korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-14 15:54:15 +08:00
Code Issues Packages Projects Releases Wiki Activity
12c03bd444
linux/arch/mips/kernel/traps.c
Gregory CLEMENT 524aa6b17a MIPS: traps: Give more explanations if ebase doesn't belong to KSEG0 
With the expanded support for placing the kernel in XPHYS rather than
just KSEG0, scenarios where ebase doesn't belong to KSEG0 are more
likely to occur. In such cases, we currently experience a substantial
and perplexing stack dump without any accompanying explanation. To
rectify this, we aim to replace the uninformative stack dump with a
warning that offers a clear explanation of the issue.

Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2024-02-20 12:44:59 +01:00

2533 lines
62 KiB
C
Raw Blame History

/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1994 - 1999, 2000, 01, 06 Ralf Baechle
* Copyright (C) 1995, 1996 Paul M. Antoine
* Copyright (C) 1998 Ulf Carlsson
* Copyright (C) 1999 Silicon Graphics, Inc.
* Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
* Copyright (C) 2002, 2003, 2004, 2005, 2007 Maciej W. Rozycki
* Copyright (C) 2000, 2001, 2012 MIPS Technologies, Inc. All rights reserved.
* Copyright (C) 2014, Imagination Technologies Ltd.
*/
#include <linux/bitops.h>
#include <linux/bug.h>
#include <linux/compiler.h>
#include <linux/context_tracking.h>
#include <linux/cpu_pm.h>
#include <linux/kexec.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/extable.h>
#include <linux/mm.h>
#include <linux/sched/mm.h>
#include <linux/sched/debug.h>
#include <linux/smp.h>
#include <linux/spinlock.h>
#include <linux/kallsyms.h>
#include <linux/memblock.h>
#include <linux/interrupt.h>
#include <linux/ptrace.h>
#include <linux/kgdb.h>
#include <linux/kdebug.h>
#include <linux/kprobes.h>
#include <linux/notifier.h>
#include <linux/kdb.h>
#include <linux/irq.h>
#include <linux/perf_event.h>
#include <asm/addrspace.h>
#include <asm/bootinfo.h>
#include <asm/branch.h>
#include <asm/break.h>
#include <asm/cop2.h>
#include <asm/cpu.h>
#include <asm/cpu-type.h>
#include <asm/dsp.h>
#include <asm/fpu.h>
#include <asm/fpu_emulator.h>
#include <asm/idle.h>
#include <asm/isa-rev.h>
#include <asm/mips-cps.h>
#include <asm/mips-r2-to-r6-emul.h>
#include <asm/mipsregs.h>
#include <asm/mipsmtregs.h>
#include <asm/module.h>
#include <asm/msa.h>
#include <asm/ptrace.h>
#include <asm/regdef.h>
#include <asm/sections.h>
#include <asm/siginfo.h>
#include <asm/tlbdebug.h>
#include <asm/traps.h>
#include <linux/uaccess.h>
#include <asm/watch.h>
#include <asm/mmu_context.h>
#include <asm/types.h>
#include <asm/stacktrace.h>
#include <asm/tlbex.h>
#include <asm/uasm.h>
#include <asm/mach-loongson64/cpucfg-emul.h>
#include "access-helper.h"
extern void check_wait(void);
extern asmlinkage void rollback_handle_int(void);
extern asmlinkage void handle_int(void);
extern asmlinkage void handle_adel(void);
extern asmlinkage void handle_ades(void);
extern asmlinkage void handle_ibe(void);
extern asmlinkage void handle_dbe(void);
extern asmlinkage void handle_sys(void);
extern asmlinkage void handle_bp(void);
extern asmlinkage void handle_ri(void);
extern asmlinkage void handle_ri_rdhwr_tlbp(void);
extern asmlinkage void handle_ri_rdhwr(void);
extern asmlinkage void handle_cpu(void);
extern asmlinkage void handle_ov(void);
extern asmlinkage void handle_tr(void);
extern asmlinkage void handle_msa_fpe(void);
extern asmlinkage void handle_fpe(void);
extern asmlinkage void handle_ftlb(void);
extern asmlinkage void handle_gsexc(void);
extern asmlinkage void handle_msa(void);
extern asmlinkage void handle_mdmx(void);
extern asmlinkage void handle_watch(void);
extern asmlinkage void handle_mt(void);
extern asmlinkage void handle_dsp(void);
extern asmlinkage void handle_mcheck(void);
extern asmlinkage void handle_reserved(void);
extern void tlb_do_page_fault_0(void);
void (*board_be_init)(void);
static int (*board_be_handler)(struct pt_regs *regs, int is_fixup);
void (*board_nmi_handler_setup)(void);
void (*board_ejtag_handler_setup)(void);
void (*board_bind_eic_interrupt)(int irq, int regset);
void (*board_ebase_setup)(void);
void(*board_cache_error_setup)(void);
void mips_set_be_handler(int (*handler)(struct pt_regs *regs, int is_fixup))
{
board_be_handler = handler;
}
EXPORT_SYMBOL_GPL(mips_set_be_handler);
static void show_raw_backtrace(unsigned long reg29, const char *loglvl,
bool user)
{
unsigned long *sp = (unsigned long *)(reg29 & ~3);
unsigned long addr;
printk("%sCall Trace:", loglvl);
#ifdef CONFIG_KALLSYMS
printk("%s\n", loglvl);
#endif
while (!kstack_end(sp)) {
if (__get_addr(&addr, sp++, user)) {
printk("%s (Bad stack address)", loglvl);
break;
}
if (__kernel_text_address(addr))
print_ip_sym(loglvl, addr);
}
printk("%s\n", loglvl);
}
#ifdef CONFIG_KALLSYMS
int raw_show_trace;
static int __init set_raw_show_trace(char *str)
{
raw_show_trace = 1;
return 1;
}
__setup("raw_show_trace", set_raw_show_trace);
#endif
static void show_backtrace(struct task_struct *task, const struct pt_regs *regs,
const char *loglvl, bool user)
{
unsigned long sp = regs->regs[29];
unsigned long ra = regs->regs[31];
unsigned long pc = regs->cp0_epc;
if (!task)
task = current;
if (raw_show_trace || user_mode(regs) || !__kernel_text_address(pc)) {
show_raw_backtrace(sp, loglvl, user);
return;
}
printk("%sCall Trace:\n", loglvl);
do {
print_ip_sym(loglvl, pc);
pc = unwind_stack(task, &sp, pc, &ra);
} while (pc);
pr_cont("\n");
}
/*
* This routine abuses get_user()/put_user() to reference pointers
* with at least a bit of error checking ...
*/
static void show_stacktrace(struct task_struct *task,
const struct pt_regs *regs, const char *loglvl, bool user)
{
const int field = 2 * sizeof(unsigned long);
unsigned long stackdata;
int i;
unsigned long *sp = (unsigned long *)regs->regs[29];
printk("%sStack :", loglvl);
i = 0;
while ((unsigned long) sp & (PAGE_SIZE - 1)) {
if (i && ((i % (64 / field)) == 0)) {
pr_cont("\n");
printk("%s ", loglvl);
}
if (i > 39) {
pr_cont(" ...");
break;
}
if (__get_addr(&stackdata, sp++, user)) {
pr_cont(" (Bad stack address)");
break;
}
pr_cont(" %0*lx", field, stackdata);
i++;
}
pr_cont("\n");
show_backtrace(task, regs, loglvl, user);
}
void show_stack(struct task_struct *task, unsigned long *sp, const char *loglvl)
{
struct pt_regs regs;
regs.cp0_status = KSU_KERNEL;
if (sp) {
regs.regs[29] = (unsigned long)sp;
regs.regs[31] = 0;
regs.cp0_epc = 0;
} else {
if (task && task != current) {
regs.regs[29] = task->thread.reg29;
regs.regs[31] = 0;
regs.cp0_epc = task->thread.reg31;
} else {
prepare_frametrace(&regs);
}
}
show_stacktrace(task, &regs, loglvl, false);
}
static void show_code(void *pc, bool user)
{
long i;
unsigned short *pc16 = NULL;
printk("Code:");
if ((unsigned long)pc & 1)
pc16 = (u16 *)((unsigned long)pc & ~1);
for(i = -3 ; i < 6 ; i++) {
if (pc16) {
u16 insn16;
if (__get_inst16(&insn16, pc16 + i, user))
goto bad_address;
pr_cont("%c%04x%c", (i?' ':'<'), insn16, (i?' ':'>'));
} else {
u32 insn32;
if (__get_inst32(&insn32, (u32 *)pc + i, user))
goto bad_address;
pr_cont("%c%08x%c", (i?' ':'<'), insn32, (i?' ':'>'));
}
}
pr_cont("\n");
return;
bad_address:
pr_cont(" (Bad address in epc)\n\n");
}
static void __show_regs(const struct pt_regs *regs)
{
const int field = 2 * sizeof(unsigned long);
unsigned int cause = regs->cp0_cause;
unsigned int exccode;
int i;
show_regs_print_info(KERN_DEFAULT);
/*
* Saved main processor registers
*/
for (i = 0; i < 32; ) {
if ((i % 4) == 0)
printk("$%2d :", i);
if (i == 0)
pr_cont(" %0*lx", field, 0UL);
else if (i == 26 || i == 27)
pr_cont(" %*s", field, "");
else
pr_cont(" %0*lx", field, regs->regs[i]);
i++;
if ((i % 4) == 0)
pr_cont("\n");
}
#ifdef CONFIG_CPU_HAS_SMARTMIPS
printk("Acx : %0*lx\n", field, regs->acx);
#endif
if (MIPS_ISA_REV < 6) {
printk("Hi : %0*lx\n", field, regs->hi);
printk("Lo : %0*lx\n", field, regs->lo);
}
/*
* Saved cp0 registers
*/
printk("epc : %0*lx %pS\n", field, regs->cp0_epc,
(void *) regs->cp0_epc);
printk("ra : %0*lx %pS\n", field, regs->regs[31],
(void *) regs->regs[31]);
printk("Status: %08x ", (uint32_t) regs->cp0_status);
if (cpu_has_3kex) {
if (regs->cp0_status & ST0_KUO)
pr_cont("KUo ");
if (regs->cp0_status & ST0_IEO)
pr_cont("IEo ");
if (regs->cp0_status & ST0_KUP)
pr_cont("KUp ");
if (regs->cp0_status & ST0_IEP)
pr_cont("IEp ");
if (regs->cp0_status & ST0_KUC)
pr_cont("KUc ");
if (regs->cp0_status & ST0_IEC)
pr_cont("IEc ");
} else if (cpu_has_4kex) {
if (regs->cp0_status & ST0_KX)
pr_cont("KX ");
if (regs->cp0_status & ST0_SX)
pr_cont("SX ");
if (regs->cp0_status & ST0_UX)
pr_cont("UX ");
switch (regs->cp0_status & ST0_KSU) {
case KSU_USER:
pr_cont("USER ");
break;
case KSU_SUPERVISOR:
pr_cont("SUPERVISOR ");
break;
case KSU_KERNEL:
pr_cont("KERNEL ");
break;
default:
pr_cont("BAD_MODE ");
break;
}
if (regs->cp0_status & ST0_ERL)
pr_cont("ERL ");
if (regs->cp0_status & ST0_EXL)
pr_cont("EXL ");
if (regs->cp0_status & ST0_IE)
pr_cont("IE ");
}
pr_cont("\n");
exccode = (cause & CAUSEF_EXCCODE) >> CAUSEB_EXCCODE;
printk("Cause : %08x (ExcCode %02x)\n", cause, exccode);
if (1 <= exccode && exccode <= 5)
printk("BadVA : %0*lx\n", field, regs->cp0_badvaddr);
printk("PrId : %08x (%s)\n", read_c0_prid(),
cpu_name_string());
}
/*
* FIXME: really the generic show_regs should take a const pointer argument.
