linux/net/batman-adv/bat_v.c
Linus Lüssing f89255a02f batman-adv: BATMAN_V: introduce per hard-iface OGMv2 queues
In preparation for the OGMv2 packet aggregation, hold OGMv2 packets for
up to BATADV_MAX_AGGREGATION_MS milliseconds (100ms) on per
hard-interface queues, before transmitting.

This allows us to later squash multiple OGMs into a single frame
and transmission for reduced overhead.

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-08-04 22:22:00 +02:00

1157 lines
30 KiB
C

// SPDX-License-Identifier: GPL-2.0
/* Copyright (C) 2013-2019 B.A.T.M.A.N. contributors:
*
* Linus Lüssing, Marek Lindner
*/
#include "bat_v.h"
#include "main.h"
#include <linux/atomic.h>
#include <linux/cache.h>
#include <linux/errno.h>
#include <linux/if_ether.h>
#include <linux/init.h>
#include <linux/jiffies.h>
#include <linux/kernel.h>
#include <linux/kref.h>
#include <linux/list.h>
#include <linux/netdevice.h>
#include <linux/netlink.h>
#include <linux/rculist.h>
#include <linux/rcupdate.h>
#include <linux/seq_file.h>
#include <linux/skbuff.h>
#include <linux/spinlock.h>
#include <linux/stddef.h>
#include <linux/types.h>
#include <linux/workqueue.h>
#include <net/genetlink.h>
#include <net/netlink.h>
#include <uapi/linux/batadv_packet.h>
#include <uapi/linux/batman_adv.h>
#include "bat_algo.h"
#include "bat_v_elp.h"
#include "bat_v_ogm.h"
#include "gateway_client.h"
#include "gateway_common.h"
#include "hard-interface.h"
#include "hash.h"
#include "log.h"
#include "netlink.h"
#include "originator.h"
static void batadv_v_iface_activate(struct batadv_hard_iface *hard_iface)
{
struct batadv_priv *bat_priv = netdev_priv(hard_iface->soft_iface);
struct batadv_hard_iface *primary_if;
primary_if = batadv_primary_if_get_selected(bat_priv);
if (primary_if) {
batadv_v_elp_iface_activate(primary_if, hard_iface);
batadv_hardif_put(primary_if);
}
/* B.A.T.M.A.N. V does not use any queuing mechanism, therefore it can
* set the interface as ACTIVE right away, without any risk of race
* condition
*/
if (hard_iface->if_status == BATADV_IF_TO_BE_ACTIVATED)
hard_iface->if_status = BATADV_IF_ACTIVE;
}
static int batadv_v_iface_enable(struct batadv_hard_iface *hard_iface)
{
int ret;
ret = batadv_v_elp_iface_enable(hard_iface);
if (ret < 0)
return ret;
ret = batadv_v_ogm_iface_enable(hard_iface);
if (ret < 0)
batadv_v_elp_iface_disable(hard_iface);
return ret;
}
static void batadv_v_iface_disable(struct batadv_hard_iface *hard_iface)
{
batadv_v_ogm_iface_disable(hard_iface);
batadv_v_elp_iface_disable(hard_iface);
}
static void batadv_v_primary_iface_set(struct batadv_hard_iface *hard_iface)
{
batadv_v_elp_primary_iface_set(hard_iface);
batadv_v_ogm_primary_iface_set(hard_iface);
}
/**
* batadv_v_iface_update_mac() - react to hard-interface MAC address change
* @hard_iface: the modified interface
*
* If the modified interface is the primary one, update the originator
* address in the ELP and OGM messages to reflect the new MAC address.
*/
static void batadv_v_iface_update_mac(struct batadv_hard_iface *hard_iface)
{
struct batadv_priv *bat_priv = netdev_priv(hard_iface->soft_iface);
struct batadv_hard_iface *primary_if;
primary_if = batadv_primary_if_get_selected(bat_priv);
if (primary_if != hard_iface)
goto out;
batadv_v_primary_iface_set(hard_iface);
out:
if (primary_if)
batadv_hardif_put(primary_if);
}
static void
batadv_v_hardif_neigh_init(struct batadv_hardif_neigh_node *hardif_neigh)
{
ewma_throughput_init(&hardif_neigh->bat_v.throughput);
INIT_WORK(&hardif_neigh->bat_v.metric_work,
batadv_v_elp_throughput_metric_update);
}
#ifdef CONFIG_BATMAN_ADV_DEBUGFS
/**
* batadv_v_orig_print_neigh() - print neighbors for the originator table
* @orig_node: the orig_node for which the neighbors are printed
* @if_outgoing: outgoing interface for these entries
* @seq: debugfs table seq_file struct
*
* Must be called while holding an rcu lock.
