mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-16 16:54:20 +08:00
725aa4a9ab
unsigned short != u8, it's u16... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
311 lines
8.8 KiB
C
311 lines
8.8 KiB
C
/*
|
|
* Intel i82586 Ethernet definitions
|
|
*
|
|
* This is an extension to the Linux operating system, and is covered by the
|
|
* same GNU General Public License that covers that work.
|
|
*
|
|
* copyrights (c) 1994 by Michael Hipp (hippm@informatik.uni-tuebingen.de)
|
|
*
|
|
* I have done a look in the following sources:
|
|
* crynwr-packet-driver by Russ Nelson
|
|
* Garret A. Wollman's i82586-driver for BSD
|
|
*/
|
|
|
|
|
|
#define NI52_RESET 0 /* writing to this address, resets the i82586 */
|
|
#define NI52_ATTENTION 1 /* channel attention, kick the 586 */
|
|
#define NI52_TENA 3 /* 2-5 possibly wrong, Xmit enable */
|
|
#define NI52_TDIS 2 /* Xmit disable */
|
|
#define NI52_INTENA 5 /* Interrupt enable */
|
|
#define NI52_INTDIS 4 /* Interrupt disable */
|
|
#define NI52_MAGIC1 6 /* dunno exact function */
|
|
#define NI52_MAGIC2 7 /* dunno exact function */
|
|
|
|
#define NI52_MAGICVAL1 0x00 /* magic-values for ni5210 card */
|
|
#define NI52_MAGICVAL2 0x55
|
|
|
|
/*
|
|
* where to find the System Configuration Pointer (SCP)
|
|
*/
|
|
#define SCP_DEFAULT_ADDRESS 0xfffff4
|
|
|
|
|
|
/*
|
|
* System Configuration Pointer Struct
|
|
*/
|
|
|
|
struct scp_struct
|
|
{
|
|
u16 zero_dum0; /* has to be zero */
|
|
u8 sysbus; /* 0=16Bit,1=8Bit */
|
|
u8 zero_dum1; /* has to be zero for 586 */
|
|
u16 zero_dum2;
|
|
u16 zero_dum3;
|
|
u32 iscp; /* pointer to the iscp-block */
|
|
};
|
|
|
|
|
|
/*
|
|
* Intermediate System Configuration Pointer (ISCP)
|
|
*/
|
|
struct iscp_struct
|
|
{
|
|
u8 busy; /* 586 clears after successful init */
|
|
u8 zero_dummy; /* has to be zero */
|
|
u16 scb_offset; /* pointeroffset to the scb_base */
|
|
u32 scb_base; /* base-address of all 16-bit offsets */
|
|
};
|
|
|
|
/*
|
|
* System Control Block (SCB)
|
|
*/
|
|
struct scb_struct
|
|
{
|
|
u8 rus;
|
|
u8 cus;
|
|
u8 cmd_ruc; /* command word: RU part */
|
|
u8 cmd_cuc; /* command word: CU part & ACK */
|
|
u16 cbl_offset; /* pointeroffset, command block list */
|
|
u16 rfa_offset; /* pointeroffset, receive frame area */
|
|
u16 crc_errs; /* CRC-Error counter */
|
|
u16 aln_errs; /* alignmenterror counter */
|
|
u16 rsc_errs; /* Resourceerror counter */
|
|
u16 ovrn_errs; /* OVerrunerror counter */
|
|
};
|
|
|
|
/*
|
|
* possible command values for the command word
|
|
*/
|
|
#define RUC_MASK 0x0070 /* mask for RU commands */
|
|
#define RUC_NOP 0x0000 /* NOP-command */
|
|
#define RUC_START 0x0010 /* start RU */
|
|
#define RUC_RESUME 0x0020 /* resume RU after suspend */
|
|
#define RUC_SUSPEND 0x0030 /* suspend RU */
|
|
#define RUC_ABORT 0x0040 /* abort receiver operation immediately */
|
|
|
|
#define CUC_MASK 0x07 /* mask for CU command */
|
|
#define CUC_NOP 0x00 /* NOP-command */
|
|
#define CUC_START 0x01 /* start execution of 1. cmd on the CBL */
|
|
#define CUC_RESUME 0x02 /* resume after suspend */
|
|
#define CUC_SUSPEND 0x03 /* Suspend CU */
|
|
#define CUC_ABORT 0x04 /* abort command operation immediately */
|
|
|
|
#define ACK_MASK 0xf0 /* mask for ACK command */
|
|
#define ACK_CX 0x80 /* acknowledges STAT_CX */
|
