout)
|
|
mpc8xxx_wdt_timer_ping(0);
|
|
else
|
|
mpc8xxx_wdt_pr_warn("watchdog closed");
|
|
clear_bit(0, &wdt_is_open);
|
|
return 0;
|
|
}
|
|
|
|
static long mpc8xxx_wdt_ioctl(struct file *file, unsigned int cmd,
|
|
unsigned long arg)
|
|
{
|
|
void __user *argp = (void __user *)arg;
|
|
int __user *p = argp;
|
|
static struct watchdog_info ident = {
|
|
.options = WDIOF_KEEPALIVEPING,
|
|
.firmware_version = 1,
|
|
.identity = "MPC8xxx",
|
|
};
|
|
|
|
switch (cmd) {
|
|
case WDIOC_GETSUPPORT:
|
|
return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
|
|
case WDIOC_GETSTATUS:
|
|
case WDIOC_GETBOOTSTATUS:
|
|
return put_user(0, p);
|
|
case WDIOC_KEEPALIVE:
|
|
mpc8xxx_wdt_keepalive();
|
|
return 0;
|
|
case WDIOC_GETTIMEOUT:
|
|
return put_user(timeout_sec, p);
|
|
default:
|
|
return -ENOTTY;
|
|
}
|
|
}
|
|
|
|
static const struct file_operations mpc8xxx_wdt_fops = {
|
|
.owner = THIS_MODULE,
|
|
.llseek = no_llseek,
|
|
.write = mpc8xxx_wdt_write,
|
|
.unlocked_ioctl = mpc8xxx_wdt_ioctl,
|
|
.open = mpc8xxx_wdt_open,
|
|
.release = mpc8xxx_wdt_release,
|
|
};
|
|
|
|
static struct miscdevice mpc8xxx_wdt_miscdev = {
|
|
.minor = WATCHDOG_MINOR,
|
|
.name = "watchdog",
|
|
.fops = &mpc8xxx_wdt_fops,
|
|
};
|
|
|
|
static int __devinit mpc8xxx_wdt_probe(struct of_device *ofdev,
|
|
const struct of_device_id *match)
|
|
{
|
|
int ret;
|
|
struct device_node *np = ofdev->node;
|
|
struct mpc8xxx_wdt_type *wdt_type = match->data;
|
|
u32 freq = fsl_get_sys_freq();
|
|
bool enabled;
|
|
|
|
if (!freq || freq == -1)
|
|
return -EINVAL;
|
|
|
|
wd_base = of_iomap(np, 0);
|
|
if (!wd_base)
|
|
return -ENOMEM;
|
|
|
|
enabled = in_be32(&wd_base->swcrr) & SWCRR_SWEN;
|
|
if (!enabled && wdt_type->hw_enabled) {
|
|
pr_info("mpc8xxx_wdt: could not be enabled in software\n");
|
|
ret = -ENOSYS;
|
|
goto err_unmap;
|
|
}
|
|
|
|
/* Calculate the timeout in seconds */
|
|
if (prescale)
|
|
timeout_sec = (timeout * wdt_type->prescaler) / freq;
|
|
else
|
|
timeout_sec = timeout / freq;
|
|
|
|
pr_info("WDT driver for MPC8xxx initialized. mode:%s timeout=%d "
|
|
"(%d seconds)\n", reset ? "reset" : "interrupt", timeout,
|
|
timeout_sec);
|
|
|
|
/*
|
|
* If the watchdog was previously enabled or we're running on
|
|
* MPC8xxx, we should ping the wdt from the kernel until the
|
|
* userspace handles it.
|
|
*/
|
|
if (enabled)
|
|
mpc8xxx_wdt_timer_ping(0);
|
|
return 0;
|
|
err_unmap:
|
|
iounmap(wd_base);
|
|
wd_base = NULL;
|
|
return ret;
|
|
}
|
|
|
|
static int __devexit mpc8xxx_wdt_remove(struct of_device *ofdev)
|
|
{
|
|
mpc8xxx_wdt_pr_warn("watchdog removed");
|
|
del_timer_sync(&wdt_timer);
|
|
misc_deregister(&mpc8xxx_wdt_miscdev);
|
|
iounmap(wd_base);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id mpc8xxx_wdt_match[] = {
|
|
{
|
|
.compatible = "mpc83xx_wdt",
|
|
.data = &(struct mpc8xxx_wdt_type) {
|
|
.prescaler = 0x10000,
|
|
},
|
|
},
|
|
{
|
|
.compatible = "fsl,mpc8610-wdt",
|
|
.data = &(struct mpc8xxx_wdt_type) {
|
|
.prescaler = 0x10000,
|
|
.hw_enabled = true,
|
|
},
|
|
},
|
|
{
|
|
.compatible = "fsl,mpc823-wdt",
|
|
.data = &(struct mpc8xxx_wdt_type) {
|
|
.prescaler = 0x800,
|
|
},
|
|
},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mpc8xxx_wdt_match);
|
|
|
|
static struct of_platform_driver mpc8xxx_wdt_driver = {
|
|
.match_table = mpc8xxx_wdt_match,
|
|
.probe = mpc8xxx_wdt_probe,
|
|
.remove = __devexit_p(mpc8xxx_wdt_remove),
|
|
.driver = {
|
|
.name = "mpc8xxx_wdt",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
};
|
|
|
|
/*
|
|
* We do wdt initialization in two steps: arch_initcall probes the wdt
|
|
* very early to start pinging the watchdog (misc devices are not yet
|
|
* available), and later module_init() just registers the misc device.
|
|
*/
|
|
static int __init mpc8xxx_wdt_init_late(void)
|
|
{
|
|
int ret;
|
|
|
|
if (!wd_base)
|
|
return -ENODEV;
|
|
|
|
ret = misc_register(&mpc8xxx_wdt_miscdev);
|
|
if (ret) {
|
|
pr_err("cannot register miscdev on minor=%d (err=%d)\n",
|
|
WATCHDOG_MINOR, ret);
|
|
return ret;
|
|
}
|
|
return 0;
|
|
}
|
|
module_init(mpc8xxx_wdt_init_late);
|
|
|
|
static int __init mpc8xxx_wdt_init(void)
|
|
{
|
|
return of_register_platform_driver(&mpc8xxx_wdt_driver);
|
|
}
|
|
arch_initcall(mpc8xxx_wdt_init);
|
|
|
|
static void __exit mpc8xxx_wdt_exit(void)
|
|
{
|
|
of_unregister_platform_driver(&mpc8xxx_wdt_driver);
|
|
}
|
|
module_exit(mpc8xxx_wdt_exit);
|
|
|
|
MODULE_AUTHOR("Dave Updegraff, Kumar Gala");
|
|
MODULE_DESCRIPTION("Driver for watchdog timer in MPC8xx/MPC83xx/MPC86xx "
|
|
"uProcessors");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
|