*/
static void
batadv_v_orig_print_neigh(struct batadv_orig_node *orig_node,
struct batadv_hard_iface *if_outgoing,
struct seq_file *seq)
{
struct batadv_neigh_node *neigh_node;
struct batadv_neigh_ifinfo *n_ifinfo;
hlist_for_each_entry_rcu(neigh_node, &orig_node->neigh_list, list) {
n_ifinfo = batadv_neigh_ifinfo_get(neigh_node, if_outgoing);
if (!n_ifinfo)
continue;
seq_printf(seq, " %pM (%9u.%1u)",
neigh_node->addr,
n_ifinfo->bat_v.throughput / 10,
n_ifinfo->bat_v.throughput % 10);
batadv_neigh_ifinfo_put(n_ifinfo);
}
}
/**
* batadv_v_hardif_neigh_print() - print a single ELP neighbour node
* @seq: neighbour table seq_file struct
* @hardif_neigh: hardif neighbour information
*/
static void
batadv_v_hardif_neigh_print(struct seq_file *seq,
struct batadv_hardif_neigh_node *hardif_neigh)
{
int last_secs, last_msecs;
u32 throughput;
last_secs = jiffies_to_msecs(jiffies - hardif_neigh->last_seen) / 1000;
last_msecs = jiffies_to_msecs(jiffies - hardif_neigh->last_seen) % 1000;
throughput = ewma_throughput_read(&hardif_neigh->bat_v.throughput);
seq_printf(seq, "%pM %4i.%03is (%9u.%1u) [%10s]\n",
hardif_neigh->addr, last_secs, last_msecs, throughput / 10,
throughput % 10, hardif_neigh->if_incoming->net_dev->name);
}
/**
* batadv_v_neigh_print() - print the single hop neighbour list
* @bat_priv: the bat priv with all the soft interface information
* @seq: neighbour table seq_file struct
*/
static void batadv_v_neigh_print(struct batadv_priv *bat_priv,
struct seq_file *seq)
{
struct net_device *net_dev = (struct net_device *)seq->private;
struct batadv_hardif_neigh_node *hardif_neigh;
struct batadv_hard_iface *hard_iface;
int batman_count = 0;
seq_puts(seq,
" Neighbor last-seen ( throughput) [ IF]\n");
rcu_read_lock();
list_for_each_entry_rcu(hard_iface, &batadv_hardif_list, list) {
if (hard_iface->soft_iface != net_dev)
continue;
hlist_for_each_entry_rcu(hardif_neigh,
&hard_iface->neigh_list, list) {
batadv_v_hardif_neigh_print(seq, hardif_neigh);
batman_count++;
}
}
rcu_read_unlock();
if (batman_count == 0)
seq_puts(seq, "No batman nodes in range ...\n");
}
#endif
/**
* batadv_v_neigh_dump_neigh() - Dump a neighbour into a message
* @msg: Netlink message to dump into
* @portid: Port making netlink request
* @seq: Sequence number of netlink message
* @hardif_neigh: Neighbour to dump
*
* Return: Error code, or 0 on success
*/
static int
batadv_v_neigh_dump_neigh(struct sk_buff *msg, u32 portid, u32 seq,
struct batadv_hardif_neigh_node *hardif_neigh)
{
void *hdr;
unsigned int last_seen_msecs;
u32 throughput;
last_seen_msecs = jiffies_to_msecs(jiffies - hardif_neigh->last_seen);
throughput = ewma_throughput_read(&hardif_neigh->bat_v.throughput);
throughput = throughput * 100;
hdr = genlmsg_put(msg, portid, seq, &batadv_netlink_family, NLM_F_MULTI,
BATADV_CMD_GET_NEIGHBORS);
if (!hdr)
return -ENOBUFS;
if (nla_put(msg, BATADV_ATTR_NEIGH_ADDRESS, ETH_ALEN,
hardif_neigh->addr) ||
nla_put_u32(msg, BATADV_ATTR_HARD_IFINDEX,
hardif_neigh->if_incoming->net_dev->ifindex) ||
nla_put_u32(msg, BATADV_ATTR_LAST_SEEN_MSECS,
last_seen_msecs) ||
nla_put_u32(msg, BATADV_ATTR_THROUGHPUT, throughput))
goto nla_put_failure;
genlmsg_end(msg, hdr);
return 0;
nla_put_failure:
genlmsg_cancel(msg, hdr);
return -EMSGSIZE;
}
/**
* batadv_v_neigh_dump_hardif() - Dump the neighbours of a hard interface into
* a message
* @msg: Netlink message to dump into
* @portid: Port making netlink request
* @seq: Sequence number of netlink message
* @bat_priv: The bat priv with all the soft interface information
* @hard_iface: The hard interface to be dumped
* @idx_s: Entries to be skipped
*
* This function assumes the caller holds rcu_read_lock().