|
#define ACK_FR 0x40 /* ack. STAT_FR */
|
|
#define ACK_CNA 0x20 /* ack. STAT_CNA */
|
|
#define ACK_RNR 0x10 /* ack. STAT_RNR */
|
|
|
|
/*
|
|
* possible status values for the status word
|
|
*/
|
|
#define STAT_MASK 0xf0 /* mask for cause of interrupt */
|
|
#define STAT_CX 0x80 /* CU finished cmd with its I bit set */
|
|
#define STAT_FR 0x40 /* RU finished receiving a frame */
|
|
#define STAT_CNA 0x20 /* CU left active state */
|
|
#define STAT_RNR 0x10 /* RU left ready state */
|
|
|
|
#define CU_STATUS 0x7 /* CU status, 0=idle */
|
|
#define CU_SUSPEND 0x1 /* CU is suspended */
|
|
#define CU_ACTIVE 0x2 /* CU is active */
|
|
|
|
#define RU_STATUS 0x70 /* RU status, 0=idle */
|
|
#define RU_SUSPEND 0x10 /* RU suspended */
|
|
#define RU_NOSPACE 0x20 /* RU no resources */
|
|
#define RU_READY 0x40 /* RU is ready */
|
|
|
|
/*
|
|
* Receive Frame Descriptor (RFD)
|
|
*/
|
|
struct rfd_struct
|
|
{
|
|
u8 stat_low; /* status word */
|
|
u8 stat_high; /* status word */
|
|
u8 rfd_sf; /* 82596 mode only */
|
|
u8 last; /* Bit15,Last Frame on List / Bit14,suspend */
|
|
u16 next; /* linkoffset to next RFD */
|
|
u16 rbd_offset; /* pointeroffset to RBD-buffer */
|
|
u8 dest[6]; /* ethernet-address, destination */
|
|
u8 source[6]; /* ethernet-address, source */
|
|
u16 length; /* 802.3 frame-length */
|
|
u16 zero_dummy; /* dummy */
|
|
};
|
|
|
|
#define RFD_LAST 0x80 /* last: last rfd in the list */
|
|
#define RFD_SUSP 0x40 /* last: suspend RU after */
|
|
#define RFD_COMPL 0x80
|
|
#define RFD_OK 0x20
|
|
#define RFD_BUSY 0x40
|
|
#define RFD_ERR_LEN 0x10 /* Length error (if enabled length-checking */
|
|
#define RFD_ERR_CRC 0x08 /* CRC error */
|
|
#define RFD_ERR_ALGN 0x04 /* Alignment error */
|
|
#define RFD_ERR_RNR 0x02 /* status: receiver out of resources */
|
|
#define RFD_ERR_OVR 0x01 /* DMA Overrun! */
|
|
|
|
#define RFD_ERR_FTS 0x0080 /* Frame to short */
|
|
#define RFD_ERR_NEOP 0x0040 /* No EOP flag (for bitstuffing only) */
|
|
#define RFD_ERR_TRUN 0x0020 /* (82596 only/SF mode) indicates truncated frame */
|
|
#define RFD_MATCHADD 0x0002 /* status: Destinationaddress !matches IA (only 82596) */
|
|
#define RFD_COLLDET 0x0001 /* Detected collision during reception */
|
|
|
|
/*
|
|
* Receive Buffer Descriptor (RBD)
|
|
*/
|
|
struct rbd_struct
|
|
{
|
|
u16 status; /* status word,number of used bytes in buff */
|
|
u16 next; /* pointeroffset to next RBD */
|
|
u32 buffer; /* receive buffer address pointer */
|
|
u16 size; /* size of this buffer */
|
|
u16 zero_dummy; /* dummy */
|
|
};
|
|
|
|
#define RBD_LAST 0x8000 /* last buffer */
|
|
#define RBD_USED 0x4000 /* this buffer has data */
|
|
#define RBD_MASK 0x3fff /* size-mask for length */
|
|
|
|
/*
|
|
* Statusvalues for Commands/RFD
|
|
*/
|
|
#define STAT_COMPL 0x8000 /* status: frame/command is complete */
|
|
#define STAT_BUSY 0x4000 /* status: frame/command is busy */
|
|
#define STAT_OK 0x2000 /* status: frame/command is ok */
|
|
|
|
/*
|
|
* Action-Commands
|
|
*/
|
|
#define CMD_NOP 0x0000 /* NOP */
|
|
#define CMD_IASETUP 0x0001 /* initial address setup command */
|
|
#define CMD_CONFIGURE 0x0002 /* configure command */
|
|
#define CMD_MCSETUP 0x0003 /* MC setup command */
|
|
#define CMD_XMIT 0x0004 /* transmit command */
|
|
