linux/arch/x86/platform/pvh/head.S
Jiri Slaby ef1e03152c x86/asm: Make some functions local
There are a couple of assembly functions which are invoked only locally
in the file they are defined. In C, they are marked "static". In
assembly, annotate them using SYM_{FUNC,CODE}_START_LOCAL (and switch
their ENDPROC to SYM_{FUNC,CODE}_END too). Whether FUNC or CODE is used,
depends on whether ENDPROC or END was used for a particular function
before.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: linux-arch@vger.kernel.org
Cc: linux-efi <linux-efi@vger.kernel.org>
Cc: linux-efi@vger.kernel.org
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: platform-driver-x86@vger.kernel.org
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Cc: xen-devel@lists.xenproject.org
Link: https://lkml.kernel.org/r/20191011115108.12392-21-jslaby@suse.cz
2019-10-18 11:34:39 +02:00

178 lines
4.3 KiB
ArmAsm
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright C 2016, Oracle and/or its affiliates. All rights reserved.
*/
.code32
.text
#define _pa(x) ((x) - __START_KERNEL_map)
#include <linux/elfnote.h>
#include <linux/init.h>
#include <linux/linkage.h>
#include <asm/segment.h>
#include <asm/asm.h>
#include <asm/boot.h>
#include <asm/processor-flags.h>
#include <asm/msr.h>
#include <xen/interface/elfnote.h>
__HEAD
/*
* Entry point for PVH guests.
*
* Xen ABI specifies the following register state when we come here:
*
* - `ebx`: contains the physical memory address where the loader has placed
* the boot start info structure.
* - `cr0`: bit 0 (PE) must be set. All the other writeable bits are cleared.
* - `cr4`: all bits are cleared.
* - `cs `: must be a 32-bit read/execute code segment with a base of 0
* and a limit of 0xFFFFFFFF. The selector value is unspecified.
* - `ds`, `es`: must be a 32-bit read/write data segment with a base of
* 0 and a limit of 0xFFFFFFFF. The selector values are all
* unspecified.
* - `tr`: must be a 32-bit TSS (active) with a base of '0' and a limit
* of '0x67'.
* - `eflags`: bit 17 (VM) must be cleared. Bit 9 (IF) must be cleared.
* Bit 8 (TF) must be cleared. Other bits are all unspecified.
*
* All other processor registers and flag bits are unspecified. The OS is in
* charge of setting up it's own stack, GDT and IDT.
*/
#define PVH_GDT_ENTRY_CS 1
#define PVH_GDT_ENTRY_DS 2
#define PVH_GDT_ENTRY_CANARY 3
#define PVH_CS_SEL (PVH_GDT_ENTRY_CS * 8)
#define PVH_DS_SEL (PVH_GDT_ENTRY_DS * 8)
#define PVH_CANARY_SEL (PVH_GDT_ENTRY_CANARY * 8)
SYM_CODE_START_LOCAL(pvh_start_xen)
cld
lgdt (_pa(gdt))
mov $PVH_DS_SEL,%eax
mov %eax,%ds
mov %eax,%es
mov %eax,%ss
/* Stash hvm_start_info. */
mov $_pa(pvh_start_info), %edi
mov %ebx, %esi
mov _pa(pvh_start_info_sz), %ecx
shr $2,%ecx
rep
movsl
mov $_pa(early_stack_end), %esp
/* Enable PAE mode. */
mov %cr4, %eax
orl $X86_CR4_PAE, %eax
mov %eax, %cr4
#ifdef CONFIG_X86_64
/* Enable Long mode. */
mov $MSR_EFER, %ecx
rdmsr
btsl $_EFER_LME, %eax
wrmsr
/* Enable pre-constructed page tables. */
mov $_pa(init_top_pgt), %eax
mov %eax, %cr3
mov $(X86_CR0_PG | X86_CR0_PE), %eax
mov %eax, %cr0
/* Jump to 64-bit mode. */
ljmp $PVH_CS_SEL, $_pa(1f)
/* 64-bit entry point. */
.code64
1:
/* Set base address in stack canary descriptor. */
mov $MSR_GS_BASE,%ecx
mov $_pa(canary), %eax
xor %edx, %edx
wrmsr
call xen_prepare_pvh
/* startup_64 expects boot_params in %rsi. */
mov $_pa(pvh_bootparams), %rsi
mov $_pa(startup_64), %rax
jmp *%rax
#else /* CONFIG_X86_64 */
/* Set base address in stack canary descriptor. */
movl $_pa(gdt_start),%eax
movl $_pa(canary),%ecx
movw %cx, (PVH_GDT_ENTRY_CANARY * 8) + 2(%eax)
shrl $16, %ecx
movb %cl, (PVH_GDT_ENTRY_CANARY * 8) + 4(%eax)
movb %ch, (PVH_GDT_ENTRY_CANARY * 8) + 7(%eax)
mov $PVH_CANARY_SEL,%eax
mov %eax,%gs
call mk_early_pgtbl_32
mov $_pa(initial_page_table), %eax
mov %eax, %cr3
mov %cr0, %eax
or $(X86_CR0_PG | X86_CR0_PE), %eax
mov %eax, %cr0
ljmp $PVH_CS_SEL, $1f
1:
call xen_prepare_pvh
mov $_pa(pvh_bootparams), %esi
/* startup_32 doesn't expect paging and PAE to be on. */
ljmp $PVH_CS_SEL, $_pa(2f)
2:
mov %cr0, %eax
and $~X86_CR0_PG, %eax
mov %eax, %cr0
mov %cr4, %eax
and $~X86_CR4_PAE, %eax
mov %eax, %cr4
ljmp $PVH_CS_SEL, $_pa(startup_32)
#endif
SYM_CODE_END(pvh_start_xen)
.section ".init.data","aw"
.balign 8
SYM_DATA_START_LOCAL(gdt)
.word gdt_end - gdt_start
.long _pa(gdt_start)
.word 0
SYM_DATA_END(gdt)
SYM_DATA_START_LOCAL(gdt_start)
.quad 0x0000000000000000 /* NULL descriptor */
#ifdef CONFIG_X86_64
.quad GDT_ENTRY(0xa09a, 0, 0xfffff) /* PVH_CS_SEL */
#else
.quad GDT_ENTRY(0xc09a, 0, 0xfffff) /* PVH_CS_SEL */
#endif
.quad GDT_ENTRY(0xc092, 0, 0xfffff) /* PVH_DS_SEL */
.quad GDT_ENTRY(0x4090, 0, 0x18) /* PVH_CANARY_SEL */
SYM_DATA_END_LABEL(gdt_start, SYM_L_LOCAL, gdt_end)
.balign 16
SYM_DATA_LOCAL(canary, .fill 48, 1, 0)
SYM_DATA_START_LOCAL(early_stack)
.fill BOOT_STACK_SIZE, 1, 0
SYM_DATA_END_LABEL(early_stack, SYM_L_LOCAL, early_stack_end)
ELFNOTE(Xen, XEN_ELFNOTE_PHYS32_ENTRY,
_ASM_PTR (pvh_start_xen - __START_KERNEL_map))