mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-15 06:55:13 +08:00
5a9fbf8b80
The status bit in the status and control register can tell us whether the last reboot was caused by the watchdog. Make sure to take that into the bootstatus before clearing it. Signed-off-by: Henning Schild <henning.schild@siemens.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220824152448.7736-1-henning.schild@siemens.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
550 lines
12 KiB
C
550 lines
12 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* w83627hf/thf WDT driver
|
|
*
|
|
* (c) Copyright 2013 Guenter Roeck
|
|
* converted to watchdog infrastructure
|
|
*
|
|
* (c) Copyright 2007 Vlad Drukker <vlad@storewiz.com>
|
|
* added support for W83627THF.
|
|
*
|
|
* (c) Copyright 2003,2007 Pádraig Brady <P@draigBrady.com>
|
|
*
|
|
* Based on advantechwdt.c which is based on wdt.c.
|
|
* Original copyright messages:
|
|
*
|
|
* (c) Copyright 2000-2001 Marek Michalkiewicz <marekm@linux.org.pl>
|
|
*
|
|
* (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>,
|
|
* All Rights Reserved.
|
|
*
|
|
* Neither Alan Cox nor CymruNet Ltd. admit liability nor provide
|
|
* warranty for any of this software. This material is provided
|
|
* "AS-IS" and at no charge.
|
|
*
|
|
* (c) Copyright 1995 Alan Cox <alan@lxorguk.ukuu.org.uk>
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/types.h>
|
|
#include <linux/watchdog.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <linux/dmi.h>
|
|
|
|
#define WATCHDOG_NAME "w83627hf/thf/hg/dhg WDT"
|
|
#define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */
|
|
|
|
static int wdt_io;
|
|
static int cr_wdt_timeout; /* WDT timeout register */
|
|
static int cr_wdt_control; /* WDT control register */
|
|
static int cr_wdt_csr; /* WDT control & status register */
|
|
static int wdt_cfg_enter = 0x87;/* key to unlock configuration space */
|
|
static int wdt_cfg_leave = 0xAA;/* key to lock configuration space */
|
|
|
|
enum chips { w83627hf, w83627s, w83697hf, w83697ug, w83637hf, w83627thf,
|
|
w83687thf, w83627ehf, w83627dhg, w83627uhg, w83667hg, w83627dhg_p,
|
|
w83667hg_b, nct6775, nct6776, nct6779, nct6791, nct6792, nct6793,
|
|
nct6795, nct6796, nct6102, nct6116 };
|
|
|
|
static int timeout; /* in seconds */
|
|
module_param(timeout, int, 0);
|
|
MODULE_PARM_DESC(timeout,
|
|
"Watchdog timeout in seconds. 1 <= timeout <= 255, default="
|
|
__MODULE_STRING(WATCHDOG_TIMEOUT) ".");
|
|
|
|
static bool nowayout = WATCHDOG_NOWAYOUT;
|
|
module_param(nowayout, bool, 0);
|
|
MODULE_PARM_DESC(nowayout,
|
|
"Watchdog cannot be stopped once started (default="
|
|
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
|
|
|
|
static int early_disable;
|
|
module_param(early_disable, int, 0);
|
|
MODULE_PARM_DESC(early_disable, "Disable watchdog at boot time (default=0)");
|
|
|
|
/*
|
|
* Kernel methods.
