linux/drivers/phy
Yoshihiro Shimoda 1114e2d317 phy: rcar-gen3-usb2: change the mode to OTG on the combined channel
To use the channel 0 of R-Car gen3 as periperal mode, This patch changes
the mode to OTG instead of HOST. Then, this driver needs to set some
registers to enable host mode and detects ID pin and VBUS pin at
phy_init() timing.

For now, the channel 0 can be used as host mode only.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-12-20 15:21:37 +05:30
..
Kconfig phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver 2015-12-20 15:21:37 +05:30
Makefile phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver 2015-12-20 15:21:37 +05:30
phy-armada375-usb2.c phy: Constify struct phy_ops variables 2015-08-03 18:35:09 +05:30
phy-bcm-cygnus-pcie.c phy: cygnus: pcie: add missing of_node_put 2015-12-03 12:28:23 +05:30
phy-bcm-kona-usb2.c phy: Constify struct phy_ops variables 2015-08-03 18:35:09 +05:30
phy-berlin-sata.c phy: berlin-sata: add missing of_node_put 2015-12-03 12:28:23 +05:30
phy-berlin-usb.c phy: for 4.3 2015-08-14 16:45:51 -07:00
phy-brcmstb-sata.c phy: brcmstb-sata: add missing of_node_put 2015-12-03 12:28:23 +05:30
phy-core.c phy: core: Get a refcount to phy in devm_of_phy_get_by_index() 2015-12-07 18:44:02 +05:30
phy-dm816x-usb.c phy: Constify struct phy_ops variables 2015-08-03 18:35:09 +05:30
phy-exynos4x12-usb2.c phy: samsung-usb2: Remove NULL terminating entry from phys array 2015-03-12 11:01:16 +05:30
phy-exynos5-usbdrd.c phy: Constify struct phy_ops variables 2015-08-03 18:35:09 +05:30
phy-exynos4210-usb2.c phy: samsung-usb2: Remove NULL terminating entry from phys array 2015-03-12 11:01:16 +05:30
phy-exynos5250-sata.c phy: Constify struct phy_ops variables 2015-08-03 18:35:09 +05:30
phy-exynos5250-usb2.c phy: samsung-usb2: Remove NULL terminating entry from phys array 2015-03-12 11:01:16 +05:30
phy-exynos-dp-video.c phy: Constify struct phy_ops variables 2015-08-03 18:35:09 +05:30
phy-exynos-mipi-video.c phy: Constify struct phy_ops variables 2015-08-03 18:35:09 +05:30
phy-hix5hd2-sata.c phy: Constify struct phy_ops variables 2015-08-03 18:35:09 +05:30
phy-lpc18xx-usb-otg.c phy: lpc18xx-usb-otg: fix clock order in phy init 2015-08-10 20:11:58 +05:30
phy-miphy28lp.c phy: miphy28lp: add missing of_node_put 2015-12-03 12:28:23 +05:30
phy-miphy365x.c phy: miphy365x: add missing of_node_put 2015-12-03 12:28:23 +05:30
phy-mt65xx-usb3.c phy: mt65xx-usb3: add missing of_node_put 2015-12-03 12:28:23 +05:30
phy-mvebu-sata.c phy: Constify struct phy_ops variables 2015-08-03 18:35:09 +05:30
phy-omap-control.c New Features 2015-04-10 13:47:50 +02:00
phy-omap-usb2.c phy: Constify struct phy_ops variables 2015-08-03 18:35:09 +05:30
phy-pistachio-usb.c PHY: Add driver for Pistachio USB2.0 PHY 2015-06-21 21:53:38 +02:00
phy-pxa-28nm-hsic.c phy: add Marvell HSIC 28nm PHY 2015-06-09 12:20:30 -07:00
phy-pxa-28nm-usb2.c phy: Add Marvell USB 2.0 OTG 28nm PHY 2015-06-09 12:20:30 -07:00
phy-qcom-apq8064-sata.c phy: Constify struct phy_ops variables 2015-08-03 18:35:09 +05:30
phy-qcom-ipq806x-sata.c phy: Constify struct phy_ops variables 2015-08-03 18:35:09 +05:30
phy-qcom-ufs-i.h phy: Constify struct phy_ops variables 2015-08-03 18:35:09 +05:30
phy-qcom-ufs-qmp-14nm.c phy: Constify struct phy_ops variables 2015-08-03 18:35:09 +05:30
phy-qcom-ufs-qmp-14nm.h phy: qcom-ufs: add support for 14nm phy 2015-01-20 19:43:26 +01:00
phy-qcom-ufs-qmp-20nm.c phy: Constify struct phy_ops variables 2015-08-03 18:35:09 +05:30
phy-qcom-ufs-qmp-20nm.h phy: qcom-ufs: add support for 20nm phy 2015-01-20 19:43:25 +01:00
phy-qcom-ufs.c phy: qcom-ufs: fix build error when the component is built as a module 2015-09-25 17:01:14 +05:30
phy-rcar-gen2.c locking/atomics, cmpxchg: Privatize the inclusion of asm/cmpxchg.h 2015-09-13 10:35:46 +02:00
phy-rcar-gen3-usb2.c phy: rcar-gen3-usb2: change the mode to OTG on the combined channel 2015-12-20 15:21:37 +05:30
phy-rockchip-usb.c phy: rockchip-usb: add missing of_node_put 2015-12-03 12:28:23 +05:30
phy-s5pv210-usb2.c phy: Add support for S5PV210 to the Exynos USB 2.0 PHY driver 2014-07-19 04:25:09 +09:00
phy-samsung-usb2.c phy: exynos-usb2: add vbus regulator support 2015-10-06 20:21:47 +05:30
phy-samsung-usb2.h phy: exynos-usb2: add vbus regulator support 2015-10-06 20:21:47 +05:30
phy-spear1310-miphy.c phy: Constify struct phy_ops variables 2015-08-03 18:35:09 +05:30
phy-spear1340-miphy.c phy: Constify struct phy_ops variables 2015-08-03 18:35:09 +05:30
phy-stih41x-usb.c phy: Constify struct phy_ops variables 2015-08-03 18:35:09 +05:30
phy-stih407-usb.c phy: phy-stih407-usb: Pass sysconfig register offsets via syscfg property. 2015-01-21 15:23:06 +05:30
phy-sun4i-usb.c phy: sun4i-usb: Use devm_gpiod_get_optional for optional GPIOs 2015-10-06 20:21:47 +05:30
phy-sun9i-usb.c phy: Constify struct phy_ops variables 2015-08-03 18:35:09 +05:30
phy-ti-pipe3.c phy: for 4.3 2015-08-14 16:45:51 -07:00
phy-tusb1210.c This is the bulk of GPIO changes for the v4.3 kernel cycle: 2015-09-04 10:07:45 -07:00
phy-twl4030-usb.c phy: twl4030-usb: remove incorrect pm_runtime_get_sync() in probe function. 2015-06-01 16:08:24 +05:30
phy-xgene.c New Features 2015-04-10 13:47:50 +02:00
ulpi_phy.h phy: ulpi_phy: Add const qualifier to ops 2015-08-03 18:35:09 +05:30