*
* Return: Error code, or 0 on success
*/
static int
batadv_v_neigh_dump_hardif(struct sk_buff *msg, u32 portid, u32 seq,
struct batadv_priv *bat_priv,
struct batadv_hard_iface *hard_iface,
int *idx_s)
{
struct batadv_hardif_neigh_node *hardif_neigh;
int idx = 0;
hlist_for_each_entry_rcu(hardif_neigh,
&hard_iface->neigh_list, list) {
if (idx++ < *idx_s)
continue;
if (batadv_v_neigh_dump_neigh(msg, portid, seq, hardif_neigh)) {
*idx_s = idx - 1;
return -EMSGSIZE;
}
}
*idx_s = 0;
return 0;
}
/**
* batadv_v_neigh_dump() - Dump the neighbours of a hard interface into a
* message
* @msg: Netlink message to dump into
* @cb: Control block containing additional options
* @bat_priv: The bat priv with all the soft interface information
* @single_hardif: Limit dumping to this hard interface
*/
static void
batadv_v_neigh_dump(struct sk_buff *msg, struct netlink_callback *cb,
struct batadv_priv *bat_priv,
struct batadv_hard_iface *single_hardif)
{
struct batadv_hard_iface *hard_iface;
int i_hardif = 0;
int i_hardif_s = cb->args[0];
int idx = cb->args[1];
int portid = NETLINK_CB(cb->skb).portid;
rcu_read_lock();
if (single_hardif) {
if (i_hardif_s == 0) {
if (batadv_v_neigh_dump_hardif(msg, portid,
cb->nlh->nlmsg_seq,
bat_priv, single_hardif,
&idx) == 0)
i_hardif++;
}
} else {
list_for_each_entry_rcu(hard_iface, &batadv_hardif_list, list) {
if (hard_iface->soft_iface != bat_priv->soft_iface)
continue;
if (i_hardif++ < i_hardif_s)
continue;
if (batadv_v_neigh_dump_hardif(msg, portid,
cb->nlh->nlmsg_seq,
bat_priv, hard_iface,
&idx)) {
i_hardif--;
break;
}
}
}
rcu_read_unlock();
cb->args[0] = i_hardif;
cb->args[1] = idx;
}
#ifdef CONFIG_BATMAN_ADV_DEBUGFS
/**
* batadv_v_orig_print() - print the originator table
* @bat_priv: the bat priv with all the soft interface information
* @seq: debugfs table seq_file struct
* @if_outgoing: the outgoing interface for which this should be printed
*/
static void batadv_v_orig_print(struct batadv_priv *bat_priv,
struct seq_file *seq,
struct batadv_hard_iface *if_outgoing)
{
struct batadv_neigh_node *neigh_node;
struct batadv_hashtable *hash = bat_priv->orig_hash;
int last_seen_msecs, last_seen_secs;
struct batadv_orig_node *orig_node;
struct batadv_neigh_ifinfo *n_ifinfo;
unsigned long last_seen_jiffies;
struct hlist_head *head;
int batman_count = 0;
u32 i;
seq_puts(seq,
" Originator last-seen ( throughput) Nexthop [outgoingIF]: Potential nexthops ...\n");
for (i = 0; i < hash->size; i++) {
head = &hash->table[i];
rcu_read_lock();
hlist_for_each_entry_rcu(orig_node, head, hash_entry) {
neigh_node = batadv_orig_router_get(orig_node,
if_outgoing);
if (!neigh_node)
continue;
n_ifinfo = batadv_neigh_ifinfo_get(neigh_node,
if_outgoing);
if (!n_ifinfo)
goto next;
last_seen_jiffies = jiffies - orig_node->last_seen;
last_seen_msecs = jiffies_to_msecs(last_seen_jiffies);
last_seen_secs = last_seen_msecs / 1000;
last_seen_msecs = last_seen_msecs % 1000;
seq_printf(seq, "%pM %4i.%03is (%9u.%1u) %pM [%10s]:",
orig_node->orig, last_seen_secs,
last_seen_msecs,
n_ifinfo->bat_v.throughput / 10,
n_ifinfo->bat_v.throughput % 10,
neigh_node->addr,
neigh_node->if_incoming->net_dev->name);
batadv_v_orig_print_neigh(orig_node, if_outgoing, seq);
seq_putc(seq, '\n');
batman_count++;
next:
batadv_neigh_node_put(neigh_node);
if (n_ifinfo)
batadv_neigh_ifinfo_put(n_ifinfo);
}
rcu_read_unlock();
}
if (batman_count == 0)
seq_puts(seq, "No batman nodes in range ...\n");
}
#endif
/**
* batadv_v_orig_dump_subentry() - Dump an originator subentry into a message
* @msg: Netlink message to dump into
* @portid: Port making netlink request
* @seq: Sequence number of netlink message
* @bat_priv: The bat priv with all the soft interface information
* @if_outgoing: Limit dump to entries with this outgoing interface
* @orig_node: Originator to dump
* @neigh_node: Single hops neighbour
