mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-17 01:04:19 +08:00
6f3125ceb6
The SDMA hardware/driver does not actually report the transfer residue at burst size granularity, but in fact is only able to report residue after each finished segment. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
1907 lines
49 KiB
C
1907 lines
49 KiB
C
/*
|
|
* drivers/dma/imx-sdma.c
|
|
*
|
|
* This file contains a driver for the Freescale Smart DMA engine
|
|
*
|
|
* Copyright 2010 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
|
|
*
|
|
* Based on code from Freescale:
|
|
*
|
|
* Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved.
|
|
*
|
|
* The code contained herein is licensed under the GNU General Public
|
|
* License. You may obtain a copy of the GNU General Public License
|
|
* Version 2 or later at the following locations:
|
|
*
|
|
* http://www.opensource.org/licenses/gpl-license.html
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/semaphore.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/device.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/firmware.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/dmaengine.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_dma.h>
|
|
|
|
#include <asm/irq.h>
|
|
#include <linux/platform_data/dma-imx-sdma.h>
|
|
#include <linux/platform_data/dma-imx.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
|
|
|
|
#include "dmaengine.h"
|
|
|
|
/* SDMA registers */
|
|
#define SDMA_H_C0PTR 0x000
|
|
#define SDMA_H_INTR 0x004
|
|
#define SDMA_H_STATSTOP 0x008
|
|
#define SDMA_H_START 0x00c
|
|
#define SDMA_H_EVTOVR 0x010
|
|
#define SDMA_H_DSPOVR 0x014
|
|
#define SDMA_H_HOSTOVR 0x018
|
|
#define SDMA_H_EVTPEND 0x01c
|
|
#define SDMA_H_DSPENBL 0x020
|
|
#define SDMA_H_RESET 0x024
|
|
#define SDMA_H_EVTERR 0x028
|
|
#define SDMA_H_INTRMSK 0x02c
|
|
#define SDMA_H_PSW 0x030
|
|
#define SDMA_H_EVTERRDBG 0x034
|
|
#define SDMA_H_CONFIG 0x038
|
|
#define SDMA_ONCE_ENB 0x040
|
|
#define SDMA_ONCE_DATA 0x044
|
|
#define SDMA_ONCE_INSTR 0x048
|
|
#define SDMA_ONCE_STAT 0x04c
|
|
#define SDMA_ONCE_CMD 0x050
|
|
#define SDMA_EVT_MIRROR 0x054
|
|
#define SDMA_ILLINSTADDR 0x058
|
|
#define SDMA_CHN0ADDR 0x05c
|
|
#define SDMA_ONCE_RTB 0x060
|
|
#define SDMA_XTRIG_CONF1 0x070
|
|
#define SDMA_XTRIG_CONF2 0x074
|
|
#define SDMA_CHNENBL0_IMX35 0x200
|
|
#define SDMA_CHNENBL0_IMX31 0x080
|
|
#define SDMA_CHNPRI_0 0x100
|
|
|
|
/*
|
|
* Buffer descriptor status values.
|
|
*/
|
|
#define BD_DONE 0x01
|
|
#define BD_WRAP 0x02
|
|
#define BD_CONT 0x04
|
|
#define BD_INTR 0x08
|
|
#define BD_RROR 0x10
|
|
#define BD_LAST 0x20
|
|
#define BD_EXTD 0x80
|
|
|
|
/*
|
|
* Data Node descriptor status values.
|
|
*/
|
|
#define DND_END_OF_FRAME 0x80
|
|
#define DND_END_OF_XFER 0x40
|
|
#define DND_DONE 0x20
|
|
#define DND_UNUSED 0x01
|
|
|
|
/*
|
|
* IPCV2 descriptor status values.
|
|
*/
|
|
#define BD_IPCV2_END_OF_FRAME 0x40
|
|
|
|
#define IPCV2_MAX_NODES 50
|
|
/*
|
|
* Error bit set in the CCB status field by the SDMA,
|
|
* in setbd routine, in case of a transfer error
|
|
*/
|
|
#define DATA_ERROR 0x10000000
|
|
|
|
/*
|
|
* Buffer descriptor commands.
|
|
*/
|
|
#define C0_ADDR 0x01
|
|
#define C0_LOAD 0x02
|
|
#define C0_DUMP 0x03
|
|
#define C0_SETCTX 0x07
|
|
#define C0_GETCTX 0x03
|
|
#define C0_SETDM 0x01
|
|
#define C0_SETPM 0x04
|
|
#define C0_GETDM 0x02
|
|
#define C0_GETPM 0x08
|
|
/*
|
|
* Change endianness indicator in the BD command field
|
|
*/
|
|
#define CHANGE_ENDIANNESS 0x80
|
|
|
|
/*
|
|
* p_2_p watermark_level description
|
|
* Bits Name Description
|
|
* 0-7 Lower WML Lower watermark level
|
|
* 8 PS 1: Pad Swallowing
|
|
* 0: No Pad Swallowing
|
|
* 9 PA 1: Pad Adding
|
|
* 0: No Pad Adding
|
|
* 10 SPDIF If this bit is set both source
|
|
* and destination are on SPBA
|
|
* 11 Source Bit(SP) 1: Source on SPBA
|
|
* 0: Source on AIPS
|
|
* 12 Destination Bit(DP) 1: Destination on SPBA
|
|
* 0: Destination on AIPS
|
|
* 13-15 --------- MUST BE 0
|
|
* 16-23 Higher WML HWML
|
|
* 24-27 N Total number of samples after
|
|
* which Pad adding/Swallowing
|
|
* must be done. It must be odd.
|
|
* 28 Lower WML Event(LWE) SDMA events reg to check for
|
|
* LWML event mask
|
|
* 0: LWE in EVENTS register
|
|
* 1: LWE in EVENTS2 register
|
|
* 29 Higher WML Event(HWE) SDMA events reg to check for
|
|
* HWML event mask
|
|
* 0: HWE in EVENTS register
|
|
* 1: HWE in EVENTS2 register
|
|
* 30 --------- MUST BE 0
|
|
* 31 CONT 1: Amount of samples to be
|
|
* transferred is unknown and
|
|
* script will keep on
|
|
* transferring samples as long as
|
|
* both events are detected and
|
|
* script must be manually stopped
|
|
* by the application
|
|
* 0: The amount of samples to be
|
|
* transferred is equal to the
|
|
* count field of mode word
|
|
*/
|
|
#define SDMA_WATERMARK_LEVEL_LWML 0xFF
|
|
#define SDMA_WATERMARK_LEVEL_PS BIT(8)
|
|
#define SDMA_WATERMARK_LEVEL_PA BIT(9)
|
|
#define SDMA_WATERMARK_LEVEL_SPDIF BIT(10)
|
|
#define SDMA_WATERMARK_LEVEL_SP BIT(11)
|
|
#define SDMA_WATERMARK_LEVEL_DP BIT(12)
|
|
#define SDMA_WATERMARK_LEVEL_HWML (0xFF << 16)
|
|
#define SDMA_WATERMARK_LEVEL_LWE BIT(28)
|
|
#define SDMA_WATERMARK_LEVEL_HWE BIT(29)
|
|
#define SDMA_WATERMARK_LEVEL_CONT BIT(31)
|
|
|
|
/*
|
|
* Mode/Count of data node descriptors - IPCv2
|
|
*/
|
|
struct sdma_mode_count {
|
|
u32 count : 16; /* size of the buffer pointed by this BD */
|
|
u32 status : 8; /* E,R,I,C,W,D status bits stored here */
|
|
u32 command : 8; /* command mostly used for channel 0 */
|
|
};
|
|
|
|
/*
|
|
* Buffer descriptor
|
|
*/
|
|
struct sdma_buffer_descriptor {
|
|
struct sdma_mode_count mode;
|
|
u32 buffer_addr; /* address of the buffer described */
|
|
u32 ext_buffer_addr; /* extended buffer address */
|
|
} __attribute__ ((packed));
|
|
|
|
/**
|
|
* struct sdma_channel_control - Channel control Block
|
|
*
|
|
* @current_bd_ptr current buffer descriptor processed
|
|
* @base_bd_ptr first element of buffer descriptor array
|
|
* @unused padding. The SDMA engine expects an array of 128 byte
|
|
* control blocks
|
|
*/
|
|
struct sdma_channel_control {
|
|
u32 current_bd_ptr;
|
|
u32 base_bd_ptr;
|
|
u32 unused[2];
|
|
} __attribute__ ((packed));
|
|
|
|
/**
|
|
* struct sdma_state_registers - SDMA context for a channel
|
|
*
|
|
* @pc: program counter
|
|
* @t: test bit: status of arithmetic & test instruction
|
|
* @rpc: return program counter
|
|
* @sf: source fault while loading data
|
|
* @spc: loop start program counter
|
|
* @df: destination fault while storing data
|
|
* @epc: loop end program counter
|
|
* @lm: loop mode
|
|
*/
|
|
struct sdma_state_registers {
|
|
u32 pc :14;
|
|
u32 unused1: 1;
|
|
u32 t : 1;
|
|
u32 rpc :14;
|
|
u32 unused0: 1;
|
|
u32 sf : 1;
|
|
u32 spc :14;
|
|
u32 unused2: 1;
|
|
u32 df : 1;
|
|
u32 epc :14;
|
|
u32 lm : 2;
|
|
} __attribute__ ((packed));
|
|
|
|
/**
|
|