#define CMD_TDR 0x0005 /* time domain reflectometer (TDR) command */
|
|
#define CMD_DUMP 0x0006 /* dump command */
|
|
#define CMD_DIAGNOSE 0x0007 /* diagnose command */
|
|
|
|
/*
|
|
* Action command bits
|
|
*/
|
|
#define CMD_LAST 0x8000 /* indicates last command in the CBL */
|
|
#define CMD_SUSPEND 0x4000 /* suspend CU after this CB */
|
|
#define CMD_INT 0x2000 /* generate interrupt after execution */
|
|
|
|
/*
|
|
* NOP - command
|
|
*/
|
|
struct nop_cmd_struct
|
|
{
|
|
u16 cmd_status; /* status of this command */
|
|
u16 cmd_cmd; /* the command itself (+bits) */
|
|
u16 cmd_link; /* offsetpointer to next command */
|
|
};
|
|
|
|
/*
|
|
* IA Setup command
|
|
*/
|
|
struct iasetup_cmd_struct
|
|
{
|
|
u16 cmd_status;
|
|
u16 cmd_cmd;
|
|
u16 cmd_link;
|
|
u8 iaddr[6];
|
|
};
|
|
|
|
/*
|
|
* Configure command
|
|
*/
|
|
struct configure_cmd_struct
|
|
{
|
|
u16 cmd_status;
|
|
u16 cmd_cmd;
|
|
u16 cmd_link;
|
|
u8 byte_cnt; /* size of the config-cmd */
|
|
u8 fifo; /* fifo/recv monitor */
|
|
u8 sav_bf; /* save bad frames (bit7=1)*/
|
|
u8 adr_len; /* adr_len(0-2),al_loc(3),pream(4-5),loopbak(6-7)*/
|
|
u8 priority; /* lin_prio(0-2),exp_prio(4-6),bof_metd(7) */
|
|
u8 ifs; /* inter frame spacing */
|
|
u8 time_low; /* slot time low */
|
|
u8 time_high; /* slot time high(0-2) and max. retries(4-7) */
|
|
u8 promisc; /* promisc-mode(0) , et al (1-7) */
|
|
u8 carr_coll; /* carrier(0-3)/collision(4-7) stuff */
|
|
u8 fram_len; /* minimal frame len */
|
|
u8 dummy; /* dummy */
|
|
};
|
|
|
|
/*
|
|
* Multicast Setup command
|
|
*/
|
|
struct mcsetup_cmd_struct
|
|
{
|
|
u16 cmd_status;
|
|
u16 cmd_cmd;
|
|
u16 cmd_link;
|
|
u16 mc_cnt; /* number of bytes in the MC-List */
|
|
u8 mc_list[0][6]; /* pointer to 6 bytes entries */
|
|
};
|
|
|
|
/*
|
|
* DUMP command
|
|
*/
|
|
struct dump_cmd_struct
|
|
{
|
|
u16 cmd_status;
|
|
u16 cmd_cmd;
|
|
u16 cmd_link;
|
|
u16 dump_offset; /* pointeroffset to DUMP space */
|
|
};
|
|
|
|
/*
|
|
* transmit command
|
|
*/
|
|
struct transmit_cmd_struct
|
|
{
|
|
u16 cmd_status;
|
|
u16 cmd_cmd;
|
|
u16 cmd_link;
|
|
u16 tbd_offset; /* pointeroffset to TBD */
|
|
u8 dest[6]; /* destination address of the frame */
|
|
u16 length; /* user defined: 802.3 length / Ether type */
|
|
};
|
|
|
|
#define TCMD_ERRMASK 0x0fa0
|
|
#define TCMD_MAXCOLLMASK 0x000f
|
|
#define TCMD_MAXCOLL 0x0020
|
|
#define TCMD_HEARTBEAT 0x0040
|
|
#define TCMD_DEFERRED 0x0080
|
|
#define TCMD_UNDERRUN 0x0100
|
|
#define TCMD_LOSTCTS 0x0200
|
|
#define TCMD_NOCARRIER 0x0400
|
|
#define TCMD_LATECOLL 0x0800
|
|
|
|
struct tdr_cmd_struct
|
|
{
|
|
u16 cmd_status;
|
|
u16 cmd_cmd;
|
|
u16 cmd_link;
|
|
u16 status;
|
|
};
|
|
|
|
#define TDR_LNK_OK 0x8000 /* No link problem identified */
|
|
#define TDR_XCVR_PRB 0x4000 /* indicates a transceiver problem */
|
|
#define TDR_ET_OPN 0x2000 /* open, no correct termination */
|
|
#define TDR_ET_SRT 0x1000 /* TDR detected a short circuit */
|
|
#define TDR_TIMEMASK 0x07ff /* mask for the time field */
|
|
|
|
/*
|
|
* Transmit Buffer Descriptor (TBD)
|
|
*/
|
|
struct tbd_struct
|
|
{
|
|
u16 size; /* size + EOF-Flag(15) */
|
|
u16 next; /* pointeroffset to next TBD */
|
|
u32 buffer; /* pointer to buffer */
|
|
};
|
|
|
|
#define TBD_LAST 0x8000 /* EOF-Flag, indicates last buffer in list */
|
|
|
|
|
|
|
|
|