mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-19 02:04:19 +08:00
5f991a921a
If no channels are enabled when we run generic_buffer on a device, add a command-line option to just enable all of them, run the sampling and disable them all again afterwards. This is extremely useful when I'm low-level testing my sensors with interrupts and triggers, sample session: root@Ux500:/ lsiio Device 000: lsm303dlh_accel Device 001: lis331dl_accel Device 002: l3g4200d Device 003: lsm303dlh_magn Device 004: lps001wp Trigger 000: lsm303dlh_accel-trigger Trigger 001: lis331dl_accel-trigger Trigger 002: l3g4200d-trigger root@Ux500:/ generic_buffer -a -c 10 -n l3g4200d iio device number being used is 2 iio trigger number being used is 2 No channels are enabled, enabling all channels Enabling: in_anglvel_x_en Enabling: in_anglvel_y_en Enabling: in_anglvel_z_en Enabling: in_timestamp_en /sys/bus/iio/devices/iio:device2 l3g4200d-trigger -3.593664 -0.713133 4.870143 946684863662292480 3.225546 0.867357 -4.945878 946684863671875000 -0.676413 0.127296 0.106641 946684863681488037 -0.661113 0.110160 0.128826 946684863690673828 -0.664173 0.113067 0.123471 946684863700683593 -0.664938 0.109395 0.124848 946684863710144042 -0.664173 0.110619 0.130203 946684863719512939 -0.666162 0.111231 0.132651 946684863729125976 -0.668610 0.111690 0.130662 946684863738739013 -0.660501 0.110466 0.131733 946684863748565673 Disabling: in_anglvel_x_en Disabling: in_anglvel_y_en Disabling: in_anglvel_z_en Disabling: in_timestamp_en Pure awesomeness. If some channels have been enabled through scripts or manual interaction, nothing happens. Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Acked-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
582 lines
14 KiB
C
582 lines
14 KiB
C
/* Industrialio buffer test code.
|
|
*
|
|
* Copyright (c) 2008 Jonathan Cameron
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published by
|
|
* the Free Software Foundation.
|
|
*
|
|
* This program is primarily intended as an example application.
|
|
* Reads the current buffer setup from sysfs and starts a short capture
|
|
* from the specified device, pretty printing the result after appropriate
|
|
* conversion.
|
|
*
|
|
* Command line parameters
|
|
* generic_buffer -n <device_name> -t <trigger_name>
|
|
* If trigger name is not specified the program assumes you want a dataready
|
|
* trigger associated with the device and goes looking for it.
|
|
*
|
|
*/
|
|
|
|
#include <unistd.h>
|
|
#include <stdlib.h>
|
|
#include <dirent.h>
|
|
#include <fcntl.h>
|
|
#include <stdio.h>
|
|
#include <errno.h>
|
|
#include <sys/stat.h>
|
|
#include <sys/dir.h>
|
|
#include <linux/types.h>
|
|
#include <string.h>
|
|
#include <poll.h>
|
|
#include <endian.h>
|
|
#include <getopt.h>
|
|
#include <inttypes.h>
|
|
#include "iio_utils.h"
|
|
|
|
/**
|
|
* enum autochan - state for the automatic channel enabling mechanism
|
|
*/
|
|
enum autochan {
|
|
AUTOCHANNELS_DISABLED,
|
|
AUTOCHANNELS_ENABLED,
|
|
AUTOCHANNELS_ACTIVE,
|
|
};
|
|
|
|
/**
|
|
* size_from_channelarray() - calculate the storage size of a scan
|
|
* @channels: the channel info array
|
|
* @num_channels: number of channels
|
|
*
|
|
* Has the side effect of filling the channels[i].location values used
|
|
* in processing the buffer output.