* struct sdma_context_data - sdma context specific to a channel
|
|
*
|
|
* @channel_state: channel state bits
|
|
* @gReg: general registers
|
|
* @mda: burst dma destination address register
|
|
* @msa: burst dma source address register
|
|
* @ms: burst dma status register
|
|
* @md: burst dma data register
|
|
* @pda: peripheral dma destination address register
|
|
* @psa: peripheral dma source address register
|
|
* @ps: peripheral dma status register
|
|
* @pd: peripheral dma data register
|
|
* @ca: CRC polynomial register
|
|
* @cs: CRC accumulator register
|
|
* @dda: dedicated core destination address register
|
|
* @dsa: dedicated core source address register
|
|
* @ds: dedicated core status register
|
|
* @dd: dedicated core data register
|
|
*/
|
|
struct sdma_context_data {
|
|
struct sdma_state_registers channel_state;
|
|
u32 gReg[8];
|
|
u32 mda;
|
|
u32 msa;
|
|
u32 ms;
|
|
u32 md;
|
|
u32 pda;
|
|
u32 psa;
|
|
u32 ps;
|
|
u32 pd;
|
|
u32 ca;
|
|
u32 cs;
|
|
u32 dda;
|
|
u32 dsa;
|
|
u32 ds;
|
|
u32 dd;
|
|
u32 scratch0;
|
|
u32 scratch1;
|
|
u32 scratch2;
|
|
u32 scratch3;
|
|
u32 scratch4;
|
|
u32 scratch5;
|
|
u32 scratch6;
|
|
u32 scratch7;
|
|
} __attribute__ ((packed));
|
|
|
|
#define NUM_BD (int)(PAGE_SIZE / sizeof(struct sdma_buffer_descriptor))
|
|
|
|
struct sdma_engine;
|
|
|
|
/**
|
|
* struct sdma_channel - housekeeping for a SDMA channel
|
|
*
|
|
* @sdma pointer to the SDMA engine for this channel
|
|
* @channel the channel number, matches dmaengine chan_id + 1
|
|
* @direction transfer type. Needed for setting SDMA script
|
|
* @peripheral_type Peripheral type. Needed for setting SDMA script
|
|
* @event_id0 aka dma request line
|
|
* @event_id1 for channels that use 2 events
|
|
* @word_size peripheral access size
|
|
* @buf_tail ID of the buffer that was processed
|
|
* @buf_ptail ID of the previous buffer that was processed
|
|
* @num_bd max NUM_BD. number of descriptors currently handling
|
|
*/
|
|
struct sdma_channel {
|
|
struct sdma_engine *sdma;
|
|
unsigned int channel;
|
|
enum dma_transfer_direction direction;
|
|
enum sdma_peripheral_type peripheral_type;
|
|
unsigned int event_id0;
|
|
unsigned int event_id1;
|
|
enum dma_slave_buswidth word_size;
|
|
unsigned int buf_tail;
|
|
unsigned int buf_ptail;
|
|
unsigned int num_bd;
|
|
unsigned int period_len;
|
|
struct sdma_buffer_descriptor *bd;
|
|
dma_addr_t bd_phys;
|
|
unsigned int pc_from_device, pc_to_device;
|
|
unsigned int device_to_device;
|
|
unsigned long flags;
|
|
dma_addr_t per_address, per_address2;
|
|
unsigned long event_mask[2];
|
|
unsigned long watermark_level;
|
|
u32 shp_addr, per_addr;
|
|
struct dma_chan chan;
|
|
spinlock_t lock;
|
|
struct dma_async_tx_descriptor desc;
|
|
enum dma_status status;
|
|
unsigned int chn_count;
|
|
unsigned int chn_real_count;
|
|
struct tasklet_struct tasklet;
|
|
struct imx_dma_data data;
|
|
};
|
|
|
|
#define IMX_DMA_SG_LOOP BIT(0)
|
|
|
|
#define MAX_DMA_CHANNELS 32
|
|
#define MXC_SDMA_DEFAULT_PRIORITY 1
|
|
#define MXC_SDMA_MIN_PRIORITY 1
|
|
#define MXC_SDMA_MAX_PRIORITY 7
|
|
|
|
#define SDMA_FIRMWARE_MAGIC 0x414d4453
|
|
|
|
/**
|
|
* struct sdma_firmware_header - Layout of the firmware image
|
|
*
|
|
* @magic "SDMA"
|
|
* @version_major increased whenever layout of struct sdma_script_start_addrs
|
|
* changes.
|
|
* @version_minor firmware minor version (for binary compatible changes)
|
|
* @script_addrs_start offset of struct sdma_script_start_addrs in this image
|
|
* @num_script_addrs Number of script addresses in this image
|
|
* @ram_code_start offset of SDMA ram image in this firmware image
|
|
* @ram_code_size size of SDMA ram image
|
|
* @script_addrs Stores the start address of the SDMA scripts
|
|
* (in SDMA memory space)
|
|
*/
|
|
struct sdma_firmware_header {
|
|
u32 magic;
|
|
u32 version_major;
|
|
u32 version_minor;
|
|
u32 script_addrs_start;
|
|
u32 num_script_addrs;
|
|
u32 ram_code_start;
|
|
u32 ram_code_size;
|
|
};
|
|
|
|
struct sdma_driver_data {
|
|
int chnenbl0;
|
|
int num_events;
|
|
struct sdma_script_start_addrs *script_addrs;
|
|
};
|
|
|
|
struct sdma_engine {
|
|
struct device *dev;
|
|
struct device_dma_parameters dma_parms;
|
|
struct sdma_channel channel[MAX_DMA_CHANNELS];
|
|
struct sdma_channel_control *channel_control;
|
|
void __iomem *regs;
|
|
struct sdma_context_data *context;
|
|
dma_addr_t context_phys;
|
|
struct dma_device dma_device;
|
|
struct clk *clk_ipg;
|
|
struct clk *clk_ahb;
|
|
spinlock_t channel_0_lock;
|
|
u32 script_number;
|
|
struct sdma_script_start_addrs *script_addrs;
|
|
const struct sdma_driver_data *drvdata;
|
|
u32 spba_start_addr;
|
|
u32 spba_end_addr;
|
|
unsigned int irq;
|
|
};
|
|
|
|
static struct sdma_driver_data sdma_imx31 = {
|
|
.chnenbl0 = SDMA_CHNENBL0_IMX31,
|
|
.num_events = 32,
|
|
};
|
|
|
|
static struct sdma_script_start_addrs sdma_script_imx25 = {
|
|
.ap_2_ap_addr = 729,
|
|
.uart_2_mcu_addr = 904,
|
|
.per_2_app_addr = 1255,
|
|
.mcu_2_app_addr = 834,
|
|
.uartsh_2_mcu_addr = 1120,
|
|
.per_2_shp_addr = 1329,
|
|
.mcu_2_shp_addr = 1048,
|
|
.ata_2_mcu_addr = 1560,
|
|
.mcu_2_ata_addr = 1479,
|
|
.app_2_per_addr = 1189,
|
|
.app_2_mcu_addr = 770,
|
|
.shp_2_per_addr = 1407,
|
|
.shp_2_mcu_addr = 979,
|
|
};
|
|
|
|
static struct sdma_driver_data sdma_imx25 = {
|
|
.chnenbl0 = SDMA_CHNENBL0_IMX35,
|
|
.num_events = 48,
|
|
.script_addrs = &sdma_script_imx25,
|
|
};
|
|
|
|
static struct sdma_driver_data sdma_imx35 = {
|
|
.chnenbl0 = SDMA_CHNENBL0_IMX35,
|
|
.num_events = 48,
|
|
};
|
|
|
|
static struct sdma_script_start_addrs sdma_script_imx51 = {
|
|
.ap_2_ap_addr = 642,
|
|
.uart_2_mcu_addr = 817,
|
|
.mcu_2_app_addr = 747,
|
|
.mcu_2_shp_addr = 961,
|
|
.ata_2_mcu_addr = 1473,
|
|
.mcu_2_ata_addr = 1392,
|
|
.app_2_per_addr = 1033,
|
|
.app_2_mcu_addr = 683,
|
|
.shp_2_per_addr = 1251,
|
|
.shp_2_mcu_addr = 892,
|
|
};
|
|
|
|
static struct sdma_driver_data sdma_imx51 = {
|
|
.chnenbl0 = SDMA_CHNENBL0_IMX35,
|
|
.num_events = 48,
|
|
.script_addrs = &sdma_script_imx51,
|
|
};
|
|
|
|
static struct sdma_script_start_addrs sdma_script_imx53 = {
|
|
.ap_2_ap_addr = 642,
|
|
.app_2_mcu_addr = 683,
|
|
.mcu_2_app_addr = 747,
|
|
.uart_2_mcu_addr = 817,
|
|
.shp_2_mcu_addr = 891,
|
|
.mcu_2_shp_addr = 960,
|
|
.uartsh_2_mcu_addr = 1032,
|
|
.spdif_2_mcu_addr = 1100,
|
|
.mcu_2_spdif_addr = 1134,
|
|
.firi_2_mcu_addr = 1193,
|
|
.mcu_2_firi_addr = 1290,
|
|
};
|
|
|
|
static struct sdma_driver_data sdma_imx53 = {
|
|
.chnenbl0 = SDMA_CHNENBL0_IMX35,
|
|
.num_events = 48,
|
|
.script_addrs = &sdma_script_imx53,
|
|
};
|
|
|
|
static struct sdma_script_start_addrs sdma_script_imx6q = {
|
|
.ap_2_ap_addr = 642,
|
|
.uart_2_mcu_addr = 817,
|
|
.mcu_2_app_addr = 747,
|
|
.per_2_per_addr = 6331,
|
|
.uartsh_2_mcu_addr = 1032,
|
|
.mcu_2_shp_addr = 960,
|
|
.app_2_mcu_addr = 683,
|
|
.shp_2_mcu_addr = 891,
|
|
.spdif_2_mcu_addr = 1100,
|
|
.mcu_2_spdif_addr = 1134,
|
|
};
|
|
|
|
