korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-11 12:28:41 +08:00
Code Issues Packages Projects Releases Wiki Activity
11498715f2
linux/drivers/bluetooth/hci_mrvl.c
Stefan Eichenberger a860c50f7a Bluetooth: hci_mrvl: Add serdev support for 88W8997 
Add serdev support for the 88W8997 from NXP (previously Marvell). It
includes support for changing the baud rate. The command to change the
baud rate is taken from the user manual UM11483 Rev. 9 in section 7
(Bring-up of Bluetooth interfaces) from NXP.

Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23 21:45:29 -07:00

517 lines
12 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
*
* Bluetooth HCI UART driver for marvell devices
*
* Copyright (C) 2016 Marvell International Ltd.
* Copyright (C) 2016 Intel Corporation
*/
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/skbuff.h>
#include <linux/firmware.h>
#include <linux/module.h>
#include <linux/tty.h>
#include <linux/of.h>
#include <linux/serdev.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
#include "hci_uart.h"
#define HCI_FW_REQ_PKT 0xA5
#define HCI_CHIP_VER_PKT 0xAA
#define MRVL_ACK 0x5A
#define MRVL_NAK 0xBF
#define MRVL_RAW_DATA 0x1F
#define MRVL_SET_BAUDRATE 0xFC09
enum {
STATE_CHIP_VER_PENDING,
STATE_FW_REQ_PENDING,
STATE_FW_LOADED,
};
struct mrvl_data {
struct sk_buff *rx_skb;
struct sk_buff_head txq;
struct sk_buff_head rawq;
unsigned long flags;
unsigned int tx_len;
u8 id, rev;
};
struct mrvl_serdev {
struct hci_uart hu;
};
struct hci_mrvl_pkt {
__le16 lhs;
__le16 rhs;
} __packed;
#define HCI_MRVL_PKT_SIZE 4
static int mrvl_open(struct hci_uart *hu)
{
struct mrvl_data *mrvl;
int ret;
BT_DBG("hu %p", hu);
if (!hci_uart_has_flow_control(hu))
return -EOPNOTSUPP;
mrvl = kzalloc(sizeof(*mrvl), GFP_KERNEL);
if (!mrvl)
return -ENOMEM;
skb_queue_head_init(&mrvl->txq);
skb_queue_head_init(&mrvl->rawq);
set_bit(STATE_CHIP_VER_PENDING, &mrvl->flags);
hu->priv = mrvl;
if (hu->serdev) {
ret = serdev_device_open(hu->serdev);
if (ret)
goto err;
}
return 0;
err:
kfree(mrvl);
return ret;
}
static int mrvl_close(struct hci_uart *hu)
{
struct mrvl_data *mrvl = hu->priv;
BT_DBG("hu %p", hu);
if (hu->serdev)
serdev_device_close(hu->serdev);
skb_queue_purge(&mrvl->txq);
skb_queue_purge(&mrvl->rawq);
kfree_skb(mrvl->rx_skb);
kfree(mrvl);
hu->priv = NULL;
return 0;
}
static int mrvl_flush(struct hci_uart *hu)
{
struct mrvl_data *mrvl = hu->priv;
BT_DBG("hu %p", hu);
skb_queue_purge(&mrvl->txq);
skb_queue_purge(&mrvl->rawq);
return 0;
}
static struct sk_buff *mrvl_dequeue(struct hci_uart *hu)
{
struct mrvl_data *mrvl = hu->priv;
struct sk_buff *skb;
skb = skb_dequeue(&mrvl->txq);
if (!skb) {
/* Any raw data ? */
skb = skb_dequeue(&mrvl->rawq);
} else {
/* Prepend skb with frame type */
memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1);
}
return skb;
}
static int mrvl_enqueue(struct hci_uart *hu, struct sk_buff *skb)