* @best: Is the best originator
*
* Return: Error code, or 0 on success
*/
static int
batadv_v_orig_dump_subentry(struct sk_buff *msg, u32 portid, u32 seq,
struct batadv_priv *bat_priv,
struct batadv_hard_iface *if_outgoing,
struct batadv_orig_node *orig_node,
struct batadv_neigh_node *neigh_node,
bool best)
{
struct batadv_neigh_ifinfo *n_ifinfo;
unsigned int last_seen_msecs;
u32 throughput;
void *hdr;
n_ifinfo = batadv_neigh_ifinfo_get(neigh_node, if_outgoing);
if (!n_ifinfo)
return 0;
throughput = n_ifinfo->bat_v.throughput * 100;
batadv_neigh_ifinfo_put(n_ifinfo);
last_seen_msecs = jiffies_to_msecs(jiffies - orig_node->last_seen);
if (if_outgoing != BATADV_IF_DEFAULT &&
if_outgoing != neigh_node->if_incoming)
return 0;
hdr = genlmsg_put(msg, portid, seq, &batadv_netlink_family, NLM_F_MULTI,
BATADV_CMD_GET_ORIGINATORS);
if (!hdr)
return -ENOBUFS;
if (nla_put(msg, BATADV_ATTR_ORIG_ADDRESS, ETH_ALEN, orig_node->orig) ||
nla_put(msg, BATADV_ATTR_NEIGH_ADDRESS, ETH_ALEN,
neigh_node->addr) ||
nla_put_u32(msg, BATADV_ATTR_HARD_IFINDEX,
neigh_node->if_incoming->net_dev->ifindex) ||
nla_put_u32(msg, BATADV_ATTR_THROUGHPUT, throughput) ||
nla_put_u32(msg, BATADV_ATTR_LAST_SEEN_MSECS,
last_seen_msecs))
goto nla_put_failure;
if (best && nla_put_flag(msg, BATADV_ATTR_FLAG_BEST))
goto nla_put_failure;
genlmsg_end(msg, hdr);
return 0;
nla_put_failure:
genlmsg_cancel(msg, hdr);
return -EMSGSIZE;
}
/**
* batadv_v_orig_dump_entry() - Dump an originator entry into a message
* @msg: Netlink message to dump into
* @portid: Port making netlink request
* @seq: Sequence number of netlink message
* @bat_priv: The bat priv with all the soft interface information
* @if_outgoing: Limit dump to entries with this outgoing interface
* @orig_node: Originator to dump
* @sub_s: Number of sub entries to skip
*
* This function assumes the caller holds rcu_read_lock().
*
* Return: Error code, or 0 on success
*/
static int
batadv_v_orig_dump_entry(struct sk_buff *msg, u32 portid, u32 seq,
struct batadv_priv *bat_priv,
struct batadv_hard_iface *if_outgoing,
struct batadv_orig_node *orig_node, int *sub_s)
{
struct batadv_neigh_node *neigh_node_best;
struct batadv_neigh_node *neigh_node;
int sub = 0;
bool best;
neigh_node_best = batadv_orig_router_get(orig_node, if_outgoing);
if (!neigh_node_best)
goto out;
hlist_for_each_entry_rcu(neigh_node, &orig_node->neigh_list, list) {
if (sub++ < *sub_s)
continue;
best = (neigh_node == neigh_node_best);
if (batadv_v_orig_dump_subentry(msg, portid, seq, bat_priv,
if_outgoing, orig_node,
neigh_node, best)) {
batadv_neigh_node_put(neigh_node_best);
*sub_s = sub - 1;
return -EMSGSIZE;
}
}
out:
if (neigh_node_best)
batadv_neigh_node_put(neigh_node_best);
*sub_s = 0;
return 0;
}
/**
* batadv_v_orig_dump_bucket() - Dump an originator bucket into a message
* @msg: Netlink message to dump into
* @portid: Port making netlink request
* @seq: Sequence number of netlink message
* @bat_priv: The bat priv with all the soft interface information
* @if_outgoing: Limit dump to entries with this outgoing interface
* @head: Bucket to be dumped
* @idx_s: Number of entries to be skipped
* @sub: Number of sub entries to be skipped
*
* Return: Error code, or 0 on success
*/
static int
batadv_v_orig_dump_bucket(struct sk_buff *msg, u32 portid, u32 seq,
struct batadv_priv *bat_priv,
struct batadv_hard_iface *if_outgoing,
struct hlist_head *head, int *idx_s, int *sub)
{
struct batadv_orig_node *orig_node;
int idx = 0;
rcu_read_lock();
hlist_for_each_entry_rcu(orig_node, head, hash_entry) {
if (idx++ < *idx_s)
continue;
if (batadv_v_orig_dump_entry(msg, portid, seq, bat_priv,
if_outgoing, orig_node, sub)) {
rcu_read_unlock();
*idx_s = idx - 1;
return -EMSGSIZE;
}
}
rcu_read_unlock();
*idx_s = 0;
*sub = 0;
return 0;
}
/**
* batadv_v_orig_dump() - Dump the originators into a message
* @msg: Netlink message to dump into