static struct sdma_driver_data sdma_imx6q = {
|
|
.chnenbl0 = SDMA_CHNENBL0_IMX35,
|
|
.num_events = 48,
|
|
.script_addrs = &sdma_script_imx6q,
|
|
};
|
|
|
|
static struct sdma_script_start_addrs sdma_script_imx7d = {
|
|
.ap_2_ap_addr = 644,
|
|
.uart_2_mcu_addr = 819,
|
|
.mcu_2_app_addr = 749,
|
|
.uartsh_2_mcu_addr = 1034,
|
|
.mcu_2_shp_addr = 962,
|
|
.app_2_mcu_addr = 685,
|
|
.shp_2_mcu_addr = 893,
|
|
.spdif_2_mcu_addr = 1102,
|
|
.mcu_2_spdif_addr = 1136,
|
|
};
|
|
|
|
static struct sdma_driver_data sdma_imx7d = {
|
|
.chnenbl0 = SDMA_CHNENBL0_IMX35,
|
|
.num_events = 48,
|
|
.script_addrs = &sdma_script_imx7d,
|
|
};
|
|
|
|
static const struct platform_device_id sdma_devtypes[] = {
|
|
{
|
|
.name = "imx25-sdma",
|
|
.driver_data = (unsigned long)&sdma_imx25,
|
|
}, {
|
|
.name = "imx31-sdma",
|
|
.driver_data = (unsigned long)&sdma_imx31,
|
|
}, {
|
|
.name = "imx35-sdma",
|
|
.driver_data = (unsigned long)&sdma_imx35,
|
|
}, {
|
|
.name = "imx51-sdma",
|
|
.driver_data = (unsigned long)&sdma_imx51,
|
|
}, {
|
|
.name = "imx53-sdma",
|
|
.driver_data = (unsigned long)&sdma_imx53,
|
|
}, {
|
|
.name = "imx6q-sdma",
|
|
.driver_data = (unsigned long)&sdma_imx6q,
|
|
}, {
|
|
.name = "imx7d-sdma",
|
|
.driver_data = (unsigned long)&sdma_imx7d,
|
|
}, {
|
|
/* sentinel */
|
|
}
|
|
};
|
|
MODULE_DEVICE_TABLE(platform, sdma_devtypes);
|
|
|
|
static const struct of_device_id sdma_dt_ids[] = {
|
|
{ .compatible = "fsl,imx6q-sdma", .data = &sdma_imx6q, },
|
|
{ .compatible = "fsl,imx53-sdma", .data = &sdma_imx53, },
|
|
{ .compatible = "fsl,imx51-sdma", .data = &sdma_imx51, },
|
|
{ .compatible = "fsl,imx35-sdma", .data = &sdma_imx35, },
|
|
{ .compatible = "fsl,imx31-sdma", .data = &sdma_imx31, },
|
|
{ .compatible = "fsl,imx25-sdma", .data = &sdma_imx25, },
|
|
{ .compatible = "fsl,imx7d-sdma", .data = &sdma_imx7d, },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sdma_dt_ids);
|
|
|
|
#define SDMA_H_CONFIG_DSPDMA BIT(12) /* indicates if the DSPDMA is used */
|
|
#define SDMA_H_CONFIG_RTD_PINS BIT(11) /* indicates if Real-Time Debug pins are enabled */
|
|
#define SDMA_H_CONFIG_ACR BIT(4) /* indicates if AHB freq /core freq = 2 or 1 */
|
|
#define SDMA_H_CONFIG_CSM (3) /* indicates which context switch mode is selected*/
|
|
|
|
static inline u32 chnenbl_ofs(struct sdma_engine *sdma, unsigned int event)
|
|
{
|
|
u32 chnenbl0 = sdma->drvdata->chnenbl0;
|
|
return chnenbl0 + event * 4;
|
|
}
|
|
|
|
static int sdma_config_ownership(struct sdma_channel *sdmac,
|
|
bool event_override, bool mcu_override, bool dsp_override)
|
|
{
|
|
struct sdma_engine *sdma = sdmac->sdma;
|
|
int channel = sdmac->channel;
|
|
unsigned long evt, mcu, dsp;
|
|
|
|
if (event_override && mcu_override && dsp_override)
|
|
return -EINVAL;
|
|
|
|
evt = readl_relaxed(sdma->regs + SDMA_H_EVTOVR);
|
|
mcu = readl_relaxed(sdma->regs + SDMA_H_HOSTOVR);
|
|
dsp = readl_relaxed(sdma->regs + SDMA_H_DSPOVR);
|
|
|
|
if (dsp_override)
|
|
__clear_bit(channel, &dsp);
|
|
else
|
|
__set_bit(channel, &dsp);
|
|
|
|
if (event_override)
|
|
__clear_bit(channel, &evt);
|
|
else
|
|
__set_bit(channel, &evt);
|
|
|
|
if (mcu_override)
|
|
__clear_bit(channel, &mcu);
|
|
else
|
|
__set_bit(channel, &mcu);
|
|
|
|
writel_relaxed(evt, sdma->regs + SDMA_H_EVTOVR);
|
|
writel_relaxed(mcu, sdma->regs + SDMA_H_HOSTOVR);
|
|
writel_relaxed(dsp, sdma->regs + SDMA_H_DSPOVR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sdma_enable_channel(struct sdma_engine *sdma, int channel)
|
|
{
|
|
writel(BIT(channel), sdma->regs + SDMA_H_START);
|
|
}
|
|
|
|
/*
|
|
* sdma_run_channel0 - run a channel and wait till it's done
|
|
*/
|
|
static int sdma_run_channel0(struct sdma_engine *sdma)
|
|
{
|
|
int ret;
|
|
u32 reg;
|
|
|
|
sdma_enable_channel(sdma, 0);
|
|
|
|
ret = readl_relaxed_poll_timeout_atomic(sdma->regs + SDMA_H_STATSTOP,
|
|
reg, !(reg & 1), 1, 500);
|
|
if (ret)
|
|
dev_err(sdma->dev, "Timeout waiting for CH0 ready\n");
|
|
|
|
/* Set bits of CONFIG register with dynamic context switching */
|
|
if (readl(sdma->regs + SDMA_H_CONFIG) == 0)
|
|
writel_relaxed(SDMA_H_CONFIG_CSM, sdma->regs + SDMA_H_CONFIG);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sdma_load_script(struct sdma_engine *sdma, void *buf, int size,
|
|
u32 address)
|
|
{
|
|
struct sdma_buffer_descriptor *bd0 = sdma->channel[0].bd;
|
|
void *buf_virt;
|
|
dma_addr_t buf_phys;
|
|
int ret;
|
|
unsigned long flags;
|
|
|
|
buf_virt = dma_alloc_coherent(NULL,
|
|
size,
|
|
&buf_phys, GFP_KERNEL);
|
|
if (!buf_virt) {
|
|
return -ENOMEM;
|
|
}
|
|
|
|
spin_lock_irqsave(&sdma->channel_0_lock, flags);
|
|
|
|
bd0->mode.command = C0_SETPM;
|
|
bd0->mode.status = BD_DONE | BD_INTR | BD_WRAP | BD_EXTD;
|
|
bd0->mode.count = size / 2;
|
|
bd0->buffer_addr = buf_phys;
|
|
bd0->ext_buffer_addr = address;
|
|
|
|
memcpy(buf_virt, buf, size);
|
|
|
|
ret = sdma_run_channel0(sdma);
|
|
|
|
spin_unlock_irqrestore(&sdma->channel_0_lock, flags);
|
|
|
|
dma_free_coherent(NULL, size, buf_virt, buf_phys);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void sdma_event_enable(struct sdma_channel *sdmac, unsigned int event)
|
|
{
|
|
struct sdma_engine *sdma = sdmac->sdma;
|
|
int channel = sdmac->channel;
|
|
unsigned long val;
|
|
u32 chnenbl = chnenbl_ofs(sdma, event);
|
|
|
|
val = readl_relaxed(sdma->regs + chnenbl);
|
|
__set_bit(channel, &val);
|
|
writel_relaxed(val, sdma->regs + chnenbl);
|
|
}
|
|
|
|
static void sdma_event_disable(struct sdma_channel *sdmac, unsigned int event)
|
|
{
|
|
struct sdma_engine *sdma = sdmac->sdma;
|
|
int channel = sdmac->channel;
|
|
u32 chnenbl = chnenbl_ofs(sdma, event);
|
|
unsigned long val;
|
|
|
|
val = readl_relaxed(sdma->regs + chnenbl);
|
|
__clear_bit(channel, &val);
|
|
writel_relaxed(val, sdma->regs + chnenbl);
|
|
}
|
|
|
|
static void sdma_update_channel_loop(struct sdma_channel *sdmac)
|
|
{
|
|
struct sdma_buffer_descriptor *bd;
|
|
int error = 0;
|
|
enum dma_status old_status = sdmac->status;
|
|
|
|
/*
|
|
* loop mode. Iterate over descriptors, re-setup them and
|
|
* call callback function.
|
|
*/
|
|
while (1) {
|
|
bd = &sdmac->bd[sdmac->buf_tail];
|
|
|
|
if (bd->mode.status & BD_DONE)
|
|
break;
|
|
|
|
if (bd->mode.status & BD_RROR) {
|
|
bd->mode.status &= ~BD_RROR;
|
|
sdmac->status = DMA_ERROR;
|
|
error = -EIO;
|
|
}
|
|
|
|
/*
|
|
* We use bd->mode.count to calculate the residue, since contains
|
|
* the number of bytes present in the current buffer descriptor.
|
|
*/
|
|
|
|
sdmac->chn_real_count = bd->mode.count;
|
|
bd->mode.status |= BD_DONE;
|
|
bd->mode.count = sdmac->period_len;
|
|
sdmac->buf_ptail = sdmac->buf_tail;
|
|
sdmac->buf_tail = (sdmac->buf_tail + 1) % sdmac->num_bd;
|
|
|
|
/*
|
|
* The callback is called from the interrupt context in order
|
|
* to reduce latency and to avoid the risk of altering the
|
|
* SDMA transaction status by the time the client tasklet is
|
|
* executed.