{
struct mrvl_data *mrvl = hu->priv;
skb_queue_tail(&mrvl->txq, skb);
return 0;
}
static void mrvl_send_ack(struct hci_uart *hu, unsigned char type)
{
struct mrvl_data *mrvl = hu->priv;
struct sk_buff *skb;
/* No H4 payload, only 1 byte header */
skb = bt_skb_alloc(0, GFP_ATOMIC);
if (!skb) {
bt_dev_err(hu->hdev, "Unable to alloc ack/nak packet");
return;
}
hci_skb_pkt_type(skb) = type;
skb_queue_tail(&mrvl->txq, skb);
hci_uart_tx_wakeup(hu);
}
static int mrvl_recv_fw_req(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_mrvl_pkt *pkt = (void *)skb->data;
struct hci_uart *hu = hci_get_drvdata(hdev);
struct mrvl_data *mrvl = hu->priv;
int ret = 0;
if ((pkt->lhs ^ pkt->rhs) != 0xffff) {
bt_dev_err(hdev, "Corrupted mrvl header");
mrvl_send_ack(hu, MRVL_NAK);
ret = -EINVAL;
goto done;
}
mrvl_send_ack(hu, MRVL_ACK);
if (!test_bit(STATE_FW_REQ_PENDING, &mrvl->flags)) {
bt_dev_err(hdev, "Received unexpected firmware request");
ret = -EINVAL;
goto done;
}
mrvl->tx_len = le16_to_cpu(pkt->lhs);
clear_bit(STATE_FW_REQ_PENDING, &mrvl->flags);
smp_mb__after_atomic();
wake_up_bit(&mrvl->flags, STATE_FW_REQ_PENDING);
done:
kfree_skb(skb);
return ret;
}
static int mrvl_recv_chip_ver(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_mrvl_pkt *pkt = (void *)skb->data;
struct hci_uart *hu = hci_get_drvdata(hdev);
struct mrvl_data *mrvl = hu->priv;
u16 version = le16_to_cpu(pkt->lhs);
int ret = 0;
if ((pkt->lhs ^ pkt->rhs) != 0xffff) {
bt_dev_err(hdev, "Corrupted mrvl header");
mrvl_send_ack(hu, MRVL_NAK);
ret = -EINVAL;
goto done;
}
mrvl_send_ack(hu, MRVL_ACK);
if (!test_bit(STATE_CHIP_VER_PENDING, &mrvl->flags)) {
bt_dev_err(hdev, "Received unexpected chip version");
goto done;
}
mrvl->id = version;
mrvl->rev = version >> 8;
bt_dev_info(hdev, "Controller id = %x, rev = %x", mrvl->id, mrvl->rev);
clear_bit(STATE_CHIP_VER_PENDING, &mrvl->flags);
smp_mb__after_atomic();
wake_up_bit(&mrvl->flags, STATE_CHIP_VER_PENDING);
done:
kfree_skb(skb);
return ret;
}
#define HCI_RECV_CHIP_VER \
.type = HCI_CHIP_VER_PKT, \
.hlen = HCI_MRVL_PKT_SIZE, \
.loff = 0, \
.lsize = 0, \
.maxlen = HCI_MRVL_PKT_SIZE
#define HCI_RECV_FW_REQ \
.type = HCI_FW_REQ_PKT, \
.hlen = HCI_MRVL_PKT_SIZE, \
.loff = 0, \
.lsize = 0, \
.maxlen = HCI_MRVL_PKT_SIZE
static const struct h4_recv_pkt mrvl_recv_pkts[] = {
{ H4_RECV_ACL, .recv = hci_recv_frame },
{ H4_RECV_SCO, .recv = hci_recv_frame },
{ H4_RECV_EVENT, .recv = hci_recv_frame },
{ HCI_RECV_FW_REQ, .recv = mrvl_recv_fw_req },
{ HCI_RECV_CHIP_VER, .recv = mrvl_recv_chip_ver },
};
static int mrvl_recv(struct hci_uart *hu, const void *data, int count)
{
struct mrvl_data *mrvl = hu->priv;
if (!test_bit(HCI_UART_REGISTERED, &hu->flags))
return -EUNATCH;
/* We might receive some noise when there is no firmware loaded. Therefore,
* we drop data if the firmware is not loaded yet and if there is no fw load
* request pending.
