mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-18 09:44:18 +08:00
1f9a30ec2a
* pci/aer: PCI/AER: Clear error status registers during enumeration and restore * pci/hotplug: PCI: pciehp: Queue power work requests in dedicated function * pci/misc: PCI: Turn off Request Attributes to avoid Chelsio T5 Completion erratum x86/PCI: Make pci_subsys_init() static PCI: Add builtin_pci_driver() to avoid registration boilerplate PCI: Remove unnecessary "if" statement * pci/msi: x86/PCI: Don't alloc pcibios-irq when MSI is enabled PCI/MSI: Export all remapped MSIs to sysfs attributes PCI: Disable MSI on SiS 761 * pci/resource: sparc/PCI: Add mem64 resource parsing for root bus PCI: Expand Enhanced Allocation BAR output PCI: Make Enhanced Allocation bitmasks more obvious PCI: Handle Enhanced Allocation capability for SR-IOV devices PCI: Add support for Enhanced Allocation devices PCI: Add Enhanced Allocation register entries PCI: Handle IORESOURCE_PCI_FIXED when assigning resources PCI: Handle IORESOURCE_PCI_FIXED when sizing resources PCI: Clear IORESOURCE_UNSET when reverting to firmware-assigned address * pci/virtualization: PCI: Fix sriov_enable() error path for pcibios_enable_sriov() failures PCI: Wait 1 second between disabling VFs and clearing NumVFs PCI: Reorder pcibios_sriov_disable() PCI: Remove VFs in reverse order if virtfn_add() fails PCI: Remove redundant validation of SR-IOV offset/stride registers PCI: Set SR-IOV NumVFs to zero after enumeration PCI: Enable SR-IOV ARI Capable Hierarchy before reading TotalVFs PCI: Don't try to restore VF BARs
766 lines
18 KiB
C
766 lines
18 KiB
C
/*
|
|
* drivers/pci/iov.c
|
|
*
|
|
* Copyright (C) 2009 Intel Corporation, Yu Zhao <yu.zhao@intel.com>
|
|
*
|
|
* PCI Express I/O Virtualization (IOV) support.
|
|
* Single Root IOV 1.0
|
|
* Address Translation Service 1.0
|
|
*/
|
|
|
|
#include <linux/pci.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/export.h>
|
|
#include <linux/string.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/pci-ats.h>
|
|
#include "pci.h"
|
|
|
|
#define VIRTFN_ID_LEN 16
|
|
|
|
int pci_iov_virtfn_bus(struct pci_dev *dev, int vf_id)
|
|
{
|
|
if (!dev->is_physfn)
|
|
return -EINVAL;
|
|
return dev->bus->number + ((dev->devfn + dev->sriov->offset +
|
|
dev->sriov->stride * vf_id) >> 8);
|
|
}
|
|
|
|
int pci_iov_virtfn_devfn(struct pci_dev *dev, int vf_id)
|
|
{
|
|
if (!dev->is_physfn)
|
|
return -EINVAL;
|
|
return (dev->devfn + dev->sriov->offset +
|
|
dev->sriov->stride * vf_id) & 0xff;
|
|
}
|
|
|
|
/*
|
|
* Per SR-IOV spec sec 3.3.10 and 3.3.11, First VF Offset and VF Stride may
|
|
* change when NumVFs changes.
|
|
*
|
|
* Update iov->offset and iov->stride when NumVFs is written.
|
|
*/
|
|
static inline void pci_iov_set_numvfs(struct pci_dev *dev, int nr_virtfn)
|
|
{
|
|
struct pci_sriov *iov = dev->sriov;
|
|
|
|
pci_write_config_word(dev, iov->pos + PCI_SRIOV_NUM_VF, nr_virtfn);
|
|
pci_read_config_word(dev, iov->pos + PCI_SRIOV_VF_OFFSET, &iov->offset);
|
|
pci_read_config_word(dev, iov->pos + PCI_SRIOV_VF_STRIDE, &iov->stride);
|
|
}
|
|
|
|
/*
|
|
* The PF consumes one bus number. NumVFs, First VF Offset, and VF Stride
|
|
* determine how many additional bus numbers will be consumed by VFs.