|
|
*/
|
|
|
|
#define WDT_EFER (wdt_io+0) /* Extended Function Enable Registers */
|
|
#define WDT_EFIR (wdt_io+0) /* Extended Function Index Register
|
|
(same as EFER) */
|
|
#define WDT_EFDR (WDT_EFIR+1) /* Extended Function Data Register */
|
|
|
|
#define W83627HF_LD_WDT 0x08
|
|
|
|
#define W83627HF_ID 0x52
|
|
#define W83627S_ID 0x59
|
|
#define W83697HF_ID 0x60
|
|
#define W83697UG_ID 0x68
|
|
#define W83637HF_ID 0x70
|
|
#define W83627THF_ID 0x82
|
|
#define W83687THF_ID 0x85
|
|
#define W83627EHF_ID 0x88
|
|
#define W83627DHG_ID 0xa0
|
|
#define W83627UHG_ID 0xa2
|
|
#define W83667HG_ID 0xa5
|
|
#define W83627DHG_P_ID 0xb0
|
|
#define W83667HG_B_ID 0xb3
|
|
#define NCT6775_ID 0xb4
|
|
#define NCT6776_ID 0xc3
|
|
#define NCT6102_ID 0xc4
|
|
#define NCT6116_ID 0xd2
|
|
#define NCT6779_ID 0xc5
|
|
#define NCT6791_ID 0xc8
|
|
#define NCT6792_ID 0xc9
|
|
#define NCT6793_ID 0xd1
|
|
#define NCT6795_ID 0xd3
|
|
#define NCT6796_ID 0xd4 /* also NCT9697D, NCT9698D */
|
|
|
|
#define W83627HF_WDT_TIMEOUT 0xf6
|
|
#define W83697HF_WDT_TIMEOUT 0xf4
|
|
#define NCT6102D_WDT_TIMEOUT 0xf1
|
|
|
|
#define W83627HF_WDT_CONTROL 0xf5
|
|
#define W83697HF_WDT_CONTROL 0xf3
|
|
#define NCT6102D_WDT_CONTROL 0xf0
|
|
|
|
#define W836X7HF_WDT_CSR 0xf7
|
|
#define NCT6102D_WDT_CSR 0xf2
|
|
|
|
#define WDT_CSR_STATUS 0x10
|
|
#define WDT_CSR_KBD 0x40
|
|
#define WDT_CSR_MOUSE 0x80
|
|
|
|
static void superio_outb(int reg, int val)
|
|
{
|
|
outb(reg, WDT_EFER);
|
|
outb(val, WDT_EFDR);
|
|
}
|
|
|
|
static inline int superio_inb(int reg)
|
|
{
|
|
outb(reg, WDT_EFER);
|
|
return inb(WDT_EFDR);
|
|
}
|
|
|
|
static int superio_enter(void)
|
|
{
|
|
if (!request_muxed_region(wdt_io, 2, WATCHDOG_NAME))
|
|
return -EBUSY;
|
|
|
|
outb_p(wdt_cfg_enter, WDT_EFER); /* Enter extended function mode */
|
|
outb_p(wdt_cfg_enter, WDT_EFER); /* Again according to manual */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void superio_select(int ld)
|
|
{
|
|
superio_outb(0x07, ld);
|
|
}
|
|
|
|
static void superio_exit(void)
|
|
{
|
|
outb_p(wdt_cfg_leave, WDT_EFER); /* Leave extended function mode */
|
|
release_region(wdt_io, 2);
|
|
}
|
|
|
|
static int w83627hf_init(struct watchdog_device *wdog, enum chips chip)
|
|
{
|
|
int ret;
|
|
unsigned char t;
|
|
|
|
ret = superio_enter();
|
|
if (ret)
|
|
return ret;
|
|
|
|
superio_select(W83627HF_LD_WDT);
|
|
|
|
/* set CR30 bit 0 to activate GPIO2 */
|
|
t = superio_inb(0x30);
|
|
if (!(t & 0x01))
|
|
superio_outb(0x30, t | 0x01);
|
|
|
|
switch (chip) {
|
|
case w83627hf:
|
|
case w83627s:
|
|
t = superio_inb(0x2B) & ~0x10;
|
|
superio_outb(0x2B, t); /* set GPIO24 to WDT0 */
|
|
break;
|
|
case w83697hf:
|
|
/* Set pin 119 to WDTO# mode (= CR29, WDT0) */
|
|
t = superio_inb(0x29) & ~0x60;
|
|
t |= 0x20;
|
|
superio_outb(0x29, t);
|
|
break;
|
|
case w83697ug:
|
|
/* Set pin 118 to WDTO# mode */
|
|
t = superio_inb(0x2b) & ~0x04;
|
|
superio_outb(0x2b, t);
|
|
break;
|
|
case w83627thf:
|
|
t = (superio_inb(0x2B) & ~0x08) | 0x04;
|
|
superio_outb(0x2B, t); /* set GPIO3 to WDT0 */
|
|
break;
|
|
case w83627dhg:
|
|
case w83627dhg_p:
|
|
t = superio_inb(0x2D) & ~0x01; /* PIN77 -> WDT0# */
|
|
superio_outb(0x2D, t); /* set GPIO5 to WDT0 */
|
|
t = superio_inb(cr_wdt_control);
|
|
t |= 0x02; /* enable the WDTO# output low pulse
|
|
* to the KBRST# pin */
