mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-24 03:24:55 +08:00
e3084ed48f
Core changes: - New standard enumerator and corresponding device tree bindings for output impedance pin configuration. (Implemented and used in the Renesas rzg2l driver.) - Cleanup of Kconfig and Makefile to be somewhat orderly and alphabetic. New drivers: - Samsung Exynos 7885 pin controller. - Ocelot LAN966x pin controller. - Qualcomm SDX65 pin controller. - Qualcomm SM8450 pin controller. - Qualcomm PM8019, PM8226 and PM2250 pin controllers. - NXP/Freescale i.MXRT1050 pin controller. - Intel Thunder Bay pin controller. Enhancements: - Introduction of the string library helper function "kasprintf_strarray()" and subsequent use in Rockchip, ST and Armada pin control drivers, as well as the GPIO mockup driver. - The Ocelot pin controller has been extensively rewritten to use regmap and other modern kernel infrastructure. - The Microchip SGPIO driver has been converted to use regmap. - The SPEAr driver had been converted to use regmap. - Substantial cleanups and janitorial on the Apple pin control driver that was merged for v5.16. - Janitorial to remove of_node assignments in the GPIO portions that anyway get this handled in the GPIO core. - Minor cleanups and improvements in several pin controllers. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAmHetMgACgkQQRCzN7AZ XXOXUA/+I8nEdBy8oBa+vYsJp/FwQi9oh2r488Bin7kCEwYJjPKDDjZuIQQQz34H DcSpzBBB/sSFiO27F27rk70vHGfZ4pVi57XfRI2IB1qSe4uCNCNEURVDSM9aY7Nl hR973GS5VDvmyo/7zUT7dWmG2b9lxRqwU2wCvVJ7y69gQEwT74iR8b51ycziBNWt AEQ+BUN9oVEIM6aHs9+jGgD843XIFZMWoKuwoD51036/wFDLO3lQNyuMytZaQtSB q1epb51jl4tPhybWrWc+IoVp6BshIZs1m8+LhgRqLfJEj1znTZDXvAEuTuI3Y9BY lyyvGuKNbe6q1aD8Hfu3qiO8PfBrI+pNpOcdw84pG6IwBz4vfLmhzyMd8vTyqoK8 DIlfYCiGJB0aqDBWhRyql8KM04/gSlEm2eZONsudNuMugvRIxU1IOBaKFwlP5Z98 y2/mYo/wLnVFKZE6cLp3Lxjpv4ENRJ1HkQe5JQak1ulq+XkUL9f82p7oGMJ4lvoB iTOPTkuhhkiUYmwbb97VoqWTYwL+EptvsWto+Mv/glHy7OGXXJFTAD+ARpZc+c5I f1/mzQYujmVj91XUi9xSGnL07mNNPOiX3p+9q7Fy+A3Rk1x5n0t+7hvmiuv8paLv KNowhECllp0lBKns39tcn8BQvRufvxv2b+QvEqgUPVI3Qj8vEc4= =+nxh -----END PGP SIGNATURE----- Merge tag 'pinctrl-v5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control bulk updates from Linus Walleij: "Core changes: - New standard enumerator and corresponding device tree bindings for output impedance pin configuration. (Implemented and used in the Renesas rzg2l driver.) - Cleanup of Kconfig and Makefile to be somewhat orderly and alphabetic. New drivers: - Samsung Exynos 7885 pin controller. - Ocelot LAN966x pin controller. - Qualcomm SDX65 pin controller. - Qualcomm SM8450 pin controller. - Qualcomm PM8019, PM8226 and PM2250 pin controllers. - NXP/Freescale i.MXRT1050 pin controller. - Intel Thunder Bay pin controller. Enhancements: - Introduction of the string library helper function "kasprintf_strarray()" and subsequent use in Rockchip, ST and Armada pin control drivers, as well as the GPIO mockup driver. - The Ocelot pin controller has been extensively rewritten to use regmap and other modern kernel infrastructure. - The Microchip SGPIO driver has been converted to use regmap. - The SPEAr driver had been converted to use regmap. - Substantial cleanups and janitorial on the Apple pin control driver that was merged for v5.16. - Janitorial to remove of_node assignments in the GPIO portions that anyway get this handled in the GPIO core. - Minor cleanups and improvements in several pin controllers" * tag 'pinctrl-v5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (98 commits) pinctrl: imx: fix assigning groups names dt-bindings: pinctrl: mt8195: add wrapping node of pin configurations pinctrl: bcm: ns: use generic groups & functions helpers pinctrl: imx: fix allocation result check pinctrl: samsung: Use platform_get_irq_optional() to get the interrupt pinctrl: Propagate firmware node from a parent device dt-bindings: pinctrl: qcom: Add SDX65 pinctrl bindings pinctrl: add one more "const" for generic function groups pinctrl: keembay: rework loops looking for groups names pinctrl: keembay: comment process of building functions a bit pinctrl: imx: prepare for making "group_names" in "function_desc" const ARM: dts: gpio-ranges property is now required pinctrl: aspeed: fix unmet dependencies on MFD_SYSCON for PINCTRL_ASPEED pinctrl: Get rid of duplicate of_node assignment in the drivers pinctrl-sunxi: don't call pinctrl_gpio_direction() pinctrl-bcm2835: don't call pinctrl_gpio_direction() pinctrl: bcm2835: Silence uninit warning pinctrl: Sort Kconfig and Makefile entries alphabetically pinctrl: Add Intel Thunder Bay pinctrl driver dt-bindings: pinctrl: Add bindings for Intel Thunderbay pinctrl driver ...