|
|
*
|
|
* Iterate over all valid NumVFs, validate offset and stride, and calculate
|
|
* the maximum number of bus numbers that could ever be required.
|
|
*/
|
|
static int compute_max_vf_buses(struct pci_dev *dev)
|
|
{
|
|
struct pci_sriov *iov = dev->sriov;
|
|
int nr_virtfn, busnr, rc = 0;
|
|
|
|
for (nr_virtfn = iov->total_VFs; nr_virtfn; nr_virtfn--) {
|
|
pci_iov_set_numvfs(dev, nr_virtfn);
|
|
if (!iov->offset || (nr_virtfn > 1 && !iov->stride)) {
|
|
rc = -EIO;
|
|
goto out;
|
|
}
|
|
|
|
busnr = pci_iov_virtfn_bus(dev, nr_virtfn - 1);
|
|
if (busnr > iov->max_VF_buses)
|
|
iov->max_VF_buses = busnr;
|
|
}
|
|
|
|
out:
|
|
pci_iov_set_numvfs(dev, 0);
|
|
return rc;
|
|
}
|
|
|
|
static struct pci_bus *virtfn_add_bus(struct pci_bus *bus, int busnr)
|
|
{
|
|
struct pci_bus *child;
|
|
|
|
if (bus->number == busnr)
|
|
return bus;
|
|
|
|
child = pci_find_bus(pci_domain_nr(bus), busnr);
|
|
if (child)
|
|
return child;
|
|
|
|
child = pci_add_new_bus(bus, NULL, busnr);
|
|
if (!child)
|
|
return NULL;
|
|
|
|
pci_bus_insert_busn_res(child, busnr, busnr);
|
|
|
|
return child;
|
|
}
|
|
|
|
static void virtfn_remove_bus(struct pci_bus *physbus, struct pci_bus *virtbus)
|
|
{
|
|
if (physbus != virtbus && list_empty(&virtbus->devices))
|
|
pci_remove_bus(virtbus);
|
|
}
|
|
|
|
resource_size_t pci_iov_resource_size(struct pci_dev *dev, int resno)
|
|
{
|
|
if (!dev->is_physfn)
|
|
return 0;
|
|
|
|
return dev->sriov->barsz[resno - PCI_IOV_RESOURCES];
|
|
}
|
|
|
|
static int virtfn_add(struct pci_dev *dev, int id, int reset)
|
|
{
|
|
int i;
|
|
int rc = -ENOMEM;
|
|
u64 size;
|
|
char buf[VIRTFN_ID_LEN];
|
|
struct pci_dev *virtfn;
|
|
struct resource *res;
|
|
struct pci_sriov *iov = dev->sriov;
|
|
struct pci_bus *bus;
|
|
|
|
mutex_lock(&iov->dev->sriov->lock);
|
|
bus = virtfn_add_bus(dev->bus, pci_iov_virtfn_bus(dev, id));
|
|
if (!bus)
|
|
goto failed;
|
|
|
|
virtfn = pci_alloc_dev(bus);
|
|
if (!virtfn)
|
|
goto failed0;
|
|
|
|
virtfn->devfn = pci_iov_virtfn_devfn(dev, id);
|
|
virtfn->vendor = dev->vendor;
|
|
pci_read_config_word(dev, iov->pos + PCI_SRIOV_VF_DID, &virtfn->device);
|
|
pci_setup_device(virtfn);
|
|
virtfn->dev.parent = dev->dev.parent;
|
|
virtfn->physfn = pci_dev_get(dev);
|
|
virtfn->is_virtfn = 1;
|
|
virtfn->multifunction = 0;
|
|
|
|
for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) {
|
|
res = &dev->resource[i + PCI_IOV_RESOURCES];
|
|
if (!res->parent)
|
|
continue;
|
|
virtfn->resource[i].name = pci_name(virtfn);
|
|