*/
void show_regs(struct pt_regs *regs)
{
__show_regs(regs);
dump_stack();
}
void show_registers(struct pt_regs *regs)
{
const int field = 2 * sizeof(unsigned long);
__show_regs(regs);
print_modules();
printk("Process %s (pid: %d, threadinfo=%p, task=%p, tls=%0*lx)\n",
current->comm, current->pid, current_thread_info(), current,
field, current_thread_info()->tp_value);
if (cpu_has_userlocal) {
unsigned long tls;
tls = read_c0_userlocal();
if (tls != current_thread_info()->tp_value)
printk("*HwTLS: %0*lx\n", field, tls);
}
show_stacktrace(current, regs, KERN_DEFAULT, user_mode(regs));
show_code((void *)regs->cp0_epc, user_mode(regs));
printk("\n");
}
static DEFINE_RAW_SPINLOCK(die_lock);
void __noreturn die(const char *str, struct pt_regs *regs)
{
static int die_counter;
int sig = SIGSEGV;
oops_enter();
if (notify_die(DIE_OOPS, str, regs, 0, current->thread.trap_nr,
SIGSEGV) == NOTIFY_STOP)
sig = 0;
console_verbose();
raw_spin_lock_irq(&die_lock);
bust_spinlocks(1);
printk("%s[#%d]:\n", str, ++die_counter);
show_registers(regs);
add_taint(TAINT_DIE, LOCKDEP_NOW_UNRELIABLE);
raw_spin_unlock_irq(&die_lock);
oops_exit();
if (in_interrupt())
panic("Fatal exception in interrupt");
if (panic_on_oops)
panic("Fatal exception");
if (regs && kexec_should_crash(current))
crash_kexec(regs);
make_task_dead(sig);
}
extern struct exception_table_entry __start___dbe_table[];
extern struct exception_table_entry __stop___dbe_table[];
__asm__(
" .section __dbe_table, \"a\"\n"
" .previous \n");
/* Given an address, look for it in the exception tables. */
static const struct exception_table_entry *search_dbe_tables(unsigned long addr)
{
const struct exception_table_entry *e;
e = search_extable(__start___dbe_table,
__stop___dbe_table - __start___dbe_table, addr);
if (!e)
e = search_module_dbetables(addr);
return e;
}
asmlinkage void do_be(struct pt_regs *regs)
{
const int field = 2 * sizeof(unsigned long);
const struct exception_table_entry *fixup = NULL;
int data = regs->cp0_cause & 4;
int action = MIPS_BE_FATAL;
enum ctx_state prev_state;
prev_state = exception_enter();
/* XXX For now. Fixme, this searches the wrong table ... */
if (data && !user_mode(regs))
fixup = search_dbe_tables(exception_epc(regs));
if (fixup)
action = MIPS_BE_FIXUP;
if (board_be_handler)
action = board_be_handler(regs, fixup != NULL);
else
mips_cm_error_report();
switch (action) {
case MIPS_BE_DISCARD:
goto out;
case MIPS_BE_FIXUP:
if (fixup) {
regs->cp0_epc = fixup->nextinsn;
goto out;
}
break;
default:
break;
}
/*
* Assume it would be too dangerous to continue ...
*/
printk(KERN_ALERT "%s bus error, epc == %0*lx, ra == %0*lx\n",
data ? "Data" : "Instruction",
field, regs->cp0_epc, field, regs->regs[31]);
if (notify_die(DIE_OOPS, "bus error", regs, 0, current->thread.trap_nr,
SIGBUS) == NOTIFY_STOP)
goto out;
die_if_kernel("Oops", regs);
force_sig(SIGBUS);
out:
exception_exit(prev_state);
}
/*
* ll/sc, rdhwr, sync emulation
*/
#define OPCODE 0xfc000000
#define BASE 0x03e00000
#define RT 0x001f0000
#define OFFSET 0x0000ffff
#define LL 0xc0000000
#define SC 0xe0000000
#define SPEC0 0x00000000
#define SPEC3 0x7c000000
#define RD 0x0000f800
#define FUNC 0x0000003f
#define SYNC 0x0000000f
#define RDHWR 0x0000003b
/* microMIPS definitions */
#define MM_POOL32A_FUNC 0xfc00ffff
#define MM_RDHWR 0x00006b3c
#define MM_RS 0x001f0000
#define MM_RT 0x03e00000
/*
* The ll_bit is cleared by r*_switch.S
*/
unsigned int ll_bit;
struct task_struct *ll_task;
static inline int simulate_ll(struct pt_regs *regs, unsigned int opcode)
{
unsigned long value, __user *vaddr;
long offset;
/*
* analyse the ll instruction that just caused a ri exception
* and put the referenced address to addr.
*/
/* sign extend offset */
offset = opcode & OFFSET;
offset <<= 16;
offset >>= 16;
vaddr = (unsigned long __user *)
((unsigned long)(regs->regs[(opcode & BASE) >> 21]) + offset);
if ((unsigned long)vaddr & 3)
return SIGBUS;
if (get_user(value, vaddr))
return SIGSEGV;
preempt_disable();
if (ll_task == NULL || ll_task == current) {
ll_bit = 1;
} else {
ll_bit = 0;
}
ll_task = current;
preempt_enable();
regs->regs[(opcode & RT) >> 16] = value;
return 0;
}
static inline int simulate_sc(struct pt_regs *regs, unsigned int opcode)
{
unsigned long __user *vaddr;
unsigned long reg;
long offset;
/*
* analyse the sc instruction that just caused a ri exception
* and put the referenced address to addr.
*/
/* sign extend offset */
offset = opcode & OFFSET;
offset <<= 16;
offset >>= 16;
vaddr = (unsigned long __user *)
((unsigned long)(regs->regs[(opcode & BASE) >> 21]) + offset);
reg = (opcode & RT) >> 16;
if ((unsigned long)vaddr & 3)
return SIGBUS;
preempt_disable();
if (ll_bit == 0 || ll_task != current) {
regs->regs[reg] = 0;
preempt_enable();
return 0;
}
preempt_enable();
if (put_user(regs->regs[reg], vaddr))
return SIGSEGV;
regs->regs[reg] = 1;
return 0;
}
/*
* ll uses the opcode of lwc0 and sc uses the opcode of swc0. That is both
* opcodes are supposed to result in coprocessor unusable exceptions if
* executed on ll/sc-less processors. That's the theory. In practice a
* few processors such as NEC's VR4100 throw reserved instruction exceptions
* instead, so we're doing the emulation thing in both exception handlers.
*/
static int simulate_llsc(struct pt_regs *regs, unsigned int opcode)
{
if ((opcode & OPCODE) == LL) {
perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS,
1, regs, 0);
return simulate_ll(regs, opcode);
}
if ((opcode & OPCODE) == SC) {
perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS,
1, regs, 0);
return simulate_sc(regs, opcode);
}
return -1; /* Must be something else ... */
}
/*
* Simulate trapping 'rdhwr' instructions to provide user accessible
* registers not implemented in hardware.