|
|
superio_outb(cr_wdt_control, t);
|
|
break;
|
|
case w83637hf:
|
|
break;
|
|
case w83687thf:
|
|
t = superio_inb(0x2C) & ~0x80; /* PIN47 -> WDT0# */
|
|
superio_outb(0x2C, t);
|
|
break;
|
|
case w83627ehf:
|
|
case w83627uhg:
|
|
case w83667hg:
|
|
case w83667hg_b:
|
|
case nct6775:
|
|
case nct6776:
|
|
case nct6779:
|
|
case nct6791:
|
|
case nct6792:
|
|
case nct6793:
|
|
case nct6795:
|
|
case nct6796:
|
|
case nct6102:
|
|
case nct6116:
|
|
/*
|
|
* These chips have a fixed WDTO# output pin (W83627UHG),
|
|
* or support more than one WDTO# output pin.
|
|
* Don't touch its configuration, and hope the BIOS
|
|
* does the right thing.
|
|
*/
|
|
t = superio_inb(cr_wdt_control);
|
|
t |= 0x02; /* enable the WDTO# output low pulse
|
|
* to the KBRST# pin */
|
|
superio_outb(cr_wdt_control, t);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
t = superio_inb(cr_wdt_timeout);
|
|
if (t != 0) {
|
|
if (early_disable) {
|
|
pr_warn("Stopping previously enabled watchdog until userland kicks in\n");
|
|
superio_outb(cr_wdt_timeout, 0);
|
|
} else {
|
|
pr_info("Watchdog already running. Resetting timeout to %d sec\n",
|
|
wdog->timeout);
|
|
superio_outb(cr_wdt_timeout, wdog->timeout);
|
|
}
|
|
}
|
|
|
|
/* set second mode & disable keyboard turning off watchdog */
|
|
t = superio_inb(cr_wdt_control) & ~0x0C;
|
|
superio_outb(cr_wdt_control, t);
|
|
|
|
t = superio_inb(cr_wdt_csr);
|
|
if (t & WDT_CSR_STATUS)
|
|
wdog->bootstatus |= WDIOF_CARDRESET;
|
|
|
|
/* reset status, disable keyboard & mouse turning off watchdog */
|
|
t &= ~(WDT_CSR_STATUS | WDT_CSR_KBD | WDT_CSR_MOUSE);
|
|
superio_outb(cr_wdt_csr, t);
|
|
|
|
superio_exit();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wdt_set_time(unsigned int timeout)
|
|
{
|
|
int ret;
|
|
|
|
ret = superio_enter();
|
|
if (ret)
|
|
return ret;
|
|
|
|
superio_select(W83627HF_LD_WDT);
|
|
superio_outb(cr_wdt_timeout, timeout);
|
|
superio_exit();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wdt_start(struct watchdog_device *wdog)
|
|
{
|
|
return wdt_set_time(wdog->timeout);
|
|
}
|
|
|
|
static int wdt_stop(struct watchdog_device *wdog)
|
|
{
|
|
return wdt_set_time(0);
|
|
}
|
|
|
|
static int wdt_set_timeout(struct watchdog_device *wdog, unsigned int timeout)
|
|
{
|
|
wdog->timeout = timeout;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int wdt_get_time(struct watchdog_device *wdog)
|
|
{
|
|
unsigned int timeleft;
|
|
int ret;
|
|
|
|
ret = superio_enter();
|
|
if (ret)
|
|
return 0;
|
|
|
|
superio_select(W83627HF_LD_WDT);
|
|
timeleft = superio_inb(cr_wdt_timeout);
|
|
superio_exit();
|
|
|
|
return timeleft;
|
|
}
|
|
|
|
/*
|
|
* Kernel Interfaces
|
|
*/
|
|
|
|
static const struct watchdog_info wdt_info = {
|
|
.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
|
|
.identity = "W83627HF Watchdog",
|
|
};
|
|
|
|
static const struct watchdog_ops wdt_ops = {
|
|
.owner = THIS_MODULE,
|
|
.start = wdt_start,
|
|
.stop = wdt_stop,
|
|
.set_timeout = wdt_set_timeout,
|
|
.get_timeleft = wdt_get_time,
|
|
};
|
|
|
|
static struct watchdog_device wdt_dev = {
|
|
.info = &wdt_info,
|
|
.ops = &wdt_ops,
|
|
.timeout = WATCHDOG_TIMEOUT,
|
|
.min_timeout = 1,
|
|
.max_timeout = 255,
|
|
};
|
|
|
|
/*
|
|
* The WDT needs to learn about soft shutdowns in order to
|
|
* turn the timebomb registers off.