virtfn->resource[i].flags = res->flags;
|
|
size = pci_iov_resource_size(dev, i + PCI_IOV_RESOURCES);
|
|
virtfn->resource[i].start = res->start + size * id;
|
|
virtfn->resource[i].end = virtfn->resource[i].start + size - 1;
|
|
rc = request_resource(res, &virtfn->resource[i]);
|
|
BUG_ON(rc);
|
|
}
|
|
|
|
if (reset)
|
|
__pci_reset_function(virtfn);
|
|
|
|
pci_device_add(virtfn, virtfn->bus);
|
|
mutex_unlock(&iov->dev->sriov->lock);
|
|
|
|
pci_bus_add_device(virtfn);
|
|
sprintf(buf, "virtfn%u", id);
|
|
rc = sysfs_create_link(&dev->dev.kobj, &virtfn->dev.kobj, buf);
|
|
if (rc)
|
|
goto failed1;
|
|
rc = sysfs_create_link(&virtfn->dev.kobj, &dev->dev.kobj, "physfn");
|
|
if (rc)
|
|
goto failed2;
|
|
|
|
kobject_uevent(&virtfn->dev.kobj, KOBJ_CHANGE);
|
|
|
|
return 0;
|
|
|
|
failed2:
|
|
sysfs_remove_link(&dev->dev.kobj, buf);
|
|
failed1:
|
|
pci_dev_put(dev);
|
|
mutex_lock(&iov->dev->sriov->lock);
|
|
pci_stop_and_remove_bus_device(virtfn);
|
|
failed0:
|
|
virtfn_remove_bus(dev->bus, bus);
|
|
failed:
|
|
mutex_unlock(&iov->dev->sriov->lock);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static void virtfn_remove(struct pci_dev *dev, int id, int reset)
|
|
{
|
|
char buf[VIRTFN_ID_LEN];
|
|
struct pci_dev *virtfn;
|
|
struct pci_sriov *iov = dev->sriov;
|
|
|
|
virtfn = pci_get_domain_bus_and_slot(pci_domain_nr(dev->bus),
|
|
pci_iov_virtfn_bus(dev, id),
|
|
pci_iov_virtfn_devfn(dev, id));
|
|
if (!virtfn)
|
|
return;
|
|
|
|
if (reset) {
|
|
device_release_driver(&virtfn->dev);
|
|
__pci_reset_function(virtfn);
|
|
}
|
|
|
|
sprintf(buf, "virtfn%u", id);
|
|
sysfs_remove_link(&dev->dev.kobj, buf);
|
|
/*
|
|
* pci_stop_dev() could have been called for this virtfn already,
|
|
* so the directory for the virtfn may have been removed before.
|
|
* Double check to avoid spurious sysfs warnings.
|
|
*/
|
|
if (virtfn->dev.kobj.sd)
|
|
sysfs_remove_link(&virtfn->dev.kobj, "physfn");
|
|
|
|
mutex_lock(&iov->dev->sriov->lock);
|
|
pci_stop_and_remove_bus_device(virtfn);
|
|
virtfn_remove_bus(dev->bus, virtfn->bus);
|
|
mutex_unlock(&iov->dev->sriov->lock);
|
|
|
|
/* balance pci_get_domain_bus_and_slot() */
|
|
pci_dev_put(virtfn);
|
|
pci_dev_put(dev);
|
|
}
|
|
|
|
int __weak pcibios_sriov_enable(struct pci_dev *pdev, u16 num_vfs)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
int __weak pcibios_sriov_disable(struct pci_dev *pdev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int sriov_enable(struct pci_dev *dev, int nr_virtfn)
|
|
{
|
|
int rc;
|