*/
static int simulate_rdhwr(struct pt_regs *regs, int rd, int rt)
{
struct thread_info *ti = task_thread_info(current);
perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS,
1, regs, 0);
switch (rd) {
case MIPS_HWR_CPUNUM: /* CPU number */
regs->regs[rt] = smp_processor_id();
return 0;
case MIPS_HWR_SYNCISTEP: /* SYNCI length */
regs->regs[rt] = min(current_cpu_data.dcache.linesz,
current_cpu_data.icache.linesz);
return 0;
case MIPS_HWR_CC: /* Read count register */
regs->regs[rt] = read_c0_count();
return 0;
case MIPS_HWR_CCRES: /* Count register resolution */
switch (current_cpu_type()) {
case CPU_20KC:
case CPU_25KF:
regs->regs[rt] = 1;
break;
default:
regs->regs[rt] = 2;
}
return 0;
case MIPS_HWR_ULR: /* Read UserLocal register */
regs->regs[rt] = ti->tp_value;
return 0;
default:
return -1;
}
}
static int simulate_rdhwr_normal(struct pt_regs *regs, unsigned int opcode)
{
if ((opcode & OPCODE) == SPEC3 && (opcode & FUNC) == RDHWR) {
int rd = (opcode & RD) >> 11;
int rt = (opcode & RT) >> 16;
simulate_rdhwr(regs, rd, rt);
return 0;
}
/* Not ours. */
return -1;
}
static int simulate_rdhwr_mm(struct pt_regs *regs, unsigned int opcode)
{
if ((opcode & MM_POOL32A_FUNC) == MM_RDHWR) {
int rd = (opcode & MM_RS) >> 16;
int rt = (opcode & MM_RT) >> 21;
simulate_rdhwr(regs, rd, rt);
return 0;
}
/* Not ours. */
return -1;
}
static int simulate_sync(struct pt_regs *regs, unsigned int opcode)
{
if ((opcode & OPCODE) == SPEC0 && (opcode & FUNC) == SYNC) {
perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS,
1, regs, 0);
return 0;
}
return -1; /* Must be something else ... */
}
/*
* Loongson-3 CSR instructions emulation
*/
#ifdef CONFIG_CPU_LOONGSON3_CPUCFG_EMULATION
#define LWC2 0xc8000000
#define RS BASE
#define CSR_OPCODE2 0x00000118
#define CSR_OPCODE2_MASK 0x000007ff
#define CSR_FUNC_MASK RT
#define CSR_FUNC_CPUCFG 0x8
static int simulate_loongson3_cpucfg(struct pt_regs *regs,
unsigned int opcode)
{
int op = opcode & OPCODE;
int op2 = opcode & CSR_OPCODE2_MASK;
int csr_func = (opcode & CSR_FUNC_MASK) >> 16;
if (op == LWC2 && op2 == CSR_OPCODE2 && csr_func == CSR_FUNC_CPUCFG) {
int rd = (opcode & RD) >> 11;
int rs = (opcode & RS) >> 21;
__u64 sel = regs->regs[rs];
perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, 1, regs, 0);
/* Do not emulate on unsupported core models. */
preempt_disable();
if (!loongson3_cpucfg_emulation_enabled(&current_cpu_data)) {
preempt_enable();
return -1;
}
regs->regs[rd] = loongson3_cpucfg_read_synthesized(
&current_cpu_data, sel);
preempt_enable();
return 0;
}
/* Not ours. */
return -1;
}
#endif /* CONFIG_CPU_LOONGSON3_CPUCFG_EMULATION */
asmlinkage void do_ov(struct pt_regs *regs)
{
enum ctx_state prev_state;
prev_state = exception_enter();
die_if_kernel("Integer overflow", regs);
force_sig_fault(SIGFPE, FPE_INTOVF, (void __user *)regs->cp0_epc);
exception_exit(prev_state);
}
#ifdef CONFIG_MIPS_FP_SUPPORT
/*
* Send SIGFPE according to FCSR Cause bits, which must have already
* been masked against Enable bits. This is impotant as Inexact can
* happen together with Overflow or Underflow, and `ptrace' can set
* any bits.
*/
void force_fcr31_sig(unsigned long fcr31, void __user *fault_addr,
struct task_struct *tsk)
{
int si_code = FPE_FLTUNK;
if (fcr31 & FPU_CSR_INV_X)
si_code = FPE_FLTINV;
else if (fcr31 & FPU_CSR_DIV_X)
si_code = FPE_FLTDIV;
else if (fcr31 & FPU_CSR_OVF_X)
si_code = FPE_FLTOVF;
else if (fcr31 & FPU_CSR_UDF_X)
si_code = FPE_FLTUND;
else if (fcr31 & FPU_CSR_INE_X)
si_code = FPE_FLTRES;
force_sig_fault_to_task(SIGFPE, si_code, fault_addr, tsk);
}
int process_fpemu_return(int sig, void __user *fault_addr, unsigned long fcr31)
{
int si_code;
switch (sig) {
case 0:
return 0;
case SIGFPE:
force_fcr31_sig(fcr31, fault_addr, current);
return 1;
case SIGBUS:
force_sig_fault(SIGBUS, BUS_ADRERR, fault_addr);
return 1;
case SIGSEGV:
mmap_read_lock(current->mm);
if (vma_lookup(current->mm, (unsigned long)fault_addr))
si_code = SEGV_ACCERR;
else
si_code = SEGV_MAPERR;
mmap_read_unlock(current->mm);
force_sig_fault(SIGSEGV, si_code, fault_addr);
return 1;
default:
force_sig(sig);
return 1;
}
}
static int simulate_fp(struct pt_regs *regs, unsigned int opcode,
unsigned long old_epc, unsigned long old_ra)
{
union mips_instruction inst = { .word = opcode };
void __user *fault_addr;
unsigned long fcr31;
int sig;
/* If it's obviously not an FP instruction, skip it */
switch (inst.i_format.opcode) {
case cop1_op:
case cop1x_op:
case lwc1_op:
case ldc1_op:
case swc1_op:
case sdc1_op:
break;
default:
return -1;
}
/*
* do_ri skipped over the instruction via compute_return_epc, undo
* that for the FPU emulator.
*/
regs->cp0_epc = old_epc;
regs->regs[31] = old_ra;
/* Run the emulator */
sig = fpu_emulator_cop1Handler(regs, &current->thread.fpu, 1,
&fault_addr);
/*
* We can't allow the emulated instruction to leave any
* enabled Cause bits set in $fcr31.
*/
fcr31 = mask_fcr31_x(current->thread.fpu.fcr31);
current->thread.fpu.fcr31 &= ~fcr31;
/* Restore the hardware register state */
own_fpu(1);
/* Send a signal if required. */
process_fpemu_return(sig, fault_addr, fcr31);
return 0;
}
/*
* XXX Delayed fp exceptions when doing a lazy ctx switch XXX
*/
asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
{
enum ctx_state prev_state;
void __user *fault_addr;
int sig;
prev_state = exception_enter();
if (notify_die(DIE_FP, "FP exception", regs, 0, current->thread.trap_nr,
SIGFPE) == NOTIFY_STOP)
goto out;
/* Clear FCSR.Cause before enabling interrupts */
write_32bit_cp1_register(CP1_STATUS, fcr31 & ~mask_fcr31_x(fcr31));
local_irq_enable();
die_if_kernel("FP exception in kernel code", regs);
if (fcr31 & FPU_CSR_UNI_X) {
/*
* Unimplemented operation exception. If we've got the full
* software emulator on-board, let's use it...
*
* Force FPU to dump state into task/thread context. We're
* moving a lot of data here for what is probably a single
* instruction, but the alternative is to pre-decode the FP
* register operands before invoking the emulator, which seems
* a bit extreme for what should be an infrequent event.
*/
/* Run the emulator */
sig = fpu_emulator_cop1Handler(regs, &current->thread.fpu, 1,
&fault_addr);
/*
* We can't allow the emulated instruction to leave any
* enabled Cause bits set in $fcr31.
*/
fcr31 = mask_fcr31_x(current->thread.fpu.fcr31);
current->thread.fpu.fcr31 &= ~fcr31;
/* Restore the hardware register state */
own_fpu(1); /* Using the FPU again. */
} else {
sig = SIGFPE;
fault_addr = (void __user *) regs->cp0_epc;
}
/* Send a signal if required. */
process_fpemu_return(sig, fault_addr, fcr31);
out:
exception_exit(prev_state);
}
/*
* MIPS MT processors may have fewer FPU contexts than CPU threads. If we've
* emulated more than some threshold number of instructions, force migration to
* a "CPU" that has FP support.
*/
static void mt_ase_fp_affinity(void)
{
#ifdef CONFIG_MIPS_MT_FPAFF
if (mt_fpemul_threshold > 0 &&
((current->thread.emulated_fp++ > mt_fpemul_threshold))) {
/*
* If there's no FPU present, or if the application has already
* restricted the allowed set to exclude any CPUs with FPUs,
* we'll skip the procedure.
*/
if (cpumask_intersects(&current->cpus_mask, &mt_fpu_cpumask)) {
cpumask_t tmask;
current->thread.user_cpus_allowed
= current->cpus_mask;
cpumask_and(&tmask, &current->cpus_mask,
&mt_fpu_cpumask);
set_cpus_allowed_ptr(current, &tmask);
set_thread_flag(TIF_FPUBOUND);
}
}
#endif /* CONFIG_MIPS_MT_FPAFF */
}
#else /* !CONFIG_MIPS_FP_SUPPORT */
static int simulate_fp(struct pt_regs *regs, unsigned int opcode,
unsigned long old_epc, unsigned long old_ra)
{
return -1;
}
#endif /* !CONFIG_MIPS_FP_SUPPORT */
void do_trap_or_bp(struct pt_regs *regs, unsigned int code, int si_code,
const char *str)
{
char b[40];
#ifdef CONFIG_KGDB_LOW_LEVEL_TRAP
if (kgdb_ll_trap(DIE_TRAP, str, regs, code, current->thread.trap_nr,
SIGTRAP) == NOTIFY_STOP)
return;
#endif /* CONFIG_KGDB_LOW_LEVEL_TRAP */
if (notify_die(DIE_TRAP, str, regs, code, current->thread.trap_nr,
SIGTRAP) == NOTIFY_STOP)
return;
/*
* A short test says that IRIX 5.3 sends SIGTRAP for all trap
* insns, even for trap and break codes that indicate arithmetic
* failures. Weird ...
