mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-16 08:44:21 +08:00
48ea2cedde
Pull SCSI target updates from Nicholas Bellinger: "It's been usually busy for summer, with most of the efforts centered around TCMU developments and various target-core + fabric driver bug fixing activities. Not particularly large in terms of LoC, but lots of smaller patches from many different folks. The highlights include: - ibmvscsis logical partition manager support (Michael Cyr + Bryant Ly) - Convert target/iblock WRITE_SAME to blkdev_issue_zeroout (hch + nab) - Add support for TMR percpu LUN reference counting (nab) - Fix a potential deadlock between EXTENDED_COPY and iscsi shutdown (Bart) - Fix COMPARE_AND_WRITE caw_sem leak during se_cmd quiesce (Jiang Yi) - Fix TMCU module removal (Xiubo Li) - Fix iser-target OOPs during login failure (Andrea Righi + Sagi) - Breakup target-core free_device backend driver callback (mnc) - Perform TCMU add/delete/reconfig synchronously (mnc) - Fix TCMU multiple UIO open/close sequences (mnc) - Fix TCMU CHECK_CONDITION sense handling (mnc) - Fix target-core SAM_STAT_BUSY + TASK_SET_FULL handling (mnc + nab) - Introduce TYPE_ZBC support in PSCSI (Damien Le Moal) - Fix possible TCMU memory leak + OOPs when recalculating cmd base size (Xiubo Li + Bryant Ly + Damien Le Moal + mnc) - Add login_keys_workaround attribute for non RFC initiators (Robert LeBlanc + Arun Easi + nab)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (68 commits) iscsi-target: Add login_keys_workaround attribute for non RFC initiators Revert "qla2xxx: Fix incorrect tcm_qla2xxx_free_cmd use during TMR ABORT" tcmu: clean up the code and with one small fix tcmu: Fix possbile memory leak / OOPs when recalculating cmd base size target: export lio pgr/alua support as device attr target: Fix return sense reason in target_scsi3_emulate_pr_out target: Fix cmd size for PR-OUT in passthrough_parse_cdb tcmu: Fix dev_config_store target: pscsi: Introduce TYPE_ZBC support target: Use macro for WRITE_VERIFY_32 operation codes target: fix SAM_STAT_BUSY/TASK_SET_FULL handling target: remove transport_complete pscsi: finish cmd processing from pscsi_req_done tcmu: fix sense handling during completion target: add helper to copy sense to se_cmd buffer target: do not require a transport_complete for SCF_TRANSPORT_TASK_SENSE target: make device_mutex and device_list static tcmu: Fix flushing cmd entry dcache page tcmu: fix multiple uio open/close sequences tcmu: drop configured check in destroy ...
1115 lines
28 KiB
C
1115 lines
28 KiB
C
/*******************************************************************************
|
|
* Filename: target_core_pscsi.c
|
|
*
|
|
* This file contains the generic target mode <-> Linux SCSI subsystem plugin.
|
|
*
|
|
* (c) Copyright 2003-2013 Datera, Inc.
|
|
*
|
|
* Nicholas A. Bellinger <nab@kernel.org>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
|
*
|
|
******************************************************************************/
|
|
|
|
#include <linux/string.h>
|
|
#include <linux/parser.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/blk_types.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/genhd.h>
|
|
#include <linux/cdrom.h>
|
|
#include <linux/ratelimit.h>
|
|
#include <linux/module.h>
|
|
#include <asm/unaligned.h>
|
|
|
|
#include <scsi/scsi_device.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <scsi/scsi_tcq.h>
|
|
|
|
#include <target/target_core_base.h>
|
|
#include <target/target_core_backend.h>
|
|
|
|
#include "target_core_alua.h"
|
|
#include "target_core_internal.h"
|
|
#include "target_core_pscsi.h"
|
|
|
|
#define ISPRINT(a) ((a >= ' ') && (a <= '~'))
|
|
|
|
static inline struct pscsi_dev_virt *PSCSI_DEV(struct se_device *dev)
|
|
{
|
|
return container_of(dev, struct pscsi_dev_virt, dev);
|
|
}
|
|
|
|
static sense_reason_t pscsi_execute_cmd(struct se_cmd *cmd);
|
|
static void pscsi_req_done(struct request *, blk_status_t);
|
|
|
|
/* pscsi_attach_hba():
|
|
*
|
|
* pscsi_get_sh() used scsi_host_lookup() to locate struct Scsi_Host.
|
|
* from the passed SCSI Host ID.
|
|
*/
|
|
static int pscsi_attach_hba(struct se_hba *hba, u32 host_id)
|
|
{
|
|
struct pscsi_hba_virt *phv;
|
|
|
|
phv = kzalloc(sizeof(struct pscsi_hba_virt), GFP_KERNEL);
|
|
if (!phv) {
|
|
pr_err("Unable to allocate struct pscsi_hba_virt\n");
|
|
return -ENOMEM;
|
|
}
|
|
phv->phv_host_id = host_id;
|
|
phv->phv_mode = PHV_VIRTUAL_HOST_ID;
|
|
|
|
hba->hba_ptr = phv;
|
|
|
|
pr_debug("CORE_HBA[%d] - TCM SCSI HBA Driver %s on"
|
|
" Generic Target Core Stack %s\n", hba->hba_id,
|
|
PSCSI_VERSION, TARGET_CORE_VERSION);
|
|
pr_debug("CORE_HBA[%d] - Attached SCSI HBA to Generic\n",
|
|
hba->hba_id);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void pscsi_detach_hba(struct se_hba *hba)
|
|
{
|
|
struct pscsi_hba_virt *phv = hba->hba_ptr;
|
|
struct Scsi_Host *scsi_host = phv->phv_lld_host;
|
|
|
|
if (scsi_host) {
|
|
scsi_host_put(scsi_host);
|
|
|
|
pr_debug("CORE_HBA[%d] - Detached SCSI HBA: %s from"
|
|
" Generic Target Core\n", hba->hba_id,
|
|
(scsi_host->hostt->name) ? (scsi_host->hostt->name) :
|
|
"Unknown");
|
|
} else
|
|
pr_debug("CORE_HBA[%d] - Detached Virtual SCSI HBA"
|
|
" from Generic Target Core\n", hba->hba_id);
|
|
|
|
kfree(phv);
|
|
hba->hba_ptr = NULL;
|
|
}
|
|
|
|
static int pscsi_pmode_enable_hba(struct se_hba *hba, unsigned long mode_flag)
|
|
{
|
|
struct pscsi_hba_virt *phv = hba->hba_ptr;
|
|
struct Scsi_Host *sh = phv->phv_lld_host;
|
|
/*
|
|
* Release the struct Scsi_Host
|
|
*/
|
|
if (!mode_flag) {
|
|
if (!sh)
|
|
return 0;
|
|
|
|
phv->phv_lld_host = NULL;
|
|
phv->phv_mode = PHV_VIRTUAL_HOST_ID;
|
|
|
|
pr_debug("CORE_HBA[%d] - Disabled pSCSI HBA Passthrough"
|
|
" %s\n", hba->hba_id, (sh->hostt->name) ?