|
int i;
|
|
int nres;
|
|
u16 initial;
|
|
struct resource *res;
|
|
struct pci_dev *pdev;
|
|
struct pci_sriov *iov = dev->sriov;
|
|
int bars = 0;
|
|
int bus;
|
|
|
|
if (!nr_virtfn)
|
|
return 0;
|
|
|
|
if (iov->num_VFs)
|
|
return -EINVAL;
|
|
|
|
pci_read_config_word(dev, iov->pos + PCI_SRIOV_INITIAL_VF, &initial);
|
|
if (initial > iov->total_VFs ||
|
|
(!(iov->cap & PCI_SRIOV_CAP_VFM) && (initial != iov->total_VFs)))
|
|
return -EIO;
|
|
|
|
if (nr_virtfn < 0 || nr_virtfn > iov->total_VFs ||
|
|
(!(iov->cap & PCI_SRIOV_CAP_VFM) && (nr_virtfn > initial)))
|
|
return -EINVAL;
|
|
|
|
nres = 0;
|
|
for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) {
|
|
bars |= (1 << (i + PCI_IOV_RESOURCES));
|
|
res = &dev->resource[i + PCI_IOV_RESOURCES];
|
|
if (res->parent)
|
|
nres++;
|
|
}
|
|
if (nres != iov->nres) {
|
|
dev_err(&dev->dev, "not enough MMIO resources for SR-IOV\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
bus = pci_iov_virtfn_bus(dev, nr_virtfn - 1);
|
|
if (bus > dev->bus->busn_res.end) {
|
|
dev_err(&dev->dev, "can't enable %d VFs (bus %02x out of range of %pR)\n",
|
|
nr_virtfn, bus, &dev->bus->busn_res);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
if (pci_enable_resources(dev, bars)) {
|
|
dev_err(&dev->dev, "SR-IOV: IOV BARS not allocated\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
if (iov->link != dev->devfn) {
|
|
pdev = pci_get_slot(dev->bus, iov->link);
|
|
if (!pdev)
|
|
return -ENODEV;
|
|
|
|
if (!pdev->is_physfn) {
|
|
pci_dev_put(pdev);
|
|
return -ENOSYS;
|
|
}
|
|
|
|
rc = sysfs_create_link(&dev->dev.kobj,
|
|
&pdev->dev.kobj, "dep_link");
|
|
pci_dev_put(pdev);
|
|
if (rc)
|
|
return rc;
|
|
}
|
|
|
|
pci_iov_set_numvfs(dev, nr_virtfn);
|
|
iov->ctrl |= PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE;
|
|
pci_cfg_access_lock(dev);
|
|
pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl);
|
|
msleep(100);
|
|
pci_cfg_access_unlock(dev);
|
|
|
|
iov->initial_VFs = initial;
|
|
if (nr_virtfn < initial)
|
|
initial = nr_virtfn;
|
|
|
|
rc = pcibios_sriov_enable(dev, initial);
|
|
if (rc) {
|
|
dev_err(&dev->dev, "failure %d from pcibios_sriov_enable()\n", rc);
|
|
goto err_pcibios;
|
|
}
|
|
|
|
for (i = 0; i < initial; i++) {
|
|
rc = virtfn_add(dev, i, 0);
|
|
if (rc)
|
|
goto failed;
|
|
}
|
|
|
|
kobject_uevent(&dev->dev.kobj, KOBJ_CHANGE);
|
|
iov->num_VFs = nr_virtfn;
|
|
|
|
return 0;
|
|
|
|
failed:
|
|
while (i--)
|
|
virtfn_remove(dev, i, 0);
|
|
|
|
pcibios_sriov_disable(dev);
|
|
err_pcibios:
|
|
iov->ctrl &= ~(PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE);
|
|
pci_cfg_access_lock(dev);
|
|
pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl);
|
|
ssleep(1);
|
|
pci_cfg_access_unlock(dev);
|
|
|
|
if (iov->link != dev->devfn)
|
|
sysfs_remove_link(&dev->dev.kobj, "dep_link");
|
|
|
|
pci_iov_set_numvfs(dev, 0);
|
|
return rc;
|
|
}
|
|
|
|
static void sriov_disable(struct pci_dev *dev)
|
|
{
|
|
int i;
|
|
struct pci_sriov *iov = dev->sriov;
|
|
|
|
if (!iov->num_VFs)
|
|
return;
|
|
|
|
for (i = 0; i < iov->num_VFs; i++)
|
|
virtfn_remove(dev, i, 0);
|
|
|
|
pcibios_sriov_disable(dev);
|
|
|
|
iov->ctrl &= ~(PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE);
|
|
pci_cfg_access_lock(dev);
|
|
pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl);
|
|
ssleep(1);
|
|
pci_cfg_access_unlock(dev);
|
|
|
|
if (iov->link != dev->devfn)
|
|
sysfs_remove_link(&dev->dev.kobj, "dep_link");
|
|
|
|
iov->num_VFs = 0;
|
|
pci_iov_set_numvfs(dev, 0);
|
|
}
|
|
|
|
static int sriov_init(struct pci_dev *dev, int pos)
|
|
{
|
|
int i, bar64;
|
|
int rc;
|
|
int nres;
|
|
u32 pgsz;
|
|
u16 ctrl, total;
|
|
struct pci_sriov *iov;
|
|
struct resource *res;
|
|
struct pci_dev *pdev;
|
|
|
|
if (pci_pcie_type(dev) != PCI_EXP_TYPE_RC_END &&
|
|
pci_pcie_type(dev) != PCI_EXP_TYPE_ENDPOINT)
|
|
return -ENODEV;
|
|
|
|
pci_read_config_word(dev, pos + PCI_SRIOV_CTRL, &ctrl);
|
|
if (ctrl & PCI_SRIOV_CTRL_VFE) {
|
|
pci_write_config_word(dev, pos + PCI_SRIOV_CTRL, 0);
|
|
ssleep(1);
|
|
}
|
|
|
|
ctrl = 0;
|
|
list_for_each_entry(pdev, &dev->bus->devices, bus_list)
|
|
if (pdev->is_physfn)
|
|
goto found;
|
|
|
|
pdev = NULL;
|
|
if (pci_ari_enabled(dev->bus))
|
|
ctrl |= PCI_SRIOV_CTRL_ARI;
|
|
|
|
found:
|
|
pci_write_config_word(dev, pos + PCI_SRIOV_CTRL, ctrl);
|
|
|
|
pci_read_config_word(dev, pos + PCI_SRIOV_TOTAL_VF, &total);
|
|
if (!total)
|
|
return 0;
|
|
|
|
pci_read_config_dword(dev, pos + PCI_SRIOV_SUP_PGSIZE, &pgsz);
|
|
i = PAGE_SHIFT > 12 ? PAGE_SHIFT - 12 : 0;
|
|
pgsz &= ~((1 << i) - 1);
|
|
if (!pgsz)
|
|
return -EIO;
|
|
|
|
pgsz &= ~(pgsz - 1);
|
|
pci_write_config_dword(dev, pos + PCI_SRIOV_SYS_PGSIZE, pgsz);
|
|
|
|
iov = kzalloc(sizeof(*iov), GFP_KERNEL);
|
|
if (!iov)
|
|
return -ENOMEM;
|
|
|
|
nres = 0;
|
|
for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) {
|
|
res = &dev->resource[i + PCI_IOV_RESOURCES];
|
|
/*
|
|
* If it is already FIXED, don't change it, something
|
|
* (perhaps EA or header fixups) wants it this way.
