mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-29 14:05:19 +08:00
d214109875
Now that the SPDX tag is in all USB files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. And there's unneeded stuff like the address (sometimes incorrect) for the FSF which is never needed. No copyright headers or other non-license-description text was removed. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
382 lines
9.0 KiB
C
382 lines
9.0 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* drivers/usb/host/ehci-orion.c
|
|
*
|
|
* Tzachi Perelstein <tzachi@marvell.com>
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/mbus.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/platform_data/usb-ehci-orion.h>
|
|
#include <linux/of.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/usb/hcd.h>
|
|
#include <linux/io.h>
|
|
#include <linux/dma-mapping.h>
|
|
|
|
#include "ehci.h"
|
|
|
|
#define rdl(off) readl_relaxed(hcd->regs + (off))
|
|
#define wrl(off, val) writel_relaxed((val), hcd->regs + (off))
|
|
|
|
#define USB_CMD 0x140
|
|
#define USB_CMD_RUN BIT(0)
|
|
#define USB_CMD_RESET BIT(1)
|
|
#define USB_MODE 0x1a8
|
|
#define USB_MODE_MASK GENMASK(1, 0)
|
|
#define USB_MODE_DEVICE 0x2
|
|
#define USB_MODE_HOST 0x3
|
|
#define USB_MODE_SDIS BIT(4)
|
|
#define USB_CAUSE 0x310
|
|
#define USB_MASK 0x314
|
|
#define USB_WINDOW_CTRL(i) (0x320 + ((i) << 4))
|
|
#define USB_WINDOW_BASE(i) (0x324 + ((i) << 4))
|
|
#define USB_IPG 0x360
|
|
#define USB_PHY_PWR_CTRL 0x400
|
|
#define USB_PHY_TX_CTRL 0x420
|
|
#define USB_PHY_RX_CTRL 0x430
|
|
#define USB_PHY_IVREF_CTRL 0x440
|
|
#define USB_PHY_TST_GRP_CTRL 0x450
|
|
|
|
#define USB_SBUSCFG 0x90
|
|
|
|
/* BAWR = BARD = 3 : Align read/write bursts packets larger than 128 bytes */
|
|
#define USB_SBUSCFG_BAWR_ALIGN_128B (0x3 << 6)
|
|
#define USB_SBUSCFG_BARD_ALIGN_128B (0x3 << 3)
|
|
/* AHBBRST = 3 : Align AHB Burst to INCR16 (64 bytes) */
|
|
#define USB_SBUSCFG_AHBBRST_INCR16 (0x3 << 0)
|
|
|
|
#define USB_SBUSCFG_DEF_VAL (USB_SBUSCFG_BAWR_ALIGN_128B \
|
|
| USB_SBUSCFG_BARD_ALIGN_128B \
|
|
| USB_SBUSCFG_AHBBRST_INCR16)
|
|
|
|
#define DRIVER_DESC "EHCI orion driver"
|
|
|
|
#define hcd_to_orion_priv(h) ((struct orion_ehci_hcd *)hcd_to_ehci(h)->priv)
|
|
|
|
struct orion_ehci_hcd {
|
|
struct clk *clk;
|
|
struct phy *phy;
|
|
};
|
|
|
|
static const char hcd_name[] = "ehci-orion";
|
|
|
|
static struct hc_driver __read_mostly ehci_orion_hc_driver;
|
|
|
|
/*
|
|
* Implement Orion USB controller specification guidelines
|
|
*/
|
|
static void orion_usb_phy_v1_setup(struct usb_hcd *hcd)
|
|
{
|
|
/* The below GLs are according to the Orion Errata document */