* But should we continue the brokenness??? --macro
*/
switch (code) {
case BRK_OVERFLOW:
case BRK_DIVZERO:
scnprintf(b, sizeof(b), "%s instruction in kernel code", str);
die_if_kernel(b, regs);
force_sig_fault(SIGFPE,
code == BRK_DIVZERO ? FPE_INTDIV : FPE_INTOVF,
(void __user *) regs->cp0_epc);
break;
case BRK_BUG:
die_if_kernel("Kernel bug detected", regs);
force_sig(SIGTRAP);
break;
case BRK_MEMU:
/*
* This breakpoint code is used by the FPU emulator to retake
* control of the CPU after executing the instruction from the
* delay slot of an emulated branch.
*
* Terminate if exception was recognized as a delay slot return
* otherwise handle as normal.
*/
if (do_dsemulret(regs))
return;
die_if_kernel("Math emu break/trap", regs);
force_sig(SIGTRAP);
break;
default:
scnprintf(b, sizeof(b), "%s instruction in kernel code", str);
die_if_kernel(b, regs);
if (si_code) {
force_sig_fault(SIGTRAP, si_code, NULL);
} else {
force_sig(SIGTRAP);
}
}
}
asmlinkage void do_bp(struct pt_regs *regs)
{
unsigned long epc = msk_isa16_mode(exception_epc(regs));
unsigned int opcode, bcode;
enum ctx_state prev_state;
bool user = user_mode(regs);
prev_state = exception_enter();
current->thread.trap_nr = (regs->cp0_cause >> 2) & 0x1f;
if (get_isa16_mode(regs->cp0_epc)) {
u16 instr[2];
if (__get_inst16(&instr[0], (u16 *)epc, user))
goto out_sigsegv;
if (!cpu_has_mmips) {
/* MIPS16e mode */
bcode = (instr[0] >> 5) & 0x3f;
} else if (mm_insn_16bit(instr[0])) {
/* 16-bit microMIPS BREAK */
bcode = instr[0] & 0xf;
} else {
/* 32-bit microMIPS BREAK */
if (__get_inst16(&instr[1], (u16 *)(epc + 2), user))
goto out_sigsegv;
opcode = (instr[0] << 16) | instr[1];
bcode = (opcode >> 6) & ((1 << 20) - 1);
}
} else {
if (__get_inst32(&opcode, (u32 *)epc, user))
goto out_sigsegv;
bcode = (opcode >> 6) & ((1 << 20) - 1);
}
/*
* There is the ancient bug in the MIPS assemblers that the break
* code starts left to bit 16 instead to bit 6 in the opcode.
* Gas is bug-compatible, but not always, grrr...
* We handle both cases with a simple heuristics. --macro
*/
if (bcode >= (1 << 10))
bcode = ((bcode & ((1 << 10) - 1)) << 10) | (bcode >> 10);
/*
* notify the kprobe handlers, if instruction is likely to
* pertain to them.
*/
switch (bcode) {
case BRK_UPROBE:
if (notify_die(DIE_UPROBE, "uprobe", regs, bcode,
current->thread.trap_nr, SIGTRAP) == NOTIFY_STOP)
goto out;
else
break;
case BRK_UPROBE_XOL:
if (notify_die(DIE_UPROBE_XOL, "uprobe_xol", regs, bcode,
current->thread.trap_nr, SIGTRAP) == NOTIFY_STOP)
goto out;
else
break;
case BRK_KPROBE_BP:
if (notify_die(DIE_BREAK, "debug", regs, bcode,
current->thread.trap_nr, SIGTRAP) == NOTIFY_STOP)
goto out;
else
break;
case BRK_KPROBE_SSTEPBP:
if (notify_die(DIE_SSTEPBP, "single_step", regs, bcode,
current->thread.trap_nr, SIGTRAP) == NOTIFY_STOP)
goto out;
else
break;
default:
break;
}
do_trap_or_bp(regs, bcode, TRAP_BRKPT, "Break");
out:
exception_exit(prev_state);
return;
out_sigsegv:
force_sig(SIGSEGV);
goto out;
}
asmlinkage void do_tr(struct pt_regs *regs)
{
u32 opcode, tcode = 0;
enum ctx_state prev_state;
u16 instr[2];
bool user = user_mode(regs);
unsigned long epc = msk_isa16_mode(exception_epc(regs));
prev_state = exception_enter();
current->thread.trap_nr = (regs->cp0_cause >> 2) & 0x1f;
if (get_isa16_mode(regs->cp0_epc)) {
if (__get_inst16(&instr[0], (u16 *)(epc + 0), user) ||
__get_inst16(&instr[1], (u16 *)(epc + 2), user))
goto out_sigsegv;
opcode = (instr[0] << 16) | instr[1];
/* Immediate versions don't provide a code. */
if (!(opcode & OPCODE))
tcode = (opcode >> 12) & ((1 << 4) - 1);
} else {
if (__get_inst32(&opcode, (u32 *)epc, user))
goto out_sigsegv;
/* Immediate versions don't provide a code. */
if (!(opcode & OPCODE))
tcode = (opcode >> 6) & ((1 << 10) - 1);
}
do_trap_or_bp(regs, tcode, 0, "Trap");
out:
exception_exit(prev_state);
return;
out_sigsegv:
force_sig(SIGSEGV);
goto out;
}
asmlinkage void do_ri(struct pt_regs *regs)
{
unsigned int __user *epc = (unsigned int __user *)exception_epc(regs);
unsigned long old_epc = regs->cp0_epc;
unsigned long old31 = regs->regs[31];
enum ctx_state prev_state;
unsigned int opcode = 0;
int status = -1;
/*
* Avoid any kernel code. Just emulate the R2 instruction
* as quickly as possible.
*/
if (mipsr2_emulation && cpu_has_mips_r6 &&
likely(user_mode(regs)) &&
likely(get_user(opcode, epc) >= 0)) {
unsigned long fcr31 = 0;
status = mipsr2_decoder(regs, opcode, &fcr31);
switch (status) {
case 0:
case SIGEMT:
return;
case SIGILL:
goto no_r2_instr;
default:
process_fpemu_return(status,
&current->thread.cp0_baduaddr,
fcr31);
return;
}
}
no_r2_instr:
prev_state = exception_enter();
current->thread.trap_nr = (regs->cp0_cause >> 2) & 0x1f;
if (notify_die(DIE_RI, "RI Fault", regs, 0, current->thread.trap_nr,
SIGILL) == NOTIFY_STOP)
goto out;
die_if_kernel("Reserved instruction in kernel code", regs);
if (unlikely(compute_return_epc(regs) < 0))
goto out;
if (!get_isa16_mode(regs->cp0_epc)) {
if (unlikely(get_user(opcode, epc) < 0))
status = SIGSEGV;
if (!cpu_has_llsc && status < 0)
status = simulate_llsc(regs, opcode);
if (status < 0)
status = simulate_rdhwr_normal(regs, opcode);
if (status < 0)
status = simulate_sync(regs, opcode);
if (status < 0)
status = simulate_fp(regs, opcode, old_epc, old31);
#ifdef CONFIG_CPU_LOONGSON3_CPUCFG_EMULATION
if (status < 0)
status = simulate_loongson3_cpucfg(regs, opcode);
#endif
} else if (cpu_has_mmips) {
unsigned short mmop[2] = { 0 };
if (unlikely(get_user(mmop[0], (u16 __user *)epc + 0) < 0))
status = SIGSEGV;
if (unlikely(get_user(mmop[1], (u16 __user *)epc + 1) < 0))
status = SIGSEGV;
opcode = mmop[0];
opcode = (opcode << 16) | mmop[1];
if (status < 0)
status = simulate_rdhwr_mm(regs, opcode);
}
if (status < 0)
status = SIGILL;
if (unlikely(status > 0)) {
regs->cp0_epc = old_epc; /* Undo skip-over. */
regs->regs[31] = old31;
force_sig(status);
}
out:
exception_exit(prev_state);
}
/*
* No lock; only written during early bootup by CPU 0.
*/
static RAW_NOTIFIER_HEAD(cu2_chain);
int __ref register_cu2_notifier(struct notifier_block *nb)
{
return raw_notifier_chain_register(&cu2_chain, nb);
}
int cu2_notifier_call_chain(unsigned long val, void *v)
{
return raw_notifier_call_chain(&cu2_chain, val, v);
}
static int default_cu2_call(struct notifier_block *nfb, unsigned long action,
void *data)
{
struct pt_regs *regs = data;
die_if_kernel("COP2: Unhandled kernel unaligned access or invalid "
"instruction", regs);
force_sig(SIGILL);
return NOTIFY_OK;
}
#ifdef CONFIG_MIPS_FP_SUPPORT
static int enable_restore_fp_context(int msa)
{
int err, was_fpu_owner, prior_msa;
bool first_fp;
/* Initialize context if it hasn't been used already */
first_fp = init_fp_ctx(current);
if (first_fp) {
preempt_disable();
err = own_fpu_inatomic(1);
if (msa && !err) {
enable_msa();
/*
* with MSA enabled, userspace can see MSACSR
* and MSA regs, but the values in them are from
* other task before current task, restore them
* from saved fp/msa context
*/
write_msa_csr(current->thread.fpu.msacsr);
/*
* own_fpu_inatomic(1) just restore low 64bit,
* fix the high 64bit
*/
init_msa_upper();
set_thread_flag(TIF_USEDMSA);
set_thread_flag(TIF_MSA_CTX_LIVE);
}
preempt_enable();
return err;
}
/*
* This task has formerly used the FP context.