1227 lines
27 KiB
C
1227 lines
27 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2018 MediaTek Inc.
|
|
*
|
|
* Author: Sean Wang <sean.wang@mediatek.com>
|
|
*
|
|
*/
|
|
|
|
#include <dt-bindings/pinctrl/mt65xx.h>
|
|
#include <linux/device.h>
|
|
#include <linux/err.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_irq.h>
|
|
|
|
#include "mtk-eint.h"
|
|
#include "pinctrl-mtk-common-v2.h"
|
|
|
|
/**
|
|
* struct mtk_drive_desc - the structure that holds the information
|
|
* of the driving current
|
|
* @min: the minimum current of this group
|
|
* @max: the maximum current of this group
|
|
* @step: the step current of this group
|
|
* @scal: the weight factor
|
|
*
|
|
* formula: output = ((input) / step - 1) * scal
|
|
*/
|
|
struct mtk_drive_desc {
|
|
u8 min;
|
|
u8 max;
|
|
u8 step;
|
|
u8 scal;
|
|
};
|
|
|
|
/* The groups of drive strength */
|
|
static const struct mtk_drive_desc mtk_drive[] = {
|
|
[DRV_GRP0] = { 4, 16, 4, 1 },
|
|
[DRV_GRP1] = { 4, 16, 4, 2 },
|
|
[DRV_GRP2] = { 2, 8, 2, 1 },
|
|
[DRV_GRP3] = { 2, 8, 2, 2 },
|
|
[DRV_GRP4] = { 2, 16, 2, 1 },
|
|
};
|
|
|
|
static void mtk_w32(struct mtk_pinctrl *pctl, u8 i, u32 reg, u32 val)
|
|
{
|
|
writel_relaxed(val, pctl->base[i] + reg);
|
|
}
|
|
|
|
static u32 mtk_r32(struct mtk_pinctrl *pctl, u8 i, u32 reg)
|
|
{
|
|
return readl_relaxed(pctl->base[i] + reg);
|
|
}
|
|
|
|
void mtk_rmw(struct mtk_pinctrl *pctl, u8 i, u32 reg, u32 mask, u32 set)
|
|
{
|
|
u32 val;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&pctl->lock, flags);
|
|
|
|
val = mtk_r32(pctl, i, reg);
|
|
val &= ~mask;
|
|
val |= set;
|
|
mtk_w32(pctl, i, reg, val);
|
|
|
|
spin_unlock_irqrestore(&pctl->lock, flags);
|
|
}
|
|
|
|
static int mtk_hw_pin_field_lookup(struct mtk_pinctrl *hw,
|
|
const struct mtk_pin_desc *desc,
|
|
int field, struct mtk_pin_field *pfd)
|
|
{
|
|
const struct mtk_pin_field_calc *c;
|
|
const struct mtk_pin_reg_calc *rc;
|
|
int start = 0, end, check;
|
|
bool found = false;
|
|
u32 bits;
|
|
|
|
if (hw->soc->reg_cal && hw->soc->reg_cal[field].range) {
|
|
rc = &hw->soc->reg_cal[field];
|
|
} else {
|
|
dev_dbg(hw->dev,
|
|
"Not support field %d for this soc\n", field);
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
end = rc->nranges - 1;
|
|
|
|
while (start <= end) {
|
|
check = (start + end) >> 1;
|
|
if (desc->number >= rc->range[check].s_pin
|
|
&& desc->number <= rc->range[check].e_pin) {
|
|
found = true;
|
|
break;
|
|
} else if (start == end)
|
|
break;
|
|
else if (desc->number < rc->range[check].s_pin)
|
|
end = check - 1;
|
|
else
|
|
start = check + 1;
|
|
}
|
|
|
|
if (!found) {
|
|
dev_dbg(hw->dev, "Not support field %d for pin = %d (%s)\n",
|
|
field, desc->number, desc->name);
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
c = rc->range + check;
|
|
|
|
if (c->i_base > hw->nbase - 1) {
|
|
dev_err(hw->dev,
|
|
"Invalid base for field %d for pin = %d (%s)\n",
|
|
field, desc->number, desc->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Calculated bits as the overall offset the pin is located at,
|
|
* if c->fixed is held, that determines the all the pins in the
|
|
* range use the same field with the s_pin.
|
|
*/
|
|
bits = c->fixed ? c->s_bit : c->s_bit +
|
|
(desc->number - c->s_pin) * (c->x_bits);
|
|
|
|
/* Fill pfd from bits. For example 32-bit register applied is assumed
|
|
* when c->sz_reg is equal to 32.
|
|
*/
|
|
pfd->index = c->i_base;
|
|
pfd->offset = c->s_addr + c->x_addrs * (bits / c->sz_reg);
|
|
pfd->bitpos = bits % c->sz_reg;
|
|
pfd->mask = (1 << c->x_bits) - 1;
|
|
|
|
/* pfd->next is used for indicating that bit wrapping-around happens
|
|
* which requires the manipulation for bit 0 starting in the next
|
|
* register to form the complete field read/write.
