mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-28 05:24:47 +08:00
aea4c39526
Some boards, such as tablets, have regulators providing power to parts of the display pipeline, like signal converters and LCD panels. Add labels to the simplefb device nodes so that we can reference them in the board dts files to add regulator supply properties. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
693 lines
18 KiB
Plaintext
693 lines
18 KiB
Plaintext
/*
|
|
* Copyright 2014 Chen-Yu Tsai
|
|
*
|
|
* Chen-Yu Tsai <wens@csie.org>
|
|
*
|
|
* This file is dual-licensed: you can use it either under the terms
|
|
* of the GPL or the X11 license, at your option. Note that this dual
|
|
* licensing only applies to this file, and not this project as a
|
|
* whole.
|
|
*
|
|
* a) This file is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of the
|
|
* License, or (at your option) any later version.
|
|
*
|
|
* This file is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* Or, alternatively,
|
|
*
|
|
* b) Permission is hereby granted, free of charge, to any person
|
|
* obtaining a copy of this software and associated documentation
|
|
* files (the "Software"), to deal in the Software without
|
|
* restriction, including without limitation the rights to use,
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
* sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following
|
|
* conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be
|
|
* included in all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
*/
|
|
|
|
#include "skeleton.dtsi"
|
|
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
|
|
#include <dt-bindings/pinctrl/sun4i-a10.h>
|
|
|
|
/ {
|
|
interrupt-parent = <&gic>;
|
|
|
|
chosen {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
simplefb_lcd: framebuffer@0 {
|
|
compatible = "allwinner,simple-framebuffer",
|
|
"simple-framebuffer";
|
|
allwinner,pipeline = "de_be0-lcd0";
|
|
clocks = <&pll6 0>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv7-timer";
|
|
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
|
|
clock-frequency = <24000000>;
|
|
arm,cpu-registers-not-fw-configured;
|
|
};
|
|
|
|
cpus {
|
|
enable-method = "allwinner,sun8i-a23";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@0 {
|
|
compatible = "arm,cortex-a7";
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
};
|
|
|
|
cpu@1 {
|
|
compatible = "arm,cortex-a7";
|
|
device_type = "cpu";
|
|
reg = <1>;
|
|
};
|
|
};
|
|
|
|
clocks {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
osc24M: osc24M_clk {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <24000000>;
|
|
clock-output-names = "osc24M";
|
|
};
|
|
|
|
osc32k: osc32k_clk {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <32768>;
|
|
clock-output-names = "osc32k";
|
|
};
|
|
|
|
pll1: clk@01c20000 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun8i-a23-pll1-clk";
|
|
reg = <0x01c20000 0x4>;
|
|
clocks = <&osc24M>;
|
|
clock-output-names = "pll1";
|
|
};
|
|
|
|
/* dummy clock until actually implemented */
|
|
pll5: pll5_clk {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <0>;
|
|
clock-output-names = "pll5";
|
|
};
|
|
|
|
pll6: clk@01c20028 {
|
|
#clock-cells = <1>;
|
|
compatible = "allwinner,sun6i-a31-pll6-clk";
|
|
reg = <0x01c20028 0x4>;
|
|
clocks = <&osc24M>;
|
|
clock-output-names = "pll6", "pll6x2";
|
|
};
|
|
|
|
cpu: cpu_clk@01c20050 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-cpu-clk";
|
|
reg = <0x01c20050 0x4>;
|
|
|
|
/*
|
|
* PLL1 is listed twice here.
|
|
* While it looks suspicious, it's actually documented
|
|
* that way both in the datasheet and in the code from
|
|
* Allwinner.