* @cb: Control block containing additional options
* @bat_priv: The bat priv with all the soft interface information
* @if_outgoing: Limit dump to entries with this outgoing interface
*/
static void
batadv_v_orig_dump(struct sk_buff *msg, struct netlink_callback *cb,
struct batadv_priv *bat_priv,
struct batadv_hard_iface *if_outgoing)
{
struct batadv_hashtable *hash = bat_priv->orig_hash;
struct hlist_head *head;
int bucket = cb->args[0];
int idx = cb->args[1];
int sub = cb->args[2];
int portid = NETLINK_CB(cb->skb).portid;
while (bucket < hash->size) {
head = &hash->table[bucket];
if (batadv_v_orig_dump_bucket(msg, portid,
cb->nlh->nlmsg_seq,
bat_priv, if_outgoing, head, &idx,
&sub))
break;
bucket++;
}
cb->args[0] = bucket;
cb->args[1] = idx;
cb->args[2] = sub;
}
static int batadv_v_neigh_cmp(struct batadv_neigh_node *neigh1,
struct batadv_hard_iface *if_outgoing1,
struct batadv_neigh_node *neigh2,
struct batadv_hard_iface *if_outgoing2)
{
struct batadv_neigh_ifinfo *ifinfo1, *ifinfo2;
int ret = 0;
ifinfo1 = batadv_neigh_ifinfo_get(neigh1, if_outgoing1);
if (!ifinfo1)
goto err_ifinfo1;
ifinfo2 = batadv_neigh_ifinfo_get(neigh2, if_outgoing2);
if (!ifinfo2)
goto err_ifinfo2;
ret = ifinfo1->bat_v.throughput - ifinfo2->bat_v.throughput;
batadv_neigh_ifinfo_put(ifinfo2);
err_ifinfo2:
batadv_neigh_ifinfo_put(ifinfo1);
err_ifinfo1:
return ret;
}
static bool batadv_v_neigh_is_sob(struct batadv_neigh_node *neigh1,
struct batadv_hard_iface *if_outgoing1,
struct batadv_neigh_node *neigh2,
struct batadv_hard_iface *if_outgoing2)
{
struct batadv_neigh_ifinfo *ifinfo1, *ifinfo2;
u32 threshold;
bool ret = false;
ifinfo1 = batadv_neigh_ifinfo_get(neigh1, if_outgoing1);
if (!ifinfo1)
goto err_ifinfo1;
ifinfo2 = batadv_neigh_ifinfo_get(neigh2, if_outgoing2);
if (!ifinfo2)
goto err_ifinfo2;
threshold = ifinfo1->bat_v.throughput / 4;
threshold = ifinfo1->bat_v.throughput - threshold;
ret = ifinfo2->bat_v.throughput > threshold;
batadv_neigh_ifinfo_put(ifinfo2);
err_ifinfo2:
batadv_neigh_ifinfo_put(ifinfo1);
err_ifinfo1:
return ret;
}
/**
* batadv_v_init_sel_class() - initialize GW selection class
* @bat_priv: the bat priv with all the soft interface information
*/
static void batadv_v_init_sel_class(struct batadv_priv *bat_priv)
{
/* set default throughput difference threshold to 5Mbps */
atomic_set(&bat_priv->gw.sel_class, 50);
}
static ssize_t batadv_v_store_sel_class(struct batadv_priv *bat_priv,
char *buff, size_t count)
{
u32 old_class, class;
if (!batadv_parse_throughput(bat_priv->soft_iface, buff,
"B.A.T.M.A.N. V GW selection class",
&class))
return -EINVAL;
old_class = atomic_read(&bat_priv->gw.sel_class);
atomic_set(&bat_priv->gw.sel_class, class);
if (old_class != class)
batadv_gw_reselect(bat_priv);
return count;
}
static ssize_t batadv_v_show_sel_class(struct batadv_priv *bat_priv, char *buff)
{
u32 class = atomic_read(&bat_priv->gw.sel_class);
return sprintf(buff, "%u.%u MBit\n", class / 10, class % 10);
}
/**
* batadv_v_gw_throughput_get() - retrieve the GW-bandwidth for a given GW
* @gw_node: the GW to retrieve the metric for
* @bw: the pointer where the metric will be stored. The metric is computed as
* the minimum between the GW advertised throughput and the path throughput to
* it in the mesh
*
* Return: 0 on success, -1 on failure
*/
static int batadv_v_gw_throughput_get(struct batadv_gw_node *gw_node, u32 *bw)
{
struct batadv_neigh_ifinfo *router_ifinfo = NULL;
struct batadv_orig_node *orig_node;
struct batadv_neigh_node *router;
int ret = -1;
orig_node = gw_node->orig_node;
router = batadv_orig_router_get(orig_node, BATADV_IF_DEFAULT);
if (!router)
goto out;
router_ifinfo = batadv_neigh_ifinfo_get(router, BATADV_IF_DEFAULT);
if (!router_ifinfo)
goto out;
/* the GW metric is computed as the minimum between the path throughput
* to reach the GW itself and the advertised bandwidth.