|
|
*/
|
|
pfd->next = pfd->bitpos + c->x_bits > c->sz_reg ? c->x_addrs : 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mtk_hw_pin_field_get(struct mtk_pinctrl *hw,
|
|
const struct mtk_pin_desc *desc,
|
|
int field, struct mtk_pin_field *pfd)
|
|
{
|
|
if (field < 0 || field >= PINCTRL_PIN_REG_MAX) {
|
|
dev_err(hw->dev, "Invalid Field %d\n", field);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return mtk_hw_pin_field_lookup(hw, desc, field, pfd);
|
|
}
|
|
|
|
static void mtk_hw_bits_part(struct mtk_pin_field *pf, int *h, int *l)
|
|
{
|
|
*l = 32 - pf->bitpos;
|
|
*h = get_count_order(pf->mask) - *l;
|
|
}
|
|
|
|
static void mtk_hw_write_cross_field(struct mtk_pinctrl *hw,
|
|
struct mtk_pin_field *pf, int value)
|
|
{
|
|
int nbits_l, nbits_h;
|
|
|
|
mtk_hw_bits_part(pf, &nbits_h, &nbits_l);
|
|
|
|
mtk_rmw(hw, pf->index, pf->offset, pf->mask << pf->bitpos,
|
|
(value & pf->mask) << pf->bitpos);
|
|
|
|
mtk_rmw(hw, pf->index, pf->offset + pf->next, BIT(nbits_h) - 1,
|
|
(value & pf->mask) >> nbits_l);
|
|
}
|
|
|
|
static void mtk_hw_read_cross_field(struct mtk_pinctrl *hw,
|
|
struct mtk_pin_field *pf, int *value)
|
|
{
|
|
int nbits_l, nbits_h, h, l;
|
|
|
|
mtk_hw_bits_part(pf, &nbits_h, &nbits_l);
|
|
|
|
l = (mtk_r32(hw, pf->index, pf->offset)
|
|
>> pf->bitpos) & (BIT(nbits_l) - 1);
|
|
h = (mtk_r32(hw, pf->index, pf->offset + pf->next))
|
|
& (BIT(nbits_h) - 1);
|
|
|
|
*value = (h << nbits_l) | l;
|
|
}
|
|
|
|
int mtk_hw_set_value(struct mtk_pinctrl *hw, const struct mtk_pin_desc *desc,
|
|
int field, int value)
|
|
{
|
|
struct mtk_pin_field pf;
|
|
int err;
|
|
|
|
err = mtk_hw_pin_field_get(hw, desc, field, &pf);
|
|
if (err)
|
|
return err;
|
|
|
|
if (value < 0 || value > pf.mask)
|
|
return -EINVAL;
|
|
|
|
if (!pf.next)
|
|
mtk_rmw(hw, pf.index, pf.offset, pf.mask << pf.bitpos,
|
|
(value & pf.mask) << pf.bitpos);
|
|
else
|
|
mtk_hw_write_cross_field(hw, &pf, value);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(mtk_hw_set_value);
|
|
|
|
int mtk_hw_get_value(struct mtk_pinctrl *hw, const struct mtk_pin_desc *desc,
|
|
int field, int *value)
|
|
{
|
|
struct mtk_pin_field pf;
|
|
int err;
|
|
|
|
err = mtk_hw_pin_field_get(hw, desc, field, &pf);
|
|
if (err)
|
|
return err;
|
|
|
|
if (!pf.next)
|
|
*value = (mtk_r32(hw, pf.index, pf.offset)
|
|
>> pf.bitpos) & pf.mask;
|
|
else
|
|
mtk_hw_read_cross_field(hw, &pf, value);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(mtk_hw_get_value);
|
|
|
|
static int mtk_xt_find_eint_num(struct mtk_pinctrl *hw, unsigned long eint_n)
|
|
{
|
|
const struct mtk_pin_desc *desc;
|
|
int i = 0;
|
|
|
|
desc = (const struct mtk_pin_desc *)hw->soc->pins;
|
|
|
|
while (i < hw->soc->npins) {
|
|
if (desc[i].eint.eint_n == eint_n)
|
|
return desc[i].number;
|
|
i++;
|
|
}
|
|
|
|
return EINT_NA;
|
|
}
|
|
|
|
/*
|
|
* Virtual GPIO only used inside SOC and not being exported to outside SOC.
|
|
* Some modules use virtual GPIO as eint (e.g. pmif or usb).
|
|
* In MTK platform, external interrupt (EINT) and GPIO is 1-1 mapping
|
|
* and we can set GPIO as eint.
|
|
* But some modules use specific eint which doesn't have real GPIO pin.
|
|
* So we use virtual GPIO to map it.
|
|
*/
|
|
|
|
bool mtk_is_virt_gpio(struct mtk_pinctrl *hw, unsigned int gpio_n)
|
|
{
|
|
const struct mtk_pin_desc *desc;
|
|
bool virt_gpio = false;
|
|
|
|
desc = (const struct mtk_pin_desc *)&hw->soc->pins[gpio_n];
|
|
|
|
/* if the GPIO is not supported for eint mode */
|
|
if (desc->eint.eint_m == NO_EINT_SUPPORT)
|
|
return virt_gpio;
|
|
|
|
if (desc->funcs && !desc->funcs[desc->eint.eint_m].name)
|
|
virt_gpio = true;
|
|
|
|
return virt_gpio;
|
|
}
|
|
EXPORT_SYMBOL_GPL(mtk_is_virt_gpio);
|
|
|
|
static int mtk_xt_get_gpio_n(void *data, unsigned long eint_n,
|
|
unsigned int *gpio_n,
|
|
struct gpio_chip **gpio_chip)
|
|
{
|
|
struct mtk_pinctrl *hw = (struct mtk_pinctrl *)data;
|
|
const struct mtk_pin_desc *desc;
|
|
|
|
desc = (const struct mtk_pin_desc *)hw->soc->pins;
|
|
*gpio_chip = &hw->chip;
|
|
|
|
/*
|
|
* Be greedy to guess first gpio_n is equal to eint_n.
|
|
* Only eint virtual eint number is greater than gpio number.
|
|
*/
|
|
if (hw->soc->npins > eint_n &&
|
|
desc[eint_n].eint.eint_n == eint_n)
|
|
*gpio_n = eint_n;
|
|
else
|
|
*gpio_n = mtk_xt_find_eint_num(hw, eint_n);
|
|
|
|
return *gpio_n == EINT_NA ? -EINVAL : 0;
|
|
}
|
|
|
|
static int mtk_xt_get_gpio_state(void *data, unsigned long eint_n)
|
|
{
|
|
struct mtk_pinctrl *hw = (struct mtk_pinctrl *)data;
|
|
const struct mtk_pin_desc *desc;
|
|
struct gpio_chip *gpio_chip;
|
|
unsigned int gpio_n;
|
|
int value, err;
|
|
|
|
err = mtk_xt_get_gpio_n(hw, eint_n, &gpio_n, &gpio_chip);
|
|
if (err)
|
|
return err;
|
|
|
|
desc = (const struct mtk_pin_desc *)&hw->soc->pins[gpio_n];
|
|
|
|
err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DI, &value);
|
|
if (err)
|
|
return err;
|
|
|
|
return !!value;
|
|
}
|
|
|
|
static int mtk_xt_set_gpio_as_eint(void *data, unsigned long eint_n)
|
|
{
|
|
struct mtk_pinctrl *hw = (struct mtk_pinctrl *)data;
|
|
const struct mtk_pin_desc *desc;
|
|
struct gpio_chip *gpio_chip;
|
|
unsigned int gpio_n;
|
|
int err;
|
|
|
|
err = mtk_xt_get_gpio_n(hw, eint_n, &gpio_n, &gpio_chip);
|
|
if (err)
|
|
return err;
|
|
|
|
if (mtk_is_virt_gpio(hw, gpio_n))
|
|
return 0;
|
|
|
|
desc = (const struct mtk_pin_desc *)&hw->soc->pins[gpio_n];
|
|
|
|
err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_MODE,
|
|
desc->eint.eint_m);
|
|
if (err)
|
|
return err;
|
|
|
|
err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DIR, MTK_INPUT);
|
|
if (err)
|
|
return err;
|
|
|
|
err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_SMT, MTK_ENABLE);
|
|
/* SMT is supposed to be supported by every real GPIO and doesn't
|
|
* support virtual GPIOs, so the extra condition err != -ENOTSUPP
|
|
* is just for adding EINT support to these virtual GPIOs. It should
|
|
* add an extra flag in the pin descriptor when more pins with
|
|
* distinctive characteristic come out.