|
|
(sh->hostt->name) : "Unknown");
|
|
|
|
scsi_host_put(sh);
|
|
return 0;
|
|
}
|
|
/*
|
|
* Otherwise, locate struct Scsi_Host from the original passed
|
|
* pSCSI Host ID and enable for phba mode
|
|
*/
|
|
sh = scsi_host_lookup(phv->phv_host_id);
|
|
if (!sh) {
|
|
pr_err("pSCSI: Unable to locate SCSI Host for"
|
|
" phv_host_id: %d\n", phv->phv_host_id);
|
|
return -EINVAL;
|
|
}
|
|
|
|
phv->phv_lld_host = sh;
|
|
phv->phv_mode = PHV_LLD_SCSI_HOST_NO;
|
|
|
|
pr_debug("CORE_HBA[%d] - Enabled pSCSI HBA Passthrough %s\n",
|
|
hba->hba_id, (sh->hostt->name) ? (sh->hostt->name) : "Unknown");
|
|
|
|
return 1;
|
|
}
|
|
|
|
static void pscsi_tape_read_blocksize(struct se_device *dev,
|
|
struct scsi_device *sdev)
|
|
{
|
|
unsigned char cdb[MAX_COMMAND_SIZE], *buf;
|
|
int ret;
|
|
|
|
buf = kzalloc(12, GFP_KERNEL);
|
|
if (!buf)
|
|
goto out_free;
|
|
|
|
memset(cdb, 0, MAX_COMMAND_SIZE);
|
|
cdb[0] = MODE_SENSE;
|
|
cdb[4] = 0x0c; /* 12 bytes */
|
|
|
|
ret = scsi_execute_req(sdev, cdb, DMA_FROM_DEVICE, buf, 12, NULL,
|
|
HZ, 1, NULL);
|
|
if (ret)
|
|
goto out_free;
|
|
|
|
/*
|
|
* If MODE_SENSE still returns zero, set the default value to 1024.
|
|
*/
|
|
sdev->sector_size = get_unaligned_be24(&buf[9]);
|
|
out_free:
|
|
if (!sdev->sector_size)
|
|
sdev->sector_size = 1024;
|
|
|
|
kfree(buf);
|
|
}
|
|
|
|
static void
|
|
pscsi_set_inquiry_info(struct scsi_device *sdev, struct t10_wwn *wwn)
|
|
{
|
|
unsigned char *buf;
|
|
|
|
if (sdev->inquiry_len < INQUIRY_LEN)
|
|
return;
|
|
|
|
buf = sdev->inquiry;
|
|
if (!buf)
|
|
return;
|
|
/*
|
|
* Use sdev->inquiry from drivers/scsi/scsi_scan.c:scsi_alloc_sdev()
|
|
*/
|
|
memcpy(&wwn->vendor[0], &buf[8], sizeof(wwn->vendor));
|
|
memcpy(&wwn->model[0], &buf[16], sizeof(wwn->model));
|
|
memcpy(&wwn->revision[0], &buf[32], sizeof(wwn->revision));
|
|
}
|
|
|
|
static int
|
|
pscsi_get_inquiry_vpd_serial(struct scsi_device *sdev, struct t10_wwn *wwn)
|
|
{
|
|
unsigned char cdb[MAX_COMMAND_SIZE], *buf;
|
|
int ret;
|
|
|
|
buf = kzalloc(INQUIRY_VPD_SERIAL_LEN, GFP_KERNEL);
|
|
if (!buf)
|
|
return -ENOMEM;
|
|
|
|
memset(cdb, 0, MAX_COMMAND_SIZE);
|
|
cdb[0] = INQUIRY;
|
|
cdb[1] = 0x01; /* Query VPD */
|
|
cdb[2] = 0x80; /* Unit Serial Number */
|
|
put_unaligned_be16(INQUIRY_VPD_SERIAL_LEN, &cdb[3]);
|
|
|
|
ret = scsi_execute_req(sdev, cdb, DMA_FROM_DEVICE, buf,
|
|
INQUIRY_VPD_SERIAL_LEN, NULL, HZ, 1, NULL);
|
|
if (ret)
|
|
goto out_free;
|
|
|
|
snprintf(&wwn->unit_serial[0], INQUIRY_VPD_SERIAL_LEN, "%s", &buf[4]);
|
|
|
|
wwn->t10_dev->dev_flags |= DF_FIRMWARE_VPD_UNIT_SERIAL;
|
|
|
|
kfree(buf);
|
|
return 0;
|
|
|
|
out_free:
|
|
kfree(buf);
|
|
return -EPERM;
|
|
}
|
|
|
|
static void
|
|
pscsi_get_inquiry_vpd_device_ident(struct scsi_device *sdev,
|
|
struct t10_wwn *wwn)
|
|
{
|
|
unsigned char cdb[MAX_COMMAND_SIZE], *buf, *page_83;
|
|
int ident_len, page_len, off = 4, ret;
|
|
struct t10_vpd *vpd;
|
|
|
|
buf = kzalloc(INQUIRY_VPD_SERIAL_LEN, GFP_KERNEL);
|
|
if (!buf)
|
|
return;
|
|
|
|
memset(cdb, 0, MAX_COMMAND_SIZE);
|
|
cdb[0] = INQUIRY;
|
|
cdb[1] = 0x01; /* Query VPD */
|
|
cdb[2] = 0x83; /* Device Identifier */
|
|
put_unaligned_be16(INQUIRY_VPD_DEVICE_IDENTIFIER_LEN, &cdb[3]);
|
|
|
|
ret = scsi_execute_req(sdev, cdb, DMA_FROM_DEVICE, buf,
|
|
INQUIRY_VPD_DEVICE_IDENTIFIER_LEN,
|
|
NULL, HZ, 1, NULL);
|
|
if (ret)
|
|
goto out;
|
|
|
|
page_len = get_unaligned_be16(&buf[2]);
|
|
while (page_len > 0) {
|
|
/* Grab a pointer to the Identification descriptor */
|
|
page_83 = &buf[off];
|
|
ident_len = page_83[3];
|
|
if (!ident_len) {
|
|
pr_err("page_83[3]: identifier"
|
|
" length zero!\n");
|
|
break;
|
|
}
|
|
pr_debug("T10 VPD Identifier Length: %d\n", ident_len);
|
|
|
|
vpd = kzalloc(sizeof(struct t10_vpd), GFP_KERNEL);
|
|
if (!vpd) {
|
|
pr_err("Unable to allocate memory for"
|
|
" struct t10_vpd\n");
|
|
goto out;