|
|
*/
|
|
if (res->flags & IORESOURCE_PCI_FIXED)
|
|
bar64 = (res->flags & IORESOURCE_MEM_64) ? 1 : 0;
|
|
else
|
|
bar64 = __pci_read_base(dev, pci_bar_unknown, res,
|
|
pos + PCI_SRIOV_BAR + i * 4);
|
|
if (!res->flags)
|
|
continue;
|
|
if (resource_size(res) & (PAGE_SIZE - 1)) {
|
|
rc = -EIO;
|
|
goto failed;
|
|
}
|
|
iov->barsz[i] = resource_size(res);
|
|
res->end = res->start + resource_size(res) * total - 1;
|
|
dev_info(&dev->dev, "VF(n) BAR%d space: %pR (contains BAR%d for %d VFs)\n",
|
|
i, res, i, total);
|
|
i += bar64;
|
|
nres++;
|
|
}
|
|
|
|
iov->pos = pos;
|
|
iov->nres = nres;
|
|
iov->ctrl = ctrl;
|
|
iov->total_VFs = total;
|
|
iov->pgsz = pgsz;
|
|
iov->self = dev;
|
|
pci_read_config_dword(dev, pos + PCI_SRIOV_CAP, &iov->cap);
|
|
pci_read_config_byte(dev, pos + PCI_SRIOV_FUNC_LINK, &iov->link);
|
|
if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_END)
|
|
iov->link = PCI_DEVFN(PCI_SLOT(dev->devfn), iov->link);
|
|
|
|
if (pdev)
|
|
iov->dev = pci_dev_get(pdev);
|
|
else
|
|
iov->dev = dev;
|
|
|
|
mutex_init(&iov->lock);
|
|
|
|
dev->sriov = iov;
|
|
dev->is_physfn = 1;
|
|
rc = compute_max_vf_buses(dev);
|
|
if (rc)
|
|
goto fail_max_buses;
|
|
|
|
return 0;
|
|
|
|
fail_max_buses:
|
|
dev->sriov = NULL;
|
|
dev->is_physfn = 0;
|
|
failed:
|
|
for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) {
|
|
res = &dev->resource[i + PCI_IOV_RESOURCES];
|
|
res->flags = 0;
|
|
}
|
|
|
|
kfree(iov);
|
|
return rc;
|
|
}
|
|
|
|
static void sriov_release(struct pci_dev *dev)
|
|
{
|
|
BUG_ON(dev->sriov->num_VFs);
|
|
|
|
if (dev != dev->sriov->dev)
|
|
pci_dev_put(dev->sriov->dev);
|
|
|
|
mutex_destroy(&dev->sriov->lock);
|
|
|
|
kfree(dev->sriov);
|
|
dev->sriov = NULL;
|
|
}
|
|
|
|
static void sriov_restore_state(struct pci_dev *dev)
|
|
{
|
|
int i;
|
|
u16 ctrl;
|
|
struct pci_sriov *iov = dev->sriov;
|
|
|
|
pci_read_config_word(dev, iov->pos + PCI_SRIOV_CTRL, &ctrl);
|
|
if (ctrl & PCI_SRIOV_CTRL_VFE)
|
|
return;
|
|
|
|
for (i = PCI_IOV_RESOURCES; i <= PCI_IOV_RESOURCE_END; i++)
|
|
pci_update_resource(dev, i);
|
|
|
|
pci_write_config_dword(dev, iov->pos + PCI_SRIOV_SYS_PGSIZE, iov->pgsz);
|
|
pci_iov_set_numvfs(dev, iov->num_VFs);
|
|
pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl);
|
|
if (iov->ctrl & PCI_SRIOV_CTRL_VFE)
|
|
msleep(100);
|
|
}
|
|
|
|
/**
|
|
* pci_iov_init - initialize the IOV capability
|
|
* @dev: the PCI device
|
|
*
|
|
* Returns 0 on success, or negative on failure.
|
|
*/
|
|
int pci_iov_init(struct pci_dev *dev)
|
|
{
|
|
int pos;
|
|
|
|
if (!pci_is_pcie(dev))
|
|
return -ENODEV;
|
|
|
|
pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_SRIOV);
|
|
if (pos)
|
|
return sriov_init(dev, pos);
|
|
|
|
return -ENODEV;
|
|
}
|
|
|
|
/**
|
|
* pci_iov_release - release resources used by the IOV capability
|
|
* @dev: the PCI device
|
|
*/
|
|
void pci_iov_release(struct pci_dev *dev)
|
|
{
|
|
if (dev->is_physfn)
|
|
sriov_release(dev);
|
|
}
|
|
|
|
/**
|
|
* pci_iov_resource_bar - get position of the SR-IOV BAR
|
|
* @dev: the PCI device
|
|
* @resno: the resource number
|
|
*
|
|
* Returns position of the BAR encapsulated in the SR-IOV capability.