|
|
*/
|
|
if (err && err != -ENOTSUPP)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct mtk_eint_xt mtk_eint_xt = {
|
|
.get_gpio_n = mtk_xt_get_gpio_n,
|
|
.get_gpio_state = mtk_xt_get_gpio_state,
|
|
.set_gpio_as_eint = mtk_xt_set_gpio_as_eint,
|
|
};
|
|
|
|
int mtk_build_eint(struct mtk_pinctrl *hw, struct platform_device *pdev)
|
|
{
|
|
struct device_node *np = pdev->dev.of_node;
|
|
int ret;
|
|
|
|
if (!IS_ENABLED(CONFIG_EINT_MTK))
|
|
return 0;
|
|
|
|
if (!of_property_read_bool(np, "interrupt-controller"))
|
|
return -ENODEV;
|
|
|
|
hw->eint = devm_kzalloc(hw->dev, sizeof(*hw->eint), GFP_KERNEL);
|
|
if (!hw->eint)
|
|
return -ENOMEM;
|
|
|
|
hw->eint->base = devm_platform_ioremap_resource_byname(pdev, "eint");
|
|
if (IS_ERR(hw->eint->base)) {
|
|
ret = PTR_ERR(hw->eint->base);
|
|
goto err_free_eint;
|
|
}
|
|
|
|
hw->eint->irq = irq_of_parse_and_map(np, 0);
|
|
if (!hw->eint->irq) {
|
|
ret = -EINVAL;
|
|
goto err_free_eint;
|
|
}
|
|
|
|
if (!hw->soc->eint_hw) {
|
|
ret = -ENODEV;
|
|
goto err_free_eint;
|
|
}
|
|
|
|
hw->eint->dev = &pdev->dev;
|
|
hw->eint->hw = hw->soc->eint_hw;
|
|
hw->eint->pctl = hw;
|
|
hw->eint->gpio_xlate = &mtk_eint_xt;
|
|
|
|
return mtk_eint_do_init(hw->eint);
|
|
|
|
err_free_eint:
|
|
devm_kfree(hw->dev, hw->eint);
|
|
hw->eint = NULL;
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(mtk_build_eint);
|
|
|
|
/* Revision 0 */
|
|
int mtk_pinconf_bias_disable_set(struct mtk_pinctrl *hw,
|
|
const struct mtk_pin_desc *desc)
|
|
{
|
|
int err;
|
|
|
|
err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_PU,
|
|
MTK_DISABLE);
|
|
if (err)
|
|
return err;
|
|
|
|
err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_PD,
|
|
MTK_DISABLE);
|
|
if (err)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(mtk_pinconf_bias_disable_set);
|
|
|
|
int mtk_pinconf_bias_disable_get(struct mtk_pinctrl *hw,
|
|
const struct mtk_pin_desc *desc, int *res)
|
|
{
|
|
int v, v2;
|
|
int err;
|
|
|
|
err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_PU, &v);
|
|
if (err)
|
|
return err;
|
|
|
|
err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_PD, &v2);
|
|
if (err)
|
|
return err;
|
|
|
|
if (v == MTK_ENABLE || v2 == MTK_ENABLE)
|
|
return -EINVAL;
|
|
|
|
*res = 1;
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(mtk_pinconf_bias_disable_get);
|
|
|
|
int mtk_pinconf_bias_set(struct mtk_pinctrl *hw,
|
|
const struct mtk_pin_desc *desc, bool pullup)
|
|
{
|
|
int err, arg;
|
|
|
|
arg = pullup ? 1 : 2;
|
|
|
|
err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_PU, arg & 1);
|
|
if (err)
|
|
return err;
|
|
|
|
err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_PD,
|
|
!!(arg & 2));
|
|
if (err)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(mtk_pinconf_bias_set);
|
|
|
|
int mtk_pinconf_bias_get(struct mtk_pinctrl *hw,
|
|
const struct mtk_pin_desc *desc, bool pullup, int *res)
|
|
{
|
|
int reg, err, v;
|
|
|
|
reg = pullup ? PINCTRL_PIN_REG_PU : PINCTRL_PIN_REG_PD;
|
|
|
|
err = mtk_hw_get_value(hw, desc, reg, &v);
|
|
if (err)
|
|
return err;
|
|
|
|
if (!v)
|
|
return -EINVAL;
|
|
|
|
*res = 1;
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(mtk_pinconf_bias_get);
|
|
|
|
/* Revision 1 */
|
|
int mtk_pinconf_bias_disable_set_rev1(struct mtk_pinctrl *hw,
|
|
const struct mtk_pin_desc *desc)
|
|
{
|
|
return mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_PULLEN,
|
|
MTK_DISABLE);
|
|
}
|
|
EXPORT_SYMBOL_GPL(mtk_pinconf_bias_disable_set_rev1);
|
|
|
|
int mtk_pinconf_bias_disable_get_rev1(struct mtk_pinctrl *hw,
|
|
const struct mtk_pin_desc *desc, int *res)
|
|
{
|
|
int v, err;
|
|
|
|
err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_PULLEN, &v);
|
|
if (err)
|
|
return err;
|
|
|
|
if (v == MTK_ENABLE)
|
|
return -EINVAL;
|
|
|
|
*res = 1;
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(mtk_pinconf_bias_disable_get_rev1);
|
|
|
|
int mtk_pinconf_bias_set_rev1(struct mtk_pinctrl *hw,
|
|
const struct mtk_pin_desc *desc, bool pullup)
|
|
{
|
|
int err, arg;
|
|
|
|
arg = pullup ? MTK_PULLUP : MTK_PULLDOWN;
|
|
|
|
err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_PULLEN,
|
|
MTK_ENABLE);
|
|
if (err)
|
|
return err;
|
|
|
|
err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_PULLSEL, arg);
