..
accel
iio: adc: Explicitly include correct DT includes
2023-07-23 13:38:13 +01:00
adc
iio: adc: Explicitly include correct DT includes
2023-07-23 13:38:13 +01:00
addac
iio: addac: ad74413: don't set DIN_SINK for functions other than digital input
2023-06-04 12:25:01 +01:00
afe
iio: afe: rescale: export symbols used during testing
2022-07-16 19:01:14 +01:00
amplifiers
iio: amplifiers: ad8366: add support for HMC792A Attenuator
2023-07-23 12:22:56 +01:00
buffer
iio: Don't silently expect attribute types
2022-11-23 19:44:04 +00:00
cdc
iio: Switch i2c drivers back to use .probe()
2023-05-21 18:54:53 +01:00
chemical
iio: chemical: scd4x: Add pressure compensation
2023-07-20 19:21:30 +01:00
common
iio: make invensense timestamp module generic
2023-07-20 19:21:28 +01:00
dac
1st set of IIO new device support, features and cleanup for the 6.5 cycle.
2023-06-15 13:01:55 +02:00
dummy
Bitmap patches for 5.19-rc1
2022-06-04 14:04:27 -07:00
filter
iio: filter: admv8818: close potential out-of-bounds read in __admv8818_read_[h|l]pf_freq()
2022-11-23 19:43:57 +00:00
frequency
iio: frequency: admv1013: Benefit from devm_clk_get_enabled() to simplify
2023-03-18 16:35:26 +00:00
gyro
iio: Switch i2c drivers back to use .probe()
2023-05-21 18:54:53 +01:00
health
iio: Switch i2c drivers back to use .probe()
2023-05-21 18:54:53 +01:00
humidity
iio: Switch i2c drivers back to use .probe()
2023-05-21 18:54:53 +01:00
imu
iio: imu: adis16475.c: Add has_burst32 flag to adis16477 devices
2023-07-23 13:24:33 +01:00
light
iio: light: vcnl4000: Add calibration bias for 4040/4200
2023-07-20 19:21:29 +01:00
magnetometer
1st set of IIO new device support, features and cleanup for the 6.5 cycle.
2023-06-15 13:01:55 +02:00
multiplexer
iio: multiplexer: Switch to use dev_err_probe() helper
2022-11-23 19:43:57 +00:00
orientation
position
potentiometer
iio: Switch i2c drivers back to use .probe()
2023-05-21 18:54:53 +01:00
potentiostat
iio: Switch i2c drivers back to use .probe()
2023-05-21 18:54:53 +01:00
pressure
iio: pressure: Honeywell mprls0025pa pressure sensor
2023-05-21 18:54:58 +01:00
proximity
iio: adc: Explicitly include correct DT includes
2023-07-23 13:38:13 +01:00
resolver
iio: resolver: ad2s90: Fix alignment for DMA safety
2022-06-14 11:53:19 +01:00
temperature
iio: adc: Explicitly include correct DT includes
2023-07-23 13:38:13 +01:00
test
iio: test: Mark file local structure arrays static.
2022-08-15 22:30:01 +01:00
trigger
iio: Rename iio_trigger_poll_chained and add kernel-doc
2023-03-11 12:18:29 +00:00
iio_core_trigger.h
iio_core.h
iio: Mark iio_device_type as const
2021-11-17 17:51:35 +00:00
industrialio-buffer.c
iio: buffer: fix coding style warnings
2023-05-13 17:56:06 +01:00
industrialio-configfs.c
industrialio-core.c
iio: core: Improve indentation in a few places
2023-07-23 10:24:16 +01:00
industrialio-event.c
iio: Add event enums for running period and count
2023-07-23 13:16:18 +01:00
industrialio-gts-helper.c
iio: gts-helpers: fix integration time units
2023-05-13 17:54:57 +01:00
industrialio-sw-device.c
iio: Don't use bare "unsigned"
2022-07-01 11:19:08 +01:00
industrialio-sw-trigger.c
iio: core: Fix entry not deleted when iio_register_sw_trigger_type() fails
2022-11-12 17:53:35 +00:00
industrialio-trigger.c
iio: Make return value check for set_trigger_state() consistent
2023-07-20 19:21:30 +01:00
industrialio-triggered-event.c
inkern.c
iio: inkern: fix coding style warnings
2022-08-15 22:30:00 +01:00
Kconfig
iio: light: Add gain-time-scale helpers
2023-04-10 12:26:34 +01:00
Makefile
iio: light: Add gain-time-scale helpers
2023-04-10 12:26:34 +01:00
TODO
iio: core: move 'mlock' to 'struct iio_dev_opaque'
2022-11-23 19:44:00 +00:00