|
|
}
|
|
INIT_LIST_HEAD(&vpd->vpd_list);
|
|
|
|
transport_set_vpd_proto_id(vpd, page_83);
|
|
transport_set_vpd_assoc(vpd, page_83);
|
|
|
|
if (transport_set_vpd_ident_type(vpd, page_83) < 0) {
|
|
off += (ident_len + 4);
|
|
page_len -= (ident_len + 4);
|
|
kfree(vpd);
|
|
continue;
|
|
}
|
|
if (transport_set_vpd_ident(vpd, page_83) < 0) {
|
|
off += (ident_len + 4);
|
|
page_len -= (ident_len + 4);
|
|
kfree(vpd);
|
|
continue;
|
|
}
|
|
|
|
list_add_tail(&vpd->vpd_list, &wwn->t10_vpd_list);
|
|
off += (ident_len + 4);
|
|
page_len -= (ident_len + 4);
|
|
}
|
|
|
|
out:
|
|
kfree(buf);
|
|
}
|
|
|
|
static int pscsi_add_device_to_list(struct se_device *dev,
|
|
struct scsi_device *sd)
|
|
{
|
|
struct pscsi_dev_virt *pdv = PSCSI_DEV(dev);
|
|
struct request_queue *q = sd->request_queue;
|
|
|
|
pdv->pdv_sd = sd;
|
|
|
|
if (!sd->queue_depth) {
|
|
sd->queue_depth = PSCSI_DEFAULT_QUEUEDEPTH;
|
|
|
|
pr_err("Set broken SCSI Device %d:%d:%llu"
|
|
" queue_depth to %d\n", sd->channel, sd->id,
|
|
sd->lun, sd->queue_depth);
|
|
}
|
|
|
|
dev->dev_attrib.hw_block_size =
|
|
min_not_zero((int)sd->sector_size, 512);
|
|
dev->dev_attrib.hw_max_sectors =
|
|
min_not_zero(sd->host->max_sectors, queue_max_hw_sectors(q));
|
|
dev->dev_attrib.hw_queue_depth = sd->queue_depth;
|
|
|
|
/*
|
|
* Setup our standard INQUIRY info into se_dev->t10_wwn
|
|
*/
|
|
pscsi_set_inquiry_info(sd, &dev->t10_wwn);
|
|
|
|
/*
|
|
* Locate VPD WWN Information used for various purposes within
|
|
* the Storage Engine.
|
|
*/
|
|
if (!pscsi_get_inquiry_vpd_serial(sd, &dev->t10_wwn)) {
|
|
/*
|
|
* If VPD Unit Serial returned GOOD status, try
|
|
* VPD Device Identification page (0x83).
|
|
*/
|
|
pscsi_get_inquiry_vpd_device_ident(sd, &dev->t10_wwn);
|
|
}
|
|
|
|
/*
|
|
* For TYPE_TAPE, attempt to determine blocksize with MODE_SENSE.
|
|
*/
|
|
if (sd->type == TYPE_TAPE) {
|
|
pscsi_tape_read_blocksize(dev, sd);
|
|
dev->dev_attrib.hw_block_size = sd->sector_size;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static struct se_device *pscsi_alloc_device(struct se_hba *hba,
|
|
const char *name)
|
|
{
|
|
struct pscsi_dev_virt *pdv;
|
|
|
|
pdv = kzalloc(sizeof(struct pscsi_dev_virt), GFP_KERNEL);
|
|
if (!pdv) {
|
|
pr_err("Unable to allocate memory for struct pscsi_dev_virt\n");
|
|
return NULL;
|
|
}
|
|
|
|
pr_debug("PSCSI: Allocated pdv: %p for %s\n", pdv, name);
|
|
return &pdv->dev;
|
|
}
|
|
|
|
/*
|
|
* Called with struct Scsi_Host->host_lock called.
|
|
*/
|
|
static int pscsi_create_type_disk(struct se_device *dev, struct scsi_device *sd)
|
|
__releases(sh->host_lock)
|
|
{
|
|
struct pscsi_hba_virt *phv = dev->se_hba->hba_ptr;
|
|
struct pscsi_dev_virt *pdv = PSCSI_DEV(dev);
|
|
struct Scsi_Host *sh = sd->host;
|
|
struct block_device *bd;
|
|
int ret;
|
|
|
|
if (scsi_device_get(sd)) {
|
|
pr_err("scsi_device_get() failed for %d:%d:%d:%llu\n",
|
|
sh->host_no, sd->channel, sd->id, sd->lun);
|
|
spin_unlock_irq(sh->host_lock);
|
|
return -EIO;
|
|
}
|
|
spin_unlock_irq(sh->host_lock);
|
|
/*
|
|
* Claim exclusive struct block_device access to struct scsi_device
|
|
* for TYPE_DISK and TYPE_ZBC using supplied udev_path
|
|
*/
|
|
bd = blkdev_get_by_path(dev->udev_path,
|
|
FMODE_WRITE|FMODE_READ|FMODE_EXCL, pdv);
|
|
if (IS_ERR(bd)) {
|
|
pr_err("pSCSI: blkdev_get_by_path() failed\n");
|
|
scsi_device_put(sd);
|
|
return PTR_ERR(bd);
|
|
}
|
|
pdv->pdv_bd = bd;
|
|
|
|
ret = pscsi_add_device_to_list(dev, sd);
|
|
if (ret) {
|
|
blkdev_put(pdv->pdv_bd, FMODE_WRITE|FMODE_READ|FMODE_EXCL);
|
|
scsi_device_put(sd);
|
|
return ret;
|
|
}
|
|
|
|
pr_debug("CORE_PSCSI[%d] - Added TYPE_%s for %d:%d:%d:%llu\n",
|
|
phv->phv_host_id, sd->type == TYPE_DISK ? "DISK" : "ZBC",
|
|
sh->host_no, sd->channel, sd->id, sd->lun);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Called with struct Scsi_Host->host_lock called.