|
|
if (err)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(mtk_pinconf_bias_set_rev1);
|
|
|
|
int mtk_pinconf_bias_get_rev1(struct mtk_pinctrl *hw,
|
|
const struct mtk_pin_desc *desc, bool pullup,
|
|
int *res)
|
|
{
|
|
int err, v;
|
|
|
|
err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_PULLEN, &v);
|
|
if (err)
|
|
return err;
|
|
|
|
if (v == MTK_DISABLE)
|
|
return -EINVAL;
|
|
|
|
err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_PULLSEL, &v);
|
|
if (err)
|
|
return err;
|
|
|
|
if (pullup ^ (v == MTK_PULLUP))
|
|
return -EINVAL;
|
|
|
|
*res = 1;
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(mtk_pinconf_bias_get_rev1);
|
|
|
|
/* Combo for the following pull register type:
|
|
* 1. PU + PD
|
|
* 2. PULLSEL + PULLEN
|
|
* 3. PUPD + R0 + R1
|
|
*/
|
|
static int mtk_pinconf_bias_set_pu_pd(struct mtk_pinctrl *hw,
|
|
const struct mtk_pin_desc *desc,
|
|
u32 pullup, u32 arg)
|
|
{
|
|
int err, pu, pd;
|
|
|
|
if (arg == MTK_DISABLE) {
|
|
pu = 0;
|
|
pd = 0;
|
|
} else if ((arg == MTK_ENABLE) && pullup) {
|
|
pu = 1;
|
|
pd = 0;
|
|
} else if ((arg == MTK_ENABLE) && !pullup) {
|
|
pu = 0;
|
|
pd = 1;
|
|
} else {
|
|
err = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_PU, pu);
|
|
if (err)
|
|
goto out;
|
|
|
|
err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_PD, pd);
|
|
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
static int mtk_pinconf_bias_set_pullsel_pullen(struct mtk_pinctrl *hw,
|
|
const struct mtk_pin_desc *desc,
|
|
u32 pullup, u32 arg)
|
|
{
|
|
int err, enable;
|
|
|
|
if (arg == MTK_DISABLE)
|
|
enable = 0;
|
|
else if (arg == MTK_ENABLE)
|
|
enable = 1;
|
|
else {
|
|
err = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_PULLEN, enable);
|
|
if (err)
|
|
goto out;
|
|
|
|
err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_PULLSEL, pullup);
|
|
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
static int mtk_pinconf_bias_set_pupd_r1_r0(struct mtk_pinctrl *hw,
|
|
const struct mtk_pin_desc *desc,
|
|
u32 pullup, u32 arg)
|
|
{
|
|
int err, r0, r1;
|
|
|
|
if ((arg == MTK_DISABLE) || (arg == MTK_PUPD_SET_R1R0_00)) {
|
|
pullup = 0;
|
|
r0 = 0;
|
|
r1 = 0;
|
|
} else if (arg == MTK_PUPD_SET_R1R0_01) {
|
|
r0 = 1;
|
|
r1 = 0;
|
|
} else if (arg == MTK_PUPD_SET_R1R0_10) {
|
|
r0 = 0;
|
|
r1 = 1;
|
|
} else if (arg == MTK_PUPD_SET_R1R0_11) {
|
|
r0 = 1;
|
|
r1 = 1;
|
|
} else {
|
|
err = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
/* MTK HW PUPD bit: 1 for pull-down, 0 for pull-up */
|
|
err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_PUPD, !pullup);
|
|
if (err)
|
|
goto out;
|
|
|
|
err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_R0, r0);
|
|
if (err)
|
|
goto out;
|
|
|
|
err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_R1, r1);
|
|
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
static int mtk_hw_pin_rsel_lookup(struct mtk_pinctrl *hw,
|
|
const struct mtk_pin_desc *desc,
|
|
u32 pullup, u32 arg, u32 *rsel_val)
|
|
{
|
|
const struct mtk_pin_rsel *rsel;
|
|
int check;
|
|
bool found = false;
|
|
|
|
rsel = hw->soc->pin_rsel;
|
|
|
|
for (check = 0; check <= hw->soc->npin_rsel - 1; check++) {
|
|
if (desc->number >= rsel[check].s_pin &&
|
|
desc->number <= rsel[check].e_pin) {
|
|
if (pullup) {
|
|
if (rsel[check].up_rsel == arg) {
|
|
found = true;
|
|
*rsel_val = rsel[check].rsel_index;
|
|
break;
|
|
}
|
|
} else {
|
|
if (rsel[check].down_rsel == arg) {
|
|
found = true;
|
|
*rsel_val = rsel[check].rsel_index;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
if (!found) {
|
|
dev_err(hw->dev, "Not support rsel value %d Ohm for pin = %d (%s)\n",
|
|
arg, desc->number, desc->name);
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mtk_pinconf_bias_set_rsel(struct mtk_pinctrl *hw,
|
|
const struct mtk_pin_desc *desc,
|
|
u32 pullup, u32 arg)
|
|
{
|
|
int err, rsel_val;
|
|
|
|
if (hw->rsel_si_unit) {
|
|
/* find pin rsel_index from pin_rsel array*/
|
|
err = mtk_hw_pin_rsel_lookup(hw, desc, pullup, arg, &rsel_val);
|
|
if (err)
|
|
goto out;
|
|
} else {
|
|
if (arg < MTK_PULL_SET_RSEL_000 ||
|
|
arg > MTK_PULL_SET_RSEL_111) {
|
|
err = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
rsel_val = arg - MTK_PULL_SET_RSEL_000;
|
|
}
|
|
|
|