*
* If this thread has no live MSA vector context then we can simply
* restore the scalar FP context. If it has live MSA vector context
* (that is, it has or may have used MSA since last performing a
* function call) then we'll need to restore the vector context. This
* applies even if we're currently only executing a scalar FP
* instruction. This is because if we were to later execute an MSA
* instruction then we'd either have to:
*
* - Restore the vector context & clobber any registers modified by
* scalar FP instructions between now & then.
*
* or
*
* - Not restore the vector context & lose the most significant bits
* of all vector registers.
*
* Neither of those options is acceptable. We cannot restore the least
* significant bits of the registers now & only restore the most
* significant bits later because the most significant bits of any
* vector registers whose aliased FP register is modified now will have
* been zeroed. We'd have no way to know that when restoring the vector
* context & thus may load an outdated value for the most significant
* bits of a vector register.
*/
if (!msa && !thread_msa_context_live())
return own_fpu(1);
/*
* This task is using or has previously used MSA. Thus we require
* that Status.FR == 1.
*/
preempt_disable();
was_fpu_owner = is_fpu_owner();
err = own_fpu_inatomic(0);
if (err)
goto out;
enable_msa();
write_msa_csr(current->thread.fpu.msacsr);
set_thread_flag(TIF_USEDMSA);
/*
* If this is the first time that the task is using MSA and it has
* previously used scalar FP in this time slice then we already nave
* FP context which we shouldn't clobber. We do however need to clear
* the upper 64b of each vector register so that this task has no
* opportunity to see data left behind by another.
*/
prior_msa = test_and_set_thread_flag(TIF_MSA_CTX_LIVE);
if (!prior_msa && was_fpu_owner) {
init_msa_upper();
goto out;
}
if (!prior_msa) {
/*
* Restore the least significant 64b of each vector register
* from the existing scalar FP context.
*/
_restore_fp(current);
/*
* The task has not formerly used MSA, so clear the upper 64b
* of each vector register such that it cannot see data left
* behind by another task.
*/
init_msa_upper();
} else {
/* We need to restore the vector context. */
restore_msa(current);
/* Restore the scalar FP control & status register */
if (!was_fpu_owner)
write_32bit_cp1_register(CP1_STATUS,
current->thread.fpu.fcr31);
}
out:
preempt_enable();
return 0;
}
#else /* !CONFIG_MIPS_FP_SUPPORT */
static int enable_restore_fp_context(int msa)
{
return SIGILL;
}
#endif /* CONFIG_MIPS_FP_SUPPORT */
asmlinkage void do_cpu(struct pt_regs *regs)
{
enum ctx_state prev_state;
unsigned int __user *epc;
unsigned long old_epc, old31;
unsigned int opcode;
unsigned int cpid;
int status;
prev_state = exception_enter();
cpid = (regs->cp0_cause >> CAUSEB_CE) & 3;
if (cpid != 2)
die_if_kernel("do_cpu invoked from kernel context!", regs);
switch (cpid) {
case 0:
epc = (unsigned int __user *)exception_epc(regs);
old_epc = regs->cp0_epc;
old31 = regs->regs[31];
opcode = 0;
status = -1;
if (unlikely(compute_return_epc(regs) < 0))
break;
if (!get_isa16_mode(regs->cp0_epc)) {
if (unlikely(get_user(opcode, epc) < 0))
status = SIGSEGV;
if (!cpu_has_llsc && status < 0)
status = simulate_llsc(regs, opcode);
}
if (status < 0)
status = SIGILL;
if (unlikely(status > 0)) {
regs->cp0_epc = old_epc; /* Undo skip-over. */
regs->regs[31] = old31;
force_sig(status);
}
break;
#ifdef CONFIG_MIPS_FP_SUPPORT
case 3:
/*
* The COP3 opcode space and consequently the CP0.Status.CU3
* bit and the CP0.Cause.CE=3 encoding have been removed as
* of the MIPS III ISA. From the MIPS IV and MIPS32r2 ISAs
* up the space has been reused for COP1X instructions, that
* are enabled by the CP0.Status.CU1 bit and consequently
* use the CP0.Cause.CE=1 encoding for Coprocessor Unusable
* exceptions. Some FPU-less processors that implement one
* of these ISAs however use this code erroneously for COP1X
* instructions. Therefore we redirect this trap to the FP
* emulator too.
*/
if (raw_cpu_has_fpu || !cpu_has_mips_4_5_64_r2_r6) {
force_sig(SIGILL);
break;
}
fallthrough;
case 1: {
void __user *fault_addr;
unsigned long fcr31;
int err, sig;
err = enable_restore_fp_context(0);
if (raw_cpu_has_fpu && !err)
break;
sig = fpu_emulator_cop1Handler(regs, &current->thread.fpu, 0,
&fault_addr);
/*
* We can't allow the emulated instruction to leave
* any enabled Cause bits set in $fcr31.
*/
fcr31 = mask_fcr31_x(current->thread.fpu.fcr31);
current->thread.fpu.fcr31 &= ~fcr31;
/* Send a signal if required. */
if (!process_fpemu_return(sig, fault_addr, fcr31) && !err)
mt_ase_fp_affinity();
break;
}
#else /* CONFIG_MIPS_FP_SUPPORT */
case 1:
case 3:
force_sig(SIGILL);
break;
#endif /* CONFIG_MIPS_FP_SUPPORT */
case 2:
raw_notifier_call_chain(&cu2_chain, CU2_EXCEPTION, regs);
break;
}
exception_exit(prev_state);
}
asmlinkage void do_msa_fpe(struct pt_regs *regs, unsigned int msacsr)
{
enum ctx_state prev_state;
prev_state = exception_enter();
current->thread.trap_nr = (regs->cp0_cause >> 2) & 0x1f;
if (notify_die(DIE_MSAFP, "MSA FP exception", regs, 0,
current->thread.trap_nr, SIGFPE) == NOTIFY_STOP)
goto out;
/* Clear MSACSR.Cause before enabling interrupts */
write_msa_csr(msacsr & ~MSA_CSR_CAUSEF);
local_irq_enable();
die_if_kernel("do_msa_fpe invoked from kernel context!", regs);
force_sig(SIGFPE);
out:
exception_exit(prev_state);
}
asmlinkage void do_msa(struct pt_regs *regs)
{
enum ctx_state prev_state;
int err;
prev_state = exception_enter();
if (!cpu_has_msa || test_thread_flag(TIF_32BIT_FPREGS)) {
force_sig(SIGILL);
goto out;
}
die_if_kernel("do_msa invoked from kernel context!", regs);
err = enable_restore_fp_context(1);
if (err)
force_sig(SIGILL);
out:
exception_exit(prev_state);
}
asmlinkage void do_mdmx(struct pt_regs *regs)
{
enum ctx_state prev_state;
prev_state = exception_enter();
force_sig(SIGILL);
exception_exit(prev_state);
}
/*
* Called with interrupts disabled.
*/
asmlinkage void do_watch(struct pt_regs *regs)
{
enum ctx_state prev_state;
prev_state = exception_enter();
/*
* Clear WP (bit 22) bit of cause register so we don't loop
* forever.
*/
clear_c0_cause(CAUSEF_WP);
/*
* If the current thread has the watch registers loaded, save
* their values and send SIGTRAP. Otherwise another thread
* left the registers set, clear them and continue.
*/
if (test_tsk_thread_flag(current, TIF_LOAD_WATCH)) {
mips_read_watch_registers();
local_irq_enable();
force_sig_fault(SIGTRAP, TRAP_HWBKPT, NULL);
} else {
mips_clear_watch_registers();
local_irq_enable();
}
exception_exit(prev_state);
}
asmlinkage void do_mcheck(struct pt_regs *regs)
{
int multi_match = regs->cp0_status & ST0_TS;
enum ctx_state prev_state;
prev_state = exception_enter();
show_regs(regs);
if (multi_match) {
dump_tlb_regs();
pr_info("\n");
dump_tlb_all();
}
show_code((void *)regs->cp0_epc, user_mode(regs));
/*
* Some chips may have other causes of machine check (e.g. SB1
* graduation timer)
*/
panic("Caught Machine Check exception - %scaused by multiple "
"matching entries in the TLB.",
(multi_match) ? "" : "not ");
}
asmlinkage void do_mt(struct pt_regs *regs)
{
int subcode;
subcode = (read_vpe_c0_vpecontrol() & VPECONTROL_EXCPT)
>> VPECONTROL_EXCPT_SHIFT;
switch (subcode) {
case 0:
printk(KERN_DEBUG "Thread Underflow\n");
break;
case 1:
printk(KERN_DEBUG "Thread Overflow\n");
break;
case 2:
printk(KERN_DEBUG "Invalid YIELD Qualifier\n");
break;
case 3:
printk(KERN_DEBUG "Gating Storage Exception\n");
break;
case 4:
printk(KERN_DEBUG "YIELD Scheduler Exception\n");
break;
case 5:
printk(KERN_DEBUG "Gating Storage Scheduler Exception\n");
break;
default:
printk(KERN_DEBUG "*** UNKNOWN THREAD EXCEPTION %d ***\n",
subcode);
break;
}
die_if_kernel("MIPS MT Thread exception in kernel", regs);
force_sig(SIGILL);
}
asmlinkage void do_dsp(struct pt_regs *regs)
{
if (cpu_has_dsp)
panic("Unexpected DSP exception");
force_sig(SIGILL);
}
asmlinkage void do_reserved(struct pt_regs *regs)
{
/*
* Game over - no way to handle this if it ever occurs. Most probably
* caused by a new unknown cpu type or after another deadly
* hard/software error.