|
|
*/
|
|
|
|
dmaengine_desc_get_callback_invoke(&sdmac->desc, NULL);
|
|
|
|
if (error)
|
|
sdmac->status = old_status;
|
|
}
|
|
}
|
|
|
|
static void mxc_sdma_handle_channel_normal(unsigned long data)
|
|
{
|
|
struct sdma_channel *sdmac = (struct sdma_channel *) data;
|
|
struct sdma_buffer_descriptor *bd;
|
|
int i, error = 0;
|
|
|
|
sdmac->chn_real_count = 0;
|
|
/*
|
|
* non loop mode. Iterate over all descriptors, collect
|
|
* errors and call callback function
|
|
*/
|
|
for (i = 0; i < sdmac->num_bd; i++) {
|
|
bd = &sdmac->bd[i];
|
|
|
|
if (bd->mode.status & (BD_DONE | BD_RROR))
|
|
error = -EIO;
|
|
sdmac->chn_real_count += bd->mode.count;
|
|
}
|
|
|
|
if (error)
|
|
sdmac->status = DMA_ERROR;
|
|
else
|
|
sdmac->status = DMA_COMPLETE;
|
|
|
|
dma_cookie_complete(&sdmac->desc);
|
|
|
|
dmaengine_desc_get_callback_invoke(&sdmac->desc, NULL);
|
|
}
|
|
|
|
static irqreturn_t sdma_int_handler(int irq, void *dev_id)
|
|
{
|
|
struct sdma_engine *sdma = dev_id;
|
|
unsigned long stat;
|
|
|
|
stat = readl_relaxed(sdma->regs + SDMA_H_INTR);
|
|
writel_relaxed(stat, sdma->regs + SDMA_H_INTR);
|
|
/* channel 0 is special and not handled here, see run_channel0() */
|
|
stat &= ~1;
|
|
|
|
while (stat) {
|
|
int channel = fls(stat) - 1;
|
|
struct sdma_channel *sdmac = &sdma->channel[channel];
|
|
|
|
if (sdmac->flags & IMX_DMA_SG_LOOP)
|
|
sdma_update_channel_loop(sdmac);
|
|
else
|
|
tasklet_schedule(&sdmac->tasklet);
|
|
|
|
__clear_bit(channel, &stat);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/*
|
|
* sets the pc of SDMA script according to the peripheral type
|
|
*/
|
|
static void sdma_get_pc(struct sdma_channel *sdmac,
|
|
enum sdma_peripheral_type peripheral_type)
|
|
{
|
|
struct sdma_engine *sdma = sdmac->sdma;
|
|
int per_2_emi = 0, emi_2_per = 0;
|
|
/*
|
|
* These are needed once we start to support transfers between
|
|
* two peripherals or memory-to-memory transfers
|
|
*/
|
|
int per_2_per = 0;
|
|
|
|
sdmac->pc_from_device = 0;
|
|
sdmac->pc_to_device = 0;
|
|
sdmac->device_to_device = 0;
|
|
|
|
switch (peripheral_type) {
|
|
case IMX_DMATYPE_MEMORY:
|
|
break;
|
|
case IMX_DMATYPE_DSP:
|
|
emi_2_per = sdma->script_addrs->bp_2_ap_addr;
|
|
per_2_emi = sdma->script_addrs->ap_2_bp_addr;
|
|
break;
|
|
case IMX_DMATYPE_FIRI:
|
|
per_2_emi = sdma->script_addrs->firi_2_mcu_addr;
|
|
emi_2_per = sdma->script_addrs->mcu_2_firi_addr;
|
|
break;
|
|
case IMX_DMATYPE_UART:
|
|
per_2_emi = sdma->script_addrs->uart_2_mcu_addr;
|
|
emi_2_per = sdma->script_addrs->mcu_2_app_addr;
|
|
break;
|
|
case IMX_DMATYPE_UART_SP:
|
|
per_2_emi = sdma->script_addrs->uartsh_2_mcu_addr;
|
|
emi_2_per = sdma->script_addrs->mcu_2_shp_addr;
|
|
break;
|
|
case IMX_DMATYPE_ATA:
|
|
per_2_emi = sdma->script_addrs->ata_2_mcu_addr;
|
|
emi_2_per = sdma->script_addrs->mcu_2_ata_addr;
|
|
break;
|
|
case IMX_DMATYPE_CSPI:
|
|
case IMX_DMATYPE_EXT:
|
|
case IMX_DMATYPE_SSI:
|
|
case IMX_DMATYPE_SAI:
|
|
per_2_emi = sdma->script_addrs->app_2_mcu_addr;
|
|
emi_2_per = sdma->script_addrs->mcu_2_app_addr;
|
|
break;
|
|
case IMX_DMATYPE_SSI_DUAL:
|
|
per_2_emi = sdma->script_addrs->ssish_2_mcu_addr;
|
|
emi_2_per = sdma->script_addrs->mcu_2_ssish_addr;
|
|
break;
|
|
case IMX_DMATYPE_SSI_SP:
|
|
case IMX_DMATYPE_MMC:
|
|
case IMX_DMATYPE_SDHC:
|
|
case IMX_DMATYPE_CSPI_SP:
|
|
case IMX_DMATYPE_ESAI:
|
|
case IMX_DMATYPE_MSHC_SP:
|
|
per_2_emi = sdma->script_addrs->shp_2_mcu_addr;
|
|
emi_2_per = sdma->script_addrs->mcu_2_shp_addr;
|
|
break;
|
|
case IMX_DMATYPE_ASRC:
|
|
per_2_emi = sdma->script_addrs->asrc_2_mcu_addr;
|
|
emi_2_per = sdma->script_addrs->asrc_2_mcu_addr;
|
|
per_2_per = sdma->script_addrs->per_2_per_addr;
|
|
break;
|
|
case IMX_DMATYPE_ASRC_SP:
|
|
per_2_emi = sdma->script_addrs->shp_2_mcu_addr;
|
|
emi_2_per = sdma->script_addrs->mcu_2_shp_addr;
|
|
per_2_per = sdma->script_addrs->per_2_per_addr;
|
|
break;
|
|
case IMX_DMATYPE_MSHC:
|
|
per_2_emi = sdma->script_addrs->mshc_2_mcu_addr;
|
|
emi_2_per = sdma->script_addrs->mcu_2_mshc_addr;
|
|
break;
|
|
case IMX_DMATYPE_CCM:
|
|
per_2_emi = sdma->script_addrs->dptc_dvfs_addr;
|
|
break;
|
|
case IMX_DMATYPE_SPDIF:
|
|
per_2_emi = sdma->script_addrs->spdif_2_mcu_addr;
|
|
emi_2_per = sdma->script_addrs->mcu_2_spdif_addr;
|
|
break;
|
|
case IMX_DMATYPE_IPU_MEMORY:
|
|
emi_2_per = sdma->script_addrs->ext_mem_2_ipu_addr;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
sdmac->pc_from_device = per_2_emi;
|
|
sdmac->pc_to_device = emi_2_per;
|
|
sdmac->device_to_device = per_2_per;
|
|
}
|
|
|
|
static int sdma_load_context(struct sdma_channel *sdmac)
|
|
{
|
|
struct sdma_engine *sdma = sdmac->sdma;
|
|
int channel = sdmac->channel;
|
|
int load_address;
|
|
struct sdma_context_data *context = sdma->context;
|
|
struct sdma_buffer_descriptor *bd0 = sdma->channel[0].bd;
|
|
int ret;
|
|
unsigned long flags;
|
|
|
|
if (sdmac->direction == DMA_DEV_TO_MEM)
|
|
load_address = sdmac->pc_from_device;
|
|
else if (sdmac->direction == DMA_DEV_TO_DEV)
|
|
load_address = sdmac->device_to_device;
|
|
else
|
|
load_address = sdmac->pc_to_device;
|
|
|
|
if (load_address < 0)
|
|
return load_address;
|
|
|
|
dev_dbg(sdma->dev, "load_address = %d\n", load_address);
|
|
dev_dbg(sdma->dev, "wml = 0x%08x\n", (u32)sdmac->watermark_level);
|
|
dev_dbg(sdma->dev, "shp_addr = 0x%08x\n", sdmac->shp_addr);
|
|
dev_dbg(sdma->dev, "per_addr = 0x%08x\n", sdmac->per_addr);
|
|
dev_dbg(sdma->dev, "event_mask0 = 0x%08x\n", (u32)sdmac->event_mask[0]);
|
|
dev_dbg(sdma->dev, "event_mask1 = 0x%08x\n", (u32)sdmac->event_mask[1]);
|
|
|
|
spin_lock_irqsave(&sdma->channel_0_lock, flags);
|
|
|
|
memset(context, 0, sizeof(*context));
|
|
context->channel_state.pc = load_address;
|
|
|
|
/* Send by context the event mask,base address for peripheral
|
|
* and watermark level
|
|
*/
|
|
context->gReg[0] = sdmac->event_mask[1];
|
|
context->gReg[1] = sdmac->event_mask[0];
|
|
context->gReg[2] = sdmac->per_addr;
|
|
context->gReg[6] = sdmac->shp_addr;
|
|
context->gReg[7] = sdmac->watermark_level;
|
|
|
|
bd0->mode.command = C0_SETDM;
|
|
bd0->mode.status = BD_DONE | BD_INTR | BD_WRAP | BD_EXTD;
|
|
bd0->mode.count = sizeof(*context) / 4;
|
|
bd0->buffer_addr = sdma->context_phys;
|
|
bd0->ext_buffer_addr = 2048 + (sizeof(*context) / 4) * channel;
|
|
ret = sdma_run_channel0(sdma);
|
|
|
|
spin_unlock_irqrestore(&sdma->channel_0_lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct sdma_channel *to_sdma_chan(struct dma_chan *chan)
|
|
{
|
|
return container_of(chan, struct sdma_channel, chan);
|
|
}
|
|
|
|
static int sdma_disable_channel(struct dma_chan *chan)
|
|
{
|
|
struct sdma_channel *sdmac = to_sdma_chan(chan);
|
|
struct sdma_engine *sdma = sdmac->sdma;
|
|
int channel = sdmac->channel;
|
|
|
|
writel_relaxed(BIT(channel), sdma->regs + SDMA_H_STATSTOP);
|
|
sdmac->status = DMA_ERROR;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sdma_set_watermarklevel_for_p2p(struct sdma_channel *sdmac)
|
|
{
|
|
struct sdma_engine *sdma = sdmac->sdma;
|
|
|
|
int lwml = sdmac->watermark_level & SDMA_WATERMARK_LEVEL_LWML;
|
|
int hwml = (sdmac->watermark_level & SDMA_WATERMARK_LEVEL_HWML) >> 16;
|
|
|
|
set_bit(sdmac->event_id0 % 32, &sdmac->event_mask[1]);
|
|
set_bit(sdmac->event_id1 % 32, &sdmac->event_mask[0]);
|
|
|
|
if (sdmac->event_id0 > 31)
|
|
sdmac->watermark_level |= SDMA_WATERMARK_LEVEL_LWE;
|
|
|
|
if (sdmac->event_id1 > 31)
|
|
sdmac->watermark_level |= SDMA_WATERMARK_LEVEL_HWE;
|
|
|
|
/*
|
|
* If LWML(src_maxburst) > HWML(dst_maxburst), we need
|
|
* swap LWML and HWML of INFO(A.3.2.5.1), also need swap
|
|
* r0(event_mask[1]) and r1(event_mask[0]).