|
|
*/
|
|
int pci_iov_resource_bar(struct pci_dev *dev, int resno)
|
|
{
|
|
if (resno < PCI_IOV_RESOURCES || resno > PCI_IOV_RESOURCE_END)
|
|
return 0;
|
|
|
|
BUG_ON(!dev->is_physfn);
|
|
|
|
return dev->sriov->pos + PCI_SRIOV_BAR +
|
|
4 * (resno - PCI_IOV_RESOURCES);
|
|
}
|
|
|
|
resource_size_t __weak pcibios_iov_resource_alignment(struct pci_dev *dev,
|
|
int resno)
|
|
{
|
|
return pci_iov_resource_size(dev, resno);
|
|
}
|
|
|
|
/**
|
|
* pci_sriov_resource_alignment - get resource alignment for VF BAR
|
|
* @dev: the PCI device
|
|
* @resno: the resource number
|
|
*
|
|
* Returns the alignment of the VF BAR found in the SR-IOV capability.
|
|
* This is not the same as the resource size which is defined as
|
|
* the VF BAR size multiplied by the number of VFs. The alignment
|
|
* is just the VF BAR size.
|
|
*/
|
|
resource_size_t pci_sriov_resource_alignment(struct pci_dev *dev, int resno)
|
|
{
|
|
return pcibios_iov_resource_alignment(dev, resno);
|
|
}
|
|
|
|
/**
|
|
* pci_restore_iov_state - restore the state of the IOV capability
|
|
* @dev: the PCI device
|
|
*/
|
|
void pci_restore_iov_state(struct pci_dev *dev)
|
|
{
|
|
if (dev->is_physfn)
|
|
sriov_restore_state(dev);
|
|
}
|
|
|
|
/**
|
|
* pci_iov_bus_range - find bus range used by Virtual Function
|
|
* @bus: the PCI bus
|
|
*
|
|
* Returns max number of buses (exclude current one) used by Virtual
|
|
* Functions.
|
|
*/
|
|
int pci_iov_bus_range(struct pci_bus *bus)
|
|
{
|
|
int max = 0;
|
|
struct pci_dev *dev;
|
|
|
|
list_for_each_entry(dev, &bus->devices, bus_list) {
|
|
if (!dev->is_physfn)
|
|
continue;
|
|
if (dev->sriov->max_VF_buses > max)
|
|
max = dev->sriov->max_VF_buses;
|
|
}
|
|
|
|
return max ? max - bus->number : 0;
|
|
}
|
|
|
|
/**
|
|
* pci_enable_sriov - enable the SR-IOV capability
|
|
* @dev: the PCI device
|
|
* @nr_virtfn: number of virtual functions to enable
|
|
*
|
|
* Returns 0 on success, or negative on failure.
|
|
*/
|
|
int pci_enable_sriov(struct pci_dev *dev, int nr_virtfn)
|
|
{
|
|
might_sleep();
|
|
|
|
if (!dev->is_physfn)
|
|
return -ENOSYS;
|
|
|
|
return sriov_enable(dev, nr_virtfn);
|
|
}
|
|
EXPORT_SYMBOL_GPL(pci_enable_sriov);
|
|
|
|
/**
|
|
* pci_disable_sriov - disable the SR-IOV capability
|
|
* @dev: the PCI device
|
|
*/
|
|
void pci_disable_sriov(struct pci_dev *dev)
|
|
{
|
|
might_sleep();
|
|
|
|
if (!dev->is_physfn)
|
|
return;
|
|
|
|
sriov_disable(dev);
|
|
}
|
|
EXPORT_SYMBOL_GPL(pci_disable_sriov);
|
|
|
|
/**
|
|
* pci_num_vf - return number of VFs associated with a PF device_release_driver
|
|
* @dev: the PCI device
|
|
*
|
|
* Returns number of VFs, or 0 if SR-IOV is not enabled.