|
|
*/
|
|
|
|
static int wdt_find(int addr)
|
|
{
|
|
u8 val;
|
|
int ret;
|
|
|
|
cr_wdt_timeout = W83627HF_WDT_TIMEOUT;
|
|
cr_wdt_control = W83627HF_WDT_CONTROL;
|
|
cr_wdt_csr = W836X7HF_WDT_CSR;
|
|
|
|
ret = superio_enter();
|
|
if (ret)
|
|
return ret;
|
|
superio_select(W83627HF_LD_WDT);
|
|
val = superio_inb(0x20);
|
|
switch (val) {
|
|
case W83627HF_ID:
|
|
ret = w83627hf;
|
|
break;
|
|
case W83627S_ID:
|
|
ret = w83627s;
|
|
break;
|
|
case W83697HF_ID:
|
|
ret = w83697hf;
|
|
cr_wdt_timeout = W83697HF_WDT_TIMEOUT;
|
|
cr_wdt_control = W83697HF_WDT_CONTROL;
|
|
break;
|
|
case W83697UG_ID:
|
|
ret = w83697ug;
|
|
cr_wdt_timeout = W83697HF_WDT_TIMEOUT;
|
|
cr_wdt_control = W83697HF_WDT_CONTROL;
|
|
break;
|
|
case W83637HF_ID:
|
|
ret = w83637hf;
|
|
break;
|
|
case W83627THF_ID:
|
|
ret = w83627thf;
|
|
break;
|
|
case W83687THF_ID:
|
|
ret = w83687thf;
|
|
break;
|
|
case W83627EHF_ID:
|
|
ret = w83627ehf;
|
|
break;
|
|
case W83627DHG_ID:
|
|
ret = w83627dhg;
|
|
break;
|
|
case W83627DHG_P_ID:
|
|
ret = w83627dhg_p;
|
|
break;
|
|
case W83627UHG_ID:
|
|
ret = w83627uhg;
|
|
break;
|
|
case W83667HG_ID:
|
|
ret = w83667hg;
|
|
break;
|
|
case W83667HG_B_ID:
|
|
ret = w83667hg_b;
|
|
break;
|
|
case NCT6775_ID:
|
|
ret = nct6775;
|
|
break;
|
|
case NCT6776_ID:
|
|
ret = nct6776;
|
|
break;
|
|
case NCT6779_ID:
|
|
ret = nct6779;
|
|
break;
|
|
case NCT6791_ID:
|
|
ret = nct6791;
|
|
break;
|
|
case NCT6792_ID:
|
|
ret = nct6792;
|
|
break;
|
|
case NCT6793_ID:
|
|
ret = nct6793;
|
|
break;
|
|
case NCT6795_ID:
|
|
ret = nct6795;
|
|
break;
|
|
case NCT6796_ID:
|
|
ret = nct6796;
|
|
break;
|
|
case NCT6102_ID:
|
|
ret = nct6102;
|
|
cr_wdt_timeout = NCT6102D_WDT_TIMEOUT;
|
|
cr_wdt_control = NCT6102D_WDT_CONTROL;
|
|
cr_wdt_csr = NCT6102D_WDT_CSR;
|
|
break;
|
|
case NCT6116_ID:
|
|
ret = nct6116;
|
|
cr_wdt_timeout = NCT6102D_WDT_TIMEOUT;
|
|
cr_wdt_control = NCT6102D_WDT_CONTROL;
|
|
cr_wdt_csr = NCT6102D_WDT_CSR;
|
|
break;
|
|
case 0xff:
|
|
ret = -ENODEV;
|
|
break;
|
|
default:
|
|
ret = -ENODEV;
|
|
pr_err("Unsupported chip ID: 0x%02x\n", val);
|
|
break;
|
|
}
|
|
superio_exit();
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* On some systems, the NCT6791D comes with a companion chip and the
|
|
* watchdog function is in this companion chip. We must use a different
|
|
* unlocking sequence to access the companion chip.