* This gives us an approximation of the effective throughput that the
* client can expect via this particular GW node
*/
*bw = router_ifinfo->bat_v.throughput;
*bw = min_t(u32, *bw, gw_node->bandwidth_down);
ret = 0;
out:
if (router)
batadv_neigh_node_put(router);
if (router_ifinfo)
batadv_neigh_ifinfo_put(router_ifinfo);
return ret;
}
/**
* batadv_v_gw_get_best_gw_node() - retrieve the best GW node
* @bat_priv: the bat priv with all the soft interface information
*
* Return: the GW node having the best GW-metric, NULL if no GW is known
*/
static struct batadv_gw_node *
batadv_v_gw_get_best_gw_node(struct batadv_priv *bat_priv)
{
struct batadv_gw_node *gw_node, *curr_gw = NULL;
u32 max_bw = 0, bw;
rcu_read_lock();
hlist_for_each_entry_rcu(gw_node, &bat_priv->gw.gateway_list, list) {
if (!kref_get_unless_zero(&gw_node->refcount))
continue;
if (batadv_v_gw_throughput_get(gw_node, &bw) < 0)
goto next;
if (curr_gw && bw <= max_bw)
goto next;
if (curr_gw)
batadv_gw_node_put(curr_gw);
curr_gw = gw_node;
kref_get(&curr_gw->refcount);
max_bw = bw;
next:
batadv_gw_node_put(gw_node);
}
rcu_read_unlock();
return curr_gw;
}
/**
* batadv_v_gw_is_eligible() - check if a originator would be selected as GW
* @bat_priv: the bat priv with all the soft interface information
* @curr_gw_orig: originator representing the currently selected GW
* @orig_node: the originator representing the new candidate
*
* Return: true if orig_node can be selected as current GW, false otherwise
*/
static bool batadv_v_gw_is_eligible(struct batadv_priv *bat_priv,
struct batadv_orig_node *curr_gw_orig,
struct batadv_orig_node *orig_node)
{
struct batadv_gw_node *curr_gw, *orig_gw = NULL;
u32 gw_throughput, orig_throughput, threshold;
bool ret = false;
threshold = atomic_read(&bat_priv->gw.sel_class);
curr_gw = batadv_gw_node_get(bat_priv, curr_gw_orig);
if (!curr_gw) {
ret = true;
goto out;
}
if (batadv_v_gw_throughput_get(curr_gw, &gw_throughput) < 0) {
ret = true;
goto out;
}
orig_gw = batadv_gw_node_get(bat_priv, orig_node);
if (!orig_gw)
goto out;
if (batadv_v_gw_throughput_get(orig_gw, &orig_throughput) < 0)
goto out;
if (orig_throughput < gw_throughput)
goto out;
if ((orig_throughput - gw_throughput) < threshold)
goto out;
batadv_dbg(BATADV_DBG_BATMAN, bat_priv,
"Restarting gateway selection: better gateway found (throughput curr: %u, throughput new: %u)\n",
gw_throughput, orig_throughput);
ret = true;
out:
if (curr_gw)
batadv_gw_node_put(curr_gw);
if (orig_gw)
batadv_gw_node_put(orig_gw);
return ret;
}
#ifdef CONFIG_BATMAN_ADV_DEBUGFS
/* fails if orig_node has no router */
static int batadv_v_gw_write_buffer_text(struct batadv_priv *bat_priv,
struct seq_file *seq,
const struct batadv_gw_node *gw_node)
{
struct batadv_gw_node *curr_gw;
struct batadv_neigh_node *router;
struct batadv_neigh_ifinfo *router_ifinfo = NULL;
int ret = -1;
router = batadv_orig_router_get(gw_node->orig_node, BATADV_IF_DEFAULT);
if (!router)
goto out;
router_ifinfo = batadv_neigh_ifinfo_get(router, BATADV_IF_DEFAULT);
if (!router_ifinfo)
goto out;
curr_gw = batadv_gw_get_selected_gw_node(bat_priv);
seq_printf(seq, "%s %pM (%9u.%1u) %pM [%10s]: %u.%u/%u.%u MBit\n",
(curr_gw == gw_node ? "=>" : " "),
gw_node->orig_node->orig,
router_ifinfo->bat_v.throughput / 10,
router_ifinfo->bat_v.throughput % 10, router->addr,
router->if_incoming->net_dev->name,
gw_node->bandwidth_down / 10,
gw_node->bandwidth_down % 10,