|
|
/*
|
|
* Clear interrupt cause and mask
|
|
*/
|
|
wrl(USB_CAUSE, 0);
|
|
wrl(USB_MASK, 0);
|
|
|
|
/*
|
|
* Reset controller
|
|
*/
|
|
wrl(USB_CMD, rdl(USB_CMD) | USB_CMD_RESET);
|
|
while (rdl(USB_CMD) & USB_CMD_RESET);
|
|
|
|
/*
|
|
* GL# USB-10: Set IPG for non start of frame packets
|
|
* Bits[14:8]=0xc
|
|
*/
|
|
wrl(USB_IPG, (rdl(USB_IPG) & ~0x7f00) | 0xc00);
|
|
|
|
/*
|
|
* GL# USB-9: USB 2.0 Power Control
|
|
* BG_VSEL[7:6]=0x1
|
|
*/
|
|
wrl(USB_PHY_PWR_CTRL, (rdl(USB_PHY_PWR_CTRL) & ~0xc0)| 0x40);
|
|
|
|
/*
|
|
* GL# USB-1: USB PHY Tx Control - force calibration to '8'
|
|
* TXDATA_BLOCK_EN[21]=0x1, EXT_RCAL_EN[13]=0x1, IMP_CAL[6:3]=0x8
|
|
*/
|
|
wrl(USB_PHY_TX_CTRL, (rdl(USB_PHY_TX_CTRL) & ~0x78) | 0x202040);
|
|
|
|
/*
|
|
* GL# USB-3 GL# USB-9: USB PHY Rx Control
|
|
* RXDATA_BLOCK_LENGHT[31:30]=0x3, EDGE_DET_SEL[27:26]=0,
|
|
* CDR_FASTLOCK_EN[21]=0, DISCON_THRESHOLD[9:8]=0, SQ_THRESH[7:4]=0x1
|
|
*/
|
|
wrl(USB_PHY_RX_CTRL, (rdl(USB_PHY_RX_CTRL) & ~0xc2003f0) | 0xc0000010);
|
|
|
|
/*
|
|
* GL# USB-3 GL# USB-9: USB PHY IVREF Control
|
|
* PLLVDD12[1:0]=0x2, RXVDD[5:4]=0x3, Reserved[19]=0
|
|
*/
|
|
wrl(USB_PHY_IVREF_CTRL, (rdl(USB_PHY_IVREF_CTRL) & ~0x80003 ) | 0x32);
|
|
|
|
/*
|
|
* GL# USB-3 GL# USB-9: USB PHY Test Group Control
|
|
* REG_FIFO_SQ_RST[15]=0
|
|
*/
|
|
wrl(USB_PHY_TST_GRP_CTRL, rdl(USB_PHY_TST_GRP_CTRL) & ~0x8000);
|
|
|
|
/*
|
|
* Stop and reset controller
|
|
*/
|
|
wrl(USB_CMD, rdl(USB_CMD) & ~USB_CMD_RUN);
|
|
wrl(USB_CMD, rdl(USB_CMD) | USB_CMD_RESET);
|
|
while (rdl(USB_CMD) & USB_CMD_RESET);
|
|
|
|
/*
|
|
* GL# USB-5 Streaming disable REG_USB_MODE[4]=1
|
|
* TBD: This need to be done after each reset!
|
|
* GL# USB-4 Setup USB Host mode
|
|
*/
|
|
wrl(USB_MODE, USB_MODE_SDIS | USB_MODE_HOST);
|
|
}
|
|
|
|
static void
|
|
ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
|
|
const struct mbus_dram_target_info *dram)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
wrl(USB_WINDOW_CTRL(i), 0);
|
|
wrl(USB_WINDOW_BASE(i), 0);
|
|
}
|
|
|
|
for (i = 0; i < dram->num_cs; i++) {
|
|
const struct mbus_dram_window *cs = dram->cs + i;
|
|
|
|
wrl(USB_WINDOW_CTRL(i), ((cs->size - 1) & 0xffff0000) |
|
|
(cs->mbus_attr << 8) |
|
|
(dram->mbus_dram_target_id << 4) | 1);
|
|
wrl(USB_WINDOW_BASE(i), cs->base);
|
|
}
|
|
}
|
|
|
|
static int ehci_orion_drv_reset(struct usb_hcd *hcd)
|
|
{
|
|
struct device *dev = hcd->self.controller;
|
|
int ret;
|
|
|
|
ret = ehci_setup(hcd);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* For SoC without hlock, need to program sbuscfg value to guarantee
|
|
* AHB master's burst would not overrun or underrun FIFO.