|
|
*/
|
|
clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
|
|
clock-output-names = "cpu";
|
|
};
|
|
|
|
axi: axi_clk@01c20050 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun8i-a23-axi-clk";
|
|
reg = <0x01c20050 0x4>;
|
|
clocks = <&cpu>;
|
|
clock-output-names = "axi";
|
|
};
|
|
|
|
ahb1: ahb1_clk@01c20054 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun6i-a31-ahb1-clk";
|
|
reg = <0x01c20054 0x4>;
|
|
clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
|
|
clock-output-names = "ahb1";
|
|
};
|
|
|
|
apb1: apb1_clk@01c20054 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-apb0-clk";
|
|
reg = <0x01c20054 0x4>;
|
|
clocks = <&ahb1>;
|
|
clock-output-names = "apb1";
|
|
};
|
|
|
|
apb1_gates: clk@01c20068 {
|
|
#clock-cells = <1>;
|
|
compatible = "allwinner,sun8i-a23-apb1-gates-clk";
|
|
reg = <0x01c20068 0x4>;
|
|
clocks = <&apb1>;
|
|
clock-indices = <0>, <5>,
|
|
<12>, <13>;
|
|
clock-output-names = "apb1_codec", "apb1_pio",
|
|
"apb1_daudio0", "apb1_daudio1";
|
|
};
|
|
|
|
apb2: clk@01c20058 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-apb1-clk";
|
|
reg = <0x01c20058 0x4>;
|
|
clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;
|
|
clock-output-names = "apb2";
|
|
};
|
|
|
|
apb2_gates: clk@01c2006c {
|
|
#clock-cells = <1>;
|
|
compatible = "allwinner,sun8i-a23-apb2-gates-clk";
|
|
reg = <0x01c2006c 0x4>;
|
|
clocks = <&apb2>;
|
|
clock-indices = <0>, <1>,
|
|
<2>, <16>,
|
|
<17>, <18>,
|
|
<19>, <20>;
|
|
clock-output-names = "apb2_i2c0", "apb2_i2c1",
|
|
"apb2_i2c2", "apb2_uart0",
|
|
"apb2_uart1", "apb2_uart2",
|
|
"apb2_uart3", "apb2_uart4";
|
|
};
|
|
|
|
mmc0_clk: clk@01c20088 {
|
|
#clock-cells = <1>;
|
|
compatible = "allwinner,sun4i-a10-mmc-clk";
|
|
reg = <0x01c20088 0x4>;
|
|
clocks = <&osc24M>, <&pll6 0>;
|
|
clock-output-names = "mmc0",
|
|
"mmc0_output",
|
|
"mmc0_sample";
|
|
};
|
|
|
|
mmc1_clk: clk@01c2008c {
|
|
#clock-cells = <1>;
|
|
compatible = "allwinner,sun4i-a10-mmc-clk";
|
|
reg = <0x01c2008c 0x4>;
|
|
clocks = <&osc24M>, <&pll6 0>;
|
|
clock-output-names = "mmc1",
|
|
"mmc1_output",
|
|
"mmc1_sample";
|
|
};
|
|
|
|
mmc2_clk: clk@01c20090 {
|
|
#clock-cells = <1>;
|
|
compatible = "allwinner,sun4i-a10-mmc-clk";
|
|
reg = <0x01c20090 0x4>;
|
|
clocks = <&osc24M>, <&pll6 0>;
|
|
clock-output-names = "mmc2",
|
|
"mmc2_output",
|
|
"mmc2_sample";
|
|
};
|
|
|
|
usb_clk: clk@01c200cc {
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
compatible = "allwinner,sun8i-a23-usb-clk";
|
|
reg = <0x01c200cc 0x4>;
|
|
clocks = <&osc24M>;
|
|
clock-output-names = "usb_phy0", "usb_phy1", "usb_hsic",
|
|
"usb_hsic_12M", "usb_ohci0";
|
|
};
|
|
};
|
|
|
|
soc@01c00000 {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
dma: dma-controller@01c02000 {
|
|
compatible = "allwinner,sun8i-a23-dma";
|
|
reg = <0x01c02000 0x1000>;
|
|
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ahb1_gates 6>;
|
|
resets = <&ahb1_rst 6>;
|
|
#dma-cells = <1>;
|
|
};
|
|
|
|
mmc0: mmc@01c0f000 {
|
|
compatible = "allwinner,sun5i-a13-mmc";
|
|
reg = <0x01c0f000 0x1000>;
|
|
clocks = <&ahb1_gates 8>,
|
|
<&mmc0_clk 0>,
|
|
<&mmc0_clk 1>,
|
|
<&mmc0_clk 2>;
|
|
clock-names = "ahb",
|
|
"mmc",
|
|
"output",
|
|
"sample";
|
|
resets = <&ahb1_rst 8>;
|
|
reset-names = "ahb";
|
|
