mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-15 06:55:13 +08:00
0edb259c98
Add reboot handler for Oxford OX820 chips as reboot currenly hangs on those boards. Code is based on ox820_assert_system_reset() found in https://github.com/kref/linux-oxnas.git in arch/arm/mach-oxnas/mach-ox820.c line 181. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
234 lines
8.4 KiB
C
234 lines
8.4 KiB
C
// SPDX-License-Identifier: (GPL-2.0)
|
|
/*
|
|
* oxnas SoC reset driver
|
|
* based on:
|
|
* Microsemi MIPS SoC reset driver
|
|
* and ox820_assert_system_reset() written by Ma Hajun <mahaijuns@gmail.com>
|
|
*
|
|
* Copyright (c) 2013 Ma Hajun <mahaijuns@gmail.com>
|
|
* Copyright (c) 2017 Microsemi Corporation
|
|
* Copyright (c) 2020 Daniel Golle <daniel@makrotopia.org>
|
|
*/
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <linux/notifier.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/reboot.h>
|
|
#include <linux/regmap.h>
|
|
|
|
/* bit numbers of reset control register */
|
|
#define OX820_SYS_CTRL_RST_SCU 0
|
|
#define OX820_SYS_CTRL_RST_COPRO 1
|
|
#define OX820_SYS_CTRL_RST_ARM0 2
|
|
#define OX820_SYS_CTRL_RST_ARM1 3
|
|
#define OX820_SYS_CTRL_RST_USBHS 4
|
|
#define OX820_SYS_CTRL_RST_USBHSPHYA 5
|
|
#define OX820_SYS_CTRL_RST_MACA 6
|
|
#define OX820_SYS_CTRL_RST_MAC OX820_SYS_CTRL_RST_MACA
|
|
#define OX820_SYS_CTRL_RST_PCIEA 7
|
|
#define OX820_SYS_CTRL_RST_SGDMA 8
|
|
#define OX820_SYS_CTRL_RST_CIPHER 9
|
|
#define OX820_SYS_CTRL_RST_DDR 10
|
|
#define OX820_SYS_CTRL_RST_SATA 11
|
|
#define OX820_SYS_CTRL_RST_SATA_LINK 12
|
|
#define OX820_SYS_CTRL_RST_SATA_PHY 13
|
|
#define OX820_SYS_CTRL_RST_PCIEPHY 14
|
|
#define OX820_SYS_CTRL_RST_STATIC 15
|
|
#define OX820_SYS_CTRL_RST_GPIO 16
|
|
#define OX820_SYS_CTRL_RST_UART1 17
|
|
#define OX820_SYS_CTRL_RST_UART2 18
|
|
#define OX820_SYS_CTRL_RST_MISC 19
|
|
#define OX820_SYS_CTRL_RST_I2S 20
|
|
#define OX820_SYS_CTRL_RST_SD 21
|
|
#define OX820_SYS_CTRL_RST_MACB 22
|
|
#define OX820_SYS_CTRL_RST_PCIEB 23
|
|
#define OX820_SYS_CTRL_RST_VIDEO 24
|
|
#define OX820_SYS_CTRL_RST_DDR_PHY 25
|
|
#define OX820_SYS_CTRL_RST_USBHSPHYB 26
|
|
#define OX820_SYS_CTRL_RST_USBDEV 27
|
|
#define OX820_SYS_CTRL_RST_ARMDBG 29
|
|
#define OX820_SYS_CTRL_RST_PLLA 30
|
|
#define OX820_SYS_CTRL_RST_PLLB 31
|
|
|
|
/* bit numbers of clock control register */
|
|
#define OX820_SYS_CTRL_CLK_COPRO 0
|
|
#define OX820_SYS_CTRL_CLK_DMA 1
|
|
#define OX820_SYS_CTRL_CLK_CIPHER 2
|
|
#define OX820_SYS_CTRL_CLK_SD 3
|
|
#define OX820_SYS_CTRL_CLK_SATA 4
|
|
#define OX820_SYS_CTRL_CLK_I2S 5
|
|
#define OX820_SYS_CTRL_CLK_USBHS 6
|
|
#define OX820_SYS_CTRL_CLK_MACA 7
|
|
#define OX820_SYS_CTRL_CLK_MAC OX820_SYS_CTRL_CLK_MACA
|
|
#define OX820_SYS_CTRL_CLK_PCIEA 8
|
|
#define OX820_SYS_CTRL_CLK_STATIC 9
|
|
#define OX820_SYS_CTRL_CLK_MACB 10
|
|