|
|
*
|
|
* sbuscfg reg has to be set after usb controller reset, otherwise
|
|
* the value would be override to 0.
|
|
*/
|
|
if (of_device_is_compatible(dev->of_node, "marvell,armada-3700-ehci"))
|
|
wrl(USB_SBUSCFG, USB_SBUSCFG_DEF_VAL);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct ehci_driver_overrides orion_overrides __initconst = {
|
|
.extra_priv_size = sizeof(struct orion_ehci_hcd),
|
|
.reset = ehci_orion_drv_reset,
|
|
};
|
|
|
|
static int ehci_orion_drv_probe(struct platform_device *pdev)
|
|
{
|
|
struct orion_ehci_data *pd = dev_get_platdata(&pdev->dev);
|
|
const struct mbus_dram_target_info *dram;
|
|
struct resource *res;
|
|
struct usb_hcd *hcd;
|
|
struct ehci_hcd *ehci;
|
|
void __iomem *regs;
|
|
int irq, err;
|
|
enum orion_ehci_phy_ver phy_version;
|
|
struct orion_ehci_hcd *priv;
|
|
|
|
if (usb_disabled())
|
|
return -ENODEV;
|
|
|
|
pr_debug("Initializing Orion-SoC USB Host Controller\n");
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq <= 0) {
|
|
dev_err(&pdev->dev,
|
|
"Found HC with no IRQ. Check %s setup!\n",
|
|
dev_name(&pdev->dev));
|
|
err = -ENODEV;
|
|
goto err;
|
|
}
|
|
|
|
/*
|
|
* Right now device-tree probed devices don't get dma_mask
|
|
* set. Since shared usb code relies on it, set it here for
|
|
* now. Once we have dma capability bindings this can go away.
|
|
*/
|
|
err = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
|
|
if (err)
|
|
goto err;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
regs = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(regs)) {
|
|
err = PTR_ERR(regs);
|
|
goto err;
|
|
}
|
|
|
|
hcd = usb_create_hcd(&ehci_orion_hc_driver,
|
|
&pdev->dev, dev_name(&pdev->dev));
|
|
if (!hcd) {
|
|
err = -ENOMEM;
|
|
goto err;
|
|
}
|
|
|
|
hcd->rsrc_start = res->start;
|
|
hcd->rsrc_len = resource_size(res);
|
|
hcd->regs = regs;
|
|
|
|
ehci = hcd_to_ehci(hcd);
|
|
ehci->caps = hcd->regs + 0x100;
|
|
hcd->has_tt = 1;
|
|
|
|
priv = hcd_to_orion_priv(hcd);
|
|
/*
|
|
* Not all platforms can gate the clock, so it is not an error if
|
|
* the clock does not exists.
|
|
*/
|
|
priv->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (!IS_ERR(priv->clk))
|
|
clk_prepare_enable(priv->clk);
|
|
|
|
priv->phy = devm_phy_optional_get(&pdev->dev, "usb");
|
|
if (IS_ERR(priv->phy)) {
|
|
err = PTR_ERR(priv->phy);
|
|
if (err != -ENOSYS)
|
|
goto err_phy_get;
|
|
} else {
|
|
err = phy_init(priv->phy);
|
|
if (err)
|
|
goto err_phy_init;
|
|
|
|
err = phy_power_on(priv->phy);
|
|
if (err)
|
|
goto err_phy_power_on;
|
|
}
|
|
|
|
/*
|
|
* (Re-)program MBUS remapping windows if we are asked to.