gw_node->bandwidth_up / 10,
gw_node->bandwidth_up % 10);
ret = seq_has_overflowed(seq) ? -1 : 0;
if (curr_gw)
batadv_gw_node_put(curr_gw);
out:
if (router_ifinfo)
batadv_neigh_ifinfo_put(router_ifinfo);
if (router)
batadv_neigh_node_put(router);
return ret;
}
/**
* batadv_v_gw_print() - print the gateway list
* @bat_priv: the bat priv with all the soft interface information
* @seq: gateway table seq_file struct
*/
static void batadv_v_gw_print(struct batadv_priv *bat_priv,
struct seq_file *seq)
{
struct batadv_gw_node *gw_node;
int gw_count = 0;
seq_puts(seq,
" Gateway ( throughput) Nexthop [outgoingIF]: advertised uplink bandwidth\n");
rcu_read_lock();
hlist_for_each_entry_rcu(gw_node, &bat_priv->gw.gateway_list, list) {
/* fails if orig_node has no router */
if (batadv_v_gw_write_buffer_text(bat_priv, seq, gw_node) < 0)
continue;
gw_count++;
}
rcu_read_unlock();
if (gw_count == 0)
seq_puts(seq, "No gateways in range ...\n");
}
#endif
/**
* batadv_v_gw_dump_entry() - Dump a gateway into a message
* @msg: Netlink message to dump into
* @portid: Port making netlink request
* @cb: Control block containing additional options
* @bat_priv: The bat priv with all the soft interface information
* @gw_node: Gateway to be dumped
*
* Return: Error code, or 0 on success
*/
static int batadv_v_gw_dump_entry(struct sk_buff *msg, u32 portid,
struct netlink_callback *cb,
struct batadv_priv *bat_priv,
struct batadv_gw_node *gw_node)
{
struct batadv_neigh_ifinfo *router_ifinfo = NULL;
struct batadv_neigh_node *router;
struct batadv_gw_node *curr_gw = NULL;
int ret = 0;
void *hdr;
router = batadv_orig_router_get(gw_node->orig_node, BATADV_IF_DEFAULT);
if (!router)
goto out;
router_ifinfo = batadv_neigh_ifinfo_get(router, BATADV_IF_DEFAULT);
if (!router_ifinfo)
goto out;
curr_gw = batadv_gw_get_selected_gw_node(bat_priv);
hdr = genlmsg_put(msg, portid, cb->nlh->nlmsg_seq,
&batadv_netlink_family, NLM_F_MULTI,
BATADV_CMD_GET_GATEWAYS);
if (!hdr) {
ret = -ENOBUFS;
goto out;
}
genl_dump_check_consistent(cb, hdr);
ret = -EMSGSIZE;
if (curr_gw == gw_node) {
if (nla_put_flag(msg, BATADV_ATTR_FLAG_BEST)) {
genlmsg_cancel(msg, hdr);
goto out;
}
}
if (nla_put(msg, BATADV_ATTR_ORIG_ADDRESS, ETH_ALEN,
gw_node->orig_node->orig)) {
genlmsg_cancel(msg, hdr);
goto out;
}
if (nla_put_u32(msg, BATADV_ATTR_THROUGHPUT,
router_ifinfo->bat_v.throughput)) {
genlmsg_cancel(msg, hdr);
goto out;
}
if (nla_put(msg, BATADV_ATTR_ROUTER, ETH_ALEN, router->addr)) {
genlmsg_cancel(msg, hdr);
goto out;
}
if (nla_put_string(msg, BATADV_ATTR_HARD_IFNAME,
router->if_incoming->net_dev->name)) {
genlmsg_cancel(msg, hdr);
goto out;
}
if (nla_put_u32(msg, BATADV_ATTR_BANDWIDTH_DOWN,
gw_node->bandwidth_down)) {
genlmsg_cancel(msg, hdr);
goto out;
}
if (nla_put_u32(msg, BATADV_ATTR_BANDWIDTH_UP, gw_node->bandwidth_up)) {
genlmsg_cancel(msg, hdr);
goto out;
}
genlmsg_end(msg, hdr);
ret = 0;
out:
if (curr_gw)
batadv_gw_node_put(curr_gw);
if (router_ifinfo)
batadv_neigh_ifinfo_put(router_ifinfo);
if (router)
batadv_neigh_node_put(router);
return ret;
}
/**
* batadv_v_gw_dump() - Dump gateways into a message
* @msg: Netlink message to dump into
* @cb: Control block containing additional options
* @bat_priv: The bat priv with all the soft interface information
*/
static void batadv_v_gw_dump(struct sk_buff *msg, struct netlink_callback *cb,
struct batadv_priv *bat_priv)
{
int portid = NETLINK_CB(cb->skb).portid;