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
mmc1: mmc@01c10000 {
|
|
compatible = "allwinner,sun5i-a13-mmc";
|
|
reg = <0x01c10000 0x1000>;
|
|
clocks = <&ahb1_gates 9>,
|
|
<&mmc1_clk 0>,
|
|
<&mmc1_clk 1>,
|
|
<&mmc1_clk 2>;
|
|
clock-names = "ahb",
|
|
"mmc",
|
|
"output",
|
|
"sample";
|
|
resets = <&ahb1_rst 9>;
|
|
reset-names = "ahb";
|
|
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
mmc2: mmc@01c11000 {
|
|
compatible = "allwinner,sun5i-a13-mmc";
|
|
reg = <0x01c11000 0x1000>;
|
|
clocks = <&ahb1_gates 10>,
|
|
<&mmc2_clk 0>,
|
|
<&mmc2_clk 1>,
|
|
<&mmc2_clk 2>;
|
|
clock-names = "ahb",
|
|
"mmc",
|
|
"output",
|
|
"sample";
|
|
resets = <&ahb1_rst 10>;
|
|
reset-names = "ahb";
|
|
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
ehci0: usb@01c1a000 {
|
|
compatible = "allwinner,sun8i-a23-ehci", "generic-ehci";
|
|
reg = <0x01c1a000 0x100>;
|
|
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ahb1_gates 26>;
|
|
resets = <&ahb1_rst 26>;
|
|
phys = <&usbphy 1>;
|
|
phy-names = "usb";
|
|
status = "disabled";
|
|
};
|
|
|
|
ohci0: usb@01c1a400 {
|
|
compatible = "allwinner,sun8i-a23-ohci", "generic-ohci";
|
|
reg = <0x01c1a400 0x100>;
|
|
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ahb1_gates 29>, <&usb_clk 16>;
|
|
resets = <&ahb1_rst 29>;
|
|
phys = <&usbphy 1>;
|
|
phy-names = "usb";
|
|
status = "disabled";
|
|
};
|
|
|
|
pio: pinctrl@01c20800 {
|
|
/* compatible gets set in SoC specific dtsi file */
|
|
reg = <0x01c20800 0x400>;
|
|
/* interrupts get set in SoC specific dtsi file */
|
|
clocks = <&apb1_gates 5>;
|
|
gpio-controller;
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
#gpio-cells = <3>;
|
|
|
|
uart0_pins_a: uart0@0 {
|
|
allwinner,pins = "PF2", "PF4";
|
|
allwinner,function = "uart0";
|
|
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
|
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
|
|
};
|
|
|
|
mmc0_pins_a: mmc0@0 {
|
|
allwinner,pins = "PF0", "PF1", "PF2",
|
|
"PF3", "PF4", "PF5";
|
|
allwinner,function = "mmc0";
|
|
allwinner,drive = <SUN4I_PINCTRL_30_MA>;
|
|
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
|
|
};
|
|
|
|
mmc1_pins_a: mmc1@0 {
|
|
allwinner,pins = "PG0", "PG1", "PG2",
|
|
"PG3", "PG4", "PG5";
|
|
allwinner,function = "mmc1";
|
|
allwinner,drive = <SUN4I_PINCTRL_30_MA>;
|
|
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
|
|
};
|
|
|
|
mmc2_8bit_pins: mmc2_8bit {
|
|
allwinner,pins = "PC5", "PC6", "PC8",
|
|
"PC9", "PC10", "PC11",
|
|
"PC12", "PC13", "PC14",
|
|
"PC15";
|
|
allwinner,function = "mmc2";
|
|
allwinner,drive = <SUN4I_PINCTRL_30_MA>;
|
|
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
|
|
};
|
|
|
|
pwm0_pins: pwm0 {
|
|
allwinner,pins = "PH0";
|
|
allwinner,function = "pwm0";
|
|
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
|
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
|
|
};
|
|
|
|
i2c0_pins_a: i2c0@0 {
|
|
allwinner,pins = "PH2", "PH3";
|
|
allwinner,function = "i2c0";
|
|
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
|
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
|
|
};
|
|
|
|
i2c1_pins_a: i2c1@0 {
|
|
allwinner,pins = "PH4", "PH5";
|
|
allwinner,function = "i2c1";
|
|
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
|
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