|
|
*/
|
|
dram = mv_mbus_dram_info();
|
|
if (dram)
|
|
ehci_orion_conf_mbus_windows(hcd, dram);
|
|
|
|
/*
|
|
* setup Orion USB controller.
|
|
*/
|
|
if (pdev->dev.of_node)
|
|
phy_version = EHCI_PHY_NA;
|
|
else
|
|
phy_version = pd->phy_version;
|
|
|
|
switch (phy_version) {
|
|
case EHCI_PHY_NA: /* dont change USB phy settings */
|
|
break;
|
|
case EHCI_PHY_ORION:
|
|
orion_usb_phy_v1_setup(hcd);
|
|
break;
|
|
case EHCI_PHY_DD:
|
|
case EHCI_PHY_KW:
|
|
default:
|
|
dev_warn(&pdev->dev, "USB phy version isn't supported.\n");
|
|
}
|
|
|
|
err = usb_add_hcd(hcd, irq, IRQF_SHARED);
|
|
if (err)
|
|
goto err_add_hcd;
|
|
|
|
device_wakeup_enable(hcd->self.controller);
|
|
return 0;
|
|
|
|
err_add_hcd:
|
|
if (!IS_ERR(priv->phy))
|
|
phy_power_off(priv->phy);
|
|
err_phy_power_on:
|
|
if (!IS_ERR(priv->phy))
|
|
phy_exit(priv->phy);
|
|
err_phy_init:
|
|
err_phy_get:
|
|
if (!IS_ERR(priv->clk))
|
|
clk_disable_unprepare(priv->clk);
|
|
usb_put_hcd(hcd);
|
|
err:
|
|
dev_err(&pdev->dev, "init %s fail, %d\n",
|
|
dev_name(&pdev->dev), err);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int ehci_orion_drv_remove(struct platform_device *pdev)
|
|
{
|
|
struct usb_hcd *hcd = platform_get_drvdata(pdev);
|
|
struct orion_ehci_hcd *priv = hcd_to_orion_priv(hcd);
|
|
|
|
usb_remove_hcd(hcd);
|
|
|
|
if (!IS_ERR(priv->phy)) {
|
|
phy_power_off(priv->phy);
|
|
phy_exit(priv->phy);
|
|
}
|
|
|
|
if (!IS_ERR(priv->clk))
|
|
clk_disable_unprepare(priv->clk);
|
|
|
|
usb_put_hcd(hcd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id ehci_orion_dt_ids[] = {
|
|
{ .compatible = "marvell,orion-ehci", },
|
|
{ .compatible = "marvell,armada-3700-ehci", },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ehci_orion_dt_ids);
|
|
|
|
static struct platform_driver ehci_orion_driver = {
|
|
.probe = ehci_orion_drv_probe,
|
|
.remove = ehci_orion_drv_remove,
|
|
.shutdown = usb_hcd_platform_shutdown,
|
|
.driver = {
|
|
.name = "orion-ehci",
|
|
.of_match_table = ehci_orion_dt_ids,
|
|
},
|
|
};
|
|
|
|
static int __init ehci_orion_init(void)
|
|
{
|
|
if (usb_disabled())
|
|
return -ENODEV;
|
|
|
|
pr_info("%s: " DRIVER_DESC "\n", hcd_name);
|
|
|
|
ehci_init_driver(&ehci_orion_hc_driver, &orion_overrides);
|
|
return platform_driver_register(&ehci_orion_driver);
|
|
}
|
|
module_init(ehci_orion_init);
|
|
|
|
static void __exit ehci_orion_cleanup(void)
|
|
{
|
|
platform_driver_unregister(&ehci_orion_driver);
|
|
}
|
|
module_exit(ehci_orion_cleanup);
|
|
|
|
MODULE_DESCRIPTION(DRIVER_DESC);
|
|
MODULE_ALIAS("platform:orion-ehci");
|
|
MODULE_AUTHOR("Tzachi Perelstein");
|
|
MODULE_LICENSE("GPL v2");
|