*/
show_regs(regs);
panic("Caught reserved exception %ld - should not happen.",
(regs->cp0_cause & 0x7f) >> 2);
}
static int __initdata l1parity = 1;
static int __init nol1parity(char *s)
{
l1parity = 0;
return 1;
}
__setup("nol1par", nol1parity);
static int __initdata l2parity = 1;
static int __init nol2parity(char *s)
{
l2parity = 0;
return 1;
}
__setup("nol2par", nol2parity);
/*
* Some MIPS CPUs can enable/disable for cache parity detection, but do
* it different ways.
*/
static inline __init void parity_protection_init(void)
{
#define ERRCTL_PE 0x80000000
#define ERRCTL_L2P 0x00800000
if (mips_cm_revision() >= CM_REV_CM3) {
ulong gcr_ectl, cp0_ectl;
/*
* With CM3 systems we need to ensure that the L1 & L2
* parity enables are set to the same value, since this
* is presumed by the hardware engineers.
*
* If the user disabled either of L1 or L2 ECC checking,
* disable both.
*/
l1parity &= l2parity;
l2parity &= l1parity;
/* Probe L1 ECC support */
cp0_ectl = read_c0_ecc();
write_c0_ecc(cp0_ectl | ERRCTL_PE);
back_to_back_c0_hazard();
cp0_ectl = read_c0_ecc();
/* Probe L2 ECC support */
gcr_ectl = read_gcr_err_control();
if (!(gcr_ectl & CM_GCR_ERR_CONTROL_L2_ECC_SUPPORT) ||
!(cp0_ectl & ERRCTL_PE)) {
/*
* One of L1 or L2 ECC checking isn't supported,
* so we cannot enable either.
*/
l1parity = l2parity = 0;
}
/* Configure L1 ECC checking */
if (l1parity)
cp0_ectl |= ERRCTL_PE;
else
cp0_ectl &= ~ERRCTL_PE;
write_c0_ecc(cp0_ectl);
back_to_back_c0_hazard();
WARN_ON(!!(read_c0_ecc() & ERRCTL_PE) != l1parity);
/* Configure L2 ECC checking */
if (l2parity)
gcr_ectl |= CM_GCR_ERR_CONTROL_L2_ECC_EN;
else
gcr_ectl &= ~CM_GCR_ERR_CONTROL_L2_ECC_EN;
write_gcr_err_control(gcr_ectl);
gcr_ectl = read_gcr_err_control();
gcr_ectl &= CM_GCR_ERR_CONTROL_L2_ECC_EN;
WARN_ON(!!gcr_ectl != l2parity);
pr_info("Cache parity protection %sabled\n",
l1parity ? "en" : "dis");
return;
}
switch (current_cpu_type()) {
case CPU_24K:
case CPU_34K:
case CPU_74K:
case CPU_1004K:
case CPU_1074K:
case CPU_INTERAPTIV:
case CPU_PROAPTIV:
case CPU_P5600:
case CPU_QEMU_GENERIC:
case CPU_P6600:
{
unsigned long errctl;
unsigned int l1parity_present, l2parity_present;
errctl = read_c0_ecc();
errctl &= ~(ERRCTL_PE|ERRCTL_L2P);
/* probe L1 parity support */
write_c0_ecc(errctl | ERRCTL_PE);
back_to_back_c0_hazard();
l1parity_present = (read_c0_ecc() & ERRCTL_PE);
/* probe L2 parity support */
write_c0_ecc(errctl|ERRCTL_L2P);
back_to_back_c0_hazard();
l2parity_present = (read_c0_ecc() & ERRCTL_L2P);
if (l1parity_present && l2parity_present) {
if (l1parity)
errctl |= ERRCTL_PE;
if (l1parity ^ l2parity)
errctl |= ERRCTL_L2P;
} else if (l1parity_present) {
if (l1parity)
errctl |= ERRCTL_PE;
} else if (l2parity_present) {
if (l2parity)
errctl |= ERRCTL_L2P;
} else {
/* No parity available */
}
printk(KERN_INFO "Writing ErrCtl register=%08lx\n", errctl);
write_c0_ecc(errctl);
back_to_back_c0_hazard();
errctl = read_c0_ecc();
printk(KERN_INFO "Readback ErrCtl register=%08lx\n", errctl);
if (l1parity_present)
printk(KERN_INFO "Cache parity protection %sabled\n",
(errctl & ERRCTL_PE) ? "en" : "dis");
if (l2parity_present) {
if (l1parity_present && l1parity)
errctl ^= ERRCTL_L2P;
printk(KERN_INFO "L2 cache parity protection %sabled\n",
(errctl & ERRCTL_L2P) ? "en" : "dis");
}
}
break;
case CPU_5KC:
case CPU_5KE:
case CPU_LOONGSON32:
write_c0_ecc(0x80000000);
back_to_back_c0_hazard();
/* Set the PE bit (bit 31) in the c0_errctl register. */
printk(KERN_INFO "Cache parity protection %sabled\n",
(read_c0_ecc() & 0x80000000) ? "en" : "dis");
break;
case CPU_20KC:
case CPU_25KF:
/* Clear the DE bit (bit 16) in the c0_status register. */
printk(KERN_INFO "Enable cache parity protection for "
"MIPS 20KC/25KF CPUs.\n");
clear_c0_status(ST0_DE);
break;
default:
break;
}
}
asmlinkage void cache_parity_error(void)
{
const int field = 2 * sizeof(unsigned long);
unsigned int reg_val;
/* For the moment, report the problem and hang. */
printk("Cache error exception:\n");
printk("cp0_errorepc == %0*lx\n", field, read_c0_errorepc());
reg_val = read_c0_cacheerr();
printk("c0_cacheerr == %08x\n", reg_val);
printk("Decoded c0_cacheerr: %s cache fault in %s reference.\n",
reg_val & (1<<30) ? "secondary" : "primary",
reg_val & (1<<31) ? "data" : "insn");
if ((cpu_has_mips_r2_r6) &&
((current_cpu_data.processor_id & 0xff0000) == PRID_COMP_MIPS)) {
pr_err("Error bits: %s%s%s%s%s%s%s%s\n",
reg_val & (1<<29) ? "ED " : "",
reg_val & (1<<28) ? "ET " : "",
reg_val & (1<<27) ? "ES " : "",
reg_val & (1<<26) ? "EE " : "",
reg_val & (1<<25) ? "EB " : "",
reg_val & (1<<24) ? "EI " : "",
reg_val & (1<<23) ? "E1 " : "",
reg_val & (1<<22) ? "E0 " : "");
} else {
pr_err("Error bits: %s%s%s%s%s%s%s\n",
reg_val & (1<<29) ? "ED " : "",
reg_val & (1<<28) ? "ET " : "",
reg_val & (1<<26) ? "EE " : "",
reg_val & (1<<25) ? "EB " : "",
reg_val & (1<<24) ? "EI " : "",
reg_val & (1<<23) ? "E1 " : "",
reg_val & (1<<22) ? "E0 " : "");
}
printk("IDX: 0x%08x\n", reg_val & ((1<<22)-1));
#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
if (reg_val & (1<<22))
printk("DErrAddr0: 0x%0*lx\n", field, read_c0_derraddr0());
if (reg_val & (1<<23))
printk("DErrAddr1: 0x%0*lx\n", field, read_c0_derraddr1());
#endif
panic("Can't handle the cache error!");
}
asmlinkage void do_ftlb(void)
{
const int field = 2 * sizeof(unsigned long);
unsigned int reg_val;
/* For the moment, report the problem and hang. */
if ((cpu_has_mips_r2_r6) &&
(((current_cpu_data.processor_id & 0xff0000) == PRID_COMP_MIPS) ||
((current_cpu_data.processor_id & 0xff0000) == PRID_COMP_LOONGSON))) {
pr_err("FTLB error exception, cp0_ecc=0x%08x:\n",
read_c0_ecc());
pr_err("cp0_errorepc == %0*lx\n", field, read_c0_errorepc());
reg_val = read_c0_cacheerr();
pr_err("c0_cacheerr == %08x\n", reg_val);
if ((reg_val & 0xc0000000) == 0xc0000000) {
pr_err("Decoded c0_cacheerr: FTLB parity error\n");
} else {
pr_err("Decoded c0_cacheerr: %s cache fault in %s reference.\n",
reg_val & (1<<30) ? "secondary" : "primary",
reg_val & (1<<31) ? "data" : "insn");
}
} else {
pr_err("FTLB error exception\n");
}
/* Just print the cacheerr bits for now */
cache_parity_error();
}
asmlinkage void do_gsexc(struct pt_regs *regs, u32 diag1)
{
u32 exccode = (diag1 & LOONGSON_DIAG1_EXCCODE) >>
LOONGSON_DIAG1_EXCCODE_SHIFT;
enum ctx_state prev_state;
prev_state = exception_enter();
switch (exccode) {
case 0x08:
/* Undocumented exception, will trigger on certain
* also-undocumented instructions accessible from userspace.
* Processor state is not otherwise corrupted, but currently
* we don't know how to proceed. Maybe there is some
* undocumented control flag to enable the instructions?