|
|
*/
|
|
if (lwml > hwml) {
|
|
sdmac->watermark_level &= ~(SDMA_WATERMARK_LEVEL_LWML |
|
|
SDMA_WATERMARK_LEVEL_HWML);
|
|
sdmac->watermark_level |= hwml;
|
|
sdmac->watermark_level |= lwml << 16;
|
|
swap(sdmac->event_mask[0], sdmac->event_mask[1]);
|
|
}
|
|
|
|
if (sdmac->per_address2 >= sdma->spba_start_addr &&
|
|
sdmac->per_address2 <= sdma->spba_end_addr)
|
|
sdmac->watermark_level |= SDMA_WATERMARK_LEVEL_SP;
|
|
|
|
if (sdmac->per_address >= sdma->spba_start_addr &&
|
|
sdmac->per_address <= sdma->spba_end_addr)
|
|
sdmac->watermark_level |= SDMA_WATERMARK_LEVEL_DP;
|
|
|
|
sdmac->watermark_level |= SDMA_WATERMARK_LEVEL_CONT;
|
|
}
|
|
|
|
static int sdma_config_channel(struct dma_chan *chan)
|
|
{
|
|
struct sdma_channel *sdmac = to_sdma_chan(chan);
|
|
int ret;
|
|
|
|
sdma_disable_channel(chan);
|
|
|
|
sdmac->event_mask[0] = 0;
|
|
sdmac->event_mask[1] = 0;
|
|
sdmac->shp_addr = 0;
|
|
sdmac->per_addr = 0;
|
|
|
|
if (sdmac->event_id0) {
|
|
if (sdmac->event_id0 >= sdmac->sdma->drvdata->num_events)
|
|
return -EINVAL;
|
|
sdma_event_enable(sdmac, sdmac->event_id0);
|
|
}
|
|
|
|
if (sdmac->event_id1) {
|
|
if (sdmac->event_id1 >= sdmac->sdma->drvdata->num_events)
|
|
return -EINVAL;
|
|
sdma_event_enable(sdmac, sdmac->event_id1);
|
|
}
|
|
|
|
switch (sdmac->peripheral_type) {
|
|
case IMX_DMATYPE_DSP:
|
|
sdma_config_ownership(sdmac, false, true, true);
|
|
break;
|
|
case IMX_DMATYPE_MEMORY:
|
|
sdma_config_ownership(sdmac, false, true, false);
|
|
break;
|
|
default:
|
|
sdma_config_ownership(sdmac, true, true, false);
|
|
break;
|
|
}
|
|
|
|
sdma_get_pc(sdmac, sdmac->peripheral_type);
|
|
|
|
if ((sdmac->peripheral_type != IMX_DMATYPE_MEMORY) &&
|
|
(sdmac->peripheral_type != IMX_DMATYPE_DSP)) {
|
|
/* Handle multiple event channels differently */
|
|
if (sdmac->event_id1) {
|
|
if (sdmac->peripheral_type == IMX_DMATYPE_ASRC_SP ||
|
|
sdmac->peripheral_type == IMX_DMATYPE_ASRC)
|
|
sdma_set_watermarklevel_for_p2p(sdmac);
|
|
} else
|
|
__set_bit(sdmac->event_id0, sdmac->event_mask);
|
|
|
|
/* Address */
|
|
sdmac->shp_addr = sdmac->per_address;
|
|
sdmac->per_addr = sdmac->per_address2;
|
|
} else {
|
|
sdmac->watermark_level = 0; /* FIXME: M3_BASE_ADDRESS */
|
|
}
|
|
|
|
ret = sdma_load_context(sdmac);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sdma_set_channel_priority(struct sdma_channel *sdmac,
|
|
unsigned int priority)
|
|
{
|
|
struct sdma_engine *sdma = sdmac->sdma;
|
|
int channel = sdmac->channel;
|
|
|
|
if (priority < MXC_SDMA_MIN_PRIORITY
|
|
|| priority > MXC_SDMA_MAX_PRIORITY) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
writel_relaxed(priority, sdma->regs + SDMA_CHNPRI_0 + 4 * channel);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sdma_request_channel(struct sdma_channel *sdmac)
|
|
{
|
|
struct sdma_engine *sdma = sdmac->sdma;
|
|
int channel = sdmac->channel;
|
|
int ret = -EBUSY;
|
|
|
|
sdmac->bd = dma_zalloc_coherent(NULL, PAGE_SIZE, &sdmac->bd_phys,
|
|
GFP_KERNEL);
|
|
if (!sdmac->bd) {
|
|
ret = -ENOMEM;
|
|
goto out;
|
|
}
|
|
|
|
sdma->channel_control[channel].base_bd_ptr = sdmac->bd_phys;
|
|
sdma->channel_control[channel].current_bd_ptr = sdmac->bd_phys;
|
|
|
|
sdma_set_channel_priority(sdmac, MXC_SDMA_DEFAULT_PRIORITY);
|
|
return 0;
|
|
out:
|
|
|
|
return ret;
|
|
}
|
|
|
|
static dma_cookie_t sdma_tx_submit(struct dma_async_tx_descriptor *tx)
|
|
{
|
|
unsigned long flags;
|
|
struct sdma_channel *sdmac = to_sdma_chan(tx->chan);
|
|
dma_cookie_t cookie;
|
|
|
|
spin_lock_irqsave(&sdmac->lock, flags);
|
|
|
|
cookie = dma_cookie_assign(tx);
|
|
|
|
spin_unlock_irqrestore(&sdmac->lock, flags);
|
|
|
|
return cookie;
|
|
}
|
|
|
|
static int sdma_alloc_chan_resources(struct dma_chan *chan)
|
|
{
|
|
struct sdma_channel *sdmac = to_sdma_chan(chan);
|
|
struct imx_dma_data *data = chan->private;
|
|
int prio, ret;
|
|
|
|
if (!data)
|
|
return -EINVAL;
|
|
|
|
switch (data->priority) {
|
|
case DMA_PRIO_HIGH:
|
|
prio = 3;
|
|
break;
|
|
case DMA_PRIO_MEDIUM:
|
|
prio = 2;
|
|
break;
|
|
case DMA_PRIO_LOW:
|
|
default:
|
|
prio = 1;
|
|
break;
|
|
}
|
|
|
|
sdmac->peripheral_type = data->peripheral_type;
|
|
sdmac->event_id0 = data->dma_request;
|
|
sdmac->event_id1 = data->dma_request2;
|
|
|
|
ret = clk_enable(sdmac->sdma->clk_ipg);
|
|
if (ret)
|
|
return ret;
|
|
ret = clk_enable(sdmac->sdma->clk_ahb);
|
|
if (ret)
|
|
goto disable_clk_ipg;
|
|
|
|
ret = sdma_request_channel(sdmac);
|
|
if (ret)
|
|
goto disable_clk_ahb;
|
|
|
|
ret = sdma_set_channel_priority(sdmac, prio);
|
|
if (ret)
|
|
goto disable_clk_ahb;
|
|
|
|
dma_async_tx_descriptor_init(&sdmac->desc, chan);
|
|
sdmac->desc.tx_submit = sdma_tx_submit;
|
|
/* txd.flags will be overwritten in prep funcs */
|
|
sdmac->desc.flags = DMA_CTRL_ACK;
|
|
|
|
return 0;
|
|
|
|
disable_clk_ahb:
|
|
clk_disable(sdmac->sdma->clk_ahb);
|
|
disable_clk_ipg:
|
|
clk_disable(sdmac->sdma->clk_ipg);
|
|
return ret;
|
|
}
|
|
|
|
static void sdma_free_chan_resources(struct dma_chan *chan)
|
|
{
|
|
struct sdma_channel *sdmac = to_sdma_chan(chan);
|
|
struct sdma_engine *sdma = sdmac->sdma;
|
|
|
|
sdma_disable_channel(chan);
|
|
|
|
if (sdmac->event_id0)
|
|
sdma_event_disable(sdmac, sdmac->event_id0);
|
|
if (sdmac->event_id1)
|
|
sdma_event_disable(sdmac, sdmac->event_id1);
|
|
|
|
sdmac->event_id0 = 0;
|
|
sdmac->event_id1 = 0;
|
|
|
|
sdma_set_channel_priority(sdmac, 0);
|
|
|
|
dma_free_coherent(NULL, PAGE_SIZE, sdmac->bd, sdmac->bd_phys);
|
|
|
|
clk_disable(sdma->clk_ipg);
|
|
clk_disable(sdma->clk_ahb);
|
|
}
|
|
|
|
static struct dma_async_tx_descriptor *sdma_prep_slave_sg(
|
|
struct dma_chan *chan, struct scatterlist *sgl,
|
|
unsigned int sg_len, enum dma_transfer_direction direction,
|
|
unsigned long flags, void *context)
|
|
{
|
|
struct sdma_channel *sdmac = to_sdma_chan(chan);
|
|
struct sdma_engine *sdma = sdmac->sdma;
|
|
int ret, i, count;
|
|
int channel = sdmac->channel;
|
|
struct scatterlist *sg;
|
|
|
|
if (sdmac->status == DMA_IN_PROGRESS)
|
|
return NULL;
|
|
sdmac->status = DMA_IN_PROGRESS;
|
|
|
|
sdmac->flags = 0;
|
|
|
|
sdmac->buf_tail = 0;
|
|
sdmac->buf_ptail = 0;
|
|
sdmac->chn_real_count = 0;
|
|
|
|
dev_dbg(sdma->dev, "setting up %d entries for channel %d.\n",
|
|
sg_len, channel);
|
|
|
|
sdmac->direction = direction;
|
|
ret = sdma_load_context(sdmac);
|
|
if (ret)
|
|
goto err_out;
|
|
|
|
if (sg_len > NUM_BD) {
|
|
dev_err(sdma->dev, "SDMA channel %d: maximum number of sg exceeded: %d > %d\n",
|
|
channel, sg_len, NUM_BD);
|
|
ret = -EINVAL;
|
|
goto err_out;
|
|
}
|
|
|
|
sdmac->chn_count = 0;
|
|
for_each_sg(sgl, sg, sg_len, i) {
|
|