#define OX820_SYS_CTRL_CLK_PCIEB 11
|
|
#define OX820_SYS_CTRL_CLK_REF600 12
|
|
#define OX820_SYS_CTRL_CLK_USBDEV 13
|
|
#define OX820_SYS_CTRL_CLK_DDR 14
|
|
#define OX820_SYS_CTRL_CLK_DDRPHY 15
|
|
#define OX820_SYS_CTRL_CLK_DDRCK 16
|
|
|
|
/* Regmap offsets */
|
|
#define OX820_CLK_SET_REGOFFSET 0x2c
|
|
#define OX820_CLK_CLR_REGOFFSET 0x30
|
|
#define OX820_RST_SET_REGOFFSET 0x34
|
|
#define OX820_RST_CLR_REGOFFSET 0x38
|
|
#define OX820_SECONDARY_SEL_REGOFFSET 0x14
|
|
#define OX820_TERTIARY_SEL_REGOFFSET 0x8c
|
|
#define OX820_QUATERNARY_SEL_REGOFFSET 0x94
|
|
#define OX820_DEBUG_SEL_REGOFFSET 0x9c
|
|
#define OX820_ALTERNATIVE_SEL_REGOFFSET 0xa4
|
|
#define OX820_PULLUP_SEL_REGOFFSET 0xac
|
|
#define OX820_SEC_SECONDARY_SEL_REGOFFSET 0x100014
|
|
#define OX820_SEC_TERTIARY_SEL_REGOFFSET 0x10008c
|
|
#define OX820_SEC_QUATERNARY_SEL_REGOFFSET 0x100094
|
|
#define OX820_SEC_DEBUG_SEL_REGOFFSET 0x10009c
|
|
#define OX820_SEC_ALTERNATIVE_SEL_REGOFFSET 0x1000a4
|
|
#define OX820_SEC_PULLUP_SEL_REGOFFSET 0x1000ac
|
|
|
|
struct oxnas_restart_context {
|
|
struct regmap *sys_ctrl;
|
|
struct notifier_block restart_handler;
|
|
};
|
|
|
|
static int ox820_restart_handle(struct notifier_block *this,
|
|
unsigned long mode, void *cmd)
|
|
{
|
|
struct oxnas_restart_context *ctx = container_of(this, struct
|
|
oxnas_restart_context,
|
|
restart_handler);
|
|
u32 value;
|
|
|
|
/*
|
|
* Assert reset to cores as per power on defaults
|
|
* Don't touch the DDR interface as things will come to an impromptu
|
|
* stop NB Possibly should be asserting reset for PLLB, but there are
|
|
* timing concerns here according to the docs
|
|
*/
|
|
value = BIT(OX820_SYS_CTRL_RST_COPRO) |
|
|
BIT(OX820_SYS_CTRL_RST_USBHS) |
|
|
BIT(OX820_SYS_CTRL_RST_USBHSPHYA) |
|
|
BIT(OX820_SYS_CTRL_RST_MACA) |
|
|
BIT(OX820_SYS_CTRL_RST_PCIEA) |
|
|
BIT(OX820_SYS_CTRL_RST_SGDMA) |
|
|
BIT(OX820_SYS_CTRL_RST_CIPHER) |
|
|
BIT(OX820_SYS_CTRL_RST_SATA) |
|
|
BIT(OX820_SYS_CTRL_RST_SATA_LINK) |
|
|
BIT(OX820_SYS_CTRL_RST_SATA_PHY) |
|
|
BIT(OX820_SYS_CTRL_RST_PCIEPHY) |
|
|
BIT(OX820_SYS_CTRL_RST_STATIC) |
|
|
BIT(OX820_SYS_CTRL_RST_UART1) |
|
|
BIT(OX820_SYS_CTRL_RST_UART2) |
|
|
BIT(OX820_SYS_CTRL_RST_MISC) |
|
|
BIT(OX820_SYS_CTRL_RST_I2S) |
|
|
BIT(OX820_SYS_CTRL_RST_SD) |
|
|
BIT(OX820_SYS_CTRL_RST_MACB) |
|
|
BIT(OX820_SYS_CTRL_RST_PCIEB) |
|
|
BIT(OX820_SYS_CTRL_RST_VIDEO) |
|
|
BIT(OX820_SYS_CTRL_RST_USBHSPHYB) |
|
|
BIT(OX820_SYS_CTRL_RST_USBDEV);
|
|
|
|
regmap_write(ctx->sys_ctrl, OX820_RST_SET_REGOFFSET, value);
|
|
|
|
/* Release reset to cores as per power on defaults */
|
|
regmap_write(ctx->sys_ctrl, OX820_RST_CLR_REGOFFSET,
|
|
BIT(OX820_SYS_CTRL_RST_GPIO));
|
|
|
|
/*
|
|
* Disable clocks to cores as per power-on defaults - must leave DDR
|
|
* related clocks enabled otherwise we'll stop rather abruptly.