|
|
*/
|
|
static int pscsi_create_type_nondisk(struct se_device *dev, struct scsi_device *sd)
|
|
__releases(sh->host_lock)
|
|
{
|
|
struct pscsi_hba_virt *phv = dev->se_hba->hba_ptr;
|
|
struct Scsi_Host *sh = sd->host;
|
|
int ret;
|
|
|
|
if (scsi_device_get(sd)) {
|
|
pr_err("scsi_device_get() failed for %d:%d:%d:%llu\n",
|
|
sh->host_no, sd->channel, sd->id, sd->lun);
|
|
spin_unlock_irq(sh->host_lock);
|
|
return -EIO;
|
|
}
|
|
spin_unlock_irq(sh->host_lock);
|
|
|
|
ret = pscsi_add_device_to_list(dev, sd);
|
|
if (ret) {
|
|
scsi_device_put(sd);
|
|
return ret;
|
|
}
|
|
pr_debug("CORE_PSCSI[%d] - Added Type: %s for %d:%d:%d:%llu\n",
|
|
phv->phv_host_id, scsi_device_type(sd->type), sh->host_no,
|
|
sd->channel, sd->id, sd->lun);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pscsi_configure_device(struct se_device *dev)
|
|
{
|
|
struct se_hba *hba = dev->se_hba;
|
|
struct pscsi_dev_virt *pdv = PSCSI_DEV(dev);
|
|
struct scsi_device *sd;
|
|
struct pscsi_hba_virt *phv = dev->se_hba->hba_ptr;
|
|
struct Scsi_Host *sh = phv->phv_lld_host;
|
|
int legacy_mode_enable = 0;
|
|
int ret;
|
|
|
|
if (!(pdv->pdv_flags & PDF_HAS_CHANNEL_ID) ||
|
|
!(pdv->pdv_flags & PDF_HAS_TARGET_ID) ||
|
|
!(pdv->pdv_flags & PDF_HAS_LUN_ID)) {
|
|
pr_err("Missing scsi_channel_id=, scsi_target_id= and"
|
|
" scsi_lun_id= parameters\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* If not running in PHV_LLD_SCSI_HOST_NO mode, locate the
|
|
* struct Scsi_Host we will need to bring the TCM/pSCSI object online
|
|
*/
|
|
if (!sh) {
|
|
if (phv->phv_mode == PHV_LLD_SCSI_HOST_NO) {
|
|
pr_err("pSCSI: Unable to locate struct"
|
|
" Scsi_Host for PHV_LLD_SCSI_HOST_NO\n");
|
|
return -ENODEV;
|
|
}
|
|
/*
|
|
* For the newer PHV_VIRTUAL_HOST_ID struct scsi_device
|
|
* reference, we enforce that udev_path has been set
|
|
*/
|
|
if (!(dev->dev_flags & DF_USING_UDEV_PATH)) {
|
|
pr_err("pSCSI: udev_path attribute has not"
|
|
" been set before ENABLE=1\n");
|
|
return -EINVAL;
|
|
}
|
|
/*
|
|
* If no scsi_host_id= was passed for PHV_VIRTUAL_HOST_ID,
|
|
* use the original TCM hba ID to reference Linux/SCSI Host No
|
|
* and enable for PHV_LLD_SCSI_HOST_NO mode.
|
|
*/
|
|
if (!(pdv->pdv_flags & PDF_HAS_VIRT_HOST_ID)) {
|
|
if (hba->dev_count) {
|
|
pr_err("pSCSI: Unable to set hba_mode"
|
|
" with active devices\n");
|
|
return -EEXIST;
|
|
}
|
|
|
|
if (pscsi_pmode_enable_hba(hba, 1) != 1)
|
|
return -ENODEV;
|
|
|
|
legacy_mode_enable = 1;
|
|
hba->hba_flags |= HBA_FLAGS_PSCSI_MODE;
|
|
sh = phv->phv_lld_host;
|
|
} else {
|
|
sh = scsi_host_lookup(pdv->pdv_host_id);
|
|
if (!sh) {
|
|
pr_err("pSCSI: Unable to locate"
|
|
" pdv_host_id: %d\n", pdv->pdv_host_id);
|
|
return -EINVAL;
|
|
}
|
|
pdv->pdv_lld_host = sh;
|
|
}
|
|
} else {
|
|
if (phv->phv_mode == PHV_VIRTUAL_HOST_ID) {
|
|
pr_err("pSCSI: PHV_VIRTUAL_HOST_ID set while"
|
|
" struct Scsi_Host exists\n");
|
|
return -EEXIST;
|
|
}
|
|
}
|
|
|
|
spin_lock_irq(sh->host_lock);
|
|
list_for_each_entry(sd, &sh->__devices, siblings) {
|
|
if ((pdv->pdv_channel_id != sd->channel) ||
|
|
(pdv->pdv_target_id != sd->id) ||
|
|
(pdv->pdv_lun_id != sd->lun))
|
|
continue;
|
|
/*
|
|
* Functions will release the held struct scsi_host->host_lock
|
|
* before calling calling pscsi_add_device_to_list() to register
|
|
* struct scsi_device with target_core_mod.