*/
force_sig(SIGILL);
break;
default:
/* None of the other exceptions, documented or not, have
* further details given; none are encountered in the wild
* either. Panic in case some of them turn out to be fatal.
*/
show_regs(regs);
panic("Unhandled Loongson exception - GSCause = %08x", diag1);
}
exception_exit(prev_state);
}
/*
* SDBBP EJTAG debug exception handler.
* We skip the instruction and return to the next instruction.
*/
void ejtag_exception_handler(struct pt_regs *regs)
{
const int field = 2 * sizeof(unsigned long);
unsigned long depc, old_epc, old_ra;
unsigned int debug;
printk(KERN_DEBUG "SDBBP EJTAG debug exception - not handled yet, just ignored!\n");
depc = read_c0_depc();
debug = read_c0_debug();
printk(KERN_DEBUG "c0_depc = %0*lx, DEBUG = %08x\n", field, depc, debug);
if (debug & 0x80000000) {
/*
* In branch delay slot.
* We cheat a little bit here and use EPC to calculate the
* debug return address (DEPC). EPC is restored after the
* calculation.
*/
old_epc = regs->cp0_epc;
old_ra = regs->regs[31];
regs->cp0_epc = depc;
compute_return_epc(regs);
depc = regs->cp0_epc;
regs->cp0_epc = old_epc;
regs->regs[31] = old_ra;
} else
depc += 4;
write_c0_depc(depc);
#if 0
printk(KERN_DEBUG "\n\n----- Enable EJTAG single stepping ----\n\n");
write_c0_debug(debug | 0x100);
#endif
}
/*
* NMI exception handler.
* No lock; only written during early bootup by CPU 0.
*/
static RAW_NOTIFIER_HEAD(nmi_chain);
int register_nmi_notifier(struct notifier_block *nb)
{
return raw_notifier_chain_register(&nmi_chain, nb);
}
void __noreturn nmi_exception_handler(struct pt_regs *regs)
{
char str[100];
nmi_enter();
raw_notifier_call_chain(&nmi_chain, 0, regs);
bust_spinlocks(1);
snprintf(str, 100, "CPU%d NMI taken, CP0_EPC=%lx\n",
smp_processor_id(), regs->cp0_epc);
regs->cp0_epc = read_c0_errorepc();
die(str, regs);
nmi_exit();
}
unsigned long ebase;
EXPORT_SYMBOL_GPL(ebase);
unsigned long exception_handlers[32];
unsigned long vi_handlers[64];
void reserve_exception_space(phys_addr_t addr, unsigned long size)
{
/*
* reserve exception space on CPUs other than CPU0
* is too late, since memblock is unavailable when APs
* up
*/
if (smp_processor_id() == 0)
memblock_reserve(addr, size);
}
void __init *set_except_vector(int n, void *addr)
{
unsigned long handler = (unsigned long) addr;
unsigned long old_handler;
#ifdef CONFIG_CPU_MICROMIPS
/*
* Only the TLB handlers are cache aligned with an even
* address. All other handlers are on an odd address and
* require no modification. Otherwise, MIPS32 mode will
* be entered when handling any TLB exceptions. That
* would be bad...since we must stay in microMIPS mode.
*/
if (!(handler & 0x1))
handler |= 1;
#endif
old_handler = xchg(&exception_handlers[n], handler);
if (n == 0 && cpu_has_divec) {
#ifdef CONFIG_CPU_MICROMIPS
unsigned long jump_mask = ~((1 << 27) - 1);
#else
unsigned long jump_mask = ~((1 << 28) - 1);
#endif
u32 *buf = (u32 *)(ebase + 0x200);
if ((handler & jump_mask) == ((ebase + 0x200) & jump_mask)) {
uasm_i_j(&buf, handler & ~jump_mask);
uasm_i_nop(&buf);
} else {
UASM_i_LA(&buf, GPR_K0, handler);
uasm_i_jr(&buf, GPR_K0);
uasm_i_nop(&buf);
}
local_flush_icache_range(ebase + 0x200, (unsigned long)buf);
}
return (void *)old_handler;
}
static void do_default_vi(void)
{
show_regs(get_irq_regs());
panic("Caught unexpected vectored interrupt.");
}
void *set_vi_handler(int n, vi_handler_t addr)
{
extern const u8 except_vec_vi[];
extern const u8 except_vec_vi_ori[], except_vec_vi_end[];
extern const u8 rollback_except_vec_vi[];
unsigned long handler;
unsigned long old_handler = vi_handlers[n];
int srssets = current_cpu_data.srsets;
u16 *h;
unsigned char *b;
const u8 *vec_start;
int ori_offset;
int handler_len;
BUG_ON(!cpu_has_veic && !cpu_has_vint);
if (addr == NULL) {
handler = (unsigned long) do_default_vi;
} else
handler = (unsigned long) addr;
vi_handlers[n] = handler;
b = (unsigned char *)(ebase + 0x200 + n*VECTORSPACING);
if (cpu_has_veic) {
if (board_bind_eic_interrupt)
board_bind_eic_interrupt(n, 0);
} else if (cpu_has_vint) {
/* SRSMap is only defined if shadow sets are implemented */
if (srssets > 1)
change_c0_srsmap(0xf << n*4, 0 << n*4);
}
vec_start = using_rollback_handler() ? rollback_except_vec_vi :
except_vec_vi;
#if defined(CONFIG_CPU_MICROMIPS) || defined(CONFIG_CPU_BIG_ENDIAN)
ori_offset = except_vec_vi_ori - vec_start + 2;
#else
ori_offset = except_vec_vi_ori - vec_start;
#endif
handler_len = except_vec_vi_end - vec_start;
if (handler_len > VECTORSPACING) {
/*
* Sigh... panicing won't help as the console
* is probably not configured :(
*/
panic("VECTORSPACING too small");
}
set_handler(((unsigned long)b - ebase), vec_start,
#ifdef CONFIG_CPU_MICROMIPS
(handler_len - 1));
#else
handler_len);
#endif
/* insert offset into vi_handlers[] */
h = (u16 *)(b + ori_offset);
*h = n * sizeof(handler);
local_flush_icache_range((unsigned long)b,
(unsigned long)(b+handler_len));
return (void *)old_handler;
}
/*
* Timer interrupt
*/
int cp0_compare_irq;
EXPORT_SYMBOL_GPL(cp0_compare_irq);
int cp0_compare_irq_shift;
/*
* Performance counter IRQ or -1 if shared with timer
*/
int cp0_perfcount_irq;
EXPORT_SYMBOL_GPL(cp0_perfcount_irq);
/*
* Fast debug channel IRQ or -1 if not present
*/
int cp0_fdc_irq;
EXPORT_SYMBOL_GPL(cp0_fdc_irq);
static int noulri;
static int __init ulri_disable(char *s)
{
pr_info("Disabling ulri\n");
noulri = 1;
return 1;
}
__setup("noulri", ulri_disable);
/* configure STATUS register */
static void configure_status(void)
{
/*
* Disable coprocessors and select 32-bit or 64-bit addressing
* and the 16/32 or 32/32 FPR register model. Reset the BEV
* flag that some firmware may have left set and the TS bit (for
* IP27). Set XX for ISA IV code to work.
*/
unsigned int status_set = ST0_KERNEL_CUMASK;
#ifdef CONFIG_64BIT
status_set |= ST0_FR|ST0_KX|ST0_SX|ST0_UX;
#endif
if (current_cpu_data.isa_level & MIPS_CPU_ISA_IV)
status_set |= ST0_XX;
if (cpu_has_dsp)
status_set |= ST0_MX;
change_c0_status(ST0_CU|ST0_MX|ST0_RE|ST0_FR|ST0_BEV|ST0_TS|ST0_KX|ST0_SX|ST0_UX,
status_set);
back_to_back_c0_hazard();
}
unsigned int hwrena;
EXPORT_SYMBOL_GPL(hwrena);
/* configure HWRENA register */
static void configure_hwrena(void)
{
hwrena = cpu_hwrena_impl_bits;
if (cpu_has_mips_r2_r6)
hwrena |= MIPS_HWRENA_CPUNUM |
MIPS_HWRENA_SYNCISTEP |
MIPS_HWRENA_CC |
MIPS_HWRENA_CCRES;
if (!noulri && cpu_has_userlocal)
hwrena |= MIPS_HWRENA_ULR;
if (hwrena)
write_c0_hwrena(hwrena);
}
static void configure_exception_vector(void)
{
if (cpu_has_mips_r2_r6) {
unsigned long sr = set_c0_status(ST0_BEV);
/* If available, use WG to set top bits of EBASE */
if (cpu_has_ebase_wg) {
#ifdef CONFIG_64BIT
write_c0_ebase_64(ebase | MIPS_EBASE_WG);
#else
write_c0_ebase(ebase | MIPS_EBASE_WG);
#endif
}
write_c0_ebase(ebase);
write_c0_status(sr);
}
if (cpu_has_veic || cpu_has_vint) {
/* Setting vector spacing enables EI/VI mode */
change_c0_intctl(0x3e0, VECTORSPACING);
}
if (cpu_has_divec) {
if (cpu_has_mipsmt) {
unsigned int vpflags = dvpe();
set_c0_cause(CAUSEF_IV);
evpe(vpflags);
} else
set_c0_cause(CAUSEF_IV);
}
}
void per_cpu_trap_init(bool is_boot_cpu)
{
unsigned int cpu = smp_processor_id();
configure_status();
configure_hwrena();
configure_exception_vector();
/*
* Before R2 both interrupt numbers were fixed to 7, so on R2 only:
*
* o read IntCtl.IPTI to determine the timer interrupt
* o read IntCtl.IPPCI to determine the performance counter interrupt
* o read IntCtl.IPFDC to determine the fast debug channel interrupt
*/
if (cpu_has_mips_r2_r6) {
cp0_compare_irq_shift = CAUSEB_TI - CAUSEB_IP;
cp0_compare_irq = (read_c0_intctl() >> INTCTLB_IPTI) & 7;
cp0_perfcount_irq = (read_c0_intctl() >> INTCTLB_IPPCI) & 7;
cp0_fdc_irq = (read_c0_intctl() >> INTCTLB_IPFDC) & 7;
if (!cp0_fdc_irq)
cp0_fdc_irq = -1;
} else {
cp0_compare_irq = CP0_LEGACY_COMPARE_IRQ;
cp0_compare_irq_shift = CP0_LEGACY_PERFCNT_IRQ;
cp0_perfcount_irq = -1;
cp0_fdc_irq = -1;
}
if (cpu_has_mmid)
cpu_data[cpu].asid_cache = 0;
else if (!cpu_data[cpu].asid_cache)
cpu_data[cpu].asid_cache = asid_first_version(cpu);
mmgrab(&init_mm);
current->active_mm = &init_mm;
BUG_ON(current->mm);
enter_lazy_tlb(&init_mm, current);
/* Boot CPU's cache setup in setup_arch(). */
if (!is_boot_cpu)
cpu_cache_init();
tlb_init();
TLBMISS_HANDLER_SETUP();
}
/* Install CPU exception handler */
void set_handler(unsigned long offset, const void *addr, unsigned long size)
{
#ifdef CONFIG_CPU_MICROMIPS
memcpy((void *)(ebase + offset), ((unsigned char *)addr - 1), size);
#else
memcpy((void *)(ebase + offset), addr, size);
#endif
local_flush_icache_range(ebase + offset, ebase + offset + size);
}
static const char panic_null_cerr[] =
"Trying to set NULL cache error exception handler\n";
/*
* Install uncached CPU exception handler.