|
|
*/
|
|
value = BIT(OX820_SYS_CTRL_CLK_COPRO) |
|
|
BIT(OX820_SYS_CTRL_CLK_DMA) |
|
|
BIT(OX820_SYS_CTRL_CLK_CIPHER) |
|
|
BIT(OX820_SYS_CTRL_CLK_SD) |
|
|
BIT(OX820_SYS_CTRL_CLK_SATA) |
|
|
BIT(OX820_SYS_CTRL_CLK_I2S) |
|
|
BIT(OX820_SYS_CTRL_CLK_USBHS) |
|
|
BIT(OX820_SYS_CTRL_CLK_MAC) |
|
|
BIT(OX820_SYS_CTRL_CLK_PCIEA) |
|
|
BIT(OX820_SYS_CTRL_CLK_STATIC) |
|
|
BIT(OX820_SYS_CTRL_CLK_MACB) |
|
|
BIT(OX820_SYS_CTRL_CLK_PCIEB) |
|
|
BIT(OX820_SYS_CTRL_CLK_REF600) |
|
|
BIT(OX820_SYS_CTRL_CLK_USBDEV);
|
|
|
|
regmap_write(ctx->sys_ctrl, OX820_CLK_CLR_REGOFFSET, value);
|
|
|
|
/* Enable clocks to cores as per power-on defaults */
|
|
|
|
/* Set sys-control pin mux'ing as per power-on defaults */
|
|
regmap_write(ctx->sys_ctrl, OX820_SECONDARY_SEL_REGOFFSET, 0);
|
|
regmap_write(ctx->sys_ctrl, OX820_TERTIARY_SEL_REGOFFSET, 0);
|
|
regmap_write(ctx->sys_ctrl, OX820_QUATERNARY_SEL_REGOFFSET, 0);
|
|
regmap_write(ctx->sys_ctrl, OX820_DEBUG_SEL_REGOFFSET, 0);
|
|
regmap_write(ctx->sys_ctrl, OX820_ALTERNATIVE_SEL_REGOFFSET, 0);
|
|
regmap_write(ctx->sys_ctrl, OX820_PULLUP_SEL_REGOFFSET, 0);
|
|
|
|
regmap_write(ctx->sys_ctrl, OX820_SEC_SECONDARY_SEL_REGOFFSET, 0);
|
|
regmap_write(ctx->sys_ctrl, OX820_SEC_TERTIARY_SEL_REGOFFSET, 0);
|
|
regmap_write(ctx->sys_ctrl, OX820_SEC_QUATERNARY_SEL_REGOFFSET, 0);
|
|
regmap_write(ctx->sys_ctrl, OX820_SEC_DEBUG_SEL_REGOFFSET, 0);
|
|
regmap_write(ctx->sys_ctrl, OX820_SEC_ALTERNATIVE_SEL_REGOFFSET, 0);
|
|
regmap_write(ctx->sys_ctrl, OX820_SEC_PULLUP_SEL_REGOFFSET, 0);
|
|
|
|
/*
|
|
* No need to save any state, as the ROM loader can determine whether
|
|
* reset is due to power cycling or programatic action, just hit the
|
|
* (self-clearing) CPU reset bit of the block reset register
|
|
*/
|
|
value =
|
|
BIT(OX820_SYS_CTRL_RST_SCU) |
|
|
BIT(OX820_SYS_CTRL_RST_ARM0) |
|
|
BIT(OX820_SYS_CTRL_RST_ARM1);
|
|
|
|
regmap_write(ctx->sys_ctrl, OX820_RST_SET_REGOFFSET, value);
|
|
|
|
pr_emerg("Unable to restart system\n");
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
static int ox820_restart_probe(struct platform_device *pdev)
|
|
{
|
|
struct oxnas_restart_context *ctx;
|
|
struct regmap *sys_ctrl;
|
|
struct device *dev = &pdev->dev;
|
|
int err = 0;
|
|
|
|
sys_ctrl = syscon_node_to_regmap(pdev->dev.of_node);
|
|
if (IS_ERR(sys_ctrl))
|
|
return PTR_ERR(sys_ctrl);
|
|
|
|
ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
|
|
if (!ctx)
|
|
return -ENOMEM;
|
|
|
|
ctx->sys_ctrl = sys_ctrl;
|
|
ctx->restart_handler.notifier_call = ox820_restart_handle;
|
|
ctx->restart_handler.priority = 192;
|
|
err = register_restart_handler(&ctx->restart_handler);
|
|
if (err)
|
|
dev_err(dev, "can't register restart notifier (err=%d)\n", err);
|
|
|
|
return err;
|
|
}
|
|
|
|
static const struct of_device_id ox820_restart_of_match[] = {
|
|
{ .compatible = "oxsemi,ox820-sys-ctrl" },
|
|
{}
|
|
};
|
|
|
|
static struct platform_driver ox820_restart_driver = {
|
|
.probe = ox820_restart_probe,
|
|
.driver = {
|
|
.name = "ox820-chip-reset",
|
|
.of_match_table = ox820_restart_of_match,
|
|
},
|
|
};
|
|
builtin_platform_driver(ox820_restart_driver);
|