|
|
*/
|
|
switch (sd->type) {
|
|
case TYPE_DISK:
|
|
case TYPE_ZBC:
|
|
ret = pscsi_create_type_disk(dev, sd);
|
|
break;
|
|
default:
|
|
ret = pscsi_create_type_nondisk(dev, sd);
|
|
break;
|
|
}
|
|
|
|
if (ret) {
|
|
if (phv->phv_mode == PHV_VIRTUAL_HOST_ID)
|
|
scsi_host_put(sh);
|
|
else if (legacy_mode_enable) {
|
|
pscsi_pmode_enable_hba(hba, 0);
|
|
hba->hba_flags &= ~HBA_FLAGS_PSCSI_MODE;
|
|
}
|
|
pdv->pdv_sd = NULL;
|
|
return ret;
|
|
}
|
|
return 0;
|
|
}
|
|
spin_unlock_irq(sh->host_lock);
|
|
|
|
pr_err("pSCSI: Unable to locate %d:%d:%d:%d\n", sh->host_no,
|
|
pdv->pdv_channel_id, pdv->pdv_target_id, pdv->pdv_lun_id);
|
|
|
|
if (phv->phv_mode == PHV_VIRTUAL_HOST_ID)
|
|
scsi_host_put(sh);
|
|
else if (legacy_mode_enable) {
|
|
pscsi_pmode_enable_hba(hba, 0);
|
|
hba->hba_flags &= ~HBA_FLAGS_PSCSI_MODE;
|
|
}
|
|
|
|
return -ENODEV;
|
|
}
|
|
|
|
static void pscsi_dev_call_rcu(struct rcu_head *p)
|
|
{
|
|
struct se_device *dev = container_of(p, struct se_device, rcu_head);
|
|
struct pscsi_dev_virt *pdv = PSCSI_DEV(dev);
|
|
|
|
kfree(pdv);
|
|
}
|
|
|
|
static void pscsi_free_device(struct se_device *dev)
|
|
{
|
|
call_rcu(&dev->rcu_head, pscsi_dev_call_rcu);
|
|
}
|
|
|
|
static void pscsi_destroy_device(struct se_device *dev)
|
|
{
|
|
struct pscsi_dev_virt *pdv = PSCSI_DEV(dev);
|
|
struct pscsi_hba_virt *phv = dev->se_hba->hba_ptr;
|
|
struct scsi_device *sd = pdv->pdv_sd;
|
|
|
|
if (sd) {
|
|
/*
|
|
* Release exclusive pSCSI internal struct block_device claim for
|
|
* struct scsi_device with TYPE_DISK or TYPE_ZBC
|
|
* from pscsi_create_type_disk()
|
|
*/
|
|
if ((sd->type == TYPE_DISK || sd->type == TYPE_ZBC) &&
|
|
pdv->pdv_bd) {
|
|
blkdev_put(pdv->pdv_bd,
|
|
FMODE_WRITE|FMODE_READ|FMODE_EXCL);
|
|
pdv->pdv_bd = NULL;
|
|
}
|
|
/*
|
|
* For HBA mode PHV_LLD_SCSI_HOST_NO, release the reference
|
|
* to struct Scsi_Host now.
|
|
*/
|
|
if ((phv->phv_mode == PHV_LLD_SCSI_HOST_NO) &&
|
|
(phv->phv_lld_host != NULL))
|
|
scsi_host_put(phv->phv_lld_host);
|
|
else if (pdv->pdv_lld_host)
|
|
scsi_host_put(pdv->pdv_lld_host);
|
|
|
|
scsi_device_put(sd);
|
|
|
|
pdv->pdv_sd = NULL;
|
|
}
|
|
}
|
|
|
|
static void pscsi_complete_cmd(struct se_cmd *cmd, u8 scsi_status,
|
|
unsigned char *req_sense)
|
|
{
|
|
struct pscsi_dev_virt *pdv = PSCSI_DEV(cmd->se_dev);
|
|
struct scsi_device *sd = pdv->pdv_sd;
|
|
struct pscsi_plugin_task *pt = cmd->priv;
|
|
unsigned char *cdb;
|
|
/*
|
|
* Special case for REPORT_LUNs handling where pscsi_plugin_task has
|
|
* not been allocated because TCM is handling the emulation directly.
|
|
*/
|
|
if (!pt)
|
|
return;
|
|
|
|
cdb = &pt->pscsi_cdb[0];
|
|
/*
|
|
* Hack to make sure that Write-Protect modepage is set if R/O mode is
|
|
* forced.
|
|
*/
|
|
if (!cmd->data_length)
|
|
goto after_mode_sense;
|
|
|
|
if (((cdb[0] == MODE_SENSE) || (cdb[0] == MODE_SENSE_10)) &&
|
|
scsi_status == SAM_STAT_GOOD) {
|
|
bool read_only = target_lun_is_rdonly(cmd);
|
|
|
|
if (read_only) {
|
|
unsigned char *buf;
|
|
|
|
buf = transport_kmap_data_sg(cmd);
|
|
if (!buf)
|
|
; /* XXX: TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE */
|
|
|
|
if (cdb[0] == MODE_SENSE_10) {
|
|
if (!(buf[3] & 0x80))
|
|
buf[3] |= 0x80;
|
|
} else {
|
|
if (!(buf[2] & 0x80))
|
|
buf[2] |= 0x80;
|
|
}
|
|
|
|
transport_kunmap_data_sg(cmd);
|
|
}
|
|
}
|
|
after_mode_sense:
|
|
|
|
if (sd->type != TYPE_TAPE || !cmd->data_length)
|
|
goto after_mode_select;
|
|
|
|
/*
|
|
* Hack to correctly obtain the initiator requested blocksize for
|
|
* TYPE_TAPE. Since this value is dependent upon each tape media,
|
|
* struct scsi_device->sector_size will not contain the correct value
|
|
* by default, so we go ahead and set it so
|
|
* TRANSPORT(dev)->get_blockdev() returns the correct value to the
|
|
* storage engine.
