linux/drivers/net/can/vcan.c
Oliver Hartkopp 0ae89beb28 can: add destructor for self generated skbs
Self generated skbuffs in net/can/bcm.c are setting a skb->sk reference but
no explicit destructor which is enforced since Linux 3.11 with commit
376c7311bd (net: add a temporary sanity check in skb_orphan()).

This patch adds some helper functions to make sure that a destructor is
properly defined when a sock reference is assigned to a CAN related skb.
To create an unshared skb owned by the original sock a common helper function
has been introduced to replace open coded functions to create CAN echo skbs.

Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Tested-by: Andre Naujoks <nautsch2@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-30 16:25:49 -08:00

191 lines
5.3 KiB
C

/*
* vcan.c - Virtual CAN interface
*
* Copyright (c) 2002-2007 Volkswagen Group Electronic Research
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of Volkswagen nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* Alternatively, provided that this notice is retained in full, this
* software may be distributed under the terms of the GNU General
* Public License ("GPL") version 2, in which case the provisions of the
* GPL apply INSTEAD OF those given above.
*
* The provided data structures and external interfaces from this code
* are not restricted to be used by modules with a GPL compatible license.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
* DAMAGE.
*
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/netdevice.h>
#include <linux/if_arp.h>
#include <linux/if_ether.h>
#include <linux/can.h>
#include <linux/can/dev.h>
#include <linux/can/skb.h>
#include <linux/slab.h>
#include <net/rtnetlink.h>
static __initconst const char banner[] =
KERN_INFO "vcan: Virtual CAN interface driver\n";
MODULE_DESCRIPTION("virtual CAN interface");
MODULE_LICENSE("Dual BSD/GPL");
MODULE_AUTHOR("Urs Thuermann <urs.thuermann@volkswagen.de>");
/*
* CAN test feature:
* Enable the echo on driver level for testing the CAN core echo modes.
* See Documentation/networking/can.txt for details.
*/
static bool echo; /* echo testing. Default: 0 (Off) */
module_param(echo, bool, S_IRUGO);
MODULE_PARM_DESC(echo, "Echo sent frames (for testing). Default: 0 (Off)");
static void vcan_rx(struct sk_buff *skb, struct net_device *dev)
{
struct canfd_frame *cfd = (struct canfd_frame *)skb->data;
struct net_device_stats *stats = &dev->stats;
stats->rx_packets++;
stats->rx_bytes += cfd->len;
skb->pkt_type = PACKET_BROADCAST;
skb->dev = dev;
skb->ip_summed = CHECKSUM_UNNECESSARY;
netif_rx_ni(skb);
}
static netdev_tx_t vcan_tx(struct sk_buff *skb, struct net_device *dev)
{
struct canfd_frame *cfd = (struct canfd_frame *)skb->data;
struct net_device_stats *stats = &dev->stats;
int loop;
if (can_dropped_invalid_skb(dev, skb))
return NETDEV_TX_OK;
stats->tx_packets++;
stats->tx_bytes += cfd->len;
/* set flag whether this packet has to be looped back */
loop = skb->pkt_type == PACKET_LOOPBACK;
if (!echo) {
/* no echo handling available inside this driver */
if (loop) {
/*
* only count the packets here, because the
* CAN core already did the echo for us
*/
stats->rx_packets++;
stats->rx_bytes += cfd->len;
}
consume_skb(skb);
return NETDEV_TX_OK;
}
/* perform standard echo handling for CAN network interfaces */
if (loop) {
skb = can_create_echo_skb(skb);
if (!skb)
return NETDEV_TX_OK;
/* receive with packet counting */
vcan_rx(skb, dev);
} else {
/* no looped packets => no counting */
consume_skb(skb);
}
return NETDEV_TX_OK;
}
static int vcan_change_mtu(struct net_device *dev, int new_mtu)
{
/* Do not allow changing the MTU while running */
if (dev->flags & IFF_UP)
return -EBUSY;
if (new_mtu != CAN_MTU && new_mtu != CANFD_MTU)
return -EINVAL;
dev->mtu = new_mtu;
return 0;
}
static const struct net_device_ops vcan_netdev_ops = {
.ndo_start_xmit = vcan_tx,
.ndo_change_mtu = vcan_change_mtu,
};
static void vcan_setup(struct net_device *dev)
{
dev->type = ARPHRD_CAN;
dev->mtu = CAN_MTU;
dev->hard_header_len = 0;
dev->addr_len = 0;
dev->tx_queue_len = 0;
dev->flags = IFF_NOARP;
/* set flags according to driver capabilities */
if (echo)
dev->flags |= IFF_ECHO;
dev->netdev_ops = &vcan_netdev_ops;
dev->destructor = free_netdev;
}
static struct rtnl_link_ops vcan_link_ops __read_mostly = {
.kind = "vcan",
.setup = vcan_setup,
};
static __init int vcan_init_module(void)
{
printk(banner);
if (echo)
printk(KERN_INFO "vcan: enabled echo on driver level.\n");
return rtnl_link_register(&vcan_link_ops);
}
static __exit void vcan_cleanup_module(void)
{
rtnl_link_unregister(&vcan_link_ops);
}
module_init(vcan_init_module);
module_exit(vcan_cleanup_module);