struct batadv_gw_node *gw_node;
int idx_skip = cb->args[0];
int idx = 0;
spin_lock_bh(&bat_priv->gw.list_lock);
cb->seq = bat_priv->gw.generation << 1 | 1;
hlist_for_each_entry(gw_node, &bat_priv->gw.gateway_list, list) {
if (idx++ < idx_skip)
continue;
if (batadv_v_gw_dump_entry(msg, portid, cb, bat_priv,
gw_node)) {
idx_skip = idx - 1;
goto unlock;
}
}
idx_skip = idx;
unlock:
spin_unlock_bh(&bat_priv->gw.list_lock);
cb->args[0] = idx_skip;
}
static struct batadv_algo_ops batadv_batman_v __read_mostly = {
.name = "BATMAN_V",
.iface = {
.activate = batadv_v_iface_activate,
.enable = batadv_v_iface_enable,
.disable = batadv_v_iface_disable,
.update_mac = batadv_v_iface_update_mac,
.primary_set = batadv_v_primary_iface_set,
},
.neigh = {
.hardif_init = batadv_v_hardif_neigh_init,
.cmp = batadv_v_neigh_cmp,
.is_similar_or_better = batadv_v_neigh_is_sob,
#ifdef CONFIG_BATMAN_ADV_DEBUGFS
.print = batadv_v_neigh_print,
#endif
.dump = batadv_v_neigh_dump,
},
.orig = {
#ifdef CONFIG_BATMAN_ADV_DEBUGFS
.print = batadv_v_orig_print,
#endif
.dump = batadv_v_orig_dump,
},
.gw = {
.init_sel_class = batadv_v_init_sel_class,
.store_sel_class = batadv_v_store_sel_class,
.show_sel_class = batadv_v_show_sel_class,
.get_best_gw_node = batadv_v_gw_get_best_gw_node,
.is_eligible = batadv_v_gw_is_eligible,
#ifdef CONFIG_BATMAN_ADV_DEBUGFS
.print = batadv_v_gw_print,
#endif
.dump = batadv_v_gw_dump,
},
};
/**
* batadv_v_hardif_init() - initialize the algorithm specific fields in the
* hard-interface object
* @hard_iface: the hard-interface to initialize
*/
void batadv_v_hardif_init(struct batadv_hard_iface *hard_iface)
{
/* enable link throughput auto-detection by setting the throughput
* override to zero
*/
atomic_set(&hard_iface->bat_v.throughput_override, 0);
atomic_set(&hard_iface->bat_v.elp_interval, 500);
hard_iface->bat_v.aggr_len = 0;
skb_queue_head_init(&hard_iface->bat_v.aggr_list);
spin_lock_init(&hard_iface->bat_v.aggr_list_lock);
INIT_DELAYED_WORK(&hard_iface->bat_v.aggr_wq,
batadv_v_ogm_aggr_work);
}
/**
* batadv_v_mesh_init() - initialize the B.A.T.M.A.N. V private resources for a
* mesh
* @bat_priv: the object representing the mesh interface to initialise
*
* Return: 0 on success or a negative error code otherwise
*/
int batadv_v_mesh_init(struct batadv_priv *bat_priv)
{
int ret = 0;
ret = batadv_v_ogm_init(bat_priv);
if (ret < 0)
return ret;
return 0;
}
/**
* batadv_v_mesh_free() - free the B.A.T.M.A.N. V private resources for a mesh
* @bat_priv: the object representing the mesh interface to free
*/
void batadv_v_mesh_free(struct batadv_priv *bat_priv)
{
batadv_v_ogm_free(bat_priv);
}
/**
* batadv_v_init() - B.A.T.M.A.N. V initialization function
*
* Description: Takes care of initializing all the subcomponents.
* It is invoked upon module load only.
*
* Return: 0 on success or a negative error code otherwise
*/
int __init batadv_v_init(void)
{
int ret;
/* B.A.T.M.A.N. V echo location protocol packet */
ret = batadv_recv_handler_register(BATADV_ELP,
batadv_v_elp_packet_recv);
if (ret < 0)
return ret;
ret = batadv_recv_handler_register(BATADV_OGM2,
batadv_v_ogm_packet_recv);
if (ret < 0)
goto elp_unregister;
ret = batadv_algo_register(&batadv_batman_v);
if (ret < 0)
goto ogm_unregister;
return ret;
ogm_unregister:
batadv_recv_handler_unregister(BATADV_OGM2);
elp_unregister:
batadv_recv_handler_unregister(BATADV_ELP);
return ret;
}