*/
if (!test_bit(STATE_FW_REQ_PENDING, &mrvl->flags) &&
!test_bit(STATE_FW_LOADED, &mrvl->flags))
return count;
mrvl->rx_skb = h4_recv_buf(hu->hdev, mrvl->rx_skb, data, count,
mrvl_recv_pkts,
ARRAY_SIZE(mrvl_recv_pkts));
if (IS_ERR(mrvl->rx_skb)) {
int err = PTR_ERR(mrvl->rx_skb);
bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err);
mrvl->rx_skb = NULL;
return err;
}
return count;
}
static int mrvl_load_firmware(struct hci_dev *hdev, const char *name)
{
struct hci_uart *hu = hci_get_drvdata(hdev);
struct mrvl_data *mrvl = hu->priv;
const struct firmware *fw = NULL;
const u8 *fw_ptr, *fw_max;
int err;
err = request_firmware(&fw, name, &hdev->dev);
if (err < 0) {
bt_dev_err(hdev, "Failed to load firmware file %s", name);
return err;
}
fw_ptr = fw->data;
fw_max = fw->data + fw->size;
bt_dev_info(hdev, "Loading %s", name);
set_bit(STATE_FW_REQ_PENDING, &mrvl->flags);
while (fw_ptr <= fw_max) {
struct sk_buff *skb;
/* Controller drives the firmware load by sending firmware
* request packets containing the expected fragment size.
*/
err = wait_on_bit_timeout(&mrvl->flags, STATE_FW_REQ_PENDING,
TASK_INTERRUPTIBLE,
msecs_to_jiffies(2000));
if (err == 1) {
bt_dev_err(hdev, "Firmware load interrupted");
err = -EINTR;
break;
} else if (err) {
bt_dev_err(hdev, "Firmware request timeout");
err = -ETIMEDOUT;
break;
}
bt_dev_dbg(hdev, "Firmware request, expecting %d bytes",
mrvl->tx_len);
if (fw_ptr == fw_max) {
/* Controller requests a null size once firmware is
* fully loaded. If controller expects more data, there
* is an issue.
*/
if (!mrvl->tx_len) {
bt_dev_info(hdev, "Firmware loading complete");
} else {
bt_dev_err(hdev, "Firmware loading failure");
err = -EINVAL;
}
break;
}
if (fw_ptr + mrvl->tx_len > fw_max) {
mrvl->tx_len = fw_max - fw_ptr;
bt_dev_dbg(hdev, "Adjusting tx_len to %d",
mrvl->tx_len);
}
skb = bt_skb_alloc(mrvl->tx_len, GFP_KERNEL);
if (!skb) {
bt_dev_err(hdev, "Failed to alloc mem for FW packet");
err = -ENOMEM;
break;
}
bt_cb(skb)->pkt_type = MRVL_RAW_DATA;
skb_put_data(skb, fw_ptr, mrvl->tx_len);
fw_ptr += mrvl->tx_len;
set_bit(STATE_FW_REQ_PENDING, &mrvl->flags);
skb_queue_tail(&mrvl->rawq, skb);
hci_uart_tx_wakeup(hu);
}
release_firmware(fw);
return err;
}
static int mrvl_setup(struct hci_uart *hu)
{
int err;
struct mrvl_data *mrvl = hu->priv;
hci_uart_set_flow_control(hu, true);
err = mrvl_load_firmware(hu->hdev, "mrvl/helper_uart_3000000.bin");
if (err) {
bt_dev_err(hu->hdev, "Unable to download firmware helper");
return -EINVAL;
}
/* Let the final ack go out before switching the baudrate */
hci_uart_wait_until_sent(hu);
if (hu->serdev)
serdev_device_set_baudrate(hu->serdev, hu->oper_speed);
else
hci_uart_set_baudrate(hu, hu->oper_speed);
hci_uart_set_flow_control(hu, false);
err = mrvl_load_firmware(hu->hdev, "mrvl/uart8897_bt.bin");
if (err)
return err;
set_bit(STATE_FW_LOADED, &mrvl->flags);
return 0;
}
static int mrvl_set_baudrate(struct hci_uart *hu, unsigned int speed)
{
int err;
struct mrvl_data *mrvl = hu->priv;
__le32 speed_le = cpu_to_le32(speed);
/* The firmware might be loaded by the Wifi driver over SDIO. We wait
* up to 10s for the CTS to go up. Afterward, we know that the firmware
* is ready.