|
|
*/
|
|
if (((cdb[0] == MODE_SELECT) || (cdb[0] == MODE_SELECT_10)) &&
|
|
scsi_status == SAM_STAT_GOOD) {
|
|
unsigned char *buf;
|
|
u16 bdl;
|
|
u32 blocksize;
|
|
|
|
buf = sg_virt(&cmd->t_data_sg[0]);
|
|
if (!buf) {
|
|
pr_err("Unable to get buf for scatterlist\n");
|
|
goto after_mode_select;
|
|
}
|
|
|
|
if (cdb[0] == MODE_SELECT)
|
|
bdl = buf[3];
|
|
else
|
|
bdl = get_unaligned_be16(&buf[6]);
|
|
|
|
if (!bdl)
|
|
goto after_mode_select;
|
|
|
|
if (cdb[0] == MODE_SELECT)
|
|
blocksize = get_unaligned_be24(&buf[9]);
|
|
else
|
|
blocksize = get_unaligned_be24(&buf[13]);
|
|
|
|
sd->sector_size = blocksize;
|
|
}
|
|
after_mode_select:
|
|
|
|
if (scsi_status == SAM_STAT_CHECK_CONDITION)
|
|
transport_copy_sense_to_cmd(cmd, req_sense);
|
|
}
|
|
|
|
enum {
|
|
Opt_scsi_host_id, Opt_scsi_channel_id, Opt_scsi_target_id,
|
|
Opt_scsi_lun_id, Opt_err
|
|
};
|
|
|
|
static match_table_t tokens = {
|
|
{Opt_scsi_host_id, "scsi_host_id=%d"},
|
|
{Opt_scsi_channel_id, "scsi_channel_id=%d"},
|
|
{Opt_scsi_target_id, "scsi_target_id=%d"},
|
|
{Opt_scsi_lun_id, "scsi_lun_id=%d"},
|
|
{Opt_err, NULL}
|
|
};
|
|
|
|
static ssize_t pscsi_set_configfs_dev_params(struct se_device *dev,
|
|
const char *page, ssize_t count)
|
|
{
|
|
struct pscsi_dev_virt *pdv = PSCSI_DEV(dev);
|
|
struct pscsi_hba_virt *phv = dev->se_hba->hba_ptr;
|
|
char *orig, *ptr, *opts;
|
|
substring_t args[MAX_OPT_ARGS];
|
|
int ret = 0, arg, token;
|
|
|
|
opts = kstrdup(page, GFP_KERNEL);
|
|
if (!opts)
|
|
return -ENOMEM;
|
|
|
|
orig = opts;
|
|
|
|
while ((ptr = strsep(&opts, ",\n")) != NULL) {
|
|
if (!*ptr)
|
|
continue;
|
|
|
|
token = match_token(ptr, tokens, args);
|
|
switch (token) {
|
|
case Opt_scsi_host_id:
|
|
if (phv->phv_mode == PHV_LLD_SCSI_HOST_NO) {
|
|
pr_err("PSCSI[%d]: Unable to accept"
|
|
" scsi_host_id while phv_mode =="
|
|
" PHV_LLD_SCSI_HOST_NO\n",
|
|
phv->phv_host_id);
|
|
ret = -EINVAL;
|
|
goto out;
|
|
}
|
|
ret = match_int(args, &arg);
|
|
if (ret)
|
|
goto out;
|
|
pdv->pdv_host_id = arg;
|
|
pr_debug("PSCSI[%d]: Referencing SCSI Host ID:"
|
|
" %d\n", phv->phv_host_id, pdv->pdv_host_id);
|
|
pdv->pdv_flags |= PDF_HAS_VIRT_HOST_ID;
|
|
break;
|
|
case Opt_scsi_channel_id:
|
|
ret = match_int(args, &arg);
|
|
if (ret)
|
|
goto out;
|
|
pdv->pdv_channel_id = arg;
|
|
pr_debug("PSCSI[%d]: Referencing SCSI Channel"
|
|
" ID: %d\n", phv->phv_host_id,
|
|
pdv->pdv_channel_id);
|
|
pdv->pdv_flags |= PDF_HAS_CHANNEL_ID;
|
|
break;
|
|
case Opt_scsi_target_id:
|
|
ret = match_int(args, &arg);
|
|
if (ret)
|
|
goto out;
|
|
pdv->pdv_target_id = arg;
|
|
pr_debug("PSCSI[%d]: Referencing SCSI Target"
|
|
" ID: %d\n", phv->phv_host_id,
|
|
pdv->pdv_target_id);
|
|
pdv->pdv_flags |= PDF_HAS_TARGET_ID;
|
|
break;
|
|
case Opt_scsi_lun_id:
|
|
ret = match_int(args, &arg);
|
|
if (ret)
|
|
goto out;
|
|
pdv->pdv_lun_id = arg;
|
|
pr_debug("PSCSI[%d]: Referencing SCSI LUN ID:"
|
|
" %d\n", phv->phv_host_id, pdv->pdv_lun_id);
|
|
pdv->pdv_flags |= PDF_HAS_LUN_ID;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
out:
|
|
kfree(orig);
|
|
return (!ret) ? count : ret;
|
|
}
|
|
|
|
static ssize_t pscsi_show_configfs_dev_params(struct se_device *dev, char *b)
|
|
{
|
|
struct pscsi_hba_virt *phv = dev->se_hba->hba_ptr;
|
|
struct pscsi_dev_virt *pdv = PSCSI_DEV(dev);
|
|
struct scsi_device *sd = pdv->pdv_sd;
|
|
unsigned char host_id[16];
|
|
ssize_t bl;
|
|
int i;
|
|
|
|
if (phv->phv_mode == PHV_VIRTUAL_HOST_ID)
|
|
snprintf(host_id, 16, "%d", pdv->pdv_host_id);
|
|
else
|
|
snprintf(host_id, 16, "PHBA Mode");
|
|
|
|
bl = sprintf(b, "SCSI Device Bus Location:"
|
|
" Channel ID: %d Target ID: %d LUN: %d Host ID: %s\n",
|
|
pdv->pdv_channel_id, pdv->pdv_target_id, pdv->pdv_lun_id,
|
|
host_id);
|
|
|
|
if (sd) {
|
|
bl += sprintf(b + bl, " ");
|
|
bl += sprintf(b + bl, "Vendor: ");
|
|
for (i = 0; i < 8; i++) {
|
|
if (ISPRINT(sd->vendor[i])) /* printable character? */
|
|
bl += sprintf(b + bl, "%c", sd->vendor[i]);
|
|
else
|
|
bl += sprintf(b + bl, " ");
|
|
}
|
|
bl += sprintf(b + bl, " Model: ");
|
|
for (i = 0; i < 16; i++) {
|
|
if (ISPRINT(sd->model[i])) /* printable character ? */
|
|
bl += sprintf(b + bl, "%c", sd->model[i]);
|
|
else
|
|
bl += sprintf(b + bl, " ");
|
|
}
|
|