err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_RSEL, rsel_val);
|
|
if (err)
|
|
goto out;
|
|
|
|
err = mtk_pinconf_bias_set_pu_pd(hw, desc, pullup, MTK_ENABLE);
|
|
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
int mtk_pinconf_bias_set_combo(struct mtk_pinctrl *hw,
|
|
const struct mtk_pin_desc *desc,
|
|
u32 pullup, u32 arg)
|
|
{
|
|
int err = -ENOTSUPP;
|
|
u32 try_all_type;
|
|
|
|
if (hw->soc->pull_type)
|
|
try_all_type = hw->soc->pull_type[desc->number];
|
|
else
|
|
try_all_type = MTK_PULL_TYPE_MASK;
|
|
|
|
if (try_all_type & MTK_PULL_RSEL_TYPE) {
|
|
err = mtk_pinconf_bias_set_rsel(hw, desc, pullup, arg);
|
|
if (!err)
|
|
return err;
|
|
}
|
|
|
|
if (try_all_type & MTK_PULL_PU_PD_TYPE) {
|
|
err = mtk_pinconf_bias_set_pu_pd(hw, desc, pullup, arg);
|
|
if (!err)
|
|
return err;
|
|
}
|
|
|
|
if (try_all_type & MTK_PULL_PULLSEL_TYPE) {
|
|
err = mtk_pinconf_bias_set_pullsel_pullen(hw, desc,
|
|
pullup, arg);
|
|
if (!err)
|
|
return err;
|
|
}
|
|
|
|
if (try_all_type & MTK_PULL_PUPD_R1R0_TYPE)
|
|
err = mtk_pinconf_bias_set_pupd_r1_r0(hw, desc, pullup, arg);
|
|
|
|
if (err)
|
|
dev_err(hw->dev, "Invalid pull argument\n");
|
|
|
|
return err;
|
|
}
|
|
EXPORT_SYMBOL_GPL(mtk_pinconf_bias_set_combo);
|
|
|
|
static int mtk_rsel_get_si_unit(struct mtk_pinctrl *hw,
|
|
const struct mtk_pin_desc *desc,
|
|
u32 pullup, u32 rsel_val, u32 *si_unit)
|
|
{
|
|
const struct mtk_pin_rsel *rsel;
|
|
int check;
|
|
|
|
rsel = hw->soc->pin_rsel;
|
|
|
|
for (check = 0; check <= hw->soc->npin_rsel - 1; check++) {
|
|
if (desc->number >= rsel[check].s_pin &&
|
|
desc->number <= rsel[check].e_pin) {
|
|
if (rsel_val == rsel[check].rsel_index) {
|
|
if (pullup)
|
|
*si_unit = rsel[check].up_rsel;
|
|
else
|
|
*si_unit = rsel[check].down_rsel;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mtk_pinconf_bias_get_rsel(struct mtk_pinctrl *hw,
|
|
const struct mtk_pin_desc *desc,
|
|
u32 *pullup, u32 *enable)
|
|
{
|
|
int pu, pd, rsel, err;
|
|
|
|
err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_RSEL, &rsel);
|
|
if (err)
|
|
goto out;
|
|
|
|
err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_PU, &pu);
|
|
if (err)
|
|
goto out;
|
|
|
|
err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_PD, &pd);
|
|
if (err)
|
|
goto out;
|
|
|
|
if (pu == 0 && pd == 0) {
|
|
*pullup = 0;
|
|
*enable = MTK_DISABLE;
|
|
} else if (pu == 1 && pd == 0) {
|
|
*pullup = 1;
|
|
if (hw->rsel_si_unit)
|
|
mtk_rsel_get_si_unit(hw, desc, *pullup, rsel, enable);
|
|
else
|
|
*enable = rsel + MTK_PULL_SET_RSEL_000;
|
|
} else if (pu == 0 && pd == 1) {
|
|
*pullup = 0;
|
|
if (hw->rsel_si_unit)
|
|
mtk_rsel_get_si_unit(hw, desc, *pullup, rsel, enable);
|
|
else
|
|
*enable = rsel + MTK_PULL_SET_RSEL_000;
|
|
} else {
|
|
err = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
static int mtk_pinconf_bias_get_pu_pd(struct mtk_pinctrl *hw,
|
|
const struct mtk_pin_desc *desc,
|
|
u32 *pullup, u32 *enable)
|
|
{
|
|
int err, pu, pd;
|
|
|
|
err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_PU, &pu);
|
|
if (err)
|
|
goto out;
|
|
|
|
err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_PD, &pd);
|
|
if (err)
|
|
goto out;
|
|
|
|
if (pu == 0 && pd == 0) {
|
|
*pullup = 0;
|
|
*enable = MTK_DISABLE;
|
|
} else if (pu == 1 && pd == 0) {
|
|
*pullup = 1;
|
|
*enable = MTK_ENABLE;
|
|
} else if (pu == 0 && pd == 1) {
|
|
*pullup = 0;
|
|
*enable = MTK_ENABLE;
|
|
} else
|
|
err = -EINVAL;
|
|
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
static int mtk_pinconf_bias_get_pullsel_pullen(struct mtk_pinctrl *hw,
|
|
const struct mtk_pin_desc *desc,
|
|
u32 *pullup, u32 *enable)
|
|
{
|
|
int err;
|
|
|
|
err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_PULLSEL, pullup);
|
|
if (err)
|
|
goto out;
|
|
|
|
err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_PULLEN, enable);
|
|
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
static int mtk_pinconf_bias_get_pupd_r1_r0(struct mtk_pinctrl *hw,
|
|
const struct mtk_pin_desc *desc,
|
|
u32 *pullup, u32 *enable)
|
|
{
|
|
int err, r0, r1;
|
|
|
|
err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_PUPD, pullup);
|
|
if (err)
|
|
goto out;
|
|
/* MTK HW PUPD bit: 1 for pull-down, 0 for pull-up */
|
|
*pullup = !(*pullup);
|
|
|
|