|
|
**/
|
|
int size_from_channelarray(struct iio_channel_info *channels, int num_channels)
|
|
{
|
|
int bytes = 0;
|
|
int i = 0;
|
|
|
|
while (i < num_channels) {
|
|
if (bytes % channels[i].bytes == 0)
|
|
channels[i].location = bytes;
|
|
else
|
|
channels[i].location = bytes - bytes % channels[i].bytes
|
|
+ channels[i].bytes;
|
|
|
|
bytes = channels[i].location + channels[i].bytes;
|
|
i++;
|
|
}
|
|
|
|
return bytes;
|
|
}
|
|
|
|
void print1byte(uint8_t input, struct iio_channel_info *info)
|
|
{
|
|
/*
|
|
* Shift before conversion to avoid sign extension
|
|
* of left aligned data
|
|
*/
|
|
input >>= info->shift;
|
|
input &= info->mask;
|
|
if (info->is_signed) {
|
|
int8_t val = (int8_t)(input << (8 - info->bits_used)) >>
|
|
(8 - info->bits_used);
|
|
printf("%05f ", ((float)val + info->offset) * info->scale);
|
|
} else {
|
|
printf("%05f ", ((float)input + info->offset) * info->scale);
|
|
}
|
|
}
|
|
|
|
void print2byte(uint16_t input, struct iio_channel_info *info)
|
|
{
|
|
/* First swap if incorrect endian */
|
|
if (info->be)
|
|
input = be16toh(input);
|
|
else
|
|
input = le16toh(input);
|
|
|
|
/*
|
|
* Shift before conversion to avoid sign extension
|
|
* of left aligned data
|
|
*/
|
|
input >>= info->shift;
|
|
input &= info->mask;
|
|
if (info->is_signed) {
|
|
int16_t val = (int16_t)(input << (16 - info->bits_used)) >>
|
|
(16 - info->bits_used);
|
|
printf("%05f ", ((float)val + info->offset) * info->scale);
|
|
} else {
|
|
printf("%05f ", ((float)input + info->offset) * info->scale);
|
|
}
|
|
}
|
|
|
|
void print4byte(uint32_t input, struct iio_channel_info *info)
|
|
{
|
|
/* First swap if incorrect endian */
|
|
if (info->be)
|
|
input = be32toh(input);
|
|
else
|
|
input = le32toh(input);
|
|
|
|
/*
|
|
* Shift before conversion to avoid sign extension
|
|
* of left aligned data
|
|
*/
|
|
input >>= info->shift;
|
|
input &= info->mask;
|
|
if (info->is_signed) {
|
|
int32_t val = (int32_t)(input << (32 - info->bits_used)) >>
|
|
(32 - info->bits_used);
|
|
printf("%05f ", ((float)val + info->offset) * info->scale);
|
|
} else {
|
|
printf("%05f ", ((float)input + info->offset) * info->scale);
|
|
}
|
|
}
|
|
|
|
void print8byte(uint64_t input, struct iio_channel_info *info)
|
|
{
|
|
/* First swap if incorrect endian */
|
|
if (info->be)
|
|
input = be64toh(input);
|
|
else
|
|
input = le64toh(input);
|
|
|
|
/*
|
|
* Shift before conversion to avoid sign extension
|
|
* of left aligned data
|
|
*/
|
|
input >>= info->shift;
|
|
input &= info->mask;
|
|
if (info->is_signed) {
|
|
int64_t val = (int64_t)(input << (64 - info->bits_used)) >>
|
|
(64 - info->bits_used);
|
|
/* special case for timestamp */
|
|
if (info->scale == 1.0f && info->offset == 0.0f)
|
|
printf("%" PRId64 " ", val);
|
|
else
|
|
printf("%05f ",
|
|
((float)val + info->offset) * info->scale);
|
|
} else {
|
|
printf("%05f ", ((float)input + info->offset) * info->scale);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* process_scan() - print out the values in SI units
|
|
* @data: pointer to the start of the scan
|
|
* @channels: information about the channels.
|
|
* Note: size_from_channelarray must have been called first
|
|
* to fill the location offsets.