*/
err = serdev_device_wait_for_cts(hu->serdev, true, 10000);
if (err) {
bt_dev_err(hu->hdev, "Wait for CTS failed with %d\n", err);
return err;
}
set_bit(STATE_FW_LOADED, &mrvl->flags);
err = __hci_cmd_sync_status(hu->hdev, MRVL_SET_BAUDRATE,
sizeof(speed_le), &speed_le,
HCI_INIT_TIMEOUT);
if (err) {
bt_dev_err(hu->hdev, "send command failed: %d", err);
return err;
}
serdev_device_set_baudrate(hu->serdev, speed);
/* We forcefully have to send a command to the bluetooth module so that
* the driver detects it after a baudrate change. This is foreseen by
* hci_serdev by setting HCI_UART_VND_DETECT which then causes a dummy
* local version read.
*/
set_bit(HCI_UART_VND_DETECT, &hu->hdev_flags);
return 0;
}
static const struct hci_uart_proto mrvl_proto_8897 = {
.id = HCI_UART_MRVL,
.name = "Marvell",
.init_speed = 115200,
.oper_speed = 3000000,
.open = mrvl_open,
.close = mrvl_close,
.flush = mrvl_flush,
.setup = mrvl_setup,
.recv = mrvl_recv,
.enqueue = mrvl_enqueue,
.dequeue = mrvl_dequeue,
};
static const struct hci_uart_proto mrvl_proto_8997 = {
.id = HCI_UART_MRVL,
.name = "Marvell 8997",
.init_speed = 115200,
.oper_speed = 3000000,
.open = mrvl_open,
.close = mrvl_close,
.flush = mrvl_flush,
.set_baudrate = mrvl_set_baudrate,
.recv = mrvl_recv,
.enqueue = mrvl_enqueue,
.dequeue = mrvl_dequeue,
};
static int mrvl_serdev_probe(struct serdev_device *serdev)
{
struct mrvl_serdev *mrvldev;
const struct hci_uart_proto *mrvl_proto = device_get_match_data(&serdev->dev);
mrvldev = devm_kzalloc(&serdev->dev, sizeof(*mrvldev), GFP_KERNEL);
if (!mrvldev)
return -ENOMEM;
mrvldev->hu.oper_speed = mrvl_proto->oper_speed;
if (mrvl_proto->set_baudrate)
of_property_read_u32(serdev->dev.of_node, "max-speed", &mrvldev->hu.oper_speed);
mrvldev->hu.serdev = serdev;
serdev_device_set_drvdata(serdev, mrvldev);
return hci_uart_register_device(&mrvldev->hu, mrvl_proto);
}
static void mrvl_serdev_remove(struct serdev_device *serdev)
{
struct mrvl_serdev *mrvldev = serdev_device_get_drvdata(serdev);
hci_uart_unregister_device(&mrvldev->hu);
}
static const struct of_device_id __maybe_unused mrvl_bluetooth_of_match[] = {
{ .compatible = "mrvl,88w8897", .data = &mrvl_proto_8897},
{ .compatible = "mrvl,88w8997", .data = &mrvl_proto_8997},
{ },
};
MODULE_DEVICE_TABLE(of, mrvl_bluetooth_of_match);
static struct serdev_device_driver mrvl_serdev_driver = {
.probe = mrvl_serdev_probe,
.remove = mrvl_serdev_remove,
.driver = {
.name = "hci_uart_mrvl",
.of_match_table = of_match_ptr(mrvl_bluetooth_of_match),
},
};
int __init mrvl_init(void)
{
serdev_device_driver_register(&mrvl_serdev_driver);
return hci_uart_register_proto(&mrvl_proto_8897);
}
int __exit mrvl_deinit(void)
{
serdev_device_driver_unregister(&mrvl_serdev_driver);
return hci_uart_unregister_proto(&mrvl_proto_8897);
}
Reference in New Issue View Git Blame Copy Permalink