err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_R0, &r0);
|
|
if (err)
|
|
goto out;
|
|
|
|
err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_R1, &r1);
|
|
if (err)
|
|
goto out;
|
|
|
|
if ((r1 == 0) && (r0 == 0))
|
|
*enable = MTK_PUPD_SET_R1R0_00;
|
|
else if ((r1 == 0) && (r0 == 1))
|
|
*enable = MTK_PUPD_SET_R1R0_01;
|
|
else if ((r1 == 1) && (r0 == 0))
|
|
*enable = MTK_PUPD_SET_R1R0_10;
|
|
else if ((r1 == 1) && (r0 == 1))
|
|
*enable = MTK_PUPD_SET_R1R0_11;
|
|
else
|
|
err = -EINVAL;
|
|
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
int mtk_pinconf_bias_get_combo(struct mtk_pinctrl *hw,
|
|
const struct mtk_pin_desc *desc,
|
|
u32 *pullup, u32 *enable)
|
|
{
|
|
int err = -ENOTSUPP;
|
|
u32 try_all_type;
|
|
|
|
if (hw->soc->pull_type)
|
|
try_all_type = hw->soc->pull_type[desc->number];
|
|
else
|
|
try_all_type = MTK_PULL_TYPE_MASK;
|
|
|
|
if (try_all_type & MTK_PULL_RSEL_TYPE) {
|
|
err = mtk_pinconf_bias_get_rsel(hw, desc, pullup, enable);
|
|
if (!err)
|
|
return err;
|
|
}
|
|
|
|
if (try_all_type & MTK_PULL_PU_PD_TYPE) {
|
|
err = mtk_pinconf_bias_get_pu_pd(hw, desc, pullup, enable);
|
|
if (!err)
|
|
return err;
|
|
}
|
|
|
|
if (try_all_type & MTK_PULL_PULLSEL_TYPE) {
|
|
err = mtk_pinconf_bias_get_pullsel_pullen(hw, desc,
|
|
pullup, enable);
|
|
if (!err)
|
|
return err;
|
|
}
|
|
|
|
if (try_all_type & MTK_PULL_PUPD_R1R0_TYPE)
|
|
err = mtk_pinconf_bias_get_pupd_r1_r0(hw, desc, pullup, enable);
|
|
|
|
return err;
|
|
}
|
|
EXPORT_SYMBOL_GPL(mtk_pinconf_bias_get_combo);
|
|
|
|
/* Revision 0 */
|
|
int mtk_pinconf_drive_set(struct mtk_pinctrl *hw,
|
|
const struct mtk_pin_desc *desc, u32 arg)
|
|
{
|
|
const struct mtk_drive_desc *tb;
|
|
int err = -ENOTSUPP;
|
|
|
|
tb = &mtk_drive[desc->drv_n];
|
|
/* 4mA when (e8, e4) = (0, 0)
|
|
* 8mA when (e8, e4) = (0, 1)
|
|
* 12mA when (e8, e4) = (1, 0)
|
|
* 16mA when (e8, e4) = (1, 1)
|
|
*/
|
|
if ((arg >= tb->min && arg <= tb->max) && !(arg % tb->step)) {
|
|
arg = (arg / tb->step - 1) * tb->scal;
|
|
err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_E4,
|
|
arg & 0x1);
|
|
if (err)
|
|
return err;
|
|
|
|
err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_E8,
|
|
(arg & 0x2) >> 1);
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
return err;
|
|
}
|
|
EXPORT_SYMBOL_GPL(mtk_pinconf_drive_set);
|
|
|
|
int mtk_pinconf_drive_get(struct mtk_pinctrl *hw,
|
|
const struct mtk_pin_desc *desc, int *val)
|
|
{
|
|
const struct mtk_drive_desc *tb;
|
|
int err, val1, val2;
|
|
|
|
tb = &mtk_drive[desc->drv_n];
|
|
|
|
err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_E4, &val1);
|
|
if (err)
|
|
return err;
|
|
|
|
err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_E8, &val2);
|
|
if (err)
|
|
return err;
|
|
|
|
/* 4mA when (e8, e4) = (0, 0); 8mA when (e8, e4) = (0, 1)
|
|
* 12mA when (e8, e4) = (1, 0); 16mA when (e8, e4) = (1, 1)
|
|
*/
|
|
*val = (((val2 << 1) + val1) / tb->scal + 1) * tb->step;
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(mtk_pinconf_drive_get);
|
|
|
|
/* Revision 1 */
|
|
int mtk_pinconf_drive_set_rev1(struct mtk_pinctrl *hw,
|
|
const struct mtk_pin_desc *desc, u32 arg)
|
|
{
|
|
const struct mtk_drive_desc *tb;
|
|
int err = -ENOTSUPP;
|
|
|
|
tb = &mtk_drive[desc->drv_n];
|
|
|
|
if ((arg >= tb->min && arg <= tb->max) && !(arg % tb->step)) {
|
|
arg = (arg / tb->step - 1) * tb->scal;
|
|
|
|
err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DRV,
|
|
arg);
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
return err;
|
|
}
|
|
EXPORT_SYMBOL_GPL(mtk_pinconf_drive_set_rev1);
|
|
|
|
int mtk_pinconf_drive_get_rev1(struct mtk_pinctrl *hw,
|
|
const struct mtk_pin_desc *desc, int *val)
|
|
{
|
|
const struct mtk_drive_desc *tb;
|
|
int err, val1;
|
|
|
|
tb = &mtk_drive[desc->drv_n];
|
|
|
|
err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DRV, &val1);
|
|
if (err)
|
|
return err;
|
|
|
|
*val = ((val1 & 0x7) / tb->scal + 1) * tb->step;
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(mtk_pinconf_drive_get_rev1);
|
|
|
|
int mtk_pinconf_drive_set_raw(struct mtk_pinctrl *hw,
|
|
const struct mtk_pin_desc *desc, u32 arg)
|
|
{
|
|
return mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DRV, arg);
|
|
}
|
|
EXPORT_SYMBOL_GPL(mtk_pinconf_drive_set_raw);
|
|
|
|