|
|
};
|
|
|
|
i2c2_pins_a: i2c2@0 {
|
|
allwinner,pins = "PE12", "PE13";
|
|
allwinner,function = "i2c2";
|
|
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
|
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
|
|
};
|
|
};
|
|
|
|
ahb1_rst: reset@01c202c0 {
|
|
#reset-cells = <1>;
|
|
compatible = "allwinner,sun6i-a31-clock-reset";
|
|
reg = <0x01c202c0 0xc>;
|
|
};
|
|
|
|
apb1_rst: reset@01c202d0 {
|
|
#reset-cells = <1>;
|
|
compatible = "allwinner,sun6i-a31-clock-reset";
|
|
reg = <0x01c202d0 0x4>;
|
|
};
|
|
|
|
apb2_rst: reset@01c202d8 {
|
|
#reset-cells = <1>;
|
|
compatible = "allwinner,sun6i-a31-clock-reset";
|
|
reg = <0x01c202d8 0x4>;
|
|
};
|
|
|
|
timer@01c20c00 {
|
|
compatible = "allwinner,sun4i-a10-timer";
|
|
reg = <0x01c20c00 0xa0>;
|
|
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&osc24M>;
|
|
};
|
|
|
|
wdt0: watchdog@01c20ca0 {
|
|
compatible = "allwinner,sun6i-a31-wdt";
|
|
reg = <0x01c20ca0 0x20>;
|
|
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
pwm: pwm@01c21400 {
|
|
compatible = "allwinner,sun7i-a20-pwm";
|
|
reg = <0x01c21400 0xc>;
|
|
clocks = <&osc24M>;
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
lradc: lradc@01c22800 {
|
|
compatible = "allwinner,sun4i-a10-lradc-keys";
|
|
reg = <0x01c22800 0x100>;
|
|
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart0: serial@01c28000 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c28000 0x400>;
|
|
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&apb2_gates 16>;
|
|
resets = <&apb2_rst 16>;
|
|
dmas = <&dma 6>, <&dma 6>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: serial@01c28400 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c28400 0x400>;
|
|
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&apb2_gates 17>;
|
|
resets = <&apb2_rst 17>;
|
|
dmas = <&dma 7>, <&dma 7>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart2: serial@01c28800 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c28800 0x400>;
|
|
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&apb2_gates 18>;
|
|
resets = <&apb2_rst 18>;
|
|
dmas = <&dma 8>, <&dma 8>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart3: serial@01c28c00 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c28c00 0x400>;
|
|
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&apb2_gates 19>;
|
|
resets = <&apb2_rst 19>;
|
|
dmas = <&dma 9>, <&dma 9>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart4: serial@01c29000 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c29000 0x400>;
|
|
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&apb2_gates 20>;
|
|
resets = <&apb2_rst 20>;
|
|
dmas = <&dma 10>, <&dma 10>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c0: i2c@01c2ac00 {
|
|
compatible = "allwinner,sun6i-a31-i2c";
|
|
reg = <0x01c2ac00 0x400>;
|
|
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&apb2_gates 0>;
|
|
resets = <&apb2_rst 0>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
i2c1: i2c@01c2b000 {
|
|
compatible = "allwinner,sun6i-a31-i2c";
|
|
reg = <0x01c2b000 0x400>;
|
|
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&apb2_gates 1>;
|
|
resets = <&apb2_rst 1>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
i2c2: i2c@01c2b400 {
|
|
compatible = "allwinner,sun6i-a31-i2c";
|