struct sdma_buffer_descriptor *bd = &sdmac->bd[i];
|
|
int param;
|
|
|
|
bd->buffer_addr = sg->dma_address;
|
|
|
|
count = sg_dma_len(sg);
|
|
|
|
if (count > 0xffff) {
|
|
dev_err(sdma->dev, "SDMA channel %d: maximum bytes for sg entry exceeded: %d > %d\n",
|
|
channel, count, 0xffff);
|
|
ret = -EINVAL;
|
|
goto err_out;
|
|
}
|
|
|
|
bd->mode.count = count;
|
|
sdmac->chn_count += count;
|
|
|
|
if (sdmac->word_size > DMA_SLAVE_BUSWIDTH_4_BYTES) {
|
|
ret = -EINVAL;
|
|
goto err_out;
|
|
}
|
|
|
|
switch (sdmac->word_size) {
|
|
case DMA_SLAVE_BUSWIDTH_4_BYTES:
|
|
bd->mode.command = 0;
|
|
if (count & 3 || sg->dma_address & 3)
|
|
return NULL;
|
|
break;
|
|
case DMA_SLAVE_BUSWIDTH_2_BYTES:
|
|
bd->mode.command = 2;
|
|
if (count & 1 || sg->dma_address & 1)
|
|
return NULL;
|
|
break;
|
|
case DMA_SLAVE_BUSWIDTH_1_BYTE:
|
|
bd->mode.command = 1;
|
|
break;
|
|
default:
|
|
return NULL;
|
|
}
|
|
|
|
param = BD_DONE | BD_EXTD | BD_CONT;
|
|
|
|
if (i + 1 == sg_len) {
|
|
param |= BD_INTR;
|
|
param |= BD_LAST;
|
|
param &= ~BD_CONT;
|
|
}
|
|
|
|
dev_dbg(sdma->dev, "entry %d: count: %d dma: %#llx %s%s\n",
|
|
i, count, (u64)sg->dma_address,
|
|
param & BD_WRAP ? "wrap" : "",
|
|
param & BD_INTR ? " intr" : "");
|
|
|
|
bd->mode.status = param;
|
|
}
|
|
|
|
sdmac->num_bd = sg_len;
|
|
sdma->channel_control[channel].current_bd_ptr = sdmac->bd_phys;
|
|
|
|
return &sdmac->desc;
|
|
err_out:
|
|
sdmac->status = DMA_ERROR;
|
|
return NULL;
|
|
}
|
|
|
|
static struct dma_async_tx_descriptor *sdma_prep_dma_cyclic(
|
|
struct dma_chan *chan, dma_addr_t dma_addr, size_t buf_len,
|
|
size_t period_len, enum dma_transfer_direction direction,
|
|
unsigned long flags)
|
|
{
|
|
struct sdma_channel *sdmac = to_sdma_chan(chan);
|
|
struct sdma_engine *sdma = sdmac->sdma;
|
|
int num_periods = buf_len / period_len;
|
|
int channel = sdmac->channel;
|
|
int ret, i = 0, buf = 0;
|
|
|
|
dev_dbg(sdma->dev, "%s channel: %d\n", __func__, channel);
|
|
|
|
if (sdmac->status == DMA_IN_PROGRESS)
|
|
return NULL;
|
|
|
|
sdmac->status = DMA_IN_PROGRESS;
|
|
|
|
sdmac->buf_tail = 0;
|
|
sdmac->buf_ptail = 0;
|
|
sdmac->chn_real_count = 0;
|
|
sdmac->period_len = period_len;
|
|
|
|
sdmac->flags |= IMX_DMA_SG_LOOP;
|
|
sdmac->direction = direction;
|
|
ret = sdma_load_context(sdmac);
|
|
if (ret)
|
|
goto err_out;
|
|
|
|
if (num_periods > NUM_BD) {
|
|
dev_err(sdma->dev, "SDMA channel %d: maximum number of sg exceeded: %d > %d\n",
|
|
channel, num_periods, NUM_BD);
|
|
goto err_out;
|
|
}
|
|
|
|
if (period_len > 0xffff) {
|
|
dev_err(sdma->dev, "SDMA channel %d: maximum period size exceeded: %d > %d\n",
|
|
channel, period_len, 0xffff);
|
|
goto err_out;
|
|
}
|
|
|
|
while (buf < buf_len) {
|
|
struct sdma_buffer_descriptor *bd = &sdmac->bd[i];
|
|
int param;
|
|
|
|
bd->buffer_addr = dma_addr;
|
|
|
|
bd->mode.count = period_len;
|
|
|
|
if (sdmac->word_size > DMA_SLAVE_BUSWIDTH_4_BYTES)
|
|
goto err_out;
|
|
if (sdmac->word_size == DMA_SLAVE_BUSWIDTH_4_BYTES)
|
|
bd->mode.command = 0;
|
|
else
|
|
bd->mode.command = sdmac->word_size;
|
|
|
|
param = BD_DONE | BD_EXTD | BD_CONT | BD_INTR;
|
|
if (i + 1 == num_periods)
|
|
param |= BD_WRAP;
|
|
|
|
dev_dbg(sdma->dev, "entry %d: count: %d dma: %#llx %s%s\n",
|
|
i, period_len, (u64)dma_addr,
|
|
param & BD_WRAP ? "wrap" : "",
|
|
param & BD_INTR ? " intr" : "");
|
|
|
|
bd->mode.status = param;
|
|
|
|
dma_addr += period_len;
|
|
buf += period_len;
|
|
|
|
i++;
|
|
}
|
|
|
|
sdmac->num_bd = num_periods;
|
|
sdma->channel_control[channel].current_bd_ptr = sdmac->bd_phys;
|
|
|
|
return &sdmac->desc;
|
|
err_out:
|
|
sdmac->status = DMA_ERROR;
|
|
return NULL;
|
|
}
|
|
|
|
static int sdma_config(struct dma_chan *chan,
|
|
struct dma_slave_config *dmaengine_cfg)
|
|
{
|
|
struct sdma_channel *sdmac = to_sdma_chan(chan);
|
|
|
|
if (dmaengine_cfg->direction == DMA_DEV_TO_MEM) {
|
|
sdmac->per_address = dmaengine_cfg->src_addr;
|
|
sdmac->watermark_level = dmaengine_cfg->src_maxburst *
|
|
dmaengine_cfg->src_addr_width;
|
|
sdmac->word_size = dmaengine_cfg->src_addr_width;
|
|
} else if (dmaengine_cfg->direction == DMA_DEV_TO_DEV) {
|
|
sdmac->per_address2 = dmaengine_cfg->src_addr;
|
|
sdmac->per_address = dmaengine_cfg->dst_addr;
|
|
sdmac->watermark_level = dmaengine_cfg->src_maxburst &
|
|
SDMA_WATERMARK_LEVEL_LWML;
|
|
sdmac->watermark_level |= (dmaengine_cfg->dst_maxburst << 16) &
|
|
SDMA_WATERMARK_LEVEL_HWML;
|
|
sdmac->word_size = dmaengine_cfg->dst_addr_width;
|
|
} else {
|
|
sdmac->per_address = dmaengine_cfg->dst_addr;
|
|
sdmac->watermark_level = dmaengine_cfg->dst_maxburst *
|
|
dmaengine_cfg->dst_addr_width;
|
|
sdmac->word_size = dmaengine_cfg->dst_addr_width;
|
|
}
|
|
sdmac->direction = dmaengine_cfg->direction;
|
|
return sdma_config_channel(chan);
|
|
}
|
|
|
|
static enum dma_status sdma_tx_status(struct dma_chan *chan,
|
|
dma_cookie_t cookie,
|
|
struct dma_tx_state *txstate)
|
|
{
|
|
struct sdma_channel *sdmac = to_sdma_chan(chan);
|
|
u32 residue;
|
|
|
|
if (sdmac->flags & IMX_DMA_SG_LOOP)
|
|
residue = (sdmac->num_bd - sdmac->buf_ptail) *
|
|
sdmac->period_len - sdmac->chn_real_count;
|
|
else
|
|
residue = sdmac->chn_count - sdmac->chn_real_count;
|
|
|
|
dma_set_tx_state(txstate, chan->completed_cookie, chan->cookie,
|
|
residue);
|
|
|
|
return sdmac->status;
|
|
}
|
|
|
|
static void sdma_issue_pending(struct dma_chan *chan)
|
|
{
|
|
struct sdma_channel *sdmac = to_sdma_chan(chan);
|
|
struct sdma_engine *sdma = sdmac->sdma;
|
|
|
|
if (sdmac->status == DMA_IN_PROGRESS)
|
|
sdma_enable_channel(sdma, sdmac->channel);
|
|
}
|
|
|
|
#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1 34
|
|
#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V2 38
|
|
#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3 41
|
|
#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V4 42
|
|
|
|
static void sdma_add_scripts(struct sdma_engine *sdma,
|
|
const struct sdma_script_start_addrs *addr)
|
|
{
|
|
s32 *addr_arr = (u32 *)addr;
|
|
s32 *saddr_arr = (u32 *)sdma->script_addrs;
|
|
int i;
|
|
|
|
/* use the default firmware in ROM if missing external firmware */
|
|
if (!sdma->script_number)
|
|
sdma->script_number = SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1;
|
|
|
|
for (i = 0; i < sdma->script_number; i++)
|
|
if (addr_arr[i] > 0)
|
|
saddr_arr[i] = addr_arr[i];
|
|
}
|
|
|
|
static void sdma_load_firmware(const struct firmware *fw, void *context)
|
|
{
|
|
struct sdma_engine *sdma = context;
|
|
const struct sdma_firmware_header *header;
|
|
const struct sdma_script_start_addrs *addr;
|
|
unsigned short *ram_code;
|
|
|
|
if (!fw) {
|
|
