mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-20 01:24:39 +08:00
133bf90dbb
As explained in ieee80211_delayed_tailroom_dec(), during roam, keys of the old AP will be destroyed and new keys will be installed. Deletion of the old key causes crypto_tx_tailroom_needed_cnt to go from 1 to 0 and the new key installation causes a transition from 0 to 1. Whenever crypto_tx_tailroom_needed_cnt transitions from 0 to 1, we invoke synchronize_net(); the reason for doing this is to avoid a race in the TX path as explained in increment_tailroom_need_count(). This synchronize_net() operation can be slow and can affect the station roam time. To avoid this, decrementing the crypto_tx_tailroom_needed_cnt is delayed for a while so that upon installation of new key the transition would be from 1 to 2 instead of 0 to 1 and thereby improving the roam time. This is all correct for a STA iftype, but deferring the tailroom_needed decrement for other iftypes may be unnecessary. For example, let's consider the case of a 4-addr client connecting to an AP for which AP_VLAN interface is also created, let the initial value for tailroom_needed on the AP be 1. * 4-addr client connects to the AP (AP: tailroom_needed = 1) * AP will clear old keys, delay decrement of tailroom_needed count * AP_VLAN is created, it takes the tailroom count from master (AP_VLAN: tailroom_needed = 1, AP: tailroom_needed = 1) * Install new key for the station, assume key is plumbed in the HW, there won't be any change in tailroom_needed count on AP iface * Delayed decrement of tailroom_needed count on AP (AP: tailroom_needed = 0, AP_VLAN: tailroom_needed = 1) Because of the delayed decrement on AP iface, tailroom_needed count goes out of sync between AP(master iface) and AP_VLAN(slave iface) and there would be unnecessary tailroom created for the packets going through AP_VLAN iface. Also, WARN_ONs were observed while trying to bring down the AP_VLAN interface: (warn_slowpath_common) (warn_slowpath_null+0x18/0x20) (warn_slowpath_null) (ieee80211_free_keys+0x114/0x1e4) (ieee80211_free_keys) (ieee80211_del_virtual_monitor+0x51c/0x850) (ieee80211_del_virtual_monitor) (ieee80211_stop+0x30/0x3c) (ieee80211_stop) (__dev_close_many+0x94/0xb8) (__dev_close_many) (dev_close_many+0x5c/0xc8) Restricting delayed decrement to station interface alone fixes the problem and it makes sense to do so because delayed decrement is done to improve roam time which is applicable only for client devices. Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
---|---|---|
.. | ||
aead_api.c | ||
aead_api.h | ||
aes_ccm.h | ||
aes_cmac.c | ||
aes_cmac.h | ||
aes_gcm.h | ||
aes_gmac.c | ||
aes_gmac.h | ||
agg-rx.c | ||
agg-tx.c | ||
cfg.c | ||
chan.c | ||
debug.h | ||
debugfs_key.c | ||
debugfs_key.h | ||
debugfs_netdev.c | ||
debugfs_netdev.h | ||
debugfs_sta.c | ||
debugfs_sta.h | ||
debugfs.c | ||
debugfs.h | ||
driver-ops.c | ||
driver-ops.h | ||
ethtool.c | ||
fils_aead.c | ||
fils_aead.h | ||
he.c | ||
ht.c | ||
ibss.c | ||
ieee80211_i.h | ||
iface.c | ||
Kconfig | ||
key.c | ||
key.h | ||
led.c | ||
led.h | ||
main.c | ||
Makefile | ||
mesh_hwmp.c | ||
mesh_pathtbl.c | ||
mesh_plink.c | ||
mesh_ps.c | ||
mesh_sync.c | ||
mesh.c | ||
mesh.h | ||
michael.c | ||
michael.h | ||
mlme.c | ||
ocb.c | ||
offchannel.c | ||
pm.c | ||
rate.c | ||
rate.h | ||
rc80211_minstrel_debugfs.c | ||
rc80211_minstrel_ht_debugfs.c | ||
rc80211_minstrel_ht.c | ||
rc80211_minstrel_ht.h | ||
rc80211_minstrel.c | ||
rc80211_minstrel.h | ||
rx.c | ||
scan.c | ||
spectmgmt.c | ||
sta_info.c | ||
sta_info.h | ||
status.c | ||
tdls.c | ||
tkip.c | ||
tkip.h | ||
trace_msg.h | ||
trace.c | ||
trace.h | ||
tx.c | ||
util.c | ||
vht.c | ||
wep.c | ||
wep.h | ||
wme.c | ||
wme.h | ||
wpa.c | ||
wpa.h |