bl += sprintf(b + bl, " Rev: ");
|
|
for (i = 0; i < 4; i++) {
|
|
if (ISPRINT(sd->rev[i])) /* printable character ? */
|
|
bl += sprintf(b + bl, "%c", sd->rev[i]);
|
|
else
|
|
bl += sprintf(b + bl, " ");
|
|
}
|
|
bl += sprintf(b + bl, "\n");
|
|
}
|
|
return bl;
|
|
}
|
|
|
|
static void pscsi_bi_endio(struct bio *bio)
|
|
{
|
|
bio_put(bio);
|
|
}
|
|
|
|
static inline struct bio *pscsi_get_bio(int nr_vecs)
|
|
{
|
|
struct bio *bio;
|
|
/*
|
|
* Use bio_malloc() following the comment in for bio -> struct request
|
|
* in block/blk-core.c:blk_make_request()
|
|
*/
|
|
bio = bio_kmalloc(GFP_KERNEL, nr_vecs);
|
|
if (!bio) {
|
|
pr_err("PSCSI: bio_kmalloc() failed\n");
|
|
return NULL;
|
|
}
|
|
bio->bi_end_io = pscsi_bi_endio;
|
|
|
|
return bio;
|
|
}
|
|
|
|
static sense_reason_t
|
|
pscsi_map_sg(struct se_cmd *cmd, struct scatterlist *sgl, u32 sgl_nents,
|
|
struct request *req)
|
|
{
|
|
struct pscsi_dev_virt *pdv = PSCSI_DEV(cmd->se_dev);
|
|
struct bio *bio = NULL;
|
|
struct page *page;
|
|
struct scatterlist *sg;
|
|
u32 data_len = cmd->data_length, i, len, bytes, off;
|
|
int nr_pages = (cmd->data_length + sgl[0].offset +
|
|
PAGE_SIZE - 1) >> PAGE_SHIFT;
|
|
int nr_vecs = 0, rc;
|
|
int rw = (cmd->data_direction == DMA_TO_DEVICE);
|
|
|
|
BUG_ON(!cmd->data_length);
|
|
|
|
pr_debug("PSCSI: nr_pages: %d\n", nr_pages);
|
|
|
|
for_each_sg(sgl, sg, sgl_nents, i) {
|
|
page = sg_page(sg);
|
|
off = sg->offset;
|
|
len = sg->length;
|
|
|
|
pr_debug("PSCSI: i: %d page: %p len: %d off: %d\n", i,
|
|
page, len, off);
|
|
|
|
/*
|
|
* We only have one page of data in each sg element,
|
|
* we can not cross a page boundary.
|
|
*/
|
|
if (off + len > PAGE_SIZE)
|
|
goto fail;
|
|
|
|
if (len > 0 && data_len > 0) {
|
|
bytes = min_t(unsigned int, len, PAGE_SIZE - off);
|
|
bytes = min(bytes, data_len);
|
|
|
|
if (!bio) {
|
|
nr_vecs = min_t(int, BIO_MAX_PAGES, nr_pages);
|
|
nr_pages -= nr_vecs;
|
|
/*
|
|
* Calls bio_kmalloc() and sets bio->bi_end_io()
|
|
*/
|
|
bio = pscsi_get_bio(nr_vecs);
|
|
if (!bio)
|
|
goto fail;
|
|
|
|
if (rw)
|
|
bio_set_op_attrs(bio, REQ_OP_WRITE, 0);
|
|
|
|
pr_debug("PSCSI: Allocated bio: %p,"
|
|
" dir: %s nr_vecs: %d\n", bio,
|
|
(rw) ? "rw" : "r", nr_vecs);
|
|
}
|
|
|
|
pr_debug("PSCSI: Calling bio_add_pc_page() i: %d"
|
|
" bio: %p page: %p len: %d off: %d\n", i, bio,
|
|
page, len, off);
|
|
|
|
rc = bio_add_pc_page(pdv->pdv_sd->request_queue,
|
|
bio, page, bytes, off);
|
|
pr_debug("PSCSI: bio->bi_vcnt: %d nr_vecs: %d\n",
|
|
bio_segments(bio), nr_vecs);
|
|
if (rc != bytes) {
|
|
pr_debug("PSCSI: Reached bio->bi_vcnt max:"
|
|
" %d i: %d bio: %p, allocating another"
|
|
" bio\n", bio->bi_vcnt, i, bio);
|
|
|
|
rc = blk_rq_append_bio(req, bio);
|
|
if (rc) {
|
|
pr_err("pSCSI: failed to append bio\n");
|
|
goto fail;
|
|
}
|
|
|
|
/*
|
|
* Clear the pointer so that another bio will
|
|
* be allocated with pscsi_get_bio() above.
|
|
*/
|
|
bio = NULL;
|
|
}
|
|
|
|
data_len -= bytes;
|
|
}
|
|
}
|
|
|
|
if (bio) {
|
|
rc = blk_rq_append_bio(req, bio);
|
|
if (rc) {
|
|
pr_err("pSCSI: failed to append bio\n");
|
|
goto fail;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
fail:
|
|
return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
|
|
}
|
|
|
|
static sense_reason_t
|
|
pscsi_parse_cdb(struct se_cmd *cmd)
|
|
{
|
|
if (cmd->se_cmd_flags & SCF_BIDI)
|
|
return TCM_UNSUPPORTED_SCSI_OPCODE;
|
|
|
|
return passthrough_parse_cdb(cmd, pscsi_execute_cmd);
|
|
}
|
|
|
|
static sense_reason_t
|
|
pscsi_execute_cmd(struct se_cmd *cmd)
|
|
{
|
|
struct scatterlist *sgl = cmd->t_data_sg;
|
|
u32 sgl_nents = cmd->t_data_nents;
|
|
struct pscsi_dev_virt *pdv = PSCSI_DEV(cmd->se_dev);
|
|
struct pscsi_plugin_task *pt;
|
|
struct request *req;
|
|
sense_reason_t ret;
|
|
|
|
/*
|
|
* Dynamically alloc cdb space, since it may be larger than
|
|
* TCM_MAX_COMMAND_SIZE
|
|
*/
|
|
pt = kzalloc(sizeof(*pt) + scsi_command_size(cmd->t_task_cdb), GFP_KERNEL);
|
|
if (!pt) {
|
|
return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
|
|
}
|
|
cmd->priv = pt;
|
|
|
|
memcpy(pt->pscsi_cdb, cmd->t_task_cdb,
|
|
scsi_command_size(cmd->t_task_cdb));
|
|
|
|
req = blk_get_request(pdv->pdv_sd->request_queue,
|
|
cmd->data_direction == DMA_TO_DEVICE ?