int mtk_pinconf_drive_get_raw(struct mtk_pinctrl *hw,
|
|
const struct mtk_pin_desc *desc, int *val)
|
|
{
|
|
return mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DRV, val);
|
|
}
|
|
EXPORT_SYMBOL_GPL(mtk_pinconf_drive_get_raw);
|
|
|
|
int mtk_pinconf_adv_pull_set(struct mtk_pinctrl *hw,
|
|
const struct mtk_pin_desc *desc, bool pullup,
|
|
u32 arg)
|
|
{
|
|
int err;
|
|
|
|
/* 10K off & 50K (75K) off, when (R0, R1) = (0, 0);
|
|
* 10K off & 50K (75K) on, when (R0, R1) = (0, 1);
|
|
* 10K on & 50K (75K) off, when (R0, R1) = (1, 0);
|
|
* 10K on & 50K (75K) on, when (R0, R1) = (1, 1)
|
|
*/
|
|
err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_R0, arg & 1);
|
|
if (err)
|
|
return 0;
|
|
|
|
err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_R1,
|
|
!!(arg & 2));
|
|
if (err)
|
|
return 0;
|
|
|
|
arg = pullup ? 0 : 1;
|
|
|
|
err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_PUPD, arg);
|
|
|
|
/* If PUPD register is not supported for that pin, let's fallback to
|
|
* general bias control.
|
|
*/
|
|
if (err == -ENOTSUPP) {
|
|
if (hw->soc->bias_set) {
|
|
err = hw->soc->bias_set(hw, desc, pullup);
|
|
if (err)
|
|
return err;
|
|
} else {
|
|
err = mtk_pinconf_bias_set_rev1(hw, desc, pullup);
|
|
if (err)
|
|
err = mtk_pinconf_bias_set(hw, desc, pullup);
|
|
}
|
|
}
|
|
|
|
return err;
|
|
}
|
|
EXPORT_SYMBOL_GPL(mtk_pinconf_adv_pull_set);
|
|
|
|
int mtk_pinconf_adv_pull_get(struct mtk_pinctrl *hw,
|
|
const struct mtk_pin_desc *desc, bool pullup,
|
|
u32 *val)
|
|
{
|
|
u32 t, t2;
|
|
int err;
|
|
|
|
err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_PUPD, &t);
|
|
|
|
/* If PUPD register is not supported for that pin, let's fallback to
|
|
* general bias control.
|
|
*/
|
|
if (err == -ENOTSUPP) {
|
|
if (hw->soc->bias_get) {
|
|
err = hw->soc->bias_get(hw, desc, pullup, val);
|
|
if (err)
|
|
return err;
|
|
} else {
|
|
return -ENOTSUPP;
|
|
}
|
|
} else {
|
|
/* t == 0 supposes PULLUP for the customized PULL setup */
|
|
if (err)
|
|
return err;
|
|
|
|
if (pullup ^ !t)
|
|
return -EINVAL;
|
|
}
|
|
|
|
err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_R0, &t);
|
|
if (err)
|
|
return err;
|
|
|
|
err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_R1, &t2);
|
|
if (err)
|
|
return err;
|
|
|
|
*val = (t | t2 << 1) & 0x7;
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(mtk_pinconf_adv_pull_get);
|
|
|
|
int mtk_pinconf_adv_drive_set(struct mtk_pinctrl *hw,
|
|
const struct mtk_pin_desc *desc, u32 arg)
|
|
{
|
|
int err;
|
|
int en = arg & 1;
|
|
int e0 = !!(arg & 2);
|
|
int e1 = !!(arg & 4);
|
|
|
|
err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DRV_EN, en);
|
|
if (err)
|
|
return err;
|
|
|
|
if (!en)
|
|
return err;
|
|
|
|
err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DRV_E0, e0);
|
|
if (err)
|
|
return err;
|
|
|
|
err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DRV_E1, e1);
|
|
if (err)
|
|
return err;
|
|
|
|
return err;
|
|
}
|
|
EXPORT_SYMBOL_GPL(mtk_pinconf_adv_drive_set);
|
|
|
|
int mtk_pinconf_adv_drive_get(struct mtk_pinctrl *hw,
|
|
const struct mtk_pin_desc *desc, u32 *val)
|
|
{
|
|
u32 en, e0, e1;
|
|
int err;
|
|
|
|
err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DRV_EN, &en);
|
|
if (err)
|
|
return err;
|
|
|
|
err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DRV_E0, &e0);
|
|
if (err)
|
|
return err;
|
|
|
|
err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DRV_E1, &e1);
|
|
if (err)
|
|
return err;
|
|
|
|
*val = (en | e0 << 1 | e1 << 2) & 0x7;
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(mtk_pinconf_adv_drive_get);
|
|
|
|
int mtk_pinconf_adv_drive_set_raw(struct mtk_pinctrl *hw,
|
|
const struct mtk_pin_desc *desc, u32 arg)
|
|
{
|
|
return mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DRV_ADV, arg);
|
|
}
|
|
EXPORT_SYMBOL_GPL(mtk_pinconf_adv_drive_set_raw);
|
|
|
|
int mtk_pinconf_adv_drive_get_raw(struct mtk_pinctrl *hw,
|
|
const struct mtk_pin_desc *desc, u32 *val)
|
|
{
|
|
return mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DRV_ADV, val);
|
|
}
|
|
EXPORT_SYMBOL_GPL(mtk_pinconf_adv_drive_get_raw);
|
|
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>");
|
|
MODULE_DESCRIPTION("Pin configuration library module for mediatek SoCs");
|