|
|
* @num_channels: number of channels
|
|
**/
|
|
void process_scan(char *data,
|
|
struct iio_channel_info *channels,
|
|
int num_channels)
|
|
{
|
|
int k;
|
|
|
|
for (k = 0; k < num_channels; k++)
|
|
switch (channels[k].bytes) {
|
|
/* only a few cases implemented so far */
|
|
case 1:
|
|
print1byte(*(uint8_t *)(data + channels[k].location),
|
|
&channels[k]);
|
|
break;
|
|
case 2:
|
|
print2byte(*(uint16_t *)(data + channels[k].location),
|
|
&channels[k]);
|
|
break;
|
|
case 4:
|
|
print4byte(*(uint32_t *)(data + channels[k].location),
|
|
&channels[k]);
|
|
break;
|
|
case 8:
|
|
print8byte(*(uint64_t *)(data + channels[k].location),
|
|
&channels[k]);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
printf("\n");
|
|
}
|
|
|
|
static int enable_disable_all_channels(char *dev_dir_name, int enable)
|
|
{
|
|
const struct dirent *ent;
|
|
char scanelemdir[256];
|
|
DIR *dp;
|
|
int ret;
|
|
|
|
snprintf(scanelemdir, sizeof(scanelemdir),
|
|
FORMAT_SCAN_ELEMENTS_DIR, dev_dir_name);
|
|
scanelemdir[sizeof(scanelemdir)-1] = '\0';
|
|
|
|
dp = opendir(scanelemdir);
|
|
if (!dp) {
|
|
fprintf(stderr, "Enabling/disabling channels: can't open %s\n",
|
|
scanelemdir);
|
|
return -EIO;
|
|
}
|
|
|
|
ret = -ENOENT;
|
|
while (ent = readdir(dp), ent) {
|
|
if (iioutils_check_suffix(ent->d_name, "_en")) {
|
|
printf("%sabling: %s\n",
|
|
enable ? "En" : "Dis",
|
|
ent->d_name);
|
|
ret = write_sysfs_int(ent->d_name, scanelemdir,
|
|
enable);
|
|
if (ret < 0)
|
|
fprintf(stderr, "Failed to enable/disable %s\n",
|
|
ent->d_name);
|
|
}
|
|
}
|
|
|
|
if (closedir(dp) == -1) {
|
|
perror("Enabling/disabling channels: "
|
|
"Failed to close directory");
|
|
return -errno;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
void print_usage(void)
|
|
{
|
|
fprintf(stderr, "Usage: generic_buffer [options]...\n"
|
|
"Capture, convert and output data from IIO device buffer\n"
|
|
" -a Auto-activate all available channels\n"
|
|
" -c <n> Do n conversions\n"
|
|
" -e Disable wait for event (new data)\n"
|
|
" -g Use trigger-less mode\n"
|
|
" -l <n> Set buffer length to n samples\n"
|
|
" -n <name> Set device name (mandatory)\n"
|
|
" -t <name> Set trigger name\n"
|
|
" -w <n> Set delay between reads in us (event-less mode)\n");
|
|
}
|
|
|
|
int main(int argc, char **argv)
|
|
{
|
|
unsigned long num_loops = 2;
|
|
unsigned long timedelay = 1000000;
|
|
unsigned long buf_len = 128;
|
|
|
|
int ret, c, i, j, toread;
|
|
int fp;
|
|
|
|
int num_channels;
|
|
char *trigger_name = NULL, *device_name = NULL;
|
|
char *dev_dir_name, *buf_dir_name;
|
|
|
|
int datardytrigger = 1;
|
|
char *data;
|
|
ssize_t read_size;
|
|
int dev_num, trig_num;
|
|
char *buffer_access;
|
|
int scan_size;
|
|
int noevents = 0;
|
|
int notrigger = 0;
|
|
enum autochan autochannels = AUTOCHANNELS_DISABLED;
|
|
char *dummy;
|
|
|
|
struct iio_channel_info *channels;
|
|
|
|
while ((c = getopt(argc, argv, "ac:egl:n:t:w:")) != -1) {
|
|
switch (c) {
|
|
case 'a':
|
|
autochannels = AUTOCHANNELS_ENABLED;
|
|
break;
|
|
case 'c':
|
|
errno = 0;
|
|
num_loops = strtoul(optarg, &dummy, 10);
|
|
if (errno)
|
|
return -errno;
|
|
|
|
break;
|
|
case 'e':
|
|
noevents = 1;
|
|
break;
|
|
case 'g':
|
|
notrigger = 1;
|
|
break;
|
|
case 'l':
|
|
errno = 0;
|
|
buf_len = strtoul(optarg, &dummy, 10);
|
|
if (errno)
|
|
return -errno;
|
|
|
|
break;
|
|
case 'n':
|
|
device_name = optarg;
|
|
break;
|
|
case 't':
|
|
trigger_name = optarg;
|
|
datardytrigger = 0;
|
|
break;
|
|
case 'w':
|
|
errno = 0;
|
|
timedelay = strtoul(optarg, &dummy, 10);
|
|
if (errno)
|
|
return -errno;
|
|
break;
|
|
case '?':
|
|
print_usage();
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
if (!device_name) {
|
|
fprintf(stderr, "Device name not set\n");
|
|
print_usage();
|
|
return -1;
|
|
}
|
|
|
|
/* Find the device requested */
|
|
dev_num = find_type_by_name(device_name, "iio:device");
|
|
if (dev_num < 0) {
|
|
fprintf(stderr, "Failed to find the %s\n", device_name);
|
|
return dev_num;
|
|
}
|
|
|
|
printf("iio device number being used is %d\n", dev_num);
|
|
|
|
ret = asprintf(&dev_dir_name, "%siio:device%d", iio_dir, dev_num);
|
|
if (ret < 0)
|
|
return -ENOMEM;
|
|
|
|
if (!notrigger) {
|
|
if (!trigger_name) {
|
|
/*
|
|
* Build the trigger name. If it is device associated
|
|
* its name is <device_name>_dev[n] where n matches
|
|
* the device number found above.