|
reg = <0x01c2b400 0x400>;
|
|
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&apb2_gates 2>;
|
|
resets = <&apb2_rst 2>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
gic: interrupt-controller@01c81000 {
|
|
compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
|
|
reg = <0x01c81000 0x1000>,
|
|
<0x01c82000 0x1000>,
|
|
<0x01c84000 0x2000>,
|
|
<0x01c86000 0x2000>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
|
|
};
|
|
|
|
rtc: rtc@01f00000 {
|
|
compatible = "allwinner,sun6i-a31-rtc";
|
|
reg = <0x01f00000 0x54>;
|
|
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
nmi_intc: interrupt-controller@01f00c0c {
|
|
compatible = "allwinner,sun6i-a31-sc-nmi";
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x01f00c0c 0x38>;
|
|
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
prcm@01f01400 {
|
|
compatible = "allwinner,sun8i-a23-prcm";
|
|
reg = <0x01f01400 0x200>;
|
|
|
|
ar100: ar100_clk {
|
|
compatible = "fixed-factor-clock";
|
|
#clock-cells = <0>;
|
|
clock-div = <1>;
|
|
clock-mult = <1>;
|
|
clocks = <&osc24M>;
|
|
clock-output-names = "ar100";
|
|
};
|
|
|
|
ahb0: ahb0_clk {
|
|
compatible = "fixed-factor-clock";
|
|
#clock-cells = <0>;
|
|
clock-div = <1>;
|
|
clock-mult = <1>;
|
|
clocks = <&ar100>;
|
|
clock-output-names = "ahb0";
|
|
};
|
|
|
|
apb0: apb0_clk {
|
|
compatible = "allwinner,sun8i-a23-apb0-clk";
|
|
#clock-cells = <0>;
|
|
clocks = <&ahb0>;
|
|
clock-output-names = "apb0";
|
|
};
|
|
|
|
apb0_gates: apb0_gates_clk {
|
|
compatible = "allwinner,sun8i-a23-apb0-gates-clk";
|
|
#clock-cells = <1>;
|
|
clocks = <&apb0>;
|
|
clock-output-names = "apb0_pio", "apb0_timer",
|
|
"apb0_rsb", "apb0_uart",
|
|
"apb0_i2c";
|
|
};
|
|
|
|
apb0_rst: apb0_rst {
|
|
compatible = "allwinner,sun6i-a31-clock-reset";
|
|
#reset-cells = <1>;
|
|
};
|
|
};
|
|
|
|
cpucfg@01f01c00 {
|
|
compatible = "allwinner,sun8i-a23-cpuconfig";
|
|
reg = <0x01f01c00 0x300>;
|
|
};
|
|
|
|
r_uart: serial@01f02800 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01f02800 0x400>;
|
|
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&apb0_gates 4>;
|
|
resets = <&apb0_rst 4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
r_pio: pinctrl@01f02c00 {
|
|
compatible = "allwinner,sun8i-a23-r-pinctrl";
|
|
reg = <0x01f02c00 0x400>;
|
|
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&apb0_gates 0>;
|
|
resets = <&apb0_rst 0>;
|
|
gpio-controller;
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
#gpio-cells = <3>;
|
|
|
|
r_rsb_pins: r_rsb {
|
|
allwinner,pins = "PL0", "PL1";
|
|
allwinner,function = "s_rsb";
|
|
allwinner,drive = <SUN4I_PINCTRL_20_MA>;
|
|
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
|
|
};
|
|
|
|
r_uart_pins_a: r_uart@0 {
|
|
allwinner,pins = "PL2", "PL3";
|
|
allwinner,function = "s_uart";
|
|
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
|
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
|
|
};
|
|
};
|
|
|
|
r_rsb: rsb@01f03400 {
|
|
compatible = "allwinner,sun8i-a23-rsb";
|
|
reg = <0x01f03400 0x400>;
|
|
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&apb0_gates 3>;
|
|
clock-frequency = <3000000>;
|
|
resets = <&apb0_rst 3>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&r_rsb_pins>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
};
|