|
|
REQ_OP_SCSI_OUT : REQ_OP_SCSI_IN,
|
|
GFP_KERNEL);
|
|
if (IS_ERR(req)) {
|
|
pr_err("PSCSI: blk_get_request() failed\n");
|
|
ret = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
|
|
goto fail;
|
|
}
|
|
|
|
if (sgl) {
|
|
ret = pscsi_map_sg(cmd, sgl, sgl_nents, req);
|
|
if (ret)
|
|
goto fail_put_request;
|
|
}
|
|
|
|
req->end_io = pscsi_req_done;
|
|
req->end_io_data = cmd;
|
|
scsi_req(req)->cmd_len = scsi_command_size(pt->pscsi_cdb);
|
|
scsi_req(req)->cmd = &pt->pscsi_cdb[0];
|
|
if (pdv->pdv_sd->type == TYPE_DISK ||
|
|
pdv->pdv_sd->type == TYPE_ZBC)
|
|
req->timeout = PS_TIMEOUT_DISK;
|
|
else
|
|
req->timeout = PS_TIMEOUT_OTHER;
|
|
scsi_req(req)->retries = PS_RETRY;
|
|
|
|
blk_execute_rq_nowait(pdv->pdv_sd->request_queue, NULL, req,
|
|
(cmd->sam_task_attr == TCM_HEAD_TAG),
|
|
pscsi_req_done);
|
|
|
|
return 0;
|
|
|
|
fail_put_request:
|
|
blk_put_request(req);
|
|
fail:
|
|
kfree(pt);
|
|
return ret;
|
|
}
|
|
|
|
/* pscsi_get_device_type():
|
|
*
|
|
*
|
|
*/
|
|
static u32 pscsi_get_device_type(struct se_device *dev)
|
|
{
|
|
struct pscsi_dev_virt *pdv = PSCSI_DEV(dev);
|
|
struct scsi_device *sd = pdv->pdv_sd;
|
|
|
|
return (sd) ? sd->type : TYPE_NO_LUN;
|
|
}
|
|
|
|
static sector_t pscsi_get_blocks(struct se_device *dev)
|
|
{
|
|
struct pscsi_dev_virt *pdv = PSCSI_DEV(dev);
|
|
|
|
if (pdv->pdv_bd && pdv->pdv_bd->bd_part)
|
|
return pdv->pdv_bd->bd_part->nr_sects;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void pscsi_req_done(struct request *req, blk_status_t status)
|
|
{
|
|
struct se_cmd *cmd = req->end_io_data;
|
|
struct pscsi_plugin_task *pt = cmd->priv;
|
|
int result = scsi_req(req)->result;
|
|
u8 scsi_status = status_byte(result) << 1;
|
|
|
|
if (scsi_status) {
|
|
pr_debug("PSCSI Status Byte exception at cmd: %p CDB:"
|
|
" 0x%02x Result: 0x%08x\n", cmd, pt->pscsi_cdb[0],
|
|
result);
|
|
}
|
|
|
|
pscsi_complete_cmd(cmd, scsi_status, scsi_req(req)->sense);
|
|
|
|
switch (host_byte(result)) {
|
|
case DID_OK:
|
|
target_complete_cmd(cmd, scsi_status);
|
|
break;
|
|
default:
|
|
pr_debug("PSCSI Host Byte exception at cmd: %p CDB:"
|
|
" 0x%02x Result: 0x%08x\n", cmd, pt->pscsi_cdb[0],
|
|
result);
|
|
target_complete_cmd(cmd, SAM_STAT_CHECK_CONDITION);
|
|
break;
|
|
}
|
|
|
|
__blk_put_request(req->q, req);
|
|
kfree(pt);
|
|
}
|
|
|
|
static const struct target_backend_ops pscsi_ops = {
|
|
.name = "pscsi",
|
|
.owner = THIS_MODULE,
|
|
.transport_flags = TRANSPORT_FLAG_PASSTHROUGH |
|
|
TRANSPORT_FLAG_PASSTHROUGH_ALUA |
|
|
TRANSPORT_FLAG_PASSTHROUGH_PGR,
|
|
.attach_hba = pscsi_attach_hba,
|
|
.detach_hba = pscsi_detach_hba,
|
|
.pmode_enable_hba = pscsi_pmode_enable_hba,
|
|
.alloc_device = pscsi_alloc_device,
|
|
.configure_device = pscsi_configure_device,
|
|
.destroy_device = pscsi_destroy_device,
|
|
.free_device = pscsi_free_device,
|
|
.parse_cdb = pscsi_parse_cdb,
|
|
.set_configfs_dev_params = pscsi_set_configfs_dev_params,
|
|
.show_configfs_dev_params = pscsi_show_configfs_dev_params,
|
|
.get_device_type = pscsi_get_device_type,
|
|
.get_blocks = pscsi_get_blocks,
|
|
.tb_dev_attrib_attrs = passthrough_attrib_attrs,
|
|
};
|
|
|
|
static int __init pscsi_module_init(void)
|
|
{
|
|
return transport_backend_register(&pscsi_ops);
|
|
}
|
|
|
|
static void __exit pscsi_module_exit(void)
|
|
{
|
|
target_backend_unregister(&pscsi_ops);
|
|
}
|
|
|
|
MODULE_DESCRIPTION("TCM PSCSI subsystem plugin");
|
|
MODULE_AUTHOR("nab@Linux-iSCSI.org");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_init(pscsi_module_init);
|
|
module_exit(pscsi_module_exit);
|