dev_info(sdma->dev, "external firmware not found, using ROM firmware\n");
|
|
/* In this case we just use the ROM firmware. */
|
|
return;
|
|
}
|
|
|
|
if (fw->size < sizeof(*header))
|
|
goto err_firmware;
|
|
|
|
header = (struct sdma_firmware_header *)fw->data;
|
|
|
|
if (header->magic != SDMA_FIRMWARE_MAGIC)
|
|
goto err_firmware;
|
|
if (header->ram_code_start + header->ram_code_size > fw->size)
|
|
goto err_firmware;
|
|
switch (header->version_major) {
|
|
case 1:
|
|
sdma->script_number = SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1;
|
|
break;
|
|
case 2:
|
|
sdma->script_number = SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V2;
|
|
break;
|
|
case 3:
|
|
sdma->script_number = SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3;
|
|
break;
|
|
case 4:
|
|
sdma->script_number = SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V4;
|
|
break;
|
|
default:
|
|
dev_err(sdma->dev, "unknown firmware version\n");
|
|
goto err_firmware;
|
|
}
|
|
|
|
addr = (void *)header + header->script_addrs_start;
|
|
ram_code = (void *)header + header->ram_code_start;
|
|
|
|
clk_enable(sdma->clk_ipg);
|
|
clk_enable(sdma->clk_ahb);
|
|
/* download the RAM image for SDMA */
|
|
sdma_load_script(sdma, ram_code,
|
|
header->ram_code_size,
|
|
addr->ram_code_start_addr);
|
|
clk_disable(sdma->clk_ipg);
|
|
clk_disable(sdma->clk_ahb);
|
|
|
|
sdma_add_scripts(sdma, addr);
|
|
|
|
dev_info(sdma->dev, "loaded firmware %d.%d\n",
|
|
header->version_major,
|
|
header->version_minor);
|
|
|
|
err_firmware:
|
|
release_firmware(fw);
|
|
}
|
|
|
|
#define EVENT_REMAP_CELLS 3
|
|
|
|
static int sdma_event_remap(struct sdma_engine *sdma)
|
|
{
|
|
struct device_node *np = sdma->dev->of_node;
|
|
struct device_node *gpr_np = of_parse_phandle(np, "gpr", 0);
|
|
struct property *event_remap;
|
|
struct regmap *gpr;
|
|
char propname[] = "fsl,sdma-event-remap";
|
|
u32 reg, val, shift, num_map, i;
|
|
int ret = 0;
|
|
|
|
if (IS_ERR(np) || IS_ERR(gpr_np))
|
|
goto out;
|
|
|
|
event_remap = of_find_property(np, propname, NULL);
|
|
num_map = event_remap ? (event_remap->length / sizeof(u32)) : 0;
|
|
if (!num_map) {
|
|
dev_dbg(sdma->dev, "no event needs to be remapped\n");
|
|
goto out;
|
|
} else if (num_map % EVENT_REMAP_CELLS) {
|
|
dev_err(sdma->dev, "the property %s must modulo %d\n",
|
|
propname, EVENT_REMAP_CELLS);
|
|
ret = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
gpr = syscon_node_to_regmap(gpr_np);
|
|
if (IS_ERR(gpr)) {
|
|
dev_err(sdma->dev, "failed to get gpr regmap\n");
|
|
ret = PTR_ERR(gpr);
|
|
goto out;
|
|
}
|
|
|
|
for (i = 0; i < num_map; i += EVENT_REMAP_CELLS) {
|
|
ret = of_property_read_u32_index(np, propname, i, ®);
|
|
if (ret) {
|
|
dev_err(sdma->dev, "failed to read property %s index %d\n",
|
|
propname, i);
|
|
goto out;
|
|
}
|
|
|
|
ret = of_property_read_u32_index(np, propname, i + 1, &shift);
|
|
if (ret) {
|
|
dev_err(sdma->dev, "failed to read property %s index %d\n",
|
|
propname, i + 1);
|
|
goto out;
|
|
}
|
|
|
|
ret = of_property_read_u32_index(np, propname, i + 2, &val);
|
|
if (ret) {
|
|
dev_err(sdma->dev, "failed to read property %s index %d\n",
|
|
propname, i + 2);
|
|
goto out;
|
|
}
|
|
|
|
regmap_update_bits(gpr, reg, BIT(shift), val << shift);
|
|
}
|
|
|
|
out:
|
|
if (!IS_ERR(gpr_np))
|
|
of_node_put(gpr_np);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sdma_get_firmware(struct sdma_engine *sdma,
|
|
const char *fw_name)
|
|
{
|
|
int ret;
|
|
|
|
ret = request_firmware_nowait(THIS_MODULE,
|
|
FW_ACTION_HOTPLUG, fw_name, sdma->dev,
|
|
GFP_KERNEL, sdma, sdma_load_firmware);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sdma_init(struct sdma_engine *sdma)
|
|
{
|
|
int i, ret;
|
|
dma_addr_t ccb_phys;
|
|
|
|
ret = clk_enable(sdma->clk_ipg);
|
|
if (ret)
|
|
return ret;
|
|
ret = clk_enable(sdma->clk_ahb);
|
|
if (ret)
|
|
goto disable_clk_ipg;
|
|
|
|
/* Be sure SDMA has not started yet */
|
|
writel_relaxed(0, sdma->regs + SDMA_H_C0PTR);
|
|
|
|
sdma->channel_control = dma_alloc_coherent(NULL,
|
|
MAX_DMA_CHANNELS * sizeof (struct sdma_channel_control) +
|
|
sizeof(struct sdma_context_data),
|
|
&ccb_phys, GFP_KERNEL);
|
|
|
|
if (!sdma->channel_control) {
|
|
ret = -ENOMEM;
|
|
goto err_dma_alloc;
|
|
}
|
|
|
|
sdma->context = (void *)sdma->channel_control +
|
|
MAX_DMA_CHANNELS * sizeof (struct sdma_channel_control);
|
|
sdma->context_phys = ccb_phys +
|
|
MAX_DMA_CHANNELS * sizeof (struct sdma_channel_control);
|
|
|
|
/* Zero-out the CCB structures array just allocated */
|
|
memset(sdma->channel_control, 0,
|
|
MAX_DMA_CHANNELS * sizeof (struct sdma_channel_control));
|
|
|
|
/* disable all channels */
|
|
for (i = 0; i < sdma->drvdata->num_events; i++)
|
|
writel_relaxed(0, sdma->regs + chnenbl_ofs(sdma, i));
|
|
|
|
/* All channels have priority 0 */
|
|
for (i = 0; i < MAX_DMA_CHANNELS; i++)
|
|
writel_relaxed(0, sdma->regs + SDMA_CHNPRI_0 + i * 4);
|
|
|
|
ret = sdma_request_channel(&sdma->channel[0]);
|
|
if (ret)
|
|
goto err_dma_alloc;
|
|
|
|
sdma_config_ownership(&sdma->channel[0], false, true, false);
|
|
|
|
/* Set Command Channel (Channel Zero) */
|
|
writel_relaxed(0x4050, sdma->regs + SDMA_CHN0ADDR);
|
|
|
|
/* Set bits of CONFIG register but with static context switching */
|
|
/* FIXME: Check whether to set ACR bit depending on clock ratios */
|
|
writel_relaxed(0, sdma->regs + SDMA_H_CONFIG);
|
|
|
|
writel_relaxed(ccb_phys, sdma->regs + SDMA_H_C0PTR);
|
|
|
|
/* Initializes channel's priorities */
|
|
sdma_set_channel_priority(&sdma->channel[0], 7);
|
|
|
|
clk_disable(sdma->clk_ipg);
|
|
clk_disable(sdma->clk_ahb);
|
|
|
|
return 0;
|
|
|
|
err_dma_alloc:
|
|
clk_disable(sdma->clk_ahb);
|
|
disable_clk_ipg:
|
|
clk_disable(sdma->clk_ipg);
|
|
dev_err(sdma->dev, "initialisation failed with %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static bool sdma_filter_fn(struct dma_chan *chan, void *fn_param)
|
|
{
|
|
struct sdma_channel *sdmac = to_sdma_chan(chan);
|
|
struct imx_dma_data *data = fn_param;
|
|
|
|
if (!imx_dma_is_general_purpose(chan))
|
|
return false;
|
|
|
|
sdmac->data = *data;
|
|
chan->private = &sdmac->data;
|
|
|
|
return true;
|
|
}
|
|
|
|
static struct dma_chan *sdma_xlate(struct of_phandle_args *dma_spec,
|
|
struct of_dma *ofdma)
|
|
{
|
|
struct sdma_engine *sdma = ofdma->of_dma_data;
|
|
dma_cap_mask_t mask = sdma->dma_device.cap_mask;
|
|
struct imx_dma_data data;
|
|
|
|
if (dma_spec->args_count != 3)
|
|
return NULL;
|
|
|
|
data.dma_request = dma_spec->args[0];
|
|
data.peripheral_type = dma_spec->args[1];
|
|
data.priority = dma_spec->args[2];
|
|
/*
|
|
* init dma_request2 to zero, which is not used by the dts.