|
|
*/
|
|
ret = asprintf(&trigger_name,
|
|
"%s-dev%d", device_name, dev_num);
|
|
if (ret < 0) {
|
|
ret = -ENOMEM;
|
|
goto error_free_dev_dir_name;
|
|
}
|
|
}
|
|
|
|
/* Look for this "-devN" trigger */
|
|
trig_num = find_type_by_name(trigger_name, "trigger");
|
|
if (trig_num < 0) {
|
|
/* OK try the simpler "-trigger" suffix instead */
|
|
free(trigger_name);
|
|
ret = asprintf(&trigger_name,
|
|
"%s-trigger", device_name);
|
|
if (ret < 0) {
|
|
ret = -ENOMEM;
|
|
goto error_free_dev_dir_name;
|
|
}
|
|
}
|
|
|
|
trig_num = find_type_by_name(trigger_name, "trigger");
|
|
if (trig_num < 0) {
|
|
fprintf(stderr, "Failed to find the trigger %s\n",
|
|
trigger_name);
|
|
ret = trig_num;
|
|
goto error_free_triggername;
|
|
}
|
|
|
|
printf("iio trigger number being used is %d\n", trig_num);
|
|
} else {
|
|
printf("trigger-less mode selected\n");
|
|
}
|
|
|
|
/*
|
|
* Parse the files in scan_elements to identify what channels are
|
|
* present
|
|
*/
|
|
ret = build_channel_array(dev_dir_name, &channels, &num_channels);
|
|
if (ret) {
|
|
fprintf(stderr, "Problem reading scan element information\n"
|
|
"diag %s\n", dev_dir_name);
|
|
goto error_free_triggername;
|
|
}
|
|
if (num_channels && autochannels == AUTOCHANNELS_ENABLED) {
|
|
fprintf(stderr, "Auto-channels selected but some channels "
|
|
"are already activated in sysfs\n");
|
|
fprintf(stderr, "Proceeding without activating any channels\n");
|
|
}
|
|
|
|
if (!num_channels && autochannels == AUTOCHANNELS_ENABLED) {
|
|
fprintf(stderr,
|
|
"No channels are enabled, enabling all channels\n");
|
|
|
|
ret = enable_disable_all_channels(dev_dir_name, 1);
|
|
if (ret) {
|
|
fprintf(stderr, "Failed to enable all channels\n");
|
|
goto error_free_triggername;
|
|
}
|
|
|
|
/* This flags that we need to disable the channels again */
|
|
autochannels = AUTOCHANNELS_ACTIVE;
|
|
|
|
ret = build_channel_array(dev_dir_name, &channels,
|
|
&num_channels);
|
|
if (ret) {
|
|
fprintf(stderr, "Problem reading scan element "
|
|
"information\n"
|
|
"diag %s\n", dev_dir_name);
|
|
goto error_disable_channels;
|
|
}
|
|
if (!num_channels) {
|
|
fprintf(stderr, "Still no channels after "
|
|
"auto-enabling, giving up\n");
|
|
goto error_disable_channels;
|
|
}
|
|
}
|
|
|
|
if (!num_channels && autochannels == AUTOCHANNELS_DISABLED) {
|
|
fprintf(stderr,
|
|
"No channels are enabled, we have nothing to scan.\n");
|
|
fprintf(stderr, "Enable channels manually in "
|
|
FORMAT_SCAN_ELEMENTS_DIR
|
|
"/*_en or pass -a to autoenable channels and "
|
|
"try again.\n", dev_dir_name);
|
|
ret = -ENOENT;
|
|
goto error_free_triggername;
|
|
}
|
|
|
|
/*
|
|
* Construct the directory name for the associated buffer.
|
|
* As we know that the lis3l02dq has only one buffer this may
|
|
* be built rather than found.