|
|
*/
|
|
int pci_num_vf(struct pci_dev *dev)
|
|
{
|
|
if (!dev->is_physfn)
|
|
return 0;
|
|
|
|
return dev->sriov->num_VFs;
|
|
}
|
|
EXPORT_SYMBOL_GPL(pci_num_vf);
|
|
|
|
/**
|
|
* pci_vfs_assigned - returns number of VFs are assigned to a guest
|
|
* @dev: the PCI device
|
|
*
|
|
* Returns number of VFs belonging to this device that are assigned to a guest.
|
|
* If device is not a physical function returns 0.
|
|
*/
|
|
int pci_vfs_assigned(struct pci_dev *dev)
|
|
{
|
|
struct pci_dev *vfdev;
|
|
unsigned int vfs_assigned = 0;
|
|
unsigned short dev_id;
|
|
|
|
/* only search if we are a PF */
|
|
if (!dev->is_physfn)
|
|
return 0;
|
|
|
|
/*
|
|
* determine the device ID for the VFs, the vendor ID will be the
|
|
* same as the PF so there is no need to check for that one
|
|
*/
|
|
pci_read_config_word(dev, dev->sriov->pos + PCI_SRIOV_VF_DID, &dev_id);
|
|
|
|
/* loop through all the VFs to see if we own any that are assigned */
|
|
vfdev = pci_get_device(dev->vendor, dev_id, NULL);
|
|
while (vfdev) {
|
|
/*
|
|
* It is considered assigned if it is a virtual function with
|
|
* our dev as the physical function and the assigned bit is set
|
|
*/
|
|
if (vfdev->is_virtfn && (vfdev->physfn == dev) &&
|
|
pci_is_dev_assigned(vfdev))
|
|
vfs_assigned++;
|
|
|
|
vfdev = pci_get_device(dev->vendor, dev_id, vfdev);
|
|
}
|
|
|
|
return vfs_assigned;
|
|
}
|
|
EXPORT_SYMBOL_GPL(pci_vfs_assigned);
|
|
|
|
/**
|
|
* pci_sriov_set_totalvfs -- reduce the TotalVFs available
|
|
* @dev: the PCI PF device
|
|
* @numvfs: number that should be used for TotalVFs supported
|
|
*
|
|
* Should be called from PF driver's probe routine with
|
|
* device's mutex held.
|
|
*
|
|
* Returns 0 if PF is an SRIOV-capable device and
|
|
* value of numvfs valid. If not a PF return -ENOSYS;
|
|
* if numvfs is invalid return -EINVAL;
|
|
* if VFs already enabled, return -EBUSY.
|
|
*/
|
|
int pci_sriov_set_totalvfs(struct pci_dev *dev, u16 numvfs)
|
|
{
|
|
if (!dev->is_physfn)
|
|
return -ENOSYS;
|
|
if (numvfs > dev->sriov->total_VFs)
|
|
return -EINVAL;
|
|
|
|
/* Shouldn't change if VFs already enabled */
|
|
if (dev->sriov->ctrl & PCI_SRIOV_CTRL_VFE)
|
|
return -EBUSY;
|
|
else
|
|
dev->sriov->driver_max_VFs = numvfs;
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(pci_sriov_set_totalvfs);
|
|
|
|
/**
|
|
* pci_sriov_get_totalvfs -- get total VFs supported on this device
|
|
* @dev: the PCI PF device
|
|
*
|
|
* For a PCIe device with SRIOV support, return the PCIe
|
|
* SRIOV capability value of TotalVFs or the value of driver_max_VFs
|
|
* if the driver reduced it. Otherwise 0.
|
|
*/
|
|
int pci_sriov_get_totalvfs(struct pci_dev *dev)
|
|
{
|
|
if (!dev->is_physfn)
|
|
return 0;
|
|
|
|
if (dev->sriov->driver_max_VFs)
|
|
return dev->sriov->driver_max_VFs;
|
|
|
|
return dev->sriov->total_VFs;
|
|
}
|
|
EXPORT_SYMBOL_GPL(pci_sriov_get_totalvfs);
|