|
|
*/
|
|
static int __init wdt_use_alt_key(const struct dmi_system_id *d)
|
|
{
|
|
wdt_cfg_enter = 0x88;
|
|
wdt_cfg_leave = 0xBB;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dmi_system_id wdt_dmi_table[] __initconst = {
|
|
{
|
|
.matches = {
|
|
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "INVES"),
|
|
DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "CTS"),
|
|
DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "INVES"),
|
|
DMI_EXACT_MATCH(DMI_BOARD_NAME, "SHARKBAY"),
|
|
},
|
|
.callback = wdt_use_alt_key,
|
|
},
|
|
{}
|
|
};
|
|
|
|
static int __init wdt_init(void)
|
|
{
|
|
int ret;
|
|
int chip;
|
|
static const char * const chip_name[] = {
|
|
"W83627HF",
|
|
"W83627S",
|
|
"W83697HF",
|
|
"W83697UG",
|
|
"W83637HF",
|
|
"W83627THF",
|
|
"W83687THF",
|
|
"W83627EHF",
|
|
"W83627DHG",
|
|
"W83627UHG",
|
|
"W83667HG",
|
|
"W83667DHG-P",
|
|
"W83667HG-B",
|
|
"NCT6775",
|
|
"NCT6776",
|
|
"NCT6779",
|
|
"NCT6791",
|
|
"NCT6792",
|
|
"NCT6793",
|
|
"NCT6795",
|
|
"NCT6796",
|
|
"NCT6102",
|
|
"NCT6116",
|
|
};
|
|
|
|
/* Apply system-specific quirks */
|
|
dmi_check_system(wdt_dmi_table);
|
|
|
|
wdt_io = 0x2e;
|
|
chip = wdt_find(0x2e);
|
|
if (chip < 0) {
|
|
wdt_io = 0x4e;
|
|
chip = wdt_find(0x4e);
|
|
if (chip < 0)
|
|
return chip;
|
|
}
|
|
|
|
pr_info("WDT driver for %s Super I/O chip initialising\n",
|
|
chip_name[chip]);
|
|
|
|
watchdog_init_timeout(&wdt_dev, timeout, NULL);
|
|
watchdog_set_nowayout(&wdt_dev, nowayout);
|
|
watchdog_stop_on_reboot(&wdt_dev);
|
|
|
|
ret = w83627hf_init(&wdt_dev, chip);
|
|
if (ret) {
|
|
pr_err("failed to initialize watchdog (err=%d)\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = watchdog_register_device(&wdt_dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
pr_info("initialized. timeout=%d sec (nowayout=%d)\n",
|
|
wdt_dev.timeout, nowayout);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void __exit wdt_exit(void)
|
|
{
|
|
watchdog_unregister_device(&wdt_dev);
|
|
}
|
|
|
|
module_init(wdt_init);
|
|
module_exit(wdt_exit);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Pádraig Brady <P@draigBrady.com>");
|
|
MODULE_DESCRIPTION("w83627hf/thf WDT driver");
|