|
|
*/
|
|
ret = asprintf(&buf_dir_name,
|
|
"%siio:device%d/buffer", iio_dir, dev_num);
|
|
if (ret < 0) {
|
|
ret = -ENOMEM;
|
|
goto error_free_channels;
|
|
}
|
|
|
|
if (!notrigger) {
|
|
printf("%s %s\n", dev_dir_name, trigger_name);
|
|
/*
|
|
* Set the device trigger to be the data ready trigger found
|
|
* above
|
|
*/
|
|
ret = write_sysfs_string_and_verify("trigger/current_trigger",
|
|
dev_dir_name,
|
|
trigger_name);
|
|
if (ret < 0) {
|
|
fprintf(stderr,
|
|
"Failed to write current_trigger file\n");
|
|
goto error_free_buf_dir_name;
|
|
}
|
|
}
|
|
|
|
/* Setup ring buffer parameters */
|
|
ret = write_sysfs_int("length", buf_dir_name, buf_len);
|
|
if (ret < 0)
|
|
goto error_free_buf_dir_name;
|
|
|
|
/* Enable the buffer */
|
|
ret = write_sysfs_int("enable", buf_dir_name, 1);
|
|
if (ret < 0) {
|
|
fprintf(stderr,
|
|
"Failed to enable buffer: %s\n", strerror(-ret));
|
|
goto error_free_buf_dir_name;
|
|
}
|
|
|
|
scan_size = size_from_channelarray(channels, num_channels);
|
|
data = malloc(scan_size * buf_len);
|
|
if (!data) {
|
|
ret = -ENOMEM;
|
|
goto error_free_buf_dir_name;
|
|
}
|
|
|
|
ret = asprintf(&buffer_access, "/dev/iio:device%d", dev_num);
|
|
if (ret < 0) {
|
|
ret = -ENOMEM;
|
|
goto error_free_data;
|
|
}
|
|
|
|
/* Attempt to open non blocking the access dev */
|
|
fp = open(buffer_access, O_RDONLY | O_NONBLOCK);
|
|
if (fp == -1) { /* TODO: If it isn't there make the node */
|
|
ret = -errno;
|
|
fprintf(stderr, "Failed to open %s\n", buffer_access);
|
|
goto error_free_buffer_access;
|
|
}
|
|
|
|
for (j = 0; j < num_loops; j++) {
|
|
if (!noevents) {
|
|
struct pollfd pfd = {
|
|
.fd = fp,
|
|
.events = POLLIN,
|
|
};
|
|
|
|
ret = poll(&pfd, 1, -1);
|
|
if (ret < 0) {
|
|
ret = -errno;
|
|
goto error_close_buffer_access;
|
|
} else if (ret == 0) {
|
|
continue;
|
|
}
|
|
|
|
toread = buf_len;
|
|
} else {
|
|
usleep(timedelay);
|
|
toread = 64;
|
|
}
|
|
|
|
read_size = read(fp, data, toread * scan_size);
|
|
if (read_size < 0) {
|
|
if (errno == EAGAIN) {
|
|
fprintf(stderr, "nothing available\n");
|
|
continue;
|
|
} else {
|
|
break;
|
|
}
|
|
}
|
|
for (i = 0; i < read_size / scan_size; i++)
|
|
process_scan(data + scan_size * i, channels,
|
|
num_channels);
|
|
}
|
|
|
|
/* Stop the buffer */
|
|
ret = write_sysfs_int("enable", buf_dir_name, 0);
|
|
if (ret < 0)
|
|
goto error_close_buffer_access;
|
|
|
|
if (!notrigger)
|
|
/* Disconnect the trigger - just write a dummy name. */
|
|
ret = write_sysfs_string("trigger/current_trigger",
|
|
dev_dir_name, "NULL");
|
|
if (ret < 0)
|
|
fprintf(stderr, "Failed to write to %s\n",
|
|
dev_dir_name);
|
|
|
|
error_close_buffer_access:
|
|
if (close(fp) == -1)
|
|
perror("Failed to close buffer");
|
|
|
|
error_free_buffer_access:
|
|
free(buffer_access);
|
|
error_free_data:
|
|
free(data);
|
|
error_free_buf_dir_name:
|
|
free(buf_dir_name);
|
|
error_free_channels:
|
|
for (i = num_channels - 1; i >= 0; i--) {
|
|
free(channels[i].name);
|
|
free(channels[i].generic_name);
|
|
}
|
|
free(channels);
|
|
error_free_triggername:
|
|
if (datardytrigger)
|
|
free(trigger_name);
|
|
error_disable_channels:
|
|
if (autochannels == AUTOCHANNELS_ACTIVE) {
|
|
ret = enable_disable_all_channels(dev_dir_name, 0);
|
|
if (ret)
|
|
fprintf(stderr, "Failed to disable all channels\n");
|
|
}
|
|
error_free_dev_dir_name:
|
|
free(dev_dir_name);
|
|
|
|
return ret;
|
|
}
|