* This is suitable only for the cache error exception which is the only
* exception handler that is being run uncached.
*/
void set_uncached_handler(unsigned long offset, void *addr,
unsigned long size)
{
unsigned long uncached_ebase = CKSEG1ADDR_OR_64BIT(__pa(ebase));
if (!addr)
panic(panic_null_cerr);
memcpy((void *)(uncached_ebase + offset), addr, size);
}
static int __initdata rdhwr_noopt;
static int __init set_rdhwr_noopt(char *str)
{
rdhwr_noopt = 1;
return 1;
}
__setup("rdhwr_noopt", set_rdhwr_noopt);
void __init trap_init(void)
{
extern char except_vec3_generic;
extern char except_vec4;
extern char except_vec3_r4000;
unsigned long i, vec_size;
phys_addr_t ebase_pa;
check_wait();
if (!cpu_has_mips_r2_r6) {
ebase = CAC_BASE;
vec_size = 0x400;
} else {
if (cpu_has_veic || cpu_has_vint)
vec_size = 0x200 + VECTORSPACING*64;
else
vec_size = PAGE_SIZE;
ebase_pa = memblock_phys_alloc(vec_size, 1 << fls(vec_size));
if (!ebase_pa)
panic("%s: Failed to allocate %lu bytes align=0x%x\n",
__func__, vec_size, 1 << fls(vec_size));
/*
* Try to ensure ebase resides in KSeg0 if possible.
*
* It shouldn't generally be in XKPhys on MIPS64 to avoid
* hitting a poorly defined exception base for Cache Errors.
* The allocation is likely to be in the low 512MB of physical,
* in which case we should be able to convert to KSeg0.
*
* EVA is special though as it allows segments to be rearranged
* and to become uncached during cache error handling.
*/
if (!IS_ENABLED(CONFIG_EVA) && ebase_pa < 0x20000000)
ebase = CKSEG0ADDR(ebase_pa);
else
ebase = (unsigned long)phys_to_virt(ebase_pa);
if (ebase_pa >= 0x20000000)
pr_warn("ebase(%pa) should better be in KSeg0",
&ebase_pa);
}
if (cpu_has_mmips) {
unsigned int config3 = read_c0_config3();
if (IS_ENABLED(CONFIG_CPU_MICROMIPS))
write_c0_config3(config3 | MIPS_CONF3_ISA_OE);
else
write_c0_config3(config3 & ~MIPS_CONF3_ISA_OE);
}
if (board_ebase_setup)
board_ebase_setup();
per_cpu_trap_init(true);
memblock_set_bottom_up(false);
/*
* Copy the generic exception handlers to their final destination.
* This will be overridden later as suitable for a particular
* configuration.
*/
set_handler(0x180, &except_vec3_generic, 0x80);
/*
* Setup default vectors
*/
for (i = 0; i <= 31; i++)
set_except_vector(i, handle_reserved);
/*
* Copy the EJTAG debug exception vector handler code to its final
* destination.
*/
if (cpu_has_ejtag && board_ejtag_handler_setup)
board_ejtag_handler_setup();
/*
* Only some CPUs have the watch exceptions.
*/
if (cpu_has_watch)
set_except_vector(EXCCODE_WATCH, handle_watch);
/*
* Initialise interrupt handlers
*/
if (cpu_has_veic || cpu_has_vint) {
int nvec = cpu_has_veic ? 64 : 8;
for (i = 0; i < nvec; i++)
set_vi_handler(i, NULL);
}
else if (cpu_has_divec)
set_handler(0x200, &except_vec4, 0x8);
/*
* Some CPUs can enable/disable for cache parity detection, but does
* it different ways.
*/
parity_protection_init();
/*
* The Data Bus Errors / Instruction Bus Errors are signaled
* by external hardware. Therefore these two exceptions
* may have board specific handlers.
*/
if (board_be_init)
board_be_init();
set_except_vector(EXCCODE_INT, using_rollback_handler() ?
rollback_handle_int : handle_int);
set_except_vector(EXCCODE_MOD, handle_tlbm);
set_except_vector(EXCCODE_TLBL, handle_tlbl);
set_except_vector(EXCCODE_TLBS, handle_tlbs);
set_except_vector(EXCCODE_ADEL, handle_adel);
set_except_vector(EXCCODE_ADES, handle_ades);
set_except_vector(EXCCODE_IBE, handle_ibe);
set_except_vector(EXCCODE_DBE, handle_dbe);
set_except_vector(EXCCODE_SYS, handle_sys);
set_except_vector(EXCCODE_BP, handle_bp);
if (rdhwr_noopt)
set_except_vector(EXCCODE_RI, handle_ri);
else {
if (cpu_has_vtag_icache)
set_except_vector(EXCCODE_RI, handle_ri_rdhwr_tlbp);
else if (current_cpu_type() == CPU_LOONGSON64)
set_except_vector(EXCCODE_RI, handle_ri_rdhwr_tlbp);
else
set_except_vector(EXCCODE_RI, handle_ri_rdhwr);
}
set_except_vector(EXCCODE_CPU, handle_cpu);
set_except_vector(EXCCODE_OV, handle_ov);
set_except_vector(EXCCODE_TR, handle_tr);
set_except_vector(EXCCODE_MSAFPE, handle_msa_fpe);
if (board_nmi_handler_setup)
board_nmi_handler_setup();
if (cpu_has_fpu && !cpu_has_nofpuex)
set_except_vector(EXCCODE_FPE, handle_fpe);
if (cpu_has_ftlbparex)
set_except_vector(MIPS_EXCCODE_TLBPAR, handle_ftlb);
if (cpu_has_gsexcex)
set_except_vector(LOONGSON_EXCCODE_GSEXC, handle_gsexc);
if (cpu_has_rixiex) {
set_except_vector(EXCCODE_TLBRI, tlb_do_page_fault_0);
set_except_vector(EXCCODE_TLBXI, tlb_do_page_fault_0);
}
set_except_vector(EXCCODE_MSADIS, handle_msa);
set_except_vector(EXCCODE_MDMX, handle_mdmx);
if (cpu_has_mcheck)
set_except_vector(EXCCODE_MCHECK, handle_mcheck);
if (cpu_has_mipsmt)
set_except_vector(EXCCODE_THREAD, handle_mt);
set_except_vector(EXCCODE_DSPDIS, handle_dsp);
if (board_cache_error_setup)
board_cache_error_setup();
if (cpu_has_vce)
/* Special exception: R4[04]00 uses also the divec space. */
set_handler(0x180, &except_vec3_r4000, 0x100);
else if (cpu_has_4kex)
set_handler(0x180, &except_vec3_generic, 0x80);
else
set_handler(0x080, &except_vec3_generic, 0x80);
local_flush_icache_range(ebase, ebase + vec_size);
sort_extable(__start___dbe_table, __stop___dbe_table);
cu2_notifier(default_cu2_call, 0x80000000); /* Run last */
}
static int trap_pm_notifier(struct notifier_block *self, unsigned long cmd,
void *v)
{
switch (cmd) {
case CPU_PM_ENTER_FAILED:
case CPU_PM_EXIT:
configure_status();
configure_hwrena();
configure_exception_vector();
/* Restore register with CPU number for TLB handlers */
TLBMISS_HANDLER_RESTORE();
break;
}
return NOTIFY_OK;
}
static struct notifier_block trap_pm_notifier_block = {
.notifier_call = trap_pm_notifier,
};
static int __init trap_pm_init(void)
{
return cpu_pm_register_notifier(&trap_pm_notifier_block);
}
arch_initcall(trap_pm_init);
Reference in New Issue View Git Blame Copy Permalink