|
|
* For P2P, dma_request2 is init from dma_request_channel(),
|
|
* chan->private will point to the imx_dma_data, and in
|
|
* device_alloc_chan_resources(), imx_dma_data.dma_request2 will
|
|
* be set to sdmac->event_id1.
|
|
*/
|
|
data.dma_request2 = 0;
|
|
|
|
return dma_request_channel(mask, sdma_filter_fn, &data);
|
|
}
|
|
|
|
static int sdma_probe(struct platform_device *pdev)
|
|
{
|
|
const struct of_device_id *of_id =
|
|
of_match_device(sdma_dt_ids, &pdev->dev);
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct device_node *spba_bus;
|
|
const char *fw_name;
|
|
int ret;
|
|
int irq;
|
|
struct resource *iores;
|
|
struct resource spba_res;
|
|
struct sdma_platform_data *pdata = dev_get_platdata(&pdev->dev);
|
|
int i;
|
|
struct sdma_engine *sdma;
|
|
s32 *saddr_arr;
|
|
const struct sdma_driver_data *drvdata = NULL;
|
|
|
|
if (of_id)
|
|
drvdata = of_id->data;
|
|
else if (pdev->id_entry)
|
|
drvdata = (void *)pdev->id_entry->driver_data;
|
|
|
|
if (!drvdata) {
|
|
dev_err(&pdev->dev, "unable to find driver data\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
|
|
if (ret)
|
|
return ret;
|
|
|
|
sdma = devm_kzalloc(&pdev->dev, sizeof(*sdma), GFP_KERNEL);
|
|
if (!sdma)
|
|
return -ENOMEM;
|
|
|
|
spin_lock_init(&sdma->channel_0_lock);
|
|
|
|
sdma->dev = &pdev->dev;
|
|
sdma->drvdata = drvdata;
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0)
|
|
return irq;
|
|
|
|
iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
sdma->regs = devm_ioremap_resource(&pdev->dev, iores);
|
|
if (IS_ERR(sdma->regs))
|
|
return PTR_ERR(sdma->regs);
|
|
|
|
sdma->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
|
|
if (IS_ERR(sdma->clk_ipg))
|
|
return PTR_ERR(sdma->clk_ipg);
|
|
|
|
sdma->clk_ahb = devm_clk_get(&pdev->dev, "ahb");
|
|
if (IS_ERR(sdma->clk_ahb))
|
|
return PTR_ERR(sdma->clk_ahb);
|
|
|
|
clk_prepare(sdma->clk_ipg);
|
|
clk_prepare(sdma->clk_ahb);
|
|
|
|
ret = devm_request_irq(&pdev->dev, irq, sdma_int_handler, 0, "sdma",
|
|
sdma);
|
|
if (ret)
|
|
return ret;
|
|
|
|
sdma->irq = irq;
|
|
|
|
sdma->script_addrs = kzalloc(sizeof(*sdma->script_addrs), GFP_KERNEL);
|
|
if (!sdma->script_addrs)
|
|
return -ENOMEM;
|
|
|
|
/* initially no scripts available */
|
|
saddr_arr = (s32 *)sdma->script_addrs;
|
|
for (i = 0; i < SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1; i++)
|
|
saddr_arr[i] = -EINVAL;
|
|
|
|
dma_cap_set(DMA_SLAVE, sdma->dma_device.cap_mask);
|
|
dma_cap_set(DMA_CYCLIC, sdma->dma_device.cap_mask);
|
|
|
|
INIT_LIST_HEAD(&sdma->dma_device.channels);
|
|
/* Initialize channel parameters */
|
|
for (i = 0; i < MAX_DMA_CHANNELS; i++) {
|
|
struct sdma_channel *sdmac = &sdma->channel[i];
|
|
|
|
sdmac->sdma = sdma;
|
|
spin_lock_init(&sdmac->lock);
|
|
|
|
sdmac->chan.device = &sdma->dma_device;
|
|
dma_cookie_init(&sdmac->chan);
|
|
sdmac->channel = i;
|
|
|
|
tasklet_init(&sdmac->tasklet, mxc_sdma_handle_channel_normal,
|
|
(unsigned long) sdmac);
|
|
/*
|
|
* Add the channel to the DMAC list. Do not add channel 0 though
|
|
* because we need it internally in the SDMA driver. This also means
|
|
* that channel 0 in dmaengine counting matches sdma channel 1.
|
|
*/
|
|
if (i)
|
|
list_add_tail(&sdmac->chan.device_node,
|
|
&sdma->dma_device.channels);
|
|
}
|
|
|
|
ret = sdma_init(sdma);
|
|
if (ret)
|
|
goto err_init;
|
|
|
|
ret = sdma_event_remap(sdma);
|
|
if (ret)
|
|
goto err_init;
|
|
|
|
if (sdma->drvdata->script_addrs)
|
|
sdma_add_scripts(sdma, sdma->drvdata->script_addrs);
|
|
if (pdata && pdata->script_addrs)
|
|
sdma_add_scripts(sdma, pdata->script_addrs);
|
|
|
|
if (pdata) {
|
|
ret = sdma_get_firmware(sdma, pdata->fw_name);
|
|
if (ret)
|
|
dev_warn(&pdev->dev, "failed to get firmware from platform data\n");
|
|
} else {
|
|
/*
|
|
* Because that device tree does not encode ROM script address,
|
|
* the RAM script in firmware is mandatory for device tree
|
|
* probe, otherwise it fails.
|
|
*/
|
|
ret = of_property_read_string(np, "fsl,sdma-ram-script-name",
|
|
&fw_name);
|
|
if (ret)
|
|
dev_warn(&pdev->dev, "failed to get firmware name\n");
|
|
else {
|
|
ret = sdma_get_firmware(sdma, fw_name);
|
|
if (ret)
|
|
dev_warn(&pdev->dev, "failed to get firmware from device tree\n");
|
|
}
|
|
}
|
|
|
|
sdma->dma_device.dev = &pdev->dev;
|
|
|
|
sdma->dma_device.device_alloc_chan_resources = sdma_alloc_chan_resources;
|
|
sdma->dma_device.device_free_chan_resources = sdma_free_chan_resources;
|
|
sdma->dma_device.device_tx_status = sdma_tx_status;
|
|
sdma->dma_device.device_prep_slave_sg = sdma_prep_slave_sg;
|
|
sdma->dma_device.device_prep_dma_cyclic = sdma_prep_dma_cyclic;
|
|
sdma->dma_device.device_config = sdma_config;
|
|
sdma->dma_device.device_terminate_all = sdma_disable_channel;
|
|
sdma->dma_device.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
|
|
sdma->dma_device.dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
|
|
sdma->dma_device.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
|
|
sdma->dma_device.residue_granularity = DMA_RESIDUE_GRANULARITY_SEGMENT;
|
|
sdma->dma_device.device_issue_pending = sdma_issue_pending;
|
|
sdma->dma_device.dev->dma_parms = &sdma->dma_parms;
|
|
dma_set_max_seg_size(sdma->dma_device.dev, 65535);
|
|
|
|
platform_set_drvdata(pdev, sdma);
|
|
|
|
ret = dma_async_device_register(&sdma->dma_device);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "unable to register\n");
|
|
goto err_init;
|
|
}
|
|
|
|
if (np) {
|
|
ret = of_dma_controller_register(np, sdma_xlate, sdma);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to register controller\n");
|
|
goto err_register;
|
|
}
|
|
|
|
spba_bus = of_find_compatible_node(NULL, NULL, "fsl,spba-bus");
|
|
ret = of_address_to_resource(spba_bus, 0, &spba_res);
|
|
if (!ret) {
|
|
sdma->spba_start_addr = spba_res.start;
|
|
sdma->spba_end_addr = spba_res.end;
|
|
}
|
|
of_node_put(spba_bus);
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_register:
|
|
dma_async_device_unregister(&sdma->dma_device);
|
|
err_init:
|
|
kfree(sdma->script_addrs);
|
|
return ret;
|
|
}
|
|
|
|
static int sdma_remove(struct platform_device *pdev)
|
|
{
|
|
struct sdma_engine *sdma = platform_get_drvdata(pdev);
|
|
int i;
|
|
|
|
devm_free_irq(&pdev->dev, sdma->irq, sdma);
|
|
dma_async_device_unregister(&sdma->dma_device);
|
|
kfree(sdma->script_addrs);
|
|
/* Kill the tasklet */
|
|
for (i = 0; i < MAX_DMA_CHANNELS; i++) {
|
|
struct sdma_channel *sdmac = &sdma->channel[i];
|
|
|
|
tasklet_kill(&sdmac->tasklet);
|
|
}
|
|
|
|
platform_set_drvdata(pdev, NULL);
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver sdma_driver = {
|
|
.driver = {
|
|
.name = "imx-sdma",
|
|
.of_match_table = sdma_dt_ids,
|
|
},
|
|
.id_table = sdma_devtypes,
|
|
.remove = sdma_remove,
|
|
.probe = sdma_probe,
|
|
};
|
|
|
|
module_platform_driver(sdma_driver);
|
|
|
|
MODULE_AUTHOR("Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>");
|
|
MODULE_DESCRIPTION("i.MX SDMA driver");
|
|
MODULE_LICENSE("GPL");
|